drivers/pwm/pwm-imx-tpm.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2018-2019 NXP.
   4  *
   5  * Limitations:
   6  * - The TPM counter and period counter are shared between
   7  *   multiple channels, so all channels should use same period
   8  *   settings.
   9  * - Changes to polarity cannot be latched at the time of the
  10  *   next period start.
  11  * - Changing period and duty cycle together isn't atomic,
  12  *   with the wrong timing it might happen that a period is
  13  *   produced with old duty cycle but new period settings.
  14  */
  15
  16 #include <linux/bitfield.h>
  17 #include <linux/bitops.h>
  18 #include <linux/clk.h>
  19 #include <linux/err.h>
  20 #include <linux/io.h>
  21 #include <linux/module.h>
  22 #include <linux/of.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/pwm.h>
  25 #include <linux/slab.h>
  26
  27 #define PWM_IMX_TPM_PARAM       0x4
  28 #define PWM_IMX_TPM_GLOBAL      0x8
  29 #define PWM_IMX_TPM_SC          0x10
  30 #define PWM_IMX_TPM_CNT         0x14
  31 #define PWM_IMX_TPM_MOD         0x18
  32 #define PWM_IMX_TPM_CnSC(n)     (0x20 + (n) * 0x8)
  33 #define PWM_IMX_TPM_CnV(n)      (0x24 + (n) * 0x8)
  34
  35 #define PWM_IMX_TPM_PARAM_CHAN                  GENMASK(7, 0)
  36
  37 #define PWM_IMX_TPM_SC_PS                       GENMASK(2, 0)
  38 #define PWM_IMX_TPM_SC_CMOD                     GENMASK(4, 3)
  39 #define PWM_IMX_TPM_SC_CMOD_INC_EVERY_CLK       FIELD_PREP(PWM_IMX_TPM_SC_CMOD, 1)
  40 #define PWM_IMX_TPM_SC_CPWMS                    BIT(5)
  41
  42 #define PWM_IMX_TPM_CnSC_CHF    BIT(7)
  43 #define PWM_IMX_TPM_CnSC_MSB    BIT(5)
  44 #define PWM_IMX_TPM_CnSC_MSA    BIT(4)
  45
  46 /*
  47  * The reference manual describes this field as two separate bits. The
  48  * semantic of the two bits isn't orthogonal though, so they are treated
  49  * together as a 2-bit field here.
  50  */
  51 #define PWM_IMX_TPM_CnSC_ELS    GENMASK(3, 2)
  52 #define PWM_IMX_TPM_CnSC_ELS_INVERSED   FIELD_PREP(PWM_IMX_TPM_CnSC_ELS, 1)
  53 #define PWM_IMX_TPM_CnSC_ELS_NORMAL     FIELD_PREP(PWM_IMX_TPM_CnSC_ELS, 2)
  54
  55
  56 #define PWM_IMX_TPM_MOD_WIDTH   16
  57 #define PWM_IMX_TPM_MOD_MOD     GENMASK(PWM_IMX_TPM_MOD_WIDTH - 1, 0)
  58
  59 struct imx_tpm_pwm_chip {
  60         struct pwm_chip chip;
  61         struct clk *clk;
  62         void __iomem *base;
  63         struct mutex lock;
  64         u32 user_count;
  65         u32 enable_count;
  66         u32 real_period;
  67 };
  68
  69 struct imx_tpm_pwm_param {
  70         u8 prescale;
  71         u32 mod;
  72         u32 val;
  73 };
  74
  75 static inline struct imx_tpm_pwm_chip *
  76 to_imx_tpm_pwm_chip(struct pwm_chip *chip)
  77 {
  78         return container_of(chip, struct imx_tpm_pwm_chip, chip);
  79 }
  80
  81 /*
  82  * This function determines for a given pwm_state *state that a consumer
  83  * might request the pwm_state *real_state that eventually is implemented
  84  * by the hardware and the necessary register values (in *p) to achieve
  85  * this.
  86  */
  87 static int pwm_imx_tpm_round_state(struct pwm_chip *chip,
  88                                    struct imx_tpm_pwm_param *p,
  89                                    struct pwm_state *real_state,
  90                                    const struct pwm_state *state)
  91 {
  92         struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
  93         u32 rate, prescale, period_count, clock_unit;
  94         u64 tmp;
  95
  96         rate = clk_get_rate(tpm->clk);
  97         tmp = (u64)state->period * rate;
  98         clock_unit = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC);
  99         if (clock_unit <= PWM_IMX_TPM_MOD_MOD)
 100                 prescale = 0;
 101         else
 102                 prescale = ilog2(clock_unit) + 1 - PWM_IMX_TPM_MOD_WIDTH;
 103
 104         if ((!FIELD_FIT(PWM_IMX_TPM_SC_PS, prescale)))
 105                 return -ERANGE;
 106         p->prescale = prescale;
 107
 108         period_count = (clock_unit + ((1 << prescale) >> 1)) >> prescale;
 109         p->mod = period_count;
 110
 111         /* calculate real period HW can support */
 112         tmp = (u64)period_count << prescale;
 113         tmp *= NSEC_PER_SEC;
 114         real_state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
 115
 116         /*
 117          * if eventually the PWM output is inactive, either
 118          * duty cycle is 0 or status is disabled, need to
 119          * make sure the output pin is inactive.
 120          */
 121         if (!state->enabled)
 122                 real_state->duty_cycle = 0;
 123         else
 124                 real_state->duty_cycle = state->duty_cycle;
 125
 126         tmp = (u64)p->mod * real_state->duty_cycle;
 127         p->val = DIV64_U64_ROUND_CLOSEST(tmp, real_state->period);
 128
 129         real_state->polarity = state->polarity;
 130         real_state->enabled = state->enabled;
 131
 132         return 0;
 133 }
 134
 135 static void pwm_imx_tpm_get_state(struct pwm_chip *chip,
 136                                   struct pwm_device *pwm,
 137                                   struct pwm_state *state)
 138 {
 139         struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
 140         u32 rate, val, prescale;
 141         u64 tmp;
 142
 143         /* get period */
 144         state->period = tpm->real_period;
 145
 146         /* get duty cycle */
 147         rate = clk_get_rate(tpm->clk);
 148         val = readl(tpm->base + PWM_IMX_TPM_SC);
 149         prescale = FIELD_GET(PWM_IMX_TPM_SC_PS, val);
 150         tmp = readl(tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm));
 151         tmp = (tmp << prescale) * NSEC_PER_SEC;
 152         state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
 153
 154         /* get polarity */
 155         val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
 156         if ((val & PWM_IMX_TPM_CnSC_ELS) == PWM_IMX_TPM_CnSC_ELS_INVERSED)
 157                 state->polarity = PWM_POLARITY_INVERSED;
 158         else
 159                 /*
 160                  * Assume reserved values (2b00 and 2b11) to yield
 161                  * normal polarity.
 162                  */
 163                 state->polarity = PWM_POLARITY_NORMAL;
 164
 165         /* get channel status */
 166         state->enabled = FIELD_GET(PWM_IMX_TPM_CnSC_ELS, val) ? true : false;
 167 }
 168
 169 /* this function is supposed to be called with mutex hold */
 170 static int pwm_imx_tpm_apply_hw(struct pwm_chip *chip,
 171                                 struct imx_tpm_pwm_param *p,
 172                                 struct pwm_state *state,
 173                                 struct pwm_device *pwm)
 174 {
 175         struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
 176         bool period_update = false;
 177         bool duty_update = false;
 178         u32 val, cmod, cur_prescale;
 179         unsigned long timeout;
 180         struct pwm_state c;
 181
 182         if (state->period != tpm->real_period) {
 183                 /*
 184                  * TPM counter is shared by multiple channels, so
 185                  * prescale and period can NOT be modified when
 186                  * there are multiple channels in use with different
 187                  * period settings.
 188                  */
 189                 if (tpm->user_count > 1)
 190                         return -EBUSY;
 191
 192                 val = readl(tpm->base + PWM_IMX_TPM_SC);
 193                 cmod = FIELD_GET(PWM_IMX_TPM_SC_CMOD, val);
 194                 cur_prescale = FIELD_GET(PWM_IMX_TPM_SC_PS, val);
 195                 if (cmod && cur_prescale != p->prescale)
 196                         return -EBUSY;
 197
 198                 /* set TPM counter prescale */
 199                 val &= ~PWM_IMX_TPM_SC_PS;
 200                 val |= FIELD_PREP(PWM_IMX_TPM_SC_PS, p->prescale);
 201                 writel(val, tpm->base + PWM_IMX_TPM_SC);
 202
 203                 /*
 204                  * set period count:
 205                  * if the PWM is disabled (CMOD[1:0] = 2b00), then MOD register
 206                  * is updated when MOD register is written.
 207                  *
 208                  * if the PWM is enabled (CMOD[1:0] ≠ 2b00), the period length
 209                  * is latched into hardware when the next period starts.
 210                  */
 211                 writel(p->mod, tpm->base + PWM_IMX_TPM_MOD);
 212                 tpm->real_period = state->period;
 213                 period_update = true;
 214         }
 215
 216         pwm_imx_tpm_get_state(chip, pwm, &c);
 217
 218         /* polarity is NOT allowed to be changed if PWM is active */
 219         if (c.enabled && c.polarity != state->polarity)
 220                 return -EBUSY;
 221
 222         if (state->duty_cycle != c.duty_cycle) {
 223                 /*
 224                  * set channel value:
 225                  * if the PWM is disabled (CMOD[1:0] = 2b00), then CnV register
 226                  * is updated when CnV register is written.
 227                  *
 228                  * if the PWM is enabled (CMOD[1:0] ≠ 2b00), the duty length
 229                  * is latched into hardware when the next period starts.
 230                  */
 231                 writel(p->val, tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm));
 232                 duty_update = true;
 233         }
 234
 235         /* make sure MOD & CnV registers are updated */
 236         if (period_update || duty_update) {
 237                 timeout = jiffies + msecs_to_jiffies(tpm->real_period /
 238                                                      NSEC_PER_MSEC + 1);
 239                 while (readl(tpm->base + PWM_IMX_TPM_MOD) != p->mod
 240                        || readl(tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm))
 241                        != p->val) {
 242                         if (time_after(jiffies, timeout))
 243                                 return -ETIME;
 244                         cpu_relax();
 245                 }
 246         }
 247
 248         /*
 249          * polarity settings will enabled/disable output status
 250          * immediately, so if the channel is disabled, need to
 251          * make sure MSA/MSB/ELS are set to 0 which means channel
 252          * disabled.
 253          */
 254         val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
 255         val &= ~(PWM_IMX_TPM_CnSC_ELS | PWM_IMX_TPM_CnSC_MSA |
 256                  PWM_IMX_TPM_CnSC_MSB);
 257         if (state->enabled) {
 258                 /*
 259                  * set polarity (for edge-aligned PWM modes)
 260                  *
 261                  * ELS[1:0] = 2b10 yields normal polarity behaviour,
 262                  * ELS[1:0] = 2b01 yields inversed polarity.
 263                  * The other values are reserved.
 264                  */
 265                 val |= PWM_IMX_TPM_CnSC_MSB;
 266                 val |= (state->polarity == PWM_POLARITY_NORMAL) ?
 267                         PWM_IMX_TPM_CnSC_ELS_NORMAL :
 268                         PWM_IMX_TPM_CnSC_ELS_INVERSED;
 269         }
 270         writel(val, tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
 271
 272         /* control the counter status */
 273         if (state->enabled != c.enabled) {
 274                 val = readl(tpm->base + PWM_IMX_TPM_SC);
 275                 if (state->enabled) {
 276                         if (++tpm->enable_count == 1)
 277                                 val |= PWM_IMX_TPM_SC_CMOD_INC_EVERY_CLK;
 278                 } else {
 279                         if (--tpm->enable_count == 0)
 280                                 val &= ~PWM_IMX_TPM_SC_CMOD;
 281                 }
 282                 writel(val, tpm->base + PWM_IMX_TPM_SC);
 283         }
 284
 285         return 0;
 286 }
 287
 288 static int pwm_imx_tpm_apply(struct pwm_chip *chip,
 289                              struct pwm_device *pwm,
 290                              const struct pwm_state *state)
 291 {
 292         struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
 293         struct imx_tpm_pwm_param param;
 294         struct pwm_state real_state;
 295         int ret;
 296
 297         ret = pwm_imx_tpm_round_state(chip, &param, &real_state, state);
 298         if (ret)
 299                 return ret;
 300
 301         mutex_lock(&tpm->lock);
 302         ret = pwm_imx_tpm_apply_hw(chip, &param, &real_state, pwm);
 303         mutex_unlock(&tpm->lock);
 304
 305         return ret;
 306 }
 307
 308 static int pwm_imx_tpm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 309 {
 310         struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
 311
 312         mutex_lock(&tpm->lock);
 313         tpm->user_count++;
 314         mutex_unlock(&tpm->lock);
 315
 316         return 0;
 317 }
 318
 319 static void pwm_imx_tpm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 320 {
 321         struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
 322
 323         mutex_lock(&tpm->lock);
 324         tpm->user_count--;
 325         mutex_unlock(&tpm->lock);
 326 }
 327
 328 static const struct pwm_ops imx_tpm_pwm_ops = {
 329         .request = pwm_imx_tpm_request,
 330         .free = pwm_imx_tpm_free,
 331         .get_state = pwm_imx_tpm_get_state,
 332         .apply = pwm_imx_tpm_apply,
 333         .owner = THIS_MODULE,
 334 };
 335
 336 static int pwm_imx_tpm_probe(struct platform_device *pdev)
 337 {
 338         struct imx_tpm_pwm_chip *tpm;
 339         int ret;
 340         u32 val;
 341
 342         tpm = devm_kzalloc(&pdev->dev, sizeof(*tpm), GFP_KERNEL);
 343         if (!tpm)
 344                 return -ENOMEM;
 345
 346         platform_set_drvdata(pdev, tpm);
 347
 348         tpm->base = devm_platform_ioremap_resource(pdev, 0);
 349         if (IS_ERR(tpm->base))
 350                 return PTR_ERR(tpm->base);
 351
 352         tpm->clk = devm_clk_get(&pdev->dev, NULL);
 353         if (IS_ERR(tpm->clk)) {
 354                 ret = PTR_ERR(tpm->clk);
 355                 if (ret != -EPROBE_DEFER)
 356                         dev_err(&pdev->dev,
 357                                 "failed to get PWM clock: %d\n", ret);
 358                 return ret;
 359         }
 360
 361         ret = clk_prepare_enable(tpm->clk);
 362         if (ret) {
 363                 dev_err(&pdev->dev,
 364                         "failed to prepare or enable clock: %d\n", ret);
 365                 return ret;
 366         }
 367
 368         tpm->chip.dev = &pdev->dev;
 369         tpm->chip.ops = &imx_tpm_pwm_ops;
 370         tpm->chip.base = -1;
 371         tpm->chip.of_xlate = of_pwm_xlate_with_flags;
 372         tpm->chip.of_pwm_n_cells = 3;
 373
 374         /* get number of channels */
 375         val = readl(tpm->base + PWM_IMX_TPM_PARAM);
 376         tpm->chip.npwm = FIELD_GET(PWM_IMX_TPM_PARAM_CHAN, val);
 377
 378         mutex_init(&tpm->lock);
 379
 380         ret = pwmchip_add(&tpm->chip);
 381         if (ret) {
 382                 dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
 383                 clk_disable_unprepare(tpm->clk);
 384         }
 385
 386         return ret;
 387 }
 388
 389 static int pwm_imx_tpm_remove(struct platform_device *pdev)
 390 {
 391         struct imx_tpm_pwm_chip *tpm = platform_get_drvdata(pdev);
 392         int ret = pwmchip_remove(&tpm->chip);
 393
 394         clk_disable_unprepare(tpm->clk);
 395
 396         return ret;
 397 }
 398
 399 static int __maybe_unused pwm_imx_tpm_suspend(struct device *dev)
 400 {
 401         struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
 402
 403         if (tpm->enable_count > 0)
 404                 return -EBUSY;
 405
 406         clk_disable_unprepare(tpm->clk);
 407
 408         return 0;
 409 }
 410
 411 static int __maybe_unused pwm_imx_tpm_resume(struct device *dev)
 412 {
 413         struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
 414         int ret = 0;
 415
 416         ret = clk_prepare_enable(tpm->clk);
 417         if (ret)
 418                 dev_err(dev,
 419                         "failed to prepare or enable clock: %d\n",
 420                         ret);
 421
 422         return ret;
 423 }
 424
 425 static SIMPLE_DEV_PM_OPS(imx_tpm_pwm_pm,
 426                          pwm_imx_tpm_suspend, pwm_imx_tpm_resume);
 427
 428 static const struct of_device_id imx_tpm_pwm_dt_ids[] = {
 429         { .compatible = "fsl,imx7ulp-pwm", },
 430         { /* sentinel */ }
 431 };
 432 MODULE_DEVICE_TABLE(of, imx_tpm_pwm_dt_ids);
 433
 434 static struct platform_driver imx_tpm_pwm_driver = {
 435         .driver = {
 436                 .name = "imx7ulp-tpm-pwm",
 437                 .of_match_table = imx_tpm_pwm_dt_ids,
 438                 .pm = &imx_tpm_pwm_pm,
 439         },
 440         .probe  = pwm_imx_tpm_probe,
 441         .remove = pwm_imx_tpm_remove,
 442 };
 443 module_platform_driver(imx_tpm_pwm_driver);
 444
 445 MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
 446 MODULE_DESCRIPTION("i.MX TPM PWM Driver");
 447 MODULE_LICENSE("GPL v2");