iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support
[linux/fpc-iii.git] / arch / x86 / kernel / kgdb.c
blob8e36f249646e25d20bc2bcc04b7a0ccc292e498c
1 /*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License as published by the
4 * Free Software Foundation; either version 2, or (at your option) any
5 * later version.
7 * This program is distributed in the hope that it will be useful, but
8 * WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
10 * General Public License for more details.
15 * Copyright (C) 2004 Amit S. Kale <amitkale@linsyssoft.com>
16 * Copyright (C) 2000-2001 VERITAS Software Corporation.
17 * Copyright (C) 2002 Andi Kleen, SuSE Labs
18 * Copyright (C) 2004 LinSysSoft Technologies Pvt. Ltd.
19 * Copyright (C) 2007 MontaVista Software, Inc.
20 * Copyright (C) 2007-2008 Jason Wessel, Wind River Systems, Inc.
22 /****************************************************************************
23 * Contributor: Lake Stevens Instrument Division$
24 * Written by: Glenn Engel $
25 * Updated by: Amit Kale<akale@veritas.com>
26 * Updated by: Tom Rini <trini@kernel.crashing.org>
27 * Updated by: Jason Wessel <jason.wessel@windriver.com>
28 * Modified for 386 by Jim Kingdon, Cygnus Support.
29 * Origianl kgdb, compatibility with 2.1.xx kernel by
30 * David Grothe <dave@gcom.com>
31 * Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com>
32 * X86_64 changes from Andi Kleen's patch merged by Jim Houston
34 #include <linux/spinlock.h>
35 #include <linux/kdebug.h>
36 #include <linux/string.h>
37 #include <linux/kernel.h>
38 #include <linux/ptrace.h>
39 #include <linux/sched.h>
40 #include <linux/delay.h>
41 #include <linux/kgdb.h>
42 #include <linux/smp.h>
43 #include <linux/nmi.h>
44 #include <linux/hw_breakpoint.h>
45 #include <linux/uaccess.h>
46 #include <linux/memory.h>
48 #include <asm/text-patching.h>
49 #include <asm/debugreg.h>
50 #include <asm/apicdef.h>
51 #include <asm/apic.h>
52 #include <asm/nmi.h>
53 #include <asm/switch_to.h>
55 struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
57 #ifdef CONFIG_X86_32
58 { "ax", 4, offsetof(struct pt_regs, ax) },
59 { "cx", 4, offsetof(struct pt_regs, cx) },
60 { "dx", 4, offsetof(struct pt_regs, dx) },
61 { "bx", 4, offsetof(struct pt_regs, bx) },
62 { "sp", 4, offsetof(struct pt_regs, sp) },
63 { "bp", 4, offsetof(struct pt_regs, bp) },
64 { "si", 4, offsetof(struct pt_regs, si) },
65 { "di", 4, offsetof(struct pt_regs, di) },
66 { "ip", 4, offsetof(struct pt_regs, ip) },
67 { "flags", 4, offsetof(struct pt_regs, flags) },
68 { "cs", 4, offsetof(struct pt_regs, cs) },
69 { "ss", 4, offsetof(struct pt_regs, ss) },
70 { "ds", 4, offsetof(struct pt_regs, ds) },
71 { "es", 4, offsetof(struct pt_regs, es) },
72 #else
73 { "ax", 8, offsetof(struct pt_regs, ax) },
74 { "bx", 8, offsetof(struct pt_regs, bx) },
75 { "cx", 8, offsetof(struct pt_regs, cx) },
76 { "dx", 8, offsetof(struct pt_regs, dx) },
77 { "si", 8, offsetof(struct pt_regs, si) },
78 { "di", 8, offsetof(struct pt_regs, di) },
79 { "bp", 8, offsetof(struct pt_regs, bp) },
80 { "sp", 8, offsetof(struct pt_regs, sp) },
81 { "r8", 8, offsetof(struct pt_regs, r8) },
82 { "r9", 8, offsetof(struct pt_regs, r9) },
83 { "r10", 8, offsetof(struct pt_regs, r10) },
84 { "r11", 8, offsetof(struct pt_regs, r11) },
85 { "r12", 8, offsetof(struct pt_regs, r12) },
86 { "r13", 8, offsetof(struct pt_regs, r13) },
87 { "r14", 8, offsetof(struct pt_regs, r14) },
88 { "r15", 8, offsetof(struct pt_regs, r15) },
89 { "ip", 8, offsetof(struct pt_regs, ip) },
90 { "flags", 4, offsetof(struct pt_regs, flags) },
91 { "cs", 4, offsetof(struct pt_regs, cs) },
92 { "ss", 4, offsetof(struct pt_regs, ss) },
93 { "ds", 4, -1 },
94 { "es", 4, -1 },
95 #endif
96 { "fs", 4, -1 },
97 { "gs", 4, -1 },
100 int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
102 if (
103 #ifdef CONFIG_X86_32
104 regno == GDB_SS || regno == GDB_FS || regno == GDB_GS ||
105 #endif
106 regno == GDB_SP || regno == GDB_ORIG_AX)
107 return 0;
109 if (dbg_reg_def[regno].offset != -1)
110 memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
111 dbg_reg_def[regno].size);
112 return 0;
115 char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
117 if (regno == GDB_ORIG_AX) {
118 memcpy(mem, &regs->orig_ax, sizeof(regs->orig_ax));
119 return "orig_ax";
121 if (regno >= DBG_MAX_REG_NUM || regno < 0)
122 return NULL;
124 if (dbg_reg_def[regno].offset != -1)
125 memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
126 dbg_reg_def[regno].size);
128 #ifdef CONFIG_X86_32
129 switch (regno) {
130 case GDB_SS:
131 if (!user_mode(regs))
132 *(unsigned long *)mem = __KERNEL_DS;
133 break;
134 case GDB_SP:
135 if (!user_mode(regs))
136 *(unsigned long *)mem = kernel_stack_pointer(regs);
137 break;
138 case GDB_GS:
139 case GDB_FS:
140 *(unsigned long *)mem = 0xFFFF;
141 break;
143 #endif
144 return dbg_reg_def[regno].name;
148 * sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
149 * @gdb_regs: A pointer to hold the registers in the order GDB wants.
150 * @p: The &struct task_struct of the desired process.
152 * Convert the register values of the sleeping process in @p to
153 * the format that GDB expects.
154 * This function is called when kgdb does not have access to the
155 * &struct pt_regs and therefore it should fill the gdb registers
156 * @gdb_regs with what has been saved in &struct thread_struct
157 * thread field during switch_to.
159 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
161 #ifndef CONFIG_X86_32
162 u32 *gdb_regs32 = (u32 *)gdb_regs;
163 #endif
164 gdb_regs[GDB_AX] = 0;
165 gdb_regs[GDB_BX] = 0;
166 gdb_regs[GDB_CX] = 0;
167 gdb_regs[GDB_DX] = 0;
168 gdb_regs[GDB_SI] = 0;
169 gdb_regs[GDB_DI] = 0;
170 gdb_regs[GDB_BP] = ((struct inactive_task_frame *)p->thread.sp)->bp;
171 #ifdef CONFIG_X86_32
172 gdb_regs[GDB_DS] = __KERNEL_DS;
173 gdb_regs[GDB_ES] = __KERNEL_DS;
174 gdb_regs[GDB_PS] = 0;
175 gdb_regs[GDB_CS] = __KERNEL_CS;
176 gdb_regs[GDB_SS] = __KERNEL_DS;
177 gdb_regs[GDB_FS] = 0xFFFF;
178 gdb_regs[GDB_GS] = 0xFFFF;
179 #else
180 gdb_regs32[GDB_PS] = 0;
181 gdb_regs32[GDB_CS] = __KERNEL_CS;
182 gdb_regs32[GDB_SS] = __KERNEL_DS;
183 gdb_regs[GDB_R8] = 0;
184 gdb_regs[GDB_R9] = 0;
185 gdb_regs[GDB_R10] = 0;
186 gdb_regs[GDB_R11] = 0;
187 gdb_regs[GDB_R12] = 0;
188 gdb_regs[GDB_R13] = 0;
189 gdb_regs[GDB_R14] = 0;
190 gdb_regs[GDB_R15] = 0;
191 #endif
192 gdb_regs[GDB_PC] = 0;
193 gdb_regs[GDB_SP] = p->thread.sp;
196 static struct hw_breakpoint {
197 unsigned enabled;
198 unsigned long addr;
199 int len;
200 int type;
201 struct perf_event * __percpu *pev;
202 } breakinfo[HBP_NUM];
204 static unsigned long early_dr7;
206 static void kgdb_correct_hw_break(void)
208 int breakno;
210 for (breakno = 0; breakno < HBP_NUM; breakno++) {
211 struct perf_event *bp;
212 struct arch_hw_breakpoint *info;
213 int val;
214 int cpu = raw_smp_processor_id();
215 if (!breakinfo[breakno].enabled)
216 continue;
217 if (dbg_is_early) {
218 set_debugreg(breakinfo[breakno].addr, breakno);
219 early_dr7 |= encode_dr7(breakno,
220 breakinfo[breakno].len,
221 breakinfo[breakno].type);
222 set_debugreg(early_dr7, 7);
223 continue;
225 bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu);
226 info = counter_arch_bp(bp);
227 if (bp->attr.disabled != 1)
228 continue;
229 bp->attr.bp_addr = breakinfo[breakno].addr;
230 bp->attr.bp_len = breakinfo[breakno].len;
231 bp->attr.bp_type = breakinfo[breakno].type;
232 info->address = breakinfo[breakno].addr;
233 info->len = breakinfo[breakno].len;
234 info->type = breakinfo[breakno].type;
235 val = arch_install_hw_breakpoint(bp);
236 if (!val)
237 bp->attr.disabled = 0;
239 if (!dbg_is_early)
240 hw_breakpoint_restore();
243 static int hw_break_reserve_slot(int breakno)
245 int cpu;
246 int cnt = 0;
247 struct perf_event **pevent;
249 if (dbg_is_early)
250 return 0;
252 for_each_online_cpu(cpu) {
253 cnt++;
254 pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
255 if (dbg_reserve_bp_slot(*pevent))
256 goto fail;
259 return 0;
261 fail:
262 for_each_online_cpu(cpu) {
263 cnt--;
264 if (!cnt)
265 break;
266 pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
267 dbg_release_bp_slot(*pevent);
269 return -1;
272 static int hw_break_release_slot(int breakno)
274 struct perf_event **pevent;
275 int cpu;
277 if (dbg_is_early)
278 return 0;
280 for_each_online_cpu(cpu) {
281 pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
282 if (dbg_release_bp_slot(*pevent))
284 * The debugger is responsible for handing the retry on
285 * remove failure.
287 return -1;
289 return 0;
292 static int
293 kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
295 int i;
297 for (i = 0; i < HBP_NUM; i++)
298 if (breakinfo[i].addr == addr && breakinfo[i].enabled)
299 break;
300 if (i == HBP_NUM)
301 return -1;
303 if (hw_break_release_slot(i)) {
304 printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr);
305 return -1;
307 breakinfo[i].enabled = 0;
309 return 0;
312 static void kgdb_remove_all_hw_break(void)
314 int i;
315 int cpu = raw_smp_processor_id();
316 struct perf_event *bp;
318 for (i = 0; i < HBP_NUM; i++) {
319 if (!breakinfo[i].enabled)
320 continue;
321 bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
322 if (!bp->attr.disabled) {
323 arch_uninstall_hw_breakpoint(bp);
324 bp->attr.disabled = 1;
325 continue;
327 if (dbg_is_early)
328 early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
329 breakinfo[i].type);
330 else if (hw_break_release_slot(i))
331 printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n",
332 breakinfo[i].addr);
333 breakinfo[i].enabled = 0;
337 static int
338 kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
340 int i;
342 for (i = 0; i < HBP_NUM; i++)
343 if (!breakinfo[i].enabled)
344 break;
345 if (i == HBP_NUM)
346 return -1;
348 switch (bptype) {
349 case BP_HARDWARE_BREAKPOINT:
350 len = 1;
351 breakinfo[i].type = X86_BREAKPOINT_EXECUTE;
352 break;
353 case BP_WRITE_WATCHPOINT:
354 breakinfo[i].type = X86_BREAKPOINT_WRITE;
355 break;
356 case BP_ACCESS_WATCHPOINT:
357 breakinfo[i].type = X86_BREAKPOINT_RW;
358 break;
359 default:
360 return -1;
362 switch (len) {
363 case 1:
364 breakinfo[i].len = X86_BREAKPOINT_LEN_1;
365 break;
366 case 2:
367 breakinfo[i].len = X86_BREAKPOINT_LEN_2;
368 break;
369 case 4:
370 breakinfo[i].len = X86_BREAKPOINT_LEN_4;
371 break;
372 #ifdef CONFIG_X86_64
373 case 8:
374 breakinfo[i].len = X86_BREAKPOINT_LEN_8;
375 break;
376 #endif
377 default:
378 return -1;
380 breakinfo[i].addr = addr;
381 if (hw_break_reserve_slot(i)) {
382 breakinfo[i].addr = 0;
383 return -1;
385 breakinfo[i].enabled = 1;
387 return 0;
391 * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
392 * @regs: Current &struct pt_regs.
394 * This function will be called if the particular architecture must
395 * disable hardware debugging while it is processing gdb packets or
396 * handling exception.
398 static void kgdb_disable_hw_debug(struct pt_regs *regs)
400 int i;
401 int cpu = raw_smp_processor_id();
402 struct perf_event *bp;
404 /* Disable hardware debugging while we are in kgdb: */
405 set_debugreg(0UL, 7);
406 for (i = 0; i < HBP_NUM; i++) {
407 if (!breakinfo[i].enabled)
408 continue;
409 if (dbg_is_early) {
410 early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
411 breakinfo[i].type);
412 continue;
414 bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
415 if (bp->attr.disabled == 1)
416 continue;
417 arch_uninstall_hw_breakpoint(bp);
418 bp->attr.disabled = 1;
422 #ifdef CONFIG_SMP
424 * kgdb_roundup_cpus - Get other CPUs into a holding pattern
425 * @flags: Current IRQ state
427 * On SMP systems, we need to get the attention of the other CPUs
428 * and get them be in a known state. This should do what is needed
429 * to get the other CPUs to call kgdb_wait(). Note that on some arches,
430 * the NMI approach is not used for rounding up all the CPUs. For example,
431 * in case of MIPS, smp_call_function() is used to roundup CPUs. In
432 * this case, we have to make sure that interrupts are enabled before
433 * calling smp_call_function(). The argument to this function is
434 * the flags that will be used when restoring the interrupts. There is
435 * local_irq_save() call before kgdb_roundup_cpus().
437 * On non-SMP systems, this is not called.
439 void kgdb_roundup_cpus(unsigned long flags)
441 apic->send_IPI_allbutself(APIC_DM_NMI);
443 #endif
446 * kgdb_arch_handle_exception - Handle architecture specific GDB packets.
447 * @e_vector: The error vector of the exception that happened.
448 * @signo: The signal number of the exception that happened.
449 * @err_code: The error code of the exception that happened.
450 * @remcomInBuffer: The buffer of the packet we have read.
451 * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into.
452 * @linux_regs: The &struct pt_regs of the current process.
454 * This function MUST handle the 'c' and 's' command packets,
455 * as well packets to set / remove a hardware breakpoint, if used.
456 * If there are additional packets which the hardware needs to handle,
457 * they are handled here. The code should return -1 if it wants to
458 * process more packets, and a %0 or %1 if it wants to exit from the
459 * kgdb callback.
461 int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
462 char *remcomInBuffer, char *remcomOutBuffer,
463 struct pt_regs *linux_regs)
465 unsigned long addr;
466 char *ptr;
468 switch (remcomInBuffer[0]) {
469 case 'c':
470 case 's':
471 /* try to read optional parameter, pc unchanged if no parm */
472 ptr = &remcomInBuffer[1];
473 if (kgdb_hex2long(&ptr, &addr))
474 linux_regs->ip = addr;
475 case 'D':
476 case 'k':
477 /* clear the trace bit */
478 linux_regs->flags &= ~X86_EFLAGS_TF;
479 atomic_set(&kgdb_cpu_doing_single_step, -1);
481 /* set the trace bit if we're stepping */
482 if (remcomInBuffer[0] == 's') {
483 linux_regs->flags |= X86_EFLAGS_TF;
484 atomic_set(&kgdb_cpu_doing_single_step,
485 raw_smp_processor_id());
488 return 0;
491 /* this means that we do not want to exit from the handler: */
492 return -1;
495 static inline int
496 single_step_cont(struct pt_regs *regs, struct die_args *args)
499 * Single step exception from kernel space to user space so
500 * eat the exception and continue the process:
502 printk(KERN_ERR "KGDB: trap/step from kernel to user space, "
503 "resuming...\n");
504 kgdb_arch_handle_exception(args->trapnr, args->signr,
505 args->err, "c", "", regs);
507 * Reset the BS bit in dr6 (pointed by args->err) to
508 * denote completion of processing
510 (*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
512 return NOTIFY_STOP;
515 static DECLARE_BITMAP(was_in_debug_nmi, NR_CPUS);
517 static int kgdb_nmi_handler(unsigned int cmd, struct pt_regs *regs)
519 int cpu;
521 switch (cmd) {
522 case NMI_LOCAL:
523 if (atomic_read(&kgdb_active) != -1) {
524 /* KGDB CPU roundup */
525 cpu = raw_smp_processor_id();
526 kgdb_nmicallback(cpu, regs);
527 set_bit(cpu, was_in_debug_nmi);
528 touch_nmi_watchdog();
530 return NMI_HANDLED;
532 break;
534 case NMI_UNKNOWN:
535 cpu = raw_smp_processor_id();
537 if (__test_and_clear_bit(cpu, was_in_debug_nmi))
538 return NMI_HANDLED;
540 break;
541 default:
542 /* do nothing */
543 break;
545 return NMI_DONE;
548 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
550 struct pt_regs *regs = args->regs;
552 switch (cmd) {
553 case DIE_DEBUG:
554 if (atomic_read(&kgdb_cpu_doing_single_step) != -1) {
555 if (user_mode(regs))
556 return single_step_cont(regs, args);
557 break;
558 } else if (test_thread_flag(TIF_SINGLESTEP))
559 /* This means a user thread is single stepping
560 * a system call which should be ignored
562 return NOTIFY_DONE;
563 /* fall through */
564 default:
565 if (user_mode(regs))
566 return NOTIFY_DONE;
569 if (kgdb_handle_exception(args->trapnr, args->signr, cmd, regs))
570 return NOTIFY_DONE;
572 /* Must touch watchdog before return to normal operation */
573 touch_nmi_watchdog();
574 return NOTIFY_STOP;
577 int kgdb_ll_trap(int cmd, const char *str,
578 struct pt_regs *regs, long err, int trap, int sig)
580 struct die_args args = {
581 .regs = regs,
582 .str = str,
583 .err = err,
584 .trapnr = trap,
585 .signr = sig,
589 if (!kgdb_io_module_registered)
590 return NOTIFY_DONE;
592 return __kgdb_notify(&args, cmd);
595 static int
596 kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
598 unsigned long flags;
599 int ret;
601 local_irq_save(flags);
602 ret = __kgdb_notify(ptr, cmd);
603 local_irq_restore(flags);
605 return ret;
608 static struct notifier_block kgdb_notifier = {
609 .notifier_call = kgdb_notify,
613 * kgdb_arch_init - Perform any architecture specific initialization.
615 * This function will handle the initialization of any architecture
616 * specific callbacks.
618 int kgdb_arch_init(void)
620 int retval;
622 retval = register_die_notifier(&kgdb_notifier);
623 if (retval)
624 goto out;
626 retval = register_nmi_handler(NMI_LOCAL, kgdb_nmi_handler,
627 0, "kgdb");
628 if (retval)
629 goto out1;
631 retval = register_nmi_handler(NMI_UNKNOWN, kgdb_nmi_handler,
632 0, "kgdb");
634 if (retval)
635 goto out2;
637 return retval;
639 out2:
640 unregister_nmi_handler(NMI_LOCAL, "kgdb");
641 out1:
642 unregister_die_notifier(&kgdb_notifier);
643 out:
644 return retval;
647 static void kgdb_hw_overflow_handler(struct perf_event *event,
648 struct perf_sample_data *data, struct pt_regs *regs)
650 struct task_struct *tsk = current;
651 int i;
653 for (i = 0; i < 4; i++)
654 if (breakinfo[i].enabled)
655 tsk->thread.debugreg6 |= (DR_TRAP0 << i);
658 void kgdb_arch_late(void)
660 int i, cpu;
661 struct perf_event_attr attr;
662 struct perf_event **pevent;
665 * Pre-allocate the hw breakpoint structions in the non-atomic
666 * portion of kgdb because this operation requires mutexs to
667 * complete.
669 hw_breakpoint_init(&attr);
670 attr.bp_addr = (unsigned long)kgdb_arch_init;
671 attr.bp_len = HW_BREAKPOINT_LEN_1;
672 attr.bp_type = HW_BREAKPOINT_W;
673 attr.disabled = 1;
674 for (i = 0; i < HBP_NUM; i++) {
675 if (breakinfo[i].pev)
676 continue;
677 breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL, NULL);
678 if (IS_ERR((void * __force)breakinfo[i].pev)) {
679 printk(KERN_ERR "kgdb: Could not allocate hw"
680 "breakpoints\nDisabling the kernel debugger\n");
681 breakinfo[i].pev = NULL;
682 kgdb_arch_exit();
683 return;
685 for_each_online_cpu(cpu) {
686 pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
687 pevent[0]->hw.sample_period = 1;
688 pevent[0]->overflow_handler = kgdb_hw_overflow_handler;
689 if (pevent[0]->destroy != NULL) {
690 pevent[0]->destroy = NULL;
691 release_bp_slot(*pevent);
698 * kgdb_arch_exit - Perform any architecture specific uninitalization.
700 * This function will handle the uninitalization of any architecture
701 * specific callbacks, for dynamic registration and unregistration.
703 void kgdb_arch_exit(void)
705 int i;
706 for (i = 0; i < 4; i++) {
707 if (breakinfo[i].pev) {
708 unregister_wide_hw_breakpoint(breakinfo[i].pev);
709 breakinfo[i].pev = NULL;
712 unregister_nmi_handler(NMI_UNKNOWN, "kgdb");
713 unregister_nmi_handler(NMI_LOCAL, "kgdb");
714 unregister_die_notifier(&kgdb_notifier);
719 * kgdb_skipexception - Bail out of KGDB when we've been triggered.
720 * @exception: Exception vector number
721 * @regs: Current &struct pt_regs.
723 * On some architectures we need to skip a breakpoint exception when
724 * it occurs after a breakpoint has been removed.
726 * Skip an int3 exception when it occurs after a breakpoint has been
727 * removed. Backtrack eip by 1 since the int3 would have caused it to
728 * increment by 1.
730 int kgdb_skipexception(int exception, struct pt_regs *regs)
732 if (exception == 3 && kgdb_isremovedbreak(regs->ip - 1)) {
733 regs->ip -= 1;
734 return 1;
736 return 0;
739 unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
741 if (exception == 3)
742 return instruction_pointer(regs) - 1;
743 return instruction_pointer(regs);
746 void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
748 regs->ip = ip;
751 int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
753 int err;
754 char opc[BREAK_INSTR_SIZE];
756 bpt->type = BP_BREAKPOINT;
757 err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
758 BREAK_INSTR_SIZE);
759 if (err)
760 return err;
761 err = probe_kernel_write((char *)bpt->bpt_addr,
762 arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
763 if (!err)
764 return err;
766 * It is safe to call text_poke() because normal kernel execution
767 * is stopped on all cores, so long as the text_mutex is not locked.
769 if (mutex_is_locked(&text_mutex))
770 return -EBUSY;
771 text_poke((void *)bpt->bpt_addr, arch_kgdb_ops.gdb_bpt_instr,
772 BREAK_INSTR_SIZE);
773 err = probe_kernel_read(opc, (char *)bpt->bpt_addr, BREAK_INSTR_SIZE);
774 if (err)
775 return err;
776 if (memcmp(opc, arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE))
777 return -EINVAL;
778 bpt->type = BP_POKE_BREAKPOINT;
780 return err;
783 int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
785 int err;
786 char opc[BREAK_INSTR_SIZE];
788 if (bpt->type != BP_POKE_BREAKPOINT)
789 goto knl_write;
791 * It is safe to call text_poke() because normal kernel execution
792 * is stopped on all cores, so long as the text_mutex is not locked.
794 if (mutex_is_locked(&text_mutex))
795 goto knl_write;
796 text_poke((void *)bpt->bpt_addr, bpt->saved_instr, BREAK_INSTR_SIZE);
797 err = probe_kernel_read(opc, (char *)bpt->bpt_addr, BREAK_INSTR_SIZE);
798 if (err || memcmp(opc, bpt->saved_instr, BREAK_INSTR_SIZE))
799 goto knl_write;
800 return err;
802 knl_write:
803 return probe_kernel_write((char *)bpt->bpt_addr,
804 (char *)bpt->saved_instr, BREAK_INSTR_SIZE);
807 struct kgdb_arch arch_kgdb_ops = {
808 /* Breakpoint instruction: */
809 .gdb_bpt_instr = { 0xcc },
810 .flags = KGDB_HW_BREAKPOINT,
811 .set_hw_breakpoint = kgdb_set_hw_break,
812 .remove_hw_breakpoint = kgdb_remove_hw_break,
813 .disable_hw_break = kgdb_disable_hw_debug,
814 .remove_all_hw_break = kgdb_remove_all_hw_break,
815 .correct_hw_break = kgdb_correct_hw_break,