?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
drm/nv17-50: restore fence buffer on resume
[linux/fpc-iii.git] / drivers / pcmcia / soc_common.c
bloba2bc6ee1702e14f2c722b510c304863c7b9d0060
1 /*======================================================================
2
3 Common support code for the PCMCIA control functionality of
4 integrated SOCs like the SA-11x0 and PXA2xx microprocessors.
5
6 The contents of this file are subject to the Mozilla Public
7 License Version 1.1 (the "License"); you may not use this file
8 except in compliance with the License. You may obtain a copy of
9 the License at http://www.mozilla.org/MPL/
10
11 Software distributed under the License is distributed on an "AS
12 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
13 implied. See the License for the specific language governing
14 rights and limitations under the License.
15
16 The initial developer of the original code is John G. Dorsey
17 <john+@cs.cmu.edu>. Portions created by John G. Dorsey are
18 Copyright (C) 1999 John G. Dorsey. All Rights Reserved.
19
20 Alternatively, the contents of this file may be used under the
21 terms of the GNU Public License version 2 (the "GPL"), in which
22 case the provisions of the GPL are applicable instead of the
23 above. If you wish to allow the use of your version of this file
24 only under the terms of the GPL and not to allow others to use
25 your version of this file under the MPL, indicate your decision
26 by deleting the provisions above and replace them with the notice
27 and other provisions required by the GPL. If you do not delete
28 the provisions above, a recipient may use your version of this
29 file under either the MPL or the GPL.
30
31 ======================================================================*/
32
33
34 #include <linux/cpufreq.h>
35 #include <linux/gpio.h>
36 #include <linux/init.h>
37 #include <linux/interrupt.h>
38 #include <linux/io.h>
39 #include <linux/irq.h>
40 #include <linux/kernel.h>
41 #include <linux/mm.h>
42 #include <linux/module.h>
43 #include <linux/moduleparam.h>
44 #include <linux/mutex.h>
45 #include <linux/spinlock.h>
46 #include <linux/timer.h>
47
48 #include <mach/hardware.h>
49
50 #include "soc_common.h"
51
52 static irqreturn_t soc_common_pcmcia_interrupt(int irq, void *dev);
53
54 #ifdef CONFIG_PCMCIA_DEBUG
55
56 static int pc_debug;
57 module_param(pc_debug, int, 0644);
58
59 void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
60 int lvl, const char *fmt, ...)
61 {
62 struct va_format vaf;
63 va_list args;
64 if (pc_debug > lvl) {
65 va_start(args, fmt);
66
67 vaf.fmt = fmt;
68 vaf.va = &args;
69
70 printk(KERN_DEBUG "skt%u: %s: %pV", skt->nr, func, &vaf);
71
72 va_end(args);
73 }
74 }
75 EXPORT_SYMBOL(soc_pcmcia_debug);
76
77 #endif
78
79 #define to_soc_pcmcia_socket(x) \
80 container_of(x, struct soc_pcmcia_socket, socket)
81
82 static unsigned short
83 calc_speed(unsigned short *spds, int num, unsigned short dflt)
84 {
85 unsigned short speed = 0;
86 int i;
87
88 for (i = 0; i < num; i++)
89 if (speed < spds[i])
90 speed = spds[i];
91 if (speed == 0)
92 speed = dflt;
93
94 return speed;
95 }
96
97 void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt,
98 struct soc_pcmcia_timing *timing)
99 {
100 timing->io =
101 calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS);
102 timing->mem =
103 calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
104 timing->attr =
105 calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
106 }
107 EXPORT_SYMBOL(soc_common_pcmcia_get_timing);
108
109 static void __soc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt,
110 unsigned int nr)
111 {
112 unsigned int i;
113
114 for (i = 0; i < nr; i++) {
115 if (skt->stat[i].irq)
116 free_irq(skt->stat[i].irq, skt);
117 if (gpio_is_valid(skt->stat[i].gpio))
118 gpio_free(skt->stat[i].gpio);
119 }
120
121 if (skt->ops->hw_shutdown)
122 skt->ops->hw_shutdown(skt);
123 }
124
125 static void soc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
126 {
127 __soc_pcmcia_hw_shutdown(skt, ARRAY_SIZE(skt->stat));
128 }
129
130 static int soc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
131 {
132 int ret = 0, i;
133
134 if (skt->ops->hw_init) {
135 ret = skt->ops->hw_init(skt);
136 if (ret)
137 return ret;
138 }
139
140 for (i = 0; i < ARRAY_SIZE(skt->stat); i++) {
141 if (gpio_is_valid(skt->stat[i].gpio)) {
142 int irq;
143
144 ret = gpio_request_one(skt->stat[i].gpio, GPIOF_IN,
145 skt->stat[i].name);
146 if (ret) {
147 __soc_pcmcia_hw_shutdown(skt, i);
148 return ret;
149 }
150
151 irq = gpio_to_irq(skt->stat[i].gpio);
152
153 if (i == SOC_STAT_RDY)
154 skt->socket.pci_irq = irq;
155 else
156 skt->stat[i].irq = irq;
157 }
158
159 if (skt->stat[i].irq) {
160 ret = request_irq(skt->stat[i].irq,
161 soc_common_pcmcia_interrupt,
162 IRQF_TRIGGER_NONE,
163 skt->stat[i].name, skt);
164 if (ret) {
165 if (gpio_is_valid(skt->stat[i].gpio))
166 gpio_free(skt->stat[i].gpio);
167 __soc_pcmcia_hw_shutdown(skt, i);
168 return ret;
169 }
170 }
171 }
172
173 return ret;
174 }
175
176 static void soc_pcmcia_hw_enable(struct soc_pcmcia_socket *skt)
177 {
178 int i;
179
180 for (i = 0; i < ARRAY_SIZE(skt->stat); i++)
181 if (skt->stat[i].irq) {
182 irq_set_irq_type(skt->stat[i].irq, IRQ_TYPE_EDGE_RISING);
183 irq_set_irq_type(skt->stat[i].irq, IRQ_TYPE_EDGE_BOTH);
184 }
185 }
186
187 static void soc_pcmcia_hw_disable(struct soc_pcmcia_socket *skt)
188 {
189 int i;
190
191 for (i = 0; i < ARRAY_SIZE(skt->stat); i++)
192 if (skt->stat[i].irq)
193 irq_set_irq_type(skt->stat[i].irq, IRQ_TYPE_NONE);
194 }
195
196 static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt)
197 {
198 struct pcmcia_state state;
199 unsigned int stat;
200
201 memset(&state, 0, sizeof(struct pcmcia_state));
202
203 /* Make battery voltage state report 'good' */
204 state.bvd1 = 1;
205 state.bvd2 = 1;
206
207 /* CD is active low by default */
208 if (gpio_is_valid(skt->stat[SOC_STAT_CD].gpio))
209 state.detect = !gpio_get_value(skt->stat[SOC_STAT_CD].gpio);
210
211 /* RDY and BVD are active high by default */
212 if (gpio_is_valid(skt->stat[SOC_STAT_RDY].gpio))
213 state.ready = !!gpio_get_value(skt->stat[SOC_STAT_RDY].gpio);
214 if (gpio_is_valid(skt->stat[SOC_STAT_BVD1].gpio))
215 state.bvd1 = !!gpio_get_value(skt->stat[SOC_STAT_BVD1].gpio);
216 if (gpio_is_valid(skt->stat[SOC_STAT_BVD2].gpio))
217 state.bvd2 = !!gpio_get_value(skt->stat[SOC_STAT_BVD2].gpio);
218
219 skt->ops->socket_state(skt, &state);
220
221 stat = state.detect ? SS_DETECT : 0;
222 stat |= state.ready ? SS_READY : 0;
223 stat |= state.wrprot ? SS_WRPROT : 0;
224 stat |= state.vs_3v ? SS_3VCARD : 0;
225 stat |= state.vs_Xv ? SS_XVCARD : 0;
226
227 /* The power status of individual sockets is not available
228 * explicitly from the hardware, so we just remember the state
229 * and regurgitate it upon request:
230 */
231 stat |= skt->cs_state.Vcc ? SS_POWERON : 0;
232
233 if (skt->cs_state.flags & SS_IOCARD)
234 stat |= state.bvd1 ? SS_STSCHG : 0;
235 else {
236 if (state.bvd1 == 0)
237 stat |= SS_BATDEAD;
238 else if (state.bvd2 == 0)
239 stat |= SS_BATWARN;
240 }
241 return stat;
242 }
243
244 /*
245 * soc_common_pcmcia_config_skt
246 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
247 *
248 * Convert PCMCIA socket state to our socket configure structure.
249 */
250 static int soc_common_pcmcia_config_skt(
251 struct soc_pcmcia_socket *skt, socket_state_t *state)
252 {
253 int ret;
254
255 ret = skt->ops->configure_socket(skt, state);
256 if (ret == 0) {
257 /*
258 * This really needs a better solution. The IRQ
259 * may or may not be claimed by the driver.
260 */
261 if (skt->irq_state != 1 && state->io_irq) {
262 skt->irq_state = 1;
263 irq_set_irq_type(skt->socket.pci_irq,
264 IRQ_TYPE_EDGE_FALLING);
265 } else if (skt->irq_state == 1 && state->io_irq == 0) {
266 skt->irq_state = 0;
267 irq_set_irq_type(skt->socket.pci_irq, IRQ_TYPE_NONE);
268 }
269
270 skt->cs_state = *state;
271 }
272
273 if (ret < 0)
274 printk(KERN_ERR "soc_common_pcmcia: unable to configure "
275 "socket %d\n", skt->nr);
276
277 return ret;
278 }
279
280 /* soc_common_pcmcia_sock_init()
281 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
282 *
283 * (Re-)Initialise the socket, turning on status interrupts
284 * and PCMCIA bus. This must wait for power to stabilise
285 * so that the card status signals report correctly.
286 *
287 * Returns: 0
288 */
289 static int soc_common_pcmcia_sock_init(struct pcmcia_socket *sock)
290 {
291 struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
292
293 debug(skt, 2, "initializing socket\n");
294 if (skt->ops->socket_init)
295 skt->ops->socket_init(skt);
296 soc_pcmcia_hw_enable(skt);
297 return 0;
298 }
299
300
301 /*
302 * soc_common_pcmcia_suspend()
303 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
304 *
305 * Remove power on the socket, disable IRQs from the card.
306 * Turn off status interrupts, and disable the PCMCIA bus.
307 *
308 * Returns: 0
309 */
310 static int soc_common_pcmcia_suspend(struct pcmcia_socket *sock)
311 {
312 struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
313
314 debug(skt, 2, "suspending socket\n");
315
316 soc_pcmcia_hw_disable(skt);
317 if (skt->ops->socket_suspend)
318 skt->ops->socket_suspend(skt);
319
320 return 0;
321 }
322
323 static DEFINE_SPINLOCK(status_lock);
324
325 static void soc_common_check_status(struct soc_pcmcia_socket *skt)
326 {
327 unsigned int events;
328
329 debug(skt, 4, "entering PCMCIA monitoring thread\n");
330
331 do {
332 unsigned int status;
333 unsigned long flags;
334
335 status = soc_common_pcmcia_skt_state(skt);
336
337 spin_lock_irqsave(&status_lock, flags);
338 events = (status ^ skt->status) & skt->cs_state.csc_mask;
339 skt->status = status;
340 spin_unlock_irqrestore(&status_lock, flags);
341
342 debug(skt, 4, "events: %s%s%s%s%s%s\n",
343 events == 0 ? "<NONE>" : "",
344 events & SS_DETECT ? "DETECT " : "",
345 events & SS_READY ? "READY " : "",
346 events & SS_BATDEAD ? "BATDEAD " : "",
347 events & SS_BATWARN ? "BATWARN " : "",
348 events & SS_STSCHG ? "STSCHG " : "");
349
350 if (events)
351 pcmcia_parse_events(&skt->socket, events);
352 } while (events);
353 }
354
355 /* Let's poll for events in addition to IRQs since IRQ only is unreliable... */
356 static void soc_common_pcmcia_poll_event(unsigned long dummy)
357 {
358 struct soc_pcmcia_socket *skt = (struct soc_pcmcia_socket *)dummy;
359 debug(skt, 4, "polling for events\n");
360
361 mod_timer(&skt->poll_timer, jiffies + SOC_PCMCIA_POLL_PERIOD);
362
363 soc_common_check_status(skt);
364 }
365
366
367 /*
368 * Service routine for socket driver interrupts (requested by the
369 * low-level PCMCIA init() operation via soc_common_pcmcia_thread()).
370 * The actual interrupt-servicing work is performed by
371 * soc_common_pcmcia_thread(), largely because the Card Services event-
372 * handling code performs scheduling operations which cannot be
373 * executed from within an interrupt context.
374 */
375 static irqreturn_t soc_common_pcmcia_interrupt(int irq, void *dev)
376 {
377 struct soc_pcmcia_socket *skt = dev;
378
379 debug(skt, 3, "servicing IRQ %d\n", irq);
380
381 soc_common_check_status(skt);
382
383 return IRQ_HANDLED;
384 }
385
386
387 /*
388 * Implements the get_status() operation for the in-kernel PCMCIA
389 * service (formerly SS_GetStatus in Card Services). Essentially just
390 * fills in bits in `status' according to internal driver state or
391 * the value of the voltage detect chipselect register.
392 *
393 * As a debugging note, during card startup, the PCMCIA core issues
394 * three set_socket() commands in a row the first with RESET deasserted,
395 * the second with RESET asserted, and the last with RESET deasserted
396 * again. Following the third set_socket(), a get_status() command will
397 * be issued. The kernel is looking for the SS_READY flag (see
398 * setup_socket(), reset_socket(), and unreset_socket() in cs.c).
399 *
400 * Returns: 0
401 */
402 static int
403 soc_common_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status)
404 {
405 struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
406
407 skt->status = soc_common_pcmcia_skt_state(skt);
408 *status = skt->status;
409
410 return 0;
411 }
412
413
414 /*
415 * Implements the set_socket() operation for the in-kernel PCMCIA
416 * service (formerly SS_SetSocket in Card Services). We more or
417 * less punt all of this work and let the kernel handle the details
418 * of power configuration, reset, &c. We also record the value of
419 * `state' in order to regurgitate it to the PCMCIA core later.
420 */
421 static int soc_common_pcmcia_set_socket(
422 struct pcmcia_socket *sock, socket_state_t *state)
423 {
424 struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
425
426 debug(skt, 2, "mask: %s%s%s%s%s%s flags: %s%s%s%s%s%s Vcc %d Vpp %d irq %d\n",
427 (state->csc_mask == 0) ? "<NONE> " : "",
428 (state->csc_mask & SS_DETECT) ? "DETECT " : "",
429 (state->csc_mask & SS_READY) ? "READY " : "",
430 (state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "",
431 (state->csc_mask & SS_BATWARN) ? "BATWARN " : "",
432 (state->csc_mask & SS_STSCHG) ? "STSCHG " : "",
433 (state->flags == 0) ? "<NONE> " : "",
434 (state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "",
435 (state->flags & SS_IOCARD) ? "IOCARD " : "",
436 (state->flags & SS_RESET) ? "RESET " : "",
437 (state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "",
438 (state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "",
439 state->Vcc, state->Vpp, state->io_irq);
440
441 return soc_common_pcmcia_config_skt(skt, state);
442 }
443
444
445 /*
446 * Implements the set_io_map() operation for the in-kernel PCMCIA
447 * service (formerly SS_SetIOMap in Card Services). We configure
448 * the map speed as requested, but override the address ranges
449 * supplied by Card Services.
450 *
451 * Returns: 0 on success, -1 on error
452 */
453 static int soc_common_pcmcia_set_io_map(
454 struct pcmcia_socket *sock, struct pccard_io_map *map)
455 {
456 struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
457 unsigned short speed = map->speed;
458
459 debug(skt, 2, "map %u speed %u start 0x%08llx stop 0x%08llx\n",
460 map->map, map->speed, (unsigned long long)map->start,
461 (unsigned long long)map->stop);
462 debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
463 (map->flags == 0) ? "<NONE>" : "",
464 (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
465 (map->flags & MAP_16BIT) ? "16BIT " : "",
466 (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
467 (map->flags & MAP_0WS) ? "0WS " : "",
468 (map->flags & MAP_WRPROT) ? "WRPROT " : "",
469 (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
470 (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
471
472 if (map->map >= MAX_IO_WIN) {
473 printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
474 map->map);
475 return -1;
476 }
477
478 if (map->flags & MAP_ACTIVE) {
479 if (speed == 0)
480 speed = SOC_PCMCIA_IO_ACCESS;
481 } else {
482 speed = 0;
483 }
484
485 skt->spd_io[map->map] = speed;
486 skt->ops->set_timing(skt);
487
488 if (map->stop == 1)
489 map->stop = PAGE_SIZE-1;
490
491 map->stop -= map->start;
492 map->stop += skt->socket.io_offset;
493 map->start = skt->socket.io_offset;
494
495 return 0;
496 }
497
498
499 /*
500 * Implements the set_mem_map() operation for the in-kernel PCMCIA
501 * service (formerly SS_SetMemMap in Card Services). We configure
502 * the map speed as requested, but override the address ranges
503 * supplied by Card Services.
504 *
505 * Returns: 0 on success, -ERRNO on error
506 */
507 static int soc_common_pcmcia_set_mem_map(
508 struct pcmcia_socket *sock, struct pccard_mem_map *map)
509 {
510 struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
511 struct resource *res;
512 unsigned short speed = map->speed;
513
514 debug(skt, 2, "map %u speed %u card_start %08x\n",
515 map->map, map->speed, map->card_start);
516 debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
517 (map->flags == 0) ? "<NONE>" : "",
518 (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
519 (map->flags & MAP_16BIT) ? "16BIT " : "",
520 (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
521 (map->flags & MAP_0WS) ? "0WS " : "",
522 (map->flags & MAP_WRPROT) ? "WRPROT " : "",
523 (map->flags & MAP_ATTRIB) ? "ATTRIB " : "",
524 (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "");
525
526 if (map->map >= MAX_WIN)
527 return -EINVAL;
528
529 if (map->flags & MAP_ACTIVE) {
530 if (speed == 0)
531 speed = 300;
532 } else {
533 speed = 0;
534 }
535
536 if (map->flags & MAP_ATTRIB) {
537 res = &skt->res_attr;
538 skt->spd_attr[map->map] = speed;
539 skt->spd_mem[map->map] = 0;
540 } else {
541 res = &skt->res_mem;
542 skt->spd_attr[map->map] = 0;
543 skt->spd_mem[map->map] = speed;
544 }
545
546 skt->ops->set_timing(skt);
547
548 map->static_start = res->start + map->card_start;
549
550 return 0;
551 }
552
553 struct bittbl {
554 unsigned int mask;
555 const char *name;
556 };
557
558 static struct bittbl status_bits[] = {
559 { SS_WRPROT, "SS_WRPROT" },
560 { SS_BATDEAD, "SS_BATDEAD" },
561 { SS_BATWARN, "SS_BATWARN" },
562 { SS_READY, "SS_READY" },
563 { SS_DETECT, "SS_DETECT" },
564 { SS_POWERON, "SS_POWERON" },
565 { SS_STSCHG, "SS_STSCHG" },
566 { SS_3VCARD, "SS_3VCARD" },
567 { SS_XVCARD, "SS_XVCARD" },
568 };
569
570 static struct bittbl conf_bits[] = {
571 { SS_PWR_AUTO, "SS_PWR_AUTO" },
572 { SS_IOCARD, "SS_IOCARD" },
573 { SS_RESET, "SS_RESET" },
574 { SS_DMA_MODE, "SS_DMA_MODE" },
575 { SS_SPKR_ENA, "SS_SPKR_ENA" },
576 { SS_OUTPUT_ENA, "SS_OUTPUT_ENA" },
577 };
578
579 static void dump_bits(char **p, const char *prefix,
580 unsigned int val, struct bittbl *bits, int sz)
581 {
582 char *b = *p;
583 int i;
584
585 b += sprintf(b, "%-9s:", prefix);
586 for (i = 0; i < sz; i++)
587 if (val & bits[i].mask)
588 b += sprintf(b, " %s", bits[i].name);
589 *b++ = '\n';
590 *p = b;
591 }
592
593 /*
594 * Implements the /sys/class/pcmcia_socket/??/status file.
595 *
596 * Returns: the number of characters added to the buffer
597 */
598 static ssize_t show_status(
599 struct device *dev, struct device_attribute *attr, char *buf)
600 {
601 struct soc_pcmcia_socket *skt =
602 container_of(dev, struct soc_pcmcia_socket, socket.dev);
603 char *p = buf;
604
605 p += sprintf(p, "slot : %d\n", skt->nr);
606
607 dump_bits(&p, "status", skt->status,
608 status_bits, ARRAY_SIZE(status_bits));
609 dump_bits(&p, "csc_mask", skt->cs_state.csc_mask,
610 status_bits, ARRAY_SIZE(status_bits));
611 dump_bits(&p, "cs_flags", skt->cs_state.flags,
612 conf_bits, ARRAY_SIZE(conf_bits));
613
614 p += sprintf(p, "Vcc : %d\n", skt->cs_state.Vcc);
615 p += sprintf(p, "Vpp : %d\n", skt->cs_state.Vpp);
616 p += sprintf(p, "IRQ : %d (%d)\n", skt->cs_state.io_irq,
617 skt->socket.pci_irq);
618 if (skt->ops->show_timing)
619 p += skt->ops->show_timing(skt, p);
620
621 return p-buf;
622 }
623 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
624
625
626 static struct pccard_operations soc_common_pcmcia_operations = {
627 .init = soc_common_pcmcia_sock_init,
628 .suspend = soc_common_pcmcia_suspend,
629 .get_status = soc_common_pcmcia_get_status,
630 .set_socket = soc_common_pcmcia_set_socket,
631 .set_io_map = soc_common_pcmcia_set_io_map,
632 .set_mem_map = soc_common_pcmcia_set_mem_map,
633 };
634
635
636 static LIST_HEAD(soc_pcmcia_sockets);
637 static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
638
639 #ifdef CONFIG_CPU_FREQ
640 static int
641 soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
642 {
643 struct soc_pcmcia_socket *skt;
644 struct cpufreq_freqs *freqs = data;
645 int ret = 0;
646
647 mutex_lock(&soc_pcmcia_sockets_lock);
648 list_for_each_entry(skt, &soc_pcmcia_sockets, node)
649 if (skt->ops->frequency_change)
650 ret += skt->ops->frequency_change(skt, val, freqs);
651 mutex_unlock(&soc_pcmcia_sockets_lock);
652
653 return ret;
654 }
655
656 static struct notifier_block soc_pcmcia_notifier_block = {
657 .notifier_call = soc_pcmcia_notifier
658 };
659
660 static int soc_pcmcia_cpufreq_register(void)
661 {
662 int ret;
663
664 ret = cpufreq_register_notifier(&soc_pcmcia_notifier_block,
665 CPUFREQ_TRANSITION_NOTIFIER);
666 if (ret < 0)
667 printk(KERN_ERR "Unable to register CPU frequency change "
668 "notifier for PCMCIA (%d)\n", ret);
669 return ret;
670 }
671 fs_initcall(soc_pcmcia_cpufreq_register);
672
673 static void soc_pcmcia_cpufreq_unregister(void)
674 {
675 cpufreq_unregister_notifier(&soc_pcmcia_notifier_block,
676 CPUFREQ_TRANSITION_NOTIFIER);
677 }
678 module_exit(soc_pcmcia_cpufreq_unregister);
679
680 #endif
681
682 void soc_pcmcia_init_one(struct soc_pcmcia_socket *skt,
683 struct pcmcia_low_level *ops, struct device *dev)
684 {
685 int i;
686
687 skt->ops = ops;
688 skt->socket.owner = ops->owner;
689 skt->socket.dev.parent = dev;
690 skt->socket.pci_irq = NO_IRQ;
691
692 for (i = 0; i < ARRAY_SIZE(skt->stat); i++)
693 skt->stat[i].gpio = -EINVAL;
694 }
695 EXPORT_SYMBOL(soc_pcmcia_init_one);
696
697 void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt)
698 {
699 mutex_lock(&soc_pcmcia_sockets_lock);
700 del_timer_sync(&skt->poll_timer);
701
702 pcmcia_unregister_socket(&skt->socket);
703
704 soc_pcmcia_hw_shutdown(skt);
705
706 /* should not be required; violates some lowlevel drivers */
707 soc_common_pcmcia_config_skt(skt, &dead_socket);
708
709 list_del(&skt->node);
710 mutex_unlock(&soc_pcmcia_sockets_lock);
711
712 iounmap(skt->virt_io);
713 skt->virt_io = NULL;
714 release_resource(&skt->res_attr);
715 release_resource(&skt->res_mem);
716 release_resource(&skt->res_io);
717 release_resource(&skt->res_skt);
718 }
719 EXPORT_SYMBOL(soc_pcmcia_remove_one);
720
721 int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
722 {
723 int ret;
724
725 init_timer(&skt->poll_timer);
726 skt->poll_timer.function = soc_common_pcmcia_poll_event;
727 skt->poll_timer.data = (unsigned long)skt;
728 skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD;
729
730 ret = request_resource(&iomem_resource, &skt->res_skt);
731 if (ret)
732 goto out_err_1;
733
734 ret = request_resource(&skt->res_skt, &skt->res_io);
735 if (ret)
736 goto out_err_2;
737
738 ret = request_resource(&skt->res_skt, &skt->res_mem);
739 if (ret)
740 goto out_err_3;
741
742 ret = request_resource(&skt->res_skt, &skt->res_attr);
743 if (ret)
744 goto out_err_4;
745
746 skt->virt_io = ioremap(skt->res_io.start, 0x10000);
747 if (skt->virt_io == NULL) {
748 ret = -ENOMEM;
749 goto out_err_5;
750 }
751
752 mutex_lock(&soc_pcmcia_sockets_lock);
753
754 list_add(&skt->node, &soc_pcmcia_sockets);
755
756 /*
757 * We initialize default socket timing here, because
758 * we are not guaranteed to see a SetIOMap operation at
759 * runtime.
760 */
761 skt->ops->set_timing(skt);
762
763 ret = soc_pcmcia_hw_init(skt);
764 if (ret)
765 goto out_err_6;
766
767 skt->socket.ops = &soc_common_pcmcia_operations;
768 skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD;
769 skt->socket.resource_ops = &pccard_static_ops;
770 skt->socket.irq_mask = 0;
771 skt->socket.map_size = PAGE_SIZE;
772 skt->socket.io_offset = (unsigned long)skt->virt_io;
773
774 skt->status = soc_common_pcmcia_skt_state(skt);
775
776 ret = pcmcia_register_socket(&skt->socket);
777 if (ret)
778 goto out_err_7;
779
780 add_timer(&skt->poll_timer);
781
782 mutex_unlock(&soc_pcmcia_sockets_lock);
783
784 ret = device_create_file(&skt->socket.dev, &dev_attr_status);
785 if (ret)
786 goto out_err_8;
787
788 return ret;
789
790 out_err_8:
791 mutex_lock(&soc_pcmcia_sockets_lock);
792 del_timer_sync(&skt->poll_timer);
793 pcmcia_unregister_socket(&skt->socket);
794
795 out_err_7:
796 soc_pcmcia_hw_shutdown(skt);
797 out_err_6:
798 list_del(&skt->node);
799 mutex_unlock(&soc_pcmcia_sockets_lock);
800 iounmap(skt->virt_io);
801 out_err_5:
802 release_resource(&skt->res_attr);
803 out_err_4:
804 release_resource(&skt->res_mem);
805 out_err_3:
806 release_resource(&skt->res_io);
807 out_err_2:
808 release_resource(&skt->res_skt);
809 out_err_1:
810
811 return ret;
812 }
813 EXPORT_SYMBOL(soc_pcmcia_add_one);
814
815 MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
816 MODULE_DESCRIPTION("Linux PCMCIA Card Services: Common SoC support");
817 MODULE_LICENSE("Dual MPL/GPL");
Linux with added FPC-III support