xfs: XFS_IS_REALTIME_INODE() should be false if no rt device present
[linux/fpc-iii.git] / drivers / pinctrl / pinctrl-st.c
blobb58d3f29148a402120a2993cc57a2d0eee1df563
1 /*
2 * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
3 * Authors:
4 * Srinivas Kandagatla <srinivas.kandagatla@st.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/slab.h>
14 #include <linux/err.h>
15 #include <linux/io.h>
16 #include <linux/of.h>
17 #include <linux/of_irq.h>
18 #include <linux/of_gpio.h>
19 #include <linux/of_address.h>
20 #include <linux/regmap.h>
21 #include <linux/mfd/syscon.h>
22 #include <linux/pinctrl/pinctrl.h>
23 #include <linux/pinctrl/pinmux.h>
24 #include <linux/pinctrl/pinconf.h>
25 #include <linux/platform_device.h>
26 #include "core.h"
28 /* PIO Block registers */
29 /* PIO output */
30 #define REG_PIO_POUT 0x00
31 /* Set bits of POUT */
32 #define REG_PIO_SET_POUT 0x04
33 /* Clear bits of POUT */
34 #define REG_PIO_CLR_POUT 0x08
35 /* PIO input */
36 #define REG_PIO_PIN 0x10
37 /* PIO configuration */
38 #define REG_PIO_PC(n) (0x20 + (n) * 0x10)
39 /* Set bits of PC[2:0] */
40 #define REG_PIO_SET_PC(n) (0x24 + (n) * 0x10)
41 /* Clear bits of PC[2:0] */
42 #define REG_PIO_CLR_PC(n) (0x28 + (n) * 0x10)
43 /* PIO input comparison */
44 #define REG_PIO_PCOMP 0x50
45 /* Set bits of PCOMP */
46 #define REG_PIO_SET_PCOMP 0x54
47 /* Clear bits of PCOMP */
48 #define REG_PIO_CLR_PCOMP 0x58
49 /* PIO input comparison mask */
50 #define REG_PIO_PMASK 0x60
51 /* Set bits of PMASK */
52 #define REG_PIO_SET_PMASK 0x64
53 /* Clear bits of PMASK */
54 #define REG_PIO_CLR_PMASK 0x68
56 #define ST_GPIO_DIRECTION_BIDIR 0x1
57 #define ST_GPIO_DIRECTION_OUT 0x2
58 #define ST_GPIO_DIRECTION_IN 0x4
60 /**
61 * Packed style retime configuration.
62 * There are two registers cfg0 and cfg1 in this style for each bank.
63 * Each field in this register is 8 bit corresponding to 8 pins in the bank.
65 #define RT_P_CFGS_PER_BANK 2
66 #define RT_P_CFG0_CLK1NOTCLK0_FIELD(reg) REG_FIELD(reg, 0, 7)
67 #define RT_P_CFG0_DELAY_0_FIELD(reg) REG_FIELD(reg, 16, 23)
68 #define RT_P_CFG0_DELAY_1_FIELD(reg) REG_FIELD(reg, 24, 31)
69 #define RT_P_CFG1_INVERTCLK_FIELD(reg) REG_FIELD(reg, 0, 7)
70 #define RT_P_CFG1_RETIME_FIELD(reg) REG_FIELD(reg, 8, 15)
71 #define RT_P_CFG1_CLKNOTDATA_FIELD(reg) REG_FIELD(reg, 16, 23)
72 #define RT_P_CFG1_DOUBLE_EDGE_FIELD(reg) REG_FIELD(reg, 24, 31)
74 /**
75 * Dedicated style retime Configuration register
76 * each register is dedicated per pin.
78 #define RT_D_CFGS_PER_BANK 8
79 #define RT_D_CFG_CLK_SHIFT 0
80 #define RT_D_CFG_CLK_MASK (0x3 << 0)
81 #define RT_D_CFG_CLKNOTDATA_SHIFT 2
82 #define RT_D_CFG_CLKNOTDATA_MASK BIT(2)
83 #define RT_D_CFG_DELAY_SHIFT 3
84 #define RT_D_CFG_DELAY_MASK (0xf << 3)
85 #define RT_D_CFG_DELAY_INNOTOUT_SHIFT 7
86 #define RT_D_CFG_DELAY_INNOTOUT_MASK BIT(7)
87 #define RT_D_CFG_DOUBLE_EDGE_SHIFT 8
88 #define RT_D_CFG_DOUBLE_EDGE_MASK BIT(8)
89 #define RT_D_CFG_INVERTCLK_SHIFT 9
90 #define RT_D_CFG_INVERTCLK_MASK BIT(9)
91 #define RT_D_CFG_RETIME_SHIFT 10
92 #define RT_D_CFG_RETIME_MASK BIT(10)
95 * Pinconf is represented in an opaque unsigned long variable.
96 * Below is the bit allocation details for each possible configuration.
97 * All the bit fields can be encapsulated into four variables
98 * (direction, retime-type, retime-clk, retime-delay)
100 * +----------------+
101 *[31:28]| reserved-3 |
102 * +----------------+-------------
103 *[27] | oe | |
104 * +----------------+ v
105 *[26] | pu | [Direction ]
106 * +----------------+ ^
107 *[25] | od | |
108 * +----------------+-------------
109 *[24] | reserved-2 |
110 * +----------------+-------------
111 *[23] | retime | |
112 * +----------------+ |
113 *[22] | retime-invclk | |
114 * +----------------+ v
115 *[21] |retime-clknotdat| [Retime-type ]
116 * +----------------+ ^
117 *[20] | retime-de | |
118 * +----------------+-------------
119 *[19:18]| retime-clk |------>[Retime-Clk ]
120 * +----------------+
121 *[17:16]| reserved-1 |
122 * +----------------+
123 *[15..0]| retime-delay |------>[Retime Delay]
124 * +----------------+
127 #define ST_PINCONF_UNPACK(conf, param)\
128 ((conf >> ST_PINCONF_ ##param ##_SHIFT) \
129 & ST_PINCONF_ ##param ##_MASK)
131 #define ST_PINCONF_PACK(conf, val, param) (conf |=\
132 ((val & ST_PINCONF_ ##param ##_MASK) << \
133 ST_PINCONF_ ##param ##_SHIFT))
135 /* Output enable */
136 #define ST_PINCONF_OE_MASK 0x1
137 #define ST_PINCONF_OE_SHIFT 27
138 #define ST_PINCONF_OE BIT(27)
139 #define ST_PINCONF_UNPACK_OE(conf) ST_PINCONF_UNPACK(conf, OE)
140 #define ST_PINCONF_PACK_OE(conf) ST_PINCONF_PACK(conf, 1, OE)
142 /* Pull Up */
143 #define ST_PINCONF_PU_MASK 0x1
144 #define ST_PINCONF_PU_SHIFT 26
145 #define ST_PINCONF_PU BIT(26)
146 #define ST_PINCONF_UNPACK_PU(conf) ST_PINCONF_UNPACK(conf, PU)
147 #define ST_PINCONF_PACK_PU(conf) ST_PINCONF_PACK(conf, 1, PU)
149 /* Open Drain */
150 #define ST_PINCONF_OD_MASK 0x1
151 #define ST_PINCONF_OD_SHIFT 25
152 #define ST_PINCONF_OD BIT(25)
153 #define ST_PINCONF_UNPACK_OD(conf) ST_PINCONF_UNPACK(conf, OD)
154 #define ST_PINCONF_PACK_OD(conf) ST_PINCONF_PACK(conf, 1, OD)
156 #define ST_PINCONF_RT_MASK 0x1
157 #define ST_PINCONF_RT_SHIFT 23
158 #define ST_PINCONF_RT BIT(23)
159 #define ST_PINCONF_UNPACK_RT(conf) ST_PINCONF_UNPACK(conf, RT)
160 #define ST_PINCONF_PACK_RT(conf) ST_PINCONF_PACK(conf, 1, RT)
162 #define ST_PINCONF_RT_INVERTCLK_MASK 0x1
163 #define ST_PINCONF_RT_INVERTCLK_SHIFT 22
164 #define ST_PINCONF_RT_INVERTCLK BIT(22)
165 #define ST_PINCONF_UNPACK_RT_INVERTCLK(conf) \
166 ST_PINCONF_UNPACK(conf, RT_INVERTCLK)
167 #define ST_PINCONF_PACK_RT_INVERTCLK(conf) \
168 ST_PINCONF_PACK(conf, 1, RT_INVERTCLK)
170 #define ST_PINCONF_RT_CLKNOTDATA_MASK 0x1
171 #define ST_PINCONF_RT_CLKNOTDATA_SHIFT 21
172 #define ST_PINCONF_RT_CLKNOTDATA BIT(21)
173 #define ST_PINCONF_UNPACK_RT_CLKNOTDATA(conf) \
174 ST_PINCONF_UNPACK(conf, RT_CLKNOTDATA)
175 #define ST_PINCONF_PACK_RT_CLKNOTDATA(conf) \
176 ST_PINCONF_PACK(conf, 1, RT_CLKNOTDATA)
178 #define ST_PINCONF_RT_DOUBLE_EDGE_MASK 0x1
179 #define ST_PINCONF_RT_DOUBLE_EDGE_SHIFT 20
180 #define ST_PINCONF_RT_DOUBLE_EDGE BIT(20)
181 #define ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(conf) \
182 ST_PINCONF_UNPACK(conf, RT_DOUBLE_EDGE)
183 #define ST_PINCONF_PACK_RT_DOUBLE_EDGE(conf) \
184 ST_PINCONF_PACK(conf, 1, RT_DOUBLE_EDGE)
186 #define ST_PINCONF_RT_CLK_MASK 0x3
187 #define ST_PINCONF_RT_CLK_SHIFT 18
188 #define ST_PINCONF_RT_CLK BIT(18)
189 #define ST_PINCONF_UNPACK_RT_CLK(conf) ST_PINCONF_UNPACK(conf, RT_CLK)
190 #define ST_PINCONF_PACK_RT_CLK(conf, val) ST_PINCONF_PACK(conf, val, RT_CLK)
192 /* RETIME_DELAY in Pico Secs */
193 #define ST_PINCONF_RT_DELAY_MASK 0xffff
194 #define ST_PINCONF_RT_DELAY_SHIFT 0
195 #define ST_PINCONF_UNPACK_RT_DELAY(conf) ST_PINCONF_UNPACK(conf, RT_DELAY)
196 #define ST_PINCONF_PACK_RT_DELAY(conf, val) \
197 ST_PINCONF_PACK(conf, val, RT_DELAY)
199 #define ST_GPIO_PINS_PER_BANK (8)
200 #define OF_GPIO_ARGS_MIN (4)
201 #define OF_RT_ARGS_MIN (2)
203 #define gpio_range_to_bank(chip) \
204 container_of(chip, struct st_gpio_bank, range)
206 #define gpio_chip_to_bank(chip) \
207 container_of(chip, struct st_gpio_bank, gpio_chip)
209 #define pc_to_bank(pc) \
210 container_of(pc, struct st_gpio_bank, pc)
212 enum st_retime_style {
213 st_retime_style_none,
214 st_retime_style_packed,
215 st_retime_style_dedicated,
218 struct st_retime_dedicated {
219 struct regmap_field *rt[ST_GPIO_PINS_PER_BANK];
222 struct st_retime_packed {
223 struct regmap_field *clk1notclk0;
224 struct regmap_field *delay_0;
225 struct regmap_field *delay_1;
226 struct regmap_field *invertclk;
227 struct regmap_field *retime;
228 struct regmap_field *clknotdata;
229 struct regmap_field *double_edge;
232 struct st_pio_control {
233 u32 rt_pin_mask;
234 struct regmap_field *alt, *oe, *pu, *od;
235 /* retiming */
236 union {
237 struct st_retime_packed rt_p;
238 struct st_retime_dedicated rt_d;
239 } rt;
242 struct st_pctl_data {
243 const enum st_retime_style rt_style;
244 const unsigned int *input_delays;
245 const int ninput_delays;
246 const unsigned int *output_delays;
247 const int noutput_delays;
248 /* register offset information */
249 const int alt, oe, pu, od, rt;
252 struct st_pinconf {
253 int pin;
254 const char *name;
255 unsigned long config;
256 int altfunc;
259 struct st_pmx_func {
260 const char *name;
261 const char **groups;
262 unsigned ngroups;
265 struct st_pctl_group {
266 const char *name;
267 unsigned int *pins;
268 unsigned npins;
269 struct st_pinconf *pin_conf;
273 * Edge triggers are not supported at hardware level, it is supported by
274 * software by exploiting the level trigger support in hardware.
275 * Software uses a virtual register (EDGE_CONF) for edge trigger configuration
276 * of each gpio pin in a GPIO bank.
278 * Each bank has a 32 bit EDGE_CONF register which is divided in to 8 parts of
279 * 4-bits. Each 4-bit space is allocated for each pin in a gpio bank.
281 * bit allocation per pin is:
282 * Bits: [0 - 3] | [4 - 7] [8 - 11] ... ... ... ... [ 28 - 31]
283 * --------------------------------------------------------
284 * | pin-0 | pin-2 | pin-3 | ... ... ... ... | pin -7 |
285 * --------------------------------------------------------
287 * A pin can have one of following the values in its edge configuration field.
289 * ------- ----------------------------
290 * [0-3] - Description
291 * ------- ----------------------------
292 * 0000 - No edge IRQ.
293 * 0001 - Falling edge IRQ.
294 * 0010 - Rising edge IRQ.
295 * 0011 - Rising and Falling edge IRQ.
296 * ------- ----------------------------
299 #define ST_IRQ_EDGE_CONF_BITS_PER_PIN 4
300 #define ST_IRQ_EDGE_MASK 0xf
301 #define ST_IRQ_EDGE_FALLING BIT(0)
302 #define ST_IRQ_EDGE_RISING BIT(1)
303 #define ST_IRQ_EDGE_BOTH (BIT(0) | BIT(1))
305 #define ST_IRQ_RISING_EDGE_CONF(pin) \
306 (ST_IRQ_EDGE_RISING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
308 #define ST_IRQ_FALLING_EDGE_CONF(pin) \
309 (ST_IRQ_EDGE_FALLING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
311 #define ST_IRQ_BOTH_EDGE_CONF(pin) \
312 (ST_IRQ_EDGE_BOTH << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
314 #define ST_IRQ_EDGE_CONF(conf, pin) \
315 (conf >> (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN) & ST_IRQ_EDGE_MASK)
317 struct st_gpio_bank {
318 struct gpio_chip gpio_chip;
319 struct pinctrl_gpio_range range;
320 void __iomem *base;
321 struct st_pio_control pc;
322 unsigned long irq_edge_conf;
323 spinlock_t lock;
326 struct st_pinctrl {
327 struct device *dev;
328 struct pinctrl_dev *pctl;
329 struct st_gpio_bank *banks;
330 int nbanks;
331 struct st_pmx_func *functions;
332 int nfunctions;
333 struct st_pctl_group *groups;
334 int ngroups;
335 struct regmap *regmap;
336 const struct st_pctl_data *data;
337 void __iomem *irqmux_base;
340 /* SOC specific data */
341 /* STiH415 data */
342 static const unsigned int stih415_input_delays[] = {0, 500, 1000, 1500};
343 static const unsigned int stih415_output_delays[] = {0, 1000, 2000, 3000};
345 #define STIH415_PCTRL_COMMON_DATA \
346 .rt_style = st_retime_style_packed, \
347 .input_delays = stih415_input_delays, \
348 .ninput_delays = ARRAY_SIZE(stih415_input_delays), \
349 .output_delays = stih415_output_delays, \
350 .noutput_delays = ARRAY_SIZE(stih415_output_delays)
352 static const struct st_pctl_data stih415_sbc_data = {
353 STIH415_PCTRL_COMMON_DATA,
354 .alt = 0, .oe = 5, .pu = 7, .od = 9, .rt = 16,
357 static const struct st_pctl_data stih415_front_data = {
358 STIH415_PCTRL_COMMON_DATA,
359 .alt = 0, .oe = 8, .pu = 10, .od = 12, .rt = 16,
362 static const struct st_pctl_data stih415_rear_data = {
363 STIH415_PCTRL_COMMON_DATA,
364 .alt = 0, .oe = 6, .pu = 8, .od = 10, .rt = 38,
367 static const struct st_pctl_data stih415_left_data = {
368 STIH415_PCTRL_COMMON_DATA,
369 .alt = 0, .oe = 3, .pu = 4, .od = 5, .rt = 6,
372 static const struct st_pctl_data stih415_right_data = {
373 STIH415_PCTRL_COMMON_DATA,
374 .alt = 0, .oe = 5, .pu = 7, .od = 9, .rt = 11,
377 /* STiH416 data */
378 static const unsigned int stih416_delays[] = {0, 300, 500, 750, 1000, 1250,
379 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250 };
381 static const struct st_pctl_data stih416_data = {
382 .rt_style = st_retime_style_dedicated,
383 .input_delays = stih416_delays,
384 .ninput_delays = ARRAY_SIZE(stih416_delays),
385 .output_delays = stih416_delays,
386 .noutput_delays = ARRAY_SIZE(stih416_delays),
387 .alt = 0, .oe = 40, .pu = 50, .od = 60, .rt = 100,
390 static const struct st_pctl_data stih407_flashdata = {
391 .rt_style = st_retime_style_none,
392 .input_delays = stih416_delays,
393 .ninput_delays = ARRAY_SIZE(stih416_delays),
394 .output_delays = stih416_delays,
395 .noutput_delays = ARRAY_SIZE(stih416_delays),
396 .alt = 0,
397 .oe = -1, /* Not Available */
398 .pu = -1, /* Not Available */
399 .od = 60,
400 .rt = 100,
403 static struct st_pio_control *st_get_pio_control(
404 struct pinctrl_dev *pctldev, int pin)
406 struct pinctrl_gpio_range *range =
407 pinctrl_find_gpio_range_from_pin(pctldev, pin);
408 struct st_gpio_bank *bank = gpio_range_to_bank(range);
410 return &bank->pc;
413 /* Low level functions.. */
414 static inline int st_gpio_bank(int gpio)
416 return gpio/ST_GPIO_PINS_PER_BANK;
419 static inline int st_gpio_pin(int gpio)
421 return gpio%ST_GPIO_PINS_PER_BANK;
424 static void st_pinconf_set_config(struct st_pio_control *pc,
425 int pin, unsigned long config)
427 struct regmap_field *output_enable = pc->oe;
428 struct regmap_field *pull_up = pc->pu;
429 struct regmap_field *open_drain = pc->od;
430 unsigned int oe_value, pu_value, od_value;
431 unsigned long mask = BIT(pin);
433 if (output_enable) {
434 regmap_field_read(output_enable, &oe_value);
435 oe_value &= ~mask;
436 if (config & ST_PINCONF_OE)
437 oe_value |= mask;
438 regmap_field_write(output_enable, oe_value);
441 if (pull_up) {
442 regmap_field_read(pull_up, &pu_value);
443 pu_value &= ~mask;
444 if (config & ST_PINCONF_PU)
445 pu_value |= mask;
446 regmap_field_write(pull_up, pu_value);
449 if (open_drain) {
450 regmap_field_read(open_drain, &od_value);
451 od_value &= ~mask;
452 if (config & ST_PINCONF_OD)
453 od_value |= mask;
454 regmap_field_write(open_drain, od_value);
458 static void st_pctl_set_function(struct st_pio_control *pc,
459 int pin_id, int function)
461 struct regmap_field *alt = pc->alt;
462 unsigned int val;
463 int pin = st_gpio_pin(pin_id);
464 int offset = pin * 4;
466 if (!alt)
467 return;
469 regmap_field_read(alt, &val);
470 val &= ~(0xf << offset);
471 val |= function << offset;
472 regmap_field_write(alt, val);
475 static unsigned int st_pctl_get_pin_function(struct st_pio_control *pc, int pin)
477 struct regmap_field *alt = pc->alt;
478 unsigned int val;
479 int offset = pin * 4;
481 if (!alt)
482 return 0;
484 regmap_field_read(alt, &val);
486 return (val >> offset) & 0xf;
489 static unsigned long st_pinconf_delay_to_bit(unsigned int delay,
490 const struct st_pctl_data *data, unsigned long config)
492 const unsigned int *delay_times;
493 int num_delay_times, i, closest_index = -1;
494 unsigned int closest_divergence = UINT_MAX;
496 if (ST_PINCONF_UNPACK_OE(config)) {
497 delay_times = data->output_delays;
498 num_delay_times = data->noutput_delays;
499 } else {
500 delay_times = data->input_delays;
501 num_delay_times = data->ninput_delays;
504 for (i = 0; i < num_delay_times; i++) {
505 unsigned int divergence = abs(delay - delay_times[i]);
507 if (divergence == 0)
508 return i;
510 if (divergence < closest_divergence) {
511 closest_divergence = divergence;
512 closest_index = i;
516 pr_warn("Attempt to set delay %d, closest available %d\n",
517 delay, delay_times[closest_index]);
519 return closest_index;
522 static unsigned long st_pinconf_bit_to_delay(unsigned int index,
523 const struct st_pctl_data *data, unsigned long output)
525 const unsigned int *delay_times;
526 int num_delay_times;
528 if (output) {
529 delay_times = data->output_delays;
530 num_delay_times = data->noutput_delays;
531 } else {
532 delay_times = data->input_delays;
533 num_delay_times = data->ninput_delays;
536 if (index < num_delay_times) {
537 return delay_times[index];
538 } else {
539 pr_warn("Delay not found in/out delay list\n");
540 return 0;
544 static void st_regmap_field_bit_set_clear_pin(struct regmap_field *field,
545 int enable, int pin)
547 unsigned int val = 0;
549 regmap_field_read(field, &val);
550 if (enable)
551 val |= BIT(pin);
552 else
553 val &= ~BIT(pin);
554 regmap_field_write(field, val);
557 static void st_pinconf_set_retime_packed(struct st_pinctrl *info,
558 struct st_pio_control *pc, unsigned long config, int pin)
560 const struct st_pctl_data *data = info->data;
561 struct st_retime_packed *rt_p = &pc->rt.rt_p;
562 unsigned int delay;
564 st_regmap_field_bit_set_clear_pin(rt_p->clk1notclk0,
565 ST_PINCONF_UNPACK_RT_CLK(config), pin);
567 st_regmap_field_bit_set_clear_pin(rt_p->clknotdata,
568 ST_PINCONF_UNPACK_RT_CLKNOTDATA(config), pin);
570 st_regmap_field_bit_set_clear_pin(rt_p->double_edge,
571 ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config), pin);
573 st_regmap_field_bit_set_clear_pin(rt_p->invertclk,
574 ST_PINCONF_UNPACK_RT_INVERTCLK(config), pin);
576 st_regmap_field_bit_set_clear_pin(rt_p->retime,
577 ST_PINCONF_UNPACK_RT(config), pin);
579 delay = st_pinconf_delay_to_bit(ST_PINCONF_UNPACK_RT_DELAY(config),
580 data, config);
581 /* 2 bit delay, lsb */
582 st_regmap_field_bit_set_clear_pin(rt_p->delay_0, delay & 0x1, pin);
583 /* 2 bit delay, msb */
584 st_regmap_field_bit_set_clear_pin(rt_p->delay_1, delay & 0x2, pin);
588 static void st_pinconf_set_retime_dedicated(struct st_pinctrl *info,
589 struct st_pio_control *pc, unsigned long config, int pin)
591 int input = ST_PINCONF_UNPACK_OE(config) ? 0 : 1;
592 int clk = ST_PINCONF_UNPACK_RT_CLK(config);
593 int clknotdata = ST_PINCONF_UNPACK_RT_CLKNOTDATA(config);
594 int double_edge = ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config);
595 int invertclk = ST_PINCONF_UNPACK_RT_INVERTCLK(config);
596 int retime = ST_PINCONF_UNPACK_RT(config);
598 unsigned long delay = st_pinconf_delay_to_bit(
599 ST_PINCONF_UNPACK_RT_DELAY(config),
600 info->data, config);
601 struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
603 unsigned long retime_config =
604 ((clk) << RT_D_CFG_CLK_SHIFT) |
605 ((delay) << RT_D_CFG_DELAY_SHIFT) |
606 ((input) << RT_D_CFG_DELAY_INNOTOUT_SHIFT) |
607 ((retime) << RT_D_CFG_RETIME_SHIFT) |
608 ((clknotdata) << RT_D_CFG_CLKNOTDATA_SHIFT) |
609 ((invertclk) << RT_D_CFG_INVERTCLK_SHIFT) |
610 ((double_edge) << RT_D_CFG_DOUBLE_EDGE_SHIFT);
612 regmap_field_write(rt_d->rt[pin], retime_config);
615 static void st_pinconf_get_direction(struct st_pio_control *pc,
616 int pin, unsigned long *config)
618 unsigned int oe_value, pu_value, od_value;
620 if (pc->oe) {
621 regmap_field_read(pc->oe, &oe_value);
622 if (oe_value & BIT(pin))
623 ST_PINCONF_PACK_OE(*config);
626 if (pc->pu) {
627 regmap_field_read(pc->pu, &pu_value);
628 if (pu_value & BIT(pin))
629 ST_PINCONF_PACK_PU(*config);
632 if (pc->od) {
633 regmap_field_read(pc->od, &od_value);
634 if (od_value & BIT(pin))
635 ST_PINCONF_PACK_OD(*config);
639 static int st_pinconf_get_retime_packed(struct st_pinctrl *info,
640 struct st_pio_control *pc, int pin, unsigned long *config)
642 const struct st_pctl_data *data = info->data;
643 struct st_retime_packed *rt_p = &pc->rt.rt_p;
644 unsigned int delay_bits, delay, delay0, delay1, val;
645 int output = ST_PINCONF_UNPACK_OE(*config);
647 if (!regmap_field_read(rt_p->retime, &val) && (val & BIT(pin)))
648 ST_PINCONF_PACK_RT(*config);
650 if (!regmap_field_read(rt_p->clk1notclk0, &val) && (val & BIT(pin)))
651 ST_PINCONF_PACK_RT_CLK(*config, 1);
653 if (!regmap_field_read(rt_p->clknotdata, &val) && (val & BIT(pin)))
654 ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
656 if (!regmap_field_read(rt_p->double_edge, &val) && (val & BIT(pin)))
657 ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
659 if (!regmap_field_read(rt_p->invertclk, &val) && (val & BIT(pin)))
660 ST_PINCONF_PACK_RT_INVERTCLK(*config);
662 regmap_field_read(rt_p->delay_0, &delay0);
663 regmap_field_read(rt_p->delay_1, &delay1);
664 delay_bits = (((delay1 & BIT(pin)) ? 1 : 0) << 1) |
665 (((delay0 & BIT(pin)) ? 1 : 0));
666 delay = st_pinconf_bit_to_delay(delay_bits, data, output);
667 ST_PINCONF_PACK_RT_DELAY(*config, delay);
669 return 0;
672 static int st_pinconf_get_retime_dedicated(struct st_pinctrl *info,
673 struct st_pio_control *pc, int pin, unsigned long *config)
675 unsigned int value;
676 unsigned long delay_bits, delay, rt_clk;
677 int output = ST_PINCONF_UNPACK_OE(*config);
678 struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
680 regmap_field_read(rt_d->rt[pin], &value);
682 rt_clk = (value & RT_D_CFG_CLK_MASK) >> RT_D_CFG_CLK_SHIFT;
683 ST_PINCONF_PACK_RT_CLK(*config, rt_clk);
685 delay_bits = (value & RT_D_CFG_DELAY_MASK) >> RT_D_CFG_DELAY_SHIFT;
686 delay = st_pinconf_bit_to_delay(delay_bits, info->data, output);
687 ST_PINCONF_PACK_RT_DELAY(*config, delay);
689 if (value & RT_D_CFG_CLKNOTDATA_MASK)
690 ST_PINCONF_PACK_RT_CLKNOTDATA(*config);
692 if (value & RT_D_CFG_DOUBLE_EDGE_MASK)
693 ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config);
695 if (value & RT_D_CFG_INVERTCLK_MASK)
696 ST_PINCONF_PACK_RT_INVERTCLK(*config);
698 if (value & RT_D_CFG_RETIME_MASK)
699 ST_PINCONF_PACK_RT(*config);
701 return 0;
704 /* GPIO related functions */
706 static inline void __st_gpio_set(struct st_gpio_bank *bank,
707 unsigned offset, int value)
709 if (value)
710 writel(BIT(offset), bank->base + REG_PIO_SET_POUT);
711 else
712 writel(BIT(offset), bank->base + REG_PIO_CLR_POUT);
715 static void st_gpio_direction(struct st_gpio_bank *bank,
716 unsigned int gpio, unsigned int direction)
718 int offset = st_gpio_pin(gpio);
719 int i = 0;
721 * There are three configuration registers (PIOn_PC0, PIOn_PC1
722 * and PIOn_PC2) for each port. These are used to configure the
723 * PIO port pins. Each pin can be configured as an input, output,
724 * bidirectional, or alternative function pin. Three bits, one bit
725 * from each of the three registers, configure the corresponding bit of
726 * the port. Valid bit settings is:
728 * PC2 PC1 PC0 Direction.
729 * 0 0 0 [Input Weak pull-up]
730 * 0 0 or 1 1 [Bidirection]
731 * 0 1 0 [Output]
732 * 1 0 0 [Input]
734 * PIOn_SET_PC and PIOn_CLR_PC registers are used to set and clear bits
735 * individually.
737 for (i = 0; i <= 2; i++) {
738 if (direction & BIT(i))
739 writel(BIT(offset), bank->base + REG_PIO_SET_PC(i));
740 else
741 writel(BIT(offset), bank->base + REG_PIO_CLR_PC(i));
745 static int st_gpio_get(struct gpio_chip *chip, unsigned offset)
747 struct st_gpio_bank *bank = gpio_chip_to_bank(chip);
749 return !!(readl(bank->base + REG_PIO_PIN) & BIT(offset));
752 static void st_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
754 struct st_gpio_bank *bank = gpio_chip_to_bank(chip);
755 __st_gpio_set(bank, offset, value);
758 static int st_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
760 pinctrl_gpio_direction_input(chip->base + offset);
762 return 0;
765 static int st_gpio_direction_output(struct gpio_chip *chip,
766 unsigned offset, int value)
768 struct st_gpio_bank *bank = gpio_chip_to_bank(chip);
770 __st_gpio_set(bank, offset, value);
771 pinctrl_gpio_direction_output(chip->base + offset);
773 return 0;
776 static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
778 struct st_gpio_bank *bank = gpio_chip_to_bank(chip);
779 struct st_pio_control pc = bank->pc;
780 unsigned long config;
781 unsigned int direction = 0;
782 unsigned int function;
783 unsigned int value;
784 int i = 0;
786 /* Alternate function direction is handled by Pinctrl */
787 function = st_pctl_get_pin_function(&pc, offset);
788 if (function) {
789 st_pinconf_get_direction(&pc, offset, &config);
790 return !ST_PINCONF_UNPACK_OE(config);
794 * GPIO direction is handled differently
795 * - See st_gpio_direction() above for an explanation
797 for (i = 0; i <= 2; i++) {
798 value = readl(bank->base + REG_PIO_PC(i));
799 direction |= ((value >> offset) & 0x1) << i;
802 return (direction == ST_GPIO_DIRECTION_IN);
805 static int st_gpio_xlate(struct gpio_chip *gc,
806 const struct of_phandle_args *gpiospec, u32 *flags)
808 if (WARN_ON(gc->of_gpio_n_cells < 1))
809 return -EINVAL;
811 if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
812 return -EINVAL;
814 if (gpiospec->args[0] > gc->ngpio)
815 return -EINVAL;
817 return gpiospec->args[0];
820 /* Pinctrl Groups */
821 static int st_pctl_get_groups_count(struct pinctrl_dev *pctldev)
823 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
825 return info->ngroups;
828 static const char *st_pctl_get_group_name(struct pinctrl_dev *pctldev,
829 unsigned selector)
831 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
833 return info->groups[selector].name;
836 static int st_pctl_get_group_pins(struct pinctrl_dev *pctldev,
837 unsigned selector, const unsigned **pins, unsigned *npins)
839 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
841 if (selector >= info->ngroups)
842 return -EINVAL;
844 *pins = info->groups[selector].pins;
845 *npins = info->groups[selector].npins;
847 return 0;
850 static const inline struct st_pctl_group *st_pctl_find_group_by_name(
851 const struct st_pinctrl *info, const char *name)
853 int i;
855 for (i = 0; i < info->ngroups; i++) {
856 if (!strcmp(info->groups[i].name, name))
857 return &info->groups[i];
860 return NULL;
863 static int st_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
864 struct device_node *np, struct pinctrl_map **map, unsigned *num_maps)
866 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
867 const struct st_pctl_group *grp;
868 struct pinctrl_map *new_map;
869 struct device_node *parent;
870 int map_num, i;
872 grp = st_pctl_find_group_by_name(info, np->name);
873 if (!grp) {
874 dev_err(info->dev, "unable to find group for node %s\n",
875 np->name);
876 return -EINVAL;
879 map_num = grp->npins + 1;
880 new_map = devm_kzalloc(pctldev->dev,
881 sizeof(*new_map) * map_num, GFP_KERNEL);
882 if (!new_map)
883 return -ENOMEM;
885 parent = of_get_parent(np);
886 if (!parent) {
887 devm_kfree(pctldev->dev, new_map);
888 return -EINVAL;
891 *map = new_map;
892 *num_maps = map_num;
893 new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
894 new_map[0].data.mux.function = parent->name;
895 new_map[0].data.mux.group = np->name;
896 of_node_put(parent);
898 /* create config map per pin */
899 new_map++;
900 for (i = 0; i < grp->npins; i++) {
901 new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
902 new_map[i].data.configs.group_or_pin =
903 pin_get_name(pctldev, grp->pins[i]);
904 new_map[i].data.configs.configs = &grp->pin_conf[i].config;
905 new_map[i].data.configs.num_configs = 1;
907 dev_info(pctldev->dev, "maps: function %s group %s num %d\n",
908 (*map)->data.mux.function, grp->name, map_num);
910 return 0;
913 static void st_pctl_dt_free_map(struct pinctrl_dev *pctldev,
914 struct pinctrl_map *map, unsigned num_maps)
918 static struct pinctrl_ops st_pctlops = {
919 .get_groups_count = st_pctl_get_groups_count,
920 .get_group_pins = st_pctl_get_group_pins,
921 .get_group_name = st_pctl_get_group_name,
922 .dt_node_to_map = st_pctl_dt_node_to_map,
923 .dt_free_map = st_pctl_dt_free_map,
926 /* Pinmux */
927 static int st_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
929 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
931 return info->nfunctions;
934 static const char *st_pmx_get_fname(struct pinctrl_dev *pctldev,
935 unsigned selector)
937 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
939 return info->functions[selector].name;
942 static int st_pmx_get_groups(struct pinctrl_dev *pctldev,
943 unsigned selector, const char * const **grps, unsigned * const ngrps)
945 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
946 *grps = info->functions[selector].groups;
947 *ngrps = info->functions[selector].ngroups;
949 return 0;
952 static int st_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned fselector,
953 unsigned group)
955 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
956 struct st_pinconf *conf = info->groups[group].pin_conf;
957 struct st_pio_control *pc;
958 int i;
960 for (i = 0; i < info->groups[group].npins; i++) {
961 pc = st_get_pio_control(pctldev, conf[i].pin);
962 st_pctl_set_function(pc, conf[i].pin, conf[i].altfunc);
965 return 0;
968 static int st_pmx_set_gpio_direction(struct pinctrl_dev *pctldev,
969 struct pinctrl_gpio_range *range, unsigned gpio,
970 bool input)
972 struct st_gpio_bank *bank = gpio_range_to_bank(range);
974 * When a PIO bank is used in its primary function mode (altfunc = 0)
975 * Output Enable (OE), Open Drain(OD), and Pull Up (PU)
976 * for the primary PIO functions are driven by the related PIO block
978 st_pctl_set_function(&bank->pc, gpio, 0);
979 st_gpio_direction(bank, gpio, input ?
980 ST_GPIO_DIRECTION_IN : ST_GPIO_DIRECTION_OUT);
982 return 0;
985 static struct pinmux_ops st_pmxops = {
986 .get_functions_count = st_pmx_get_funcs_count,
987 .get_function_name = st_pmx_get_fname,
988 .get_function_groups = st_pmx_get_groups,
989 .set_mux = st_pmx_set_mux,
990 .gpio_set_direction = st_pmx_set_gpio_direction,
993 /* Pinconf */
994 static void st_pinconf_get_retime(struct st_pinctrl *info,
995 struct st_pio_control *pc, int pin, unsigned long *config)
997 if (info->data->rt_style == st_retime_style_packed)
998 st_pinconf_get_retime_packed(info, pc, pin, config);
999 else if (info->data->rt_style == st_retime_style_dedicated)
1000 if ((BIT(pin) & pc->rt_pin_mask))
1001 st_pinconf_get_retime_dedicated(info, pc,
1002 pin, config);
1005 static void st_pinconf_set_retime(struct st_pinctrl *info,
1006 struct st_pio_control *pc, int pin, unsigned long config)
1008 if (info->data->rt_style == st_retime_style_packed)
1009 st_pinconf_set_retime_packed(info, pc, config, pin);
1010 else if (info->data->rt_style == st_retime_style_dedicated)
1011 if ((BIT(pin) & pc->rt_pin_mask))
1012 st_pinconf_set_retime_dedicated(info, pc,
1013 config, pin);
1016 static int st_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin_id,
1017 unsigned long *configs, unsigned num_configs)
1019 int pin = st_gpio_pin(pin_id);
1020 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
1021 struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
1022 int i;
1024 for (i = 0; i < num_configs; i++) {
1025 st_pinconf_set_config(pc, pin, configs[i]);
1026 st_pinconf_set_retime(info, pc, pin, configs[i]);
1027 } /* for each config */
1029 return 0;
1032 static int st_pinconf_get(struct pinctrl_dev *pctldev,
1033 unsigned pin_id, unsigned long *config)
1035 int pin = st_gpio_pin(pin_id);
1036 struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
1037 struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id);
1039 *config = 0;
1040 st_pinconf_get_direction(pc, pin, config);
1041 st_pinconf_get_retime(info, pc, pin, config);
1043 return 0;
1046 static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
1047 struct seq_file *s, unsigned pin_id)
1049 struct st_pio_control *pc;
1050 unsigned long config;
1051 unsigned int function;
1052 int offset = st_gpio_pin(pin_id);
1053 char f[16];
1055 mutex_unlock(&pctldev->mutex);
1056 pc = st_get_pio_control(pctldev, pin_id);
1057 st_pinconf_get(pctldev, pin_id, &config);
1058 mutex_lock(&pctldev->mutex);
1060 function = st_pctl_get_pin_function(pc, offset);
1061 if (function)
1062 snprintf(f, 10, "Alt Fn %d", function);
1063 else
1064 snprintf(f, 5, "GPIO");
1066 seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
1067 "\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
1068 "de:%ld,rt-clk:%ld,rt-delay:%ld]",
1069 !st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset),
1070 ST_PINCONF_UNPACK_PU(config),
1071 ST_PINCONF_UNPACK_OD(config),
1073 ST_PINCONF_UNPACK_RT(config),
1074 ST_PINCONF_UNPACK_RT_INVERTCLK(config),
1075 ST_PINCONF_UNPACK_RT_CLKNOTDATA(config),
1076 ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config),
1077 ST_PINCONF_UNPACK_RT_CLK(config),
1078 ST_PINCONF_UNPACK_RT_DELAY(config));
1081 static struct pinconf_ops st_confops = {
1082 .pin_config_get = st_pinconf_get,
1083 .pin_config_set = st_pinconf_set,
1084 .pin_config_dbg_show = st_pinconf_dbg_show,
1087 static void st_pctl_dt_child_count(struct st_pinctrl *info,
1088 struct device_node *np)
1090 struct device_node *child;
1091 for_each_child_of_node(np, child) {
1092 if (of_property_read_bool(child, "gpio-controller")) {
1093 info->nbanks++;
1094 } else {
1095 info->nfunctions++;
1096 info->ngroups += of_get_child_count(child);
1101 static int st_pctl_dt_setup_retime_packed(struct st_pinctrl *info,
1102 int bank, struct st_pio_control *pc)
1104 struct device *dev = info->dev;
1105 struct regmap *rm = info->regmap;
1106 const struct st_pctl_data *data = info->data;
1107 /* 2 registers per bank */
1108 int reg = (data->rt + bank * RT_P_CFGS_PER_BANK) * 4;
1109 struct st_retime_packed *rt_p = &pc->rt.rt_p;
1110 /* cfg0 */
1111 struct reg_field clk1notclk0 = RT_P_CFG0_CLK1NOTCLK0_FIELD(reg);
1112 struct reg_field delay_0 = RT_P_CFG0_DELAY_0_FIELD(reg);
1113 struct reg_field delay_1 = RT_P_CFG0_DELAY_1_FIELD(reg);
1114 /* cfg1 */
1115 struct reg_field invertclk = RT_P_CFG1_INVERTCLK_FIELD(reg + 4);
1116 struct reg_field retime = RT_P_CFG1_RETIME_FIELD(reg + 4);
1117 struct reg_field clknotdata = RT_P_CFG1_CLKNOTDATA_FIELD(reg + 4);
1118 struct reg_field double_edge = RT_P_CFG1_DOUBLE_EDGE_FIELD(reg + 4);
1120 rt_p->clk1notclk0 = devm_regmap_field_alloc(dev, rm, clk1notclk0);
1121 rt_p->delay_0 = devm_regmap_field_alloc(dev, rm, delay_0);
1122 rt_p->delay_1 = devm_regmap_field_alloc(dev, rm, delay_1);
1123 rt_p->invertclk = devm_regmap_field_alloc(dev, rm, invertclk);
1124 rt_p->retime = devm_regmap_field_alloc(dev, rm, retime);
1125 rt_p->clknotdata = devm_regmap_field_alloc(dev, rm, clknotdata);
1126 rt_p->double_edge = devm_regmap_field_alloc(dev, rm, double_edge);
1128 if (IS_ERR(rt_p->clk1notclk0) || IS_ERR(rt_p->delay_0) ||
1129 IS_ERR(rt_p->delay_1) || IS_ERR(rt_p->invertclk) ||
1130 IS_ERR(rt_p->retime) || IS_ERR(rt_p->clknotdata) ||
1131 IS_ERR(rt_p->double_edge))
1132 return -EINVAL;
1134 return 0;
1137 static int st_pctl_dt_setup_retime_dedicated(struct st_pinctrl *info,
1138 int bank, struct st_pio_control *pc)
1140 struct device *dev = info->dev;
1141 struct regmap *rm = info->regmap;
1142 const struct st_pctl_data *data = info->data;
1143 /* 8 registers per bank */
1144 int reg_offset = (data->rt + bank * RT_D_CFGS_PER_BANK) * 4;
1145 struct st_retime_dedicated *rt_d = &pc->rt.rt_d;
1146 unsigned int j;
1147 u32 pin_mask = pc->rt_pin_mask;
1149 for (j = 0; j < RT_D_CFGS_PER_BANK; j++) {
1150 if (BIT(j) & pin_mask) {
1151 struct reg_field reg = REG_FIELD(reg_offset, 0, 31);
1152 rt_d->rt[j] = devm_regmap_field_alloc(dev, rm, reg);
1153 if (IS_ERR(rt_d->rt[j]))
1154 return -EINVAL;
1155 reg_offset += 4;
1158 return 0;
1161 static int st_pctl_dt_setup_retime(struct st_pinctrl *info,
1162 int bank, struct st_pio_control *pc)
1164 const struct st_pctl_data *data = info->data;
1165 if (data->rt_style == st_retime_style_packed)
1166 return st_pctl_dt_setup_retime_packed(info, bank, pc);
1167 else if (data->rt_style == st_retime_style_dedicated)
1168 return st_pctl_dt_setup_retime_dedicated(info, bank, pc);
1170 return -EINVAL;
1174 static struct regmap_field *st_pc_get_value(struct device *dev,
1175 struct regmap *regmap, int bank,
1176 int data, int lsb, int msb)
1178 struct reg_field reg = REG_FIELD((data + bank) * 4, lsb, msb);
1180 if (data < 0)
1181 return NULL;
1183 return devm_regmap_field_alloc(dev, regmap, reg);
1186 static void st_parse_syscfgs(struct st_pinctrl *info, int bank,
1187 struct device_node *np)
1189 const struct st_pctl_data *data = info->data;
1191 * For a given shared register like OE/PU/OD, there are 8 bits per bank
1192 * 0:7 belongs to bank0, 8:15 belongs to bank1 ...
1193 * So each register is shared across 4 banks.
1195 int lsb = (bank%4) * ST_GPIO_PINS_PER_BANK;
1196 int msb = lsb + ST_GPIO_PINS_PER_BANK - 1;
1197 struct st_pio_control *pc = &info->banks[bank].pc;
1198 struct device *dev = info->dev;
1199 struct regmap *regmap = info->regmap;
1201 pc->alt = st_pc_get_value(dev, regmap, bank, data->alt, 0, 31);
1202 pc->oe = st_pc_get_value(dev, regmap, bank/4, data->oe, lsb, msb);
1203 pc->pu = st_pc_get_value(dev, regmap, bank/4, data->pu, lsb, msb);
1204 pc->od = st_pc_get_value(dev, regmap, bank/4, data->od, lsb, msb);
1206 /* retime avaiable for all pins by default */
1207 pc->rt_pin_mask = 0xff;
1208 of_property_read_u32(np, "st,retime-pin-mask", &pc->rt_pin_mask);
1209 st_pctl_dt_setup_retime(info, bank, pc);
1211 return;
1215 * Each pin is represented in of the below forms.
1216 * <bank offset mux direction rt_type rt_delay rt_clk>
1218 static int st_pctl_dt_parse_groups(struct device_node *np,
1219 struct st_pctl_group *grp, struct st_pinctrl *info, int idx)
1221 /* bank pad direction val altfunction */
1222 const __be32 *list;
1223 struct property *pp;
1224 struct st_pinconf *conf;
1225 struct device_node *pins;
1226 int i = 0, npins = 0, nr_props;
1228 pins = of_get_child_by_name(np, "st,pins");
1229 if (!pins)
1230 return -ENODATA;
1232 for_each_property_of_node(pins, pp) {
1233 /* Skip those we do not want to proceed */
1234 if (!strcmp(pp->name, "name"))
1235 continue;
1237 if (pp && (pp->length/sizeof(__be32)) >= OF_GPIO_ARGS_MIN) {
1238 npins++;
1239 } else {
1240 pr_warn("Invalid st,pins in %s node\n", np->name);
1241 return -EINVAL;
1245 grp->npins = npins;
1246 grp->name = np->name;
1247 grp->pins = devm_kzalloc(info->dev, npins * sizeof(u32), GFP_KERNEL);
1248 grp->pin_conf = devm_kzalloc(info->dev,
1249 npins * sizeof(*conf), GFP_KERNEL);
1251 if (!grp->pins || !grp->pin_conf)
1252 return -ENOMEM;
1254 /* <bank offset mux direction rt_type rt_delay rt_clk> */
1255 for_each_property_of_node(pins, pp) {
1256 if (!strcmp(pp->name, "name"))
1257 continue;
1258 nr_props = pp->length/sizeof(u32);
1259 list = pp->value;
1260 conf = &grp->pin_conf[i];
1262 /* bank & offset */
1263 be32_to_cpup(list++);
1264 be32_to_cpup(list++);
1265 conf->pin = of_get_named_gpio(pins, pp->name, 0);
1266 conf->name = pp->name;
1267 grp->pins[i] = conf->pin;
1268 /* mux */
1269 conf->altfunc = be32_to_cpup(list++);
1270 conf->config = 0;
1271 /* direction */
1272 conf->config |= be32_to_cpup(list++);
1273 /* rt_type rt_delay rt_clk */
1274 if (nr_props >= OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN) {
1275 /* rt_type */
1276 conf->config |= be32_to_cpup(list++);
1277 /* rt_delay */
1278 conf->config |= be32_to_cpup(list++);
1279 /* rt_clk */
1280 if (nr_props > OF_GPIO_ARGS_MIN + OF_RT_ARGS_MIN)
1281 conf->config |= be32_to_cpup(list++);
1283 i++;
1285 of_node_put(pins);
1287 return 0;
1290 static int st_pctl_parse_functions(struct device_node *np,
1291 struct st_pinctrl *info, u32 index, int *grp_index)
1293 struct device_node *child;
1294 struct st_pmx_func *func;
1295 struct st_pctl_group *grp;
1296 int ret, i;
1298 func = &info->functions[index];
1299 func->name = np->name;
1300 func->ngroups = of_get_child_count(np);
1301 if (func->ngroups == 0) {
1302 dev_err(info->dev, "No groups defined\n");
1303 return -EINVAL;
1305 func->groups = devm_kzalloc(info->dev,
1306 func->ngroups * sizeof(char *), GFP_KERNEL);
1307 if (!func->groups)
1308 return -ENOMEM;
1310 i = 0;
1311 for_each_child_of_node(np, child) {
1312 func->groups[i] = child->name;
1313 grp = &info->groups[*grp_index];
1314 *grp_index += 1;
1315 ret = st_pctl_dt_parse_groups(child, grp, info, i++);
1316 if (ret)
1317 return ret;
1319 dev_info(info->dev, "Function[%d\t name:%s,\tgroups:%d]\n",
1320 index, func->name, func->ngroups);
1322 return 0;
1325 static void st_gpio_irq_mask(struct irq_data *d)
1327 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1328 struct st_gpio_bank *bank = gpio_chip_to_bank(gc);
1330 writel(BIT(d->hwirq), bank->base + REG_PIO_CLR_PMASK);
1333 static void st_gpio_irq_unmask(struct irq_data *d)
1335 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1336 struct st_gpio_bank *bank = gpio_chip_to_bank(gc);
1338 writel(BIT(d->hwirq), bank->base + REG_PIO_SET_PMASK);
1341 static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
1343 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
1344 struct st_gpio_bank *bank = gpio_chip_to_bank(gc);
1345 unsigned long flags;
1346 int comp, pin = d->hwirq;
1347 u32 val;
1348 u32 pin_edge_conf = 0;
1350 switch (type) {
1351 case IRQ_TYPE_LEVEL_HIGH:
1352 comp = 0;
1353 break;
1354 case IRQ_TYPE_EDGE_FALLING:
1355 comp = 0;
1356 pin_edge_conf = ST_IRQ_FALLING_EDGE_CONF(pin);
1357 break;
1358 case IRQ_TYPE_LEVEL_LOW:
1359 comp = 1;
1360 break;
1361 case IRQ_TYPE_EDGE_RISING:
1362 comp = 1;
1363 pin_edge_conf = ST_IRQ_RISING_EDGE_CONF(pin);
1364 break;
1365 case IRQ_TYPE_EDGE_BOTH:
1366 comp = st_gpio_get(&bank->gpio_chip, pin);
1367 pin_edge_conf = ST_IRQ_BOTH_EDGE_CONF(pin);
1368 break;
1369 default:
1370 return -EINVAL;
1373 spin_lock_irqsave(&bank->lock, flags);
1374 bank->irq_edge_conf &= ~(ST_IRQ_EDGE_MASK << (
1375 pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN));
1376 bank->irq_edge_conf |= pin_edge_conf;
1377 spin_unlock_irqrestore(&bank->lock, flags);
1379 val = readl(bank->base + REG_PIO_PCOMP);
1380 val &= ~BIT(pin);
1381 val |= (comp << pin);
1382 writel(val, bank->base + REG_PIO_PCOMP);
1384 return 0;
1388 * As edge triggers are not supported at hardware level, it is supported by
1389 * software by exploiting the level trigger support in hardware.
1391 * Steps for detection raising edge interrupt in software.
1393 * Step 1: CONFIGURE pin to detect level LOW interrupts.
1395 * Step 2: DETECT level LOW interrupt and in irqmux/gpio bank interrupt handler,
1396 * if the value of pin is low, then CONFIGURE pin for level HIGH interrupt.
1397 * IGNORE calling the actual interrupt handler for the pin at this stage.
1399 * Step 3: DETECT level HIGH interrupt and in irqmux/gpio-bank interrupt handler
1400 * if the value of pin is HIGH, CONFIGURE pin for level LOW interrupt and then
1401 * DISPATCH the interrupt to the interrupt handler of the pin.
1403 * step-1 ________ __________
1404 * | | step - 3
1405 * | |
1406 * step -2 |_____|
1408 * falling edge is also detected int the same way.
1411 static void __gpio_irq_handler(struct st_gpio_bank *bank)
1413 unsigned long port_in, port_mask, port_comp, active_irqs;
1414 unsigned long bank_edge_mask, flags;
1415 int n, val, ecfg;
1417 spin_lock_irqsave(&bank->lock, flags);
1418 bank_edge_mask = bank->irq_edge_conf;
1419 spin_unlock_irqrestore(&bank->lock, flags);
1421 for (;;) {
1422 port_in = readl(bank->base + REG_PIO_PIN);
1423 port_comp = readl(bank->base + REG_PIO_PCOMP);
1424 port_mask = readl(bank->base + REG_PIO_PMASK);
1426 active_irqs = (port_in ^ port_comp) & port_mask;
1428 if (active_irqs == 0)
1429 break;
1431 for_each_set_bit(n, &active_irqs, BITS_PER_LONG) {
1432 /* check if we are detecting fake edges ... */
1433 ecfg = ST_IRQ_EDGE_CONF(bank_edge_mask, n);
1435 if (ecfg) {
1436 /* edge detection. */
1437 val = st_gpio_get(&bank->gpio_chip, n);
1439 writel(BIT(n),
1440 val ? bank->base + REG_PIO_SET_PCOMP :
1441 bank->base + REG_PIO_CLR_PCOMP);
1443 if (ecfg != ST_IRQ_EDGE_BOTH &&
1444 !((ecfg & ST_IRQ_EDGE_FALLING) ^ val))
1445 continue;
1448 generic_handle_irq(irq_find_mapping(bank->gpio_chip.irqdomain, n));
1453 static void st_gpio_irq_handler(struct irq_desc *desc)
1455 /* interrupt dedicated per bank */
1456 struct irq_chip *chip = irq_desc_get_chip(desc);
1457 struct gpio_chip *gc = irq_desc_get_handler_data(desc);
1458 struct st_gpio_bank *bank = gpio_chip_to_bank(gc);
1460 chained_irq_enter(chip, desc);
1461 __gpio_irq_handler(bank);
1462 chained_irq_exit(chip, desc);
1465 static void st_gpio_irqmux_handler(struct irq_desc *desc)
1467 struct irq_chip *chip = irq_desc_get_chip(desc);
1468 struct st_pinctrl *info = irq_desc_get_handler_data(desc);
1469 unsigned long status;
1470 int n;
1472 chained_irq_enter(chip, desc);
1474 status = readl(info->irqmux_base);
1476 for_each_set_bit(n, &status, info->nbanks)
1477 __gpio_irq_handler(&info->banks[n]);
1479 chained_irq_exit(chip, desc);
1482 static struct gpio_chip st_gpio_template = {
1483 .request = gpiochip_generic_request,
1484 .free = gpiochip_generic_free,
1485 .get = st_gpio_get,
1486 .set = st_gpio_set,
1487 .direction_input = st_gpio_direction_input,
1488 .direction_output = st_gpio_direction_output,
1489 .get_direction = st_gpio_get_direction,
1490 .ngpio = ST_GPIO_PINS_PER_BANK,
1491 .of_gpio_n_cells = 1,
1492 .of_xlate = st_gpio_xlate,
1495 static struct irq_chip st_gpio_irqchip = {
1496 .name = "GPIO",
1497 .irq_disable = st_gpio_irq_mask,
1498 .irq_mask = st_gpio_irq_mask,
1499 .irq_unmask = st_gpio_irq_unmask,
1500 .irq_set_type = st_gpio_irq_set_type,
1501 .flags = IRQCHIP_SKIP_SET_WAKE,
1504 static int st_gpiolib_register_bank(struct st_pinctrl *info,
1505 int bank_nr, struct device_node *np)
1507 struct st_gpio_bank *bank = &info->banks[bank_nr];
1508 struct pinctrl_gpio_range *range = &bank->range;
1509 struct device *dev = info->dev;
1510 int bank_num = of_alias_get_id(np, "gpio");
1511 struct resource res, irq_res;
1512 int gpio_irq = 0, err;
1514 if (of_address_to_resource(np, 0, &res))
1515 return -ENODEV;
1517 bank->base = devm_ioremap_resource(dev, &res);
1518 if (IS_ERR(bank->base))
1519 return PTR_ERR(bank->base);
1521 bank->gpio_chip = st_gpio_template;
1522 bank->gpio_chip.base = bank_num * ST_GPIO_PINS_PER_BANK;
1523 bank->gpio_chip.ngpio = ST_GPIO_PINS_PER_BANK;
1524 bank->gpio_chip.of_node = np;
1525 bank->gpio_chip.dev = dev;
1526 spin_lock_init(&bank->lock);
1528 of_property_read_string(np, "st,bank-name", &range->name);
1529 bank->gpio_chip.label = range->name;
1531 range->id = bank_num;
1532 range->pin_base = range->base = range->id * ST_GPIO_PINS_PER_BANK;
1533 range->npins = bank->gpio_chip.ngpio;
1534 range->gc = &bank->gpio_chip;
1535 err = gpiochip_add(&bank->gpio_chip);
1536 if (err) {
1537 dev_err(dev, "Failed to add gpiochip(%d)!\n", bank_num);
1538 return err;
1540 dev_info(dev, "%s bank added.\n", range->name);
1543 * GPIO bank can have one of the two possible types of
1544 * interrupt-wirings.
1546 * First type is via irqmux, single interrupt is used by multiple
1547 * gpio banks. This reduces number of overall interrupts numbers
1548 * required. All these banks belong to a single pincontroller.
1549 * _________
1550 * | |----> [gpio-bank (n) ]
1551 * | |----> [gpio-bank (n + 1)]
1552 * [irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
1553 * | |----> [gpio-bank (... )]
1554 * |_________|----> [gpio-bank (n + 7)]
1556 * Second type has a dedicated interrupt per each gpio bank.
1558 * [irqN]----> [gpio-bank (n)]
1561 if (of_irq_to_resource(np, 0, &irq_res)) {
1562 gpio_irq = irq_res.start;
1563 gpiochip_set_chained_irqchip(&bank->gpio_chip, &st_gpio_irqchip,
1564 gpio_irq, st_gpio_irq_handler);
1567 if (info->irqmux_base || gpio_irq > 0) {
1568 err = gpiochip_irqchip_add(&bank->gpio_chip, &st_gpio_irqchip,
1569 0, handle_simple_irq,
1570 IRQ_TYPE_LEVEL_LOW);
1571 if (err) {
1572 gpiochip_remove(&bank->gpio_chip);
1573 dev_info(dev, "could not add irqchip\n");
1574 return err;
1576 } else {
1577 dev_info(dev, "No IRQ support for %s bank\n", np->full_name);
1580 return 0;
1583 static const struct of_device_id st_pctl_of_match[] = {
1584 { .compatible = "st,stih415-sbc-pinctrl", .data = &stih415_sbc_data },
1585 { .compatible = "st,stih415-rear-pinctrl", .data = &stih415_rear_data },
1586 { .compatible = "st,stih415-left-pinctrl", .data = &stih415_left_data },
1587 { .compatible = "st,stih415-right-pinctrl",
1588 .data = &stih415_right_data },
1589 { .compatible = "st,stih415-front-pinctrl",
1590 .data = &stih415_front_data },
1591 { .compatible = "st,stih416-sbc-pinctrl", .data = &stih416_data},
1592 { .compatible = "st,stih416-front-pinctrl", .data = &stih416_data},
1593 { .compatible = "st,stih416-rear-pinctrl", .data = &stih416_data},
1594 { .compatible = "st,stih416-fvdp-fe-pinctrl", .data = &stih416_data},
1595 { .compatible = "st,stih416-fvdp-lite-pinctrl", .data = &stih416_data},
1596 { .compatible = "st,stih407-sbc-pinctrl", .data = &stih416_data},
1597 { .compatible = "st,stih407-front-pinctrl", .data = &stih416_data},
1598 { .compatible = "st,stih407-rear-pinctrl", .data = &stih416_data},
1599 { .compatible = "st,stih407-flash-pinctrl", .data = &stih407_flashdata},
1600 { /* sentinel */ }
1603 static int st_pctl_probe_dt(struct platform_device *pdev,
1604 struct pinctrl_desc *pctl_desc, struct st_pinctrl *info)
1606 int ret = 0;
1607 int i = 0, j = 0, k = 0, bank;
1608 struct pinctrl_pin_desc *pdesc;
1609 struct device_node *np = pdev->dev.of_node;
1610 struct device_node *child;
1611 int grp_index = 0;
1612 int irq = 0;
1613 struct resource *res;
1615 st_pctl_dt_child_count(info, np);
1616 if (!info->nbanks) {
1617 dev_err(&pdev->dev, "you need atleast one gpio bank\n");
1618 return -EINVAL;
1621 dev_info(&pdev->dev, "nbanks = %d\n", info->nbanks);
1622 dev_info(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
1623 dev_info(&pdev->dev, "ngroups = %d\n", info->ngroups);
1625 info->functions = devm_kzalloc(&pdev->dev,
1626 info->nfunctions * sizeof(*info->functions), GFP_KERNEL);
1628 info->groups = devm_kzalloc(&pdev->dev,
1629 info->ngroups * sizeof(*info->groups) , GFP_KERNEL);
1631 info->banks = devm_kzalloc(&pdev->dev,
1632 info->nbanks * sizeof(*info->banks), GFP_KERNEL);
1634 if (!info->functions || !info->groups || !info->banks)
1635 return -ENOMEM;
1637 info->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
1638 if (IS_ERR(info->regmap)) {
1639 dev_err(info->dev, "No syscfg phandle specified\n");
1640 return PTR_ERR(info->regmap);
1642 info->data = of_match_node(st_pctl_of_match, np)->data;
1644 irq = platform_get_irq(pdev, 0);
1646 if (irq > 0) {
1647 res = platform_get_resource_byname(pdev,
1648 IORESOURCE_MEM, "irqmux");
1649 info->irqmux_base = devm_ioremap_resource(&pdev->dev, res);
1651 if (IS_ERR(info->irqmux_base))
1652 return PTR_ERR(info->irqmux_base);
1654 irq_set_chained_handler_and_data(irq, st_gpio_irqmux_handler,
1655 info);
1659 pctl_desc->npins = info->nbanks * ST_GPIO_PINS_PER_BANK;
1660 pdesc = devm_kzalloc(&pdev->dev,
1661 sizeof(*pdesc) * pctl_desc->npins, GFP_KERNEL);
1662 if (!pdesc)
1663 return -ENOMEM;
1665 pctl_desc->pins = pdesc;
1667 bank = 0;
1668 for_each_child_of_node(np, child) {
1669 if (of_property_read_bool(child, "gpio-controller")) {
1670 const char *bank_name = NULL;
1671 ret = st_gpiolib_register_bank(info, bank, child);
1672 if (ret)
1673 return ret;
1675 k = info->banks[bank].range.pin_base;
1676 bank_name = info->banks[bank].range.name;
1677 for (j = 0; j < ST_GPIO_PINS_PER_BANK; j++, k++) {
1678 pdesc->number = k;
1679 pdesc->name = kasprintf(GFP_KERNEL, "%s[%d]",
1680 bank_name, j);
1681 pdesc++;
1683 st_parse_syscfgs(info, bank, child);
1684 bank++;
1685 } else {
1686 ret = st_pctl_parse_functions(child, info,
1687 i++, &grp_index);
1688 if (ret) {
1689 dev_err(&pdev->dev, "No functions found.\n");
1690 return ret;
1695 return 0;
1698 static int st_pctl_probe(struct platform_device *pdev)
1700 struct st_pinctrl *info;
1701 struct pinctrl_desc *pctl_desc;
1702 int ret, i;
1704 if (!pdev->dev.of_node) {
1705 dev_err(&pdev->dev, "device node not found.\n");
1706 return -EINVAL;
1709 pctl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctl_desc), GFP_KERNEL);
1710 if (!pctl_desc)
1711 return -ENOMEM;
1713 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
1714 if (!info)
1715 return -ENOMEM;
1717 info->dev = &pdev->dev;
1718 platform_set_drvdata(pdev, info);
1719 ret = st_pctl_probe_dt(pdev, pctl_desc, info);
1720 if (ret)
1721 return ret;
1723 pctl_desc->owner = THIS_MODULE;
1724 pctl_desc->pctlops = &st_pctlops;
1725 pctl_desc->pmxops = &st_pmxops;
1726 pctl_desc->confops = &st_confops;
1727 pctl_desc->name = dev_name(&pdev->dev);
1729 info->pctl = pinctrl_register(pctl_desc, &pdev->dev, info);
1730 if (IS_ERR(info->pctl)) {
1731 dev_err(&pdev->dev, "Failed pinctrl registration\n");
1732 return PTR_ERR(info->pctl);
1735 for (i = 0; i < info->nbanks; i++)
1736 pinctrl_add_gpio_range(info->pctl, &info->banks[i].range);
1738 return 0;
1741 static struct platform_driver st_pctl_driver = {
1742 .driver = {
1743 .name = "st-pinctrl",
1744 .of_match_table = st_pctl_of_match,
1746 .probe = st_pctl_probe,
1749 static int __init st_pctl_init(void)
1751 return platform_driver_register(&st_pctl_driver);
1753 arch_initcall(st_pctl_init);