?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
enic: Add new firmware devcmds
[linux/fpc-iii.git] / drivers / net / tlan.c
blobccee3eddc5f4c24b4afcdf6cb4dcaf8759165b7a
1 /*******************************************************************************
2 *
3 * Linux ThunderLAN Driver
4 *
5 * tlan.c
6 * by James Banks
7 *
8 * (C) 1997-1998 Caldera, Inc.
9 * (C) 1998 James Banks
10 * (C) 1999-2001 Torben Mathiasen
11 * (C) 2002 Samuel Chessman
12 *
13 * This software may be used and distributed according to the terms
14 * of the GNU General Public License, incorporated herein by reference.
15 *
16 ** Useful (if not required) reading:
17 *
18 * Texas Instruments, ThunderLAN Programmer's Guide,
19 * TI Literature Number SPWU013A
20 * available in PDF format from www.ti.com
21 * Level One, LXT901 and LXT970 Data Sheets
22 * available in PDF format from www.level1.com
23 * National Semiconductor, DP83840A Data Sheet
24 * available in PDF format from www.national.com
25 * Microchip Technology, 24C01A/02A/04A Data Sheet
26 * available in PDF format from www.microchip.com
27 *
28 * Change History
29 *
30 * Tigran Aivazian <tigran@sco.com>: TLan_PciProbe() now uses
31 * new PCI BIOS interface.
32 * Alan Cox <alan@lxorguk.ukuu.org.uk>:
33 * Fixed the out of memory
34 * handling.
35 *
36 * Torben Mathiasen <torben.mathiasen@compaq.com> New Maintainer!
37 *
38 * v1.1 Dec 20, 1999 - Removed linux version checking
39 * Patch from Tigran Aivazian.
40 * - v1.1 includes Alan's SMP updates.
41 * - We still have problems on SMP though,
42 * but I'm looking into that.
43 *
44 * v1.2 Jan 02, 2000 - Hopefully fixed the SMP deadlock.
45 * - Removed dependency of HZ being 100.
46 * - We now allow higher priority timers to
47 * overwrite timers like TLAN_TIMER_ACTIVITY
48 * Patch from John Cagle <john.cagle@compaq.com>.
49 * - Fixed a few compiler warnings.
50 *
51 * v1.3 Feb 04, 2000 - Fixed the remaining HZ issues.
52 * - Removed call to pci_present().
53 * - Removed SA_INTERRUPT flag from irq handler.
54 * - Added __init and __initdata to reduce resisdent
55 * code size.
56 * - Driver now uses module_init/module_exit.
57 * - Rewrote init_module and tlan_probe to
58 * share a lot more code. We now use tlan_probe
59 * with builtin and module driver.
60 * - Driver ported to new net API.
61 * - tlan.txt has been reworked to reflect current
62 * driver (almost)
63 * - Other minor stuff
64 *
65 * v1.4 Feb 10, 2000 - Updated with more changes required after Dave's
66 * network cleanup in 2.3.43pre7 (Tigran & myself)
67 * - Minor stuff.
68 *
69 * v1.5 March 22, 2000 - Fixed another timer bug that would hang the driver
70 * if no cable/link were present.
71 * - Cosmetic changes.
72 * - TODO: Port completely to new PCI/DMA API
73 * Auto-Neg fallback.
74 *
75 * v1.6 April 04, 2000 - Fixed driver support for kernel-parameters. Haven't
76 * tested it though, as the kernel support is currently
77 * broken (2.3.99p4p3).
78 * - Updated tlan.txt accordingly.
79 * - Adjusted minimum/maximum frame length.
80 * - There is now a TLAN website up at
81 * http://tlan.kernel.dk
82 *
83 * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now
84 * reports PHY information when used with Donald
85 * Beckers userspace MII diagnostics utility.
86 *
87 * v1.8 April 23, 2000 - Fixed support for forced speed/duplex settings.
88 * - Added link information to Auto-Neg and forced
89 * modes. When NIC operates with auto-neg the driver
90 * will report Link speed & duplex modes as well as
91 * link partner abilities. When forced link is used,
92 * the driver will report status of the established
93 * link.
94 * Please read tlan.txt for additional information.
95 * - Removed call to check_region(), and used
96 * return value of request_region() instead.
97 *
98 * v1.8a May 28, 2000 - Minor updates.
99 *
100 * v1.9 July 25, 2000 - Fixed a few remaining Full-Duplex issues.
101 * - Updated with timer fixes from Andrew Morton.
102 * - Fixed module race in TLan_Open.
103 * - Added routine to monitor PHY status.
104 * - Added activity led support for Proliant devices.
105 *
106 * v1.10 Aug 30, 2000 - Added support for EISA based tlan controllers
107 * like the Compaq NetFlex3/E.
108 * - Rewrote tlan_probe to better handle multiple
109 * bus probes. Probing and device setup is now
110 * done through TLan_Probe and TLan_init_one. Actual
111 * hardware probe is done with kernel API and
112 * TLan_EisaProbe.
113 * - Adjusted debug information for probing.
114 * - Fixed bug that would cause general debug information
115 * to be printed after driver removal.
116 * - Added transmit timeout handling.
117 * - Fixed OOM return values in tlan_probe.
118 * - Fixed possible mem leak in tlan_exit
119 * (now tlan_remove_one).
120 * - Fixed timer bug in TLan_phyMonitor.
121 * - This driver version is alpha quality, please
122 * send me any bug issues you may encounter.
123 *
124 * v1.11 Aug 31, 2000 - Do not try to register irq 0 if no irq line was
125 * set for EISA cards.
126 * - Added support for NetFlex3/E with nibble-rate
127 * 10Base-T PHY. This is untestet as I haven't got
128 * one of these cards.
129 * - Fixed timer being added twice.
130 * - Disabled PhyMonitoring by default as this is
131 * work in progress. Define MONITOR to enable it.
132 * - Now we don't display link info with PHYs that
133 * doesn't support it (level1).
134 * - Incresed tx_timeout beacuse of auto-neg.
135 * - Adjusted timers for forced speeds.
136 *
137 * v1.12 Oct 12, 2000 - Minor fixes (memleak, init, etc.)
138 *
139 * v1.13 Nov 28, 2000 - Stop flooding console with auto-neg issues
140 * when link can't be established.
141 * - Added the bbuf option as a kernel parameter.
142 * - Fixed ioaddr probe bug.
143 * - Fixed stupid deadlock with MII interrupts.
144 * - Added support for speed/duplex selection with
145 * multiple nics.
146 * - Added partly fix for TX Channel lockup with
147 * TLAN v1.0 silicon. This needs to be investigated
148 * further.
149 *
150 * v1.14 Dec 16, 2000 - Added support for servicing multiple frames per.
151 * interrupt. Thanks goes to
152 * Adam Keys <adam@ti.com>
153 * Denis Beaudoin <dbeaudoin@ti.com>
154 * for providing the patch.
155 * - Fixed auto-neg output when using multiple
156 * adapters.
157 * - Converted to use new taskq interface.
158 *
159 * v1.14a Jan 6, 2001 - Minor adjustments (spinlocks, etc.)
160 *
161 * Samuel Chessman <chessman@tux.org> New Maintainer!
162 *
163 * v1.15 Apr 4, 2002 - Correct operation when aui=1 to be
164 * 10T half duplex no loopback
165 * Thanks to Gunnar Eikman
166 *
167 * Sakari Ailus <sakari.ailus@iki.fi>:
168 *
169 * v1.15a Dec 15 2008 - Remove bbuf support, it doesn't work anyway.
170 *
171 *******************************************************************************/
172
173 #include <linux/module.h>
174 #include <linux/init.h>
175 #include <linux/ioport.h>
176 #include <linux/eisa.h>
177 #include <linux/pci.h>
178 #include <linux/dma-mapping.h>
179 #include <linux/netdevice.h>
180 #include <linux/etherdevice.h>
181 #include <linux/delay.h>
182 #include <linux/spinlock.h>
183 #include <linux/workqueue.h>
184 #include <linux/mii.h>
185
186 #include "tlan.h"
187
188 typedef u32 (TLanIntVectorFunc)( struct net_device *, u16 );
189
190
191 /* For removing EISA devices */
192 static struct net_device *TLan_Eisa_Devices;
193
194 static int TLanDevicesInstalled;
195
196 /* Set speed, duplex and aui settings */
197 static int aui[MAX_TLAN_BOARDS];
198 static int duplex[MAX_TLAN_BOARDS];
199 static int speed[MAX_TLAN_BOARDS];
200 static int boards_found;
201 module_param_array(aui, int, NULL, 0);
202 module_param_array(duplex, int, NULL, 0);
203 module_param_array(speed, int, NULL, 0);
204 MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
205 MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
206 MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)");
207
208 MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
209 MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
210 MODULE_LICENSE("GPL");
211
212
213 /* Define this to enable Link beat monitoring */
214 #undef MONITOR
215
216 /* Turn on debugging. See Documentation/networking/tlan.txt for details */
217 static int debug;
218 module_param(debug, int, 0);
219 MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
220
221 static const char TLanSignature[] = "TLAN";
222 static const char tlan_banner[] = "ThunderLAN driver v1.15a\n";
223 static int tlan_have_pci;
224 static int tlan_have_eisa;
225
226 static const char *media[] = {
227 "10BaseT-HD ", "10BaseT-FD ","100baseTx-HD ",
228 "100baseTx-FD", "100baseT4", NULL
229 };
230
231 static struct board {
232 const char *deviceLabel;
233 u32 flags;
234 u16 addrOfs;
235 } board_info[] = {
236 { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
237 { "Compaq Netelligent 10/100 TX PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
238 { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
239 { "Compaq NetFlex-3/P",
240 TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
241 { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
242 { "Compaq Netelligent Integrated 10/100 TX UTP",
243 TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
244 { "Compaq Netelligent Dual 10/100 TX PCI UTP", TLAN_ADAPTER_NONE, 0x83 },
245 { "Compaq Netelligent 10/100 TX Embedded UTP", TLAN_ADAPTER_NONE, 0x83 },
246 { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
247 { "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 },
248 { "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
249 { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
250 { "Compaq Netelligent 10 T/2 PCI UTP/Coax", TLAN_ADAPTER_NONE, 0x83 },
251 { "Compaq NetFlex-3/E",
252 TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */
253 TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
254 { "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
255 };
256
257 static DEFINE_PCI_DEVICE_TABLE(tlan_pci_tbl) = {
258 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
259 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
260 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
261 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
262 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
263 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
264 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
265 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
266 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
267 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
268 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
269 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
270 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
271 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
272 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
273 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
274 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
275 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
276 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
277 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
278 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
279 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
280 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
281 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
282 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
283 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
284 { 0,}
285 };
286 MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);
287
288 static void TLan_EisaProbe( void );
289 static void TLan_Eisa_Cleanup( void );
290 static int TLan_Init( struct net_device * );
291 static int TLan_Open( struct net_device *dev );
292 static netdev_tx_t TLan_StartTx( struct sk_buff *, struct net_device *);
293 static irqreturn_t TLan_HandleInterrupt( int, void *);
294 static int TLan_Close( struct net_device *);
295 static struct net_device_stats *TLan_GetStats( struct net_device *);
296 static void TLan_SetMulticastList( struct net_device *);
297 static int TLan_ioctl( struct net_device *dev, struct ifreq *rq, int cmd);
298 static int TLan_probe1( struct pci_dev *pdev, long ioaddr,
299 int irq, int rev, const struct pci_device_id *ent);
300 static void TLan_tx_timeout( struct net_device *dev);
301 static void TLan_tx_timeout_work(struct work_struct *work);
302 static int tlan_init_one( struct pci_dev *pdev, const struct pci_device_id *ent);
303
304 static u32 TLan_HandleTxEOF( struct net_device *, u16 );
305 static u32 TLan_HandleStatOverflow( struct net_device *, u16 );
306 static u32 TLan_HandleRxEOF( struct net_device *, u16 );
307 static u32 TLan_HandleDummy( struct net_device *, u16 );
308 static u32 TLan_HandleTxEOC( struct net_device *, u16 );
309 static u32 TLan_HandleStatusCheck( struct net_device *, u16 );
310 static u32 TLan_HandleRxEOC( struct net_device *, u16 );
311
312 static void TLan_Timer( unsigned long );
313
314 static void TLan_ResetLists( struct net_device * );
315 static void TLan_FreeLists( struct net_device * );
316 static void TLan_PrintDio( u16 );
317 static void TLan_PrintList( TLanList *, char *, int );
318 static void TLan_ReadAndClearStats( struct net_device *, int );
319 static void TLan_ResetAdapter( struct net_device * );
320 static void TLan_FinishReset( struct net_device * );
321 static void TLan_SetMac( struct net_device *, int areg, char *mac );
322
323 static void TLan_PhyPrint( struct net_device * );
324 static void TLan_PhyDetect( struct net_device * );
325 static void TLan_PhyPowerDown( struct net_device * );
326 static void TLan_PhyPowerUp( struct net_device * );
327 static void TLan_PhyReset( struct net_device * );
328 static void TLan_PhyStartLink( struct net_device * );
329 static void TLan_PhyFinishAutoNeg( struct net_device * );
330 #ifdef MONITOR
331 static void TLan_PhyMonitor( struct net_device * );
332 #endif
333
334 /*
335 static int TLan_PhyNop( struct net_device * );
336 static int TLan_PhyInternalCheck( struct net_device * );
337 static int TLan_PhyInternalService( struct net_device * );
338 static int TLan_PhyDp83840aCheck( struct net_device * );
339 */
340
341 static bool TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
342 static void TLan_MiiSendData( u16, u32, unsigned );
343 static void TLan_MiiSync( u16 );
344 static void TLan_MiiWriteReg( struct net_device *, u16, u16, u16 );
345
346 static void TLan_EeSendStart( u16 );
347 static int TLan_EeSendByte( u16, u8, int );
348 static void TLan_EeReceiveByte( u16, u8 *, int );
349 static int TLan_EeReadByte( struct net_device *, u8, u8 * );
350
351
352 static inline void
353 TLan_StoreSKB( struct tlan_list_tag *tag, struct sk_buff *skb)
354 {
355 unsigned long addr = (unsigned long)skb;
356 tag->buffer[9].address = addr;
357 tag->buffer[8].address = upper_32_bits(addr);
358 }
359
360 static inline struct sk_buff *
361 TLan_GetSKB( const struct tlan_list_tag *tag)
362 {
363 unsigned long addr;
364
365 addr = tag->buffer[9].address;
366 addr |= (tag->buffer[8].address << 16) << 16;
367 return (struct sk_buff *) addr;
368 }
369
370
371 static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
372 NULL,
373 TLan_HandleTxEOF,
374 TLan_HandleStatOverflow,
375 TLan_HandleRxEOF,
376 TLan_HandleDummy,
377 TLan_HandleTxEOC,
378 TLan_HandleStatusCheck,
379 TLan_HandleRxEOC
380 };
381
382 static inline void
383 TLan_SetTimer( struct net_device *dev, u32 ticks, u32 type )
384 {
385 TLanPrivateInfo *priv = netdev_priv(dev);
386 unsigned long flags = 0;
387
388 if (!in_irq())
389 spin_lock_irqsave(&priv->lock, flags);
390 if ( priv->timer.function != NULL &&
391 priv->timerType != TLAN_TIMER_ACTIVITY ) {
392 if (!in_irq())
393 spin_unlock_irqrestore(&priv->lock, flags);
394 return;
395 }
396 priv->timer.function = &TLan_Timer;
397 if (!in_irq())
398 spin_unlock_irqrestore(&priv->lock, flags);
399
400 priv->timer.data = (unsigned long) dev;
401 priv->timerSetAt = jiffies;
402 priv->timerType = type;
403 mod_timer(&priv->timer, jiffies + ticks);
404
405 } /* TLan_SetTimer */
406
407
408 /*****************************************************************************
409 ******************************************************************************
410
411 ThunderLAN Driver Primary Functions
412
413 These functions are more or less common to all Linux network drivers.
414
415 ******************************************************************************
416 *****************************************************************************/
417
418
419
420
421
422 /***************************************************************
423 * tlan_remove_one
424 *
425 * Returns:
426 * Nothing
427 * Parms:
428 * None
429 *
430 * Goes through the TLanDevices list and frees the device
431 * structs and memory associated with each device (lists
432 * and buffers). It also ureserves the IO port regions
433 * associated with this device.
434 *
435 **************************************************************/
436
437
438 static void __devexit tlan_remove_one( struct pci_dev *pdev)
439 {
440 struct net_device *dev = pci_get_drvdata( pdev );
441 TLanPrivateInfo *priv = netdev_priv(dev);
442
443 unregister_netdev( dev );
444
445 if ( priv->dmaStorage ) {
446 pci_free_consistent(priv->pciDev,
447 priv->dmaSize, priv->dmaStorage,
448 priv->dmaStorageDMA );
449 }
450
451 #ifdef CONFIG_PCI
452 pci_release_regions(pdev);
453 #endif
454
455 free_netdev( dev );
456
457 pci_set_drvdata( pdev, NULL );
458 }
459
460 static struct pci_driver tlan_driver = {
461 .name = "tlan",
462 .id_table = tlan_pci_tbl,
463 .probe = tlan_init_one,
464 .remove = __devexit_p(tlan_remove_one),
465 };
466
467 static int __init tlan_probe(void)
468 {
469 int rc = -ENODEV;
470
471 printk(KERN_INFO "%s", tlan_banner);
472
473 TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
474
475 /* Use new style PCI probing. Now the kernel will
476 do most of this for us */
477 rc = pci_register_driver(&tlan_driver);
478
479 if (rc != 0) {
480 printk(KERN_ERR "TLAN: Could not register pci driver.\n");
481 goto err_out_pci_free;
482 }
483
484 TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
485 TLan_EisaProbe();
486
487 printk(KERN_INFO "TLAN: %d device%s installed, PCI: %d EISA: %d\n",
488 TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s",
489 tlan_have_pci, tlan_have_eisa);
490
491 if (TLanDevicesInstalled == 0) {
492 rc = -ENODEV;
493 goto err_out_pci_unreg;
494 }
495 return 0;
496
497 err_out_pci_unreg:
498 pci_unregister_driver(&tlan_driver);
499 err_out_pci_free:
500 return rc;
501 }
502
503
504 static int __devinit tlan_init_one( struct pci_dev *pdev,
505 const struct pci_device_id *ent)
506 {
507 return TLan_probe1( pdev, -1, -1, 0, ent);
508 }
509
510
511 /*
512 ***************************************************************
513 * tlan_probe1
514 *
515 * Returns:
516 * 0 on success, error code on error
517 * Parms:
518 * none
519 *
520 * The name is lower case to fit in with all the rest of
521 * the netcard_probe names. This function looks for
522 * another TLan based adapter, setting it up with the
523 * allocated device struct if one is found.
524 * tlan_probe has been ported to the new net API and
525 * now allocates its own device structure. This function
526 * is also used by modules.
527 *
528 **************************************************************/
529
530 static int __devinit TLan_probe1(struct pci_dev *pdev,
531 long ioaddr, int irq, int rev,
532 const struct pci_device_id *ent )
533 {
534
535 struct net_device *dev;
536 TLanPrivateInfo *priv;
537 u16 device_id;
538 int reg, rc = -ENODEV;
539
540 #ifdef CONFIG_PCI
541 if (pdev) {
542 rc = pci_enable_device(pdev);
543 if (rc)
544 return rc;
545
546 rc = pci_request_regions(pdev, TLanSignature);
547 if (rc) {
548 printk(KERN_ERR "TLAN: Could not reserve IO regions\n");
549 goto err_out;
550 }
551 }
552 #endif /* CONFIG_PCI */
553
554 dev = alloc_etherdev(sizeof(TLanPrivateInfo));
555 if (dev == NULL) {
556 printk(KERN_ERR "TLAN: Could not allocate memory for device.\n");
557 rc = -ENOMEM;
558 goto err_out_regions;
559 }
560 SET_NETDEV_DEV(dev, &pdev->dev);
561
562 priv = netdev_priv(dev);
563
564 priv->pciDev = pdev;
565 priv->dev = dev;
566
567 /* Is this a PCI device? */
568 if (pdev) {
569 u32 pci_io_base = 0;
570
571 priv->adapter = &board_info[ent->driver_data];
572
573 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
574 if (rc) {
575 printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
576 goto err_out_free_dev;
577 }
578
579 for ( reg= 0; reg <= 5; reg ++ ) {
580 if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
581 pci_io_base = pci_resource_start(pdev, reg);
582 TLAN_DBG( TLAN_DEBUG_GNRL, "IO mapping is available at %x.\n",
583 pci_io_base);
584 break;
585 }
586 }
587 if (!pci_io_base) {
588 printk(KERN_ERR "TLAN: No IO mappings available\n");
589 rc = -EIO;
590 goto err_out_free_dev;
591 }
592
593 dev->base_addr = pci_io_base;
594 dev->irq = pdev->irq;
595 priv->adapterRev = pdev->revision;
596 pci_set_master(pdev);
597 pci_set_drvdata(pdev, dev);
598
599 } else { /* EISA card */
600 /* This is a hack. We need to know which board structure
601 * is suited for this adapter */
602 device_id = inw(ioaddr + EISA_ID2);
603 priv->is_eisa = 1;
604 if (device_id == 0x20F1) {
605 priv->adapter = &board_info[13]; /* NetFlex-3/E */
606 priv->adapterRev = 23; /* TLAN 2.3 */
607 } else {
608 priv->adapter = &board_info[14];
609 priv->adapterRev = 10; /* TLAN 1.0 */
610 }
611 dev->base_addr = ioaddr;
612 dev->irq = irq;
613 }
614
615 /* Kernel parameters */
616 if (dev->mem_start) {
617 priv->aui = dev->mem_start & 0x01;
618 priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0
619 : (dev->mem_start & 0x06) >> 1;
620 priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0
621 : (dev->mem_start & 0x18) >> 3;
622
623 if (priv->speed == 0x1) {
624 priv->speed = TLAN_SPEED_10;
625 } else if (priv->speed == 0x2) {
626 priv->speed = TLAN_SPEED_100;
627 }
628 debug = priv->debug = dev->mem_end;
629 } else {
630 priv->aui = aui[boards_found];
631 priv->speed = speed[boards_found];
632 priv->duplex = duplex[boards_found];
633 priv->debug = debug;
634 }
635
636 /* This will be used when we get an adapter error from
637 * within our irq handler */
638 INIT_WORK(&priv->tlan_tqueue, TLan_tx_timeout_work);
639
640 spin_lock_init(&priv->lock);
641
642 rc = TLan_Init(dev);
643 if (rc) {
644 printk(KERN_ERR "TLAN: Could not set up device.\n");
645 goto err_out_free_dev;
646 }
647
648 rc = register_netdev(dev);
649 if (rc) {
650 printk(KERN_ERR "TLAN: Could not register device.\n");
651 goto err_out_uninit;
652 }
653
654
655 TLanDevicesInstalled++;
656 boards_found++;
657
658 /* pdev is NULL if this is an EISA device */
659 if (pdev)
660 tlan_have_pci++;
661 else {
662 priv->nextDevice = TLan_Eisa_Devices;
663 TLan_Eisa_Devices = dev;
664 tlan_have_eisa++;
665 }
666
667 printk(KERN_INFO "TLAN: %s irq=%2d, io=%04x, %s, Rev. %d\n",
668 dev->name,
669 (int) dev->irq,
670 (int) dev->base_addr,
671 priv->adapter->deviceLabel,
672 priv->adapterRev);
673 return 0;
674
675 err_out_uninit:
676 pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage,
677 priv->dmaStorageDMA );
678 err_out_free_dev:
679 free_netdev(dev);
680 err_out_regions:
681 #ifdef CONFIG_PCI
682 if (pdev)
683 pci_release_regions(pdev);
684 #endif
685 err_out:
686 if (pdev)
687 pci_disable_device(pdev);
688 return rc;
689 }
690
691
692 static void TLan_Eisa_Cleanup(void)
693 {
694 struct net_device *dev;
695 TLanPrivateInfo *priv;
696
697 while( tlan_have_eisa ) {
698 dev = TLan_Eisa_Devices;
699 priv = netdev_priv(dev);
700 if (priv->dmaStorage) {
701 pci_free_consistent(priv->pciDev, priv->dmaSize,
702 priv->dmaStorage, priv->dmaStorageDMA );
703 }
704 release_region( dev->base_addr, 0x10);
705 unregister_netdev( dev );
706 TLan_Eisa_Devices = priv->nextDevice;
707 free_netdev( dev );
708 tlan_have_eisa--;
709 }
710 }
711
712
713 static void __exit tlan_exit(void)
714 {
715 pci_unregister_driver(&tlan_driver);
716
717 if (tlan_have_eisa)
718 TLan_Eisa_Cleanup();
719
720 }
721
722
723 /* Module loading/unloading */
724 module_init(tlan_probe);
725 module_exit(tlan_exit);
726
727
728
729 /**************************************************************
730 * TLan_EisaProbe
731 *
732 * Returns: 0 on success, 1 otherwise
733 *
734 * Parms: None
735 *
736 *
737 * This functions probes for EISA devices and calls
738 * TLan_probe1 when one is found.
739 *
740 *************************************************************/
741
742 static void __init TLan_EisaProbe (void)
743 {
744 long ioaddr;
745 int rc = -ENODEV;
746 int irq;
747 u16 device_id;
748
749 if (!EISA_bus) {
750 TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
751 return;
752 }
753
754 /* Loop through all slots of the EISA bus */
755 for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
756
757 TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n",
758 (int) ioaddr + 0xC80, inw(ioaddr + EISA_ID));
759 TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n",
760 (int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2));
761
762
763 TLAN_DBG(TLAN_DEBUG_PROBE, "Probing for EISA adapter at IO: 0x%4x : ",
764 (int) ioaddr);
765 if (request_region(ioaddr, 0x10, TLanSignature) == NULL)
766 goto out;
767
768 if (inw(ioaddr + EISA_ID) != 0x110E) {
769 release_region(ioaddr, 0x10);
770 goto out;
771 }
772
773 device_id = inw(ioaddr + EISA_ID2);
774 if (device_id != 0x20F1 && device_id != 0x40F1) {
775 release_region (ioaddr, 0x10);
776 goto out;
777 }
778
779 if (inb(ioaddr + EISA_CR) != 0x1) { /* Check if adapter is enabled */
780 release_region (ioaddr, 0x10);
781 goto out2;
782 }
783
784 if (debug == 0x10)
785 printk("Found one\n");
786
787
788 /* Get irq from board */
789 switch (inb(ioaddr + 0xCC0)) {
790 case(0x10):
791 irq=5;
792 break;
793 case(0x20):
794 irq=9;
795 break;
796 case(0x40):
797 irq=10;
798 break;
799 case(0x80):
800 irq=11;
801 break;
802 default:
803 goto out;
804 }
805
806
807 /* Setup the newly found eisa adapter */
808 rc = TLan_probe1( NULL, ioaddr, irq,
809 12, NULL);
810 continue;
811
812 out:
813 if (debug == 0x10)
814 printk("None found\n");
815 continue;
816
817 out2: if (debug == 0x10)
818 printk("Card found but it is not enabled, skipping\n");
819 continue;
820
821 }
822
823 } /* TLan_EisaProbe */
824
825 #ifdef CONFIG_NET_POLL_CONTROLLER
826 static void TLan_Poll(struct net_device *dev)
827 {
828 disable_irq(dev->irq);
829 TLan_HandleInterrupt(dev->irq, dev);
830 enable_irq(dev->irq);
831 }
832 #endif
833
834 static const struct net_device_ops TLan_netdev_ops = {
835 .ndo_open = TLan_Open,
836 .ndo_stop = TLan_Close,
837 .ndo_start_xmit = TLan_StartTx,
838 .ndo_tx_timeout = TLan_tx_timeout,
839 .ndo_get_stats = TLan_GetStats,
840 .ndo_set_multicast_list = TLan_SetMulticastList,
841 .ndo_do_ioctl = TLan_ioctl,
842 .ndo_change_mtu = eth_change_mtu,
843 .ndo_set_mac_address = eth_mac_addr,
844 .ndo_validate_addr = eth_validate_addr,
845 #ifdef CONFIG_NET_POLL_CONTROLLER
846 .ndo_poll_controller = TLan_Poll,
847 #endif
848 };
849
850
851
852 /***************************************************************
853 * TLan_Init
854 *
855 * Returns:
856 * 0 on success, error code otherwise.
857 * Parms:
858 * dev The structure of the device to be
859 * init'ed.
860 *
861 * This function completes the initialization of the
862 * device structure and driver. It reserves the IO
863 * addresses, allocates memory for the lists and bounce
864 * buffers, retrieves the MAC address from the eeprom
865 * and assignes the device's methods.
866 *
867 **************************************************************/
868
869 static int TLan_Init( struct net_device *dev )
870 {
871 int dma_size;
872 int err;
873 int i;
874 TLanPrivateInfo *priv;
875
876 priv = netdev_priv(dev);
877
878 dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
879 * ( sizeof(TLanList) );
880 priv->dmaStorage = pci_alloc_consistent(priv->pciDev,
881 dma_size, &priv->dmaStorageDMA);
882 priv->dmaSize = dma_size;
883
884 if ( priv->dmaStorage == NULL ) {
885 printk(KERN_ERR "TLAN: Could not allocate lists and buffers for %s.\n",
886 dev->name );
887 return -ENOMEM;
888 }
889 memset( priv->dmaStorage, 0, dma_size );
890 priv->rxList = (TLanList *) ALIGN((unsigned long)priv->dmaStorage, 8);
891 priv->rxListDMA = ALIGN(priv->dmaStorageDMA, 8);
892 priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
893 priv->txListDMA = priv->rxListDMA + sizeof(TLanList) * TLAN_NUM_RX_LISTS;
894
895 err = 0;
896 for ( i = 0; i < 6 ; i++ )
897 err |= TLan_EeReadByte( dev,
898 (u8) priv->adapter->addrOfs + i,
899 (u8 *) &dev->dev_addr[i] );
900 if ( err ) {
901 printk(KERN_ERR "TLAN: %s: Error reading MAC from eeprom: %d\n",
902 dev->name,
903 err );
904 }
905 dev->addr_len = 6;
906
907 netif_carrier_off(dev);
908
909 /* Device methods */
910 dev->netdev_ops = &TLan_netdev_ops;
911 dev->watchdog_timeo = TX_TIMEOUT;
912
913 return 0;
914
915 } /* TLan_Init */
916
917
918
919
920 /***************************************************************
921 * TLan_Open
922 *
923 * Returns:
924 * 0 on success, error code otherwise.
925 * Parms:
926 * dev Structure of device to be opened.
927 *
928 * This routine puts the driver and TLAN adapter in a
929 * state where it is ready to send and receive packets.
930 * It allocates the IRQ, resets and brings the adapter
931 * out of reset, and allows interrupts. It also delays
932 * the startup for autonegotiation or sends a Rx GO
933 * command to the adapter, as appropriate.
934 *
935 **************************************************************/
936
937 static int TLan_Open( struct net_device *dev )
938 {
939 TLanPrivateInfo *priv = netdev_priv(dev);
940 int err;
941
942 priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
943 err = request_irq( dev->irq, TLan_HandleInterrupt, IRQF_SHARED,
944 dev->name, dev );
945
946 if ( err ) {
947 pr_err("TLAN: Cannot open %s because IRQ %d is already in use.\n",
948 dev->name, dev->irq );
949 return err;
950 }
951
952 init_timer(&priv->timer);
953 netif_start_queue(dev);
954
955 /* NOTE: It might not be necessary to read the stats before a
956 reset if you don't care what the values are.
957 */
958 TLan_ResetLists( dev );
959 TLan_ReadAndClearStats( dev, TLAN_IGNORE );
960 TLan_ResetAdapter( dev );
961
962 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n",
963 dev->name, priv->tlanRev );
964
965 return 0;
966
967 } /* TLan_Open */
968
969
970
971 /**************************************************************
972 * TLan_ioctl
973 *
974 * Returns:
975 * 0 on success, error code otherwise
976 * Params:
977 * dev structure of device to receive ioctl.
978 *
979 * rq ifreq structure to hold userspace data.
980 *
981 * cmd ioctl command.
982 *
983 *
984 *************************************************************/
985
986 static int TLan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
987 {
988 TLanPrivateInfo *priv = netdev_priv(dev);
989 struct mii_ioctl_data *data = if_mii(rq);
990 u32 phy = priv->phy[priv->phyNum];
991
992 if (!priv->phyOnline)
993 return -EAGAIN;
994
995 switch(cmd) {
996 case SIOCGMIIPHY: /* Get address of MII PHY in use. */
997 data->phy_id = phy;
998
999
1000 case SIOCGMIIREG: /* Read MII PHY register. */
1001 TLan_MiiReadReg(dev, data->phy_id & 0x1f,
1002 data->reg_num & 0x1f, &data->val_out);
1003 return 0;
1004
1005
1006 case SIOCSMIIREG: /* Write MII PHY register. */
1007 TLan_MiiWriteReg(dev, data->phy_id & 0x1f,
1008 data->reg_num & 0x1f, data->val_in);
1009 return 0;
1010 default:
1011 return -EOPNOTSUPP;
1012 }
1013 } /* tlan_ioctl */
1014
1015
1016 /***************************************************************
1017 * TLan_tx_timeout
1018 *
1019 * Returns: nothing
1020 *
1021 * Params:
1022 * dev structure of device which timed out
1023 * during transmit.
1024 *
1025 **************************************************************/
1026
1027 static void TLan_tx_timeout(struct net_device *dev)
1028 {
1029
1030 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
1031
1032 /* Ok so we timed out, lets see what we can do about it...*/
1033 TLan_FreeLists( dev );
1034 TLan_ResetLists( dev );
1035 TLan_ReadAndClearStats( dev, TLAN_IGNORE );
1036 TLan_ResetAdapter( dev );
1037 dev->trans_start = jiffies; /* prevent tx timeout */
1038 netif_wake_queue( dev );
1039
1040 }
1041
1042
1043 /***************************************************************
1044 * TLan_tx_timeout_work
1045 *
1046 * Returns: nothing
1047 *
1048 * Params:
1049 * work work item of device which timed out
1050 *
1051 **************************************************************/
1052
1053 static void TLan_tx_timeout_work(struct work_struct *work)
1054 {
1055 TLanPrivateInfo *priv =
1056 container_of(work, TLanPrivateInfo, tlan_tqueue);
1057
1058 TLan_tx_timeout(priv->dev);
1059 }
1060
1061
1062
1063 /***************************************************************
1064 * TLan_StartTx
1065 *
1066 * Returns:
1067 * 0 on success, non-zero on failure.
1068 * Parms:
1069 * skb A pointer to the sk_buff containing the
1070 * frame to be sent.
1071 * dev The device to send the data on.
1072 *
1073 * This function adds a frame to the Tx list to be sent
1074 * ASAP. First it verifies that the adapter is ready and
1075 * there is room in the queue. Then it sets up the next
1076 * available list, copies the frame to the corresponding
1077 * buffer. If the adapter Tx channel is idle, it gives
1078 * the adapter a Tx Go command on the list, otherwise it
1079 * sets the forward address of the previous list to point
1080 * to this one. Then it frees the sk_buff.
1081 *
1082 **************************************************************/
1083
1084 static netdev_tx_t TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
1085 {
1086 TLanPrivateInfo *priv = netdev_priv(dev);
1087 dma_addr_t tail_list_phys;
1088 TLanList *tail_list;
1089 unsigned long flags;
1090 unsigned int txlen;
1091
1092 if ( ! priv->phyOnline ) {
1093 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n",
1094 dev->name );
1095 dev_kfree_skb_any(skb);
1096 return NETDEV_TX_OK;
1097 }
1098
1099 if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
1100 return NETDEV_TX_OK;
1101 txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
1102
1103 tail_list = priv->txList + priv->txTail;
1104 tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
1105
1106 if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
1107 TLAN_DBG( TLAN_DEBUG_TX,
1108 "TRANSMIT: %s is busy (Head=%d Tail=%d)\n",
1109 dev->name, priv->txHead, priv->txTail );
1110 netif_stop_queue(dev);
1111 priv->txBusyCount++;
1112 return NETDEV_TX_BUSY;
1113 }
1114
1115 tail_list->forward = 0;
1116
1117 tail_list->buffer[0].address = pci_map_single(priv->pciDev,
1118 skb->data, txlen,
1119 PCI_DMA_TODEVICE);
1120 TLan_StoreSKB(tail_list, skb);
1121
1122 tail_list->frameSize = (u16) txlen;
1123 tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
1124 tail_list->buffer[1].count = 0;
1125 tail_list->buffer[1].address = 0;
1126
1127 spin_lock_irqsave(&priv->lock, flags);
1128 tail_list->cStat = TLAN_CSTAT_READY;
1129 if ( ! priv->txInProgress ) {
1130 priv->txInProgress = 1;
1131 TLAN_DBG( TLAN_DEBUG_TX,
1132 "TRANSMIT: Starting TX on buffer %d\n", priv->txTail );
1133 outl( tail_list_phys, dev->base_addr + TLAN_CH_PARM );
1134 outl( TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD );
1135 } else {
1136 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Adding buffer %d to TX channel\n",
1137 priv->txTail );
1138 if ( priv->txTail == 0 ) {
1139 ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward
1140 = tail_list_phys;
1141 } else {
1142 ( priv->txList + ( priv->txTail - 1 ) )->forward
1143 = tail_list_phys;
1144 }
1145 }
1146 spin_unlock_irqrestore(&priv->lock, flags);
1147
1148 CIRC_INC( priv->txTail, TLAN_NUM_TX_LISTS );
1149
1150 return NETDEV_TX_OK;
1151
1152 } /* TLan_StartTx */
1153
1154
1155
1156
1157 /***************************************************************
1158 * TLan_HandleInterrupt
1159 *
1160 * Returns:
1161 * Nothing
1162 * Parms:
1163 * irq The line on which the interrupt
1164 * occurred.
1165 * dev_id A pointer to the device assigned to
1166 * this irq line.
1167 *
1168 * This function handles an interrupt generated by its
1169 * assigned TLAN adapter. The function deactivates
1170 * interrupts on its adapter, records the type of
1171 * interrupt, executes the appropriate subhandler, and
1172 * acknowdges the interrupt to the adapter (thus
1173 * re-enabling adapter interrupts.
1174 *
1175 **************************************************************/
1176
1177 static irqreturn_t TLan_HandleInterrupt(int irq, void *dev_id)
1178 {
1179 struct net_device *dev = dev_id;
1180 TLanPrivateInfo *priv = netdev_priv(dev);
1181 u16 host_int;
1182 u16 type;
1183
1184 spin_lock(&priv->lock);
1185
1186 host_int = inw( dev->base_addr + TLAN_HOST_INT );
1187 type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
1188 if ( type ) {
1189 u32 ack;
1190 u32 host_cmd;
1191
1192 outw( host_int, dev->base_addr + TLAN_HOST_INT );
1193 ack = TLanIntVector[type]( dev, host_int );
1194
1195 if ( ack ) {
1196 host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
1197 outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
1198 }
1199 }
1200
1201 spin_unlock(&priv->lock);
1202
1203 return IRQ_RETVAL(type);
1204 } /* TLan_HandleInterrupts */
1205
1206
1207
1208
1209 /***************************************************************
1210 * TLan_Close
1211 *
1212 * Returns:
1213 * An error code.
1214 * Parms:
1215 * dev The device structure of the device to
1216 * close.
1217 *
1218 * This function shuts down the adapter. It records any
1219 * stats, puts the adapter into reset state, deactivates
1220 * its time as needed, and frees the irq it is using.
1221 *
1222 **************************************************************/
1223
1224 static int TLan_Close(struct net_device *dev)
1225 {
1226 TLanPrivateInfo *priv = netdev_priv(dev);
1227
1228 netif_stop_queue(dev);
1229 priv->neg_be_verbose = 0;
1230
1231 TLan_ReadAndClearStats( dev, TLAN_RECORD );
1232 outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
1233 if ( priv->timer.function != NULL ) {
1234 del_timer_sync( &priv->timer );
1235 priv->timer.function = NULL;
1236 }
1237
1238 free_irq( dev->irq, dev );
1239 TLan_FreeLists( dev );
1240 TLAN_DBG( TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name );
1241
1242 return 0;
1243
1244 } /* TLan_Close */
1245
1246
1247
1248
1249 /***************************************************************
1250 * TLan_GetStats
1251 *
1252 * Returns:
1253 * A pointer to the device's statistics structure.
1254 * Parms:
1255 * dev The device structure to return the
1256 * stats for.
1257 *
1258 * This function updates the devices statistics by reading
1259 * the TLAN chip's onboard registers. Then it returns the
1260 * address of the statistics structure.
1261 *
1262 **************************************************************/
1263
1264 static struct net_device_stats *TLan_GetStats( struct net_device *dev )
1265 {
1266 TLanPrivateInfo *priv = netdev_priv(dev);
1267 int i;
1268
1269 /* Should only read stats if open ? */
1270 TLan_ReadAndClearStats( dev, TLAN_RECORD );
1271
1272 TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name,
1273 priv->rxEocCount );
1274 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name,
1275 priv->txBusyCount );
1276 if ( debug & TLAN_DEBUG_GNRL ) {
1277 TLan_PrintDio( dev->base_addr );
1278 TLan_PhyPrint( dev );
1279 }
1280 if ( debug & TLAN_DEBUG_LIST ) {
1281 for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ )
1282 TLan_PrintList( priv->rxList + i, "RX", i );
1283 for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ )
1284 TLan_PrintList( priv->txList + i, "TX", i );
1285 }
1286
1287 return &dev->stats;
1288
1289 } /* TLan_GetStats */
1290
1291
1292
1293
1294 /***************************************************************
1295 * TLan_SetMulticastList
1296 *
1297 * Returns:
1298 * Nothing
1299 * Parms:
1300 * dev The device structure to set the
1301 * multicast list for.
1302 *
1303 * This function sets the TLAN adaptor to various receive
1304 * modes. If the IFF_PROMISC flag is set, promiscuous
1305 * mode is acitviated. Otherwise, promiscuous mode is
1306 * turned off. If the IFF_ALLMULTI flag is set, then
1307 * the hash table is set to receive all group addresses.
1308 * Otherwise, the first three multicast addresses are
1309 * stored in AREG_1-3, and the rest are selected via the
1310 * hash table, as necessary.
1311 *
1312 **************************************************************/
1313
1314 static void TLan_SetMulticastList( struct net_device *dev )
1315 {
1316 struct netdev_hw_addr *ha;
1317 u32 hash1 = 0;
1318 u32 hash2 = 0;
1319 int i;
1320 u32 offset;
1321 u8 tmp;
1322
1323 if ( dev->flags & IFF_PROMISC ) {
1324 tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
1325 TLan_DioWrite8( dev->base_addr,
1326 TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
1327 } else {
1328 tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
1329 TLan_DioWrite8( dev->base_addr,
1330 TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
1331 if ( dev->flags & IFF_ALLMULTI ) {
1332 for ( i = 0; i < 3; i++ )
1333 TLan_SetMac( dev, i + 1, NULL );
1334 TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
1335 TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
1336 } else {
1337 i = 0;
1338 netdev_for_each_mc_addr(ha, dev) {
1339 if ( i < 3 ) {
1340 TLan_SetMac( dev, i + 1,
1341 (char *) &ha->addr);
1342 } else {
1343 offset = TLan_HashFunc((u8 *)&ha->addr);
1344 if ( offset < 32 )
1345 hash1 |= ( 1 << offset );
1346 else
1347 hash2 |= ( 1 << ( offset - 32 ) );
1348 }
1349 i++;
1350 }
1351 for ( ; i < 3; i++ )
1352 TLan_SetMac( dev, i + 1, NULL );
1353 TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 );
1354 TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 );
1355 }
1356 }
1357
1358 } /* TLan_SetMulticastList */
1359
1360
1361
1362 /*****************************************************************************
1363 ******************************************************************************
1364
1365 ThunderLAN Driver Interrupt Vectors and Table
1366
1367 Please see Chap. 4, "Interrupt Handling" of the "ThunderLAN
1368 Programmer's Guide" for more informations on handling interrupts
1369 generated by TLAN based adapters.
1370
1371 ******************************************************************************
1372 *****************************************************************************/
1373
1374
1375
1376
1377 /***************************************************************
1378 * TLan_HandleTxEOF
1379 *
1380 * Returns:
1381 * 1
1382 * Parms:
1383 * dev Device assigned the IRQ that was
1384 * raised.
1385 * host_int The contents of the HOST_INT
1386 * port.
1387 *
1388 * This function handles Tx EOF interrupts which are raised
1389 * by the adapter when it has completed sending the
1390 * contents of a buffer. If detemines which list/buffer
1391 * was completed and resets it. If the buffer was the last
1392 * in the channel (EOC), then the function checks to see if
1393 * another buffer is ready to send, and if so, sends a Tx
1394 * Go command. Finally, the driver activates/continues the
1395 * activity LED.
1396 *
1397 **************************************************************/
1398
1399 static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
1400 {
1401 TLanPrivateInfo *priv = netdev_priv(dev);
1402 int eoc = 0;
1403 TLanList *head_list;
1404 dma_addr_t head_list_phys;
1405 u32 ack = 0;
1406 u16 tmpCStat;
1407
1408 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n",
1409 priv->txHead, priv->txTail );
1410 head_list = priv->txList + priv->txHead;
1411
1412 while (((tmpCStat = head_list->cStat ) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
1413 struct sk_buff *skb = TLan_GetSKB(head_list);
1414
1415 ack++;
1416 pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
1417 max(skb->len,
1418 (unsigned int)TLAN_MIN_FRAME_SIZE),
1419 PCI_DMA_TODEVICE);
1420 dev_kfree_skb_any(skb);
1421 head_list->buffer[8].address = 0;
1422 head_list->buffer[9].address = 0;
1423
1424 if ( tmpCStat & TLAN_CSTAT_EOC )
1425 eoc = 1;
1426
1427 dev->stats.tx_bytes += head_list->frameSize;
1428
1429 head_list->cStat = TLAN_CSTAT_UNUSED;
1430 netif_start_queue(dev);
1431 CIRC_INC( priv->txHead, TLAN_NUM_TX_LISTS );
1432 head_list = priv->txList + priv->txHead;
1433 }
1434
1435 if (!ack)
1436 printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n");
1437
1438 if ( eoc ) {
1439 TLAN_DBG( TLAN_DEBUG_TX,
1440 "TRANSMIT: Handling TX EOC (Head=%d Tail=%d)\n",
1441 priv->txHead, priv->txTail );
1442 head_list = priv->txList + priv->txHead;
1443 head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
1444 if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
1445 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
1446 ack |= TLAN_HC_GO;
1447 } else {
1448 priv->txInProgress = 0;
1449 }
1450 }
1451
1452 if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
1453 TLan_DioWrite8( dev->base_addr,
1454 TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
1455 if ( priv->timer.function == NULL ) {
1456 priv->timer.function = &TLan_Timer;
1457 priv->timer.data = (unsigned long) dev;
1458 priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
1459 priv->timerSetAt = jiffies;
1460 priv->timerType = TLAN_TIMER_ACTIVITY;
1461 add_timer(&priv->timer);
1462 } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
1463 priv->timerSetAt = jiffies;
1464 }
1465 }
1466
1467 return ack;
1468
1469 } /* TLan_HandleTxEOF */
1470
1471
1472
1473
1474 /***************************************************************
1475 * TLan_HandleStatOverflow
1476 *
1477 * Returns:
1478 * 1
1479 * Parms:
1480 * dev Device assigned the IRQ that was
1481 * raised.
1482 * host_int The contents of the HOST_INT
1483 * port.
1484 *
1485 * This function handles the Statistics Overflow interrupt
1486 * which means that one or more of the TLAN statistics
1487 * registers has reached 1/2 capacity and needs to be read.
1488 *
1489 **************************************************************/
1490
1491 static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
1492 {
1493 TLan_ReadAndClearStats( dev, TLAN_RECORD );
1494
1495 return 1;
1496
1497 } /* TLan_HandleStatOverflow */
1498
1499
1500
1501
1502 /***************************************************************
1503 * TLan_HandleRxEOF
1504 *
1505 * Returns:
1506 * 1
1507 * Parms:
1508 * dev Device assigned the IRQ that was
1509 * raised.
1510 * host_int The contents of the HOST_INT
1511 * port.
1512 *
1513 * This function handles the Rx EOF interrupt which
1514 * indicates a frame has been received by the adapter from
1515 * the net and the frame has been transferred to memory.
1516 * The function determines the bounce buffer the frame has
1517 * been loaded into, creates a new sk_buff big enough to
1518 * hold the frame, and sends it to protocol stack. It
1519 * then resets the used buffer and appends it to the end
1520 * of the list. If the frame was the last in the Rx
1521 * channel (EOC), the function restarts the receive channel
1522 * by sending an Rx Go command to the adapter. Then it
1523 * activates/continues the activity LED.
1524 *
1525 **************************************************************/
1526
1527 static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
1528 {
1529 TLanPrivateInfo *priv = netdev_priv(dev);
1530 u32 ack = 0;
1531 int eoc = 0;
1532 TLanList *head_list;
1533 struct sk_buff *skb;
1534 TLanList *tail_list;
1535 u16 tmpCStat;
1536 dma_addr_t head_list_phys;
1537
1538 TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOF (Head=%d Tail=%d)\n",
1539 priv->rxHead, priv->rxTail );
1540 head_list = priv->rxList + priv->rxHead;
1541 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1542
1543 while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
1544 dma_addr_t frameDma = head_list->buffer[0].address;
1545 u32 frameSize = head_list->frameSize;
1546 struct sk_buff *new_skb;
1547
1548 ack++;
1549 if (tmpCStat & TLAN_CSTAT_EOC)
1550 eoc = 1;
1551
1552 new_skb = netdev_alloc_skb_ip_align(dev,
1553 TLAN_MAX_FRAME_SIZE + 5);
1554 if ( !new_skb )
1555 goto drop_and_reuse;
1556
1557 skb = TLan_GetSKB(head_list);
1558 pci_unmap_single(priv->pciDev, frameDma,
1559 TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
1560 skb_put( skb, frameSize );
1561
1562 dev->stats.rx_bytes += frameSize;
1563
1564 skb->protocol = eth_type_trans( skb, dev );
1565 netif_rx( skb );
1566
1567 head_list->buffer[0].address = pci_map_single(priv->pciDev,
1568 new_skb->data,
1569 TLAN_MAX_FRAME_SIZE,
1570 PCI_DMA_FROMDEVICE);
1571
1572 TLan_StoreSKB(head_list, new_skb);
1573 drop_and_reuse:
1574 head_list->forward = 0;
1575 head_list->cStat = 0;
1576 tail_list = priv->rxList + priv->rxTail;
1577 tail_list->forward = head_list_phys;
1578
1579 CIRC_INC( priv->rxHead, TLAN_NUM_RX_LISTS );
1580 CIRC_INC( priv->rxTail, TLAN_NUM_RX_LISTS );
1581 head_list = priv->rxList + priv->rxHead;
1582 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1583 }
1584
1585 if (!ack)
1586 printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n");
1587
1588
1589 if ( eoc ) {
1590 TLAN_DBG( TLAN_DEBUG_RX,
1591 "RECEIVE: Handling RX EOC (Head=%d Tail=%d)\n",
1592 priv->rxHead, priv->rxTail );
1593 head_list = priv->rxList + priv->rxHead;
1594 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1595 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
1596 ack |= TLAN_HC_GO | TLAN_HC_RT;
1597 priv->rxEocCount++;
1598 }
1599
1600 if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
1601 TLan_DioWrite8( dev->base_addr,
1602 TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
1603 if ( priv->timer.function == NULL ) {
1604 priv->timer.function = &TLan_Timer;
1605 priv->timer.data = (unsigned long) dev;
1606 priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
1607 priv->timerSetAt = jiffies;
1608 priv->timerType = TLAN_TIMER_ACTIVITY;
1609 add_timer(&priv->timer);
1610 } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
1611 priv->timerSetAt = jiffies;
1612 }
1613 }
1614
1615 return ack;
1616
1617 } /* TLan_HandleRxEOF */
1618
1619
1620
1621
1622 /***************************************************************
1623 * TLan_HandleDummy
1624 *
1625 * Returns:
1626 * 1
1627 * Parms:
1628 * dev Device assigned the IRQ that was
1629 * raised.
1630 * host_int The contents of the HOST_INT
1631 * port.
1632 *
1633 * This function handles the Dummy interrupt, which is
1634 * raised whenever a test interrupt is generated by setting
1635 * the Req_Int bit of HOST_CMD to 1.
1636 *
1637 **************************************************************/
1638
1639 static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
1640 {
1641 printk( "TLAN: Test interrupt on %s.\n", dev->name );
1642 return 1;
1643
1644 } /* TLan_HandleDummy */
1645
1646
1647
1648
1649 /***************************************************************
1650 * TLan_HandleTxEOC
1651 *
1652 * Returns:
1653 * 1
1654 * Parms:
1655 * dev Device assigned the IRQ that was
1656 * raised.
1657 * host_int The contents of the HOST_INT
1658 * port.
1659 *
1660 * This driver is structured to determine EOC occurrences by
1661 * reading the CSTAT member of the list structure. Tx EOC
1662 * interrupts are disabled via the DIO INTDIS register.
1663 * However, TLAN chips before revision 3.0 didn't have this
1664 * functionality, so process EOC events if this is the
1665 * case.
1666 *
1667 **************************************************************/
1668
1669 static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
1670 {
1671 TLanPrivateInfo *priv = netdev_priv(dev);
1672 TLanList *head_list;
1673 dma_addr_t head_list_phys;
1674 u32 ack = 1;
1675
1676 host_int = 0;
1677 if ( priv->tlanRev < 0x30 ) {
1678 TLAN_DBG( TLAN_DEBUG_TX,
1679 "TRANSMIT: Handling TX EOC (Head=%d Tail=%d) -- IRQ\n",
1680 priv->txHead, priv->txTail );
1681 head_list = priv->txList + priv->txHead;
1682 head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
1683 if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
1684 netif_stop_queue(dev);
1685 outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
1686 ack |= TLAN_HC_GO;
1687 } else {
1688 priv->txInProgress = 0;
1689 }
1690 }
1691
1692 return ack;
1693
1694 } /* TLan_HandleTxEOC */
1695
1696
1697
1698
1699 /***************************************************************
1700 * TLan_HandleStatusCheck
1701 *
1702 * Returns:
1703 * 0 if Adapter check, 1 if Network Status check.
1704 * Parms:
1705 * dev Device assigned the IRQ that was
1706 * raised.
1707 * host_int The contents of the HOST_INT
1708 * port.
1709 *
1710 * This function handles Adapter Check/Network Status
1711 * interrupts generated by the adapter. It checks the
1712 * vector in the HOST_INT register to determine if it is
1713 * an Adapter Check interrupt. If so, it resets the
1714 * adapter. Otherwise it clears the status registers
1715 * and services the PHY.
1716 *
1717 **************************************************************/
1718
1719 static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
1720 {
1721 TLanPrivateInfo *priv = netdev_priv(dev);
1722 u32 ack;
1723 u32 error;
1724 u8 net_sts;
1725 u32 phy;
1726 u16 tlphy_ctl;
1727 u16 tlphy_sts;
1728
1729 ack = 1;
1730 if ( host_int & TLAN_HI_IV_MASK ) {
1731 netif_stop_queue( dev );
1732 error = inl( dev->base_addr + TLAN_CH_PARM );
1733 printk( "TLAN: %s: Adaptor Error = 0x%x\n", dev->name, error );
1734 TLan_ReadAndClearStats( dev, TLAN_RECORD );
1735 outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
1736
1737 schedule_work(&priv->tlan_tqueue);
1738
1739 netif_wake_queue(dev);
1740 ack = 0;
1741 } else {
1742 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name );
1743 phy = priv->phy[priv->phyNum];
1744
1745 net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
1746 if ( net_sts ) {
1747 TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
1748 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n",
1749 dev->name, (unsigned) net_sts );
1750 }
1751 if ( ( net_sts & TLAN_NET_STS_MIRQ ) && ( priv->phyNum == 0 ) ) {
1752 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_STS, &tlphy_sts );
1753 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
1754 if ( ! ( tlphy_sts & TLAN_TS_POLOK ) &&
1755 ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
1756 tlphy_ctl |= TLAN_TC_SWAPOL;
1757 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
1758 } else if ( ( tlphy_sts & TLAN_TS_POLOK ) &&
1759 ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
1760 tlphy_ctl &= ~TLAN_TC_SWAPOL;
1761 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
1762 }
1763
1764 if (debug) {
1765 TLan_PhyPrint( dev );
1766 }
1767 }
1768 }
1769
1770 return ack;
1771
1772 } /* TLan_HandleStatusCheck */
1773
1774
1775
1776
1777 /***************************************************************
1778 * TLan_HandleRxEOC
1779 *
1780 * Returns:
1781 * 1
1782 * Parms:
1783 * dev Device assigned the IRQ that was
1784 * raised.
1785 * host_int The contents of the HOST_INT
1786 * port.
1787 *
1788 * This driver is structured to determine EOC occurrences by
1789 * reading the CSTAT member of the list structure. Rx EOC
1790 * interrupts are disabled via the DIO INTDIS register.
1791 * However, TLAN chips before revision 3.0 didn't have this
1792 * CSTAT member or a INTDIS register, so if this chip is
1793 * pre-3.0, process EOC interrupts normally.
1794 *
1795 **************************************************************/
1796
1797 static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
1798 {
1799 TLanPrivateInfo *priv = netdev_priv(dev);
1800 dma_addr_t head_list_phys;
1801 u32 ack = 1;
1802
1803 if ( priv->tlanRev < 0x30 ) {
1804 TLAN_DBG( TLAN_DEBUG_RX,
1805 "RECEIVE: Handling RX EOC (Head=%d Tail=%d) -- IRQ\n",
1806 priv->rxHead, priv->rxTail );
1807 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1808 outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
1809 ack |= TLAN_HC_GO | TLAN_HC_RT;
1810 priv->rxEocCount++;
1811 }
1812
1813 return ack;
1814
1815 } /* TLan_HandleRxEOC */
1816
1817
1818
1819
1820 /*****************************************************************************
1821 ******************************************************************************
1822
1823 ThunderLAN Driver Timer Function
1824
1825 ******************************************************************************
1826 *****************************************************************************/
1827
1828
1829 /***************************************************************
1830 * TLan_Timer
1831 *
1832 * Returns:
1833 * Nothing
1834 * Parms:
1835 * data A value given to add timer when
1836 * add_timer was called.
1837 *
1838 * This function handles timed functionality for the
1839 * TLAN driver. The two current timer uses are for
1840 * delaying for autonegotionation and driving the ACT LED.
1841 * - Autonegotiation requires being allowed about
1842 * 2 1/2 seconds before attempting to transmit a
1843 * packet. It would be a very bad thing to hang
1844 * the kernel this long, so the driver doesn't
1845 * allow transmission 'til after this time, for
1846 * certain PHYs. It would be much nicer if all
1847 * PHYs were interrupt-capable like the internal
1848 * PHY.
1849 * - The ACT LED, which shows adapter activity, is
1850 * driven by the driver, and so must be left on
1851 * for a short period to power up the LED so it
1852 * can be seen. This delay can be changed by
1853 * changing the TLAN_TIMER_ACT_DELAY in tlan.h,
1854 * if desired. 100 ms produces a slightly
1855 * sluggish response.
1856 *
1857 **************************************************************/
1858
1859 static void TLan_Timer( unsigned long data )
1860 {
1861 struct net_device *dev = (struct net_device *) data;
1862 TLanPrivateInfo *priv = netdev_priv(dev);
1863 u32 elapsed;
1864 unsigned long flags = 0;
1865
1866 priv->timer.function = NULL;
1867
1868 switch ( priv->timerType ) {
1869 #ifdef MONITOR
1870 case TLAN_TIMER_LINK_BEAT:
1871 TLan_PhyMonitor( dev );
1872 break;
1873 #endif
1874 case TLAN_TIMER_PHY_PDOWN:
1875 TLan_PhyPowerDown( dev );
1876 break;
1877 case TLAN_TIMER_PHY_PUP:
1878 TLan_PhyPowerUp( dev );
1879 break;
1880 case TLAN_TIMER_PHY_RESET:
1881 TLan_PhyReset( dev );
1882 break;
1883 case TLAN_TIMER_PHY_START_LINK:
1884 TLan_PhyStartLink( dev );
1885 break;
1886 case TLAN_TIMER_PHY_FINISH_AN:
1887 TLan_PhyFinishAutoNeg( dev );
1888 break;
1889 case TLAN_TIMER_FINISH_RESET:
1890 TLan_FinishReset( dev );
1891 break;
1892 case TLAN_TIMER_ACTIVITY:
1893 spin_lock_irqsave(&priv->lock, flags);
1894 if ( priv->timer.function == NULL ) {
1895 elapsed = jiffies - priv->timerSetAt;
1896 if ( elapsed >= TLAN_TIMER_ACT_DELAY ) {
1897 TLan_DioWrite8( dev->base_addr,
1898 TLAN_LED_REG, TLAN_LED_LINK );
1899 } else {
1900 priv->timer.function = &TLan_Timer;
1901 priv->timer.expires = priv->timerSetAt
1902 + TLAN_TIMER_ACT_DELAY;
1903 spin_unlock_irqrestore(&priv->lock, flags);
1904 add_timer( &priv->timer );
1905 break;
1906 }
1907 }
1908 spin_unlock_irqrestore(&priv->lock, flags);
1909 break;
1910 default:
1911 break;
1912 }
1913
1914 } /* TLan_Timer */
1915
1916
1917
1918
1919 /*****************************************************************************
1920 ******************************************************************************
1921
1922 ThunderLAN Driver Adapter Related Routines
1923
1924 ******************************************************************************
1925 *****************************************************************************/
1926
1927
1928 /***************************************************************
1929 * TLan_ResetLists
1930 *
1931 * Returns:
1932 * Nothing
1933 * Parms:
1934 * dev The device structure with the list
1935 * stuctures to be reset.
1936 *
1937 * This routine sets the variables associated with managing
1938 * the TLAN lists to their initial values.
1939 *
1940 **************************************************************/
1941
1942 static void TLan_ResetLists( struct net_device *dev )
1943 {
1944 TLanPrivateInfo *priv = netdev_priv(dev);
1945 int i;
1946 TLanList *list;
1947 dma_addr_t list_phys;
1948 struct sk_buff *skb;
1949
1950 priv->txHead = 0;
1951 priv->txTail = 0;
1952 for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
1953 list = priv->txList + i;
1954 list->cStat = TLAN_CSTAT_UNUSED;
1955 list->buffer[0].address = 0;
1956 list->buffer[2].count = 0;
1957 list->buffer[2].address = 0;
1958 list->buffer[8].address = 0;
1959 list->buffer[9].address = 0;
1960 }
1961
1962 priv->rxHead = 0;
1963 priv->rxTail = TLAN_NUM_RX_LISTS - 1;
1964 for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
1965 list = priv->rxList + i;
1966 list_phys = priv->rxListDMA + sizeof(TLanList) * i;
1967 list->cStat = TLAN_CSTAT_READY;
1968 list->frameSize = TLAN_MAX_FRAME_SIZE;
1969 list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
1970 skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5);
1971 if ( !skb ) {
1972 pr_err("TLAN: out of memory for received data.\n" );
1973 break;
1974 }
1975
1976 list->buffer[0].address = pci_map_single(priv->pciDev,
1977 skb->data,
1978 TLAN_MAX_FRAME_SIZE,
1979 PCI_DMA_FROMDEVICE);
1980 TLan_StoreSKB(list, skb);
1981 list->buffer[1].count = 0;
1982 list->buffer[1].address = 0;
1983 list->forward = list_phys + sizeof(TLanList);
1984 }
1985
1986 /* in case ran out of memory early, clear bits */
1987 while (i < TLAN_NUM_RX_LISTS) {
1988 TLan_StoreSKB(priv->rxList + i, NULL);
1989 ++i;
1990 }
1991 list->forward = 0;
1992
1993 } /* TLan_ResetLists */
1994
1995
1996 static void TLan_FreeLists( struct net_device *dev )
1997 {
1998 TLanPrivateInfo *priv = netdev_priv(dev);
1999 int i;
2000 TLanList *list;
2001 struct sk_buff *skb;
2002
2003 for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
2004 list = priv->txList + i;
2005 skb = TLan_GetSKB(list);
2006 if ( skb ) {
2007 pci_unmap_single(
2008 priv->pciDev,
2009 list->buffer[0].address,
2010 max(skb->len,
2011 (unsigned int)TLAN_MIN_FRAME_SIZE),
2012 PCI_DMA_TODEVICE);
2013 dev_kfree_skb_any( skb );
2014 list->buffer[8].address = 0;
2015 list->buffer[9].address = 0;
2016 }
2017 }
2018
2019 for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
2020 list = priv->rxList + i;
2021 skb = TLan_GetSKB(list);
2022 if ( skb ) {
2023 pci_unmap_single(priv->pciDev,
2024 list->buffer[0].address,
2025 TLAN_MAX_FRAME_SIZE,
2026 PCI_DMA_FROMDEVICE);
2027 dev_kfree_skb_any( skb );
2028 list->buffer[8].address = 0;
2029 list->buffer[9].address = 0;
2030 }
2031 }
2032 } /* TLan_FreeLists */
2033
2034
2035
2036
2037 /***************************************************************
2038 * TLan_PrintDio
2039 *
2040 * Returns:
2041 * Nothing
2042 * Parms:
2043 * io_base Base IO port of the device of
2044 * which to print DIO registers.
2045 *
2046 * This function prints out all the internal (DIO)
2047 * registers of a TLAN chip.
2048 *
2049 **************************************************************/
2050
2051 static void TLan_PrintDio( u16 io_base )
2052 {
2053 u32 data0, data1;
2054 int i;
2055
2056 printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n",
2057 io_base );
2058 printk( "TLAN: Off. +0 +4\n" );
2059 for ( i = 0; i < 0x4C; i+= 8 ) {
2060 data0 = TLan_DioRead32( io_base, i );
2061 data1 = TLan_DioRead32( io_base, i + 0x4 );
2062 printk( "TLAN: 0x%02x 0x%08x 0x%08x\n", i, data0, data1 );
2063 }
2064
2065 } /* TLan_PrintDio */
2066
2067
2068
2069
2070 /***************************************************************
2071 * TLan_PrintList
2072 *
2073 * Returns:
2074 * Nothing
2075 * Parms:
2076 * list A pointer to the TLanList structure to
2077 * be printed.
2078 * type A string to designate type of list,
2079 * "Rx" or "Tx".
2080 * num The index of the list.
2081 *
2082 * This function prints out the contents of the list
2083 * pointed to by the list parameter.
2084 *
2085 **************************************************************/
2086
2087 static void TLan_PrintList( TLanList *list, char *type, int num)
2088 {
2089 int i;
2090
2091 printk( "TLAN: %s List %d at %p\n", type, num, list );
2092 printk( "TLAN: Forward = 0x%08x\n", list->forward );
2093 printk( "TLAN: CSTAT = 0x%04hx\n", list->cStat );
2094 printk( "TLAN: Frame Size = 0x%04hx\n", list->frameSize );
2095 /* for ( i = 0; i < 10; i++ ) { */
2096 for ( i = 0; i < 2; i++ ) {
2097 printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
2098 i, list->buffer[i].count, list->buffer[i].address );
2099 }
2100
2101 } /* TLan_PrintList */
2102
2103
2104
2105
2106 /***************************************************************
2107 * TLan_ReadAndClearStats
2108 *
2109 * Returns:
2110 * Nothing
2111 * Parms:
2112 * dev Pointer to device structure of adapter
2113 * to which to read stats.
2114 * record Flag indicating whether to add
2115 *
2116 * This functions reads all the internal status registers
2117 * of the TLAN chip, which clears them as a side effect.
2118 * It then either adds the values to the device's status
2119 * struct, or discards them, depending on whether record
2120 * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0).
2121 *
2122 **************************************************************/
2123
2124 static void TLan_ReadAndClearStats( struct net_device *dev, int record )
2125 {
2126 u32 tx_good, tx_under;
2127 u32 rx_good, rx_over;
2128 u32 def_tx, crc, code;
2129 u32 multi_col, single_col;
2130 u32 excess_col, late_col, loss;
2131
2132 outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR );
2133 tx_good = inb( dev->base_addr + TLAN_DIO_DATA );
2134 tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2135 tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
2136 tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2137
2138 outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR );
2139 rx_good = inb( dev->base_addr + TLAN_DIO_DATA );
2140 rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2141 rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
2142 rx_over = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2143
2144 outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR );
2145 def_tx = inb( dev->base_addr + TLAN_DIO_DATA );
2146 def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2147 crc = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2148 code = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2149
2150 outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
2151 multi_col = inb( dev->base_addr + TLAN_DIO_DATA );
2152 multi_col += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2153 single_col = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2154 single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8;
2155
2156 outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
2157 excess_col = inb( dev->base_addr + TLAN_DIO_DATA );
2158 late_col = inb( dev->base_addr + TLAN_DIO_DATA + 1 );
2159 loss = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2160
2161 if ( record ) {
2162 dev->stats.rx_packets += rx_good;
2163 dev->stats.rx_errors += rx_over + crc + code;
2164 dev->stats.tx_packets += tx_good;
2165 dev->stats.tx_errors += tx_under + loss;
2166 dev->stats.collisions += multi_col + single_col + excess_col + late_col;
2167
2168 dev->stats.rx_over_errors += rx_over;
2169 dev->stats.rx_crc_errors += crc;
2170 dev->stats.rx_frame_errors += code;
2171
2172 dev->stats.tx_aborted_errors += tx_under;
2173 dev->stats.tx_carrier_errors += loss;
2174 }
2175
2176 } /* TLan_ReadAndClearStats */
2177
2178
2179
2180
2181 /***************************************************************
2182 * TLan_Reset
2183 *
2184 * Returns:
2185 * 0
2186 * Parms:
2187 * dev Pointer to device structure of adapter
2188 * to be reset.
2189 *
2190 * This function resets the adapter and it's physical
2191 * device. See Chap. 3, pp. 9-10 of the "ThunderLAN
2192 * Programmer's Guide" for details. The routine tries to
2193 * implement what is detailed there, though adjustments
2194 * have been made.
2195 *
2196 **************************************************************/
2197
2198 static void
2199 TLan_ResetAdapter( struct net_device *dev )
2200 {
2201 TLanPrivateInfo *priv = netdev_priv(dev);
2202 int i;
2203 u32 addr;
2204 u32 data;
2205 u8 data8;
2206
2207 priv->tlanFullDuplex = false;
2208 priv->phyOnline=0;
2209 netif_carrier_off(dev);
2210
2211 /* 1. Assert reset bit. */
2212
2213 data = inl(dev->base_addr + TLAN_HOST_CMD);
2214 data |= TLAN_HC_AD_RST;
2215 outl(data, dev->base_addr + TLAN_HOST_CMD);
2216
2217 udelay(1000);
2218
2219 /* 2. Turn off interrupts. ( Probably isn't necessary ) */
2220
2221 data = inl(dev->base_addr + TLAN_HOST_CMD);
2222 data |= TLAN_HC_INT_OFF;
2223 outl(data, dev->base_addr + TLAN_HOST_CMD);
2224
2225 /* 3. Clear AREGs and HASHs. */
2226
2227 for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 ) {
2228 TLan_DioWrite32( dev->base_addr, (u16) i, 0 );
2229 }
2230
2231 /* 4. Setup NetConfig register. */
2232
2233 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2234 TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
2235
2236 /* 5. Load Ld_Tmr and Ld_Thr in HOST_CMD. */
2237
2238 outl( TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD );
2239 outl( TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD );
2240
2241 /* 6. Unreset the MII by setting NMRST (in NetSio) to 1. */
2242
2243 outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR );
2244 addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
2245 TLan_SetBit( TLAN_NET_SIO_NMRST, addr );
2246
2247 /* 7. Setup the remaining registers. */
2248
2249 if ( priv->tlanRev >= 0x30 ) {
2250 data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
2251 TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, data8 );
2252 }
2253 TLan_PhyDetect( dev );
2254 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
2255
2256 if ( priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY ) {
2257 data |= TLAN_NET_CFG_BIT;
2258 if ( priv->aui == 1 ) {
2259 TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
2260 } else if ( priv->duplex == TLAN_DUPLEX_FULL ) {
2261 TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 );
2262 priv->tlanFullDuplex = true;
2263 } else {
2264 TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
2265 }
2266 }
2267
2268 if ( priv->phyNum == 0 ) {
2269 data |= TLAN_NET_CFG_PHY_EN;
2270 }
2271 TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
2272
2273 if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2274 TLan_FinishReset( dev );
2275 } else {
2276 TLan_PhyPowerDown( dev );
2277 }
2278
2279 } /* TLan_ResetAdapter */
2280
2281
2282
2283
2284 static void
2285 TLan_FinishReset( struct net_device *dev )
2286 {
2287 TLanPrivateInfo *priv = netdev_priv(dev);
2288 u8 data;
2289 u32 phy;
2290 u8 sio;
2291 u16 status;
2292 u16 partner;
2293 u16 tlphy_ctl;
2294 u16 tlphy_par;
2295 u16 tlphy_id1, tlphy_id2;
2296 int i;
2297
2298 phy = priv->phy[priv->phyNum];
2299
2300 data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
2301 if ( priv->tlanFullDuplex ) {
2302 data |= TLAN_NET_CMD_DUPLEX;
2303 }
2304 TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, data );
2305 data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
2306 if ( priv->phyNum == 0 ) {
2307 data |= TLAN_NET_MASK_MASK7;
2308 }
2309 TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data );
2310 TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7 );
2311 TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &tlphy_id1 );
2312 TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &tlphy_id2 );
2313
2314 if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) ||
2315 ( priv->aui ) ) {
2316 status = MII_GS_LINK;
2317 printk( "TLAN: %s: Link forced.\n", dev->name );
2318 } else {
2319 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2320 udelay( 1000 );
2321 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2322 if ( (status & MII_GS_LINK) &&
2323 /* We only support link info on Nat.Sem. PHY's */
2324 (tlphy_id1 == NAT_SEM_ID1) &&
2325 (tlphy_id2 == NAT_SEM_ID2) ) {
2326 TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner );
2327 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_PAR, &tlphy_par );
2328
2329 printk( "TLAN: %s: Link active with ", dev->name );
2330 if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
2331 printk( "forced 10%sMbps %s-Duplex\n",
2332 tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
2333 tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
2334 } else {
2335 printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
2336 tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
2337 tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
2338 printk("TLAN: Partner capability: ");
2339 for (i = 5; i <= 10; i++)
2340 if (partner & (1<<i))
2341 printk("%s",media[i-5]);
2342 printk("\n");
2343 }
2344
2345 TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
2346 #ifdef MONITOR
2347 /* We have link beat..for now anyway */
2348 priv->link = 1;
2349 /*Enabling link beat monitoring */
2350 TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_LINK_BEAT );
2351 #endif
2352 } else if (status & MII_GS_LINK) {
2353 printk( "TLAN: %s: Link active\n", dev->name );
2354 TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
2355 }
2356 }
2357
2358 if ( priv->phyNum == 0 ) {
2359 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
2360 tlphy_ctl |= TLAN_TC_INTEN;
2361 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl );
2362 sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO );
2363 sio |= TLAN_NET_SIO_MINTEN;
2364 TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio );
2365 }
2366
2367 if ( status & MII_GS_LINK ) {
2368 TLan_SetMac( dev, 0, dev->dev_addr );
2369 priv->phyOnline = 1;
2370 outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
2371 if ( debug >= 1 && debug != TLAN_DEBUG_PROBE ) {
2372 outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
2373 }
2374 outl( priv->rxListDMA, dev->base_addr + TLAN_CH_PARM );
2375 outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
2376 netif_carrier_on(dev);
2377 } else {
2378 printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n",
2379 dev->name );
2380 TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
2381 return;
2382 }
2383 TLan_SetMulticastList(dev);
2384
2385 } /* TLan_FinishReset */
2386
2387
2388
2389
2390 /***************************************************************
2391 * TLan_SetMac
2392 *
2393 * Returns:
2394 * Nothing
2395 * Parms:
2396 * dev Pointer to device structure of adapter
2397 * on which to change the AREG.
2398 * areg The AREG to set the address in (0 - 3).
2399 * mac A pointer to an array of chars. Each
2400 * element stores one byte of the address.
2401 * IE, it isn't in ascii.
2402 *
2403 * This function transfers a MAC address to one of the
2404 * TLAN AREGs (address registers). The TLAN chip locks
2405 * the register on writing to offset 0 and unlocks the
2406 * register after writing to offset 5. If NULL is passed
2407 * in mac, then the AREG is filled with 0's.
2408 *
2409 **************************************************************/
2410
2411 static void TLan_SetMac( struct net_device *dev, int areg, char *mac )
2412 {
2413 int i;
2414
2415 areg *= 6;
2416
2417 if ( mac != NULL ) {
2418 for ( i = 0; i < 6; i++ )
2419 TLan_DioWrite8( dev->base_addr,
2420 TLAN_AREG_0 + areg + i, mac[i] );
2421 } else {
2422 for ( i = 0; i < 6; i++ )
2423 TLan_DioWrite8( dev->base_addr,
2424 TLAN_AREG_0 + areg + i, 0 );
2425 }
2426
2427 } /* TLan_SetMac */
2428
2429
2430
2431
2432 /*****************************************************************************
2433 ******************************************************************************
2434
2435 ThunderLAN Driver PHY Layer Routines
2436
2437 ******************************************************************************
2438 *****************************************************************************/
2439
2440
2441
2442 /*********************************************************************
2443 * TLan_PhyPrint
2444 *
2445 * Returns:
2446 * Nothing
2447 * Parms:
2448 * dev A pointer to the device structure of the
2449 * TLAN device having the PHYs to be detailed.
2450 *
2451 * This function prints the registers a PHY (aka transceiver).
2452 *
2453 ********************************************************************/
2454
2455 static void TLan_PhyPrint( struct net_device *dev )
2456 {
2457 TLanPrivateInfo *priv = netdev_priv(dev);
2458 u16 i, data0, data1, data2, data3, phy;
2459
2460 phy = priv->phy[priv->phyNum];
2461
2462 if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2463 printk( "TLAN: Device %s, Unmanaged PHY.\n", dev->name );
2464 } else if ( phy <= TLAN_PHY_MAX_ADDR ) {
2465 printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy );
2466 printk( "TLAN: Off. +0 +1 +2 +3\n" );
2467 for ( i = 0; i < 0x20; i+= 4 ) {
2468 printk( "TLAN: 0x%02x", i );
2469 TLan_MiiReadReg( dev, phy, i, &data0 );
2470 printk( " 0x%04hx", data0 );
2471 TLan_MiiReadReg( dev, phy, i + 1, &data1 );
2472 printk( " 0x%04hx", data1 );
2473 TLan_MiiReadReg( dev, phy, i + 2, &data2 );
2474 printk( " 0x%04hx", data2 );
2475 TLan_MiiReadReg( dev, phy, i + 3, &data3 );
2476 printk( " 0x%04hx\n", data3 );
2477 }
2478 } else {
2479 printk( "TLAN: Device %s, Invalid PHY.\n", dev->name );
2480 }
2481
2482 } /* TLan_PhyPrint */
2483
2484
2485
2486
2487 /*********************************************************************
2488 * TLan_PhyDetect
2489 *
2490 * Returns:
2491 * Nothing
2492 * Parms:
2493 * dev A pointer to the device structure of the adapter
2494 * for which the PHY needs determined.
2495 *
2496 * So far I've found that adapters which have external PHYs
2497 * may also use the internal PHY for part of the functionality.
2498 * (eg, AUI/Thinnet). This function finds out if this TLAN
2499 * chip has an internal PHY, and then finds the first external
2500 * PHY (starting from address 0) if it exists).
2501 *
2502 ********************************************************************/
2503
2504 static void TLan_PhyDetect( struct net_device *dev )
2505 {
2506 TLanPrivateInfo *priv = netdev_priv(dev);
2507 u16 control;
2508 u16 hi;
2509 u16 lo;
2510 u32 phy;
2511
2512 if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2513 priv->phyNum = 0xFFFF;
2514 return;
2515 }
2516
2517 TLan_MiiReadReg( dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi );
2518
2519 if ( hi != 0xFFFF ) {
2520 priv->phy[0] = TLAN_PHY_MAX_ADDR;
2521 } else {
2522 priv->phy[0] = TLAN_PHY_NONE;
2523 }
2524
2525 priv->phy[1] = TLAN_PHY_NONE;
2526 for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
2527 TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &control );
2528 TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &hi );
2529 TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &lo );
2530 if ( ( control != 0xFFFF ) ||
2531 ( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) {
2532 TLAN_DBG( TLAN_DEBUG_GNRL,
2533 "PHY found at %02x %04x %04x %04x\n",
2534 phy, control, hi, lo );
2535 if ( ( priv->phy[1] == TLAN_PHY_NONE ) &&
2536 ( phy != TLAN_PHY_MAX_ADDR ) ) {
2537 priv->phy[1] = phy;
2538 }
2539 }
2540 }
2541
2542 if ( priv->phy[1] != TLAN_PHY_NONE ) {
2543 priv->phyNum = 1;
2544 } else if ( priv->phy[0] != TLAN_PHY_NONE ) {
2545 priv->phyNum = 0;
2546 } else {
2547 printk( "TLAN: Cannot initialize device, no PHY was found!\n" );
2548 }
2549
2550 } /* TLan_PhyDetect */
2551
2552
2553
2554
2555 static void TLan_PhyPowerDown( struct net_device *dev )
2556 {
2557 TLanPrivateInfo *priv = netdev_priv(dev);
2558 u16 value;
2559
2560 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name );
2561 value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
2562 TLan_MiiSync( dev->base_addr );
2563 TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
2564 if ( ( priv->phyNum == 0 ) &&
2565 ( priv->phy[1] != TLAN_PHY_NONE ) &&
2566 ( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) {
2567 TLan_MiiSync( dev->base_addr );
2568 TLan_MiiWriteReg( dev, priv->phy[1], MII_GEN_CTL, value );
2569 }
2570
2571 /* Wait for 50 ms and powerup
2572 * This is abitrary. It is intended to make sure the
2573 * transceiver settles.
2574 */
2575 TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_PUP );
2576
2577 } /* TLan_PhyPowerDown */
2578
2579
2580
2581
2582 static void TLan_PhyPowerUp( struct net_device *dev )
2583 {
2584 TLanPrivateInfo *priv = netdev_priv(dev);
2585 u16 value;
2586
2587 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name );
2588 TLan_MiiSync( dev->base_addr );
2589 value = MII_GC_LOOPBK;
2590 TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
2591 TLan_MiiSync(dev->base_addr);
2592 /* Wait for 500 ms and reset the
2593 * transceiver. The TLAN docs say both 50 ms and
2594 * 500 ms, so do the longer, just in case.
2595 */
2596 TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_RESET );
2597
2598 } /* TLan_PhyPowerUp */
2599
2600
2601
2602
2603 static void TLan_PhyReset( struct net_device *dev )
2604 {
2605 TLanPrivateInfo *priv = netdev_priv(dev);
2606 u16 phy;
2607 u16 value;
2608
2609 phy = priv->phy[priv->phyNum];
2610
2611 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name );
2612 TLan_MiiSync( dev->base_addr );
2613 value = MII_GC_LOOPBK | MII_GC_RESET;
2614 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, value );
2615 TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
2616 while ( value & MII_GC_RESET ) {
2617 TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
2618 }
2619
2620 /* Wait for 500 ms and initialize.
2621 * I don't remember why I wait this long.
2622 * I've changed this to 50ms, as it seems long enough.
2623 */
2624 TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_START_LINK );
2625
2626 } /* TLan_PhyReset */
2627
2628
2629
2630
2631 static void TLan_PhyStartLink( struct net_device *dev )
2632 {
2633 TLanPrivateInfo *priv = netdev_priv(dev);
2634 u16 ability;
2635 u16 control;
2636 u16 data;
2637 u16 phy;
2638 u16 status;
2639 u16 tctl;
2640
2641 phy = priv->phy[priv->phyNum];
2642 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name );
2643 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2644 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &ability );
2645
2646 if ( ( status & MII_GS_AUTONEG ) &&
2647 ( ! priv->aui ) ) {
2648 ability = status >> 11;
2649 if ( priv->speed == TLAN_SPEED_10 &&
2650 priv->duplex == TLAN_DUPLEX_HALF) {
2651 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000);
2652 } else if ( priv->speed == TLAN_SPEED_10 &&
2653 priv->duplex == TLAN_DUPLEX_FULL) {
2654 priv->tlanFullDuplex = true;
2655 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100);
2656 } else if ( priv->speed == TLAN_SPEED_100 &&
2657 priv->duplex == TLAN_DUPLEX_HALF) {
2658 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000);
2659 } else if ( priv->speed == TLAN_SPEED_100 &&
2660 priv->duplex == TLAN_DUPLEX_FULL) {
2661 priv->tlanFullDuplex = true;
2662 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100);
2663 } else {
2664
2665 /* Set Auto-Neg advertisement */
2666 TLan_MiiWriteReg( dev, phy, MII_AN_ADV, (ability << 5) | 1);
2667 /* Enablee Auto-Neg */
2668 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1000 );
2669 /* Restart Auto-Neg */
2670 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1200 );
2671 /* Wait for 4 sec for autonegotiation
2672 * to complete. The max spec time is less than this
2673 * but the card need additional time to start AN.
2674 * .5 sec should be plenty extra.
2675 */
2676 printk( "TLAN: %s: Starting autonegotiation.\n", dev->name );
2677 TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN );
2678 return;
2679 }
2680
2681 }
2682
2683 if ( ( priv->aui ) && ( priv->phyNum != 0 ) ) {
2684 priv->phyNum = 0;
2685 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2686 TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
2687 TLan_SetTimer( dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN );
2688 return;
2689 } else if ( priv->phyNum == 0 ) {
2690 control = 0;
2691 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tctl );
2692 if ( priv->aui ) {
2693 tctl |= TLAN_TC_AUISEL;
2694 } else {
2695 tctl &= ~TLAN_TC_AUISEL;
2696 if ( priv->duplex == TLAN_DUPLEX_FULL ) {
2697 control |= MII_GC_DUPLEX;
2698 priv->tlanFullDuplex = true;
2699 }
2700 if ( priv->speed == TLAN_SPEED_100 ) {
2701 control |= MII_GC_SPEEDSEL;
2702 }
2703 }
2704 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, control );
2705 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tctl );
2706 }
2707
2708 /* Wait for 2 sec to give the transceiver time
2709 * to establish link.
2710 */
2711 TLan_SetTimer( dev, (4*HZ), TLAN_TIMER_FINISH_RESET );
2712
2713 } /* TLan_PhyStartLink */
2714
2715
2716
2717
2718 static void TLan_PhyFinishAutoNeg( struct net_device *dev )
2719 {
2720 TLanPrivateInfo *priv = netdev_priv(dev);
2721 u16 an_adv;
2722 u16 an_lpa;
2723 u16 data;
2724 u16 mode;
2725 u16 phy;
2726 u16 status;
2727
2728 phy = priv->phy[priv->phyNum];
2729
2730 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2731 udelay( 1000 );
2732 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2733
2734 if ( ! ( status & MII_GS_AUTOCMPLT ) ) {
2735 /* Wait for 8 sec to give the process
2736 * more time. Perhaps we should fail after a while.
2737 */
2738 if (!priv->neg_be_verbose++) {
2739 pr_info("TLAN: Giving autonegotiation more time.\n");
2740 pr_info("TLAN: Please check that your adapter has\n");
2741 pr_info("TLAN: been properly connected to a HUB or Switch.\n");
2742 pr_info("TLAN: Trying to establish link in the background...\n");
2743 }
2744 TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN );
2745 return;
2746 }
2747
2748 printk( "TLAN: %s: Autonegotiation complete.\n", dev->name );
2749 TLan_MiiReadReg( dev, phy, MII_AN_ADV, &an_adv );
2750 TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
2751 mode = an_adv & an_lpa & 0x03E0;
2752 if ( mode & 0x0100 ) {
2753 priv->tlanFullDuplex = true;
2754 } else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) {
2755 priv->tlanFullDuplex = true;
2756 }
2757
2758 if ( ( ! ( mode & 0x0180 ) ) &&
2759 ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) &&
2760 ( priv->phyNum != 0 ) ) {
2761 priv->phyNum = 0;
2762 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2763 TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
2764 TLan_SetTimer( dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN );
2765 return;
2766 }
2767
2768 if ( priv->phyNum == 0 ) {
2769 if ( ( priv->duplex == TLAN_DUPLEX_FULL ) ||
2770 ( an_adv & an_lpa & 0x0040 ) ) {
2771 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL,
2772 MII_GC_AUTOENB | MII_GC_DUPLEX );
2773 pr_info("TLAN: Starting internal PHY with FULL-DUPLEX\n" );
2774 } else {
2775 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB );
2776 pr_info( "TLAN: Starting internal PHY with HALF-DUPLEX\n" );
2777 }
2778 }
2779
2780 /* Wait for 100 ms. No reason in partiticular.
2781 */
2782 TLan_SetTimer( dev, (HZ/10), TLAN_TIMER_FINISH_RESET );
2783
2784 } /* TLan_PhyFinishAutoNeg */
2785
2786 #ifdef MONITOR
2787
2788 /*********************************************************************
2789 *
2790 * TLan_phyMonitor
2791 *
2792 * Returns:
2793 * None
2794 *
2795 * Params:
2796 * dev The device structure of this device.
2797 *
2798 *
2799 * This function monitors PHY condition by reading the status
2800 * register via the MII bus. This can be used to give info
2801 * about link changes (up/down), and possible switch to alternate
2802 * media.
2803 *
2804 * ******************************************************************/
2805
2806 void TLan_PhyMonitor( struct net_device *dev )
2807 {
2808 TLanPrivateInfo *priv = netdev_priv(dev);
2809 u16 phy;
2810 u16 phy_status;
2811
2812 phy = priv->phy[priv->phyNum];
2813
2814 /* Get PHY status register */
2815 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &phy_status );
2816
2817 /* Check if link has been lost */
2818 if (!(phy_status & MII_GS_LINK)) {
2819 if (priv->link) {
2820 priv->link = 0;
2821 printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
2822 netif_carrier_off(dev);
2823 TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
2824 return;
2825 }
2826 }
2827
2828 /* Link restablished? */
2829 if ((phy_status & MII_GS_LINK) && !priv->link) {
2830 priv->link = 1;
2831 printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
2832 netif_carrier_on(dev);
2833 }
2834
2835 /* Setup a new monitor */
2836 TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
2837 }
2838
2839 #endif /* MONITOR */
2840
2841
2842 /*****************************************************************************
2843 ******************************************************************************
2844
2845 ThunderLAN Driver MII Routines
2846
2847 These routines are based on the information in Chap. 2 of the
2848 "ThunderLAN Programmer's Guide", pp. 15-24.
2849
2850 ******************************************************************************
2851 *****************************************************************************/
2852
2853
2854 /***************************************************************
2855 * TLan_MiiReadReg
2856 *
2857 * Returns:
2858 * false if ack received ok
2859 * true if no ack received or other error
2860 *
2861 * Parms:
2862 * dev The device structure containing
2863 * The io address and interrupt count
2864 * for this device.
2865 * phy The address of the PHY to be queried.
2866 * reg The register whose contents are to be
2867 * retrieved.
2868 * val A pointer to a variable to store the
2869 * retrieved value.
2870 *
2871 * This function uses the TLAN's MII bus to retrieve the contents
2872 * of a given register on a PHY. It sends the appropriate info
2873 * and then reads the 16-bit register value from the MII bus via
2874 * the TLAN SIO register.
2875 *
2876 **************************************************************/
2877
2878 static bool TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
2879 {
2880 u8 nack;
2881 u16 sio, tmp;
2882 u32 i;
2883 bool err;
2884 int minten;
2885 TLanPrivateInfo *priv = netdev_priv(dev);
2886 unsigned long flags = 0;
2887
2888 err = false;
2889 outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
2890 sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
2891
2892 if (!in_irq())
2893 spin_lock_irqsave(&priv->lock, flags);
2894
2895 TLan_MiiSync(dev->base_addr);
2896
2897 minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
2898 if ( minten )
2899 TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
2900
2901 TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Start ( 01b ) */
2902 TLan_MiiSendData( dev->base_addr, 0x2, 2 ); /* Read ( 10b ) */
2903 TLan_MiiSendData( dev->base_addr, phy, 5 ); /* Device # */
2904 TLan_MiiSendData( dev->base_addr, reg, 5 ); /* Register # */
2905
2906
2907 TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio); /* Change direction */
2908
2909 TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Clock Idle bit */
2910 TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2911 TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Wait 300ns */
2912
2913 nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio); /* Check for ACK */
2914 TLan_SetBit(TLAN_NET_SIO_MCLK, sio); /* Finish ACK */
2915 if (nack) { /* No ACK, so fake it */
2916 for (i = 0; i < 16; i++) {
2917 TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
2918 TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2919 }
2920 tmp = 0xffff;
2921 err = true;
2922 } else { /* ACK, so read data */
2923 for (tmp = 0, i = 0x8000; i; i >>= 1) {
2924 TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
2925 if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
2926 tmp |= i;
2927 TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2928 }
2929 }
2930
2931
2932 TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Idle cycle */
2933 TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2934
2935 if ( minten )
2936 TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
2937
2938 *val = tmp;
2939
2940 if (!in_irq())
2941 spin_unlock_irqrestore(&priv->lock, flags);
2942
2943 return err;
2944
2945 } /* TLan_MiiReadReg */
2946
2947
2948
2949
2950 /***************************************************************
2951 * TLan_MiiSendData
2952 *
2953 * Returns:
2954 * Nothing
2955 * Parms:
2956 * base_port The base IO port of the adapter in
2957 * question.
2958 * dev The address of the PHY to be queried.
2959 * data The value to be placed on the MII bus.
2960 * num_bits The number of bits in data that are to
2961 * be placed on the MII bus.
2962 *
2963 * This function sends on sequence of bits on the MII
2964 * configuration bus.
2965 *
2966 **************************************************************/
2967
2968 static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
2969 {
2970 u16 sio;
2971 u32 i;
2972
2973 if ( num_bits == 0 )
2974 return;
2975
2976 outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
2977 sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
2978 TLan_SetBit( TLAN_NET_SIO_MTXEN, sio );
2979
2980 for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) {
2981 TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
2982 (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
2983 if ( data & i )
2984 TLan_SetBit( TLAN_NET_SIO_MDATA, sio );
2985 else
2986 TLan_ClearBit( TLAN_NET_SIO_MDATA, sio );
2987 TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
2988 (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
2989 }
2990
2991 } /* TLan_MiiSendData */
2992
2993
2994
2995
2996 /***************************************************************
2997 * TLan_MiiSync
2998 *
2999 * Returns:
3000 * Nothing
3001 * Parms:
3002 * base_port The base IO port of the adapter in
3003 * question.
3004 *
3005 * This functions syncs all PHYs in terms of the MII configuration
3006 * bus.
3007 *
3008 **************************************************************/
3009
3010 static void TLan_MiiSync( u16 base_port )
3011 {
3012 int i;
3013 u16 sio;
3014
3015 outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
3016 sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
3017
3018 TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio );
3019 for ( i = 0; i < 32; i++ ) {
3020 TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
3021 TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
3022 }
3023
3024 } /* TLan_MiiSync */
3025
3026
3027
3028
3029 /***************************************************************
3030 * TLan_MiiWriteReg
3031 *
3032 * Returns:
3033 * Nothing
3034 * Parms:
3035 * dev The device structure for the device
3036 * to write to.
3037 * phy The address of the PHY to be written to.
3038 * reg The register whose contents are to be
3039 * written.
3040 * val The value to be written to the register.
3041 *
3042 * This function uses the TLAN's MII bus to write the contents of a
3043 * given register on a PHY. It sends the appropriate info and then
3044 * writes the 16-bit register value from the MII configuration bus
3045 * via the TLAN SIO register.
3046 *
3047 **************************************************************/
3048
3049 static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
3050 {
3051 u16 sio;
3052 int minten;
3053 unsigned long flags = 0;
3054 TLanPrivateInfo *priv = netdev_priv(dev);
3055
3056 outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
3057 sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
3058
3059 if (!in_irq())
3060 spin_lock_irqsave(&priv->lock, flags);
3061
3062 TLan_MiiSync( dev->base_addr );
3063
3064 minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
3065 if ( minten )
3066 TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio );
3067
3068 TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Start ( 01b ) */
3069 TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Write ( 01b ) */
3070 TLan_MiiSendData( dev->base_addr, phy, 5 ); /* Device # */
3071 TLan_MiiSendData( dev->base_addr, reg, 5 ); /* Register # */
3072
3073 TLan_MiiSendData( dev->base_addr, 0x2, 2 ); /* Send ACK */
3074 TLan_MiiSendData( dev->base_addr, val, 16 ); /* Send Data */
3075
3076 TLan_ClearBit( TLAN_NET_SIO_MCLK, sio ); /* Idle cycle */
3077 TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
3078
3079 if ( minten )
3080 TLan_SetBit( TLAN_NET_SIO_MINTEN, sio );
3081
3082 if (!in_irq())
3083 spin_unlock_irqrestore(&priv->lock, flags);
3084
3085 } /* TLan_MiiWriteReg */
3086
3087
3088
3089
3090 /*****************************************************************************
3091 ******************************************************************************
3092
3093 ThunderLAN Driver Eeprom routines
3094
3095 The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A
3096 EEPROM. These functions are based on information in Microchip's
3097 data sheet. I don't know how well this functions will work with
3098 other EEPROMs.
3099
3100 ******************************************************************************
3101 *****************************************************************************/
3102
3103
3104 /***************************************************************
3105 * TLan_EeSendStart
3106 *
3107 * Returns:
3108 * Nothing
3109 * Parms:
3110 * io_base The IO port base address for the
3111 * TLAN device with the EEPROM to
3112 * use.
3113 *
3114 * This function sends a start cycle to an EEPROM attached
3115 * to a TLAN chip.
3116 *
3117 **************************************************************/
3118
3119 static void TLan_EeSendStart( u16 io_base )
3120 {
3121 u16 sio;
3122
3123 outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3124 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3125
3126 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3127 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3128 TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3129 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3130 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3131
3132 } /* TLan_EeSendStart */
3133
3134
3135
3136
3137 /***************************************************************
3138 * TLan_EeSendByte
3139 *
3140 * Returns:
3141 * If the correct ack was received, 0, otherwise 1
3142 * Parms: io_base The IO port base address for the
3143 * TLAN device with the EEPROM to
3144 * use.
3145 * data The 8 bits of information to
3146 * send to the EEPROM.
3147 * stop If TLAN_EEPROM_STOP is passed, a
3148 * stop cycle is sent after the
3149 * byte is sent after the ack is
3150 * read.
3151 *
3152 * This function sends a byte on the serial EEPROM line,
3153 * driving the clock to send each bit. The function then
3154 * reverses transmission direction and reads an acknowledge
3155 * bit.
3156 *
3157 **************************************************************/
3158
3159 static int TLan_EeSendByte( u16 io_base, u8 data, int stop )
3160 {
3161 int err;
3162 u8 place;
3163 u16 sio;
3164
3165 outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3166 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3167
3168 /* Assume clock is low, tx is enabled; */
3169 for ( place = 0x80; place != 0; place >>= 1 ) {
3170 if ( place & data )
3171 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3172 else
3173 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3174 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3175 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3176 }
3177 TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
3178 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3179 err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio );
3180 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3181 TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3182
3183 if ( ( ! err ) && stop ) {
3184 /* STOP, raise data while clock is high */
3185 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3186 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3187 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3188 }
3189
3190 return ( err );
3191
3192 } /* TLan_EeSendByte */
3193
3194
3195
3196
3197 /***************************************************************
3198 * TLan_EeReceiveByte
3199 *
3200 * Returns:
3201 * Nothing
3202 * Parms:
3203 * io_base The IO port base address for the
3204 * TLAN device with the EEPROM to
3205 * use.
3206 * data An address to a char to hold the
3207 * data sent from the EEPROM.
3208 * stop If TLAN_EEPROM_STOP is passed, a
3209 * stop cycle is sent after the
3210 * byte is received, and no ack is
3211 * sent.
3212 *
3213 * This function receives 8 bits of data from the EEPROM
3214 * over the serial link. It then sends and ack bit, or no
3215 * ack and a stop bit. This function is used to retrieve
3216 * data after the address of a byte in the EEPROM has been
3217 * sent.
3218 *
3219 **************************************************************/
3220
3221 static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
3222 {
3223 u8 place;
3224 u16 sio;
3225
3226 outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3227 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3228 *data = 0;
3229
3230 /* Assume clock is low, tx is enabled; */
3231 TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
3232 for ( place = 0x80; place; place >>= 1 ) {
3233 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3234 if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) )
3235 *data |= place;
3236 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3237 }
3238
3239 TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3240 if ( ! stop ) {
3241 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); /* Ack = 0 */
3242 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3243 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3244 } else {
3245 TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); /* No ack = 1 (?) */
3246 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3247 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3248 /* STOP, raise data while clock is high */
3249 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3250 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3251 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3252 }
3253
3254 } /* TLan_EeReceiveByte */
3255
3256
3257
3258
3259 /***************************************************************
3260 * TLan_EeReadByte
3261 *
3262 * Returns:
3263 * No error = 0, else, the stage at which the error
3264 * occurred.
3265 * Parms:
3266 * io_base The IO port base address for the
3267 * TLAN device with the EEPROM to
3268 * use.
3269 * ee_addr The address of the byte in the
3270 * EEPROM whose contents are to be
3271 * retrieved.
3272 * data An address to a char to hold the
3273 * data obtained from the EEPROM.
3274 *
3275 * This function reads a byte of information from an byte
3276 * cell in the EEPROM.
3277 *
3278 **************************************************************/
3279
3280 static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
3281 {
3282 int err;
3283 TLanPrivateInfo *priv = netdev_priv(dev);
3284 unsigned long flags = 0;
3285 int ret=0;
3286
3287 spin_lock_irqsave(&priv->lock, flags);
3288
3289 TLan_EeSendStart( dev->base_addr );
3290 err = TLan_EeSendByte( dev->base_addr, 0xA0, TLAN_EEPROM_ACK );
3291 if (err)
3292 {
3293 ret=1;
3294 goto fail;
3295 }
3296 err = TLan_EeSendByte( dev->base_addr, ee_addr, TLAN_EEPROM_ACK );
3297 if (err)
3298 {
3299 ret=2;
3300 goto fail;
3301 }
3302 TLan_EeSendStart( dev->base_addr );
3303 err = TLan_EeSendByte( dev->base_addr, 0xA1, TLAN_EEPROM_ACK );
3304 if (err)
3305 {
3306 ret=3;
3307 goto fail;
3308 }
3309 TLan_EeReceiveByte( dev->base_addr, data, TLAN_EEPROM_STOP );
3310 fail:
3311 spin_unlock_irqrestore(&priv->lock, flags);
3312
3313 return ret;
3314
3315 } /* TLan_EeReadByte */
3316
3317
3318
Linux with added FPC-III support