?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
enic: Add new firmware devcmds
[linux/fpc-iii.git] / drivers / net / tokenring / 3c359.c
blob10800f16a2316c60e60ec9f4ca73f04711713d89
1 /*
2 * 3c359.c (c) 2000 Mike Phillips (mikep@linuxtr.net) All Rights Reserved
3 *
4 * Linux driver for 3Com 3c359 Tokenlink Velocity XL PCI NIC
5 *
6 * Base Driver Olympic:
7 * Written 1999 Peter De Schrijver & Mike Phillips
8 *
9 * This software may be used and distributed according to the terms
10 * of the GNU General Public License, incorporated herein by reference.
11 *
12 * 7/17/00 - Clean up, version number 0.9.0. Ready to release to the world.
13 *
14 * 2/16/01 - Port up to kernel 2.4.2 ready for submission into the kernel.
15 * 3/05/01 - Last clean up stuff before submission.
16 * 2/15/01 - Finally, update to new pci api.
17 *
18 * To Do:
19 */
20
21 /*
22 * Technical Card Details
23 *
24 * All access to data is done with 16/8 bit transfers. The transfer
25 * method really sucks. You can only read or write one location at a time.
26 *
27 * Also, the microcode for the card must be uploaded if the card does not have
28 * the flashrom on board. This is a 28K bloat in the driver when compiled
29 * as a module.
30 *
31 * Rx is very simple, status into a ring of descriptors, dma data transfer,
32 * interrupts to tell us when a packet is received.
33 *
34 * Tx is a little more interesting. Similar scenario, descriptor and dma data
35 * transfers, but we don't have to interrupt the card to tell it another packet
36 * is ready for transmission, we are just doing simple memory writes, not io or mmio
37 * writes. The card can be set up to simply poll on the next
38 * descriptor pointer and when this value is non-zero will automatically download
39 * the next packet. The card then interrupts us when the packet is done.
40 *
41 */
42
43 #define XL_DEBUG 0
44
45 #include <linux/jiffies.h>
46 #include <linux/module.h>
47 #include <linux/kernel.h>
48 #include <linux/errno.h>
49 #include <linux/timer.h>
50 #include <linux/in.h>
51 #include <linux/ioport.h>
52 #include <linux/string.h>
53 #include <linux/proc_fs.h>
54 #include <linux/ptrace.h>
55 #include <linux/skbuff.h>
56 #include <linux/interrupt.h>
57 #include <linux/delay.h>
58 #include <linux/netdevice.h>
59 #include <linux/trdevice.h>
60 #include <linux/stddef.h>
61 #include <linux/init.h>
62 #include <linux/pci.h>
63 #include <linux/spinlock.h>
64 #include <linux/bitops.h>
65 #include <linux/firmware.h>
66 #include <linux/slab.h>
67
68 #include <net/checksum.h>
69
70 #include <asm/io.h>
71 #include <asm/system.h>
72
73 #include "3c359.h"
74
75 static char version[] __devinitdata =
76 "3c359.c v1.2.0 2/17/01 - Mike Phillips (mikep@linuxtr.net)" ;
77
78 #define FW_NAME "3com/3C359.bin"
79 MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
80 MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver\n") ;
81 MODULE_FIRMWARE(FW_NAME);
82
83 /* Module parameters */
84
85 /* Ring Speed 0,4,16
86 * 0 = Autosense
87 * 4,16 = Selected speed only, no autosense
88 * This allows the card to be the first on the ring
89 * and become the active monitor.
90 *
91 * WARNING: Some hubs will allow you to insert
92 * at the wrong speed.
93 *
94 * The adapter will _not_ fail to open if there are no
95 * active monitors on the ring, it will simply open up in
96 * its last known ringspeed if no ringspeed is specified.
97 */
98
99 static int ringspeed[XL_MAX_ADAPTERS] = {0,} ;
100
101 module_param_array(ringspeed, int, NULL, 0);
102 MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ;
103
104 /* Packet buffer size */
105
106 static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ;
107
108 module_param_array(pkt_buf_sz, int, NULL, 0) ;
109 MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ;
110 /* Message Level */
111
112 static int message_level[XL_MAX_ADAPTERS] = {0,} ;
113
114 module_param_array(message_level, int, NULL, 0) ;
115 MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ;
116 /*
117 * This is a real nasty way of doing this, but otherwise you
118 * will be stuck with 1555 lines of hex #'s in the code.
119 */
120
121 static DEFINE_PCI_DEVICE_TABLE(xl_pci_tbl) =
122 {
123 {PCI_VENDOR_ID_3COM,PCI_DEVICE_ID_3COM_3C359, PCI_ANY_ID, PCI_ANY_ID, },
124 { } /* terminate list */
125 };
126 MODULE_DEVICE_TABLE(pci,xl_pci_tbl) ;
127
128 static int xl_init(struct net_device *dev);
129 static int xl_open(struct net_device *dev);
130 static int xl_open_hw(struct net_device *dev) ;
131 static int xl_hw_reset(struct net_device *dev);
132 static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev);
133 static void xl_dn_comp(struct net_device *dev);
134 static int xl_close(struct net_device *dev);
135 static void xl_set_rx_mode(struct net_device *dev);
136 static irqreturn_t xl_interrupt(int irq, void *dev_id);
137 static int xl_set_mac_address(struct net_device *dev, void *addr) ;
138 static void xl_arb_cmd(struct net_device *dev);
139 static void xl_asb_cmd(struct net_device *dev) ;
140 static void xl_srb_cmd(struct net_device *dev, int srb_cmd) ;
141 static void xl_wait_misr_flags(struct net_device *dev) ;
142 static int xl_change_mtu(struct net_device *dev, int mtu);
143 static void xl_srb_bh(struct net_device *dev) ;
144 static void xl_asb_bh(struct net_device *dev) ;
145 static void xl_reset(struct net_device *dev) ;
146 static void xl_freemem(struct net_device *dev) ;
147
148
149 /* EEProm Access Functions */
150 static u16 xl_ee_read(struct net_device *dev, int ee_addr) ;
151 static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value) ;
152
153 /* Debugging functions */
154 #if XL_DEBUG
155 static void print_tx_state(struct net_device *dev) ;
156 static void print_rx_state(struct net_device *dev) ;
157
158 static void print_tx_state(struct net_device *dev)
159 {
160
161 struct xl_private *xl_priv = netdev_priv(dev);
162 struct xl_tx_desc *txd ;
163 u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
164 int i ;
165
166 printk("tx_ring_head: %d, tx_ring_tail: %d, free_ent: %d\n",xl_priv->tx_ring_head,
167 xl_priv->tx_ring_tail, xl_priv->free_ring_entries) ;
168 printk("Ring , Address , FSH , DnNextPtr, Buffer, Buffer_Len\n");
169 for (i = 0; i < 16; i++) {
170 txd = &(xl_priv->xl_tx_ring[i]) ;
171 printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(txd),
172 txd->framestartheader, txd->dnnextptr, txd->buffer, txd->buffer_length ) ;
173 }
174
175 printk("DNLISTPTR = %04x\n", readl(xl_mmio + MMIO_DNLISTPTR) );
176
177 printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL) );
178 printk("Queue status = %0x\n",netif_running(dev) ) ;
179 }
180
181 static void print_rx_state(struct net_device *dev)
182 {
183
184 struct xl_private *xl_priv = netdev_priv(dev);
185 struct xl_rx_desc *rxd ;
186 u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
187 int i ;
188
189 printk("rx_ring_tail: %d\n", xl_priv->rx_ring_tail);
190 printk("Ring , Address , FrameState , UPNextPtr, FragAddr, Frag_Len\n");
191 for (i = 0; i < 16; i++) {
192 /* rxd = (struct xl_rx_desc *)xl_priv->rx_ring_dma_addr + (i * sizeof(struct xl_rx_desc)) ; */
193 rxd = &(xl_priv->xl_rx_ring[i]) ;
194 printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(rxd),
195 rxd->framestatus, rxd->upnextptr, rxd->upfragaddr, rxd->upfraglen ) ;
196 }
197
198 printk("UPLISTPTR = %04x\n", readl(xl_mmio + MMIO_UPLISTPTR));
199
200 printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL));
201 printk("Queue status = %0x\n",netif_running(dev));
202 }
203 #endif
204
205 /*
206 * Read values from the on-board EEProm. This looks very strange
207 * but you have to wait for the EEProm to get/set the value before
208 * passing/getting the next value from the nic. As with all requests
209 * on this nic it has to be done in two stages, a) tell the nic which
210 * memory address you want to access and b) pass/get the value from the nic.
211 * With the EEProm, you have to wait before and inbetween access a) and b).
212 * As this is only read at initialization time and the wait period is very
213 * small we shouldn't have to worry about scheduling issues.
214 */
215
216 static u16 xl_ee_read(struct net_device *dev, int ee_addr)
217 {
218 struct xl_private *xl_priv = netdev_priv(dev);
219 u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
220
221 /* Wait for EEProm to not be busy */
222 writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
223 while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
224
225 /* Tell EEProm what we want to do and where */
226 writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
227 writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ;
228
229 /* Wait for EEProm to not be busy */
230 writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
231 while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
232
233 /* Tell EEProm what we want to do and where */
234 writel(IO_WORD_WRITE | EECONTROL , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
235 writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ;
236
237 /* Finally read the value from the EEProm */
238 writel(IO_WORD_READ | EEDATA , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
239 return readw(xl_mmio + MMIO_MACDATA) ;
240 }
241
242 /*
243 * Write values to the onboard eeprom. As with eeprom read you need to
244 * set which location to write, wait, value to write, wait, with the
245 * added twist of having to enable eeprom writes as well.
246 */
247
248 static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value)
249 {
250 struct xl_private *xl_priv = netdev_priv(dev);
251 u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
252
253 /* Wait for EEProm to not be busy */
254 writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
255 while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
256
257 /* Enable write/erase */
258 writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
259 writew(EE_ENABLE_WRITE, xl_mmio + MMIO_MACDATA) ;
260
261 /* Wait for EEProm to not be busy */
262 writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
263 while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
264
265 /* Put the value we want to write into EEDATA */
266 writel(IO_WORD_WRITE | EEDATA, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
267 writew(ee_value, xl_mmio + MMIO_MACDATA) ;
268
269 /* Tell EEProm to write eevalue into ee_addr */
270 writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
271 writew(EEWRITE + ee_addr, xl_mmio + MMIO_MACDATA) ;
272
273 /* Wait for EEProm to not be busy, to ensure write gets done */
274 writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
275 while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ;
276
277 return ;
278 }
279
280 static const struct net_device_ops xl_netdev_ops = {
281 .ndo_open = xl_open,
282 .ndo_stop = xl_close,
283 .ndo_start_xmit = xl_xmit,
284 .ndo_change_mtu = xl_change_mtu,
285 .ndo_set_multicast_list = xl_set_rx_mode,
286 .ndo_set_mac_address = xl_set_mac_address,
287 };
288
289 static int __devinit xl_probe(struct pci_dev *pdev,
290 const struct pci_device_id *ent)
291 {
292 struct net_device *dev ;
293 struct xl_private *xl_priv ;
294 static int card_no = -1 ;
295 int i ;
296
297 card_no++ ;
298
299 if (pci_enable_device(pdev)) {
300 return -ENODEV ;
301 }
302
303 pci_set_master(pdev);
304
305 if ((i = pci_request_regions(pdev,"3c359"))) {
306 return i ;
307 } ;
308
309 /*
310 * Allowing init_trdev to allocate the private data will align
311 * xl_private on a 32 bytes boundary which we need for the rx/tx
312 * descriptors
313 */
314
315 dev = alloc_trdev(sizeof(struct xl_private)) ;
316 if (!dev) {
317 pci_release_regions(pdev) ;
318 return -ENOMEM ;
319 }
320 xl_priv = netdev_priv(dev);
321
322 #if XL_DEBUG
323 printk("pci_device: %p, dev:%p, dev->priv: %p, ba[0]: %10x, ba[1]:%10x\n",
324 pdev, dev, netdev_priv(dev), (unsigned int)pdev->resource[0].start, (unsigned int)pdev->resource[1].start);
325 #endif
326
327 dev->irq=pdev->irq;
328 dev->base_addr=pci_resource_start(pdev,0) ;
329 xl_priv->xl_card_name = pci_name(pdev);
330 xl_priv->xl_mmio=ioremap(pci_resource_start(pdev,1), XL_IO_SPACE);
331 xl_priv->pdev = pdev ;
332
333 if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) )
334 xl_priv->pkt_buf_sz = PKT_BUF_SZ ;
335 else
336 xl_priv->pkt_buf_sz = pkt_buf_sz[card_no] ;
337
338 dev->mtu = xl_priv->pkt_buf_sz - TR_HLEN ;
339 xl_priv->xl_ring_speed = ringspeed[card_no] ;
340 xl_priv->xl_message_level = message_level[card_no] ;
341 xl_priv->xl_functional_addr[0] = xl_priv->xl_functional_addr[1] = xl_priv->xl_functional_addr[2] = xl_priv->xl_functional_addr[3] = 0 ;
342 xl_priv->xl_copy_all_options = 0 ;
343
344 if((i = xl_init(dev))) {
345 iounmap(xl_priv->xl_mmio) ;
346 free_netdev(dev) ;
347 pci_release_regions(pdev) ;
348 return i ;
349 }
350
351 dev->netdev_ops = &xl_netdev_ops;
352 SET_NETDEV_DEV(dev, &pdev->dev);
353
354 pci_set_drvdata(pdev,dev) ;
355 if ((i = register_netdev(dev))) {
356 printk(KERN_ERR "3C359, register netdev failed\n") ;
357 pci_set_drvdata(pdev,NULL) ;
358 iounmap(xl_priv->xl_mmio) ;
359 free_netdev(dev) ;
360 pci_release_regions(pdev) ;
361 return i ;
362 }
363
364 printk(KERN_INFO "3C359: %s registered as: %s\n",xl_priv->xl_card_name,dev->name) ;
365
366 return 0;
367 }
368
369 static int xl_init_firmware(struct xl_private *xl_priv)
370 {
371 int err;
372
373 err = request_firmware(&xl_priv->fw, FW_NAME, &xl_priv->pdev->dev);
374 if (err) {
375 printk(KERN_ERR "Failed to load firmware \"%s\"\n", FW_NAME);
376 return err;
377 }
378
379 if (xl_priv->fw->size < 16) {
380 printk(KERN_ERR "Bogus length %zu in \"%s\"\n",
381 xl_priv->fw->size, FW_NAME);
382 release_firmware(xl_priv->fw);
383 err = -EINVAL;
384 }
385
386 return err;
387 }
388
389 static int __devinit xl_init(struct net_device *dev)
390 {
391 struct xl_private *xl_priv = netdev_priv(dev);
392 int err;
393
394 printk(KERN_INFO "%s\n", version);
395 printk(KERN_INFO "%s: I/O at %hx, MMIO at %p, using irq %d\n",
396 xl_priv->xl_card_name, (unsigned int)dev->base_addr ,xl_priv->xl_mmio, dev->irq);
397
398 spin_lock_init(&xl_priv->xl_lock) ;
399
400 err = xl_init_firmware(xl_priv);
401 if (err == 0)
402 err = xl_hw_reset(dev);
403
404 return err;
405 }
406
407
408 /*
409 * Hardware reset. This needs to be a separate entity as we need to reset the card
410 * when we change the EEProm settings.
411 */
412
413 static int xl_hw_reset(struct net_device *dev)
414 {
415 struct xl_private *xl_priv = netdev_priv(dev);
416 u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
417 unsigned long t ;
418 u16 i ;
419 u16 result_16 ;
420 u8 result_8 ;
421 u16 start ;
422 int j ;
423
424 if (xl_priv->fw == NULL)
425 return -EINVAL;
426
427 /*
428 * Reset the card. If the card has got the microcode on board, we have
429 * missed the initialization interrupt, so we must always do this.
430 */
431
432 writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
433
434 /*
435 * Must wait for cmdInProgress bit (12) to clear before continuing with
436 * card configuration.
437 */
438
439 t=jiffies;
440 while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
441 schedule();
442 if (time_after(jiffies, t + 40 * HZ)) {
443 printk(KERN_ERR "%s: 3COM 3C359 Velocity XL card not responding to global reset.\n", dev->name);
444 return -ENODEV;
445 }
446 }
447
448 /*
449 * Enable pmbar by setting bit in CPAttention
450 */
451
452 writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
453 result_8 = readb(xl_mmio + MMIO_MACDATA) ;
454 result_8 = result_8 | CPA_PMBARVIS ;
455 writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
456 writeb(result_8, xl_mmio + MMIO_MACDATA) ;
457
458 /*
459 * Read cpHold bit in pmbar, if cleared we have got Flashrom on board.
460 * If not, we need to upload the microcode to the card
461 */
462
463 writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
464
465 #if XL_DEBUG
466 printk(KERN_INFO "Read from PMBAR = %04x\n", readw(xl_mmio + MMIO_MACDATA));
467 #endif
468
469 if ( readw( (xl_mmio + MMIO_MACDATA)) & PMB_CPHOLD ) {
470
471 /* Set PmBar, privateMemoryBase bits (8:2) to 0 */
472
473 writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
474 result_16 = readw(xl_mmio + MMIO_MACDATA) ;
475 result_16 = result_16 & ~((0x7F) << 2) ;
476 writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
477 writew(result_16,xl_mmio + MMIO_MACDATA) ;
478
479 /* Set CPAttention, memWrEn bit */
480
481 writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
482 result_8 = readb(xl_mmio + MMIO_MACDATA) ;
483 result_8 = result_8 | CPA_MEMWREN ;
484 writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
485 writeb(result_8, xl_mmio + MMIO_MACDATA) ;
486
487 /*
488 * Now to write the microcode into the shared ram
489 * The microcode must finish at position 0xFFFF,
490 * so we must subtract to get the start position for the code
491 *
492 * Looks strange but ensures compiler only uses
493 * 16 bit unsigned int
494 */
495 start = (0xFFFF - (xl_priv->fw->size) + 1) ;
496
497 printk(KERN_INFO "3C359: Uploading Microcode: ");
498
499 for (i = start, j = 0; j < xl_priv->fw->size; i++, j++) {
500 writel(MEM_BYTE_WRITE | 0XD0000 | i,
501 xl_mmio + MMIO_MAC_ACCESS_CMD);
502 writeb(xl_priv->fw->data[j], xl_mmio + MMIO_MACDATA);
503 if (j % 1024 == 0)
504 printk(".");
505 }
506 printk("\n") ;
507
508 for (i = 0; i < 16; i++) {
509 writel((MEM_BYTE_WRITE | 0xDFFF0) + i,
510 xl_mmio + MMIO_MAC_ACCESS_CMD);
511 writeb(xl_priv->fw->data[xl_priv->fw->size - 16 + i],
512 xl_mmio + MMIO_MACDATA);
513 }
514
515 /*
516 * Have to write the start address of the upload to FFF4, but
517 * the address must be >> 4. You do not want to know how long
518 * it took me to discover this.
519 */
520
521 writel(MEM_WORD_WRITE | 0xDFFF4, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
522 writew(start >> 4, xl_mmio + MMIO_MACDATA);
523
524 /* Clear the CPAttention, memWrEn Bit */
525
526 writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
527 result_8 = readb(xl_mmio + MMIO_MACDATA) ;
528 result_8 = result_8 & ~CPA_MEMWREN ;
529 writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
530 writeb(result_8, xl_mmio + MMIO_MACDATA) ;
531
532 /* Clear the cpHold bit in pmbar */
533
534 writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
535 result_16 = readw(xl_mmio + MMIO_MACDATA) ;
536 result_16 = result_16 & ~PMB_CPHOLD ;
537 writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
538 writew(result_16,xl_mmio + MMIO_MACDATA) ;
539
540
541 } /* If microcode upload required */
542
543 /*
544 * The card should now go though a self test procedure and get itself ready
545 * to be opened, we must wait for an srb response with the initialization
546 * information.
547 */
548
549 #if XL_DEBUG
550 printk(KERN_INFO "%s: Microcode uploaded, must wait for the self test to complete\n", dev->name);
551 #endif
552
553 writew(SETINDENABLE | 0xFFF, xl_mmio + MMIO_COMMAND) ;
554
555 t=jiffies;
556 while ( !(readw(xl_mmio + MMIO_INTSTATUS_AUTO) & INTSTAT_SRB) ) {
557 schedule();
558 if (time_after(jiffies, t + 15 * HZ)) {
559 printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
560 return -ENODEV;
561 }
562 }
563
564 /*
565 * Write the RxBufArea with D000, RxEarlyThresh, TxStartThresh,
566 * DnPriReqThresh, read the tech docs if you want to know what
567 * values they need to be.
568 */
569
570 writel(MMIO_WORD_WRITE | RXBUFAREA, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
571 writew(0xD000, xl_mmio + MMIO_MACDATA) ;
572
573 writel(MMIO_WORD_WRITE | RXEARLYTHRESH, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
574 writew(0X0020, xl_mmio + MMIO_MACDATA) ;
575
576 writew( SETTXSTARTTHRESH | 0x40 , xl_mmio + MMIO_COMMAND) ;
577
578 writeb(0x04, xl_mmio + MMIO_DNBURSTTHRESH) ;
579 writeb(0x04, xl_mmio + DNPRIREQTHRESH) ;
580
581 /*
582 * Read WRBR to provide the location of the srb block, have to use byte reads not word reads.
583 * Tech docs have this wrong !!!!
584 */
585
586 writel(MMIO_BYTE_READ | WRBR, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
587 xl_priv->srb = readb(xl_mmio + MMIO_MACDATA) << 8 ;
588 writel( (MMIO_BYTE_READ | WRBR) + 1, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
589 xl_priv->srb = xl_priv->srb | readb(xl_mmio + MMIO_MACDATA) ;
590
591 #if XL_DEBUG
592 writel(IO_WORD_READ | SWITCHSETTINGS, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
593 if ( readw(xl_mmio + MMIO_MACDATA) & 2) {
594 printk(KERN_INFO "Default ring speed 4 mbps\n");
595 } else {
596 printk(KERN_INFO "Default ring speed 16 mbps\n");
597 }
598 printk(KERN_INFO "%s: xl_priv->srb = %04x\n",xl_priv->xl_card_name, xl_priv->srb);
599 #endif
600
601 return 0;
602 }
603
604 static int xl_open(struct net_device *dev)
605 {
606 struct xl_private *xl_priv=netdev_priv(dev);
607 u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
608 u8 i ;
609 __le16 hwaddr[3] ; /* Should be u8[6] but we get word return values */
610 int open_err ;
611
612 u16 switchsettings, switchsettings_eeprom ;
613
614 if (request_irq(dev->irq, xl_interrupt, IRQF_SHARED , "3c359", dev))
615 return -EAGAIN;
616
617 /*
618 * Read the information from the EEPROM that we need.
619 */
620
621 hwaddr[0] = cpu_to_le16(xl_ee_read(dev,0x10));
622 hwaddr[1] = cpu_to_le16(xl_ee_read(dev,0x11));
623 hwaddr[2] = cpu_to_le16(xl_ee_read(dev,0x12));
624
625 /* Ring speed */
626
627 switchsettings_eeprom = xl_ee_read(dev,0x08) ;
628 switchsettings = switchsettings_eeprom ;
629
630 if (xl_priv->xl_ring_speed != 0) {
631 if (xl_priv->xl_ring_speed == 4)
632 switchsettings = switchsettings | 0x02 ;
633 else
634 switchsettings = switchsettings & ~0x02 ;
635 }
636
637 /* Only write EEProm if there has been a change */
638 if (switchsettings != switchsettings_eeprom) {
639 xl_ee_write(dev,0x08,switchsettings) ;
640 /* Hardware reset after changing EEProm */
641 xl_hw_reset(dev) ;
642 }
643
644 memcpy(dev->dev_addr,hwaddr,dev->addr_len) ;
645
646 open_err = xl_open_hw(dev) ;
647
648 /*
649 * This really needs to be cleaned up with better error reporting.
650 */
651
652 if (open_err != 0) { /* Something went wrong with the open command */
653 if (open_err & 0x07) { /* Wrong speed, retry at different speed */
654 printk(KERN_WARNING "%s: Open Error, retrying at different ringspeed\n", dev->name);
655 switchsettings = switchsettings ^ 2 ;
656 xl_ee_write(dev,0x08,switchsettings) ;
657 xl_hw_reset(dev) ;
658 open_err = xl_open_hw(dev) ;
659 if (open_err != 0) {
660 printk(KERN_WARNING "%s: Open error returned a second time, we're bombing out now\n", dev->name);
661 free_irq(dev->irq,dev) ;
662 return -ENODEV ;
663 }
664 } else {
665 printk(KERN_WARNING "%s: Open Error = %04x\n", dev->name, open_err) ;
666 free_irq(dev->irq,dev) ;
667 return -ENODEV ;
668 }
669 }
670
671 /*
672 * Now to set up the Rx and Tx buffer structures
673 */
674 /* These MUST be on 8 byte boundaries */
675 xl_priv->xl_tx_ring = kzalloc((sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE) + 7, GFP_DMA | GFP_KERNEL);
676 if (xl_priv->xl_tx_ring == NULL) {
677 printk(KERN_WARNING "%s: Not enough memory to allocate tx buffers.\n",
678 dev->name);
679 free_irq(dev->irq,dev);
680 return -ENOMEM;
681 }
682 xl_priv->xl_rx_ring = kzalloc((sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE) +7, GFP_DMA | GFP_KERNEL);
683 if (xl_priv->xl_rx_ring == NULL) {
684 printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers.\n",
685 dev->name);
686 free_irq(dev->irq,dev);
687 kfree(xl_priv->xl_tx_ring);
688 return -ENOMEM;
689 }
690
691 /* Setup Rx Ring */
692 for (i=0 ; i < XL_RX_RING_SIZE ; i++) {
693 struct sk_buff *skb ;
694
695 skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ;
696 if (skb==NULL)
697 break ;
698
699 skb->dev = dev ;
700 xl_priv->xl_rx_ring[i].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE));
701 xl_priv->xl_rx_ring[i].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG;
702 xl_priv->rx_ring_skb[i] = skb ;
703 }
704
705 if (i==0) {
706 printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name);
707 free_irq(dev->irq,dev) ;
708 kfree(xl_priv->xl_tx_ring);
709 kfree(xl_priv->xl_rx_ring);
710 return -EIO ;
711 }
712
713 xl_priv->rx_ring_no = i ;
714 xl_priv->rx_ring_tail = 0 ;
715 xl_priv->rx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_rx_ring, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_TODEVICE) ;
716 for (i=0;i<(xl_priv->rx_ring_no-1);i++) {
717 xl_priv->xl_rx_ring[i].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * (i+1)));
718 }
719 xl_priv->xl_rx_ring[i].upnextptr = 0 ;
720
721 writel(xl_priv->rx_ring_dma_addr, xl_mmio + MMIO_UPLISTPTR) ;
722
723 /* Setup Tx Ring */
724
725 xl_priv->tx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_tx_ring, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE,PCI_DMA_TODEVICE) ;
726
727 xl_priv->tx_ring_head = 1 ;
728 xl_priv->tx_ring_tail = 255 ; /* Special marker for first packet */
729 xl_priv->free_ring_entries = XL_TX_RING_SIZE ;
730
731 /*
732 * Setup the first dummy DPD entry for polling to start working.
733 */
734
735 xl_priv->xl_tx_ring[0].framestartheader = TXDPDEMPTY;
736 xl_priv->xl_tx_ring[0].buffer = 0 ;
737 xl_priv->xl_tx_ring[0].buffer_length = 0 ;
738 xl_priv->xl_tx_ring[0].dnnextptr = 0 ;
739
740 writel(xl_priv->tx_ring_dma_addr, xl_mmio + MMIO_DNLISTPTR) ;
741 writel(DNUNSTALL, xl_mmio + MMIO_COMMAND) ;
742 writel(UPUNSTALL, xl_mmio + MMIO_COMMAND) ;
743 writel(DNENABLE, xl_mmio + MMIO_COMMAND) ;
744 writeb(0x40, xl_mmio + MMIO_DNPOLL) ;
745
746 /*
747 * Enable interrupts on the card
748 */
749
750 writel(SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
751 writel(SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
752
753 netif_start_queue(dev) ;
754 return 0;
755
756 }
757
758 static int xl_open_hw(struct net_device *dev)
759 {
760 struct xl_private *xl_priv=netdev_priv(dev);
761 u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
762 u16 vsoff ;
763 char ver_str[33];
764 int open_err ;
765 int i ;
766 unsigned long t ;
767
768 /*
769 * Okay, let's build up the Open.NIC srb command
770 *
771 */
772
773 writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
774 writeb(OPEN_NIC, xl_mmio + MMIO_MACDATA) ;
775
776 /*
777 * Use this as a test byte, if it comes back with the same value, the command didn't work
778 */
779
780 writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb)+ 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
781 writeb(0xff,xl_mmio + MMIO_MACDATA) ;
782
783 /* Open options */
784 writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
785 writeb(0x00, xl_mmio + MMIO_MACDATA) ;
786 writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 9, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
787 writeb(0x00, xl_mmio + MMIO_MACDATA) ;
788
789 /*
790 * Node address, be careful here, the docs say you can just put zeros here and it will use
791 * the hardware address, it doesn't, you must include the node address in the open command.
792 */
793
794 if (xl_priv->xl_laa[0]) { /* If using a LAA address */
795 for (i=10;i<16;i++) {
796 writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
797 writeb(xl_priv->xl_laa[i-10],xl_mmio + MMIO_MACDATA) ;
798 }
799 memcpy(dev->dev_addr,xl_priv->xl_laa,dev->addr_len) ;
800 } else { /* Regular hardware address */
801 for (i=10;i<16;i++) {
802 writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
803 writeb(dev->dev_addr[i-10], xl_mmio + MMIO_MACDATA) ;
804 }
805 }
806
807 /* Default everything else to 0 */
808 for (i = 16; i < 34; i++) {
809 writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
810 writeb(0x00,xl_mmio + MMIO_MACDATA) ;
811 }
812
813 /*
814 * Set the csrb bit in the MISR register
815 */
816
817 xl_wait_misr_flags(dev) ;
818 writel(MEM_BYTE_WRITE | MF_CSRB, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
819 writeb(0xFF, xl_mmio + MMIO_MACDATA) ;
820 writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
821 writeb(MISR_CSRB , xl_mmio + MMIO_MACDATA) ;
822
823 /*
824 * Now wait for the command to run
825 */
826
827 t=jiffies;
828 while (! (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
829 schedule();
830 if (time_after(jiffies, t + 40 * HZ)) {
831 printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
832 break ;
833 }
834 }
835
836 /*
837 * Let's interpret the open response
838 */
839
840 writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb)+2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
841 if (readb(xl_mmio + MMIO_MACDATA)!=0) {
842 open_err = readb(xl_mmio + MMIO_MACDATA) << 8 ;
843 writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb) + 7, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
844 open_err |= readb(xl_mmio + MMIO_MACDATA) ;
845 return open_err ;
846 } else {
847 writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
848 xl_priv->asb = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
849 printk(KERN_INFO "%s: Adapter Opened Details: ",dev->name) ;
850 printk("ASB: %04x",xl_priv->asb ) ;
851 writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 10, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
852 printk(", SRB: %04x",swab16(readw(xl_mmio + MMIO_MACDATA)) ) ;
853
854 writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 12, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
855 xl_priv->arb = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
856 printk(", ARB: %04x\n",xl_priv->arb );
857 writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 14, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
858 vsoff = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
859
860 /*
861 * Interesting, sending the individual characters directly to printk was causing klogd to use
862 * use 100% of processor time, so we build up the string and print that instead.
863 */
864
865 for (i=0;i<0x20;i++) {
866 writel( (MEM_BYTE_READ | 0xD0000 | vsoff) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
867 ver_str[i] = readb(xl_mmio + MMIO_MACDATA) ;
868 }
869 ver_str[i] = '\0' ;
870 printk(KERN_INFO "%s: Microcode version String: %s\n",dev->name,ver_str);
871 }
872
873 /*
874 * Issue the AckInterrupt
875 */
876 writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
877
878 return 0 ;
879 }
880
881 /*
882 * There are two ways of implementing rx on the 359 NIC, either
883 * interrupt driven or polling. We are going to uses interrupts,
884 * it is the easier way of doing things.
885 *
886 * The Rx works with a ring of Rx descriptors. At initialise time the ring
887 * entries point to the next entry except for the last entry in the ring
888 * which points to 0. The card is programmed with the location of the first
889 * available descriptor and keeps reading the next_ptr until next_ptr is set
890 * to 0. Hopefully with a ring size of 16 the card will never get to read a next_ptr
891 * of 0. As the Rx interrupt is received we copy the frame up to the protocol layers
892 * and then point the end of the ring to our current position and point our current
893 * position to 0, therefore making the current position the last position on the ring.
894 * The last position on the ring therefore loops continually loops around the rx ring.
895 *
896 * rx_ring_tail is the position on the ring to process next. (Think of a snake, the head
897 * expands as the card adds new packets and we go around eating the tail processing the
898 * packets.)
899 *
900 * Undoubtably it could be streamlined and improved upon, but at the moment it works
901 * and the fast path through the routine is fine.
902 *
903 * adv_rx_ring could be inlined to increase performance, but its called a *lot* of times
904 * in xl_rx so would increase the size of the function significantly.
905 */
906
907 static void adv_rx_ring(struct net_device *dev) /* Advance rx_ring, cut down on bloat in xl_rx */
908 {
909 struct xl_private *xl_priv=netdev_priv(dev);
910 int n = xl_priv->rx_ring_tail;
911 int prev_ring_loc;
912
913 prev_ring_loc = (n + XL_RX_RING_SIZE - 1) & (XL_RX_RING_SIZE - 1);
914 xl_priv->xl_rx_ring[prev_ring_loc].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * n));
915 xl_priv->xl_rx_ring[n].framestatus = 0;
916 xl_priv->xl_rx_ring[n].upnextptr = 0;
917 xl_priv->rx_ring_tail++;
918 xl_priv->rx_ring_tail &= (XL_RX_RING_SIZE-1);
919 }
920
921 static void xl_rx(struct net_device *dev)
922 {
923 struct xl_private *xl_priv=netdev_priv(dev);
924 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
925 struct sk_buff *skb, *skb2 ;
926 int frame_length = 0, copy_len = 0 ;
927 int temp_ring_loc ;
928
929 /*
930 * Receive the next frame, loop around the ring until all frames
931 * have been received.
932 */
933
934 while (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & (RXUPDCOMPLETE | RXUPDFULL) ) { /* Descriptor to process */
935
936 if (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & RXUPDFULL ) { /* UpdFull, Multiple Descriptors used for the frame */
937
938 /*
939 * This is a pain, you need to go through all the descriptors until the last one
940 * for this frame to find the framelength
941 */
942
943 temp_ring_loc = xl_priv->rx_ring_tail ;
944
945 while (xl_priv->xl_rx_ring[temp_ring_loc].framestatus & RXUPDFULL ) {
946 temp_ring_loc++ ;
947 temp_ring_loc &= (XL_RX_RING_SIZE-1) ;
948 }
949
950 frame_length = le32_to_cpu(xl_priv->xl_rx_ring[temp_ring_loc].framestatus) & 0x7FFF;
951
952 skb = dev_alloc_skb(frame_length) ;
953
954 if (skb==NULL) { /* No memory for frame, still need to roll forward the rx ring */
955 printk(KERN_WARNING "%s: dev_alloc_skb failed - multi buffer !\n", dev->name) ;
956 while (xl_priv->rx_ring_tail != temp_ring_loc)
957 adv_rx_ring(dev) ;
958
959 adv_rx_ring(dev) ; /* One more time just for luck :) */
960 dev->stats.rx_dropped++ ;
961
962 writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
963 return ;
964 }
965
966 while (xl_priv->rx_ring_tail != temp_ring_loc) {
967 copy_len = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen) & 0x7FFF;
968 frame_length -= copy_len ;
969 pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
970 skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail],
971 skb_put(skb, copy_len),
972 copy_len);
973 pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
974 adv_rx_ring(dev) ;
975 }
976
977 /* Now we have found the last fragment */
978 pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
979 skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail],
980 skb_put(skb,copy_len), frame_length);
981 /* memcpy(skb_put(skb,frame_length), bus_to_virt(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), frame_length) ; */
982 pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE);
983 adv_rx_ring(dev) ;
984 skb->protocol = tr_type_trans(skb,dev) ;
985 netif_rx(skb) ;
986
987 } else { /* Single Descriptor Used, simply swap buffers over, fast path */
988
989 frame_length = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus) & 0x7FFF;
990
991 skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ;
992
993 if (skb==NULL) { /* Still need to fix the rx ring */
994 printk(KERN_WARNING "%s: dev_alloc_skb failed in rx, single buffer\n",dev->name);
995 adv_rx_ring(dev) ;
996 dev->stats.rx_dropped++ ;
997 writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
998 return ;
999 }
1000
1001 skb2 = xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] ;
1002 pci_unmap_single(xl_priv->pdev, le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
1003 skb_put(skb2, frame_length) ;
1004 skb2->protocol = tr_type_trans(skb2,dev) ;
1005
1006 xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] = skb ;
1007 xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev,skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE));
1008 xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG;
1009 adv_rx_ring(dev) ;
1010 dev->stats.rx_packets++ ;
1011 dev->stats.rx_bytes += frame_length ;
1012
1013 netif_rx(skb2) ;
1014 } /* if multiple buffers */
1015 } /* while packet to do */
1016
1017 /* Clear the updComplete interrupt */
1018 writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
1019 return ;
1020 }
1021
1022 /*
1023 * This is ruthless, it doesn't care what state the card is in it will
1024 * completely reset the adapter.
1025 */
1026
1027 static void xl_reset(struct net_device *dev)
1028 {
1029 struct xl_private *xl_priv=netdev_priv(dev);
1030 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1031 unsigned long t;
1032
1033 writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
1034
1035 /*
1036 * Must wait for cmdInProgress bit (12) to clear before continuing with
1037 * card configuration.
1038 */
1039
1040 t=jiffies;
1041 while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
1042 if (time_after(jiffies, t + 40 * HZ)) {
1043 printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n");
1044 break ;
1045 }
1046 }
1047
1048 }
1049
1050 static void xl_freemem(struct net_device *dev)
1051 {
1052 struct xl_private *xl_priv=netdev_priv(dev);
1053 int i ;
1054
1055 for (i=0;i<XL_RX_RING_SIZE;i++) {
1056 dev_kfree_skb_irq(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail]) ;
1057 pci_unmap_single(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE);
1058 xl_priv->rx_ring_tail++ ;
1059 xl_priv->rx_ring_tail &= XL_RX_RING_SIZE-1;
1060 }
1061
1062 /* unmap ring */
1063 pci_unmap_single(xl_priv->pdev,xl_priv->rx_ring_dma_addr, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_FROMDEVICE) ;
1064
1065 pci_unmap_single(xl_priv->pdev,xl_priv->tx_ring_dma_addr, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE, PCI_DMA_TODEVICE) ;
1066
1067 kfree(xl_priv->xl_rx_ring) ;
1068 kfree(xl_priv->xl_tx_ring) ;
1069
1070 return ;
1071 }
1072
1073 static irqreturn_t xl_interrupt(int irq, void *dev_id)
1074 {
1075 struct net_device *dev = (struct net_device *)dev_id;
1076 struct xl_private *xl_priv =netdev_priv(dev);
1077 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1078 u16 intstatus, macstatus ;
1079
1080 intstatus = readw(xl_mmio + MMIO_INTSTATUS) ;
1081
1082 if (!(intstatus & 1)) /* We didn't generate the interrupt */
1083 return IRQ_NONE;
1084
1085 spin_lock(&xl_priv->xl_lock) ;
1086
1087 /*
1088 * Process the interrupt
1089 */
1090 /*
1091 * Something fishy going on here, we shouldn't get 0001 ints, not fatal though.
1092 */
1093 if (intstatus == 0x0001) {
1094 writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1095 printk(KERN_INFO "%s: 00001 int received\n",dev->name);
1096 } else {
1097 if (intstatus & (HOSTERRINT | SRBRINT | ARBCINT | UPCOMPINT | DNCOMPINT | HARDERRINT | (1<<8) | TXUNDERRUN | ASBFINT)) {
1098
1099 /*
1100 * Host Error.
1101 * It may be possible to recover from this, but usually it means something
1102 * is seriously fubar, so we just close the adapter.
1103 */
1104
1105 if (intstatus & HOSTERRINT) {
1106 printk(KERN_WARNING "%s: Host Error, performing global reset, intstatus = %04x\n",dev->name,intstatus);
1107 writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
1108 printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name);
1109 netif_stop_queue(dev) ;
1110 xl_freemem(dev) ;
1111 free_irq(dev->irq,dev);
1112 xl_reset(dev) ;
1113 writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1114 spin_unlock(&xl_priv->xl_lock) ;
1115 return IRQ_HANDLED;
1116 } /* Host Error */
1117
1118 if (intstatus & SRBRINT ) { /* Srbc interrupt */
1119 writel(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1120 if (xl_priv->srb_queued)
1121 xl_srb_bh(dev) ;
1122 } /* SRBR Interrupt */
1123
1124 if (intstatus & TXUNDERRUN) { /* Issue DnReset command */
1125 writel(DNRESET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1126 while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { /* Wait for command to run */
1127 /* !!! FIX-ME !!!!
1128 Must put a timeout check here ! */
1129 /* Empty Loop */
1130 }
1131 printk(KERN_WARNING "%s: TX Underrun received\n",dev->name);
1132 writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1133 } /* TxUnderRun */
1134
1135 if (intstatus & ARBCINT ) { /* Arbc interrupt */
1136 xl_arb_cmd(dev) ;
1137 } /* Arbc */
1138
1139 if (intstatus & ASBFINT) {
1140 if (xl_priv->asb_queued == 1) {
1141 xl_asb_cmd(dev) ;
1142 } else if (xl_priv->asb_queued == 2) {
1143 xl_asb_bh(dev) ;
1144 } else {
1145 writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
1146 }
1147 } /* Asbf */
1148
1149 if (intstatus & UPCOMPINT ) /* UpComplete */
1150 xl_rx(dev) ;
1151
1152 if (intstatus & DNCOMPINT ) /* DnComplete */
1153 xl_dn_comp(dev) ;
1154
1155 if (intstatus & HARDERRINT ) { /* Hardware error */
1156 writel(MMIO_WORD_READ | MACSTATUS, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1157 macstatus = readw(xl_mmio + MMIO_MACDATA) ;
1158 printk(KERN_WARNING "%s: MacStatusError, details: ", dev->name);
1159 if (macstatus & (1<<14))
1160 printk(KERN_WARNING "tchk error: Unrecoverable error\n");
1161 if (macstatus & (1<<3))
1162 printk(KERN_WARNING "eint error: Internal watchdog timer expired\n");
1163 if (macstatus & (1<<2))
1164 printk(KERN_WARNING "aint error: Host tried to perform invalid operation\n");
1165 printk(KERN_WARNING "Instatus = %02x, macstatus = %02x\n",intstatus,macstatus) ;
1166 printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name);
1167 netif_stop_queue(dev) ;
1168 xl_freemem(dev) ;
1169 free_irq(dev->irq,dev);
1170 unregister_netdev(dev) ;
1171 free_netdev(dev) ;
1172 xl_reset(dev) ;
1173 writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1174 spin_unlock(&xl_priv->xl_lock) ;
1175 return IRQ_HANDLED;
1176 }
1177 } else {
1178 printk(KERN_WARNING "%s: Received Unknown interrupt : %04x\n", dev->name, intstatus);
1179 writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1180 }
1181 }
1182
1183 /* Turn interrupts back on */
1184
1185 writel( SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
1186 writel( SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ;
1187
1188 spin_unlock(&xl_priv->xl_lock) ;
1189 return IRQ_HANDLED;
1190 }
1191
1192 /*
1193 * Tx - Polling configuration
1194 */
1195
1196 static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev)
1197 {
1198 struct xl_private *xl_priv=netdev_priv(dev);
1199 struct xl_tx_desc *txd ;
1200 int tx_head, tx_tail, tx_prev ;
1201 unsigned long flags ;
1202
1203 spin_lock_irqsave(&xl_priv->xl_lock,flags) ;
1204
1205 netif_stop_queue(dev) ;
1206
1207 if (xl_priv->free_ring_entries > 1 ) {
1208 /*
1209 * Set up the descriptor for the packet
1210 */
1211 tx_head = xl_priv->tx_ring_head ;
1212 tx_tail = xl_priv->tx_ring_tail ;
1213
1214 txd = &(xl_priv->xl_tx_ring[tx_head]) ;
1215 txd->dnnextptr = 0 ;
1216 txd->framestartheader = cpu_to_le32(skb->len) | TXDNINDICATE;
1217 txd->buffer = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE));
1218 txd->buffer_length = cpu_to_le32(skb->len) | TXDNFRAGLAST;
1219 xl_priv->tx_ring_skb[tx_head] = skb ;
1220 dev->stats.tx_packets++ ;
1221 dev->stats.tx_bytes += skb->len ;
1222
1223 /*
1224 * Set the nextptr of the previous descriptor equal to this descriptor, add XL_TX_RING_SIZE -1
1225 * to ensure no negative numbers in unsigned locations.
1226 */
1227
1228 tx_prev = (xl_priv->tx_ring_head + XL_TX_RING_SIZE - 1) & (XL_TX_RING_SIZE - 1) ;
1229
1230 xl_priv->tx_ring_head++ ;
1231 xl_priv->tx_ring_head &= (XL_TX_RING_SIZE - 1) ;
1232 xl_priv->free_ring_entries-- ;
1233
1234 xl_priv->xl_tx_ring[tx_prev].dnnextptr = cpu_to_le32(xl_priv->tx_ring_dma_addr + (sizeof (struct xl_tx_desc) * tx_head));
1235
1236 /* Sneaky, by doing a read on DnListPtr we can force the card to poll on the DnNextPtr */
1237 /* readl(xl_mmio + MMIO_DNLISTPTR) ; */
1238
1239 netif_wake_queue(dev) ;
1240
1241 spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ;
1242
1243 return NETDEV_TX_OK;
1244 } else {
1245 spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ;
1246 return NETDEV_TX_BUSY;
1247 }
1248
1249 }
1250
1251 /*
1252 * The NIC has told us that a packet has been downloaded onto the card, we must
1253 * find out which packet it has done, clear the skb and information for the packet
1254 * then advance around the ring for all tranmitted packets
1255 */
1256
1257 static void xl_dn_comp(struct net_device *dev)
1258 {
1259 struct xl_private *xl_priv=netdev_priv(dev);
1260 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1261 struct xl_tx_desc *txd ;
1262
1263
1264 if (xl_priv->tx_ring_tail == 255) {/* First time */
1265 xl_priv->xl_tx_ring[0].framestartheader = 0 ;
1266 xl_priv->xl_tx_ring[0].dnnextptr = 0 ;
1267 xl_priv->tx_ring_tail = 1 ;
1268 }
1269
1270 while (xl_priv->xl_tx_ring[xl_priv->tx_ring_tail].framestartheader & TXDNCOMPLETE ) {
1271 txd = &(xl_priv->xl_tx_ring[xl_priv->tx_ring_tail]) ;
1272 pci_unmap_single(xl_priv->pdev, le32_to_cpu(txd->buffer), xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]->len, PCI_DMA_TODEVICE);
1273 txd->framestartheader = 0 ;
1274 txd->buffer = cpu_to_le32(0xdeadbeef);
1275 txd->buffer_length = 0 ;
1276 dev_kfree_skb_irq(xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]) ;
1277 xl_priv->tx_ring_tail++ ;
1278 xl_priv->tx_ring_tail &= (XL_TX_RING_SIZE - 1) ;
1279 xl_priv->free_ring_entries++ ;
1280 }
1281
1282 netif_wake_queue(dev) ;
1283
1284 writel(ACK_INTERRUPT | DNCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
1285 }
1286
1287 /*
1288 * Close the adapter properly.
1289 * This srb reply cannot be handled from interrupt context as we have
1290 * to free the interrupt from the driver.
1291 */
1292
1293 static int xl_close(struct net_device *dev)
1294 {
1295 struct xl_private *xl_priv = netdev_priv(dev);
1296 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1297 unsigned long t ;
1298
1299 netif_stop_queue(dev) ;
1300
1301 /*
1302 * Close the adapter, need to stall the rx and tx queues.
1303 */
1304
1305 writew(DNSTALL, xl_mmio + MMIO_COMMAND) ;
1306 t=jiffies;
1307 while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
1308 schedule();
1309 if (time_after(jiffies, t + 10 * HZ)) {
1310 printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNSTALL not responding.\n", dev->name);
1311 break ;
1312 }
1313 }
1314 writew(DNDISABLE, xl_mmio + MMIO_COMMAND) ;
1315 t=jiffies;
1316 while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
1317 schedule();
1318 if (time_after(jiffies, t + 10 * HZ)) {
1319 printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNDISABLE not responding.\n", dev->name);
1320 break ;
1321 }
1322 }
1323 writew(UPSTALL, xl_mmio + MMIO_COMMAND) ;
1324 t=jiffies;
1325 while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
1326 schedule();
1327 if (time_after(jiffies, t + 10 * HZ)) {
1328 printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPSTALL not responding.\n", dev->name);
1329 break ;
1330 }
1331 }
1332
1333 /* Turn off interrupts, we will still get the indication though
1334 * so we can trap it
1335 */
1336
1337 writel(SETINTENABLE, xl_mmio + MMIO_COMMAND) ;
1338
1339 xl_srb_cmd(dev,CLOSE_NIC) ;
1340
1341 t=jiffies;
1342 while (!(readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) {
1343 schedule();
1344 if (time_after(jiffies, t + 10 * HZ)) {
1345 printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-CLOSENIC not responding.\n", dev->name);
1346 break ;
1347 }
1348 }
1349 /* Read the srb response from the adapter */
1350
1351 writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD);
1352 if (readb(xl_mmio + MMIO_MACDATA) != CLOSE_NIC) {
1353 printk(KERN_INFO "%s: CLOSE_NIC did not get a CLOSE_NIC response\n",dev->name);
1354 } else {
1355 writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1356 if (readb(xl_mmio + MMIO_MACDATA)==0) {
1357 printk(KERN_INFO "%s: Adapter has been closed\n",dev->name);
1358 writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1359
1360 xl_freemem(dev) ;
1361 free_irq(dev->irq,dev) ;
1362 } else {
1363 printk(KERN_INFO "%s: Close nic command returned error code %02x\n",dev->name, readb(xl_mmio + MMIO_MACDATA)) ;
1364 }
1365 }
1366
1367 /* Reset the upload and download logic */
1368
1369 writew(UPRESET, xl_mmio + MMIO_COMMAND) ;
1370 t=jiffies;
1371 while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
1372 schedule();
1373 if (time_after(jiffies, t + 10 * HZ)) {
1374 printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPRESET not responding.\n", dev->name);
1375 break ;
1376 }
1377 }
1378 writew(DNRESET, xl_mmio + MMIO_COMMAND) ;
1379 t=jiffies;
1380 while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) {
1381 schedule();
1382 if (time_after(jiffies, t + 10 * HZ)) {
1383 printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNRESET not responding.\n", dev->name);
1384 break ;
1385 }
1386 }
1387 xl_hw_reset(dev) ;
1388 return 0 ;
1389 }
1390
1391 static void xl_set_rx_mode(struct net_device *dev)
1392 {
1393 struct xl_private *xl_priv = netdev_priv(dev);
1394 struct netdev_hw_addr *ha;
1395 unsigned char dev_mc_address[4] ;
1396 u16 options ;
1397
1398 if (dev->flags & IFF_PROMISC)
1399 options = 0x0004 ;
1400 else
1401 options = 0x0000 ;
1402
1403 if (options ^ xl_priv->xl_copy_all_options) { /* Changed, must send command */
1404 xl_priv->xl_copy_all_options = options ;
1405 xl_srb_cmd(dev, SET_RECEIVE_MODE) ;
1406 return ;
1407 }
1408
1409 dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ;
1410
1411 netdev_for_each_mc_addr(ha, dev) {
1412 dev_mc_address[0] |= ha->addr[2];
1413 dev_mc_address[1] |= ha->addr[3];
1414 dev_mc_address[2] |= ha->addr[4];
1415 dev_mc_address[3] |= ha->addr[5];
1416 }
1417
1418 if (memcmp(xl_priv->xl_functional_addr,dev_mc_address,4) != 0) { /* Options have changed, run the command */
1419 memcpy(xl_priv->xl_functional_addr, dev_mc_address,4) ;
1420 xl_srb_cmd(dev, SET_FUNC_ADDRESS) ;
1421 }
1422 return ;
1423 }
1424
1425
1426 /*
1427 * We issued an srb command and now we must read
1428 * the response from the completed command.
1429 */
1430
1431 static void xl_srb_bh(struct net_device *dev)
1432 {
1433 struct xl_private *xl_priv = netdev_priv(dev);
1434 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1435 u8 srb_cmd, ret_code ;
1436 int i ;
1437
1438 writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1439 srb_cmd = readb(xl_mmio + MMIO_MACDATA) ;
1440 writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1441 ret_code = readb(xl_mmio + MMIO_MACDATA) ;
1442
1443 /* Ret_code is standard across all commands */
1444
1445 switch (ret_code) {
1446 case 1:
1447 printk(KERN_INFO "%s: Command: %d - Invalid Command code\n",dev->name,srb_cmd) ;
1448 break ;
1449 case 4:
1450 printk(KERN_INFO "%s: Command: %d - Adapter is closed, must be open for this command\n",dev->name,srb_cmd);
1451 break ;
1452
1453 case 6:
1454 printk(KERN_INFO "%s: Command: %d - Options Invalid for command\n",dev->name,srb_cmd);
1455 break ;
1456
1457 case 0: /* Successful command execution */
1458 switch (srb_cmd) {
1459 case READ_LOG: /* Returns 14 bytes of data from the NIC */
1460 if(xl_priv->xl_message_level)
1461 printk(KERN_INFO "%s: READ.LOG 14 bytes of data ",dev->name) ;
1462 /*
1463 * We still have to read the log even if message_level = 0 and we don't want
1464 * to see it
1465 */
1466 for (i=0;i<14;i++) {
1467 writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1468 if(xl_priv->xl_message_level)
1469 printk("%02x:",readb(xl_mmio + MMIO_MACDATA)) ;
1470 }
1471 printk("\n") ;
1472 break ;
1473 case SET_FUNC_ADDRESS:
1474 if(xl_priv->xl_message_level)
1475 printk(KERN_INFO "%s: Functional Address Set\n",dev->name);
1476 break ;
1477 case CLOSE_NIC:
1478 if(xl_priv->xl_message_level)
1479 printk(KERN_INFO "%s: Received CLOSE_NIC interrupt in interrupt handler\n",dev->name);
1480 break ;
1481 case SET_MULTICAST_MODE:
1482 if(xl_priv->xl_message_level)
1483 printk(KERN_INFO "%s: Multicast options successfully changed\n",dev->name) ;
1484 break ;
1485 case SET_RECEIVE_MODE:
1486 if(xl_priv->xl_message_level) {
1487 if (xl_priv->xl_copy_all_options == 0x0004)
1488 printk(KERN_INFO "%s: Entering promiscuous mode\n", dev->name);
1489 else
1490 printk(KERN_INFO "%s: Entering normal receive mode\n",dev->name);
1491 }
1492 break ;
1493
1494 } /* switch */
1495 break ;
1496 } /* switch */
1497 return ;
1498 }
1499
1500 static int xl_set_mac_address (struct net_device *dev, void *addr)
1501 {
1502 struct sockaddr *saddr = addr ;
1503 struct xl_private *xl_priv = netdev_priv(dev);
1504
1505 if (netif_running(dev)) {
1506 printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ;
1507 return -EIO ;
1508 }
1509
1510 memcpy(xl_priv->xl_laa, saddr->sa_data,dev->addr_len) ;
1511
1512 if (xl_priv->xl_message_level) {
1513 printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, xl_priv->xl_laa[0],
1514 xl_priv->xl_laa[1], xl_priv->xl_laa[2],
1515 xl_priv->xl_laa[3], xl_priv->xl_laa[4],
1516 xl_priv->xl_laa[5]);
1517 }
1518
1519 return 0 ;
1520 }
1521
1522 static void xl_arb_cmd(struct net_device *dev)
1523 {
1524 struct xl_private *xl_priv = netdev_priv(dev);
1525 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1526 u8 arb_cmd ;
1527 u16 lan_status, lan_status_diff ;
1528
1529 writel( ( MEM_BYTE_READ | 0xD0000 | xl_priv->arb), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1530 arb_cmd = readb(xl_mmio + MMIO_MACDATA) ;
1531
1532 if (arb_cmd == RING_STATUS_CHANGE) { /* Ring.Status.Change */
1533 writel( ( (MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1534
1535 printk(KERN_INFO "%s: Ring Status Change: New Status = %04x\n", dev->name, swab16(readw(xl_mmio + MMIO_MACDATA) )) ;
1536
1537 lan_status = swab16(readw(xl_mmio + MMIO_MACDATA));
1538
1539 /* Acknowledge interrupt, this tells nic we are done with the arb */
1540 writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1541
1542 lan_status_diff = xl_priv->xl_lan_status ^ lan_status ;
1543
1544 if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) {
1545 if (lan_status_diff & LSC_LWF)
1546 printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name);
1547 if (lan_status_diff & LSC_ARW)
1548 printk(KERN_WARNING "%s: Auto removal error\n",dev->name);
1549 if (lan_status_diff & LSC_FPE)
1550 printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name);
1551 if (lan_status_diff & LSC_RR)
1552 printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name);
1553
1554 /* Adapter has been closed by the hardware */
1555
1556 netif_stop_queue(dev);
1557 xl_freemem(dev) ;
1558 free_irq(dev->irq,dev);
1559
1560 printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name);
1561 } /* If serious error */
1562
1563 if (xl_priv->xl_message_level) {
1564 if (lan_status_diff & LSC_SIG_LOSS)
1565 printk(KERN_WARNING "%s: No receive signal detected\n", dev->name);
1566 if (lan_status_diff & LSC_HARD_ERR)
1567 printk(KERN_INFO "%s: Beaconing\n",dev->name);
1568 if (lan_status_diff & LSC_SOFT_ERR)
1569 printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
1570 if (lan_status_diff & LSC_TRAN_BCN)
1571 printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
1572 if (lan_status_diff & LSC_SS)
1573 printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
1574 if (lan_status_diff & LSC_RING_REC)
1575 printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
1576 if (lan_status_diff & LSC_FDX_MODE)
1577 printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name);
1578 }
1579
1580 if (lan_status_diff & LSC_CO) {
1581 if (xl_priv->xl_message_level)
1582 printk(KERN_INFO "%s: Counter Overflow\n", dev->name);
1583 /* Issue READ.LOG command */
1584 xl_srb_cmd(dev, READ_LOG) ;
1585 }
1586
1587 /* There is no command in the tech docs to issue the read_sr_counters */
1588 if (lan_status_diff & LSC_SR_CO) {
1589 if (xl_priv->xl_message_level)
1590 printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name);
1591 }
1592
1593 xl_priv->xl_lan_status = lan_status ;
1594
1595 } /* Lan.change.status */
1596 else if ( arb_cmd == RECEIVE_DATA) { /* Received.Data */
1597 #if XL_DEBUG
1598 printk(KERN_INFO "Received.Data\n");
1599 #endif
1600 writel( ((MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1601 xl_priv->mac_buffer = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
1602
1603 /* Now we are going to be really basic here and not do anything
1604 * with the data at all. The tech docs do not give me enough
1605 * information to calculate the buffers properly so we're
1606 * just going to tell the nic that we've dealt with the frame
1607 * anyway.
1608 */
1609
1610 /* Acknowledge interrupt, this tells nic we are done with the arb */
1611 writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
1612
1613 /* Is the ASB free ? */
1614
1615 xl_priv->asb_queued = 0 ;
1616 writel( ((MEM_BYTE_READ | 0xD0000 | xl_priv->asb) + 2), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1617 if (readb(xl_mmio + MMIO_MACDATA) != 0xff) {
1618 xl_priv->asb_queued = 1 ;
1619
1620 xl_wait_misr_flags(dev) ;
1621
1622 writel(MEM_BYTE_WRITE | MF_ASBFR, xl_mmio + MMIO_MAC_ACCESS_CMD);
1623 writeb(0xff, xl_mmio + MMIO_MACDATA) ;
1624 writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1625 writeb(MISR_ASBFR, xl_mmio + MMIO_MACDATA) ;
1626 return ;
1627 /* Drop out and wait for the bottom half to be run */
1628 }
1629
1630 xl_asb_cmd(dev) ;
1631
1632 } else {
1633 printk(KERN_WARNING "%s: Received unknown arb (xl_priv) command: %02x\n",dev->name,arb_cmd);
1634 }
1635
1636 /* Acknowledge the arb interrupt */
1637
1638 writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
1639
1640 return ;
1641 }
1642
1643
1644 /*
1645 * There is only one asb command, but we can get called from different
1646 * places.
1647 */
1648
1649 static void xl_asb_cmd(struct net_device *dev)
1650 {
1651 struct xl_private *xl_priv = netdev_priv(dev);
1652 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1653
1654 if (xl_priv->asb_queued == 1)
1655 writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
1656
1657 writel(MEM_BYTE_WRITE | 0xd0000 | xl_priv->asb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1658 writeb(0x81, xl_mmio + MMIO_MACDATA) ;
1659
1660 writel(MEM_WORD_WRITE | 0xd0000 | xl_priv->asb | 6, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1661 writew(swab16(xl_priv->mac_buffer), xl_mmio + MMIO_MACDATA) ;
1662
1663 xl_wait_misr_flags(dev) ;
1664
1665 writel(MEM_BYTE_WRITE | MF_RASB, xl_mmio + MMIO_MAC_ACCESS_CMD);
1666 writeb(0xff, xl_mmio + MMIO_MACDATA) ;
1667
1668 writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1669 writeb(MISR_RASB, xl_mmio + MMIO_MACDATA) ;
1670
1671 xl_priv->asb_queued = 2 ;
1672
1673 return ;
1674 }
1675
1676 /*
1677 * This will only get called if there was an error
1678 * from the asb cmd.
1679 */
1680 static void xl_asb_bh(struct net_device *dev)
1681 {
1682 struct xl_private *xl_priv = netdev_priv(dev);
1683 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1684 u8 ret_code ;
1685
1686 writel(MMIO_BYTE_READ | 0xd0000 | xl_priv->asb | 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1687 ret_code = readb(xl_mmio + MMIO_MACDATA) ;
1688 switch (ret_code) {
1689 case 0x01:
1690 printk(KERN_INFO "%s: ASB Command, unrecognized command code\n",dev->name);
1691 break ;
1692 case 0x26:
1693 printk(KERN_INFO "%s: ASB Command, unexpected receive buffer\n", dev->name);
1694 break ;
1695 case 0x40:
1696 printk(KERN_INFO "%s: ASB Command, Invalid Station ID\n", dev->name);
1697 break ;
1698 }
1699 xl_priv->asb_queued = 0 ;
1700 writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ;
1701 return ;
1702 }
1703
1704 /*
1705 * Issue srb commands to the nic
1706 */
1707
1708 static void xl_srb_cmd(struct net_device *dev, int srb_cmd)
1709 {
1710 struct xl_private *xl_priv = netdev_priv(dev);
1711 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1712
1713 switch (srb_cmd) {
1714 case READ_LOG:
1715 writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1716 writeb(READ_LOG, xl_mmio + MMIO_MACDATA) ;
1717 break;
1718
1719 case CLOSE_NIC:
1720 writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1721 writeb(CLOSE_NIC, xl_mmio + MMIO_MACDATA) ;
1722 break ;
1723
1724 case SET_RECEIVE_MODE:
1725 writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1726 writeb(SET_RECEIVE_MODE, xl_mmio + MMIO_MACDATA) ;
1727 writel(MEM_WORD_WRITE | 0xD0000 | xl_priv->srb | 4, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1728 writew(xl_priv->xl_copy_all_options, xl_mmio + MMIO_MACDATA) ;
1729 break ;
1730
1731 case SET_FUNC_ADDRESS:
1732 writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1733 writeb(SET_FUNC_ADDRESS, xl_mmio + MMIO_MACDATA) ;
1734 writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 6 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1735 writeb(xl_priv->xl_functional_addr[0], xl_mmio + MMIO_MACDATA) ;
1736 writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 7 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1737 writeb(xl_priv->xl_functional_addr[1], xl_mmio + MMIO_MACDATA) ;
1738 writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 8 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1739 writeb(xl_priv->xl_functional_addr[2], xl_mmio + MMIO_MACDATA) ;
1740 writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 9 , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1741 writeb(xl_priv->xl_functional_addr[3], xl_mmio + MMIO_MACDATA) ;
1742 break ;
1743 } /* switch */
1744
1745
1746 xl_wait_misr_flags(dev) ;
1747
1748 /* Write 0xff to the CSRB flag */
1749 writel(MEM_BYTE_WRITE | MF_CSRB , xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1750 writeb(0xFF, xl_mmio + MMIO_MACDATA) ;
1751 /* Set csrb bit in MISR register to process command */
1752 writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1753 writeb(MISR_CSRB, xl_mmio + MMIO_MACDATA) ;
1754 xl_priv->srb_queued = 1 ;
1755
1756 return ;
1757 }
1758
1759 /*
1760 * This is nasty, to use the MISR command you have to wait for 6 memory locations
1761 * to be zero. This is the way the driver does on other OS'es so we should be ok with
1762 * the empty loop.
1763 */
1764
1765 static void xl_wait_misr_flags(struct net_device *dev)
1766 {
1767 struct xl_private *xl_priv = netdev_priv(dev);
1768 u8 __iomem * xl_mmio = xl_priv->xl_mmio ;
1769
1770 int i ;
1771
1772 writel(MMIO_BYTE_READ | MISR_RW, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1773 if (readb(xl_mmio + MMIO_MACDATA) != 0) { /* Misr not clear */
1774 for (i=0; i<6; i++) {
1775 writel(MEM_BYTE_READ | 0xDFFE0 | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1776 while (readb(xl_mmio + MMIO_MACDATA) != 0 ) {} ; /* Empty Loop */
1777 }
1778 }
1779
1780 writel(MMIO_BYTE_WRITE | MISR_AND, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
1781 writeb(0x80, xl_mmio + MMIO_MACDATA) ;
1782
1783 return ;
1784 }
1785
1786 /*
1787 * Change mtu size, this should work the same as olympic
1788 */
1789
1790 static int xl_change_mtu(struct net_device *dev, int mtu)
1791 {
1792 struct xl_private *xl_priv = netdev_priv(dev);
1793 u16 max_mtu ;
1794
1795 if (xl_priv->xl_ring_speed == 4)
1796 max_mtu = 4500 ;
1797 else
1798 max_mtu = 18000 ;
1799
1800 if (mtu > max_mtu)
1801 return -EINVAL ;
1802 if (mtu < 100)
1803 return -EINVAL ;
1804
1805 dev->mtu = mtu ;
1806 xl_priv->pkt_buf_sz = mtu + TR_HLEN ;
1807
1808 return 0 ;
1809 }
1810
1811 static void __devexit xl_remove_one (struct pci_dev *pdev)
1812 {
1813 struct net_device *dev = pci_get_drvdata(pdev);
1814 struct xl_private *xl_priv=netdev_priv(dev);
1815
1816 release_firmware(xl_priv->fw);
1817 unregister_netdev(dev);
1818 iounmap(xl_priv->xl_mmio) ;
1819 pci_release_regions(pdev) ;
1820 pci_set_drvdata(pdev,NULL) ;
1821 free_netdev(dev);
1822 return ;
1823 }
1824
1825 static struct pci_driver xl_3c359_driver = {
1826 .name = "3c359",
1827 .id_table = xl_pci_tbl,
1828 .probe = xl_probe,
1829 .remove = __devexit_p(xl_remove_one),
1830 };
1831
1832 static int __init xl_pci_init (void)
1833 {
1834 return pci_register_driver(&xl_3c359_driver);
1835 }
1836
1837
1838 static void __exit xl_pci_cleanup (void)
1839 {
1840 pci_unregister_driver (&xl_3c359_driver);
1841 }
1842
1843 module_init(xl_pci_init);
1844 module_exit(xl_pci_cleanup);
1845
1846 MODULE_LICENSE("GPL") ;
Linux with added FPC-III support