2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * Copyright (C) 2004-2007 Cavium Networks
7 * Copyright (C) 2008, 2009 Wind River Systems
8 * written by Ralf Baechle <ralf@linux-mips.org>
10 #include <linux/compiler.h>
11 #include <linux/vmalloc.h>
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/console.h>
15 #include <linux/delay.h>
16 #include <linux/export.h>
17 #include <linux/interrupt.h>
19 #include <linux/serial.h>
20 #include <linux/smp.h>
21 #include <linux/types.h>
22 #include <linux/string.h> /* for memset */
23 #include <linux/tty.h>
24 #include <linux/time.h>
25 #include <linux/platform_device.h>
26 #include <linux/serial_core.h>
27 #include <linux/serial_8250.h>
28 #include <linux/of_fdt.h>
29 #include <linux/libfdt.h>
30 #include <linux/kexec.h>
32 #include <asm/processor.h>
33 #include <asm/reboot.h>
34 #include <asm/smp-ops.h>
35 #include <asm/irq_cpu.h>
36 #include <asm/mipsregs.h>
37 #include <asm/bootinfo.h>
38 #include <asm/sections.h>
41 #include <asm/octeon/octeon.h>
42 #include <asm/octeon/pci-octeon.h>
43 #include <asm/octeon/cvmx-rst-defs.h>
46 * TRUE for devices having registers with little-endian byte
47 * order, FALSE for registers with native-endian byte order.
48 * PCI mandates little-endian, USB and SATA are configuraable,
49 * but we chose little-endian for these.
51 const bool octeon_should_swizzle_table
[256] = {
52 [0x00] = true, /* bootbus/CF */
53 [0x1b] = true, /* PCI mmio window */
54 [0x1c] = true, /* PCI mmio window */
55 [0x1d] = true, /* PCI mmio window */
56 [0x1e] = true, /* PCI mmio window */
57 [0x68] = true, /* OCTEON III USB */
58 [0x69] = true, /* OCTEON III USB */
59 [0x6c] = true, /* OCTEON III SATA */
60 [0x6f] = true, /* OCTEON II USB */
62 EXPORT_SYMBOL(octeon_should_swizzle_table
);
65 extern void pci_console_init(const char *arg
);
68 static unsigned long long max_memory
= ULLONG_MAX
;
69 static unsigned long long reserve_low_mem
;
71 DEFINE_SEMAPHORE(octeon_bootbus_sem
);
72 EXPORT_SYMBOL(octeon_bootbus_sem
);
74 struct octeon_boot_descriptor
*octeon_boot_desc_ptr
;
76 struct cvmx_bootinfo
*octeon_bootinfo
;
77 EXPORT_SYMBOL(octeon_bootinfo
);
82 * Wait for relocation code is prepared and send
83 * secondary CPUs to spin until kernel is relocated.
85 static void octeon_kexec_smp_down(void *ignored
)
87 int cpu
= smp_processor_id();
90 set_cpu_online(cpu
, false);
91 while (!atomic_read(&kexec_ready_to_reboot
))
98 relocated_kexec_smp_wait(NULL
);
102 #define OCTEON_DDR0_BASE (0x0ULL)
103 #define OCTEON_DDR0_SIZE (0x010000000ULL)
104 #define OCTEON_DDR1_BASE (0x410000000ULL)
105 #define OCTEON_DDR1_SIZE (0x010000000ULL)
106 #define OCTEON_DDR2_BASE (0x020000000ULL)
107 #define OCTEON_DDR2_SIZE (0x3e0000000ULL)
108 #define OCTEON_MAX_PHY_MEM_SIZE (16*1024*1024*1024ULL)
110 static struct kimage
*kimage_ptr
;
112 static void kexec_bootmem_init(uint64_t mem_size
, uint32_t low_reserved_bytes
)
115 struct cvmx_bootmem_desc
*bootmem_desc
;
117 bootmem_desc
= cvmx_bootmem_get_desc();
119 if (mem_size
> OCTEON_MAX_PHY_MEM_SIZE
) {
120 mem_size
= OCTEON_MAX_PHY_MEM_SIZE
;
121 pr_err("Error: requested memory too large,"
122 "truncating to maximum size\n");
125 bootmem_desc
->major_version
= CVMX_BOOTMEM_DESC_MAJ_VER
;
126 bootmem_desc
->minor_version
= CVMX_BOOTMEM_DESC_MIN_VER
;
128 addr
= (OCTEON_DDR0_BASE
+ reserve_low_mem
+ low_reserved_bytes
);
129 bootmem_desc
->head_addr
= 0;
131 if (mem_size
<= OCTEON_DDR0_SIZE
) {
132 __cvmx_bootmem_phy_free(addr
,
133 mem_size
- reserve_low_mem
-
134 low_reserved_bytes
, 0);
138 __cvmx_bootmem_phy_free(addr
,
139 OCTEON_DDR0_SIZE
- reserve_low_mem
-
140 low_reserved_bytes
, 0);
142 mem_size
-= OCTEON_DDR0_SIZE
;
144 if (mem_size
> OCTEON_DDR1_SIZE
) {
145 __cvmx_bootmem_phy_free(OCTEON_DDR1_BASE
, OCTEON_DDR1_SIZE
, 0);
146 __cvmx_bootmem_phy_free(OCTEON_DDR2_BASE
,
147 mem_size
- OCTEON_DDR1_SIZE
, 0);
149 __cvmx_bootmem_phy_free(OCTEON_DDR1_BASE
, mem_size
, 0);
152 static int octeon_kexec_prepare(struct kimage
*image
)
155 char *bootloader
= "kexec";
157 octeon_boot_desc_ptr
->argc
= 0;
158 for (i
= 0; i
< image
->nr_segments
; i
++) {
159 if (!strncmp(bootloader
, (char *)image
->segment
[i
].buf
,
160 strlen(bootloader
))) {
162 * convert command line string to array
163 * of parameters (as bootloader does).
166 char *str
= (char *)image
->segment
[i
].buf
;
167 char *ptr
= strchr(str
, ' ');
168 while (ptr
&& (OCTEON_ARGV_MAX_ARGS
> argc
)) {
171 offt
= (int)(ptr
- str
+ 1);
172 octeon_boot_desc_ptr
->argv
[argc
] =
173 image
->segment
[i
].mem
+ offt
;
176 ptr
= strchr(ptr
+ 1, ' ');
178 octeon_boot_desc_ptr
->argc
= argc
;
184 * Information about segments will be needed during pre-boot memory
191 static void octeon_generic_shutdown(void)
197 struct cvmx_bootmem_desc
*bootmem_desc
;
198 void *named_block_array_ptr
;
200 bootmem_desc
= cvmx_bootmem_get_desc();
201 named_block_array_ptr
=
202 cvmx_phys_to_ptr(bootmem_desc
->named_block_array_addr
);
205 /* disable watchdogs */
206 for_each_online_cpu(cpu
)
207 cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu
)), 0);
209 cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
211 if (kimage_ptr
!= kexec_crash_image
) {
212 memset(named_block_array_ptr
,
214 CVMX_BOOTMEM_NUM_NAMED_BLOCKS
*
215 sizeof(struct cvmx_bootmem_named_block_desc
));
217 * Mark all memory (except low 0x100000 bytes) as free.
218 * It is the same thing that bootloader does.
220 kexec_bootmem_init(octeon_bootinfo
->dram_size
*1024ULL*1024ULL,
223 * Allocate all segments to avoid their corruption during boot.
225 for (i
= 0; i
< kimage_ptr
->nr_segments
; i
++)
226 cvmx_bootmem_alloc_address(
227 kimage_ptr
->segment
[i
].memsz
+ 2*PAGE_SIZE
,
228 kimage_ptr
->segment
[i
].mem
- PAGE_SIZE
,
232 * Do not mark all memory as free. Free only named sections
233 * leaving the rest of memory unchanged.
235 struct cvmx_bootmem_named_block_desc
*ptr
=
236 (struct cvmx_bootmem_named_block_desc
*)
237 named_block_array_ptr
;
239 for (i
= 0; i
< bootmem_desc
->named_block_num_blocks
; i
++)
241 cvmx_bootmem_free_named(ptr
[i
].name
);
243 kexec_args
[2] = 1UL; /* running on octeon_main_processor */
244 kexec_args
[3] = (unsigned long)octeon_boot_desc_ptr
;
246 secondary_kexec_args
[2] = 0UL; /* running on secondary cpu */
247 secondary_kexec_args
[3] = (unsigned long)octeon_boot_desc_ptr
;
251 static void octeon_shutdown(void)
253 octeon_generic_shutdown();
255 smp_call_function(octeon_kexec_smp_down
, NULL
, 0);
257 while (num_online_cpus() > 1) {
264 static void octeon_crash_shutdown(struct pt_regs
*regs
)
266 octeon_generic_shutdown();
267 default_machine_crash_shutdown(regs
);
271 void octeon_crash_smp_send_stop(void)
275 /* disable watchdogs */
276 for_each_online_cpu(cpu
)
277 cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu
)), 0);
281 #endif /* CONFIG_KEXEC */
283 #ifdef CONFIG_CAVIUM_RESERVE32
284 uint64_t octeon_reserve32_memory
;
285 EXPORT_SYMBOL(octeon_reserve32_memory
);
289 /* crashkernel cmdline parameter is parsed _after_ memory setup
290 * we also parse it here (workaround for EHB5200) */
291 static uint64_t crashk_size
, crashk_base
;
294 static int octeon_uart
;
296 extern asmlinkage
void handle_int(void);
299 * Return non zero if we are currently running in the Octeon simulator
303 int octeon_is_simulation(void)
305 return octeon_bootinfo
->board_type
== CVMX_BOARD_TYPE_SIM
;
307 EXPORT_SYMBOL(octeon_is_simulation
);
310 * Return true if Octeon is in PCI Host mode. This means
311 * Linux can control the PCI bus.
313 * Returns Non zero if Octeon in host mode.
315 int octeon_is_pci_host(void)
318 return octeon_bootinfo
->config_flags
& CVMX_BOOTINFO_CFG_FLAG_PCI_HOST
;
325 * Get the clock rate of Octeon
327 * Returns Clock rate in HZ
329 uint64_t octeon_get_clock_rate(void)
331 struct cvmx_sysinfo
*sysinfo
= cvmx_sysinfo_get();
333 return sysinfo
->cpu_clock_hz
;
335 EXPORT_SYMBOL(octeon_get_clock_rate
);
337 static u64 octeon_io_clock_rate
;
339 u64
octeon_get_io_clock_rate(void)
341 return octeon_io_clock_rate
;
343 EXPORT_SYMBOL(octeon_get_io_clock_rate
);
347 * Write to the LCD display connected to the bootbus. This display
348 * exists on most Cavium evaluation boards. If it doesn't exist, then
349 * this function doesn't do anything.
351 * @s: String to write
353 void octeon_write_lcd(const char *s
)
355 if (octeon_bootinfo
->led_display_base_addr
) {
356 void __iomem
*lcd_address
=
357 ioremap_nocache(octeon_bootinfo
->led_display_base_addr
,
360 for (i
= 0; i
< 8; i
++, s
++) {
362 iowrite8(*s
, lcd_address
+ i
);
364 iowrite8(' ', lcd_address
+ i
);
366 iounmap(lcd_address
);
371 * Return the console uart passed by the bootloader
373 * Returns uart (0 or 1)
375 int octeon_get_boot_uart(void)
377 return (octeon_boot_desc_ptr
->flags
& OCTEON_BL_FLAG_CONSOLE_UART1
) ?
382 * Get the coremask Linux was booted on.
386 int octeon_get_boot_coremask(void)
388 return octeon_boot_desc_ptr
->core_mask
;
392 * Check the hardware BIST results for a CPU
394 void octeon_check_cpu_bist(void)
396 const int coreid
= cvmx_get_core_num();
397 unsigned long long mask
;
398 unsigned long long bist_val
;
400 /* Check BIST results for COP0 registers */
401 mask
= 0x1f00000000ull
;
402 bist_val
= read_octeon_c0_icacheerr();
404 pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n",
407 bist_val
= read_octeon_c0_dcacheerr();
409 pr_err("Core%d L1 Dcache parity error: "
410 "CacheErr(dcache) = 0x%llx\n",
413 mask
= 0xfc00000000000000ull
;
414 bist_val
= read_c0_cvmmemctl();
416 pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n",
419 write_octeon_c0_dcacheerr(0);
425 * @command: Command to pass to the bootloader. Currently ignored.
427 static void octeon_restart(char *command
)
429 /* Disable all watchdogs before soft reset. They don't get cleared */
432 for_each_online_cpu(cpu
)
433 cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu
)), 0);
435 cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
440 if (OCTEON_IS_OCTEON3())
441 cvmx_write_csr(CVMX_RST_SOFT_RST
, 1);
443 cvmx_write_csr(CVMX_CIU_SOFT_RST
, 1);
448 * Permanently stop a core.
452 static void octeon_kill_core(void *arg
)
454 if (octeon_is_simulation())
455 /* A break instruction causes the simulator stop a core */
456 asm volatile ("break" ::: "memory");
459 /* Disable watchdog on this core. */
460 cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
461 /* Spin in a low power mode. */
463 asm volatile ("wait" ::: "memory");
470 static void octeon_halt(void)
472 smp_call_function(octeon_kill_core
, NULL
, 0);
474 switch (octeon_bootinfo
->board_type
) {
475 case CVMX_BOARD_TYPE_NAO38
:
476 /* Driving a 1 to GPIO 12 shuts off this board */
477 cvmx_write_csr(CVMX_GPIO_BIT_CFGX(12), 1);
478 cvmx_write_csr(CVMX_GPIO_TX_SET
, 0x1000);
481 octeon_write_lcd("PowerOff");
485 octeon_kill_core(NULL
);
488 static char __read_mostly octeon_system_type
[80];
490 static void __init
init_octeon_system_type(void)
492 char const *board_type
;
494 board_type
= cvmx_board_type_to_string(octeon_bootinfo
->board_type
);
495 if (board_type
== NULL
) {
496 struct device_node
*root
;
499 root
= of_find_node_by_path("/");
500 ret
= of_property_read_string(root
, "model", &board_type
);
503 board_type
= "Unsupported Board";
506 snprintf(octeon_system_type
, sizeof(octeon_system_type
), "%s (%s)",
507 board_type
, octeon_model_get_string(read_c0_prid()));
511 * Return a string representing the system type
515 const char *octeon_board_type_string(void)
517 return octeon_system_type
;
520 const char *get_system_type(void)
521 __attribute__ ((alias("octeon_board_type_string")));
523 void octeon_user_io_init(void)
525 union octeon_cvmemctl cvmmemctl
;
527 /* Get the current settings for CP0_CVMMEMCTL_REG */
528 cvmmemctl
.u64
= read_c0_cvmmemctl();
529 /* R/W If set, marked write-buffer entries time out the same
530 * as as other entries; if clear, marked write-buffer entries
531 * use the maximum timeout. */
532 cvmmemctl
.s
.dismarkwblongto
= 1;
533 /* R/W If set, a merged store does not clear the write-buffer
534 * entry timeout state. */
535 cvmmemctl
.s
.dismrgclrwbto
= 0;
536 /* R/W Two bits that are the MSBs of the resultant CVMSEG LM
537 * word location for an IOBDMA. The other 8 bits come from the
538 * SCRADDR field of the IOBDMA. */
539 cvmmemctl
.s
.iobdmascrmsb
= 0;
540 /* R/W If set, SYNCWS and SYNCS only order marked stores; if
541 * clear, SYNCWS and SYNCS only order unmarked
542 * stores. SYNCWSMARKED has no effect when DISSYNCWS is
544 cvmmemctl
.s
.syncwsmarked
= 0;
545 /* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as SYNC. */
546 cvmmemctl
.s
.dissyncws
= 0;
547 /* R/W If set, no stall happens on write buffer full. */
548 if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2
))
549 cvmmemctl
.s
.diswbfst
= 1;
551 cvmmemctl
.s
.diswbfst
= 0;
552 /* R/W If set (and SX set), supervisor-level loads/stores can
553 * use XKPHYS addresses with <48>==0 */
554 cvmmemctl
.s
.xkmemenas
= 0;
556 /* R/W If set (and UX set), user-level loads/stores can use
557 * XKPHYS addresses with VA<48>==0 */
558 cvmmemctl
.s
.xkmemenau
= 0;
560 /* R/W If set (and SX set), supervisor-level loads/stores can
561 * use XKPHYS addresses with VA<48>==1 */
562 cvmmemctl
.s
.xkioenas
= 0;
564 /* R/W If set (and UX set), user-level loads/stores can use
565 * XKPHYS addresses with VA<48>==1 */
566 cvmmemctl
.s
.xkioenau
= 0;
568 /* R/W If set, all stores act as SYNCW (NOMERGE must be set
569 * when this is set) RW, reset to 0. */
570 cvmmemctl
.s
.allsyncw
= 0;
572 /* R/W If set, no stores merge, and all stores reach the
573 * coherent bus in order. */
574 cvmmemctl
.s
.nomerge
= 0;
575 /* R/W Selects the bit in the counter used for DID time-outs 0
576 * = 231, 1 = 230, 2 = 229, 3 = 214. Actual time-out is
577 * between 1x and 2x this interval. For example, with
578 * DIDTTO=3, expiration interval is between 16K and 32K. */
579 cvmmemctl
.s
.didtto
= 0;
580 /* R/W If set, the (mem) CSR clock never turns off. */
581 cvmmemctl
.s
.csrckalwys
= 0;
582 /* R/W If set, mclk never turns off. */
583 cvmmemctl
.s
.mclkalwys
= 0;
584 /* R/W Selects the bit in the counter used for write buffer
585 * flush time-outs (WBFLT+11) is the bit position in an
586 * internal counter used to determine expiration. The write
587 * buffer expires between 1x and 2x this interval. For
588 * example, with WBFLT = 0, a write buffer expires between 2K
589 * and 4K cycles after the write buffer entry is allocated. */
590 cvmmemctl
.s
.wbfltime
= 0;
591 /* R/W If set, do not put Istream in the L2 cache. */
592 cvmmemctl
.s
.istrnol2
= 0;
595 * R/W The write buffer threshold. As per erratum Core-14752
596 * for CN63XX, a sc/scd might fail if the write buffer is
597 * full. Lowering WBTHRESH greatly lowers the chances of the
598 * write buffer ever being full and triggering the erratum.
600 if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X
))
601 cvmmemctl
.s
.wbthresh
= 4;
603 cvmmemctl
.s
.wbthresh
= 10;
605 /* R/W If set, CVMSEG is available for loads/stores in
606 * kernel/debug mode. */
607 #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
608 cvmmemctl
.s
.cvmsegenak
= 1;
610 cvmmemctl
.s
.cvmsegenak
= 0;
612 /* R/W If set, CVMSEG is available for loads/stores in
613 * supervisor mode. */
614 cvmmemctl
.s
.cvmsegenas
= 0;
615 /* R/W If set, CVMSEG is available for loads/stores in user
617 cvmmemctl
.s
.cvmsegenau
= 0;
619 write_c0_cvmmemctl(cvmmemctl
.u64
);
621 /* Setup of CVMSEG is done in kernel-entry-init.h */
622 if (smp_processor_id() == 0)
623 pr_notice("CVMSEG size: %d cache lines (%d bytes)\n",
624 CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
,
625 CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
* 128);
627 if (octeon_has_feature(OCTEON_FEATURE_FAU
)) {
628 union cvmx_iob_fau_timeout fau_timeout
;
630 /* Set a default for the hardware timeouts */
632 fau_timeout
.s
.tout_val
= 0xfff;
633 /* Disable tagwait FAU timeout */
634 fau_timeout
.s
.tout_enb
= 0;
635 cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT
, fau_timeout
.u64
);
638 if ((!OCTEON_IS_MODEL(OCTEON_CN68XX
) &&
639 !OCTEON_IS_MODEL(OCTEON_CN7XXX
)) ||
640 OCTEON_IS_MODEL(OCTEON_CN70XX
)) {
641 union cvmx_pow_nw_tim nm_tim
;
646 cvmx_write_csr(CVMX_POW_NW_TIM
, nm_tim
.u64
);
649 write_octeon_c0_icacheerr(0);
650 write_c0_derraddr1(0);
654 * Early entry point for arch setup
656 void __init
prom_init(void)
658 struct cvmx_sysinfo
*sysinfo
;
664 #ifdef CONFIG_CAVIUM_RESERVE32
668 * The bootloader passes a pointer to the boot descriptor in
669 * $a3, this is available as fw_arg3.
671 octeon_boot_desc_ptr
= (struct octeon_boot_descriptor
*)fw_arg3
;
673 cvmx_phys_to_ptr(octeon_boot_desc_ptr
->cvmx_desc_vaddr
);
674 cvmx_bootmem_init(cvmx_phys_to_ptr(octeon_bootinfo
->phy_mem_desc_addr
));
676 sysinfo
= cvmx_sysinfo_get();
677 memset(sysinfo
, 0, sizeof(*sysinfo
));
678 sysinfo
->system_dram_size
= octeon_bootinfo
->dram_size
<< 20;
679 sysinfo
->phy_mem_desc_addr
= (u64
)phys_to_virt(octeon_bootinfo
->phy_mem_desc_addr
);
681 if ((octeon_bootinfo
->major_version
> 1) ||
682 (octeon_bootinfo
->major_version
== 1 &&
683 octeon_bootinfo
->minor_version
>= 4))
684 cvmx_coremask_copy(&sysinfo
->core_mask
,
685 &octeon_bootinfo
->ext_core_mask
);
687 cvmx_coremask_set64(&sysinfo
->core_mask
,
688 octeon_bootinfo
->core_mask
);
690 /* Some broken u-boot pass garbage in upper bits, clear them out */
691 if (!OCTEON_IS_MODEL(OCTEON_CN78XX
))
692 for (i
= 512; i
< 1024; i
++)
693 cvmx_coremask_clear_core(&sysinfo
->core_mask
, i
);
695 sysinfo
->exception_base_addr
= octeon_bootinfo
->exception_base_addr
;
696 sysinfo
->cpu_clock_hz
= octeon_bootinfo
->eclock_hz
;
697 sysinfo
->dram_data_rate_hz
= octeon_bootinfo
->dclock_hz
* 2;
698 sysinfo
->board_type
= octeon_bootinfo
->board_type
;
699 sysinfo
->board_rev_major
= octeon_bootinfo
->board_rev_major
;
700 sysinfo
->board_rev_minor
= octeon_bootinfo
->board_rev_minor
;
701 memcpy(sysinfo
->mac_addr_base
, octeon_bootinfo
->mac_addr_base
,
702 sizeof(sysinfo
->mac_addr_base
));
703 sysinfo
->mac_addr_count
= octeon_bootinfo
->mac_addr_count
;
704 memcpy(sysinfo
->board_serial_number
,
705 octeon_bootinfo
->board_serial_number
,
706 sizeof(sysinfo
->board_serial_number
));
707 sysinfo
->compact_flash_common_base_addr
=
708 octeon_bootinfo
->compact_flash_common_base_addr
;
709 sysinfo
->compact_flash_attribute_base_addr
=
710 octeon_bootinfo
->compact_flash_attribute_base_addr
;
711 sysinfo
->led_display_base_addr
= octeon_bootinfo
->led_display_base_addr
;
712 sysinfo
->dfa_ref_clock_hz
= octeon_bootinfo
->dfa_ref_clock_hz
;
713 sysinfo
->bootloader_config_flags
= octeon_bootinfo
->config_flags
;
715 if (OCTEON_IS_OCTEON2()) {
716 /* I/O clock runs at a different rate than the CPU. */
717 union cvmx_mio_rst_boot rst_boot
;
718 rst_boot
.u64
= cvmx_read_csr(CVMX_MIO_RST_BOOT
);
719 octeon_io_clock_rate
= 50000000 * rst_boot
.s
.pnr_mul
;
720 } else if (OCTEON_IS_OCTEON3()) {
721 /* I/O clock runs at a different rate than the CPU. */
722 union cvmx_rst_boot rst_boot
;
723 rst_boot
.u64
= cvmx_read_csr(CVMX_RST_BOOT
);
724 octeon_io_clock_rate
= 50000000 * rst_boot
.s
.pnr_mul
;
726 octeon_io_clock_rate
= sysinfo
->cpu_clock_hz
;
729 t
= read_c0_cvmctl();
730 if ((t
& (1ull << 27)) == 0) {
732 * Setup the multiplier save/restore code if
733 * CvmCtl[NOMUL] clear.
741 int save_max
= (char *)octeon_mult_save_end
-
742 (char *)octeon_mult_save
;
743 int restore_max
= (char *)octeon_mult_restore_end
-
744 (char *)octeon_mult_restore
;
745 if (current_cpu_data
.cputype
== CPU_CAVIUM_OCTEON3
) {
746 save
= octeon_mult_save3
;
747 save_end
= octeon_mult_save3_end
;
748 restore
= octeon_mult_restore3
;
749 restore_end
= octeon_mult_restore3_end
;
751 save
= octeon_mult_save2
;
752 save_end
= octeon_mult_save2_end
;
753 restore
= octeon_mult_restore2
;
754 restore_end
= octeon_mult_restore2_end
;
756 save_len
= (char *)save_end
- (char *)save
;
757 restore_len
= (char *)restore_end
- (char *)restore
;
758 if (!WARN_ON(save_len
> save_max
||
759 restore_len
> restore_max
)) {
760 memcpy(octeon_mult_save
, save
, save_len
);
761 memcpy(octeon_mult_restore
, restore
, restore_len
);
766 * Only enable the LED controller if we're running on a CN38XX, CN58XX,
767 * or CN56XX. The CN30XX and CN31XX don't have an LED controller.
769 if (!octeon_is_simulation() &&
770 octeon_has_feature(OCTEON_FEATURE_LED_CONTROLLER
)) {
771 cvmx_write_csr(CVMX_LED_EN
, 0);
772 cvmx_write_csr(CVMX_LED_PRT
, 0);
773 cvmx_write_csr(CVMX_LED_DBG
, 0);
774 cvmx_write_csr(CVMX_LED_PRT_FMT
, 0);
775 cvmx_write_csr(CVMX_LED_UDD_CNTX(0), 32);
776 cvmx_write_csr(CVMX_LED_UDD_CNTX(1), 32);
777 cvmx_write_csr(CVMX_LED_UDD_DATX(0), 0);
778 cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0);
779 cvmx_write_csr(CVMX_LED_EN
, 1);
781 #ifdef CONFIG_CAVIUM_RESERVE32
783 * We need to temporarily allocate all memory in the reserve32
784 * region. This makes sure the kernel doesn't allocate this
785 * memory when it is getting memory from the
786 * bootloader. Later, after the memory allocations are
787 * complete, the reserve32 will be freed.
789 * Allocate memory for RESERVED32 aligned on 2MB boundary. This
790 * is in case we later use hugetlb entries with it.
792 addr
= cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32
<< 20,
794 "CAVIUM_RESERVE32", 0);
796 pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
798 octeon_reserve32_memory
= addr
;
801 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2
802 if (cvmx_read_csr(CVMX_L2D_FUS3
) & (3ull << 34)) {
803 pr_info("Skipping L2 locking due to reduced L2 cache size\n");
805 uint32_t __maybe_unused ebase
= read_c0_ebase() & 0x3ffff000;
806 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB
808 cvmx_l2c_lock_mem_region(ebase
, 0x100);
810 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION
811 /* General exception */
812 cvmx_l2c_lock_mem_region(ebase
+ 0x180, 0x80);
814 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
815 /* Interrupt handler */
816 cvmx_l2c_lock_mem_region(ebase
+ 0x200, 0x80);
818 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT
819 cvmx_l2c_lock_mem_region(__pa_symbol(handle_int
), 0x100);
820 cvmx_l2c_lock_mem_region(__pa_symbol(plat_irq_dispatch
), 0x80);
822 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY
823 cvmx_l2c_lock_mem_region(__pa_symbol(memcpy
), 0x480);
828 octeon_check_cpu_bist();
830 octeon_uart
= octeon_get_boot_uart();
833 octeon_write_lcd("LinuxSMP");
835 octeon_write_lcd("Linux");
838 octeon_setup_delays();
841 * BIST should always be enabled when doing a soft reset. L2
842 * Cache locking for instance is not cleared unless BIST is
843 * enabled. Unfortunately due to a chip errata G-200 for
844 * Cn38XX and CN31XX, BIST msut be disabled on these parts.
846 if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2
) ||
847 OCTEON_IS_MODEL(OCTEON_CN31XX
))
848 cvmx_write_csr(CVMX_CIU_SOFT_BIST
, 0);
850 cvmx_write_csr(CVMX_CIU_SOFT_BIST
, 1);
852 /* Default to 64MB in the simulator to speed things up */
853 if (octeon_is_simulation())
854 max_memory
= 64ull << 20;
856 arg
= strstr(arcs_cmdline
, "mem=");
858 max_memory
= memparse(arg
+ 4, &p
);
860 max_memory
= 32ull << 30;
862 reserve_low_mem
= memparse(p
+ 1, &p
);
866 argc
= octeon_boot_desc_ptr
->argc
;
867 for (i
= 0; i
< argc
; i
++) {
869 cvmx_phys_to_ptr(octeon_boot_desc_ptr
->argv
[i
]);
870 if ((strncmp(arg
, "MEM=", 4) == 0) ||
871 (strncmp(arg
, "mem=", 4) == 0)) {
872 max_memory
= memparse(arg
+ 4, &p
);
874 max_memory
= 32ull << 30;
876 reserve_low_mem
= memparse(p
+ 1, &p
);
878 } else if (strncmp(arg
, "crashkernel=", 12) == 0) {
879 crashk_size
= memparse(arg
+12, &p
);
881 crashk_base
= memparse(p
+1, &p
);
882 strcat(arcs_cmdline
, " ");
883 strcat(arcs_cmdline
, arg
);
885 * To do: switch parsing to new style, something like:
886 * parse_crashkernel(arg, sysinfo->system_dram_size,
887 * &crashk_size, &crashk_base);
890 } else if (strlen(arcs_cmdline
) + strlen(arg
) + 1 <
891 sizeof(arcs_cmdline
) - 1) {
892 strcat(arcs_cmdline
, " ");
893 strcat(arcs_cmdline
, arg
);
897 if (strstr(arcs_cmdline
, "console=") == NULL
) {
898 if (octeon_uart
== 1)
899 strcat(arcs_cmdline
, " console=ttyS1,115200");
901 strcat(arcs_cmdline
, " console=ttyS0,115200");
904 mips_hpt_frequency
= octeon_get_clock_rate();
906 octeon_init_cvmcount();
908 _machine_restart
= octeon_restart
;
909 _machine_halt
= octeon_halt
;
912 _machine_kexec_shutdown
= octeon_shutdown
;
913 _machine_crash_shutdown
= octeon_crash_shutdown
;
914 _machine_kexec_prepare
= octeon_kexec_prepare
;
916 _crash_smp_send_stop
= octeon_crash_smp_send_stop
;
920 octeon_user_io_init();
924 /* Exclude a single page from the regions obtained in plat_mem_setup. */
925 #ifndef CONFIG_CRASH_DUMP
926 static __init
void memory_exclude_page(u64 addr
, u64
*mem
, u64
*size
)
928 if (addr
> *mem
&& addr
< *mem
+ *size
) {
929 u64 inc
= addr
- *mem
;
930 add_memory_region(*mem
, inc
, BOOT_MEM_RAM
);
935 if (addr
== *mem
&& *size
> PAGE_SIZE
) {
940 #endif /* CONFIG_CRASH_DUMP */
942 void __init
fw_init_cmdline(void)
946 octeon_boot_desc_ptr
= (struct octeon_boot_descriptor
*)fw_arg3
;
947 for (i
= 0; i
< octeon_boot_desc_ptr
->argc
; i
++) {
949 cvmx_phys_to_ptr(octeon_boot_desc_ptr
->argv
[i
]);
950 if (strlen(arcs_cmdline
) + strlen(arg
) + 1 <
951 sizeof(arcs_cmdline
) - 1) {
952 strcat(arcs_cmdline
, " ");
953 strcat(arcs_cmdline
, arg
);
958 void __init
*plat_get_fdt(void)
961 cvmx_phys_to_ptr(octeon_boot_desc_ptr
->cvmx_desc_vaddr
);
962 return phys_to_virt(octeon_bootinfo
->fdt_addr
);
965 void __init
plat_mem_setup(void)
967 uint64_t mem_alloc_size
;
970 #ifndef CONFIG_CRASH_DUMP
972 uint64_t kernel_start
;
973 uint64_t kernel_size
;
980 * The Mips memory init uses the first memory location for
981 * some memory vectors. When SPARSEMEM is in use, it doesn't
982 * verify that the size is big enough for the final
983 * vectors. Making the smallest chuck 4MB seems to be enough
984 * to consistently work.
986 mem_alloc_size
= 4 << 20;
987 if (mem_alloc_size
> max_memory
)
988 mem_alloc_size
= max_memory
;
990 /* Crashkernel ignores bootmem list. It relies on mem=X@Y option */
991 #ifdef CONFIG_CRASH_DUMP
992 add_memory_region(reserve_low_mem
, max_memory
, BOOT_MEM_RAM
);
996 if (crashk_size
> 0) {
997 add_memory_region(crashk_base
, crashk_size
, BOOT_MEM_RAM
);
998 crashk_end
= crashk_base
+ crashk_size
;
1002 * When allocating memory, we want incrementing addresses from
1003 * bootmem_alloc so the code in add_memory_region can merge
1004 * regions next to each other.
1006 cvmx_bootmem_lock();
1007 while ((boot_mem_map
.nr_map
< BOOT_MEM_MAP_MAX
)
1008 && (total
< max_memory
)) {
1009 memory
= cvmx_bootmem_phy_alloc(mem_alloc_size
,
1010 __pa_symbol(&_end
), -1,
1012 CVMX_BOOTMEM_FLAG_NO_LOCKING
);
1014 u64 size
= mem_alloc_size
;
1020 * exclude a page at the beginning and end of
1021 * the 256MB PCIe 'hole' so the kernel will not
1022 * try to allocate multi-page buffers that
1023 * span the discontinuity.
1025 memory_exclude_page(CVMX_PCIE_BAR1_PHYS_BASE
,
1027 memory_exclude_page(CVMX_PCIE_BAR1_PHYS_BASE
+
1028 CVMX_PCIE_BAR1_PHYS_SIZE
,
1031 end
= memory
+ mem_alloc_size
;
1034 * This function automatically merges address regions
1035 * next to each other if they are received in
1036 * incrementing order
1038 if (memory
< crashk_base
&& end
> crashk_end
) {
1039 /* region is fully in */
1040 add_memory_region(memory
,
1041 crashk_base
- memory
,
1043 total
+= crashk_base
- memory
;
1044 add_memory_region(crashk_end
,
1047 total
+= end
- crashk_end
;
1051 if (memory
>= crashk_base
&& end
<= crashk_end
)
1053 * Entire memory region is within the new
1054 * kernel's memory, ignore it.
1058 if (memory
> crashk_base
&& memory
< crashk_end
&&
1061 * Overlap with the beginning of the region,
1062 * reserve the beginning.
1064 mem_alloc_size
-= crashk_end
- memory
;
1065 memory
= crashk_end
;
1066 } else if (memory
< crashk_base
&& end
> crashk_base
&&
1069 * Overlap with the beginning of the region,
1072 mem_alloc_size
-= end
- crashk_base
;
1074 add_memory_region(memory
, mem_alloc_size
, BOOT_MEM_RAM
);
1075 total
+= mem_alloc_size
;
1076 /* Recovering mem_alloc_size */
1077 mem_alloc_size
= 4 << 20;
1082 cvmx_bootmem_unlock();
1083 /* Add the memory region for the kernel. */
1084 kernel_start
= (unsigned long) _text
;
1085 kernel_size
= _end
- _text
;
1087 /* Adjust for physical offset. */
1088 kernel_start
&= ~0xffffffff80000000ULL
;
1089 add_memory_region(kernel_start
, kernel_size
, BOOT_MEM_RAM
);
1090 #endif /* CONFIG_CRASH_DUMP */
1092 #ifdef CONFIG_CAVIUM_RESERVE32
1094 * Now that we've allocated the kernel memory it is safe to
1095 * free the reserved region. We free it here so that builtin
1096 * drivers can use the memory.
1098 if (octeon_reserve32_memory
)
1099 cvmx_bootmem_free_named("CAVIUM_RESERVE32");
1100 #endif /* CONFIG_CAVIUM_RESERVE32 */
1103 panic("Unable to allocate memory from "
1104 "cvmx_bootmem_phy_alloc");
1108 * Emit one character to the boot UART. Exported for use by the
1111 int prom_putchar(char c
)
1115 /* Spin until there is room */
1117 lsrval
= cvmx_read_csr(CVMX_MIO_UARTX_LSR(octeon_uart
));
1118 } while ((lsrval
& 0x20) == 0);
1120 /* Write the byte */
1121 cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart
), c
& 0xffull
);
1124 EXPORT_SYMBOL(prom_putchar
);
1126 void __init
prom_free_prom_memory(void)
1128 if (CAVIUM_OCTEON_DCACHE_PREFETCH_WAR
) {
1129 /* Check for presence of Core-14449 fix. */
1135 asm volatile("# before" : : : "memory");
1139 ".set noreorder\n\t"
1142 "1:\tlw %0,-12($31)\n\t"
1144 : "=r" (insn
) : : "$31", "memory");
1146 if ((insn
>> 26) != 0x33)
1147 panic("No PREF instruction at Core-14449 probe point.");
1149 if (((insn
>> 16) & 0x1f) != 28)
1150 panic("OCTEON II DCache prefetch workaround not in place (%04x).\n"
1151 "Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1).",
1156 void __init
octeon_fill_mac_addresses(void);
1157 int octeon_prune_device_tree(void);
1159 extern const char __appended_dtb
;
1160 extern const char __dtb_octeon_3xxx_begin
;
1161 extern const char __dtb_octeon_68xx_begin
;
1162 void __init
device_tree_init(void)
1168 #ifdef CONFIG_MIPS_ELF_APPENDED_DTB
1169 if (!fdt_check_header(&__appended_dtb
)) {
1170 fdt
= &__appended_dtb
;
1173 pr_info("Using appended Device Tree.\n");
1176 if (octeon_bootinfo
->minor_version
>= 3 && octeon_bootinfo
->fdt_addr
) {
1177 fdt
= phys_to_virt(octeon_bootinfo
->fdt_addr
);
1178 if (fdt_check_header(fdt
))
1179 panic("Corrupt Device Tree passed to kernel.");
1182 pr_info("Using passed Device Tree.\n");
1183 } else if (OCTEON_IS_MODEL(OCTEON_CN68XX
)) {
1184 fdt
= &__dtb_octeon_68xx_begin
;
1188 fdt
= &__dtb_octeon_3xxx_begin
;
1193 initial_boot_params
= (void *)fdt
;
1196 octeon_prune_device_tree();
1197 pr_info("Using internal Device Tree.\n");
1200 octeon_fill_mac_addresses();
1201 unflatten_and_copy_device_tree();
1202 init_octeon_system_type();
1205 static int __initdata disable_octeon_edac_p
;
1207 static int __init
disable_octeon_edac(char *str
)
1209 disable_octeon_edac_p
= 1;
1212 early_param("disable_octeon_edac", disable_octeon_edac
);
1214 static char *edac_device_names
[] = {
1219 static int __init
edac_devinit(void)
1221 struct platform_device
*dev
;
1226 if (disable_octeon_edac_p
)
1229 for (i
= 0; i
< ARRAY_SIZE(edac_device_names
); i
++) {
1230 name
= edac_device_names
[i
];
1231 dev
= platform_device_register_simple(name
, -1, NULL
, 0);
1233 pr_err("Registration of %s failed!\n", name
);
1238 num_lmc
= OCTEON_IS_MODEL(OCTEON_CN68XX
) ? 4 :
1239 (OCTEON_IS_MODEL(OCTEON_CN56XX
) ? 2 : 1);
1240 for (i
= 0; i
< num_lmc
; i
++) {
1241 dev
= platform_device_register_simple("octeon_lmc_edac",
1244 pr_err("Registration of octeon_lmc_edac %d failed!\n", i
);
1251 device_initcall(edac_devinit
);
1253 static void __initdata
*octeon_dummy_iospace
;
1255 static int __init
octeon_no_pci_init(void)
1258 * Initially assume there is no PCI. The PCI/PCIe platform code will
1259 * later re-initialize these to correct values if they are present.
1261 octeon_dummy_iospace
= vzalloc(IO_SPACE_LIMIT
);
1262 set_io_port_base((unsigned long)octeon_dummy_iospace
);
1263 ioport_resource
.start
= MAX_RESOURCE
;
1264 ioport_resource
.end
= 0;
1267 core_initcall(octeon_no_pci_init
);
1269 static int __init
octeon_no_pci_release(void)
1272 * Release the allocated memory if a real IO space is there.
1274 if ((unsigned long)octeon_dummy_iospace
!= mips_io_port_base
)
1275 vfree(octeon_dummy_iospace
);
1278 late_initcall(octeon_no_pci_release
);