2 # ARM CPU Frequency scaling drivers
5 # big LITTLE core layer
and glue drivers
6 config ARM_BIG_LITTLE_CPUFREQ
7 tristate
"Generic ARM big LITTLE CPUfreq driver"
8 depends on
(ARM_CPU_TOPOLOGY || ARM64
) && HAVE_CLK
9 # if CPU_THERMAL is on
and THERMAL
=m
, ARM_BIT_LITTLE_CPUFREQ cannot be
=y
10 depends on
!CPU_THERMAL || THERMAL
13 This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
15 config ARM_BRCMSTB_AVS_CPUFREQ
16 tristate
"Broadcom STB AVS CPUfreq driver"
17 depends on ARCH_BRCMSTB || COMPILE_TEST
20 Some Broadcom STB SoCs use a co
-processor running proprietary firmware
21 ("AVS") to handle voltage
and frequency scaling. This driver provides
22 a standard CPUfreq interface to to the firmware.
24 Say Y
, if you have a Broadcom SoC with AVS support for DFS or DVFS.
26 config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
27 bool
"Broadcom STB AVS CPUfreq driver sysfs debug capability"
28 depends on ARM_BRCMSTB_AVS_CPUFREQ
30 Enabling this option turns on debug support via sysfs under
31 /sys
/kernel
/debug
/brcmstb
-avs
-cpufreq. It is possible to read all
and
32 write some AVS mailbox registers through sysfs entries.
36 config ARM_DT_BL_CPUFREQ
37 tristate
"Generic probing via DT for ARM big LITTLE CPUfreq driver"
38 depends on ARM_BIG_LITTLE_CPUFREQ
&& OF
40 This enables probing via DT for Generic CPUfreq driver for ARM
41 big.LITTLE platform. This gets frequency tables from DT.
43 config ARM_VEXPRESS_SPC_CPUFREQ
44 tristate
"Versatile Express SPC based CPUfreq driver"
45 depends on ARM_BIG_LITTLE_CPUFREQ
&& ARCH_VEXPRESS_SPC
47 This
add the CPUfreq driver support for Versatile Express
48 big.LITTLE platforms using SPC for power management.
50 config ARM_EXYNOS5440_CPUFREQ
51 tristate
"SAMSUNG EXYNOS5440"
52 depends on SOC_EXYNOS5440
53 depends on HAVE_CLK
&& OF
57 This adds the CPUFreq driver for Samsung EXYNOS5440
58 SoC. The nature of exynos5440 clock controller is
59 different than previous exynos controllers so not using
60 the common exynos framework.
64 config ARM_HIGHBANK_CPUFREQ
65 tristate
"Calxeda Highbank-based"
66 depends on ARCH_HIGHBANK
&& CPUFREQ_DT
&& REGULATOR
69 This adds the CPUFreq driver for Calxeda Highbank SoC
74 config ARM_IMX6Q_CPUFREQ
75 tristate
"Freescale i.MX6 cpufreq support"
77 depends on REGULATOR_ANATOP
80 This adds cpufreq driver support for Freescale i.MX6 series SoCs.
84 config ARM_KIRKWOOD_CPUFREQ
85 def_bool MACH_KIRKWOOD
87 This adds the CPUFreq driver for Marvell Kirkwood
90 config ARM_MEDIATEK_CPUFREQ
91 tristate
"CPU Frequency scaling support for MediaTek SoCs"
92 depends on ARCH_MEDIATEK
&& REGULATOR
93 depends on
!CPU_THERMAL || THERMAL
96 This adds the CPUFreq driver support for MediaTek SoCs.
98 config ARM_OMAP2PLUS_CPUFREQ
100 depends on ARCH_OMAP2PLUS
101 default ARCH_OMAP2PLUS
103 config ARM_S3C_CPUFREQ
106 Internal configuration node for common cpufreq on Samsung SoC
108 config ARM_S3C24XX_CPUFREQ
109 bool
"CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
110 depends on ARCH_S3C24XX
111 select ARM_S3C_CPUFREQ
113 This enables the CPUfreq driver for the Samsung S3C24XX family
116 For details
, take a look at
<file
:Documentation
/cpu
-freq
>.
120 config ARM_S3C24XX_CPUFREQ_DEBUG
121 bool
"Debug CPUfreq Samsung driver core"
122 depends on ARM_S3C24XX_CPUFREQ
124 Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
126 config ARM_S3C24XX_CPUFREQ_IODEBUG
127 bool
"Debug CPUfreq Samsung driver IO timing"
128 depends on ARM_S3C24XX_CPUFREQ
130 Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
132 config ARM_S3C24XX_CPUFREQ_DEBUGFS
133 bool
"Export debugfs for CPUFreq"
134 depends on ARM_S3C24XX_CPUFREQ
&& DEBUG_FS
136 Export status information via debugfs.
138 config ARM_S3C2410_CPUFREQ
140 depends on ARM_S3C24XX_CPUFREQ
&& CPU_S3C2410
141 select S3C2410_CPUFREQ_UTILS
143 CPU Frequency scaling support for S3C2410
145 config ARM_S3C2412_CPUFREQ
147 depends on ARM_S3C24XX_CPUFREQ
&& CPU_S3C2412
149 select S3C2412_IOTIMING
151 CPU Frequency scaling support for S3C2412
and S3C2413 SoC CPUs.
153 config ARM_S3C2416_CPUFREQ
154 bool
"S3C2416 CPU Frequency scaling support"
155 depends on CPU_S3C2416
157 This adds the CPUFreq driver for the Samsung S3C2416
and
158 S3C2450 SoC. The S3C2416 supports changing the rate of the
159 armdiv clock source
and also entering a so called dynamic
160 voltage scaling mode in which it is possible to reduce the
161 core voltage of the CPU.
165 config ARM_S3C2416_CPUFREQ_VCORESCALE
166 bool
"Allow voltage scaling for S3C2416 arm core"
167 depends on ARM_S3C2416_CPUFREQ
&& REGULATOR
169 Enable CPU voltage scaling when entering the dvs mode.
170 It uses information gathered through existing hardware
and
171 tests but not documented in any datasheet.
175 config ARM_S3C2440_CPUFREQ
176 bool
"S3C2440/S3C2442 CPU Frequency scaling support"
177 depends on ARM_S3C24XX_CPUFREQ
&& (CPU_S3C2440 || CPU_S3C2442
)
178 select S3C2410_CPUFREQ_UTILS
181 CPU Frequency scaling support for S3C2440
and S3C2442 SoC CPUs.
183 config ARM_S3C64XX_CPUFREQ
184 bool
"Samsung S3C64XX"
185 depends on CPU_S3C6410
188 This adds the CPUFreq driver for Samsung S3C6410 SoC.
192 config ARM_S5PV210_CPUFREQ
193 bool
"Samsung S5PV210 and S5PC110"
194 depends on CPU_S5PV210
197 This adds the CPUFreq driver for Samsung S5PV210
and
202 config ARM_SA1100_CPUFREQ
205 config ARM_SA1110_CPUFREQ
208 config ARM_SCPI_CPUFREQ
209 tristate
"SCPI based CPUfreq driver"
210 depends on ARM_BIG_LITTLE_CPUFREQ
&& ARM_SCPI_PROTOCOL
&& COMMON_CLK_SCPI
212 This adds the CPUfreq driver support for ARM big.LITTLE platforms
213 using SCPI protocol for CPU power management.
215 This driver uses SCPI Message Protocol driver to interact with the
216 firmware providing the CPU DVFS functionality.
218 config ARM_SPEAR_CPUFREQ
219 bool
"SPEAr CPUFreq support"
220 depends on PLAT_SPEAR
223 This adds the CPUFreq driver support for SPEAr SOCs.
225 config ARM_STI_CPUFREQ
226 tristate
"STi CPUFreq support"
227 depends on SOC_STIH407
229 This driver uses the generic OPP framework to match the running
230 platform with a predefined set of suitable values. If not provided
231 we will fall
-back so safe
-values contained in Device Tree. Enable
232 this config option if you wish to
add CPUFreq support for STi based
235 config ARM_TANGO_CPUFREQ
237 depends on CPUFREQ_DT
&& ARCH_TANGO
240 config ARM_TEGRA20_CPUFREQ
241 bool
"Tegra20 CPUFreq support"
242 depends on ARCH_TEGRA
245 This adds the CPUFreq driver support for Tegra20 SOCs.
247 config ARM_TEGRA124_CPUFREQ
248 tristate
"Tegra124 CPUFreq support"
249 depends on ARCH_TEGRA
&& CPUFREQ_DT
&& REGULATOR
252 This adds the CPUFreq driver support for Tegra124 SOCs.
254 config ARM_TEGRA186_CPUFREQ
255 tristate
"Tegra186 CPUFreq support"
256 depends on ARCH_TEGRA
&& TEGRA_BPMP
258 This adds the CPUFreq driver support for Tegra186 SOCs.
260 config ARM_TI_CPUFREQ
261 bool
"Texas Instruments CPUFreq support"
262 depends on ARCH_OMAP2PLUS
264 This driver enables valid OPPs on the running platform based on
265 values contained within the SoC in use. Enable this in order to
266 use the cpufreq
-dt driver on all Texas Instruments platforms that
267 provide dt based operating
-points
-v2 tables with opp
-supported
-hw
268 data provided. Required for cpufreq support on AM335x
, AM437x
,
269 DRA7x
, and AM57x platforms.
271 config ARM_PXA2xx_CPUFREQ
272 tristate
"Intel PXA2xx CPUfreq driver"
273 depends on PXA27x || PXA25x
275 This
add the CPUFreq driver support for Intel PXA2xx SOCs.
279 config ACPI_CPPC_CPUFREQ
280 tristate
"CPUFreq driver based on the ACPI CPPC spec"
281 depends on ACPI_PROCESSOR
285 This adds a CPUFreq driver which uses CPPC methods
286 as described in the ACPIv5.1 spec. CPPC stands for
287 Collaborative Processor Performance Controls. It
288 is based on an abstract continuous scale of CPU
289 performance values which allows the
remote power
290 processor to flexibly optimize for power
and
291 performance. CPPC relies on power management firmware
292 support for its operation.