[PATCH] acpiphp: fix acpi_path_name
[linux/fpc-iii.git] / arch / mips / mips-boards / malta / malta_setup.c
blob2209e8a9de340e1125a538b5d73fee4ef0ec4224
1 /*
2 * Carsten Langgaard, carstenl@mips.com
3 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
5 * This program is free software; you can distribute it and/or modify it
6 * under the terms of the GNU General Public License (Version 2) as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
14 * You should have received a copy of the GNU General Public License along
15 * with this program; if not, write to the Free Software Foundation, Inc.,
16 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
18 #include <linux/config.h>
19 #include <linux/init.h>
20 #include <linux/sched.h>
21 #include <linux/ioport.h>
22 #include <linux/pci.h>
23 #include <linux/tty.h>
25 #ifdef CONFIG_MTD
26 #include <linux/mtd/partitions.h>
27 #include <linux/mtd/physmap.h>
28 #include <linux/mtd/mtd.h>
29 #include <linux/mtd/map.h>
30 #endif
32 #include <asm/cpu.h>
33 #include <asm/bootinfo.h>
34 #include <asm/irq.h>
35 #include <asm/mips-boards/generic.h>
36 #include <asm/mips-boards/prom.h>
37 #include <asm/mips-boards/malta.h>
38 #include <asm/mips-boards/maltaint.h>
39 #include <asm/dma.h>
40 #include <asm/time.h>
41 #include <asm/traps.h>
42 #ifdef CONFIG_VT
43 #include <linux/console.h>
44 #endif
46 extern void mips_reboot_setup(void);
47 extern void mips_time_init(void);
48 extern void mips_timer_setup(struct irqaction *irq);
49 extern unsigned long mips_rtc_get_time(void);
51 #ifdef CONFIG_KGDB
52 extern void kgdb_config(void);
53 #endif
55 struct resource standard_io_resources[] = {
56 { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
57 { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
58 { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
59 { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
60 { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
63 #ifdef CONFIG_MTD
64 static struct mtd_partition malta_mtd_partitions[] = {
66 .name = "YAMON",
67 .offset = 0x0,
68 .size = 0x100000,
69 .mask_flags = MTD_WRITEABLE
72 .name = "User FS",
73 .offset = 0x100000,
74 .size = 0x2e0000
77 .name = "Board Config",
78 .offset = 0x3e0000,
79 .size = 0x020000,
80 .mask_flags = MTD_WRITEABLE
84 #define number_partitions (sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition))
85 #endif
87 const char *get_system_type(void)
89 return "MIPS Malta";
92 #ifdef CONFIG_BLK_DEV_FD
93 void __init fd_activate(void)
96 * Activate Floppy Controller in the SMSC FDC37M817 Super I/O
97 * Controller.
98 * Done by YAMON 2.00 onwards
100 /* Entering config state. */
101 SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG);
103 /* Activate floppy controller. */
104 SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG);
105 SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG);
106 SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG);
107 SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG);
109 /* Exit config state. */
110 SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);
112 #endif
114 void __init plat_setup(void)
116 unsigned int i;
118 mips_pcibios_init();
120 /* Request I/O space for devices used on the Malta board. */
121 for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
122 request_resource(&ioport_resource, standard_io_resources+i);
125 * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge.
127 enable_dma(4);
129 #ifdef CONFIG_KGDB
130 kgdb_config ();
131 #endif
133 if ((mips_revision_corid == MIPS_REVISION_CORID_BONITO64) ||
134 (mips_revision_corid == MIPS_REVISION_CORID_CORE_20K) ||
135 (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL_BON)) {
136 char *argptr;
138 argptr = prom_getcmdline();
139 if (strstr(argptr, "debug")) {
140 BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE;
141 printk ("Enabled Bonito debug mode\n");
143 else
144 BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
146 #ifdef CONFIG_DMA_COHERENT
147 if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
148 BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
149 printk("Enabled Bonito CPU coherency\n");
151 argptr = prom_getcmdline();
152 if (strstr(argptr, "iobcuncached")) {
153 BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN;
154 BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
155 ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
156 BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
157 printk("Disabled Bonito IOBC coherency\n");
159 else {
160 BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN;
161 BONITO_PCIMEMBASECFG |=
162 (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
163 BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
164 printk("Disabled Bonito IOBC coherency\n");
167 else
168 panic("Hardware DMA cache coherency not supported");
170 #endif
172 #ifdef CONFIG_DMA_COHERENT
173 else {
174 panic("Hardware DMA cache coherency not supported");
176 #endif
178 #ifdef CONFIG_BLK_DEV_IDE
179 /* Check PCI clock */
181 int jmpr = (*((volatile unsigned int *)ioremap(MALTA_JMPRS_REG, sizeof(unsigned int))) >> 2) & 0x07;
182 static const int pciclocks[] __initdata = {
183 33, 20, 25, 30, 12, 16, 37, 10
185 int pciclock = pciclocks[jmpr];
186 char *argptr = prom_getcmdline();
188 if (pciclock != 33 && !strstr (argptr, "idebus=")) {
189 printk("WARNING: PCI clock is %dMHz, setting idebus\n", pciclock);
190 argptr += strlen(argptr);
191 sprintf (argptr, " idebus=%d", pciclock);
192 if (pciclock < 20 || pciclock > 66)
193 printk ("WARNING: IDE timing calculations will be incorrect\n");
196 #endif
197 #ifdef CONFIG_BLK_DEV_FD
198 fd_activate ();
199 #endif
200 #ifdef CONFIG_VT
201 #if defined(CONFIG_VGA_CONSOLE)
202 screen_info = (struct screen_info) {
203 0, 25, /* orig-x, orig-y */
204 0, /* unused */
205 0, /* orig-video-page */
206 0, /* orig-video-mode */
207 80, /* orig-video-cols */
208 0,0,0, /* ega_ax, ega_bx, ega_cx */
209 25, /* orig-video-lines */
210 VIDEO_TYPE_VGAC, /* orig-video-isVGA */
211 16 /* orig-video-points */
213 #endif
214 #endif
216 #ifdef CONFIG_MTD
218 * Support for MTD on Malta. Use the generic physmap driver
220 physmap_configure(0x1e000000, 0x400000, 4, NULL);
221 physmap_set_partitions(malta_mtd_partitions, number_partitions);
222 #endif
224 mips_reboot_setup();
226 board_time_init = mips_time_init;
227 board_timer_setup = mips_timer_setup;
228 rtc_get_time = mips_rtc_get_time;