[PATCH] acpiphp: fix acpi_path_name

[linux/fpc-iii.git] / arch / mips / sgi-ip27 / ip27-irq.c

/*
 * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
 *
 * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
 * Copyright (C) 1999 - 2001 Kanoj Sarcar
 */

#undef DEBUG

#include <linux/config.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/delay.h>
#include <linux/bitops.h>

#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>

#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/pci/bridge.h>
#include <asm/sn/addrs.h>
#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
#include <asm/sn/hub.h>
#include <asm/sn/intr.h>

/*
 * Linux has a controller-independent x86 interrupt architecture.
 * every controller has a 'controller-template', that is used
 * by the main code to do the right thing. Each driver-visible
 * interrupt source is transparently wired to the apropriate
 * controller. Thus drivers need not be aware of the
 * interrupt-controller.
 *
 * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
 * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
 * (IO-APICs assumed to be messaging to Pentium local-APICs)
 *
 * the code is designed to be easily extended with new/different
 * interrupt controllers, without having to do assembly magic.
 */

extern asmlinkage void ip27_irq(void);

extern struct bridge_controller *irq_to_bridge[];
extern int irq_to_slot[];

/*
 * use these macros to get the encoded nasid and widget id
 * from the irq value
 */
#define IRQ_TO_BRIDGE(i)                irq_to_bridge[(i)]
#define SLOT_FROM_PCI_IRQ(i)            irq_to_slot[i]

static inline int alloc_level(int cpu, int irq)
{
        struct hub_data *hub = hub_data(cpu_to_node(cpu));
        struct slice_data *si = cpu_data[cpu].data;
        int level;

        level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
        if (level >= LEVELS_PER_SLICE)
                panic("Cpu %d flooded with devices\n", cpu);

        __set_bit(level, hub->irq_alloc_mask);
        si->level_to_irq[level] = irq;

        return level;
}

static inline int find_level(cpuid_t *cpunum, int irq)
{
        int cpu, i;

        for_each_online_cpu(cpu) {
                struct slice_data *si = cpu_data[cpu].data;

                for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
                        if (si->level_to_irq[i] == irq) {
                                *cpunum = cpu;

                                return i;
                        }
        }

        panic("Could not identify cpu/level for irq %d\n", irq);
}

/*
 * Find first bit set
 */
static int ms1bit(unsigned long x)
{
        int b = 0, s;

        s = 16; if (x >> 16 == 0) s = 0; b += s; x >>= s;
        s =  8; if (x >>  8 == 0) s = 0; b += s; x >>= s;
        s =  4; if (x >>  4 == 0) s = 0; b += s; x >>= s;
        s =  2; if (x >>  2 == 0) s = 0; b += s; x >>= s;
        s =  1; if (x >>  1 == 0) s = 0; b += s;

        return b;
}

/*
 * This code is unnecessarily complex, because we do SA_INTERRUPT
 * intr enabling. Basically, once we grab the set of intrs we need
 * to service, we must mask _all_ these interrupts; firstly, to make
 * sure the same intr does not intr again, causing recursion that
 * can lead to stack overflow. Secondly, we can not just mask the
 * one intr we are do_IRQing, because the non-masked intrs in the
 * first set might intr again, causing multiple servicings of the
 * same intr. This effect is mostly seen for intercpu intrs.
 * Kanoj 05.13.00
 */

void ip27_do_irq_mask0(struct pt_regs *regs)
{
        int irq, swlevel;
        hubreg_t pend0, mask0;
        cpuid_t cpu = smp_processor_id();
        int pi_int_mask0 =
                (cputoslice(cpu) == 0) ?  PI_INT_MASK0_A : PI_INT_MASK0_B;

        /* copied from Irix intpend0() */
        pend0 = LOCAL_HUB_L(PI_INT_PEND0);
        mask0 = LOCAL_HUB_L(pi_int_mask0);

        pend0 &= mask0;         /* Pick intrs we should look at */
        if (!pend0)
                return;

        swlevel = ms1bit(pend0);
#ifdef CONFIG_SMP
        if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
                LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
        } else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) {
                LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
        } else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
                LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
                smp_call_function_interrupt();
        } else if (pend0 & (1UL << CPU_CALL_B_IRQ)) {
                LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
                smp_call_function_interrupt();
        } else
#endif
        {
                /* "map" swlevel to irq */
                struct slice_data *si = cpu_data[cpu].data;

                irq = si->level_to_irq[swlevel];
                do_IRQ(irq, regs);
        }

        LOCAL_HUB_L(PI_INT_PEND0);
}

void ip27_do_irq_mask1(struct pt_regs *regs)
{
        int irq, swlevel;
        hubreg_t pend1, mask1;
        cpuid_t cpu = smp_processor_id();
        int pi_int_mask1 = (cputoslice(cpu) == 0) ?  PI_INT_MASK1_A : PI_INT_MASK1_B;
        struct slice_data *si = cpu_data[cpu].data;

        /* copied from Irix intpend0() */
        pend1 = LOCAL_HUB_L(PI_INT_PEND1);
        mask1 = LOCAL_HUB_L(pi_int_mask1);

        pend1 &= mask1;         /* Pick intrs we should look at */
        if (!pend1)
                return;

        swlevel = ms1bit(pend1);
        /* "map" swlevel to irq */
        irq = si->level_to_irq[swlevel];
        LOCAL_HUB_CLR_INTR(swlevel);
        do_IRQ(irq, regs);

        LOCAL_HUB_L(PI_INT_PEND1);
}

void ip27_prof_timer(struct pt_regs *regs)
{
        panic("CPU %d got a profiling interrupt", smp_processor_id());
}

void ip27_hub_error(struct pt_regs *regs)
{
        panic("CPU %d got a hub error interrupt", smp_processor_id());
}

static int intr_connect_level(int cpu, int bit)
{
        nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
        struct slice_data *si = cpu_data[cpu].data;
        unsigned long flags;

        set_bit(bit, si->irq_enable_mask);

        local_irq_save(flags);
        if (!cputoslice(cpu)) {
                REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
                REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
        } else {
                REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
                REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
        }
        local_irq_restore(flags);

        return 0;
}

static int intr_disconnect_level(int cpu, int bit)
{
        nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
        struct slice_data *si = cpu_data[cpu].data;

        clear_bit(bit, si->irq_enable_mask);

        if (!cputoslice(cpu)) {
                REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
                REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
        } else {
                REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
                REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
        }

        return 0;
}

/* Startup one of the (PCI ...) IRQs routes over a bridge.  */
static unsigned int startup_bridge_irq(unsigned int irq)
{
        struct bridge_controller *bc;
        bridgereg_t device;
        bridge_t *bridge;
        int pin, swlevel;
        cpuid_t cpu;

        pin = SLOT_FROM_PCI_IRQ(irq);
        bc = IRQ_TO_BRIDGE(irq);
        bridge = bc->base;

        pr_debug("bridge_startup(): irq= 0x%x  pin=%d\n", irq, pin);
        /*
         * "map" irq to a swlevel greater than 6 since the first 6 bits
         * of INT_PEND0 are taken
         */
        swlevel = find_level(&cpu, irq);
        bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
        bridge->b_int_enable |= (1 << pin);
        bridge->b_int_enable |= 0x7ffffe00;     /* more stuff in int_enable */

        /*
         * Enable sending of an interrupt clear packt to the hub on a high to
         * low transition of the interrupt pin.
         *
         * IRIX sets additional bits in the address which are documented as
         * reserved in the bridge docs.
         */
        bridge->b_int_mode |= (1UL << pin);

        /*
         * We assume the bridge to have a 1:1 mapping between devices
         * (slots) and intr pins.
         */
        device = bridge->b_int_device;
        device &= ~(7 << (pin*3));
        device |= (pin << (pin*3));
        bridge->b_int_device = device;

        bridge->b_wid_tflush;

        return 0;       /* Never anything pending.  */
}

/* Shutdown one of the (PCI ...) IRQs routes over a bridge.  */
static void shutdown_bridge_irq(unsigned int irq)
{
        struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
        struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu));
        bridge_t *bridge = bc->base;
        struct slice_data *si = cpu_data[bc->irq_cpu].data;
        int pin, swlevel;
        cpuid_t cpu;

        pr_debug("bridge_shutdown: irq 0x%x\n", irq);
        pin = SLOT_FROM_PCI_IRQ(irq);

        /*
         * map irq to a swlevel greater than 6 since the first 6 bits
         * of INT_PEND0 are taken
         */
        swlevel = find_level(&cpu, irq);
        intr_disconnect_level(cpu, swlevel);

        __clear_bit(swlevel, hub->irq_alloc_mask);
        si->level_to_irq[swlevel] = -1;

        bridge->b_int_enable &= ~(1 << pin);
        bridge->b_wid_tflush;
}

static inline void enable_bridge_irq(unsigned int irq)
{
        cpuid_t cpu;
        int swlevel;

        swlevel = find_level(&cpu, irq);        /* Criminal offence */
        intr_connect_level(cpu, swlevel);
}

static inline void disable_bridge_irq(unsigned int irq)
{
        cpuid_t cpu;
        int swlevel;

        swlevel = find_level(&cpu, irq);        /* Criminal offence */
        intr_disconnect_level(cpu, swlevel);
}

static void mask_and_ack_bridge_irq(unsigned int irq)
{
        disable_bridge_irq(irq);
}

static void end_bridge_irq(unsigned int irq)
{
        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
            irq_desc[irq].action)
                enable_bridge_irq(irq);
}

static struct hw_interrupt_type bridge_irq_type = {
        .typename       = "bridge",
        .startup        = startup_bridge_irq,
        .shutdown       = shutdown_bridge_irq,
        .enable         = enable_bridge_irq,
        .disable        = disable_bridge_irq,
        .ack            = mask_and_ack_bridge_irq,
        .end            = end_bridge_irq,
};

static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];

static int allocate_irqno(void)
{
        int irq;

again:
        irq = find_first_zero_bit(irq_map, NR_IRQS);

        if (irq >= NR_IRQS)
                return -ENOSPC;

        if (test_and_set_bit(irq, irq_map))
                goto again;

        return irq;
}

void free_irqno(unsigned int irq)
{
        clear_bit(irq, irq_map);
}

void __devinit register_bridge_irq(unsigned int irq)
{
        irq_desc[irq].status    = IRQ_DISABLED;
        irq_desc[irq].action    = 0;
        irq_desc[irq].depth     = 1;
        irq_desc[irq].handler   = &bridge_irq_type;
}

int __devinit request_bridge_irq(struct bridge_controller *bc)
{
        int irq = allocate_irqno();
        int swlevel, cpu;
        nasid_t nasid;

        if (irq < 0)
                return irq;

        /*
         * "map" irq to a swlevel greater than 6 since the first 6 bits
         * of INT_PEND0 are taken
         */
        cpu = bc->irq_cpu;
        swlevel = alloc_level(cpu, irq);
        if (unlikely(swlevel < 0)) {
                free_irqno(irq);

                return -EAGAIN;
        }

        /* Make sure it's not already pending when we connect it. */
        nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
        REMOTE_HUB_CLR_INTR(nasid, swlevel);

        intr_connect_level(cpu, swlevel);

        register_bridge_irq(irq);

        return irq;
}

void __init arch_init_irq(void)
{
        set_except_vector(0, ip27_irq);
}

void install_ipi(void)
{
        int slice = LOCAL_HUB_L(PI_CPU_NUM);
        int cpu = smp_processor_id();
        struct slice_data *si = cpu_data[cpu].data;
        struct hub_data *hub = hub_data(cpu_to_node(cpu));
        int resched, call;

        resched = CPU_RESCHED_A_IRQ + slice;
        __set_bit(resched, hub->irq_alloc_mask);
        __set_bit(resched, si->irq_enable_mask);
        LOCAL_HUB_CLR_INTR(resched);

        call = CPU_CALL_A_IRQ + slice;
        __set_bit(call, hub->irq_alloc_mask);
        __set_bit(call, si->irq_enable_mask);
        LOCAL_HUB_CLR_INTR(call);

        if (slice == 0) {
                LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]);
                LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]);
        } else {
                LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]);
                LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]);
        }
}