hwmon: (core) Add power attribute support to new API
[linux/fpc-iii.git] / drivers / scsi / hptiop.h
blob4d1c51153b70334e152262875f8ba7a6148dd53b
1 /*
2 * HighPoint RR3xxx/4xxx controller driver for Linux
3 * Copyright (C) 2006-2015 HighPoint Technologies, Inc. All Rights Reserved.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * Please report bugs/comments/suggestions to linux@highpoint-tech.com
16 * For more information, visit http://www.highpoint-tech.com
18 #ifndef _HPTIOP_H_
19 #define _HPTIOP_H_
21 struct hpt_iopmu_itl {
22 __le32 resrved0[4];
23 __le32 inbound_msgaddr0;
24 __le32 inbound_msgaddr1;
25 __le32 outbound_msgaddr0;
26 __le32 outbound_msgaddr1;
27 __le32 inbound_doorbell;
28 __le32 inbound_intstatus;
29 __le32 inbound_intmask;
30 __le32 outbound_doorbell;
31 __le32 outbound_intstatus;
32 __le32 outbound_intmask;
33 __le32 reserved1[2];
34 __le32 inbound_queue;
35 __le32 outbound_queue;
38 #define IOPMU_QUEUE_EMPTY 0xffffffff
39 #define IOPMU_QUEUE_MASK_HOST_BITS 0xf0000000
40 #define IOPMU_QUEUE_ADDR_HOST_BIT 0x80000000
41 #define IOPMU_QUEUE_REQUEST_SIZE_BIT 0x40000000
42 #define IOPMU_QUEUE_REQUEST_RESULT_BIT 0x40000000
44 #define IOPMU_OUTBOUND_INT_MSG0 1
45 #define IOPMU_OUTBOUND_INT_MSG1 2
46 #define IOPMU_OUTBOUND_INT_DOORBELL 4
47 #define IOPMU_OUTBOUND_INT_POSTQUEUE 8
48 #define IOPMU_OUTBOUND_INT_PCI 0x10
50 #define IOPMU_INBOUND_INT_MSG0 1
51 #define IOPMU_INBOUND_INT_MSG1 2
52 #define IOPMU_INBOUND_INT_DOORBELL 4
53 #define IOPMU_INBOUND_INT_ERROR 8
54 #define IOPMU_INBOUND_INT_POSTQUEUE 0x10
56 #define MVIOP_QUEUE_LEN 512
58 struct hpt_iopmu_mv {
59 __le32 inbound_head;
60 __le32 inbound_tail;
61 __le32 outbound_head;
62 __le32 outbound_tail;
63 __le32 inbound_msg;
64 __le32 outbound_msg;
65 __le32 reserve[10];
66 __le64 inbound_q[MVIOP_QUEUE_LEN];
67 __le64 outbound_q[MVIOP_QUEUE_LEN];
70 struct hpt_iopmv_regs {
71 __le32 reserved[0x20400 / 4];
72 __le32 inbound_doorbell;
73 __le32 inbound_intmask;
74 __le32 outbound_doorbell;
75 __le32 outbound_intmask;
78 #pragma pack(1)
79 struct hpt_iopmu_mvfrey {
80 __le32 reserved0[(0x4000 - 0) / 4];
81 __le32 inbound_base;
82 __le32 inbound_base_high;
83 __le32 reserved1[(0x4018 - 0x4008) / 4];
84 __le32 inbound_write_ptr;
85 __le32 reserved2[(0x402c - 0x401c) / 4];
86 __le32 inbound_conf_ctl;
87 __le32 reserved3[(0x4050 - 0x4030) / 4];
88 __le32 outbound_base;
89 __le32 outbound_base_high;
90 __le32 outbound_shadow_base;
91 __le32 outbound_shadow_base_high;
92 __le32 reserved4[(0x4088 - 0x4060) / 4];
93 __le32 isr_cause;
94 __le32 isr_enable;
95 __le32 reserved5[(0x1020c - 0x4090) / 4];
96 __le32 pcie_f0_int_enable;
97 __le32 reserved6[(0x10400 - 0x10210) / 4];
98 __le32 f0_to_cpu_msg_a;
99 __le32 reserved7[(0x10420 - 0x10404) / 4];
100 __le32 cpu_to_f0_msg_a;
101 __le32 reserved8[(0x10480 - 0x10424) / 4];
102 __le32 f0_doorbell;
103 __le32 f0_doorbell_enable;
106 struct mvfrey_inlist_entry {
107 dma_addr_t addr;
108 __le32 intrfc_len;
109 __le32 reserved;
112 struct mvfrey_outlist_entry {
113 __le32 val;
115 #pragma pack()
117 #define MVIOP_MU_QUEUE_ADDR_HOST_MASK (~(0x1full))
118 #define MVIOP_MU_QUEUE_ADDR_HOST_BIT 4
120 #define MVIOP_MU_QUEUE_ADDR_IOP_HIGH32 0xffffffff
121 #define MVIOP_MU_QUEUE_REQUEST_RESULT_BIT 1
122 #define MVIOP_MU_QUEUE_REQUEST_RETURN_CONTEXT 2
124 #define MVIOP_MU_INBOUND_INT_MSG 1
125 #define MVIOP_MU_INBOUND_INT_POSTQUEUE 2
126 #define MVIOP_MU_OUTBOUND_INT_MSG 1
127 #define MVIOP_MU_OUTBOUND_INT_POSTQUEUE 2
129 #define CL_POINTER_TOGGLE 0x00004000
130 #define CPU_TO_F0_DRBL_MSG_BIT 0x02000000
132 enum hpt_iopmu_message {
133 /* host-to-iop messages */
134 IOPMU_INBOUND_MSG0_NOP = 0,
135 IOPMU_INBOUND_MSG0_RESET,
136 IOPMU_INBOUND_MSG0_FLUSH,
137 IOPMU_INBOUND_MSG0_SHUTDOWN,
138 IOPMU_INBOUND_MSG0_STOP_BACKGROUND_TASK,
139 IOPMU_INBOUND_MSG0_START_BACKGROUND_TASK,
140 IOPMU_INBOUND_MSG0_RESET_COMM,
141 IOPMU_INBOUND_MSG0_MAX = 0xff,
142 /* iop-to-host messages */
143 IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_0 = 0x100,
144 IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_MAX = 0x1ff,
145 IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_0 = 0x200,
146 IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_MAX = 0x2ff,
147 IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_0 = 0x300,
148 IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_MAX = 0x3ff,
151 struct hpt_iop_request_header {
152 __le32 size;
153 __le32 type;
154 __le32 flags;
155 __le32 result;
156 __le32 context; /* host context */
157 __le32 context_hi32;
160 #define IOP_REQUEST_FLAG_SYNC_REQUEST 1
161 #define IOP_REQUEST_FLAG_BIST_REQUEST 2
162 #define IOP_REQUEST_FLAG_REMAPPED 4
163 #define IOP_REQUEST_FLAG_OUTPUT_CONTEXT 8
164 #define IOP_REQUEST_FLAG_ADDR_BITS 0x40 /* flags[31:16] is phy_addr[47:32] */
166 enum hpt_iop_request_type {
167 IOP_REQUEST_TYPE_GET_CONFIG = 0,
168 IOP_REQUEST_TYPE_SET_CONFIG,
169 IOP_REQUEST_TYPE_BLOCK_COMMAND,
170 IOP_REQUEST_TYPE_SCSI_COMMAND,
171 IOP_REQUEST_TYPE_IOCTL_COMMAND,
172 IOP_REQUEST_TYPE_MAX
175 enum hpt_iop_result_type {
176 IOP_RESULT_PENDING = 0,
177 IOP_RESULT_SUCCESS,
178 IOP_RESULT_FAIL,
179 IOP_RESULT_BUSY,
180 IOP_RESULT_RESET,
181 IOP_RESULT_INVALID_REQUEST,
182 IOP_RESULT_BAD_TARGET,
183 IOP_RESULT_CHECK_CONDITION,
186 struct hpt_iop_request_get_config {
187 struct hpt_iop_request_header header;
188 __le32 interface_version;
189 __le32 firmware_version;
190 __le32 max_requests;
191 __le32 request_size;
192 __le32 max_sg_count;
193 __le32 data_transfer_length;
194 __le32 alignment_mask;
195 __le32 max_devices;
196 __le32 sdram_size;
199 struct hpt_iop_request_set_config {
200 struct hpt_iop_request_header header;
201 __le32 iop_id;
202 __le16 vbus_id;
203 __le16 max_host_request_size;
204 __le32 reserve[6];
207 struct hpt_iopsg {
208 __le32 size;
209 __le32 eot; /* non-zero: end of table */
210 __le64 pci_address;
213 struct hpt_iop_request_block_command {
214 struct hpt_iop_request_header header;
215 u8 channel;
216 u8 target;
217 u8 lun;
218 u8 pad1;
219 __le16 command; /* IOP_BLOCK_COMMAND_{READ,WRITE} */
220 __le16 sectors;
221 __le64 lba;
222 struct hpt_iopsg sg_list[1];
225 #define IOP_BLOCK_COMMAND_READ 1
226 #define IOP_BLOCK_COMMAND_WRITE 2
227 #define IOP_BLOCK_COMMAND_VERIFY 3
228 #define IOP_BLOCK_COMMAND_FLUSH 4
229 #define IOP_BLOCK_COMMAND_SHUTDOWN 5
231 struct hpt_iop_request_scsi_command {
232 struct hpt_iop_request_header header;
233 u8 channel;
234 u8 target;
235 u8 lun;
236 u8 pad1;
237 u8 cdb[16];
238 __le32 dataxfer_length;
239 struct hpt_iopsg sg_list[1];
242 struct hpt_iop_request_ioctl_command {
243 struct hpt_iop_request_header header;
244 __le32 ioctl_code;
245 __le32 inbuf_size;
246 __le32 outbuf_size;
247 __le32 bytes_returned;
248 u8 buf[1];
249 /* out data should be put at buf[(inbuf_size+3)&~3] */
252 #define HPTIOP_MAX_REQUESTS 256u
254 struct hptiop_request {
255 struct hptiop_request *next;
256 void *req_virt;
257 u32 req_shifted_phy;
258 struct scsi_cmnd *scp;
259 int index;
262 struct hpt_scsi_pointer {
263 int mapped;
264 int sgcnt;
265 dma_addr_t dma_handle;
268 #define HPT_SCP(scp) ((struct hpt_scsi_pointer *)&(scp)->SCp)
270 enum hptiop_family {
271 UNKNOWN_BASED_IOP,
272 INTEL_BASED_IOP,
273 MV_BASED_IOP,
274 MVFREY_BASED_IOP
277 struct hptiop_hba {
278 struct hptiop_adapter_ops *ops;
279 union {
280 struct {
281 struct hpt_iopmu_itl __iomem *iop;
282 void __iomem *plx;
283 } itl;
284 struct {
285 struct hpt_iopmv_regs *regs;
286 struct hpt_iopmu_mv __iomem *mu;
287 void *internal_req;
288 dma_addr_t internal_req_phy;
289 } mv;
290 struct {
291 struct hpt_iop_request_get_config __iomem *config;
292 struct hpt_iopmu_mvfrey __iomem *mu;
294 int internal_mem_size;
295 struct hptiop_request internal_req;
296 int list_count;
297 struct mvfrey_inlist_entry *inlist;
298 dma_addr_t inlist_phy;
299 __le32 inlist_wptr;
300 struct mvfrey_outlist_entry *outlist;
301 dma_addr_t outlist_phy;
302 __le32 *outlist_cptr; /* copy pointer shadow */
303 dma_addr_t outlist_cptr_phy;
304 __le32 outlist_rptr;
305 } mvfrey;
306 } u;
308 struct Scsi_Host *host;
309 struct pci_dev *pcidev;
311 /* IOP config info */
312 u32 interface_version;
313 u32 firmware_version;
314 u32 sdram_size;
315 u32 max_devices;
316 u32 max_requests;
317 u32 max_request_size;
318 u32 max_sg_descriptors;
320 u32 req_size; /* host-allocated request buffer size */
322 u32 iopintf_v2: 1;
323 u32 initialized: 1;
324 u32 msg_done: 1;
326 struct hptiop_request * req_list;
327 struct hptiop_request reqs[HPTIOP_MAX_REQUESTS];
329 /* used to free allocated dma area */
330 void *dma_coherent[HPTIOP_MAX_REQUESTS];
331 dma_addr_t dma_coherent_handle[HPTIOP_MAX_REQUESTS];
333 atomic_t reset_count;
334 atomic_t resetting;
336 wait_queue_head_t reset_wq;
337 wait_queue_head_t ioctl_wq;
340 struct hpt_ioctl_k {
341 struct hptiop_hba * hba;
342 u32 ioctl_code;
343 u32 inbuf_size;
344 u32 outbuf_size;
345 void *inbuf;
346 void *outbuf;
347 u32 *bytes_returned;
348 void (*done)(struct hpt_ioctl_k *);
349 int result; /* HPT_IOCTL_RESULT_ */
352 struct hptiop_adapter_ops {
353 enum hptiop_family family;
354 int (*iop_wait_ready)(struct hptiop_hba *hba, u32 millisec);
355 int (*internal_memalloc)(struct hptiop_hba *hba);
356 int (*internal_memfree)(struct hptiop_hba *hba);
357 int (*map_pci_bar)(struct hptiop_hba *hba);
358 void (*unmap_pci_bar)(struct hptiop_hba *hba);
359 void (*enable_intr)(struct hptiop_hba *hba);
360 void (*disable_intr)(struct hptiop_hba *hba);
361 int (*get_config)(struct hptiop_hba *hba,
362 struct hpt_iop_request_get_config *config);
363 int (*set_config)(struct hptiop_hba *hba,
364 struct hpt_iop_request_set_config *config);
365 int (*iop_intr)(struct hptiop_hba *hba);
366 void (*post_msg)(struct hptiop_hba *hba, u32 msg);
367 void (*post_req)(struct hptiop_hba *hba, struct hptiop_request *_req);
368 int hw_dma_bit_mask;
369 int (*reset_comm)(struct hptiop_hba *hba);
370 __le64 host_phy_flag;
373 #define HPT_IOCTL_RESULT_OK 0
374 #define HPT_IOCTL_RESULT_FAILED (-1)
376 #if 0
377 #define dprintk(fmt, args...) do { printk(fmt, ##args); } while(0)
378 #else
379 #define dprintk(fmt, args...)
380 #endif
382 #endif