ALSA: usb-audio: Check mixer unit descriptors more strictly
[linux/fpc-iii.git] / drivers / watchdog / f71808e_wdt.c
blob9a1c761258ce4655b29ca46249df4e4a55cda64c
1 /***************************************************************************
2 * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> *
3 * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> *
4 * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> *
5 * *
6 * This program is free software; you can redistribute it and/or modify *
7 * it under the terms of the GNU General Public License as published by *
8 * the Free Software Foundation; either version 2 of the License, or *
9 * (at your option) any later version. *
10 * *
11 * This program is distributed in the hope that it will be useful, *
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
14 * GNU General Public License for more details. *
15 * *
16 * You should have received a copy of the GNU General Public License *
17 * along with this program; if not, write to the *
18 * Free Software Foundation, Inc., *
19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
20 ***************************************************************************/
22 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
24 #include <linux/err.h>
25 #include <linux/fs.h>
26 #include <linux/init.h>
27 #include <linux/io.h>
28 #include <linux/ioport.h>
29 #include <linux/miscdevice.h>
30 #include <linux/module.h>
31 #include <linux/mutex.h>
32 #include <linux/notifier.h>
33 #include <linux/reboot.h>
34 #include <linux/uaccess.h>
35 #include <linux/watchdog.h>
37 #define DRVNAME "f71808e_wdt"
39 #define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */
40 #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
41 #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
43 #define SIO_REG_LDSEL 0x07 /* Logical device select */
44 #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
45 #define SIO_REG_DEVREV 0x22 /* Device revision */
46 #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
47 #define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */
48 #define SIO_F81866_REG_PORT_SEL 0x27 /* F81866 Multi-Function Register */
49 #define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */
50 #define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */
51 #define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */
52 #define SIO_F81866_REG_GPIO1 0x2c /* F81866 GPIO1 Enable Register */
53 #define SIO_REG_ENABLE 0x30 /* Logical device enable */
54 #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
56 #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
57 #define SIO_F71808_ID 0x0901 /* Chipset ID */
58 #define SIO_F71858_ID 0x0507 /* Chipset ID */
59 #define SIO_F71862_ID 0x0601 /* Chipset ID */
60 #define SIO_F71868_ID 0x1106 /* Chipset ID */
61 #define SIO_F71869_ID 0x0814 /* Chipset ID */
62 #define SIO_F71869A_ID 0x1007 /* Chipset ID */
63 #define SIO_F71882_ID 0x0541 /* Chipset ID */
64 #define SIO_F71889_ID 0x0723 /* Chipset ID */
65 #define SIO_F81865_ID 0x0704 /* Chipset ID */
66 #define SIO_F81866_ID 0x1010 /* Chipset ID */
68 #define F71808FG_REG_WDO_CONF 0xf0
69 #define F71808FG_REG_WDT_CONF 0xf5
70 #define F71808FG_REG_WD_TIME 0xf6
72 #define F71808FG_FLAG_WDOUT_EN 7
74 #define F71808FG_FLAG_WDTMOUT_STS 6
75 #define F71808FG_FLAG_WD_EN 5
76 #define F71808FG_FLAG_WD_PULSE 4
77 #define F71808FG_FLAG_WD_UNIT 3
79 #define F81865_REG_WDO_CONF 0xfa
80 #define F81865_FLAG_WDOUT_EN 0
82 /* Default values */
83 #define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */
84 #define WATCHDOG_MAX_TIMEOUT (60 * 255)
85 #define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for
86 watchdog signal */
87 #define WATCHDOG_F71862FG_PIN 63 /* default watchdog reset output
88 pin number 63 */
90 static unsigned short force_id;
91 module_param(force_id, ushort, 0);
92 MODULE_PARM_DESC(force_id, "Override the detected device ID");
94 static const int max_timeout = WATCHDOG_MAX_TIMEOUT;
95 static int timeout = WATCHDOG_TIMEOUT; /* default timeout in seconds */
96 module_param(timeout, int, 0);
97 MODULE_PARM_DESC(timeout,
98 "Watchdog timeout in seconds. 1<= timeout <="
99 __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default="
100 __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
102 static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
103 module_param(pulse_width, uint, 0);
104 MODULE_PARM_DESC(pulse_width,
105 "Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms"
106 " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
108 static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN;
109 module_param(f71862fg_pin, uint, 0);
110 MODULE_PARM_DESC(f71862fg_pin,
111 "Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63"
112 " (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")");
114 static bool nowayout = WATCHDOG_NOWAYOUT;
115 module_param(nowayout, bool, 0444);
116 MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
118 static unsigned int start_withtimeout;
119 module_param(start_withtimeout, uint, 0);
120 MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
121 " given initial timeout. Zero (default) disables this feature.");
123 enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg,
124 f81865, f81866};
126 static const char *f71808e_names[] = {
127 "f71808fg",
128 "f71858fg",
129 "f71862fg",
130 "f71868",
131 "f71869",
132 "f71882fg",
133 "f71889fg",
134 "f81865",
135 "f81866",
138 /* Super-I/O Function prototypes */
139 static inline int superio_inb(int base, int reg);
140 static inline int superio_inw(int base, int reg);
141 static inline void superio_outb(int base, int reg, u8 val);
142 static inline void superio_set_bit(int base, int reg, int bit);
143 static inline void superio_clear_bit(int base, int reg, int bit);
144 static inline int superio_enter(int base);
145 static inline void superio_select(int base, int ld);
146 static inline void superio_exit(int base);
148 struct watchdog_data {
149 unsigned short sioaddr;
150 enum chips type;
151 unsigned long opened;
152 struct mutex lock;
153 char expect_close;
154 struct watchdog_info ident;
156 unsigned short timeout;
157 u8 timer_val; /* content for the wd_time register */
158 char minutes_mode;
159 u8 pulse_val; /* pulse width flag */
160 char pulse_mode; /* enable pulse output mode? */
161 char caused_reboot; /* last reboot was by the watchdog */
164 static struct watchdog_data watchdog = {
165 .lock = __MUTEX_INITIALIZER(watchdog.lock),
168 /* Super I/O functions */
169 static inline int superio_inb(int base, int reg)
171 outb(reg, base);
172 return inb(base + 1);
175 static int superio_inw(int base, int reg)
177 int val;
178 val = superio_inb(base, reg) << 8;
179 val |= superio_inb(base, reg + 1);
180 return val;
183 static inline void superio_outb(int base, int reg, u8 val)
185 outb(reg, base);
186 outb(val, base + 1);
189 static inline void superio_set_bit(int base, int reg, int bit)
191 unsigned long val = superio_inb(base, reg);
192 __set_bit(bit, &val);
193 superio_outb(base, reg, val);
196 static inline void superio_clear_bit(int base, int reg, int bit)
198 unsigned long val = superio_inb(base, reg);
199 __clear_bit(bit, &val);
200 superio_outb(base, reg, val);
203 static inline int superio_enter(int base)
205 /* Don't step on other drivers' I/O space by accident */
206 if (!request_muxed_region(base, 2, DRVNAME)) {
207 pr_err("I/O address 0x%04x already in use\n", (int)base);
208 return -EBUSY;
211 /* according to the datasheet the key must be sent twice! */
212 outb(SIO_UNLOCK_KEY, base);
213 outb(SIO_UNLOCK_KEY, base);
215 return 0;
218 static inline void superio_select(int base, int ld)
220 outb(SIO_REG_LDSEL, base);
221 outb(ld, base + 1);
224 static inline void superio_exit(int base)
226 outb(SIO_LOCK_KEY, base);
227 release_region(base, 2);
230 static int watchdog_set_timeout(int timeout)
232 if (timeout <= 0
233 || timeout > max_timeout) {
234 pr_err("watchdog timeout out of range\n");
235 return -EINVAL;
238 mutex_lock(&watchdog.lock);
240 watchdog.timeout = timeout;
241 if (timeout > 0xff) {
242 watchdog.timer_val = DIV_ROUND_UP(timeout, 60);
243 watchdog.minutes_mode = true;
244 } else {
245 watchdog.timer_val = timeout;
246 watchdog.minutes_mode = false;
249 mutex_unlock(&watchdog.lock);
251 return 0;
254 static int watchdog_set_pulse_width(unsigned int pw)
256 int err = 0;
257 unsigned int t1 = 25, t2 = 125, t3 = 5000;
259 if (watchdog.type == f71868) {
260 t1 = 30;
261 t2 = 150;
262 t3 = 6000;
265 mutex_lock(&watchdog.lock);
267 if (pw <= 1) {
268 watchdog.pulse_val = 0;
269 } else if (pw <= t1) {
270 watchdog.pulse_val = 1;
271 } else if (pw <= t2) {
272 watchdog.pulse_val = 2;
273 } else if (pw <= t3) {
274 watchdog.pulse_val = 3;
275 } else {
276 pr_err("pulse width out of range\n");
277 err = -EINVAL;
278 goto exit_unlock;
281 watchdog.pulse_mode = pw;
283 exit_unlock:
284 mutex_unlock(&watchdog.lock);
285 return err;
288 static int watchdog_keepalive(void)
290 int err = 0;
292 mutex_lock(&watchdog.lock);
293 err = superio_enter(watchdog.sioaddr);
294 if (err)
295 goto exit_unlock;
296 superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
298 if (watchdog.minutes_mode)
299 /* select minutes for timer units */
300 superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
301 F71808FG_FLAG_WD_UNIT);
302 else
303 /* select seconds for timer units */
304 superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
305 F71808FG_FLAG_WD_UNIT);
307 /* Set timer value */
308 superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME,
309 watchdog.timer_val);
311 superio_exit(watchdog.sioaddr);
313 exit_unlock:
314 mutex_unlock(&watchdog.lock);
315 return err;
318 static int f71862fg_pin_configure(unsigned short ioaddr)
320 /* When ioaddr is non-zero the calling function has to take care of
321 mutex handling and superio preparation! */
323 if (f71862fg_pin == 63) {
324 if (ioaddr) {
325 /* SPI must be disabled first to use this pin! */
326 superio_clear_bit(ioaddr, SIO_REG_ROM_ADDR_SEL, 6);
327 superio_set_bit(ioaddr, SIO_REG_MFUNCT3, 4);
329 } else if (f71862fg_pin == 56) {
330 if (ioaddr)
331 superio_set_bit(ioaddr, SIO_REG_MFUNCT1, 1);
332 } else {
333 pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin);
334 return -EINVAL;
336 return 0;
339 static int watchdog_start(void)
341 /* Make sure we don't die as soon as the watchdog is enabled below */
342 int err = watchdog_keepalive();
343 if (err)
344 return err;
346 mutex_lock(&watchdog.lock);
347 err = superio_enter(watchdog.sioaddr);
348 if (err)
349 goto exit_unlock;
350 superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
352 /* Watchdog pin configuration */
353 switch (watchdog.type) {
354 case f71808fg:
355 /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
356 superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT2, 3);
357 superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 3);
358 break;
360 case f71862fg:
361 err = f71862fg_pin_configure(watchdog.sioaddr);
362 if (err)
363 goto exit_superio;
364 break;
366 case f71868:
367 case f71869:
368 /* GPIO14 --> WDTRST# */
369 superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4);
370 break;
372 case f71882fg:
373 /* Set pin 56 to WDTRST# */
374 superio_set_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 1);
375 break;
377 case f71889fg:
378 /* set pin 40 to WDTRST# */
379 superio_outb(watchdog.sioaddr, SIO_REG_MFUNCT3,
380 superio_inb(watchdog.sioaddr, SIO_REG_MFUNCT3) & 0xcf);
381 break;
383 case f81865:
384 /* Set pin 70 to WDTRST# */
385 superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 5);
386 break;
388 case f81866:
389 /* Set pin 70 to WDTRST# */
390 superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
391 BIT(3) | BIT(0));
392 superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
393 BIT(2));
395 * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
396 * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch:
397 * BIT5: 0 -> WDTRST#
398 * 1 -> GPIO15
400 superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1,
401 BIT(5));
402 break;
404 default:
406 * 'default' label to shut up the compiler and catch
407 * programmer errors
409 err = -ENODEV;
410 goto exit_superio;
413 superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
414 superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0);
416 if (watchdog.type == f81865 || watchdog.type == f81866)
417 superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF,
418 F81865_FLAG_WDOUT_EN);
419 else
420 superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF,
421 F71808FG_FLAG_WDOUT_EN);
423 superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
424 F71808FG_FLAG_WD_EN);
426 if (watchdog.pulse_mode) {
427 /* Select "pulse" output mode with given duration */
428 u8 wdt_conf = superio_inb(watchdog.sioaddr,
429 F71808FG_REG_WDT_CONF);
431 /* Set WD_PSWIDTH bits (1:0) */
432 wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03);
433 /* Set WD_PULSE to "pulse" mode */
434 wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE);
436 superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
437 wdt_conf);
438 } else {
439 /* Select "level" output mode */
440 superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
441 F71808FG_FLAG_WD_PULSE);
444 exit_superio:
445 superio_exit(watchdog.sioaddr);
446 exit_unlock:
447 mutex_unlock(&watchdog.lock);
449 return err;
452 static int watchdog_stop(void)
454 int err = 0;
456 mutex_lock(&watchdog.lock);
457 err = superio_enter(watchdog.sioaddr);
458 if (err)
459 goto exit_unlock;
460 superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
462 superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
463 F71808FG_FLAG_WD_EN);
465 superio_exit(watchdog.sioaddr);
467 exit_unlock:
468 mutex_unlock(&watchdog.lock);
470 return err;
473 static int watchdog_get_status(void)
475 int status = 0;
477 mutex_lock(&watchdog.lock);
478 status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0;
479 mutex_unlock(&watchdog.lock);
481 return status;
484 static bool watchdog_is_running(void)
487 * if we fail to determine the watchdog's status assume it to be
488 * running to be on the safe side
490 bool is_running = true;
492 mutex_lock(&watchdog.lock);
493 if (superio_enter(watchdog.sioaddr))
494 goto exit_unlock;
495 superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
497 is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0))
498 && (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF)
499 & BIT(F71808FG_FLAG_WD_EN));
501 superio_exit(watchdog.sioaddr);
503 exit_unlock:
504 mutex_unlock(&watchdog.lock);
505 return is_running;
508 /* /dev/watchdog api */
510 static int watchdog_open(struct inode *inode, struct file *file)
512 int err;
514 /* If the watchdog is alive we don't need to start it again */
515 if (test_and_set_bit(0, &watchdog.opened))
516 return -EBUSY;
518 err = watchdog_start();
519 if (err) {
520 clear_bit(0, &watchdog.opened);
521 return err;
524 if (nowayout)
525 __module_get(THIS_MODULE);
527 watchdog.expect_close = 0;
528 return nonseekable_open(inode, file);
531 static int watchdog_release(struct inode *inode, struct file *file)
533 clear_bit(0, &watchdog.opened);
535 if (!watchdog.expect_close) {
536 watchdog_keepalive();
537 pr_crit("Unexpected close, not stopping watchdog!\n");
538 } else if (!nowayout) {
539 watchdog_stop();
541 return 0;
545 * watchdog_write:
546 * @file: file handle to the watchdog
547 * @buf: buffer to write
548 * @count: count of bytes
549 * @ppos: pointer to the position to write. No seeks allowed
551 * A write to a watchdog device is defined as a keepalive signal. Any
552 * write of data will do, as we we don't define content meaning.
555 static ssize_t watchdog_write(struct file *file, const char __user *buf,
556 size_t count, loff_t *ppos)
558 if (count) {
559 if (!nowayout) {
560 size_t i;
562 /* In case it was set long ago */
563 bool expect_close = false;
565 for (i = 0; i != count; i++) {
566 char c;
567 if (get_user(c, buf + i))
568 return -EFAULT;
569 if (c == 'V')
570 expect_close = true;
573 /* Properly order writes across fork()ed processes */
574 mutex_lock(&watchdog.lock);
575 watchdog.expect_close = expect_close;
576 mutex_unlock(&watchdog.lock);
579 /* someone wrote to us, we should restart timer */
580 watchdog_keepalive();
582 return count;
586 * watchdog_ioctl:
587 * @inode: inode of the device
588 * @file: file handle to the device
589 * @cmd: watchdog command
590 * @arg: argument pointer
592 * The watchdog API defines a common set of functions for all watchdogs
593 * according to their available features.
595 static long watchdog_ioctl(struct file *file, unsigned int cmd,
596 unsigned long arg)
598 int status;
599 int new_options;
600 int new_timeout;
601 union {
602 struct watchdog_info __user *ident;
603 int __user *i;
604 } uarg;
606 uarg.i = (int __user *)arg;
608 switch (cmd) {
609 case WDIOC_GETSUPPORT:
610 return copy_to_user(uarg.ident, &watchdog.ident,
611 sizeof(watchdog.ident)) ? -EFAULT : 0;
613 case WDIOC_GETSTATUS:
614 status = watchdog_get_status();
615 if (status < 0)
616 return status;
617 return put_user(status, uarg.i);
619 case WDIOC_GETBOOTSTATUS:
620 return put_user(0, uarg.i);
622 case WDIOC_SETOPTIONS:
623 if (get_user(new_options, uarg.i))
624 return -EFAULT;
626 if (new_options & WDIOS_DISABLECARD)
627 watchdog_stop();
629 if (new_options & WDIOS_ENABLECARD)
630 return watchdog_start();
631 /* fall through */
633 case WDIOC_KEEPALIVE:
634 watchdog_keepalive();
635 return 0;
637 case WDIOC_SETTIMEOUT:
638 if (get_user(new_timeout, uarg.i))
639 return -EFAULT;
641 if (watchdog_set_timeout(new_timeout))
642 return -EINVAL;
644 watchdog_keepalive();
645 /* fall through */
647 case WDIOC_GETTIMEOUT:
648 return put_user(watchdog.timeout, uarg.i);
650 default:
651 return -ENOTTY;
656 static int watchdog_notify_sys(struct notifier_block *this, unsigned long code,
657 void *unused)
659 if (code == SYS_DOWN || code == SYS_HALT)
660 watchdog_stop();
661 return NOTIFY_DONE;
664 static const struct file_operations watchdog_fops = {
665 .owner = THIS_MODULE,
666 .llseek = no_llseek,
667 .open = watchdog_open,
668 .release = watchdog_release,
669 .write = watchdog_write,
670 .unlocked_ioctl = watchdog_ioctl,
673 static struct miscdevice watchdog_miscdev = {
674 .minor = WATCHDOG_MINOR,
675 .name = "watchdog",
676 .fops = &watchdog_fops,
679 static struct notifier_block watchdog_notifier = {
680 .notifier_call = watchdog_notify_sys,
683 static int __init watchdog_init(int sioaddr)
685 int wdt_conf, err = 0;
687 /* No need to lock watchdog.lock here because no entry points
688 * into the module have been registered yet.
690 watchdog.sioaddr = sioaddr;
691 watchdog.ident.options = WDIOC_SETTIMEOUT
692 | WDIOF_MAGICCLOSE
693 | WDIOF_KEEPALIVEPING;
695 snprintf(watchdog.ident.identity,
696 sizeof(watchdog.ident.identity), "%s watchdog",
697 f71808e_names[watchdog.type]);
699 err = superio_enter(sioaddr);
700 if (err)
701 return err;
702 superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
704 wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
705 watchdog.caused_reboot = wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS);
707 superio_exit(sioaddr);
709 err = watchdog_set_timeout(timeout);
710 if (err)
711 return err;
712 err = watchdog_set_pulse_width(pulse_width);
713 if (err)
714 return err;
716 err = register_reboot_notifier(&watchdog_notifier);
717 if (err)
718 return err;
720 err = misc_register(&watchdog_miscdev);
721 if (err) {
722 pr_err("cannot register miscdev on minor=%d\n",
723 watchdog_miscdev.minor);
724 goto exit_reboot;
727 if (start_withtimeout) {
728 if (start_withtimeout <= 0
729 || start_withtimeout > max_timeout) {
730 pr_err("starting timeout out of range\n");
731 err = -EINVAL;
732 goto exit_miscdev;
735 err = watchdog_start();
736 if (err) {
737 pr_err("cannot start watchdog timer\n");
738 goto exit_miscdev;
741 mutex_lock(&watchdog.lock);
742 err = superio_enter(sioaddr);
743 if (err)
744 goto exit_unlock;
745 superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
747 if (start_withtimeout > 0xff) {
748 /* select minutes for timer units */
749 superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF,
750 F71808FG_FLAG_WD_UNIT);
751 superio_outb(sioaddr, F71808FG_REG_WD_TIME,
752 DIV_ROUND_UP(start_withtimeout, 60));
753 } else {
754 /* select seconds for timer units */
755 superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF,
756 F71808FG_FLAG_WD_UNIT);
757 superio_outb(sioaddr, F71808FG_REG_WD_TIME,
758 start_withtimeout);
761 superio_exit(sioaddr);
762 mutex_unlock(&watchdog.lock);
764 if (nowayout)
765 __module_get(THIS_MODULE);
767 pr_info("watchdog started with initial timeout of %u sec\n",
768 start_withtimeout);
771 return 0;
773 exit_unlock:
774 mutex_unlock(&watchdog.lock);
775 exit_miscdev:
776 misc_deregister(&watchdog_miscdev);
777 exit_reboot:
778 unregister_reboot_notifier(&watchdog_notifier);
780 return err;
783 static int __init f71808e_find(int sioaddr)
785 u16 devid;
786 int err = superio_enter(sioaddr);
787 if (err)
788 return err;
790 devid = superio_inw(sioaddr, SIO_REG_MANID);
791 if (devid != SIO_FINTEK_ID) {
792 pr_debug("Not a Fintek device\n");
793 err = -ENODEV;
794 goto exit;
797 devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
798 switch (devid) {
799 case SIO_F71808_ID:
800 watchdog.type = f71808fg;
801 break;
802 case SIO_F71862_ID:
803 watchdog.type = f71862fg;
804 err = f71862fg_pin_configure(0); /* validate module parameter */
805 break;
806 case SIO_F71868_ID:
807 watchdog.type = f71868;
808 break;
809 case SIO_F71869_ID:
810 case SIO_F71869A_ID:
811 watchdog.type = f71869;
812 break;
813 case SIO_F71882_ID:
814 watchdog.type = f71882fg;
815 break;
816 case SIO_F71889_ID:
817 watchdog.type = f71889fg;
818 break;
819 case SIO_F71858_ID:
820 /* Confirmed (by datasheet) not to have a watchdog. */
821 err = -ENODEV;
822 goto exit;
823 case SIO_F81865_ID:
824 watchdog.type = f81865;
825 break;
826 case SIO_F81866_ID:
827 watchdog.type = f81866;
828 break;
829 default:
830 pr_info("Unrecognized Fintek device: %04x\n",
831 (unsigned int)devid);
832 err = -ENODEV;
833 goto exit;
836 pr_info("Found %s watchdog chip, revision %d\n",
837 f71808e_names[watchdog.type],
838 (int)superio_inb(sioaddr, SIO_REG_DEVREV));
839 exit:
840 superio_exit(sioaddr);
841 return err;
844 static int __init f71808e_init(void)
846 static const unsigned short addrs[] = { 0x2e, 0x4e };
847 int err = -ENODEV;
848 int i;
850 for (i = 0; i < ARRAY_SIZE(addrs); i++) {
851 err = f71808e_find(addrs[i]);
852 if (err == 0)
853 break;
855 if (i == ARRAY_SIZE(addrs))
856 return err;
858 return watchdog_init(addrs[i]);
861 static void __exit f71808e_exit(void)
863 if (watchdog_is_running()) {
864 pr_warn("Watchdog timer still running, stopping it\n");
865 watchdog_stop();
867 misc_deregister(&watchdog_miscdev);
868 unregister_reboot_notifier(&watchdog_notifier);
871 MODULE_DESCRIPTION("F71808E Watchdog Driver");
872 MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>");
873 MODULE_LICENSE("GPL");
875 module_init(f71808e_init);
876 module_exit(f71808e_exit);