2 * Watchdog driver for SiByte SB1 SoCs
4 * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@lsi.com>
6 * This driver is intended to make the second of two hardware watchdogs
7 * on the Sibyte 12XX and 11XX SoCs available to the user. There are two
8 * such devices available on the SoC, but it seems that there isn't an
9 * enumeration class for watchdogs in Linux like there is for RTCs.
10 * The second is used rather than the first because it uses IRQ 1,
11 * thereby avoiding all that IRQ 0 problematic nonsense.
13 * I have not tried this driver on a 1480 processor; it might work
14 * just well enough to really screw things up.
16 * It is a simple timer, and there is an interrupt that is raised the
17 * first time the timer expires. The second time it expires, the chip
18 * is reset and there is no way to redirect that NMI. Which could
19 * be problematic in some cases where this chip is sitting on the HT
20 * bus and has just taken responsibility for providing a cache block.
21 * Since the reset can't be redirected to the external reset pin, it is
22 * possible that other HT connected processors might hang and not reset.
23 * For Linux, a soft reset would probably be even worse than a hard reset.
26 * The timer takes 23 bits of a 64 bit register (?) as a count value,
27 * and decrements the count every microsecond, for a max value of
28 * 0x7fffff usec or about 8.3ish seconds.
30 * This watchdog borrows some user semantics from the softdog driver,
31 * in that if you close the fd, it leaves the watchdog running, unless
32 * you previously wrote a 'V' to the fd, in which case it disables
33 * the watchdog when you close the fd like some other drivers.
35 * Based on various other watchdog drivers, which are probably all
36 * loosely based on something Alan Cox wrote years ago.
38 * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
39 * All Rights Reserved.
41 * This program is free software; you can redistribute it and/or
42 * modify it under the terms of the GNU General Public License
43 * version 1 or 2 as published by the Free Software Foundation.
47 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
49 #include <linux/module.h>
51 #include <linux/uaccess.h>
53 #include <linux/reboot.h>
54 #include <linux/miscdevice.h>
55 #include <linux/watchdog.h>
56 #include <linux/interrupt.h>
58 #include <asm/sibyte/sb1250.h>
59 #include <asm/sibyte/sb1250_regs.h>
60 #include <asm/sibyte/sb1250_int.h>
61 #include <asm/sibyte/sb1250_scd.h>
63 static DEFINE_SPINLOCK(sbwd_lock
);
66 * set the initial count value of a timer
68 * wdog is the iomem address of the cfg register
70 void sbwdog_set(char __iomem
*wdog
, unsigned long t
)
72 spin_lock(&sbwd_lock
);
73 __raw_writeb(0, wdog
);
74 __raw_writeq(t
& 0x7fffffUL
, wdog
- 0x10);
75 spin_unlock(&sbwd_lock
);
79 * cause the timer to [re]load it's initial count and start counting
82 * wdog is the iomem address of the cfg register
84 void sbwdog_pet(char __iomem
*wdog
)
86 spin_lock(&sbwd_lock
);
87 __raw_writeb(__raw_readb(wdog
) | 1, wdog
);
88 spin_unlock(&sbwd_lock
);
91 static unsigned long sbwdog_gate
; /* keeps it to one thread only */
92 static char __iomem
*kern_dog
= (char __iomem
*)(IO_BASE
+ (A_SCD_WDOG_CFG_0
));
93 static char __iomem
*user_dog
= (char __iomem
*)(IO_BASE
+ (A_SCD_WDOG_CFG_1
));
94 static unsigned long timeout
= 0x7fffffUL
; /* useconds: 8.3ish secs. */
95 static int expect_close
;
97 static const struct watchdog_info ident
= {
98 .options
= WDIOF_CARDRESET
| WDIOF_SETTIMEOUT
|
99 WDIOF_KEEPALIVEPING
| WDIOF_MAGICCLOSE
,
100 .identity
= "SiByte Watchdog",
104 * Allow only a single thread to walk the dog
106 static int sbwdog_open(struct inode
*inode
, struct file
*file
)
108 nonseekable_open(inode
, file
);
109 if (test_and_set_bit(0, &sbwdog_gate
))
111 __module_get(THIS_MODULE
);
116 sbwdog_set(user_dog
, timeout
);
117 __raw_writeb(1, user_dog
);
123 * Put the dog back in the kennel.
125 static int sbwdog_release(struct inode
*inode
, struct file
*file
)
127 if (expect_close
== 42) {
128 __raw_writeb(0, user_dog
);
129 module_put(THIS_MODULE
);
131 pr_crit("%s: Unexpected close, not stopping watchdog!\n",
133 sbwdog_pet(user_dog
);
135 clear_bit(0, &sbwdog_gate
);
144 static ssize_t
sbwdog_write(struct file
*file
, const char __user
*data
,
145 size_t len
, loff_t
*ppos
)
155 for (i
= 0; i
!= len
; i
++) {
158 if (get_user(c
, data
+ i
))
163 sbwdog_pet(user_dog
);
169 static long sbwdog_ioctl(struct file
*file
, unsigned int cmd
,
174 void __user
*argp
= (void __user
*)arg
;
175 int __user
*p
= argp
;
178 case WDIOC_GETSUPPORT
:
179 ret
= copy_to_user(argp
, &ident
, sizeof(ident
)) ? -EFAULT
: 0;
182 case WDIOC_GETSTATUS
:
183 case WDIOC_GETBOOTSTATUS
:
184 ret
= put_user(0, p
);
187 case WDIOC_KEEPALIVE
:
188 sbwdog_pet(user_dog
);
192 case WDIOC_SETTIMEOUT
:
193 ret
= get_user(time
, p
);
198 if (time
> 0x7fffffUL
) {
203 sbwdog_set(user_dog
, timeout
);
204 sbwdog_pet(user_dog
);
206 case WDIOC_GETTIMEOUT
:
208 * get the remaining count from the ... count register
209 * which is 1*8 before the config register
211 ret
= put_user((u32
)__raw_readq(user_dog
- 8) / 1000000, p
);
218 * Notifier for system down
220 static int sbwdog_notify_sys(struct notifier_block
*this, unsigned long code
,
223 if (code
== SYS_DOWN
|| code
== SYS_HALT
) {
227 __raw_writeb(0, user_dog
);
228 __raw_writeb(0, kern_dog
);
234 static const struct file_operations sbwdog_fops
= {
235 .owner
= THIS_MODULE
,
237 .write
= sbwdog_write
,
238 .unlocked_ioctl
= sbwdog_ioctl
,
240 .release
= sbwdog_release
,
243 static struct miscdevice sbwdog_miscdev
= {
244 .minor
= WATCHDOG_MINOR
,
246 .fops
= &sbwdog_fops
,
249 static struct notifier_block sbwdog_notifier
= {
250 .notifier_call
= sbwdog_notify_sys
,
256 * doesn't do a whole lot for user, but oh so cleverly written so kernel
257 * code can use it to re-up the watchdog, thereby saving the kernel from
258 * having to create and maintain a timer, just to tickle another timer,
259 * which is just so wrong.
261 irqreturn_t
sbwdog_interrupt(int irq
, void *addr
)
263 unsigned long wd_init
;
264 char *wd_cfg_reg
= (char *)addr
;
267 cfg
= __raw_readb(wd_cfg_reg
);
268 wd_init
= __raw_readq(wd_cfg_reg
- 8) & 0x7fffff;
271 * if it's the second watchdog timer, it's for those users
273 if (wd_cfg_reg
== user_dog
)
274 pr_crit("%s in danger of initiating system reset "
275 "in %ld.%01ld seconds\n",
277 wd_init
/ 1000000, (wd_init
/ 100000) % 10);
281 __raw_writeb(cfg
, wd_cfg_reg
);
286 static int __init
sbwdog_init(void)
291 * register a reboot notifier
293 ret
= register_reboot_notifier(&sbwdog_notifier
);
295 pr_err("%s: cannot register reboot notifier (err=%d)\n",
296 ident
.identity
, ret
);
304 ret
= request_irq(1, sbwdog_interrupt
, IRQF_SHARED
,
305 ident
.identity
, (void *)user_dog
);
307 pr_err("%s: failed to request irq 1 - %d\n",
308 ident
.identity
, ret
);
312 ret
= misc_register(&sbwdog_miscdev
);
314 pr_info("%s: timeout is %ld.%ld secs\n",
316 timeout
/ 1000000, (timeout
/ 100000) % 10);
319 free_irq(1, (void *)user_dog
);
321 unregister_reboot_notifier(&sbwdog_notifier
);
326 static void __exit
sbwdog_exit(void)
328 misc_deregister(&sbwdog_miscdev
);
329 free_irq(1, (void *)user_dog
);
330 unregister_reboot_notifier(&sbwdog_notifier
);
333 module_init(sbwdog_init
);
334 module_exit(sbwdog_exit
);
336 MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>");
337 MODULE_DESCRIPTION("SiByte Watchdog");
339 module_param(timeout
, ulong
, 0);
340 MODULE_PARM_DESC(timeout
,
341 "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
343 MODULE_LICENSE("GPL");
346 * example code that can be put in a platform code area to utilize the
347 * first watchdog timer for the kernels own purpose.
349 void platform_wd_setup(void)
353 ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED,
354 "Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
356 pr_crit("Watchdog IRQ zero(0) failed to be requested - %d\n", ret);