[PATCH] tty_io.c balance tty_ldisc_ref()
[linux/fpc-iii.git] / include / asm-arm / arch-l7200 / pmu.h
blob57faea76d1b343dfc4e3f3d317783cbceca49177
1 /****************************************************************************/
2 /*
3 * linux/include/asm-arm/arch-l7200/pmu.h
5 * Registers and helper functions for the L7200 Link-Up Systems
6 * Power Management Unit (PMU).
8 * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive for
12 * more details.
15 /****************************************************************************/
17 #define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */
19 /* IO_START and IO_BASE are defined in hardware.h */
21 #define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */
22 #define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */
25 /* Define the PMU registers for use by device drivers and the kernel. */
27 typedef struct {
28 unsigned int CURRENT; /* Current configuration register */
29 unsigned int NEXT; /* Next configuration register */
30 unsigned int reserved;
31 unsigned int RUN; /* Run configuration register */
32 unsigned int COMM; /* Configuration command register */
33 unsigned int SDRAM; /* SDRAM configuration bypass register */
34 } pmu_interface;
36 #define PMU ((volatile pmu_interface *)(PMU_BASE))
39 /* Macro's for reading the common register fields. */
41 #define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */
42 #define GET_OSCEN(reg) ((reg >> 16) & 0x01)
43 #define GET_OSCMUX(reg) ((reg >> 15) & 0x01)
44 #define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */
45 #define GET_PLLEN(reg) ((reg >> 8) & 0x01)
46 #define GET_PLLMUX(reg) ((reg >> 7) & 0x01)
47 #define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */
48 #define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01)
49 #define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01)
50 #define GET_FASTBUS(reg) (reg & 0x1)
52 /* CFG_NEXT register */
54 #define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */
55 #define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01)
56 #define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01)
57 #define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01)
59 /* Useful field values that can be used to construct the
60 * CFG_NEXT and CFG_RUN registers.
63 #define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */
64 #define NOCHANGE_STALL 1<<25
65 #define CHANGE_NOSTALL 2<<25
66 #define CHANGE_STALL 3<<25
68 #define INTRET 1<<17
69 #define OSCEN 1<<16
70 #define OSCMUX 1<<15
72 /* PLL frequencies */
74 #define PLLMUL_0 0<<9 /* 3.6864 MHz */
75 #define PLLMUL_1 1<<9 /* ?????? MHz */
76 #define PLLMUL_5 5<<9 /* 18.432 MHz */
77 #define PLLMUL_10 10<<9 /* 36.864 MHz */
78 #define PLLMUL_18 18<<9 /* ?????? MHz */
79 #define PLLMUL_20 20<<9 /* 73.728 MHz */
80 #define PLLMUL_32 32<<9 /* ?????? MHz */
81 #define PLLMUL_35 35<<9 /* 129.024 MHz */
82 #define PLLMUL_36 36<<9 /* ?????? MHz */
83 #define PLLMUL_39 39<<9 /* ?????? MHz */
84 #define PLLMUL_40 40<<9 /* 147.456 MHz */
86 /* Clock recovery times */
88 #define CRCLOCK_1 1<<18
89 #define CRCLOCK_2 2<<18
90 #define CRCLOCK_4 4<<18
91 #define CRCLOCK_8 8<<18
92 #define CRCLOCK_16 16<<18
93 #define CRCLOCK_32 32<<18
94 #define CRCLOCK_63 63<<18
95 #define CRCLOCK_127 127<<18
97 #define PLLEN 1<<8
98 #define PLLMUX 1<<7
99 #define SDR_STOP 1<<6
100 #define SYSCLKEN 1<<5
102 #define BCLK_DIV_4 2<<3
103 #define BCLK_DIV_2 1<<3
104 #define BCLK_DIV_1 0<<3
106 #define SDRB_SEL 1<<2
107 #define SDRF_SEL 1<<1
108 #define FASTBUS 1<<0
111 /* CFG_SDRAM */
113 #define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */
114 #define SDRREFACK 1<<1 /* Read-only */
115 #define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */
116 #define SDRSTOPACK 1<<3 /* Read-only */
117 #define PICEN 1<<4 /* Enable Co-procesor */
118 #define PICTEST 1<<5
120 #define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01)
121 #define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
122 #define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01)
123 #define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
124 #define GET_PICEN ((PMU->SDRAM >> 4) & 0x01)
125 #define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01)