include/asm-arm/dma.h

   1 #ifndef __ASM_ARM_DMA_H
   2 #define __ASM_ARM_DMA_H
   3
   4 typedef unsigned int dmach_t;
   5
   6 #include <linux/spinlock.h>
   7 #include <asm/system.h>
   8 #include <asm/scatterlist.h>
   9 #include <asm/arch/dma.h>
  10
  11 /*
  12  * This is the maximum virtual address which can be DMA'd from.
  13  */
  14 #ifndef MAX_DMA_ADDRESS
  15 #define MAX_DMA_ADDRESS 0xffffffff
  16 #endif
  17
  18 /*
  19  * DMA modes
  20  */
  21 typedef unsigned int dmamode_t;
  22
  23 #define DMA_MODE_MASK   3
  24
  25 #define DMA_MODE_READ    0
  26 #define DMA_MODE_WRITE   1
  27 #define DMA_MODE_CASCADE 2
  28 #define DMA_AUTOINIT     4
  29
  30 extern spinlock_t  dma_spin_lock;
  31
  32 static inline unsigned long claim_dma_lock(void)
  33 {
  34         unsigned long flags;
  35         spin_lock_irqsave(&dma_spin_lock, flags);
  36         return flags;
  37 }
  38
  39 static inline void release_dma_lock(unsigned long flags)
  40 {
  41         spin_unlock_irqrestore(&dma_spin_lock, flags);
  42 }
  43
  44 /* Clear the 'DMA Pointer Flip Flop'.
  45  * Write 0 for LSB/MSB, 1 for MSB/LSB access.
  46  */
  47 #define clear_dma_ff(channel)
  48
  49 /* Set only the page register bits of the transfer address.
  50  *
  51  * NOTE: This is an architecture specific function, and should
  52  *       be hidden from the drivers
  53  */
  54 extern void set_dma_page(dmach_t channel, char pagenr);
  55
  56 /* Request a DMA channel
  57  *
  58  * Some architectures may need to do allocate an interrupt
  59  */
  60 extern int  request_dma(dmach_t channel, const char * device_id);
  61
  62 /* Free a DMA channel
  63  *
  64  * Some architectures may need to do free an interrupt
  65  */
  66 extern void free_dma(dmach_t channel);
  67
  68 /* Enable DMA for this channel
  69  *
  70  * On some architectures, this may have other side effects like
  71  * enabling an interrupt and setting the DMA registers.
  72  */
  73 extern void enable_dma(dmach_t channel);
  74
  75 /* Disable DMA for this channel
  76  *
  77  * On some architectures, this may have other side effects like
  78  * disabling an interrupt or whatever.
  79  */
  80 extern void disable_dma(dmach_t channel);
  81
  82 /* Test whether the specified channel has an active DMA transfer
  83  */
  84 extern int dma_channel_active(dmach_t channel);
  85
  86 /* Set the DMA scatter gather list for this channel
  87  *
  88  * This should not be called if a DMA channel is enabled,
  89  * especially since some DMA architectures don't update the
  90  * DMA address immediately, but defer it to the enable_dma().
  91  */
  92 extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
  93
  94 /* Set the DMA address for this channel
  95  *
  96  * This should not be called if a DMA channel is enabled,
  97  * especially since some DMA architectures don't update the
  98  * DMA address immediately, but defer it to the enable_dma().
  99  */
 100 extern void __set_dma_addr(dmach_t channel, void *addr);
 101 #define set_dma_addr(channel, addr)                             \
 102         __set_dma_addr(channel, bus_to_virt(addr))
 103
 104 /* Set the DMA byte count for this channel
 105  *
 106  * This should not be called if a DMA channel is enabled,
 107  * especially since some DMA architectures don't update the
 108  * DMA count immediately, but defer it to the enable_dma().
 109  */
 110 extern void set_dma_count(dmach_t channel, unsigned long count);
 111
 112 /* Set the transfer direction for this channel
 113  *
 114  * This should not be called if a DMA channel is enabled,
 115  * especially since some DMA architectures don't update the
 116  * DMA transfer direction immediately, but defer it to the
 117  * enable_dma().
 118  */
 119 extern void set_dma_mode(dmach_t channel, dmamode_t mode);
 120
 121 /* Set the transfer speed for this channel
 122  */
 123 extern void set_dma_speed(dmach_t channel, int cycle_ns);
 124
 125 /* Get DMA residue count. After a DMA transfer, this
 126  * should return zero. Reading this while a DMA transfer is
 127  * still in progress will return unpredictable results.
 128  * If called before the channel has been used, it may return 1.
 129  * Otherwise, it returns the number of _bytes_ left to transfer.
 130  */
 131 extern int  get_dma_residue(dmach_t channel);
 132
 133 #ifndef NO_DMA
 134 #define NO_DMA  255
 135 #endif
 136
 137 #ifdef CONFIG_PCI
 138 extern int isa_dma_bridge_buggy;
 139 #else
 140 #define isa_dma_bridge_buggy    (0)
 141 #endif
 142
 143 #endif /* _ARM_DMA_H */