drivers/acpi/executer/exresop.c

   1
   2 /******************************************************************************
   3  *
   4  * Module Name: exresop - AML Interpreter operand/object resolution
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2005, R. Byron Moore
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45
  46 #include <acpi/acpi.h>
  47 #include <acpi/amlcode.h>
  48 #include <acpi/acparser.h>
  49 #include <acpi/acinterp.h>
  50
  51
  52 #define _COMPONENT          ACPI_EXECUTER
  53          ACPI_MODULE_NAME    ("exresop")
  54
  55
  56 /*******************************************************************************
  57  *
  58  * FUNCTION:    acpi_ex_check_object_type
  59  *
  60  * PARAMETERS:  type_needed         Object type needed
  61  *              this_type           Actual object type
  62  *              Object              Object pointer
  63  *
  64  * RETURN:      Status
  65  *
  66  * DESCRIPTION: Check required type against actual type
  67  *
  68  ******************************************************************************/
  69
  70 acpi_status
  71 acpi_ex_check_object_type (
  72         acpi_object_type                type_needed,
  73         acpi_object_type                this_type,
  74         void                            *object)
  75 {
  76         ACPI_FUNCTION_NAME ("ex_check_object_type");
  77
  78
  79         if (type_needed == ACPI_TYPE_ANY) {
  80                 /* All types OK, so we don't perform any typechecks */
  81
  82                 return (AE_OK);
  83         }
  84
  85         if (type_needed == ACPI_TYPE_LOCAL_REFERENCE) {
  86                 /*
  87                  * Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
  88                  * objects and thus allow them to be targets.  (As per the ACPI
  89                  * specification, a store to a constant is a noop.)
  90                  */
  91                 if ((this_type == ACPI_TYPE_INTEGER) &&
  92                         (((union acpi_operand_object *) object)->common.flags & AOPOBJ_AML_CONSTANT)) {
  93                         return (AE_OK);
  94                 }
  95         }
  96
  97         if (type_needed != this_type) {
  98                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
  99                         "Needed [%s], found [%s] %p\n",
 100                         acpi_ut_get_type_name (type_needed),
 101                         acpi_ut_get_type_name (this_type), object));
 102
 103                 return (AE_AML_OPERAND_TYPE);
 104         }
 105
 106         return (AE_OK);
 107 }
 108
 109
 110 /*******************************************************************************
 111  *
 112  * FUNCTION:    acpi_ex_resolve_operands
 113  *
 114  * PARAMETERS:  Opcode              - Opcode being interpreted
 115  *              stack_ptr           - Pointer to the operand stack to be
 116  *                                    resolved
 117  *              walk_state          - Current state
 118  *
 119  * RETURN:      Status
 120  *
 121  * DESCRIPTION: Convert multiple input operands to the types required by the
 122  *              target operator.
 123  *
 124  *      Each 5-bit group in arg_types represents one required
 125  *      operand and indicates the required Type. The corresponding operand
 126  *      will be converted to the required type if possible, otherwise we
 127  *      abort with an exception.
 128  *
 129  ******************************************************************************/
 130
 131 acpi_status
 132 acpi_ex_resolve_operands (
 133         u16                             opcode,
 134         union acpi_operand_object       **stack_ptr,
 135         struct acpi_walk_state          *walk_state)
 136 {
 137         union acpi_operand_object       *obj_desc;
 138         acpi_status                     status = AE_OK;
 139         u8                              object_type;
 140         void                            *temp_node;
 141         u32                             arg_types;
 142         const struct acpi_opcode_info   *op_info;
 143         u32                             this_arg_type;
 144         acpi_object_type                type_needed;
 145
 146
 147         ACPI_FUNCTION_TRACE_U32 ("ex_resolve_operands", opcode);
 148
 149
 150         op_info = acpi_ps_get_opcode_info (opcode);
 151         if (op_info->class == AML_CLASS_UNKNOWN) {
 152                 return_ACPI_STATUS (AE_AML_BAD_OPCODE);
 153         }
 154
 155         arg_types = op_info->runtime_args;
 156         if (arg_types == ARGI_INVALID_OPCODE) {
 157                 ACPI_REPORT_ERROR (("resolve_operands: %X is not a valid AML opcode\n",
 158                         opcode));
 159
 160                 return_ACPI_STATUS (AE_AML_INTERNAL);
 161         }
 162
 163         ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Opcode %X [%s] required_operand_types=%8.8X \n",
 164                 opcode, op_info->name, arg_types));
 165
 166         /*
 167          * Normal exit is with (arg_types == 0) at end of argument list.
 168          * Function will return an exception from within the loop upon
 169          * finding an entry which is not (or cannot be converted
 170          * to) the required type; if stack underflows; or upon
 171          * finding a NULL stack entry (which should not happen).
 172          */
 173         while (GET_CURRENT_ARG_TYPE (arg_types)) {
 174                 if (!stack_ptr || !*stack_ptr) {
 175                         ACPI_REPORT_ERROR (("resolve_operands: Null stack entry at %p\n",
 176                                 stack_ptr));
 177
 178                         return_ACPI_STATUS (AE_AML_INTERNAL);
 179                 }
 180
 181                 /* Extract useful items */
 182
 183                 obj_desc = *stack_ptr;
 184
 185                 /* Decode the descriptor type */
 186
 187                 switch (ACPI_GET_DESCRIPTOR_TYPE (obj_desc)) {
 188                 case ACPI_DESC_TYPE_NAMED:
 189
 190                         /* Node */
 191
 192                         object_type = ((struct acpi_namespace_node *) obj_desc)->type;
 193                         break;
 194
 195
 196                 case ACPI_DESC_TYPE_OPERAND:
 197
 198                         /* ACPI internal object */
 199
 200                         object_type = ACPI_GET_OBJECT_TYPE (obj_desc);
 201
 202                         /* Check for bad acpi_object_type */
 203
 204                         if (!acpi_ut_valid_object_type (object_type)) {
 205                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Bad operand object type [%X]\n",
 206                                         object_type));
 207
 208                                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 209                         }
 210
 211                         if (object_type == (u8) ACPI_TYPE_LOCAL_REFERENCE) {
 212                                 /*
 213                                  * Decode the Reference
 214                                  */
 215                                 op_info = acpi_ps_get_opcode_info (opcode);
 216                                 if (op_info->class == AML_CLASS_UNKNOWN) {
 217                                         return_ACPI_STATUS (AE_AML_BAD_OPCODE);
 218                                 }
 219
 220                                 switch (obj_desc->reference.opcode) {
 221                                 case AML_DEBUG_OP:
 222                                 case AML_NAME_OP:
 223                                 case AML_INDEX_OP:
 224                                 case AML_REF_OF_OP:
 225                                 case AML_ARG_OP:
 226                                 case AML_LOCAL_OP:
 227                                 case AML_LOAD_OP:   /* ddb_handle from LOAD_OP or LOAD_TABLE_OP */
 228
 229                                         ACPI_DEBUG_ONLY_MEMBERS (ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 230                                                 "Operand is a Reference, ref_opcode [%s]\n",
 231                                                 (acpi_ps_get_opcode_info (obj_desc->reference.opcode))->name)));
 232                                         break;
 233
 234                                 default:
 235                                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 236                                                 "Operand is a Reference, Unknown Reference Opcode %X [%s]\n",
 237                                                 obj_desc->reference.opcode,
 238                                                 (acpi_ps_get_opcode_info (obj_desc->reference.opcode))->name));
 239
 240                                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 241                                 }
 242                         }
 243                         break;
 244
 245
 246                 default:
 247
 248                         /* Invalid descriptor */
 249
 250                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 251                                         "Invalid descriptor %p [%s]\n",
 252                                         obj_desc, acpi_ut_get_descriptor_name (obj_desc)));
 253
 254                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 255                 }
 256
 257
 258                 /*
 259                  * Get one argument type, point to the next
 260                  */
 261                 this_arg_type = GET_CURRENT_ARG_TYPE (arg_types);
 262                 INCREMENT_ARG_LIST (arg_types);
 263
 264                 /*
 265                  * Handle cases where the object does not need to be
 266                  * resolved to a value
 267                  */
 268                 switch (this_arg_type) {
 269                 case ARGI_REF_OR_STRING:        /* Can be a String or Reference */
 270
 271                         if ((ACPI_GET_DESCRIPTOR_TYPE (obj_desc) == ACPI_DESC_TYPE_OPERAND) &&
 272                                 (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_STRING)) {
 273                                 /*
 274                                  * String found - the string references a named object and must be
 275                                  * resolved to a node
 276                                  */
 277                                 goto next_operand;
 278                         }
 279
 280                         /* Else not a string - fall through to the normal Reference case below */
 281                         /*lint -fallthrough */
 282
 283                 case ARGI_REFERENCE:            /* References: */
 284                 case ARGI_INTEGER_REF:
 285                 case ARGI_OBJECT_REF:
 286                 case ARGI_DEVICE_REF:
 287                 case ARGI_TARGETREF:            /* Allows implicit conversion rules before store */
 288                 case ARGI_FIXED_TARGET:         /* No implicit conversion before store to target */
 289                 case ARGI_SIMPLE_TARGET:        /* Name, Local, or Arg - no implicit conversion  */
 290
 291                         /* Need an operand of type ACPI_TYPE_LOCAL_REFERENCE */
 292
 293                         if (ACPI_GET_DESCRIPTOR_TYPE (obj_desc) == ACPI_DESC_TYPE_NAMED) /* Node (name) ptr OK as-is */ {
 294                                 goto next_operand;
 295                         }
 296
 297                         status = acpi_ex_check_object_type (ACPI_TYPE_LOCAL_REFERENCE,
 298                                           object_type, obj_desc);
 299                         if (ACPI_FAILURE (status)) {
 300                                 return_ACPI_STATUS (status);
 301                         }
 302
 303                         if (AML_NAME_OP == obj_desc->reference.opcode) {
 304                                 /*
 305                                  * Convert an indirect name ptr to direct name ptr and put
 306                                  * it on the stack
 307                                  */
 308                                 temp_node = obj_desc->reference.object;
 309                                 acpi_ut_remove_reference (obj_desc);
 310                                 (*stack_ptr) = temp_node;
 311                         }
 312                         goto next_operand;
 313
 314
 315                 case ARGI_DATAREFOBJ:  /* Store operator only */
 316
 317                         /*
 318                          * We don't want to resolve index_op reference objects during
 319                          * a store because this would be an implicit de_ref_of operation.
 320                          * Instead, we just want to store the reference object.
 321                          * -- All others must be resolved below.
 322                          */
 323                         if ((opcode == AML_STORE_OP) &&
 324                                 (ACPI_GET_OBJECT_TYPE (*stack_ptr) == ACPI_TYPE_LOCAL_REFERENCE) &&
 325                                 ((*stack_ptr)->reference.opcode == AML_INDEX_OP)) {
 326                                 goto next_operand;
 327                         }
 328                         break;
 329
 330                 default:
 331                         /* All cases covered above */
 332                         break;
 333                 }
 334
 335
 336                 /*
 337                  * Resolve this object to a value
 338                  */
 339                 status = acpi_ex_resolve_to_value (stack_ptr, walk_state);
 340                 if (ACPI_FAILURE (status)) {
 341                         return_ACPI_STATUS (status);
 342                 }
 343
 344                 /* Get the resolved object */
 345
 346                 obj_desc = *stack_ptr;
 347
 348                 /*
 349                  * Check the resulting object (value) type
 350                  */
 351                 switch (this_arg_type) {
 352                 /*
 353                  * For the simple cases, only one type of resolved object
 354                  * is allowed
 355                  */
 356                 case ARGI_MUTEX:
 357
 358                         /* Need an operand of type ACPI_TYPE_MUTEX */
 359
 360                         type_needed = ACPI_TYPE_MUTEX;
 361                         break;
 362
 363                 case ARGI_EVENT:
 364
 365                         /* Need an operand of type ACPI_TYPE_EVENT */
 366
 367                         type_needed = ACPI_TYPE_EVENT;
 368                         break;
 369
 370                 case ARGI_PACKAGE:   /* Package */
 371
 372                         /* Need an operand of type ACPI_TYPE_PACKAGE */
 373
 374                         type_needed = ACPI_TYPE_PACKAGE;
 375                         break;
 376
 377                 case ARGI_ANYTYPE:
 378
 379                         /* Any operand type will do */
 380
 381                         type_needed = ACPI_TYPE_ANY;
 382                         break;
 383
 384                 case ARGI_DDBHANDLE:
 385
 386                         /* Need an operand of type ACPI_TYPE_DDB_HANDLE */
 387
 388                         type_needed = ACPI_TYPE_LOCAL_REFERENCE;
 389                         break;
 390
 391
 392                 /*
 393                  * The more complex cases allow multiple resolved object types
 394                  */
 395                 case ARGI_INTEGER:   /* Number */
 396
 397                         /*
 398                          * Need an operand of type ACPI_TYPE_INTEGER,
 399                          * But we can implicitly convert from a STRING or BUFFER
 400                          * Aka - "Implicit Source Operand Conversion"
 401                          */
 402                         status = acpi_ex_convert_to_integer (obj_desc, stack_ptr, 16);
 403                         if (ACPI_FAILURE (status)) {
 404                                 if (status == AE_TYPE) {
 405                                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 406                                                 "Needed [Integer/String/Buffer], found [%s] %p\n",
 407                                                 acpi_ut_get_object_type_name (obj_desc), obj_desc));
 408
 409                                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 410                                 }
 411
 412                                 return_ACPI_STATUS (status);
 413                         }
 414                         goto next_operand;
 415
 416
 417                 case ARGI_BUFFER:
 418
 419                         /*
 420                          * Need an operand of type ACPI_TYPE_BUFFER,
 421                          * But we can implicitly convert from a STRING or INTEGER
 422                          * Aka - "Implicit Source Operand Conversion"
 423                          */
 424                         status = acpi_ex_convert_to_buffer (obj_desc, stack_ptr);
 425                         if (ACPI_FAILURE (status)) {
 426                                 if (status == AE_TYPE) {
 427                                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 428                                                 "Needed [Integer/String/Buffer], found [%s] %p\n",
 429                                                 acpi_ut_get_object_type_name (obj_desc), obj_desc));
 430
 431                                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 432                                 }
 433
 434                                 return_ACPI_STATUS (status);
 435                         }
 436                         goto next_operand;
 437
 438
 439                 case ARGI_STRING:
 440
 441                         /*
 442                          * Need an operand of type ACPI_TYPE_STRING,
 443                          * But we can implicitly convert from a BUFFER or INTEGER
 444                          * Aka - "Implicit Source Operand Conversion"
 445                          */
 446                         status = acpi_ex_convert_to_string (obj_desc, stack_ptr,
 447                                          ACPI_IMPLICIT_CONVERT_HEX);
 448                         if (ACPI_FAILURE (status)) {
 449                                 if (status == AE_TYPE) {
 450                                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 451                                                 "Needed [Integer/String/Buffer], found [%s] %p\n",
 452                                                 acpi_ut_get_object_type_name (obj_desc), obj_desc));
 453
 454                                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 455                                 }
 456
 457                                 return_ACPI_STATUS (status);
 458                         }
 459                         goto next_operand;
 460
 461
 462                 case ARGI_COMPUTEDATA:
 463
 464                         /* Need an operand of type INTEGER, STRING or BUFFER */
 465
 466                         switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
 467                         case ACPI_TYPE_INTEGER:
 468                         case ACPI_TYPE_STRING:
 469                         case ACPI_TYPE_BUFFER:
 470
 471                                 /* Valid operand */
 472                            break;
 473
 474                         default:
 475                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 476                                         "Needed [Integer/String/Buffer], found [%s] %p\n",
 477                                         acpi_ut_get_object_type_name (obj_desc), obj_desc));
 478
 479                                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 480                         }
 481                         goto next_operand;
 482
 483
 484                 case ARGI_BUFFER_OR_STRING:
 485
 486                         /* Need an operand of type STRING or BUFFER */
 487
 488                         switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
 489                         case ACPI_TYPE_STRING:
 490                         case ACPI_TYPE_BUFFER:
 491
 492                                 /* Valid operand */
 493                            break;
 494
 495                         case ACPI_TYPE_INTEGER:
 496
 497                                 /* Highest priority conversion is to type Buffer */
 498
 499                                 status = acpi_ex_convert_to_buffer (obj_desc, stack_ptr);
 500                                 if (ACPI_FAILURE (status)) {
 501                                         return_ACPI_STATUS (status);
 502                                 }
 503                                 break;
 504
 505                         default:
 506                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 507                                         "Needed [Integer/String/Buffer], found [%s] %p\n",
 508                                         acpi_ut_get_object_type_name (obj_desc), obj_desc));
 509
 510                                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 511                         }
 512                         goto next_operand;
 513
 514
 515                 case ARGI_DATAOBJECT:
 516                         /*
 517                          * ARGI_DATAOBJECT is only used by the size_of operator.
 518                          * Need a buffer, string, package, or ref_of reference.
 519                          *
 520                          * The only reference allowed here is a direct reference to
 521                          * a namespace node.
 522                          */
 523                         switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
 524                         case ACPI_TYPE_PACKAGE:
 525                         case ACPI_TYPE_STRING:
 526                         case ACPI_TYPE_BUFFER:
 527                         case ACPI_TYPE_LOCAL_REFERENCE:
 528
 529                                 /* Valid operand */
 530                                 break;
 531
 532                         default:
 533                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 534                                         "Needed [Buffer/String/Package/Reference], found [%s] %p\n",
 535                                         acpi_ut_get_object_type_name (obj_desc), obj_desc));
 536
 537                                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 538                         }
 539                         goto next_operand;
 540
 541
 542                 case ARGI_COMPLEXOBJ:
 543
 544                         /* Need a buffer or package or (ACPI 2.0) String */
 545
 546                         switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
 547                         case ACPI_TYPE_PACKAGE:
 548                         case ACPI_TYPE_STRING:
 549                         case ACPI_TYPE_BUFFER:
 550
 551                                 /* Valid operand */
 552                                 break;
 553
 554                         default:
 555                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 556                                         "Needed [Buffer/String/Package], found [%s] %p\n",
 557                                         acpi_ut_get_object_type_name (obj_desc), obj_desc));
 558
 559                                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 560                         }
 561                         goto next_operand;
 562
 563
 564                 case ARGI_REGION_OR_FIELD:
 565
 566                         /* Need an operand of type ACPI_TYPE_REGION or a FIELD in a region */
 567
 568                         switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
 569                         case ACPI_TYPE_REGION:
 570                         case ACPI_TYPE_LOCAL_REGION_FIELD:
 571                         case ACPI_TYPE_LOCAL_BANK_FIELD:
 572                         case ACPI_TYPE_LOCAL_INDEX_FIELD:
 573
 574                                 /* Valid operand */
 575                                 break;
 576
 577                         default:
 578                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 579                                         "Needed [Region/region_field], found [%s] %p\n",
 580                                         acpi_ut_get_object_type_name (obj_desc), obj_desc));
 581
 582                                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 583                         }
 584                         goto next_operand;
 585
 586
 587                 case ARGI_DATAREFOBJ:
 588
 589                         /* Used by the Store() operator only */
 590
 591                         switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
 592                         case ACPI_TYPE_INTEGER:
 593                         case ACPI_TYPE_PACKAGE:
 594                         case ACPI_TYPE_STRING:
 595                         case ACPI_TYPE_BUFFER:
 596                         case ACPI_TYPE_BUFFER_FIELD:
 597                         case ACPI_TYPE_LOCAL_REFERENCE:
 598                         case ACPI_TYPE_LOCAL_REGION_FIELD:
 599                         case ACPI_TYPE_LOCAL_BANK_FIELD:
 600                         case ACPI_TYPE_LOCAL_INDEX_FIELD:
 601                         case ACPI_TYPE_DDB_HANDLE:
 602
 603                                 /* Valid operand */
 604                                 break;
 605
 606                         default:
 607
 608                                 if (acpi_gbl_enable_interpreter_slack) {
 609                                         /*
 610                                          * Enable original behavior of Store(), allowing any and all
 611                                          * objects as the source operand.  The ACPI spec does not
 612                                          * allow this, however.
 613                                          */
 614                                         break;
 615                                 }
 616
 617                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 618                                         "Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p\n",
 619                                         acpi_ut_get_object_type_name (obj_desc), obj_desc));
 620
 621                                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 622                         }
 623                         goto next_operand;
 624
 625
 626                 default:
 627
 628                         /* Unknown type */
 629
 630                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 631                                 "Internal - Unknown ARGI (required operand) type %X\n",
 632                                 this_arg_type));
 633
 634                         return_ACPI_STATUS (AE_BAD_PARAMETER);
 635                 }
 636
 637                 /*
 638                  * Make sure that the original object was resolved to the
 639                  * required object type (Simple cases only).
 640                  */
 641                 status = acpi_ex_check_object_type (type_needed,
 642                                   ACPI_GET_OBJECT_TYPE (*stack_ptr), *stack_ptr);
 643                 if (ACPI_FAILURE (status)) {
 644                         return_ACPI_STATUS (status);
 645                 }
 646
 647 next_operand:
 648                 /*
 649                  * If more operands needed, decrement stack_ptr to point
 650                  * to next operand on stack
 651                  */
 652                 if (GET_CURRENT_ARG_TYPE (arg_types)) {
 653                         stack_ptr--;
 654                 }
 655
 656         }   /* while (*Types) */
 657
 658         return_ACPI_STATUS (status);
 659 }
 660
 661