?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
p4-clockmod: Replace cpu_sibling_mask() with topology_sibling_cpumask()
[linux/fpc-iii.git] / drivers / tty / serial / pxa.c
blob9becba6548921116adae390af002290cb31e883a
1 /*
2 * Based on drivers/serial/8250.c by Russell King.
3 *
4 * Author: Nicolas Pitre
5 * Created: Feb 20, 2003
6 * Copyright: (C) 2003 Monta Vista Software, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * Note 1: This driver is made separate from the already too overloaded
14 * 8250.c because it needs some kirks of its own and that'll make it
15 * easier to add DMA support.
16 *
17 * Note 2: I'm too sick of device allocation policies for serial ports.
18 * If someone else wants to request an "official" allocation of major/minor
19 * for this driver please be my guest. And don't forget that new hardware
20 * to come from Intel might have more than 3 or 4 of those UARTs. Let's
21 * hope for a better port registration and dynamic device allocation scheme
22 * with the serial core maintainer satisfaction to appear soon.
23 */
24
25
26 #if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
27 #define SUPPORT_SYSRQ
28 #endif
29
30 #include <linux/module.h>
31 #include <linux/ioport.h>
32 #include <linux/init.h>
33 #include <linux/console.h>
34 #include <linux/sysrq.h>
35 #include <linux/serial_reg.h>
36 #include <linux/circ_buf.h>
37 #include <linux/delay.h>
38 #include <linux/interrupt.h>
39 #include <linux/of.h>
40 #include <linux/platform_device.h>
41 #include <linux/tty.h>
42 #include <linux/tty_flip.h>
43 #include <linux/serial_core.h>
44 #include <linux/clk.h>
45 #include <linux/io.h>
46 #include <linux/slab.h>
47
48 #define PXA_NAME_LEN 8
49
50 struct uart_pxa_port {
51 struct uart_port port;
52 unsigned char ier;
53 unsigned char lcr;
54 unsigned char mcr;
55 unsigned int lsr_break_flag;
56 struct clk *clk;
57 char name[PXA_NAME_LEN];
58 };
59
60 static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
61 {
62 offset <<= 2;
63 return readl(up->port.membase + offset);
64 }
65
66 static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
67 {
68 offset <<= 2;
69 writel(value, up->port.membase + offset);
70 }
71
72 static void serial_pxa_enable_ms(struct uart_port *port)
73 {
74 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
75
76 up->ier |= UART_IER_MSI;
77 serial_out(up, UART_IER, up->ier);
78 }
79
80 static void serial_pxa_stop_tx(struct uart_port *port)
81 {
82 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
83
84 if (up->ier & UART_IER_THRI) {
85 up->ier &= ~UART_IER_THRI;
86 serial_out(up, UART_IER, up->ier);
87 }
88 }
89
90 static void serial_pxa_stop_rx(struct uart_port *port)
91 {
92 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
93
94 up->ier &= ~UART_IER_RLSI;
95 up->port.read_status_mask &= ~UART_LSR_DR;
96 serial_out(up, UART_IER, up->ier);
97 }
98
99 static inline void receive_chars(struct uart_pxa_port *up, int *status)
100 {
101 unsigned int ch, flag;
102 int max_count = 256;
103
104 do {
105 /* work around Errata #20 according to
106 * Intel(R) PXA27x Processor Family
107 * Specification Update (May 2005)
108 *
109 * Step 2
110 * Disable the Reciever Time Out Interrupt via IER[RTOEI]
111 */
112 up->ier &= ~UART_IER_RTOIE;
113 serial_out(up, UART_IER, up->ier);
114
115 ch = serial_in(up, UART_RX);
116 flag = TTY_NORMAL;
117 up->port.icount.rx++;
118
119 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
120 UART_LSR_FE | UART_LSR_OE))) {
121 /*
122 * For statistics only
123 */
124 if (*status & UART_LSR_BI) {
125 *status &= ~(UART_LSR_FE | UART_LSR_PE);
126 up->port.icount.brk++;
127 /*
128 * We do the SysRQ and SAK checking
129 * here because otherwise the break
130 * may get masked by ignore_status_mask
131 * or read_status_mask.
132 */
133 if (uart_handle_break(&up->port))
134 goto ignore_char;
135 } else if (*status & UART_LSR_PE)
136 up->port.icount.parity++;
137 else if (*status & UART_LSR_FE)
138 up->port.icount.frame++;
139 if (*status & UART_LSR_OE)
140 up->port.icount.overrun++;
141
142 /*
143 * Mask off conditions which should be ignored.
144 */
145 *status &= up->port.read_status_mask;
146
147 #ifdef CONFIG_SERIAL_PXA_CONSOLE
148 if (up->port.line == up->port.cons->index) {
149 /* Recover the break flag from console xmit */
150 *status |= up->lsr_break_flag;
151 up->lsr_break_flag = 0;
152 }
153 #endif
154 if (*status & UART_LSR_BI) {
155 flag = TTY_BREAK;
156 } else if (*status & UART_LSR_PE)
157 flag = TTY_PARITY;
158 else if (*status & UART_LSR_FE)
159 flag = TTY_FRAME;
160 }
161
162 if (uart_handle_sysrq_char(&up->port, ch))
163 goto ignore_char;
164
165 uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
166
167 ignore_char:
168 *status = serial_in(up, UART_LSR);
169 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
170 tty_flip_buffer_push(&up->port.state->port);
171
172 /* work around Errata #20 according to
173 * Intel(R) PXA27x Processor Family
174 * Specification Update (May 2005)
175 *
176 * Step 6:
177 * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE]
178 */
179 up->ier |= UART_IER_RTOIE;
180 serial_out(up, UART_IER, up->ier);
181 }
182
183 static void transmit_chars(struct uart_pxa_port *up)
184 {
185 struct circ_buf *xmit = &up->port.state->xmit;
186 int count;
187
188 if (up->port.x_char) {
189 serial_out(up, UART_TX, up->port.x_char);
190 up->port.icount.tx++;
191 up->port.x_char = 0;
192 return;
193 }
194 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
195 serial_pxa_stop_tx(&up->port);
196 return;
197 }
198
199 count = up->port.fifosize / 2;
200 do {
201 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
202 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
203 up->port.icount.tx++;
204 if (uart_circ_empty(xmit))
205 break;
206 } while (--count > 0);
207
208 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
209 uart_write_wakeup(&up->port);
210
211
212 if (uart_circ_empty(xmit))
213 serial_pxa_stop_tx(&up->port);
214 }
215
216 static void serial_pxa_start_tx(struct uart_port *port)
217 {
218 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
219
220 if (!(up->ier & UART_IER_THRI)) {
221 up->ier |= UART_IER_THRI;
222 serial_out(up, UART_IER, up->ier);
223 }
224 }
225
226 /* should hold up->port.lock */
227 static inline void check_modem_status(struct uart_pxa_port *up)
228 {
229 int status;
230
231 status = serial_in(up, UART_MSR);
232
233 if ((status & UART_MSR_ANY_DELTA) == 0)
234 return;
235
236 if (status & UART_MSR_TERI)
237 up->port.icount.rng++;
238 if (status & UART_MSR_DDSR)
239 up->port.icount.dsr++;
240 if (status & UART_MSR_DDCD)
241 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
242 if (status & UART_MSR_DCTS)
243 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
244
245 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
246 }
247
248 /*
249 * This handles the interrupt from one port.
250 */
251 static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
252 {
253 struct uart_pxa_port *up = dev_id;
254 unsigned int iir, lsr;
255
256 iir = serial_in(up, UART_IIR);
257 if (iir & UART_IIR_NO_INT)
258 return IRQ_NONE;
259 spin_lock(&up->port.lock);
260 lsr = serial_in(up, UART_LSR);
261 if (lsr & UART_LSR_DR)
262 receive_chars(up, &lsr);
263 check_modem_status(up);
264 if (lsr & UART_LSR_THRE)
265 transmit_chars(up);
266 spin_unlock(&up->port.lock);
267 return IRQ_HANDLED;
268 }
269
270 static unsigned int serial_pxa_tx_empty(struct uart_port *port)
271 {
272 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
273 unsigned long flags;
274 unsigned int ret;
275
276 spin_lock_irqsave(&up->port.lock, flags);
277 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
278 spin_unlock_irqrestore(&up->port.lock, flags);
279
280 return ret;
281 }
282
283 static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
284 {
285 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
286 unsigned char status;
287 unsigned int ret;
288
289 status = serial_in(up, UART_MSR);
290
291 ret = 0;
292 if (status & UART_MSR_DCD)
293 ret |= TIOCM_CAR;
294 if (status & UART_MSR_RI)
295 ret |= TIOCM_RNG;
296 if (status & UART_MSR_DSR)
297 ret |= TIOCM_DSR;
298 if (status & UART_MSR_CTS)
299 ret |= TIOCM_CTS;
300 return ret;
301 }
302
303 static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
304 {
305 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
306 unsigned char mcr = 0;
307
308 if (mctrl & TIOCM_RTS)
309 mcr |= UART_MCR_RTS;
310 if (mctrl & TIOCM_DTR)
311 mcr |= UART_MCR_DTR;
312 if (mctrl & TIOCM_OUT1)
313 mcr |= UART_MCR_OUT1;
314 if (mctrl & TIOCM_OUT2)
315 mcr |= UART_MCR_OUT2;
316 if (mctrl & TIOCM_LOOP)
317 mcr |= UART_MCR_LOOP;
318
319 mcr |= up->mcr;
320
321 serial_out(up, UART_MCR, mcr);
322 }
323
324 static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
325 {
326 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
327 unsigned long flags;
328
329 spin_lock_irqsave(&up->port.lock, flags);
330 if (break_state == -1)
331 up->lcr |= UART_LCR_SBC;
332 else
333 up->lcr &= ~UART_LCR_SBC;
334 serial_out(up, UART_LCR, up->lcr);
335 spin_unlock_irqrestore(&up->port.lock, flags);
336 }
337
338 static int serial_pxa_startup(struct uart_port *port)
339 {
340 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
341 unsigned long flags;
342 int retval;
343
344 if (port->line == 3) /* HWUART */
345 up->mcr |= UART_MCR_AFE;
346 else
347 up->mcr = 0;
348
349 up->port.uartclk = clk_get_rate(up->clk);
350
351 /*
352 * Allocate the IRQ
353 */
354 retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
355 if (retval)
356 return retval;
357
358 /*
359 * Clear the FIFO buffers and disable them.
360 * (they will be reenabled in set_termios())
361 */
362 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
363 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
364 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
365 serial_out(up, UART_FCR, 0);
366
367 /*
368 * Clear the interrupt registers.
369 */
370 (void) serial_in(up, UART_LSR);
371 (void) serial_in(up, UART_RX);
372 (void) serial_in(up, UART_IIR);
373 (void) serial_in(up, UART_MSR);
374
375 /*
376 * Now, initialize the UART
377 */
378 serial_out(up, UART_LCR, UART_LCR_WLEN8);
379
380 spin_lock_irqsave(&up->port.lock, flags);
381 up->port.mctrl |= TIOCM_OUT2;
382 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
383 spin_unlock_irqrestore(&up->port.lock, flags);
384
385 /*
386 * Finally, enable interrupts. Note: Modem status interrupts
387 * are set via set_termios(), which will be occurring imminently
388 * anyway, so we don't enable them here.
389 */
390 up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
391 serial_out(up, UART_IER, up->ier);
392
393 /*
394 * And clear the interrupt registers again for luck.
395 */
396 (void) serial_in(up, UART_LSR);
397 (void) serial_in(up, UART_RX);
398 (void) serial_in(up, UART_IIR);
399 (void) serial_in(up, UART_MSR);
400
401 return 0;
402 }
403
404 static void serial_pxa_shutdown(struct uart_port *port)
405 {
406 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
407 unsigned long flags;
408
409 free_irq(up->port.irq, up);
410
411 /*
412 * Disable interrupts from this port
413 */
414 up->ier = 0;
415 serial_out(up, UART_IER, 0);
416
417 spin_lock_irqsave(&up->port.lock, flags);
418 up->port.mctrl &= ~TIOCM_OUT2;
419 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
420 spin_unlock_irqrestore(&up->port.lock, flags);
421
422 /*
423 * Disable break condition and FIFOs
424 */
425 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
426 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
427 UART_FCR_CLEAR_RCVR |
428 UART_FCR_CLEAR_XMIT);
429 serial_out(up, UART_FCR, 0);
430 }
431
432 static void
433 serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
434 struct ktermios *old)
435 {
436 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
437 unsigned char cval, fcr = 0;
438 unsigned long flags;
439 unsigned int baud, quot;
440 unsigned int dll;
441
442 switch (termios->c_cflag & CSIZE) {
443 case CS5:
444 cval = UART_LCR_WLEN5;
445 break;
446 case CS6:
447 cval = UART_LCR_WLEN6;
448 break;
449 case CS7:
450 cval = UART_LCR_WLEN7;
451 break;
452 default:
453 case CS8:
454 cval = UART_LCR_WLEN8;
455 break;
456 }
457
458 if (termios->c_cflag & CSTOPB)
459 cval |= UART_LCR_STOP;
460 if (termios->c_cflag & PARENB)
461 cval |= UART_LCR_PARITY;
462 if (!(termios->c_cflag & PARODD))
463 cval |= UART_LCR_EPAR;
464
465 /*
466 * Ask the core to calculate the divisor for us.
467 */
468 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
469 quot = uart_get_divisor(port, baud);
470
471 if ((up->port.uartclk / quot) < (2400 * 16))
472 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
473 else if ((up->port.uartclk / quot) < (230400 * 16))
474 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
475 else
476 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
477
478 /*
479 * Ok, we're now changing the port state. Do it with
480 * interrupts disabled.
481 */
482 spin_lock_irqsave(&up->port.lock, flags);
483
484 /*
485 * Ensure the port will be enabled.
486 * This is required especially for serial console.
487 */
488 up->ier |= UART_IER_UUE;
489
490 /*
491 * Update the per-port timeout.
492 */
493 uart_update_timeout(port, termios->c_cflag, baud);
494
495 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
496 if (termios->c_iflag & INPCK)
497 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
498 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
499 up->port.read_status_mask |= UART_LSR_BI;
500
501 /*
502 * Characters to ignore
503 */
504 up->port.ignore_status_mask = 0;
505 if (termios->c_iflag & IGNPAR)
506 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
507 if (termios->c_iflag & IGNBRK) {
508 up->port.ignore_status_mask |= UART_LSR_BI;
509 /*
510 * If we're ignoring parity and break indicators,
511 * ignore overruns too (for real raw support).
512 */
513 if (termios->c_iflag & IGNPAR)
514 up->port.ignore_status_mask |= UART_LSR_OE;
515 }
516
517 /*
518 * ignore all characters if CREAD is not set
519 */
520 if ((termios->c_cflag & CREAD) == 0)
521 up->port.ignore_status_mask |= UART_LSR_DR;
522
523 /*
524 * CTS flow control flag and modem status interrupts
525 */
526 up->ier &= ~UART_IER_MSI;
527 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
528 up->ier |= UART_IER_MSI;
529
530 serial_out(up, UART_IER, up->ier);
531
532 if (termios->c_cflag & CRTSCTS)
533 up->mcr |= UART_MCR_AFE;
534 else
535 up->mcr &= ~UART_MCR_AFE;
536
537 serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
538 serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
539
540 /*
541 * work around Errata #75 according to Intel(R) PXA27x Processor Family
542 * Specification Update (Nov 2005)
543 */
544 dll = serial_in(up, UART_DLL);
545 WARN_ON(dll != (quot & 0xff));
546
547 serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
548 serial_out(up, UART_LCR, cval); /* reset DLAB */
549 up->lcr = cval; /* Save LCR */
550 serial_pxa_set_mctrl(&up->port, up->port.mctrl);
551 serial_out(up, UART_FCR, fcr);
552 spin_unlock_irqrestore(&up->port.lock, flags);
553 }
554
555 static void
556 serial_pxa_pm(struct uart_port *port, unsigned int state,
557 unsigned int oldstate)
558 {
559 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
560
561 if (!state)
562 clk_prepare_enable(up->clk);
563 else
564 clk_disable_unprepare(up->clk);
565 }
566
567 static void serial_pxa_release_port(struct uart_port *port)
568 {
569 }
570
571 static int serial_pxa_request_port(struct uart_port *port)
572 {
573 return 0;
574 }
575
576 static void serial_pxa_config_port(struct uart_port *port, int flags)
577 {
578 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
579 up->port.type = PORT_PXA;
580 }
581
582 static int
583 serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
584 {
585 /* we don't want the core code to modify any port params */
586 return -EINVAL;
587 }
588
589 static const char *
590 serial_pxa_type(struct uart_port *port)
591 {
592 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
593 return up->name;
594 }
595
596 static struct uart_pxa_port *serial_pxa_ports[4];
597 static struct uart_driver serial_pxa_reg;
598
599 #ifdef CONFIG_SERIAL_PXA_CONSOLE
600
601 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
602
603 /*
604 * Wait for transmitter & holding register to empty
605 */
606 static inline void wait_for_xmitr(struct uart_pxa_port *up)
607 {
608 unsigned int status, tmout = 10000;
609
610 /* Wait up to 10ms for the character(s) to be sent. */
611 do {
612 status = serial_in(up, UART_LSR);
613
614 if (status & UART_LSR_BI)
615 up->lsr_break_flag = UART_LSR_BI;
616
617 if (--tmout == 0)
618 break;
619 udelay(1);
620 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
621
622 /* Wait up to 1s for flow control if necessary */
623 if (up->port.flags & UPF_CONS_FLOW) {
624 tmout = 1000000;
625 while (--tmout &&
626 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
627 udelay(1);
628 }
629 }
630
631 static void serial_pxa_console_putchar(struct uart_port *port, int ch)
632 {
633 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
634
635 wait_for_xmitr(up);
636 serial_out(up, UART_TX, ch);
637 }
638
639 /*
640 * Print a string to the serial port trying not to disturb
641 * any possible real use of the port...
642 *
643 * The console_lock must be held when we get here.
644 */
645 static void
646 serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
647 {
648 struct uart_pxa_port *up = serial_pxa_ports[co->index];
649 unsigned int ier;
650 unsigned long flags;
651 int locked = 1;
652
653 clk_enable(up->clk);
654 local_irq_save(flags);
655 if (up->port.sysrq)
656 locked = 0;
657 else if (oops_in_progress)
658 locked = spin_trylock(&up->port.lock);
659 else
660 spin_lock(&up->port.lock);
661
662 /*
663 * First save the IER then disable the interrupts
664 */
665 ier = serial_in(up, UART_IER);
666 serial_out(up, UART_IER, UART_IER_UUE);
667
668 uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
669
670 /*
671 * Finally, wait for transmitter to become empty
672 * and restore the IER
673 */
674 wait_for_xmitr(up);
675 serial_out(up, UART_IER, ier);
676
677 if (locked)
678 spin_unlock(&up->port.lock);
679 local_irq_restore(flags);
680 clk_disable(up->clk);
681
682 }
683
684 #ifdef CONFIG_CONSOLE_POLL
685 /*
686 * Console polling routines for writing and reading from the uart while
687 * in an interrupt or debug context.
688 */
689
690 static int serial_pxa_get_poll_char(struct uart_port *port)
691 {
692 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
693 unsigned char lsr = serial_in(up, UART_LSR);
694
695 while (!(lsr & UART_LSR_DR))
696 lsr = serial_in(up, UART_LSR);
697
698 return serial_in(up, UART_RX);
699 }
700
701
702 static void serial_pxa_put_poll_char(struct uart_port *port,
703 unsigned char c)
704 {
705 unsigned int ier;
706 struct uart_pxa_port *up = (struct uart_pxa_port *)port;
707
708 /*
709 * First save the IER then disable the interrupts
710 */
711 ier = serial_in(up, UART_IER);
712 serial_out(up, UART_IER, UART_IER_UUE);
713
714 wait_for_xmitr(up);
715 /*
716 * Send the character out.
717 */
718 serial_out(up, UART_TX, c);
719
720 /*
721 * Finally, wait for transmitter to become empty
722 * and restore the IER
723 */
724 wait_for_xmitr(up);
725 serial_out(up, UART_IER, ier);
726 }
727
728 #endif /* CONFIG_CONSOLE_POLL */
729
730 static int __init
731 serial_pxa_console_setup(struct console *co, char *options)
732 {
733 struct uart_pxa_port *up;
734 int baud = 9600;
735 int bits = 8;
736 int parity = 'n';
737 int flow = 'n';
738
739 if (co->index == -1 || co->index >= serial_pxa_reg.nr)
740 co->index = 0;
741 up = serial_pxa_ports[co->index];
742 if (!up)
743 return -ENODEV;
744
745 if (options)
746 uart_parse_options(options, &baud, &parity, &bits, &flow);
747
748 return uart_set_options(&up->port, co, baud, parity, bits, flow);
749 }
750
751 static struct console serial_pxa_console = {
752 .name = "ttyS",
753 .write = serial_pxa_console_write,
754 .device = uart_console_device,
755 .setup = serial_pxa_console_setup,
756 .flags = CON_PRINTBUFFER,
757 .index = -1,
758 .data = &serial_pxa_reg,
759 };
760
761 #define PXA_CONSOLE &serial_pxa_console
762 #else
763 #define PXA_CONSOLE NULL
764 #endif
765
766 static struct uart_ops serial_pxa_pops = {
767 .tx_empty = serial_pxa_tx_empty,
768 .set_mctrl = serial_pxa_set_mctrl,
769 .get_mctrl = serial_pxa_get_mctrl,
770 .stop_tx = serial_pxa_stop_tx,
771 .start_tx = serial_pxa_start_tx,
772 .stop_rx = serial_pxa_stop_rx,
773 .enable_ms = serial_pxa_enable_ms,
774 .break_ctl = serial_pxa_break_ctl,
775 .startup = serial_pxa_startup,
776 .shutdown = serial_pxa_shutdown,
777 .set_termios = serial_pxa_set_termios,
778 .pm = serial_pxa_pm,
779 .type = serial_pxa_type,
780 .release_port = serial_pxa_release_port,
781 .request_port = serial_pxa_request_port,
782 .config_port = serial_pxa_config_port,
783 .verify_port = serial_pxa_verify_port,
784 #if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_PXA_CONSOLE)
785 .poll_get_char = serial_pxa_get_poll_char,
786 .poll_put_char = serial_pxa_put_poll_char,
787 #endif
788 };
789
790 static struct uart_driver serial_pxa_reg = {
791 .owner = THIS_MODULE,
792 .driver_name = "PXA serial",
793 .dev_name = "ttyS",
794 .major = TTY_MAJOR,
795 .minor = 64,
796 .nr = 4,
797 .cons = PXA_CONSOLE,
798 };
799
800 #ifdef CONFIG_PM
801 static int serial_pxa_suspend(struct device *dev)
802 {
803 struct uart_pxa_port *sport = dev_get_drvdata(dev);
804
805 if (sport)
806 uart_suspend_port(&serial_pxa_reg, &sport->port);
807
808 return 0;
809 }
810
811 static int serial_pxa_resume(struct device *dev)
812 {
813 struct uart_pxa_port *sport = dev_get_drvdata(dev);
814
815 if (sport)
816 uart_resume_port(&serial_pxa_reg, &sport->port);
817
818 return 0;
819 }
820
821 static const struct dev_pm_ops serial_pxa_pm_ops = {
822 .suspend = serial_pxa_suspend,
823 .resume = serial_pxa_resume,
824 };
825 #endif
826
827 static const struct of_device_id serial_pxa_dt_ids[] = {
828 { .compatible = "mrvl,pxa-uart", },
829 { .compatible = "mrvl,mmp-uart", },
830 {}
831 };
832 MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
833
834 static int serial_pxa_probe_dt(struct platform_device *pdev,
835 struct uart_pxa_port *sport)
836 {
837 struct device_node *np = pdev->dev.of_node;
838 int ret;
839
840 if (!np)
841 return 1;
842
843 ret = of_alias_get_id(np, "serial");
844 if (ret < 0) {
845 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
846 return ret;
847 }
848 sport->port.line = ret;
849 return 0;
850 }
851
852 static int serial_pxa_probe(struct platform_device *dev)
853 {
854 struct uart_pxa_port *sport;
855 struct resource *mmres, *irqres;
856 int ret;
857
858 mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
859 irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
860 if (!mmres || !irqres)
861 return -ENODEV;
862
863 sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
864 if (!sport)
865 return -ENOMEM;
866
867 sport->clk = clk_get(&dev->dev, NULL);
868 if (IS_ERR(sport->clk)) {
869 ret = PTR_ERR(sport->clk);
870 goto err_free;
871 }
872
873 ret = clk_prepare(sport->clk);
874 if (ret) {
875 clk_put(sport->clk);
876 goto err_free;
877 }
878
879 sport->port.type = PORT_PXA;
880 sport->port.iotype = UPIO_MEM;
881 sport->port.mapbase = mmres->start;
882 sport->port.irq = irqres->start;
883 sport->port.fifosize = 64;
884 sport->port.ops = &serial_pxa_pops;
885 sport->port.dev = &dev->dev;
886 sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
887 sport->port.uartclk = clk_get_rate(sport->clk);
888
889 ret = serial_pxa_probe_dt(dev, sport);
890 if (ret > 0)
891 sport->port.line = dev->id;
892 else if (ret < 0)
893 goto err_clk;
894 snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1);
895
896 sport->port.membase = ioremap(mmres->start, resource_size(mmres));
897 if (!sport->port.membase) {
898 ret = -ENOMEM;
899 goto err_clk;
900 }
901
902 serial_pxa_ports[sport->port.line] = sport;
903
904 uart_add_one_port(&serial_pxa_reg, &sport->port);
905 platform_set_drvdata(dev, sport);
906
907 return 0;
908
909 err_clk:
910 clk_unprepare(sport->clk);
911 clk_put(sport->clk);
912 err_free:
913 kfree(sport);
914 return ret;
915 }
916
917 static int serial_pxa_remove(struct platform_device *dev)
918 {
919 struct uart_pxa_port *sport = platform_get_drvdata(dev);
920
921 uart_remove_one_port(&serial_pxa_reg, &sport->port);
922
923 clk_unprepare(sport->clk);
924 clk_put(sport->clk);
925 kfree(sport);
926
927 return 0;
928 }
929
930 static struct platform_driver serial_pxa_driver = {
931 .probe = serial_pxa_probe,
932 .remove = serial_pxa_remove,
933
934 .driver = {
935 .name = "pxa2xx-uart",
936 #ifdef CONFIG_PM
937 .pm = &serial_pxa_pm_ops,
938 #endif
939 .of_match_table = serial_pxa_dt_ids,
940 },
941 };
942
943 static int __init serial_pxa_init(void)
944 {
945 int ret;
946
947 ret = uart_register_driver(&serial_pxa_reg);
948 if (ret != 0)
949 return ret;
950
951 ret = platform_driver_register(&serial_pxa_driver);
952 if (ret != 0)
953 uart_unregister_driver(&serial_pxa_reg);
954
955 return ret;
956 }
957
958 static void __exit serial_pxa_exit(void)
959 {
960 platform_driver_unregister(&serial_pxa_driver);
961 uart_unregister_driver(&serial_pxa_reg);
962 }
963
964 module_init(serial_pxa_init);
965 module_exit(serial_pxa_exit);
966
967 MODULE_LICENSE("GPL");
968 MODULE_ALIAS("platform:pxa2xx-uart");
Linux with added FPC-III support