?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
p4-clockmod: Replace cpu_sibling_mask() with topology_sibling_cpumask()
[linux/fpc-iii.git] / drivers / tty / serial / sunsu.c
blobe124d2e88996fd93f1a10296133c669c18c4fdec
1 /*
2 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
3 *
4 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
5 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
6 *
7 * This is mainly a variation of 8250.c, credits go to authors mentioned
8 * therein. In fact this driver should be merged into the generic 8250.c
9 * infrastructure perhaps using a 8250_sparc.c module.
10 *
11 * Fixed to use tty_get_baud_rate().
12 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
13 *
14 * Converted to new 2.5.x UART layer.
15 * David S. Miller (davem@davemloft.net), 2002-Jul-29
16 */
17
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/spinlock.h>
21 #include <linux/errno.h>
22 #include <linux/tty.h>
23 #include <linux/tty_flip.h>
24 #include <linux/major.h>
25 #include <linux/string.h>
26 #include <linux/ptrace.h>
27 #include <linux/ioport.h>
28 #include <linux/circ_buf.h>
29 #include <linux/serial.h>
30 #include <linux/sysrq.h>
31 #include <linux/console.h>
32 #include <linux/slab.h>
33 #ifdef CONFIG_SERIO
34 #include <linux/serio.h>
35 #endif
36 #include <linux/serial_reg.h>
37 #include <linux/init.h>
38 #include <linux/delay.h>
39 #include <linux/of_device.h>
40
41 #include <asm/io.h>
42 #include <asm/irq.h>
43 #include <asm/prom.h>
44 #include <asm/setup.h>
45
46 #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
47 #define SUPPORT_SYSRQ
48 #endif
49
50 #include <linux/serial_core.h>
51 #include <linux/sunserialcore.h>
52
53 /* We are on a NS PC87303 clocked with 24.0 MHz, which results
54 * in a UART clock of 1.8462 MHz.
55 */
56 #define SU_BASE_BAUD (1846200 / 16)
57
58 enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
59 static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
60
61 struct serial_uart_config {
62 char *name;
63 int dfl_xmit_fifo_size;
64 int flags;
65 };
66
67 /*
68 * Here we define the default xmit fifo size used for each type of UART.
69 */
70 static const struct serial_uart_config uart_config[] = {
71 { "unknown", 1, 0 },
72 { "8250", 1, 0 },
73 { "16450", 1, 0 },
74 { "16550", 1, 0 },
75 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
76 { "Cirrus", 1, 0 },
77 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
78 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
79 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
80 { "Startech", 1, 0 },
81 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
82 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
83 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
84 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
85 };
86
87 struct uart_sunsu_port {
88 struct uart_port port;
89 unsigned char acr;
90 unsigned char ier;
91 unsigned short rev;
92 unsigned char lcr;
93 unsigned int lsr_break_flag;
94 unsigned int cflag;
95
96 /* Probing information. */
97 enum su_type su_type;
98 unsigned int type_probed; /* XXX Stupid */
99 unsigned long reg_size;
100
101 #ifdef CONFIG_SERIO
102 struct serio serio;
103 int serio_open;
104 #endif
105 };
106
107 static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
108 {
109 offset <<= up->port.regshift;
110
111 switch (up->port.iotype) {
112 case UPIO_HUB6:
113 outb(up->port.hub6 - 1 + offset, up->port.iobase);
114 return inb(up->port.iobase + 1);
115
116 case UPIO_MEM:
117 return readb(up->port.membase + offset);
118
119 default:
120 return inb(up->port.iobase + offset);
121 }
122 }
123
124 static void serial_out(struct uart_sunsu_port *up, int offset, int value)
125 {
126 #ifndef CONFIG_SPARC64
127 /*
128 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
129 * connected with a gate then go to SlavIO. When IRQ4 goes tristated
130 * gate outputs a logical one. Since we use level triggered interrupts
131 * we have lockup and watchdog reset. We cannot mask IRQ because
132 * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
133 * This problem is similar to what Alpha people suffer, see serial.c.
134 */
135 if (offset == UART_MCR)
136 value |= UART_MCR_OUT2;
137 #endif
138 offset <<= up->port.regshift;
139
140 switch (up->port.iotype) {
141 case UPIO_HUB6:
142 outb(up->port.hub6 - 1 + offset, up->port.iobase);
143 outb(value, up->port.iobase + 1);
144 break;
145
146 case UPIO_MEM:
147 writeb(value, up->port.membase + offset);
148 break;
149
150 default:
151 outb(value, up->port.iobase + offset);
152 }
153 }
154
155 /*
156 * We used to support using pause I/O for certain machines. We
157 * haven't supported this for a while, but just in case it's badly
158 * needed for certain old 386 machines, I've left these #define's
159 * in....
160 */
161 #define serial_inp(up, offset) serial_in(up, offset)
162 #define serial_outp(up, offset, value) serial_out(up, offset, value)
163
164
165 /*
166 * For the 16C950
167 */
168 static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
169 {
170 serial_out(up, UART_SCR, offset);
171 serial_out(up, UART_ICR, value);
172 }
173
174 #if 0 /* Unused currently */
175 static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
176 {
177 unsigned int value;
178
179 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
180 serial_out(up, UART_SCR, offset);
181 value = serial_in(up, UART_ICR);
182 serial_icr_write(up, UART_ACR, up->acr);
183
184 return value;
185 }
186 #endif
187
188 #ifdef CONFIG_SERIAL_8250_RSA
189 /*
190 * Attempts to turn on the RSA FIFO. Returns zero on failure.
191 * We set the port uart clock rate if we succeed.
192 */
193 static int __enable_rsa(struct uart_sunsu_port *up)
194 {
195 unsigned char mode;
196 int result;
197
198 mode = serial_inp(up, UART_RSA_MSR);
199 result = mode & UART_RSA_MSR_FIFO;
200
201 if (!result) {
202 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
203 mode = serial_inp(up, UART_RSA_MSR);
204 result = mode & UART_RSA_MSR_FIFO;
205 }
206
207 if (result)
208 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
209
210 return result;
211 }
212
213 static void enable_rsa(struct uart_sunsu_port *up)
214 {
215 if (up->port.type == PORT_RSA) {
216 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
217 spin_lock_irq(&up->port.lock);
218 __enable_rsa(up);
219 spin_unlock_irq(&up->port.lock);
220 }
221 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
222 serial_outp(up, UART_RSA_FRR, 0);
223 }
224 }
225
226 /*
227 * Attempts to turn off the RSA FIFO. Returns zero on failure.
228 * It is unknown why interrupts were disabled in here. However,
229 * the caller is expected to preserve this behaviour by grabbing
230 * the spinlock before calling this function.
231 */
232 static void disable_rsa(struct uart_sunsu_port *up)
233 {
234 unsigned char mode;
235 int result;
236
237 if (up->port.type == PORT_RSA &&
238 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
239 spin_lock_irq(&up->port.lock);
240
241 mode = serial_inp(up, UART_RSA_MSR);
242 result = !(mode & UART_RSA_MSR_FIFO);
243
244 if (!result) {
245 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
246 mode = serial_inp(up, UART_RSA_MSR);
247 result = !(mode & UART_RSA_MSR_FIFO);
248 }
249
250 if (result)
251 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
252 spin_unlock_irq(&up->port.lock);
253 }
254 }
255 #endif /* CONFIG_SERIAL_8250_RSA */
256
257 static inline void __stop_tx(struct uart_sunsu_port *p)
258 {
259 if (p->ier & UART_IER_THRI) {
260 p->ier &= ~UART_IER_THRI;
261 serial_out(p, UART_IER, p->ier);
262 }
263 }
264
265 static void sunsu_stop_tx(struct uart_port *port)
266 {
267 struct uart_sunsu_port *up =
268 container_of(port, struct uart_sunsu_port, port);
269
270 __stop_tx(up);
271
272 /*
273 * We really want to stop the transmitter from sending.
274 */
275 if (up->port.type == PORT_16C950) {
276 up->acr |= UART_ACR_TXDIS;
277 serial_icr_write(up, UART_ACR, up->acr);
278 }
279 }
280
281 static void sunsu_start_tx(struct uart_port *port)
282 {
283 struct uart_sunsu_port *up =
284 container_of(port, struct uart_sunsu_port, port);
285
286 if (!(up->ier & UART_IER_THRI)) {
287 up->ier |= UART_IER_THRI;
288 serial_out(up, UART_IER, up->ier);
289 }
290
291 /*
292 * Re-enable the transmitter if we disabled it.
293 */
294 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
295 up->acr &= ~UART_ACR_TXDIS;
296 serial_icr_write(up, UART_ACR, up->acr);
297 }
298 }
299
300 static void sunsu_stop_rx(struct uart_port *port)
301 {
302 struct uart_sunsu_port *up =
303 container_of(port, struct uart_sunsu_port, port);
304
305 up->ier &= ~UART_IER_RLSI;
306 up->port.read_status_mask &= ~UART_LSR_DR;
307 serial_out(up, UART_IER, up->ier);
308 }
309
310 static void sunsu_enable_ms(struct uart_port *port)
311 {
312 struct uart_sunsu_port *up =
313 container_of(port, struct uart_sunsu_port, port);
314 unsigned long flags;
315
316 spin_lock_irqsave(&up->port.lock, flags);
317 up->ier |= UART_IER_MSI;
318 serial_out(up, UART_IER, up->ier);
319 spin_unlock_irqrestore(&up->port.lock, flags);
320 }
321
322 static void
323 receive_chars(struct uart_sunsu_port *up, unsigned char *status)
324 {
325 struct tty_port *port = &up->port.state->port;
326 unsigned char ch, flag;
327 int max_count = 256;
328 int saw_console_brk = 0;
329
330 do {
331 ch = serial_inp(up, UART_RX);
332 flag = TTY_NORMAL;
333 up->port.icount.rx++;
334
335 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
336 UART_LSR_FE | UART_LSR_OE))) {
337 /*
338 * For statistics only
339 */
340 if (*status & UART_LSR_BI) {
341 *status &= ~(UART_LSR_FE | UART_LSR_PE);
342 up->port.icount.brk++;
343 if (up->port.cons != NULL &&
344 up->port.line == up->port.cons->index)
345 saw_console_brk = 1;
346 /*
347 * We do the SysRQ and SAK checking
348 * here because otherwise the break
349 * may get masked by ignore_status_mask
350 * or read_status_mask.
351 */
352 if (uart_handle_break(&up->port))
353 goto ignore_char;
354 } else if (*status & UART_LSR_PE)
355 up->port.icount.parity++;
356 else if (*status & UART_LSR_FE)
357 up->port.icount.frame++;
358 if (*status & UART_LSR_OE)
359 up->port.icount.overrun++;
360
361 /*
362 * Mask off conditions which should be ingored.
363 */
364 *status &= up->port.read_status_mask;
365
366 if (up->port.cons != NULL &&
367 up->port.line == up->port.cons->index) {
368 /* Recover the break flag from console xmit */
369 *status |= up->lsr_break_flag;
370 up->lsr_break_flag = 0;
371 }
372
373 if (*status & UART_LSR_BI) {
374 flag = TTY_BREAK;
375 } else if (*status & UART_LSR_PE)
376 flag = TTY_PARITY;
377 else if (*status & UART_LSR_FE)
378 flag = TTY_FRAME;
379 }
380 if (uart_handle_sysrq_char(&up->port, ch))
381 goto ignore_char;
382 if ((*status & up->port.ignore_status_mask) == 0)
383 tty_insert_flip_char(port, ch, flag);
384 if (*status & UART_LSR_OE)
385 /*
386 * Overrun is special, since it's reported
387 * immediately, and doesn't affect the current
388 * character.
389 */
390 tty_insert_flip_char(port, 0, TTY_OVERRUN);
391 ignore_char:
392 *status = serial_inp(up, UART_LSR);
393 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
394
395 if (saw_console_brk)
396 sun_do_break();
397 }
398
399 static void transmit_chars(struct uart_sunsu_port *up)
400 {
401 struct circ_buf *xmit = &up->port.state->xmit;
402 int count;
403
404 if (up->port.x_char) {
405 serial_outp(up, UART_TX, up->port.x_char);
406 up->port.icount.tx++;
407 up->port.x_char = 0;
408 return;
409 }
410 if (uart_tx_stopped(&up->port)) {
411 sunsu_stop_tx(&up->port);
412 return;
413 }
414 if (uart_circ_empty(xmit)) {
415 __stop_tx(up);
416 return;
417 }
418
419 count = up->port.fifosize;
420 do {
421 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
422 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
423 up->port.icount.tx++;
424 if (uart_circ_empty(xmit))
425 break;
426 } while (--count > 0);
427
428 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
429 uart_write_wakeup(&up->port);
430
431 if (uart_circ_empty(xmit))
432 __stop_tx(up);
433 }
434
435 static void check_modem_status(struct uart_sunsu_port *up)
436 {
437 int status;
438
439 status = serial_in(up, UART_MSR);
440
441 if ((status & UART_MSR_ANY_DELTA) == 0)
442 return;
443
444 if (status & UART_MSR_TERI)
445 up->port.icount.rng++;
446 if (status & UART_MSR_DDSR)
447 up->port.icount.dsr++;
448 if (status & UART_MSR_DDCD)
449 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
450 if (status & UART_MSR_DCTS)
451 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
452
453 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
454 }
455
456 static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
457 {
458 struct uart_sunsu_port *up = dev_id;
459 unsigned long flags;
460 unsigned char status;
461
462 spin_lock_irqsave(&up->port.lock, flags);
463
464 do {
465 status = serial_inp(up, UART_LSR);
466 if (status & UART_LSR_DR)
467 receive_chars(up, &status);
468 check_modem_status(up);
469 if (status & UART_LSR_THRE)
470 transmit_chars(up);
471
472 spin_unlock_irqrestore(&up->port.lock, flags);
473
474 tty_flip_buffer_push(&up->port.state->port);
475
476 spin_lock_irqsave(&up->port.lock, flags);
477
478 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
479
480 spin_unlock_irqrestore(&up->port.lock, flags);
481
482 return IRQ_HANDLED;
483 }
484
485 /* Separate interrupt handling path for keyboard/mouse ports. */
486
487 static void
488 sunsu_change_speed(struct uart_port *port, unsigned int cflag,
489 unsigned int iflag, unsigned int quot);
490
491 static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
492 {
493 unsigned int cur_cflag = up->cflag;
494 int quot, new_baud;
495
496 up->cflag &= ~CBAUD;
497 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
498
499 quot = up->port.uartclk / (16 * new_baud);
500
501 sunsu_change_speed(&up->port, up->cflag, 0, quot);
502 }
503
504 static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
505 {
506 do {
507 unsigned char ch = serial_inp(up, UART_RX);
508
509 /* Stop-A is handled by drivers/char/keyboard.c now. */
510 if (up->su_type == SU_PORT_KBD) {
511 #ifdef CONFIG_SERIO
512 serio_interrupt(&up->serio, ch, 0);
513 #endif
514 } else if (up->su_type == SU_PORT_MS) {
515 int ret = suncore_mouse_baud_detection(ch, is_break);
516
517 switch (ret) {
518 case 2:
519 sunsu_change_mouse_baud(up);
520 /* fallthru */
521 case 1:
522 break;
523
524 case 0:
525 #ifdef CONFIG_SERIO
526 serio_interrupt(&up->serio, ch, 0);
527 #endif
528 break;
529 }
530 }
531 } while (serial_in(up, UART_LSR) & UART_LSR_DR);
532 }
533
534 static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id)
535 {
536 struct uart_sunsu_port *up = dev_id;
537
538 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
539 unsigned char status = serial_inp(up, UART_LSR);
540
541 if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
542 receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0);
543 }
544
545 return IRQ_HANDLED;
546 }
547
548 static unsigned int sunsu_tx_empty(struct uart_port *port)
549 {
550 struct uart_sunsu_port *up =
551 container_of(port, struct uart_sunsu_port, port);
552 unsigned long flags;
553 unsigned int ret;
554
555 spin_lock_irqsave(&up->port.lock, flags);
556 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
557 spin_unlock_irqrestore(&up->port.lock, flags);
558
559 return ret;
560 }
561
562 static unsigned int sunsu_get_mctrl(struct uart_port *port)
563 {
564 struct uart_sunsu_port *up =
565 container_of(port, struct uart_sunsu_port, port);
566 unsigned char status;
567 unsigned int ret;
568
569 status = serial_in(up, UART_MSR);
570
571 ret = 0;
572 if (status & UART_MSR_DCD)
573 ret |= TIOCM_CAR;
574 if (status & UART_MSR_RI)
575 ret |= TIOCM_RNG;
576 if (status & UART_MSR_DSR)
577 ret |= TIOCM_DSR;
578 if (status & UART_MSR_CTS)
579 ret |= TIOCM_CTS;
580 return ret;
581 }
582
583 static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
584 {
585 struct uart_sunsu_port *up =
586 container_of(port, struct uart_sunsu_port, port);
587 unsigned char mcr = 0;
588
589 if (mctrl & TIOCM_RTS)
590 mcr |= UART_MCR_RTS;
591 if (mctrl & TIOCM_DTR)
592 mcr |= UART_MCR_DTR;
593 if (mctrl & TIOCM_OUT1)
594 mcr |= UART_MCR_OUT1;
595 if (mctrl & TIOCM_OUT2)
596 mcr |= UART_MCR_OUT2;
597 if (mctrl & TIOCM_LOOP)
598 mcr |= UART_MCR_LOOP;
599
600 serial_out(up, UART_MCR, mcr);
601 }
602
603 static void sunsu_break_ctl(struct uart_port *port, int break_state)
604 {
605 struct uart_sunsu_port *up =
606 container_of(port, struct uart_sunsu_port, port);
607 unsigned long flags;
608
609 spin_lock_irqsave(&up->port.lock, flags);
610 if (break_state == -1)
611 up->lcr |= UART_LCR_SBC;
612 else
613 up->lcr &= ~UART_LCR_SBC;
614 serial_out(up, UART_LCR, up->lcr);
615 spin_unlock_irqrestore(&up->port.lock, flags);
616 }
617
618 static int sunsu_startup(struct uart_port *port)
619 {
620 struct uart_sunsu_port *up =
621 container_of(port, struct uart_sunsu_port, port);
622 unsigned long flags;
623 int retval;
624
625 if (up->port.type == PORT_16C950) {
626 /* Wake up and initialize UART */
627 up->acr = 0;
628 serial_outp(up, UART_LCR, 0xBF);
629 serial_outp(up, UART_EFR, UART_EFR_ECB);
630 serial_outp(up, UART_IER, 0);
631 serial_outp(up, UART_LCR, 0);
632 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
633 serial_outp(up, UART_LCR, 0xBF);
634 serial_outp(up, UART_EFR, UART_EFR_ECB);
635 serial_outp(up, UART_LCR, 0);
636 }
637
638 #ifdef CONFIG_SERIAL_8250_RSA
639 /*
640 * If this is an RSA port, see if we can kick it up to the
641 * higher speed clock.
642 */
643 enable_rsa(up);
644 #endif
645
646 /*
647 * Clear the FIFO buffers and disable them.
648 * (they will be reenabled in set_termios())
649 */
650 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
651 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
652 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
653 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
654 serial_outp(up, UART_FCR, 0);
655 }
656
657 /*
658 * Clear the interrupt registers.
659 */
660 (void) serial_inp(up, UART_LSR);
661 (void) serial_inp(up, UART_RX);
662 (void) serial_inp(up, UART_IIR);
663 (void) serial_inp(up, UART_MSR);
664
665 /*
666 * At this point, there's no way the LSR could still be 0xff;
667 * if it is, then bail out, because there's likely no UART
668 * here.
669 */
670 if (!(up->port.flags & UPF_BUGGY_UART) &&
671 (serial_inp(up, UART_LSR) == 0xff)) {
672 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
673 return -ENODEV;
674 }
675
676 if (up->su_type != SU_PORT_PORT) {
677 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
678 IRQF_SHARED, su_typev[up->su_type], up);
679 } else {
680 retval = request_irq(up->port.irq, sunsu_serial_interrupt,
681 IRQF_SHARED, su_typev[up->su_type], up);
682 }
683 if (retval) {
684 printk("su: Cannot register IRQ %d\n", up->port.irq);
685 return retval;
686 }
687
688 /*
689 * Now, initialize the UART
690 */
691 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
692
693 spin_lock_irqsave(&up->port.lock, flags);
694
695 up->port.mctrl |= TIOCM_OUT2;
696
697 sunsu_set_mctrl(&up->port, up->port.mctrl);
698 spin_unlock_irqrestore(&up->port.lock, flags);
699
700 /*
701 * Finally, enable interrupts. Note: Modem status interrupts
702 * are set via set_termios(), which will be occurring imminently
703 * anyway, so we don't enable them here.
704 */
705 up->ier = UART_IER_RLSI | UART_IER_RDI;
706 serial_outp(up, UART_IER, up->ier);
707
708 if (up->port.flags & UPF_FOURPORT) {
709 unsigned int icp;
710 /*
711 * Enable interrupts on the AST Fourport board
712 */
713 icp = (up->port.iobase & 0xfe0) | 0x01f;
714 outb_p(0x80, icp);
715 (void) inb_p(icp);
716 }
717
718 /*
719 * And clear the interrupt registers again for luck.
720 */
721 (void) serial_inp(up, UART_LSR);
722 (void) serial_inp(up, UART_RX);
723 (void) serial_inp(up, UART_IIR);
724 (void) serial_inp(up, UART_MSR);
725
726 return 0;
727 }
728
729 static void sunsu_shutdown(struct uart_port *port)
730 {
731 struct uart_sunsu_port *up =
732 container_of(port, struct uart_sunsu_port, port);
733 unsigned long flags;
734
735 /*
736 * Disable interrupts from this port
737 */
738 up->ier = 0;
739 serial_outp(up, UART_IER, 0);
740
741 spin_lock_irqsave(&up->port.lock, flags);
742 if (up->port.flags & UPF_FOURPORT) {
743 /* reset interrupts on the AST Fourport board */
744 inb((up->port.iobase & 0xfe0) | 0x1f);
745 up->port.mctrl |= TIOCM_OUT1;
746 } else
747 up->port.mctrl &= ~TIOCM_OUT2;
748
749 sunsu_set_mctrl(&up->port, up->port.mctrl);
750 spin_unlock_irqrestore(&up->port.lock, flags);
751
752 /*
753 * Disable break condition and FIFOs
754 */
755 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
756 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
757 UART_FCR_CLEAR_RCVR |
758 UART_FCR_CLEAR_XMIT);
759 serial_outp(up, UART_FCR, 0);
760
761 #ifdef CONFIG_SERIAL_8250_RSA
762 /*
763 * Reset the RSA board back to 115kbps compat mode.
764 */
765 disable_rsa(up);
766 #endif
767
768 /*
769 * Read data port to reset things.
770 */
771 (void) serial_in(up, UART_RX);
772
773 free_irq(up->port.irq, up);
774 }
775
776 static void
777 sunsu_change_speed(struct uart_port *port, unsigned int cflag,
778 unsigned int iflag, unsigned int quot)
779 {
780 struct uart_sunsu_port *up =
781 container_of(port, struct uart_sunsu_port, port);
782 unsigned char cval, fcr = 0;
783 unsigned long flags;
784
785 switch (cflag & CSIZE) {
786 case CS5:
787 cval = 0x00;
788 break;
789 case CS6:
790 cval = 0x01;
791 break;
792 case CS7:
793 cval = 0x02;
794 break;
795 default:
796 case CS8:
797 cval = 0x03;
798 break;
799 }
800
801 if (cflag & CSTOPB)
802 cval |= 0x04;
803 if (cflag & PARENB)
804 cval |= UART_LCR_PARITY;
805 if (!(cflag & PARODD))
806 cval |= UART_LCR_EPAR;
807 #ifdef CMSPAR
808 if (cflag & CMSPAR)
809 cval |= UART_LCR_SPAR;
810 #endif
811
812 /*
813 * Work around a bug in the Oxford Semiconductor 952 rev B
814 * chip which causes it to seriously miscalculate baud rates
815 * when DLL is 0.
816 */
817 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
818 up->rev == 0x5201)
819 quot ++;
820
821 if (uart_config[up->port.type].flags & UART_USE_FIFO) {
822 if ((up->port.uartclk / quot) < (2400 * 16))
823 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
824 #ifdef CONFIG_SERIAL_8250_RSA
825 else if (up->port.type == PORT_RSA)
826 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
827 #endif
828 else
829 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
830 }
831 if (up->port.type == PORT_16750)
832 fcr |= UART_FCR7_64BYTE;
833
834 /*
835 * Ok, we're now changing the port state. Do it with
836 * interrupts disabled.
837 */
838 spin_lock_irqsave(&up->port.lock, flags);
839
840 /*
841 * Update the per-port timeout.
842 */
843 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
844
845 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
846 if (iflag & INPCK)
847 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
848 if (iflag & (IGNBRK | BRKINT | PARMRK))
849 up->port.read_status_mask |= UART_LSR_BI;
850
851 /*
852 * Characteres to ignore
853 */
854 up->port.ignore_status_mask = 0;
855 if (iflag & IGNPAR)
856 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
857 if (iflag & IGNBRK) {
858 up->port.ignore_status_mask |= UART_LSR_BI;
859 /*
860 * If we're ignoring parity and break indicators,
861 * ignore overruns too (for real raw support).
862 */
863 if (iflag & IGNPAR)
864 up->port.ignore_status_mask |= UART_LSR_OE;
865 }
866
867 /*
868 * ignore all characters if CREAD is not set
869 */
870 if ((cflag & CREAD) == 0)
871 up->port.ignore_status_mask |= UART_LSR_DR;
872
873 /*
874 * CTS flow control flag and modem status interrupts
875 */
876 up->ier &= ~UART_IER_MSI;
877 if (UART_ENABLE_MS(&up->port, cflag))
878 up->ier |= UART_IER_MSI;
879
880 serial_out(up, UART_IER, up->ier);
881
882 if (uart_config[up->port.type].flags & UART_STARTECH) {
883 serial_outp(up, UART_LCR, 0xBF);
884 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
885 }
886 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
887 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
888 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
889 if (up->port.type == PORT_16750)
890 serial_outp(up, UART_FCR, fcr); /* set fcr */
891 serial_outp(up, UART_LCR, cval); /* reset DLAB */
892 up->lcr = cval; /* Save LCR */
893 if (up->port.type != PORT_16750) {
894 if (fcr & UART_FCR_ENABLE_FIFO) {
895 /* emulated UARTs (Lucent Venus 167x) need two steps */
896 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
897 }
898 serial_outp(up, UART_FCR, fcr); /* set fcr */
899 }
900
901 up->cflag = cflag;
902
903 spin_unlock_irqrestore(&up->port.lock, flags);
904 }
905
906 static void
907 sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
908 struct ktermios *old)
909 {
910 unsigned int baud, quot;
911
912 /*
913 * Ask the core to calculate the divisor for us.
914 */
915 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
916 quot = uart_get_divisor(port, baud);
917
918 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
919 }
920
921 static void sunsu_release_port(struct uart_port *port)
922 {
923 }
924
925 static int sunsu_request_port(struct uart_port *port)
926 {
927 return 0;
928 }
929
930 static void sunsu_config_port(struct uart_port *port, int flags)
931 {
932 struct uart_sunsu_port *up =
933 container_of(port, struct uart_sunsu_port, port);
934
935 if (flags & UART_CONFIG_TYPE) {
936 /*
937 * We are supposed to call autoconfig here, but this requires
938 * splitting all the OBP probing crap from the UART probing.
939 * We'll do it when we kill sunsu.c altogether.
940 */
941 port->type = up->type_probed; /* XXX */
942 }
943 }
944
945 static int
946 sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
947 {
948 return -EINVAL;
949 }
950
951 static const char *
952 sunsu_type(struct uart_port *port)
953 {
954 int type = port->type;
955
956 if (type >= ARRAY_SIZE(uart_config))
957 type = 0;
958 return uart_config[type].name;
959 }
960
961 static struct uart_ops sunsu_pops = {
962 .tx_empty = sunsu_tx_empty,
963 .set_mctrl = sunsu_set_mctrl,
964 .get_mctrl = sunsu_get_mctrl,
965 .stop_tx = sunsu_stop_tx,
966 .start_tx = sunsu_start_tx,
967 .stop_rx = sunsu_stop_rx,
968 .enable_ms = sunsu_enable_ms,
969 .break_ctl = sunsu_break_ctl,
970 .startup = sunsu_startup,
971 .shutdown = sunsu_shutdown,
972 .set_termios = sunsu_set_termios,
973 .type = sunsu_type,
974 .release_port = sunsu_release_port,
975 .request_port = sunsu_request_port,
976 .config_port = sunsu_config_port,
977 .verify_port = sunsu_verify_port,
978 };
979
980 #define UART_NR 4
981
982 static struct uart_sunsu_port sunsu_ports[UART_NR];
983 static int nr_inst; /* Number of already registered ports */
984
985 #ifdef CONFIG_SERIO
986
987 static DEFINE_SPINLOCK(sunsu_serio_lock);
988
989 static int sunsu_serio_write(struct serio *serio, unsigned char ch)
990 {
991 struct uart_sunsu_port *up = serio->port_data;
992 unsigned long flags;
993 int lsr;
994
995 spin_lock_irqsave(&sunsu_serio_lock, flags);
996
997 do {
998 lsr = serial_in(up, UART_LSR);
999 } while (!(lsr & UART_LSR_THRE));
1000
1001 /* Send the character out. */
1002 serial_out(up, UART_TX, ch);
1003
1004 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1005
1006 return 0;
1007 }
1008
1009 static int sunsu_serio_open(struct serio *serio)
1010 {
1011 struct uart_sunsu_port *up = serio->port_data;
1012 unsigned long flags;
1013 int ret;
1014
1015 spin_lock_irqsave(&sunsu_serio_lock, flags);
1016 if (!up->serio_open) {
1017 up->serio_open = 1;
1018 ret = 0;
1019 } else
1020 ret = -EBUSY;
1021 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1022
1023 return ret;
1024 }
1025
1026 static void sunsu_serio_close(struct serio *serio)
1027 {
1028 struct uart_sunsu_port *up = serio->port_data;
1029 unsigned long flags;
1030
1031 spin_lock_irqsave(&sunsu_serio_lock, flags);
1032 up->serio_open = 0;
1033 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1034 }
1035
1036 #endif /* CONFIG_SERIO */
1037
1038 static void sunsu_autoconfig(struct uart_sunsu_port *up)
1039 {
1040 unsigned char status1, status2, scratch, scratch2, scratch3;
1041 unsigned char save_lcr, save_mcr;
1042 unsigned long flags;
1043
1044 if (up->su_type == SU_PORT_NONE)
1045 return;
1046
1047 up->type_probed = PORT_UNKNOWN;
1048 up->port.iotype = UPIO_MEM;
1049
1050 spin_lock_irqsave(&up->port.lock, flags);
1051
1052 if (!(up->port.flags & UPF_BUGGY_UART)) {
1053 /*
1054 * Do a simple existence test first; if we fail this, there's
1055 * no point trying anything else.
1056 *
1057 * 0x80 is used as a nonsense port to prevent against false
1058 * positives due to ISA bus float. The assumption is that
1059 * 0x80 is a non-existent port; which should be safe since
1060 * include/asm/io.h also makes this assumption.
1061 */
1062 scratch = serial_inp(up, UART_IER);
1063 serial_outp(up, UART_IER, 0);
1064 #ifdef __i386__
1065 outb(0xff, 0x080);
1066 #endif
1067 scratch2 = serial_inp(up, UART_IER);
1068 serial_outp(up, UART_IER, 0x0f);
1069 #ifdef __i386__
1070 outb(0, 0x080);
1071 #endif
1072 scratch3 = serial_inp(up, UART_IER);
1073 serial_outp(up, UART_IER, scratch);
1074 if (scratch2 != 0 || scratch3 != 0x0F)
1075 goto out; /* We failed; there's nothing here */
1076 }
1077
1078 save_mcr = serial_in(up, UART_MCR);
1079 save_lcr = serial_in(up, UART_LCR);
1080
1081 /*
1082 * Check to see if a UART is really there. Certain broken
1083 * internal modems based on the Rockwell chipset fail this
1084 * test, because they apparently don't implement the loopback
1085 * test mode. So this test is skipped on the COM 1 through
1086 * COM 4 ports. This *should* be safe, since no board
1087 * manufacturer would be stupid enough to design a board
1088 * that conflicts with COM 1-4 --- we hope!
1089 */
1090 if (!(up->port.flags & UPF_SKIP_TEST)) {
1091 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1092 status1 = serial_inp(up, UART_MSR) & 0xF0;
1093 serial_outp(up, UART_MCR, save_mcr);
1094 if (status1 != 0x90)
1095 goto out; /* We failed loopback test */
1096 }
1097 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1098 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1099 serial_outp(up, UART_LCR, 0);
1100 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1101 scratch = serial_in(up, UART_IIR) >> 6;
1102 switch (scratch) {
1103 case 0:
1104 up->port.type = PORT_16450;
1105 break;
1106 case 1:
1107 up->port.type = PORT_UNKNOWN;
1108 break;
1109 case 2:
1110 up->port.type = PORT_16550;
1111 break;
1112 case 3:
1113 up->port.type = PORT_16550A;
1114 break;
1115 }
1116 if (up->port.type == PORT_16550A) {
1117 /* Check for Startech UART's */
1118 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1119 if (serial_in(up, UART_EFR) == 0) {
1120 up->port.type = PORT_16650;
1121 } else {
1122 serial_outp(up, UART_LCR, 0xBF);
1123 if (serial_in(up, UART_EFR) == 0)
1124 up->port.type = PORT_16650V2;
1125 }
1126 }
1127 if (up->port.type == PORT_16550A) {
1128 /* Check for TI 16750 */
1129 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1130 serial_outp(up, UART_FCR,
1131 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1132 scratch = serial_in(up, UART_IIR) >> 5;
1133 if (scratch == 7) {
1134 /*
1135 * If this is a 16750, and not a cheap UART
1136 * clone, then it should only go into 64 byte
1137 * mode if the UART_FCR7_64BYTE bit was set
1138 * while UART_LCR_DLAB was latched.
1139 */
1140 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1141 serial_outp(up, UART_LCR, 0);
1142 serial_outp(up, UART_FCR,
1143 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1144 scratch = serial_in(up, UART_IIR) >> 5;
1145 if (scratch == 6)
1146 up->port.type = PORT_16750;
1147 }
1148 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1149 }
1150 serial_outp(up, UART_LCR, save_lcr);
1151 if (up->port.type == PORT_16450) {
1152 scratch = serial_in(up, UART_SCR);
1153 serial_outp(up, UART_SCR, 0xa5);
1154 status1 = serial_in(up, UART_SCR);
1155 serial_outp(up, UART_SCR, 0x5a);
1156 status2 = serial_in(up, UART_SCR);
1157 serial_outp(up, UART_SCR, scratch);
1158
1159 if ((status1 != 0xa5) || (status2 != 0x5a))
1160 up->port.type = PORT_8250;
1161 }
1162
1163 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
1164
1165 if (up->port.type == PORT_UNKNOWN)
1166 goto out;
1167 up->type_probed = up->port.type; /* XXX */
1168
1169 /*
1170 * Reset the UART.
1171 */
1172 #ifdef CONFIG_SERIAL_8250_RSA
1173 if (up->port.type == PORT_RSA)
1174 serial_outp(up, UART_RSA_FRR, 0);
1175 #endif
1176 serial_outp(up, UART_MCR, save_mcr);
1177 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1178 UART_FCR_CLEAR_RCVR |
1179 UART_FCR_CLEAR_XMIT));
1180 serial_outp(up, UART_FCR, 0);
1181 (void)serial_in(up, UART_RX);
1182 serial_outp(up, UART_IER, 0);
1183
1184 out:
1185 spin_unlock_irqrestore(&up->port.lock, flags);
1186 }
1187
1188 static struct uart_driver sunsu_reg = {
1189 .owner = THIS_MODULE,
1190 .driver_name = "sunsu",
1191 .dev_name = "ttyS",
1192 .major = TTY_MAJOR,
1193 };
1194
1195 static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
1196 {
1197 int quot, baud;
1198 #ifdef CONFIG_SERIO
1199 struct serio *serio;
1200 #endif
1201
1202 if (up->su_type == SU_PORT_KBD) {
1203 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1204 baud = 1200;
1205 } else {
1206 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1207 baud = 4800;
1208 }
1209 quot = up->port.uartclk / (16 * baud);
1210
1211 sunsu_autoconfig(up);
1212 if (up->port.type == PORT_UNKNOWN)
1213 return -ENODEV;
1214
1215 printk("%s: %s port at %llx, irq %u\n",
1216 up->port.dev->of_node->full_name,
1217 (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
1218 (unsigned long long) up->port.mapbase,
1219 up->port.irq);
1220
1221 #ifdef CONFIG_SERIO
1222 serio = &up->serio;
1223 serio->port_data = up;
1224
1225 serio->id.type = SERIO_RS232;
1226 if (up->su_type == SU_PORT_KBD) {
1227 serio->id.proto = SERIO_SUNKBD;
1228 strlcpy(serio->name, "sukbd", sizeof(serio->name));
1229 } else {
1230 serio->id.proto = SERIO_SUN;
1231 serio->id.extra = 1;
1232 strlcpy(serio->name, "sums", sizeof(serio->name));
1233 }
1234 strlcpy(serio->phys,
1235 (!(up->port.line & 1) ? "su/serio0" : "su/serio1"),
1236 sizeof(serio->phys));
1237
1238 serio->write = sunsu_serio_write;
1239 serio->open = sunsu_serio_open;
1240 serio->close = sunsu_serio_close;
1241 serio->dev.parent = up->port.dev;
1242
1243 serio_register_port(serio);
1244 #endif
1245
1246 sunsu_change_speed(&up->port, up->cflag, 0, quot);
1247
1248 sunsu_startup(&up->port);
1249 return 0;
1250 }
1251
1252 /*
1253 * ------------------------------------------------------------
1254 * Serial console driver
1255 * ------------------------------------------------------------
1256 */
1257
1258 #ifdef CONFIG_SERIAL_SUNSU_CONSOLE
1259
1260 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
1261
1262 /*
1263 * Wait for transmitter & holding register to empty
1264 */
1265 static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
1266 {
1267 unsigned int status, tmout = 10000;
1268
1269 /* Wait up to 10ms for the character(s) to be sent. */
1270 do {
1271 status = serial_in(up, UART_LSR);
1272
1273 if (status & UART_LSR_BI)
1274 up->lsr_break_flag = UART_LSR_BI;
1275
1276 if (--tmout == 0)
1277 break;
1278 udelay(1);
1279 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
1280
1281 /* Wait up to 1s for flow control if necessary */
1282 if (up->port.flags & UPF_CONS_FLOW) {
1283 tmout = 1000000;
1284 while (--tmout &&
1285 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
1286 udelay(1);
1287 }
1288 }
1289
1290 static void sunsu_console_putchar(struct uart_port *port, int ch)
1291 {
1292 struct uart_sunsu_port *up =
1293 container_of(port, struct uart_sunsu_port, port);
1294
1295 wait_for_xmitr(up);
1296 serial_out(up, UART_TX, ch);
1297 }
1298
1299 /*
1300 * Print a string to the serial port trying not to disturb
1301 * any possible real use of the port...
1302 */
1303 static void sunsu_console_write(struct console *co, const char *s,
1304 unsigned int count)
1305 {
1306 struct uart_sunsu_port *up = &sunsu_ports[co->index];
1307 unsigned long flags;
1308 unsigned int ier;
1309 int locked = 1;
1310
1311 if (up->port.sysrq || oops_in_progress)
1312 locked = spin_trylock_irqsave(&up->port.lock, flags);
1313 else
1314 spin_lock_irqsave(&up->port.lock, flags);
1315
1316 /*
1317 * First save the UER then disable the interrupts
1318 */
1319 ier = serial_in(up, UART_IER);
1320 serial_out(up, UART_IER, 0);
1321
1322 uart_console_write(&up->port, s, count, sunsu_console_putchar);
1323
1324 /*
1325 * Finally, wait for transmitter to become empty
1326 * and restore the IER
1327 */
1328 wait_for_xmitr(up);
1329 serial_out(up, UART_IER, ier);
1330
1331 if (locked)
1332 spin_unlock_irqrestore(&up->port.lock, flags);
1333 }
1334
1335 /*
1336 * Setup initial baud/bits/parity. We do two things here:
1337 * - construct a cflag setting for the first su_open()
1338 * - initialize the serial port
1339 * Return non-zero if we didn't find a serial port.
1340 */
1341 static int __init sunsu_console_setup(struct console *co, char *options)
1342 {
1343 static struct ktermios dummy;
1344 struct ktermios termios;
1345 struct uart_port *port;
1346
1347 printk("Console: ttyS%d (SU)\n",
1348 (sunsu_reg.minor - 64) + co->index);
1349
1350 if (co->index > nr_inst)
1351 return -ENODEV;
1352 port = &sunsu_ports[co->index].port;
1353
1354 /*
1355 * Temporary fix.
1356 */
1357 spin_lock_init(&port->lock);
1358
1359 /* Get firmware console settings. */
1360 sunserial_console_termios(co, port->dev->of_node);
1361
1362 memset(&termios, 0, sizeof(struct ktermios));
1363 termios.c_cflag = co->cflag;
1364 port->mctrl |= TIOCM_DTR;
1365 port->ops->set_termios(port, &termios, &dummy);
1366
1367 return 0;
1368 }
1369
1370 static struct console sunsu_console = {
1371 .name = "ttyS",
1372 .write = sunsu_console_write,
1373 .device = uart_console_device,
1374 .setup = sunsu_console_setup,
1375 .flags = CON_PRINTBUFFER,
1376 .index = -1,
1377 .data = &sunsu_reg,
1378 };
1379
1380 /*
1381 * Register console.
1382 */
1383
1384 static inline struct console *SUNSU_CONSOLE(void)
1385 {
1386 return &sunsu_console;
1387 }
1388 #else
1389 #define SUNSU_CONSOLE() (NULL)
1390 #define sunsu_serial_console_init() do { } while (0)
1391 #endif
1392
1393 static enum su_type su_get_type(struct device_node *dp)
1394 {
1395 struct device_node *ap = of_find_node_by_path("/aliases");
1396
1397 if (ap) {
1398 const char *keyb = of_get_property(ap, "keyboard", NULL);
1399 const char *ms = of_get_property(ap, "mouse", NULL);
1400
1401 if (keyb) {
1402 if (dp == of_find_node_by_path(keyb))
1403 return SU_PORT_KBD;
1404 }
1405 if (ms) {
1406 if (dp == of_find_node_by_path(ms))
1407 return SU_PORT_MS;
1408 }
1409 }
1410
1411 return SU_PORT_PORT;
1412 }
1413
1414 static int su_probe(struct platform_device *op)
1415 {
1416 struct device_node *dp = op->dev.of_node;
1417 struct uart_sunsu_port *up;
1418 struct resource *rp;
1419 enum su_type type;
1420 bool ignore_line;
1421 int err;
1422
1423 type = su_get_type(dp);
1424 if (type == SU_PORT_PORT) {
1425 if (nr_inst >= UART_NR)
1426 return -EINVAL;
1427 up = &sunsu_ports[nr_inst];
1428 } else {
1429 up = kzalloc(sizeof(*up), GFP_KERNEL);
1430 if (!up)
1431 return -ENOMEM;
1432 }
1433
1434 up->port.line = nr_inst;
1435
1436 spin_lock_init(&up->port.lock);
1437
1438 up->su_type = type;
1439
1440 rp = &op->resource[0];
1441 up->port.mapbase = rp->start;
1442 up->reg_size = resource_size(rp);
1443 up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
1444 if (!up->port.membase) {
1445 if (type != SU_PORT_PORT)
1446 kfree(up);
1447 return -ENOMEM;
1448 }
1449
1450 up->port.irq = op->archdata.irqs[0];
1451
1452 up->port.dev = &op->dev;
1453
1454 up->port.type = PORT_UNKNOWN;
1455 up->port.uartclk = (SU_BASE_BAUD * 16);
1456
1457 err = 0;
1458 if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
1459 err = sunsu_kbd_ms_init(up);
1460 if (err) {
1461 of_iounmap(&op->resource[0],
1462 up->port.membase, up->reg_size);
1463 kfree(up);
1464 return err;
1465 }
1466 platform_set_drvdata(op, up);
1467
1468 nr_inst++;
1469
1470 return 0;
1471 }
1472
1473 up->port.flags |= UPF_BOOT_AUTOCONF;
1474
1475 sunsu_autoconfig(up);
1476
1477 err = -ENODEV;
1478 if (up->port.type == PORT_UNKNOWN)
1479 goto out_unmap;
1480
1481 up->port.ops = &sunsu_pops;
1482
1483 ignore_line = false;
1484 if (!strcmp(dp->name, "rsc-console") ||
1485 !strcmp(dp->name, "lom-console"))
1486 ignore_line = true;
1487
1488 sunserial_console_match(SUNSU_CONSOLE(), dp,
1489 &sunsu_reg, up->port.line,
1490 ignore_line);
1491 err = uart_add_one_port(&sunsu_reg, &up->port);
1492 if (err)
1493 goto out_unmap;
1494
1495 platform_set_drvdata(op, up);
1496
1497 nr_inst++;
1498
1499 return 0;
1500
1501 out_unmap:
1502 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1503 return err;
1504 }
1505
1506 static int su_remove(struct platform_device *op)
1507 {
1508 struct uart_sunsu_port *up = platform_get_drvdata(op);
1509 bool kbdms = false;
1510
1511 if (up->su_type == SU_PORT_MS ||
1512 up->su_type == SU_PORT_KBD)
1513 kbdms = true;
1514
1515 if (kbdms) {
1516 #ifdef CONFIG_SERIO
1517 serio_unregister_port(&up->serio);
1518 #endif
1519 } else if (up->port.type != PORT_UNKNOWN)
1520 uart_remove_one_port(&sunsu_reg, &up->port);
1521
1522 if (up->port.membase)
1523 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1524
1525 if (kbdms)
1526 kfree(up);
1527
1528 return 0;
1529 }
1530
1531 static const struct of_device_id su_match[] = {
1532 {
1533 .name = "su",
1534 },
1535 {
1536 .name = "su_pnp",
1537 },
1538 {
1539 .name = "serial",
1540 .compatible = "su",
1541 },
1542 {
1543 .type = "serial",
1544 .compatible = "su",
1545 },
1546 {},
1547 };
1548 MODULE_DEVICE_TABLE(of, su_match);
1549
1550 static struct platform_driver su_driver = {
1551 .driver = {
1552 .name = "su",
1553 .of_match_table = su_match,
1554 },
1555 .probe = su_probe,
1556 .remove = su_remove,
1557 };
1558
1559 static int __init sunsu_init(void)
1560 {
1561 struct device_node *dp;
1562 int err;
1563 int num_uart = 0;
1564
1565 for_each_node_by_name(dp, "su") {
1566 if (su_get_type(dp) == SU_PORT_PORT)
1567 num_uart++;
1568 }
1569 for_each_node_by_name(dp, "su_pnp") {
1570 if (su_get_type(dp) == SU_PORT_PORT)
1571 num_uart++;
1572 }
1573 for_each_node_by_name(dp, "serial") {
1574 if (of_device_is_compatible(dp, "su")) {
1575 if (su_get_type(dp) == SU_PORT_PORT)
1576 num_uart++;
1577 }
1578 }
1579 for_each_node_by_type(dp, "serial") {
1580 if (of_device_is_compatible(dp, "su")) {
1581 if (su_get_type(dp) == SU_PORT_PORT)
1582 num_uart++;
1583 }
1584 }
1585
1586 if (num_uart) {
1587 err = sunserial_register_minors(&sunsu_reg, num_uart);
1588 if (err)
1589 return err;
1590 }
1591
1592 err = platform_driver_register(&su_driver);
1593 if (err && num_uart)
1594 sunserial_unregister_minors(&sunsu_reg, num_uart);
1595
1596 return err;
1597 }
1598
1599 static void __exit sunsu_exit(void)
1600 {
1601 platform_driver_unregister(&su_driver);
1602 if (sunsu_reg.nr)
1603 sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
1604 }
1605
1606 module_init(sunsu_init);
1607 module_exit(sunsu_exit);
1608
1609 MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller");
1610 MODULE_DESCRIPTION("Sun SU serial port driver");
1611 MODULE_VERSION("2.0");
1612 MODULE_LICENSE("GPL");
Linux with added FPC-III support