Linux 2.6.20.13
[linux/fpc-iii.git] / include / asm-arm / arch-s3c2410 / regs-gpio.h
blobeae91694edcdf61939eacbdd99225d440572e7bd
1 /* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
3 * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * S3C2410 GPIO register definitions
14 #ifndef __ASM_ARCH_REGS_GPIO_H
15 #define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
17 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
19 #define S3C2410_GPIO_BANKA (32*0)
20 #define S3C2410_GPIO_BANKB (32*1)
21 #define S3C2410_GPIO_BANKC (32*2)
22 #define S3C2410_GPIO_BANKD (32*3)
23 #define S3C2410_GPIO_BANKE (32*4)
24 #define S3C2410_GPIO_BANKF (32*5)
25 #define S3C2410_GPIO_BANKG (32*6)
26 #define S3C2410_GPIO_BANKH (32*7)
28 #ifdef CONFIG_CPU_S3C2400
29 #define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x)
30 #define S3C24XX_MISCCR S3C2400_MISCCR
31 #else
32 #define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x)
33 #define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
34 #endif /* CONFIG_CPU_S3C2400 */
37 /* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
39 #define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32)
40 #define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2))
41 #define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \
42 (2 * (S3C2400_BANKNUM(pin)-2)))
44 #define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \
45 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
46 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
49 #define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
50 #define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
52 /* general configuration options */
54 #define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
55 #define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */
56 #define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
57 #define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
58 #define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */
59 #define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
61 /* register address for the GPIO registers.
62 * S3C24XX_GPIOREG2 is for the second set of registers in the
63 * GPIO which move between s3c2410 and s3c2412 type systems */
65 #define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
66 #define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
69 /* configure GPIO ports A..G */
71 /* port A - S3C2410: 22bits, zero in bit X makes pin X output
72 * S3C2400: 18bits, zero in bit X makes pin X output
73 * 1 makes port special function, this is default
75 #define S3C2410_GPACON S3C2410_GPIOREG(0x00)
76 #define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
78 #define S3C2400_GPACON S3C2410_GPIOREG(0x00)
79 #define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
81 #define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
82 #define S3C2410_GPA0_OUT (0<<0)
83 #define S3C2410_GPA0_ADDR0 (1<<0)
85 #define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
86 #define S3C2410_GPA1_OUT (0<<1)
87 #define S3C2410_GPA1_ADDR16 (1<<1)
89 #define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
90 #define S3C2410_GPA2_OUT (0<<2)
91 #define S3C2410_GPA2_ADDR17 (1<<2)
93 #define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
94 #define S3C2410_GPA3_OUT (0<<3)
95 #define S3C2410_GPA3_ADDR18 (1<<3)
97 #define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
98 #define S3C2410_GPA4_OUT (0<<4)
99 #define S3C2410_GPA4_ADDR19 (1<<4)
101 #define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
102 #define S3C2410_GPA5_OUT (0<<5)
103 #define S3C2410_GPA5_ADDR20 (1<<5)
105 #define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
106 #define S3C2410_GPA6_OUT (0<<6)
107 #define S3C2410_GPA6_ADDR21 (1<<6)
109 #define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
110 #define S3C2410_GPA7_OUT (0<<7)
111 #define S3C2410_GPA7_ADDR22 (1<<7)
113 #define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
114 #define S3C2410_GPA8_OUT (0<<8)
115 #define S3C2410_GPA8_ADDR23 (1<<8)
117 #define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
118 #define S3C2410_GPA9_OUT (0<<9)
119 #define S3C2410_GPA9_ADDR24 (1<<9)
121 #define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
122 #define S3C2410_GPA10_OUT (0<<10)
123 #define S3C2410_GPA10_ADDR25 (1<<10)
124 #define S3C2400_GPA10_SCKE (1<<10)
126 #define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
127 #define S3C2410_GPA11_OUT (0<<11)
128 #define S3C2410_GPA11_ADDR26 (1<<11)
129 #define S3C2400_GPA11_nCAS0 (1<<11)
131 #define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
132 #define S3C2410_GPA12_OUT (0<<12)
133 #define S3C2410_GPA12_nGCS1 (1<<12)
134 #define S3C2400_GPA12_nCAS1 (1<<12)
136 #define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
137 #define S3C2410_GPA13_OUT (0<<13)
138 #define S3C2410_GPA13_nGCS2 (1<<13)
139 #define S3C2400_GPA13_nGCS1 (1<<13)
141 #define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
142 #define S3C2410_GPA14_OUT (0<<14)
143 #define S3C2410_GPA14_nGCS3 (1<<14)
144 #define S3C2400_GPA14_nGCS2 (1<<14)
146 #define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
147 #define S3C2410_GPA15_OUT (0<<15)
148 #define S3C2410_GPA15_nGCS4 (1<<15)
149 #define S3C2400_GPA15_nGCS3 (1<<15)
151 #define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
152 #define S3C2410_GPA16_OUT (0<<16)
153 #define S3C2410_GPA16_nGCS5 (1<<16)
154 #define S3C2400_GPA16_nGCS4 (1<<16)
156 #define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
157 #define S3C2410_GPA17_OUT (0<<17)
158 #define S3C2410_GPA17_CLE (1<<17)
159 #define S3C2400_GPA17_nGCS5 (1<<17)
161 #define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
162 #define S3C2410_GPA18_OUT (0<<18)
163 #define S3C2410_GPA18_ALE (1<<18)
165 #define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
166 #define S3C2410_GPA19_OUT (0<<19)
167 #define S3C2410_GPA19_nFWE (1<<19)
169 #define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
170 #define S3C2410_GPA20_OUT (0<<20)
171 #define S3C2410_GPA20_nFRE (1<<20)
173 #define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
174 #define S3C2410_GPA21_OUT (0<<21)
175 #define S3C2410_GPA21_nRSTOUT (1<<21)
177 #define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
178 #define S3C2410_GPA22_OUT (0<<22)
179 #define S3C2410_GPA22_nFCE (1<<22)
181 /* 0x08 and 0x0c are reserved on S3C2410 */
183 /* S3C2410:
184 * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
185 * 00 = input, 01 = output, 10=special function, 11=reserved
187 * S3C2400:
188 * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
189 * 00 = input, 01 = output, 10=data, 11=special function
191 * bit 0,1 = pin 0, 2,3= pin 1...
193 * CPBUP = pull up resistor control, 1=disabled, 0=enabled
196 #define S3C2410_GPBCON S3C2410_GPIOREG(0x10)
197 #define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
198 #define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
200 #define S3C2400_GPBCON S3C2410_GPIOREG(0x08)
201 #define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
202 #define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
204 /* no i/o pin in port b can have value 3! */
206 #define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
207 #define S3C2410_GPB0_INP (0x00 << 0)
208 #define S3C2410_GPB0_OUTP (0x01 << 0)
209 #define S3C2410_GPB0_TOUT0 (0x02 << 0)
210 #define S3C2400_GPB0_DATA16 (0x02 << 0)
212 #define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
213 #define S3C2410_GPB1_INP (0x00 << 2)
214 #define S3C2410_GPB1_OUTP (0x01 << 2)
215 #define S3C2410_GPB1_TOUT1 (0x02 << 2)
216 #define S3C2400_GPB1_DATA17 (0x02 << 2)
218 #define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
219 #define S3C2410_GPB2_INP (0x00 << 4)
220 #define S3C2410_GPB2_OUTP (0x01 << 4)
221 #define S3C2410_GPB2_TOUT2 (0x02 << 4)
222 #define S3C2400_GPB2_DATA18 (0x02 << 4)
223 #define S3C2400_GPB2_TCLK1 (0x03 << 4)
225 #define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
226 #define S3C2410_GPB3_INP (0x00 << 6)
227 #define S3C2410_GPB3_OUTP (0x01 << 6)
228 #define S3C2410_GPB3_TOUT3 (0x02 << 6)
229 #define S3C2400_GPB3_DATA19 (0x02 << 6)
230 #define S3C2400_GPB3_TXD1 (0x03 << 6)
232 #define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
233 #define S3C2410_GPB4_INP (0x00 << 8)
234 #define S3C2410_GPB4_OUTP (0x01 << 8)
235 #define S3C2410_GPB4_TCLK0 (0x02 << 8)
236 #define S3C2400_GPB4_DATA20 (0x02 << 8)
237 #define S3C2410_GPB4_MASK (0x03 << 8)
238 #define S3C2400_GPB4_RXD1 (0x03 << 8)
239 #define S3C2400_GPB4_MASK (0x03 << 8)
241 #define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
242 #define S3C2410_GPB5_INP (0x00 << 10)
243 #define S3C2410_GPB5_OUTP (0x01 << 10)
244 #define S3C2410_GPB5_nXBACK (0x02 << 10)
245 #define S3C2400_GPB5_DATA21 (0x02 << 10)
246 #define S3C2400_GPB5_nCTS1 (0x03 << 10)
248 #define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
249 #define S3C2410_GPB6_INP (0x00 << 12)
250 #define S3C2410_GPB6_OUTP (0x01 << 12)
251 #define S3C2410_GPB6_nXBREQ (0x02 << 12)
252 #define S3C2400_GPB6_DATA22 (0x02 << 12)
253 #define S3C2400_GPB6_nRTS1 (0x03 << 12)
255 #define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
256 #define S3C2410_GPB7_INP (0x00 << 14)
257 #define S3C2410_GPB7_OUTP (0x01 << 14)
258 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
259 #define S3C2400_GPB7_DATA23 (0x02 << 14)
261 #define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
262 #define S3C2410_GPB8_INP (0x00 << 16)
263 #define S3C2410_GPB8_OUTP (0x01 << 16)
264 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
265 #define S3C2400_GPB8_DATA24 (0x02 << 16)
267 #define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
268 #define S3C2410_GPB9_INP (0x00 << 18)
269 #define S3C2410_GPB9_OUTP (0x01 << 18)
270 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
271 #define S3C2400_GPB9_DATA25 (0x02 << 18)
272 #define S3C2400_GPB9_I2SSDI (0x03 << 18)
274 #define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
275 #define S3C2410_GPB10_INP (0x00 << 20)
276 #define S3C2410_GPB10_OUTP (0x01 << 20)
277 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
278 #define S3C2400_GPB10_DATA26 (0x02 << 20)
279 #define S3C2400_GPB10_nSS (0x03 << 20)
281 #define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
282 #define S3C2400_GPB11_INP (0x00 << 22)
283 #define S3C2400_GPB11_OUTP (0x01 << 22)
284 #define S3C2400_GPB11_DATA27 (0x02 << 22)
286 #define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
287 #define S3C2400_GPB12_INP (0x00 << 24)
288 #define S3C2400_GPB12_OUTP (0x01 << 24)
289 #define S3C2400_GPB12_DATA28 (0x02 << 24)
291 #define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
292 #define S3C2400_GPB13_INP (0x00 << 26)
293 #define S3C2400_GPB13_OUTP (0x01 << 26)
294 #define S3C2400_GPB13_DATA29 (0x02 << 26)
296 #define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
297 #define S3C2400_GPB14_INP (0x00 << 28)
298 #define S3C2400_GPB14_OUTP (0x01 << 28)
299 #define S3C2400_GPB14_DATA30 (0x02 << 28)
301 #define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
302 #define S3C2400_GPB15_INP (0x00 << 30)
303 #define S3C2400_GPB15_OUTP (0x01 << 30)
304 #define S3C2400_GPB15_DATA31 (0x02 << 30)
306 #define S3C2410_GPB_PUPDIS(x) (1<<(x))
308 /* Port C consits of 16 GPIO/Special function
310 * almost identical setup to port b, but the special functions are mostly
311 * to do with the video system's sync/etc.
314 #define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
315 #define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
316 #define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
318 #define S3C2400_GPCCON S3C2410_GPIOREG(0x14)
319 #define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
320 #define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
322 #define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
323 #define S3C2410_GPC0_INP (0x00 << 0)
324 #define S3C2410_GPC0_OUTP (0x01 << 0)
325 #define S3C2410_GPC0_LEND (0x02 << 0)
326 #define S3C2400_GPC0_VD0 (0x02 << 0)
328 #define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
329 #define S3C2410_GPC1_INP (0x00 << 2)
330 #define S3C2410_GPC1_OUTP (0x01 << 2)
331 #define S3C2410_GPC1_VCLK (0x02 << 2)
332 #define S3C2400_GPC1_VD1 (0x02 << 2)
334 #define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
335 #define S3C2410_GPC2_INP (0x00 << 4)
336 #define S3C2410_GPC2_OUTP (0x01 << 4)
337 #define S3C2410_GPC2_VLINE (0x02 << 4)
338 #define S3C2400_GPC2_VD2 (0x02 << 4)
340 #define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
341 #define S3C2410_GPC3_INP (0x00 << 6)
342 #define S3C2410_GPC3_OUTP (0x01 << 6)
343 #define S3C2410_GPC3_VFRAME (0x02 << 6)
344 #define S3C2400_GPC3_VD3 (0x02 << 6)
346 #define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
347 #define S3C2410_GPC4_INP (0x00 << 8)
348 #define S3C2410_GPC4_OUTP (0x01 << 8)
349 #define S3C2410_GPC4_VM (0x02 << 8)
350 #define S3C2400_GPC4_VD4 (0x02 << 8)
352 #define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
353 #define S3C2410_GPC5_INP (0x00 << 10)
354 #define S3C2410_GPC5_OUTP (0x01 << 10)
355 #define S3C2410_GPC5_LCDVF0 (0x02 << 10)
356 #define S3C2400_GPC5_VD5 (0x02 << 10)
358 #define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
359 #define S3C2410_GPC6_INP (0x00 << 12)
360 #define S3C2410_GPC6_OUTP (0x01 << 12)
361 #define S3C2410_GPC6_LCDVF1 (0x02 << 12)
362 #define S3C2400_GPC6_VD6 (0x02 << 12)
364 #define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
365 #define S3C2410_GPC7_INP (0x00 << 14)
366 #define S3C2410_GPC7_OUTP (0x01 << 14)
367 #define S3C2410_GPC7_LCDVF2 (0x02 << 14)
368 #define S3C2400_GPC7_VD7 (0x02 << 14)
370 #define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
371 #define S3C2410_GPC8_INP (0x00 << 16)
372 #define S3C2410_GPC8_OUTP (0x01 << 16)
373 #define S3C2410_GPC8_VD0 (0x02 << 16)
374 #define S3C2400_GPC8_VD8 (0x02 << 16)
376 #define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
377 #define S3C2410_GPC9_INP (0x00 << 18)
378 #define S3C2410_GPC9_OUTP (0x01 << 18)
379 #define S3C2410_GPC9_VD1 (0x02 << 18)
380 #define S3C2400_GPC9_VD9 (0x02 << 18)
382 #define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
383 #define S3C2410_GPC10_INP (0x00 << 20)
384 #define S3C2410_GPC10_OUTP (0x01 << 20)
385 #define S3C2410_GPC10_VD2 (0x02 << 20)
386 #define S3C2400_GPC10_VD10 (0x02 << 20)
388 #define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
389 #define S3C2410_GPC11_INP (0x00 << 22)
390 #define S3C2410_GPC11_OUTP (0x01 << 22)
391 #define S3C2410_GPC11_VD3 (0x02 << 22)
392 #define S3C2400_GPC11_VD11 (0x02 << 22)
394 #define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
395 #define S3C2410_GPC12_INP (0x00 << 24)
396 #define S3C2410_GPC12_OUTP (0x01 << 24)
397 #define S3C2410_GPC12_VD4 (0x02 << 24)
398 #define S3C2400_GPC12_VD12 (0x02 << 24)
400 #define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
401 #define S3C2410_GPC13_INP (0x00 << 26)
402 #define S3C2410_GPC13_OUTP (0x01 << 26)
403 #define S3C2410_GPC13_VD5 (0x02 << 26)
404 #define S3C2400_GPC13_VD13 (0x02 << 26)
406 #define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
407 #define S3C2410_GPC14_INP (0x00 << 28)
408 #define S3C2410_GPC14_OUTP (0x01 << 28)
409 #define S3C2410_GPC14_VD6 (0x02 << 28)
410 #define S3C2400_GPC14_VD14 (0x02 << 28)
412 #define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
413 #define S3C2410_GPC15_INP (0x00 << 30)
414 #define S3C2410_GPC15_OUTP (0x01 << 30)
415 #define S3C2410_GPC15_VD7 (0x02 << 30)
416 #define S3C2400_GPC15_VD15 (0x02 << 30)
418 #define S3C2410_GPC_PUPDIS(x) (1<<(x))
421 * S3C2410: Port D consists of 16 GPIO/Special function
423 * almost identical setup to port b, but the special functions are mostly
424 * to do with the video system's data.
426 * S3C2400: Port D consists of 11 GPIO/Special function
428 * almost identical setup to port c
431 #define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
432 #define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
433 #define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
435 #define S3C2400_GPDCON S3C2410_GPIOREG(0x20)
436 #define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
437 #define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
439 #define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
440 #define S3C2410_GPD0_INP (0x00 << 0)
441 #define S3C2410_GPD0_OUTP (0x01 << 0)
442 #define S3C2410_GPD0_VD8 (0x02 << 0)
443 #define S3C2400_GPD0_VFRAME (0x02 << 0)
444 #define S3C2442_GPD0_nSPICS1 (0x03 << 0)
446 #define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
447 #define S3C2410_GPD1_INP (0x00 << 2)
448 #define S3C2410_GPD1_OUTP (0x01 << 2)
449 #define S3C2410_GPD1_VD9 (0x02 << 2)
450 #define S3C2400_GPD1_VM (0x02 << 2)
451 #define S3C2442_GPD1_SPICLK1 (0x03 << 2)
453 #define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
454 #define S3C2410_GPD2_INP (0x00 << 4)
455 #define S3C2410_GPD2_OUTP (0x01 << 4)
456 #define S3C2410_GPD2_VD10 (0x02 << 4)
457 #define S3C2400_GPD2_VLINE (0x02 << 4)
459 #define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
460 #define S3C2410_GPD3_INP (0x00 << 6)
461 #define S3C2410_GPD3_OUTP (0x01 << 6)
462 #define S3C2410_GPD3_VD11 (0x02 << 6)
463 #define S3C2400_GPD3_VCLK (0x02 << 6)
465 #define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
466 #define S3C2410_GPD4_INP (0x00 << 8)
467 #define S3C2410_GPD4_OUTP (0x01 << 8)
468 #define S3C2410_GPD4_VD12 (0x02 << 8)
469 #define S3C2400_GPD4_LEND (0x02 << 8)
471 #define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
472 #define S3C2410_GPD5_INP (0x00 << 10)
473 #define S3C2410_GPD5_OUTP (0x01 << 10)
474 #define S3C2410_GPD5_VD13 (0x02 << 10)
475 #define S3C2400_GPD5_TOUT0 (0x02 << 10)
477 #define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
478 #define S3C2410_GPD6_INP (0x00 << 12)
479 #define S3C2410_GPD6_OUTP (0x01 << 12)
480 #define S3C2410_GPD6_VD14 (0x02 << 12)
481 #define S3C2400_GPD6_TOUT1 (0x02 << 12)
483 #define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
484 #define S3C2410_GPD7_INP (0x00 << 14)
485 #define S3C2410_GPD7_OUTP (0x01 << 14)
486 #define S3C2410_GPD7_VD15 (0x02 << 14)
487 #define S3C2400_GPD7_TOUT2 (0x02 << 14)
489 #define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
490 #define S3C2410_GPD8_INP (0x00 << 16)
491 #define S3C2410_GPD8_OUTP (0x01 << 16)
492 #define S3C2410_GPD8_VD16 (0x02 << 16)
493 #define S3C2400_GPD8_TOUT3 (0x02 << 16)
495 #define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
496 #define S3C2410_GPD9_INP (0x00 << 18)
497 #define S3C2410_GPD9_OUTP (0x01 << 18)
498 #define S3C2410_GPD9_VD17 (0x02 << 18)
499 #define S3C2400_GPD9_TCLK0 (0x02 << 18)
500 #define S3C2410_GPD9_MASK (0x03 << 18)
502 #define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
503 #define S3C2410_GPD10_INP (0x00 << 20)
504 #define S3C2410_GPD10_OUTP (0x01 << 20)
505 #define S3C2410_GPD10_VD18 (0x02 << 20)
506 #define S3C2400_GPD10_nWAIT (0x02 << 20)
508 #define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
509 #define S3C2410_GPD11_INP (0x00 << 22)
510 #define S3C2410_GPD11_OUTP (0x01 << 22)
511 #define S3C2410_GPD11_VD19 (0x02 << 22)
513 #define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
514 #define S3C2410_GPD12_INP (0x00 << 24)
515 #define S3C2410_GPD12_OUTP (0x01 << 24)
516 #define S3C2410_GPD12_VD20 (0x02 << 24)
518 #define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
519 #define S3C2410_GPD13_INP (0x00 << 26)
520 #define S3C2410_GPD13_OUTP (0x01 << 26)
521 #define S3C2410_GPD13_VD21 (0x02 << 26)
523 #define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
524 #define S3C2410_GPD14_INP (0x00 << 28)
525 #define S3C2410_GPD14_OUTP (0x01 << 28)
526 #define S3C2410_GPD14_VD22 (0x02 << 28)
528 #define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
529 #define S3C2410_GPD15_INP (0x00 << 30)
530 #define S3C2410_GPD15_OUTP (0x01 << 30)
531 #define S3C2410_GPD15_VD23 (0x02 << 30)
533 #define S3C2410_GPD_PUPDIS(x) (1<<(x))
535 /* S3C2410:
536 * Port E consists of 16 GPIO/Special function
538 * again, the same as port B, but dealing with I2S, SDI, and
539 * more miscellaneous functions
541 * S3C2400:
542 * Port E consists of 12 GPIO/Special function
544 * GPIO / interrupt inputs
547 #define S3C2410_GPECON S3C2410_GPIOREG(0x40)
548 #define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
549 #define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
551 #define S3C2400_GPECON S3C2410_GPIOREG(0x2C)
552 #define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
553 #define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
555 #define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
556 #define S3C2410_GPE0_INP (0x00 << 0)
557 #define S3C2410_GPE0_OUTP (0x01 << 0)
558 #define S3C2410_GPE0_I2SLRCK (0x02 << 0)
559 #define S3C2400_GPE0_EINT0 (0x02 << 0)
560 #define S3C2410_GPE0_MASK (0x03 << 0)
562 #define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
563 #define S3C2410_GPE1_INP (0x00 << 2)
564 #define S3C2410_GPE1_OUTP (0x01 << 2)
565 #define S3C2410_GPE1_I2SSCLK (0x02 << 2)
566 #define S3C2400_GPE1_EINT1 (0x02 << 2)
567 #define S3C2400_GPE1_nSS (0x03 << 2)
568 #define S3C2410_GPE1_MASK (0x03 << 2)
570 #define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
571 #define S3C2410_GPE2_INP (0x00 << 4)
572 #define S3C2410_GPE2_OUTP (0x01 << 4)
573 #define S3C2410_GPE2_CDCLK (0x02 << 4)
574 #define S3C2400_GPE2_EINT2 (0x02 << 4)
575 #define S3C2400_GPE2_I2SSDI (0x03 << 4)
577 #define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
578 #define S3C2410_GPE3_INP (0x00 << 6)
579 #define S3C2410_GPE3_OUTP (0x01 << 6)
580 #define S3C2410_GPE3_I2SSDI (0x02 << 6)
581 #define S3C2400_GPE3_EINT3 (0x02 << 6)
582 #define S3C2400_GPE3_nCTS1 (0x03 << 6)
583 #define S3C2410_GPE3_nSS0 (0x03 << 6)
584 #define S3C2410_GPE3_MASK (0x03 << 6)
586 #define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
587 #define S3C2410_GPE4_INP (0x00 << 8)
588 #define S3C2410_GPE4_OUTP (0x01 << 8)
589 #define S3C2410_GPE4_I2SSDO (0x02 << 8)
590 #define S3C2400_GPE4_EINT4 (0x02 << 8)
591 #define S3C2400_GPE4_nRTS1 (0x03 << 8)
592 #define S3C2410_GPE4_I2SSDI (0x03 << 8)
593 #define S3C2410_GPE4_MASK (0x03 << 8)
595 #define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
596 #define S3C2410_GPE5_INP (0x00 << 10)
597 #define S3C2410_GPE5_OUTP (0x01 << 10)
598 #define S3C2410_GPE5_SDCLK (0x02 << 10)
599 #define S3C2400_GPE5_EINT5 (0x02 << 10)
600 #define S3C2400_GPE5_TCLK1 (0x03 << 10)
602 #define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
603 #define S3C2410_GPE6_INP (0x00 << 12)
604 #define S3C2410_GPE6_OUTP (0x01 << 12)
605 #define S3C2410_GPE6_SDCMD (0x02 << 12)
606 #define S3C2400_GPE6_EINT6 (0x02 << 12)
608 #define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
609 #define S3C2410_GPE7_INP (0x00 << 14)
610 #define S3C2410_GPE7_OUTP (0x01 << 14)
611 #define S3C2410_GPE7_SDDAT0 (0x02 << 14)
612 #define S3C2400_GPE7_EINT7 (0x02 << 14)
614 #define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
615 #define S3C2410_GPE8_INP (0x00 << 16)
616 #define S3C2410_GPE8_OUTP (0x01 << 16)
617 #define S3C2410_GPE8_SDDAT1 (0x02 << 16)
618 #define S3C2400_GPE8_nXDACK0 (0x02 << 16)
620 #define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
621 #define S3C2410_GPE9_INP (0x00 << 18)
622 #define S3C2410_GPE9_OUTP (0x01 << 18)
623 #define S3C2410_GPE9_SDDAT2 (0x02 << 18)
624 #define S3C2400_GPE9_nXDACK1 (0x02 << 18)
625 #define S3C2400_GPE9_nXBACK (0x03 << 18)
627 #define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
628 #define S3C2410_GPE10_INP (0x00 << 20)
629 #define S3C2410_GPE10_OUTP (0x01 << 20)
630 #define S3C2410_GPE10_SDDAT3 (0x02 << 20)
631 #define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
633 #define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
634 #define S3C2410_GPE11_INP (0x00 << 22)
635 #define S3C2410_GPE11_OUTP (0x01 << 22)
636 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
637 #define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
638 #define S3C2400_GPE11_nXBREQ (0x03 << 22)
640 #define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
641 #define S3C2410_GPE12_INP (0x00 << 24)
642 #define S3C2410_GPE12_OUTP (0x01 << 24)
643 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
645 #define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
646 #define S3C2410_GPE13_INP (0x00 << 26)
647 #define S3C2410_GPE13_OUTP (0x01 << 26)
648 #define S3C2410_GPE13_SPICLK0 (0x02 << 26)
650 #define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
651 #define S3C2410_GPE14_INP (0x00 << 28)
652 #define S3C2410_GPE14_OUTP (0x01 << 28)
653 #define S3C2410_GPE14_IICSCL (0x02 << 28)
654 #define S3C2410_GPE14_MASK (0x03 << 28)
656 #define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
657 #define S3C2410_GPE15_INP (0x00 << 30)
658 #define S3C2410_GPE15_OUTP (0x01 << 30)
659 #define S3C2410_GPE15_IICSDA (0x02 << 30)
660 #define S3C2410_GPE15_MASK (0x03 << 30)
662 #define S3C2440_GPE0_ACSYNC (0x03 << 0)
663 #define S3C2440_GPE1_ACBITCLK (0x03 << 2)
664 #define S3C2440_GPE2_ACRESET (0x03 << 4)
665 #define S3C2440_GPE3_ACIN (0x03 << 6)
666 #define S3C2440_GPE4_ACOUT (0x03 << 8)
668 #define S3C2410_GPE_PUPDIS(x) (1<<(x))
670 /* S3C2410:
671 * Port F consists of 8 GPIO/Special function
673 * GPIO / interrupt inputs
675 * GPFCON has 2 bits for each of the input pins on port F
676 * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
678 * pull up works like all other ports.
680 * S3C2400:
681 * Port F consists of 7 GPIO/Special function
683 * GPIO/serial/misc pins
686 #define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
687 #define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
688 #define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
690 #define S3C2400_GPFCON S3C2410_GPIOREG(0x38)
691 #define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
692 #define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
694 #define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
695 #define S3C2410_GPF0_INP (0x00 << 0)
696 #define S3C2410_GPF0_OUTP (0x01 << 0)
697 #define S3C2410_GPF0_EINT0 (0x02 << 0)
698 #define S3C2400_GPF0_RXD0 (0x02 << 0)
700 #define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
701 #define S3C2410_GPF1_INP (0x00 << 2)
702 #define S3C2410_GPF1_OUTP (0x01 << 2)
703 #define S3C2410_GPF1_EINT1 (0x02 << 2)
704 #define S3C2400_GPF1_RXD1 (0x02 << 2)
705 #define S3C2400_GPF1_IICSDA (0x03 << 2)
707 #define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
708 #define S3C2410_GPF2_INP (0x00 << 4)
709 #define S3C2410_GPF2_OUTP (0x01 << 4)
710 #define S3C2410_GPF2_EINT2 (0x02 << 4)
711 #define S3C2400_GPF2_TXD0 (0x02 << 4)
713 #define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
714 #define S3C2410_GPF3_INP (0x00 << 6)
715 #define S3C2410_GPF3_OUTP (0x01 << 6)
716 #define S3C2410_GPF3_EINT3 (0x02 << 6)
717 #define S3C2400_GPF3_TXD1 (0x02 << 6)
718 #define S3C2400_GPF3_IICSCL (0x03 << 6)
720 #define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
721 #define S3C2410_GPF4_INP (0x00 << 8)
722 #define S3C2410_GPF4_OUTP (0x01 << 8)
723 #define S3C2410_GPF4_EINT4 (0x02 << 8)
724 #define S3C2400_GPF4_nRTS0 (0x02 << 8)
725 #define S3C2400_GPF4_nXBACK (0x03 << 8)
727 #define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
728 #define S3C2410_GPF5_INP (0x00 << 10)
729 #define S3C2410_GPF5_OUTP (0x01 << 10)
730 #define S3C2410_GPF5_EINT5 (0x02 << 10)
731 #define S3C2400_GPF5_nCTS0 (0x02 << 10)
732 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
734 #define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
735 #define S3C2410_GPF6_INP (0x00 << 12)
736 #define S3C2410_GPF6_OUTP (0x01 << 12)
737 #define S3C2410_GPF6_EINT6 (0x02 << 12)
738 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
740 #define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
741 #define S3C2410_GPF7_INP (0x00 << 14)
742 #define S3C2410_GPF7_OUTP (0x01 << 14)
743 #define S3C2410_GPF7_EINT7 (0x02 << 14)
745 #define S3C2410_GPF_PUPDIS(x) (1<<(x))
747 /* S3C2410:
748 * Port G consists of 8 GPIO/IRQ/Special function
750 * GPGCON has 2 bits for each of the input pins on port F
751 * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
753 * pull up works like all other ports.
755 * S3C2400:
756 * Port G consists of 10 GPIO/Special function
759 #define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
760 #define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
761 #define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
763 #define S3C2400_GPGCON S3C2410_GPIOREG(0x44)
764 #define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
765 #define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
767 #define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
768 #define S3C2410_GPG0_INP (0x00 << 0)
769 #define S3C2410_GPG0_OUTP (0x01 << 0)
770 #define S3C2410_GPG0_EINT8 (0x02 << 0)
771 #define S3C2400_GPG0_I2SLRCK (0x02 << 0)
773 #define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
774 #define S3C2410_GPG1_INP (0x00 << 2)
775 #define S3C2410_GPG1_OUTP (0x01 << 2)
776 #define S3C2410_GPG1_EINT9 (0x02 << 2)
777 #define S3C2400_GPG1_I2SSCLK (0x02 << 2)
779 #define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
780 #define S3C2410_GPG2_INP (0x00 << 4)
781 #define S3C2410_GPG2_OUTP (0x01 << 4)
782 #define S3C2410_GPG2_EINT10 (0x02 << 4)
783 #define S3C2400_GPG2_CDCLK (0x02 << 4)
785 #define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
786 #define S3C2410_GPG3_INP (0x00 << 6)
787 #define S3C2410_GPG3_OUTP (0x01 << 6)
788 #define S3C2410_GPG3_EINT11 (0x02 << 6)
789 #define S3C2400_GPG3_I2SSDO (0x02 << 6)
790 #define S3C2400_GPG3_I2SSDI (0x03 << 6)
792 #define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
793 #define S3C2410_GPG4_INP (0x00 << 8)
794 #define S3C2410_GPG4_OUTP (0x01 << 8)
795 #define S3C2410_GPG4_EINT12 (0x02 << 8)
796 #define S3C2400_GPG4_MMCCLK (0x02 << 8)
797 #define S3C2400_GPG4_I2SSDI (0x03 << 8)
798 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
800 #define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
801 #define S3C2410_GPG5_INP (0x00 << 10)
802 #define S3C2410_GPG5_OUTP (0x01 << 10)
803 #define S3C2410_GPG5_EINT13 (0x02 << 10)
804 #define S3C2400_GPG5_MMCCMD (0x02 << 10)
805 #define S3C2400_GPG5_IICSDA (0x03 << 10)
806 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
808 #define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
809 #define S3C2410_GPG6_INP (0x00 << 12)
810 #define S3C2410_GPG6_OUTP (0x01 << 12)
811 #define S3C2410_GPG6_EINT14 (0x02 << 12)
812 #define S3C2400_GPG6_MMCDAT (0x02 << 12)
813 #define S3C2400_GPG6_IICSCL (0x03 << 12)
814 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
816 #define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
817 #define S3C2410_GPG7_INP (0x00 << 14)
818 #define S3C2410_GPG7_OUTP (0x01 << 14)
819 #define S3C2410_GPG7_EINT15 (0x02 << 14)
820 #define S3C2410_GPG7_SPICLK1 (0x03 << 14)
821 #define S3C2400_GPG7_SPIMISO (0x02 << 14)
822 #define S3C2400_GPG7_IICSDA (0x03 << 14)
824 #define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
825 #define S3C2410_GPG8_INP (0x00 << 16)
826 #define S3C2410_GPG8_OUTP (0x01 << 16)
827 #define S3C2410_GPG8_EINT16 (0x02 << 16)
828 #define S3C2400_GPG8_SPIMOSI (0x02 << 16)
829 #define S3C2400_GPG8_IICSCL (0x03 << 16)
831 #define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
832 #define S3C2410_GPG9_INP (0x00 << 18)
833 #define S3C2410_GPG9_OUTP (0x01 << 18)
834 #define S3C2410_GPG9_EINT17 (0x02 << 18)
835 #define S3C2400_GPG9_SPICLK (0x02 << 18)
836 #define S3C2400_GPG9_MMCCLK (0x03 << 18)
838 #define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
839 #define S3C2410_GPG10_INP (0x00 << 20)
840 #define S3C2410_GPG10_OUTP (0x01 << 20)
841 #define S3C2410_GPG10_EINT18 (0x02 << 20)
843 #define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
844 #define S3C2410_GPG11_INP (0x00 << 22)
845 #define S3C2410_GPG11_OUTP (0x01 << 22)
846 #define S3C2410_GPG11_EINT19 (0x02 << 22)
847 #define S3C2410_GPG11_TCLK1 (0x03 << 22)
849 #define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
850 #define S3C2410_GPG12_INP (0x00 << 24)
851 #define S3C2410_GPG12_OUTP (0x01 << 24)
852 #define S3C2410_GPG12_EINT20 (0x02 << 24)
853 #define S3C2410_GPG12_XMON (0x03 << 24)
854 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
856 #define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
857 #define S3C2410_GPG13_INP (0x00 << 26)
858 #define S3C2410_GPG13_OUTP (0x01 << 26)
859 #define S3C2410_GPG13_EINT21 (0x02 << 26)
860 #define S3C2410_GPG13_nXPON (0x03 << 26)
862 #define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
863 #define S3C2410_GPG14_INP (0x00 << 28)
864 #define S3C2410_GPG14_OUTP (0x01 << 28)
865 #define S3C2410_GPG14_EINT22 (0x02 << 28)
866 #define S3C2410_GPG14_YMON (0x03 << 28)
868 #define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
869 #define S3C2410_GPG15_INP (0x00 << 30)
870 #define S3C2410_GPG15_OUTP (0x01 << 30)
871 #define S3C2410_GPG15_EINT23 (0x02 << 30)
872 #define S3C2410_GPG15_nYPON (0x03 << 30)
875 #define S3C2410_GPG_PUPDIS(x) (1<<(x))
877 /* Port H consists of11 GPIO/serial/Misc pins
879 * GPGCON has 2 bits for each of the input pins on port F
880 * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
882 * pull up works like all other ports.
885 #define S3C2410_GPHCON S3C2410_GPIOREG(0x70)
886 #define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
887 #define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
889 #define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
890 #define S3C2410_GPH0_INP (0x00 << 0)
891 #define S3C2410_GPH0_OUTP (0x01 << 0)
892 #define S3C2410_GPH0_nCTS0 (0x02 << 0)
894 #define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
895 #define S3C2410_GPH1_INP (0x00 << 2)
896 #define S3C2410_GPH1_OUTP (0x01 << 2)
897 #define S3C2410_GPH1_nRTS0 (0x02 << 2)
899 #define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
900 #define S3C2410_GPH2_INP (0x00 << 4)
901 #define S3C2410_GPH2_OUTP (0x01 << 4)
902 #define S3C2410_GPH2_TXD0 (0x02 << 4)
904 #define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
905 #define S3C2410_GPH3_INP (0x00 << 6)
906 #define S3C2410_GPH3_OUTP (0x01 << 6)
907 #define S3C2410_GPH3_RXD0 (0x02 << 6)
909 #define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
910 #define S3C2410_GPH4_INP (0x00 << 8)
911 #define S3C2410_GPH4_OUTP (0x01 << 8)
912 #define S3C2410_GPH4_TXD1 (0x02 << 8)
914 #define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
915 #define S3C2410_GPH5_INP (0x00 << 10)
916 #define S3C2410_GPH5_OUTP (0x01 << 10)
917 #define S3C2410_GPH5_RXD1 (0x02 << 10)
919 #define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
920 #define S3C2410_GPH6_INP (0x00 << 12)
921 #define S3C2410_GPH6_OUTP (0x01 << 12)
922 #define S3C2410_GPH6_TXD2 (0x02 << 12)
923 #define S3C2410_GPH6_nRTS1 (0x03 << 12)
925 #define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
926 #define S3C2410_GPH7_INP (0x00 << 14)
927 #define S3C2410_GPH7_OUTP (0x01 << 14)
928 #define S3C2410_GPH7_RXD2 (0x02 << 14)
929 #define S3C2410_GPH7_nCTS1 (0x03 << 14)
931 #define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
932 #define S3C2410_GPH8_INP (0x00 << 16)
933 #define S3C2410_GPH8_OUTP (0x01 << 16)
934 #define S3C2410_GPH8_UCLK (0x02 << 16)
936 #define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
937 #define S3C2410_GPH9_INP (0x00 << 18)
938 #define S3C2410_GPH9_OUTP (0x01 << 18)
939 #define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
940 #define S3C2442_GPH9_nSPICS0 (0x03 << 18)
942 #define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
943 #define S3C2410_GPH10_INP (0x00 << 20)
944 #define S3C2410_GPH10_OUTP (0x01 << 20)
945 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
947 /* The S3C2412 and S3C2413 move the GPJ register set to after
948 * GPH, which means all registers after 0x80 are now offset by 0x10
949 * for the 2412/2413 from the 2410/2440/2442
952 /* miscellaneous control */
953 #define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
954 #define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
955 #define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
957 #define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84)
959 /* see clock.h for dclk definitions */
961 /* pullup control on databus */
962 #define S3C2410_MISCCR_SPUCR_HEN (0<<0)
963 #define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
964 #define S3C2410_MISCCR_SPUCR_LEN (0<<1)
965 #define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
967 #define S3C2400_MISCCR_SPUCR_LEN (0<<0)
968 #define S3C2400_MISCCR_SPUCR_LDIS (1<<0)
969 #define S3C2400_MISCCR_SPUCR_HEN (0<<1)
970 #define S3C2400_MISCCR_SPUCR_HDIS (1<<1)
972 #define S3C2400_MISCCR_HZ_STOPEN (0<<2)
973 #define S3C2400_MISCCR_HZ_STOPPREV (1<<2)
975 #define S3C2410_MISCCR_USBDEV (0<<3)
976 #define S3C2410_MISCCR_USBHOST (1<<3)
978 #define S3C2410_MISCCR_CLK0_MPLL (0<<4)
979 #define S3C2410_MISCCR_CLK0_UPLL (1<<4)
980 #define S3C2410_MISCCR_CLK0_FCLK (2<<4)
981 #define S3C2410_MISCCR_CLK0_HCLK (3<<4)
982 #define S3C2410_MISCCR_CLK0_PCLK (4<<4)
983 #define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
984 #define S3C2410_MISCCR_CLK0_MASK (7<<4)
986 #define S3C2412_MISCCR_CLK0_RTC (2<<4)
988 #define S3C2410_MISCCR_CLK1_MPLL (0<<8)
989 #define S3C2410_MISCCR_CLK1_UPLL (1<<8)
990 #define S3C2410_MISCCR_CLK1_FCLK (2<<8)
991 #define S3C2410_MISCCR_CLK1_HCLK (3<<8)
992 #define S3C2410_MISCCR_CLK1_PCLK (4<<8)
993 #define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
994 #define S3C2410_MISCCR_CLK1_MASK (7<<8)
996 #define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
998 #define S3C2410_MISCCR_USBSUSPND0 (1<<12)
999 #define S3C2410_MISCCR_USBSUSPND1 (1<<13)
1001 #define S3C2410_MISCCR_nRSTCON (1<<16)
1003 #define S3C2410_MISCCR_nEN_SCLK0 (1<<17)
1004 #define S3C2410_MISCCR_nEN_SCLK1 (1<<18)
1005 #define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
1006 #define S3C2410_MISCCR_SDSLEEP (7<<17)
1008 /* external interrupt control... */
1009 /* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
1010 * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
1011 * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
1013 * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
1015 * Samsung datasheet p9-25
1017 #define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58)
1018 #define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
1019 #define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
1020 #define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
1022 #define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88)
1023 #define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
1024 #define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
1026 /* values for S3C2410_EXTINT0/1/2 */
1027 #define S3C2410_EXTINT_LOWLEV (0x00)
1028 #define S3C2410_EXTINT_HILEV (0x01)
1029 #define S3C2410_EXTINT_FALLEDGE (0x02)
1030 #define S3C2410_EXTINT_RISEEDGE (0x04)
1031 #define S3C2410_EXTINT_BOTHEDGE (0x06)
1033 /* interrupt filtering conrrol for EINT16..EINT23 */
1034 #define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
1035 #define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
1036 #define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C)
1037 #define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0)
1039 #define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94)
1040 #define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98)
1041 #define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C)
1042 #define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0)
1044 /* values for interrupt filtering */
1045 #define S3C2410_EINTFLT_PCLK (0x00)
1046 #define S3C2410_EINTFLT_EXTCLK (1<<7)
1047 #define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f)
1049 /* removed EINTxxxx defs from here, not meant for this */
1051 /* GSTATUS have miscellaneous information in them
1053 * These move between s3c2410 and s3c2412 style systems.
1056 #define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC)
1057 #define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0)
1058 #define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4)
1059 #define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8)
1060 #define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC)
1062 #define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC)
1063 #define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0)
1064 #define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4)
1065 #define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8)
1066 #define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC)
1068 #define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC)
1069 #define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0)
1070 #define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4)
1071 #define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8)
1072 #define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC)
1074 #define S3C2410_GSTATUS0_nWAIT (1<<3)
1075 #define S3C2410_GSTATUS0_NCON (1<<2)
1076 #define S3C2410_GSTATUS0_RnB (1<<1)
1077 #define S3C2410_GSTATUS0_nBATTFLT (1<<0)
1079 #define S3C2410_GSTATUS1_IDMASK (0xffff0000)
1080 #define S3C2410_GSTATUS1_2410 (0x32410000)
1081 #define S3C2410_GSTATUS1_2412 (0x32412001)
1082 #define S3C2410_GSTATUS1_2440 (0x32440000)
1083 #define S3C2410_GSTATUS1_2442 (0x32440aaa)
1085 #define S3C2410_GSTATUS2_WTRESET (1<<2)
1086 #define S3C2410_GSTATUS2_OFFRESET (1<<1)
1087 #define S3C2410_GSTATUS2_PONRESET (1<<0)
1089 /* open drain control register */
1090 #define S3C2400_OPENCR S3C2410_GPIOREG(0x50)
1092 #define S3C2400_OPENCR_OPC_RXD1DIS (0<<0)
1093 #define S3C2400_OPENCR_OPC_RXD1EN (1<<0)
1094 #define S3C2400_OPENCR_OPC_TXD1DIS (0<<1)
1095 #define S3C2400_OPENCR_OPC_TXD1EN (1<<1)
1096 #define S3C2400_OPENCR_OPC_CMDDIS (0<<2)
1097 #define S3C2400_OPENCR_OPC_CMDEN (1<<2)
1098 #define S3C2400_OPENCR_OPC_DATDIS (0<<3)
1099 #define S3C2400_OPENCR_OPC_DATEN (1<<3)
1100 #define S3C2400_OPENCR_OPC_MISODIS (0<<4)
1101 #define S3C2400_OPENCR_OPC_MISOEN (1<<4)
1102 #define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
1103 #define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
1105 /* 2412/2413 sleep configuration registers */
1107 #define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
1108 #define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
1109 #define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
1110 #define S3C2412_GPESLPCON S3C2410_GPIOREG(0x4C)
1111 #define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
1112 #define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
1113 #define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
1115 /* definitions for each pin bit */
1116 #define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
1117 #define S3C2412_SLPCON_HI(x) ( 0x01 << ((x) * 2))
1118 #define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
1119 #define S3C2412_SLPCON_PDWN(x) ( 0x03 << ((x) * 2))
1120 #define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2))
1122 #endif /* __ASM_ARCH_REGS_GPIO_H */