drivers/tty/serial/jsm/jsm.h

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /************************************************************************
   3  * Copyright 2003 Digi International (www.digi.com)
   4  *
   5  * Copyright (C) 2004 IBM Corporation. All rights reserved.
   6  *
   7  * Contact Information:
   8  * Scott H Kilau <Scott_Kilau@digi.com>
   9  * Wendy Xiong   <wendyx@us.ibm.com>
  10  *
  11  ***********************************************************************/
  12
  13 #ifndef __JSM_DRIVER_H
  14 #define __JSM_DRIVER_H
  15
  16 #include <linux/kernel.h>
  17 #include <linux/types.h>        /* To pick up the varions Linux types */
  18 #include <linux/tty.h>
  19 #include <linux/serial_core.h>
  20 #include <linux/device.h>
  21
  22 /*
  23  * Debugging levels can be set using debug insmod variable
  24  * They can also be compiled out completely.
  25  */
  26 enum {
  27         DBG_INIT        = 0x01,
  28         DBG_BASIC       = 0x02,
  29         DBG_CORE        = 0x04,
  30         DBG_OPEN        = 0x08,
  31         DBG_CLOSE       = 0x10,
  32         DBG_READ        = 0x20,
  33         DBG_WRITE       = 0x40,
  34         DBG_IOCTL       = 0x80,
  35         DBG_PROC        = 0x100,
  36         DBG_PARAM       = 0x200,
  37         DBG_PSCAN       = 0x400,
  38         DBG_EVENT       = 0x800,
  39         DBG_DRAIN       = 0x1000,
  40         DBG_MSIGS       = 0x2000,
  41         DBG_MGMT        = 0x4000,
  42         DBG_INTR        = 0x8000,
  43         DBG_CARR        = 0x10000,
  44 };
  45
  46 #define jsm_dbg(nlevel, pdev, fmt, ...)                         \
  47 do {                                                            \
  48         if (DBG_##nlevel & jsm_debug)                           \
  49                 dev_dbg(pdev->dev, fmt, ##__VA_ARGS__);         \
  50 } while (0)
  51
  52 #define MAXLINES        256
  53 #define MAXPORTS        8
  54 #define MAX_STOPS_SENT  5
  55
  56 /* Board ids */
  57 #define PCI_DEVICE_ID_CLASSIC_4         0x0028
  58 #define PCI_DEVICE_ID_CLASSIC_8         0x0029
  59 #define PCI_DEVICE_ID_CLASSIC_4_422     0x00D0
  60 #define PCI_DEVICE_ID_CLASSIC_8_422     0x00D1
  61 #define PCI_DEVICE_ID_NEO_4             0x00B0
  62 #define PCI_DEVICE_ID_NEO_1_422         0x00CC
  63 #define PCI_DEVICE_ID_NEO_1_422_485     0x00CD
  64 #define PCI_DEVICE_ID_NEO_2_422_485     0x00CE
  65 #define PCIE_DEVICE_ID_NEO_8            0x00F0
  66 #define PCIE_DEVICE_ID_NEO_4            0x00F1
  67 #define PCIE_DEVICE_ID_NEO_4RJ45        0x00F2
  68 #define PCIE_DEVICE_ID_NEO_8RJ45        0x00F3
  69
  70 /* Board type definitions */
  71
  72 #define T_NEO           0000
  73 #define T_CLASSIC       0001
  74 #define T_PCIBUS        0400
  75
  76 /* Board State Definitions */
  77
  78 #define BD_RUNNING      0x0
  79 #define BD_REASON       0x7f
  80 #define BD_NOTFOUND     0x1
  81 #define BD_NOIOPORT     0x2
  82 #define BD_NOMEM        0x3
  83 #define BD_NOBIOS       0x4
  84 #define BD_NOFEP        0x5
  85 #define BD_FAILED       0x6
  86 #define BD_ALLOCATED    0x7
  87 #define BD_TRIBOOT      0x8
  88 #define BD_BADKME       0x80
  89
  90
  91 /* 4 extra for alignment play space */
  92 #define WRITEBUFLEN     ((4096) + 4)
  93
  94 #define JSM_VERSION     "jsm: 1.2-1-INKERNEL"
  95 #define JSM_PARTNUM     "40002438_A-INKERNEL"
  96
  97 struct jsm_board;
  98 struct jsm_channel;
  99
 100 /************************************************************************
 101  * Per board operations structure                                       *
 102  ************************************************************************/
 103 struct board_ops {
 104         irq_handler_t intr;
 105         void (*uart_init)(struct jsm_channel *ch);
 106         void (*uart_off)(struct jsm_channel *ch);
 107         void (*param)(struct jsm_channel *ch);
 108         void (*assert_modem_signals)(struct jsm_channel *ch);
 109         void (*flush_uart_write)(struct jsm_channel *ch);
 110         void (*flush_uart_read)(struct jsm_channel *ch);
 111         void (*disable_receiver)(struct jsm_channel *ch);
 112         void (*enable_receiver)(struct jsm_channel *ch);
 113         void (*send_break)(struct jsm_channel *ch);
 114         void (*clear_break)(struct jsm_channel *ch);
 115         void (*send_start_character)(struct jsm_channel *ch);
 116         void (*send_stop_character)(struct jsm_channel *ch);
 117         void (*copy_data_from_queue_to_uart)(struct jsm_channel *ch);
 118         u32 (*get_uart_bytes_left)(struct jsm_channel *ch);
 119         void (*send_immediate_char)(struct jsm_channel *ch, unsigned char);
 120 };
 121
 122
 123 /*
 124  *      Per-board information
 125  */
 126 struct jsm_board
 127 {
 128         int             boardnum;       /* Board number: 0-32 */
 129
 130         int             type;           /* Type of board */
 131         u8              rev;            /* PCI revision ID */
 132         struct pci_dev  *pci_dev;
 133         u32             maxports;       /* MAX ports this board can handle */
 134
 135         spinlock_t      bd_intr_lock;   /* Used to protect the poller tasklet and
 136                                          * the interrupt routine from each other.
 137                                          */
 138
 139         u32             nasync;         /* Number of ports on card */
 140
 141         u32             irq;            /* Interrupt request number */
 142
 143         u64             membase;        /* Start of base memory of the card */
 144         u64             membase_end;    /* End of base memory of the card */
 145
 146         u8      __iomem *re_map_membase;/* Remapped memory of the card */
 147
 148         u64             iobase;         /* Start of io base of the card */
 149         u64             iobase_end;     /* End of io base of the card */
 150
 151         u32             bd_uart_offset; /* Space between each UART */
 152
 153         struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */
 154
 155         u32             bd_dividend;    /* Board/UARTs specific dividend */
 156
 157         struct board_ops *bd_ops;
 158
 159         struct list_head jsm_board_entry;
 160 };
 161
 162 /************************************************************************
 163  * Device flag definitions for ch_flags.
 164  ************************************************************************/
 165 #define CH_PRON         0x0001          /* Printer on string            */
 166 #define CH_STOP         0x0002          /* Output is stopped            */
 167 #define CH_STOPI        0x0004          /* Input is stopped             */
 168 #define CH_CD           0x0008          /* Carrier is present           */
 169 #define CH_FCAR         0x0010          /* Carrier forced on            */
 170 #define CH_HANGUP       0x0020          /* Hangup received              */
 171
 172 #define CH_RECEIVER_OFF 0x0040          /* Receiver is off              */
 173 #define CH_OPENING      0x0080          /* Port in fragile open state   */
 174 #define CH_CLOSING      0x0100          /* Port in fragile close state  */
 175 #define CH_FIFO_ENABLED 0x0200          /* Port has FIFOs enabled       */
 176 #define CH_TX_FIFO_EMPTY 0x0400         /* TX Fifo is completely empty  */
 177 #define CH_TX_FIFO_LWM  0x0800          /* TX Fifo is below Low Water   */
 178 #define CH_BREAK_SENDING 0x1000         /* Break is being sent          */
 179 #define CH_LOOPBACK 0x2000              /* Channel is in lookback mode  */
 180 #define CH_BAUD0        0x08000         /* Used for checking B0 transitions */
 181
 182 /* Our Read/Error queue sizes */
 183 #define RQUEUEMASK      0x1FFF          /* 8 K - 1 */
 184 #define EQUEUEMASK      0x1FFF          /* 8 K - 1 */
 185 #define RQUEUESIZE      (RQUEUEMASK + 1)
 186 #define EQUEUESIZE      RQUEUESIZE
 187
 188
 189 /************************************************************************
 190  * Channel information structure.
 191  ************************************************************************/
 192 struct jsm_channel {
 193         struct uart_port uart_port;
 194         struct jsm_board        *ch_bd;         /* Board structure pointer      */
 195
 196         spinlock_t      ch_lock;        /* provide for serialization */
 197         wait_queue_head_t ch_flags_wait;
 198
 199         u32             ch_portnum;     /* Port number, 0 offset.       */
 200         u32             ch_open_count;  /* open count                   */
 201         u32             ch_flags;       /* Channel flags                */
 202
 203         u64             ch_close_delay; /* How long we should drop RTS/DTR for */
 204
 205         tcflag_t        ch_c_iflag;     /* channel iflags               */
 206         tcflag_t        ch_c_cflag;     /* channel cflags               */
 207         tcflag_t        ch_c_oflag;     /* channel oflags               */
 208         tcflag_t        ch_c_lflag;     /* channel lflags               */
 209         u8              ch_stopc;       /* Stop character               */
 210         u8              ch_startc;      /* Start character              */
 211
 212         u8              ch_mostat;      /* FEP output modem status      */
 213         u8              ch_mistat;      /* FEP input modem status       */
 214
 215         /* Pointers to the "mapped" UART structs */
 216         struct neo_uart_struct __iomem *ch_neo_uart; /* NEO card */
 217         struct cls_uart_struct __iomem *ch_cls_uart; /* Classic card */
 218
 219         u8              ch_cached_lsr;  /* Cached value of the LSR register */
 220
 221         u8              *ch_rqueue;     /* Our read queue buffer - malloc'ed */
 222         u16             ch_r_head;      /* Head location of the read queue */
 223         u16             ch_r_tail;      /* Tail location of the read queue */
 224
 225         u8              *ch_equeue;     /* Our error queue buffer - malloc'ed */
 226         u16             ch_e_head;      /* Head location of the error queue */
 227         u16             ch_e_tail;      /* Tail location of the error queue */
 228
 229         u64             ch_rxcount;     /* total of data received so far */
 230         u64             ch_txcount;     /* total of data transmitted so far */
 231
 232         u8              ch_r_tlevel;    /* Receive Trigger level */
 233         u8              ch_t_tlevel;    /* Transmit Trigger level */
 234
 235         u8              ch_r_watermark; /* Receive Watermark */
 236
 237
 238         u32             ch_stops_sent;  /* How many times I have sent a stop character
 239                                          * to try to stop the other guy sending.
 240                                          */
 241         u64             ch_err_parity;  /* Count of parity errors on channel */
 242         u64             ch_err_frame;   /* Count of framing errors on channel */
 243         u64             ch_err_break;   /* Count of breaks on channel */
 244         u64             ch_err_overrun; /* Count of overruns on channel */
 245
 246         u64             ch_xon_sends;   /* Count of xons transmitted */
 247         u64             ch_xoff_sends;  /* Count of xoffs transmitted */
 248 };
 249
 250 /************************************************************************
 251  * Per channel/port Classic UART structures                             *
 252  ************************************************************************
 253  *              Base Structure Entries Usage Meanings to Host           *
 254  *                                                                      *
 255  *      W = read write          R = read only                           *
 256  *                      U = Unused.                                     *
 257  ************************************************************************/
 258
 259 struct cls_uart_struct {
 260         u8 txrx;        /* WR  RHR/THR - Holding Reg */
 261         u8 ier;         /* WR  IER - Interrupt Enable Reg */
 262         u8 isr_fcr;     /* WR  ISR/FCR - Interrupt Status Reg/Fifo Control Reg*/
 263         u8 lcr;         /* WR  LCR - Line Control Reg */
 264         u8 mcr;         /* WR  MCR - Modem Control Reg */
 265         u8 lsr;         /* WR  LSR - Line Status Reg */
 266         u8 msr;         /* WR  MSR - Modem Status Reg */
 267         u8 spr;         /* WR  SPR - Scratch Pad Reg */
 268 };
 269
 270 /* Where to read the interrupt register (8bits) */
 271 #define UART_CLASSIC_POLL_ADDR_OFFSET   0x40
 272
 273 #define UART_EXAR654_ENHANCED_REGISTER_SET 0xBF
 274
 275 #define UART_16654_FCR_TXTRIGGER_8      0x0
 276 #define UART_16654_FCR_TXTRIGGER_16     0x10
 277 #define UART_16654_FCR_TXTRIGGER_32     0x20
 278 #define UART_16654_FCR_TXTRIGGER_56     0x30
 279
 280 #define UART_16654_FCR_RXTRIGGER_8      0x0
 281 #define UART_16654_FCR_RXTRIGGER_16     0x40
 282 #define UART_16654_FCR_RXTRIGGER_56     0x80
 283 #define UART_16654_FCR_RXTRIGGER_60     0xC0
 284
 285 #define UART_IIR_CTSRTS                 0x20    /* Received CTS/RTS change of state */
 286 #define UART_IIR_RDI_TIMEOUT            0x0C    /* Receiver data TIMEOUT */
 287
 288 /*
 289  * These are the EXTENDED definitions for the Exar 654's Interrupt
 290  * Enable Register.
 291  */
 292 #define UART_EXAR654_EFR_ECB      0x10    /* Enhanced control bit */
 293 #define UART_EXAR654_EFR_IXON     0x2     /* Receiver compares Xon1/Xoff1 */
 294 #define UART_EXAR654_EFR_IXOFF    0x8     /* Transmit Xon1/Xoff1 */
 295 #define UART_EXAR654_EFR_RTSDTR   0x40    /* Auto RTS/DTR Flow Control Enable */
 296 #define UART_EXAR654_EFR_CTSDSR   0x80    /* Auto CTS/DSR Flow COntrol Enable */
 297
 298 #define UART_EXAR654_XOFF_DETECT  0x1     /* Indicates whether chip saw an incoming XOFF char  */
 299 #define UART_EXAR654_XON_DETECT   0x2     /* Indicates whether chip saw an incoming XON char */
 300
 301 #define UART_EXAR654_IER_XOFF     0x20    /* Xoff Interrupt Enable */
 302 #define UART_EXAR654_IER_RTSDTR   0x40    /* Output Interrupt Enable */
 303 #define UART_EXAR654_IER_CTSDSR   0x80    /* Input Interrupt Enable */
 304
 305 /************************************************************************
 306  * Per channel/port NEO UART structure                                  *
 307  ************************************************************************
 308  *              Base Structure Entries Usage Meanings to Host           *
 309  *                                                                      *
 310  *      W = read write          R = read only                           *
 311  *                      U = Unused.                                     *
 312  ************************************************************************/
 313
 314 struct neo_uart_struct {
 315          u8 txrx;               /* WR   RHR/THR - Holding Reg */
 316          u8 ier;                /* WR   IER - Interrupt Enable Reg */
 317          u8 isr_fcr;            /* WR   ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
 318          u8 lcr;                /* WR   LCR - Line Control Reg */
 319          u8 mcr;                /* WR   MCR - Modem Control Reg */
 320          u8 lsr;                /* WR   LSR - Line Status Reg */
 321          u8 msr;                /* WR   MSR - Modem Status Reg */
 322          u8 spr;                /* WR   SPR - Scratch Pad Reg */
 323          u8 fctr;               /* WR   FCTR - Feature Control Reg */
 324          u8 efr;                /* WR   EFR - Enhanced Function Reg */
 325          u8 tfifo;              /* WR   TXCNT/TXTRG - Transmit FIFO Reg */
 326          u8 rfifo;              /* WR   RXCNT/RXTRG - Receive FIFO Reg */
 327          u8 xoffchar1;  /* WR   XOFF 1 - XOff Character 1 Reg */
 328          u8 xoffchar2;  /* WR   XOFF 2 - XOff Character 2 Reg */
 329          u8 xonchar1;   /* WR   XON 1 - Xon Character 1 Reg */
 330          u8 xonchar2;   /* WR   XON 2 - XOn Character 2 Reg */
 331
 332          u8 reserved1[0x2ff - 0x200]; /* U      Reserved by Exar */
 333          u8 txrxburst[64];      /* RW   64 bytes of RX/TX FIFO Data */
 334          u8 reserved2[0x37f - 0x340]; /* U      Reserved by Exar */
 335          u8 rxburst_with_errors[64];    /* R    64 bytes of RX FIFO Data + LSR */
 336 };
 337
 338 /* Where to read the extended interrupt register (32bits instead of 8bits) */
 339 #define UART_17158_POLL_ADDR_OFFSET     0x80
 340
 341 /*
 342  * These are the redefinitions for the FCTR on the XR17C158, since
 343  * Exar made them different than their earlier design. (XR16C854)
 344  */
 345
 346 /* These are only applicable when table D is selected */
 347 #define UART_17158_FCTR_RTS_NODELAY     0x00
 348 #define UART_17158_FCTR_RTS_4DELAY      0x01
 349 #define UART_17158_FCTR_RTS_6DELAY      0x02
 350 #define UART_17158_FCTR_RTS_8DELAY      0x03
 351 #define UART_17158_FCTR_RTS_12DELAY     0x12
 352 #define UART_17158_FCTR_RTS_16DELAY     0x05
 353 #define UART_17158_FCTR_RTS_20DELAY     0x13
 354 #define UART_17158_FCTR_RTS_24DELAY     0x06
 355 #define UART_17158_FCTR_RTS_28DELAY     0x14
 356 #define UART_17158_FCTR_RTS_32DELAY     0x07
 357 #define UART_17158_FCTR_RTS_36DELAY     0x16
 358 #define UART_17158_FCTR_RTS_40DELAY     0x08
 359 #define UART_17158_FCTR_RTS_44DELAY     0x09
 360 #define UART_17158_FCTR_RTS_48DELAY     0x10
 361 #define UART_17158_FCTR_RTS_52DELAY     0x11
 362
 363 #define UART_17158_FCTR_RTS_IRDA        0x10
 364 #define UART_17158_FCTR_RS485           0x20
 365 #define UART_17158_FCTR_TRGA            0x00
 366 #define UART_17158_FCTR_TRGB            0x40
 367 #define UART_17158_FCTR_TRGC            0x80
 368 #define UART_17158_FCTR_TRGD            0xC0
 369
 370 /* 17158 trigger table selects.. */
 371 #define UART_17158_FCTR_BIT6            0x40
 372 #define UART_17158_FCTR_BIT7            0x80
 373
 374 /* 17158 TX/RX memmapped buffer offsets */
 375 #define UART_17158_RX_FIFOSIZE          64
 376 #define UART_17158_TX_FIFOSIZE          64
 377
 378 /* 17158 Extended IIR's */
 379 #define UART_17158_IIR_RDI_TIMEOUT      0x0C    /* Receiver data TIMEOUT */
 380 #define UART_17158_IIR_XONXOFF          0x10    /* Received an XON/XOFF char */
 381 #define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */
 382 #define UART_17158_IIR_FIFO_ENABLED     0xC0    /* 16550 FIFOs are Enabled */
 383
 384 /*
 385  * These are the extended interrupts that get sent
 386  * back to us from the UART's 32bit interrupt register
 387  */
 388 #define UART_17158_RX_LINE_STATUS       0x1     /* RX Ready */
 389 #define UART_17158_RXRDY_TIMEOUT        0x2     /* RX Ready Timeout */
 390 #define UART_17158_TXRDY                0x3     /* TX Ready */
 391 #define UART_17158_MSR                  0x4     /* Modem State Change */
 392 #define UART_17158_TX_AND_FIFO_CLR      0x40    /* Transmitter Holding Reg Empty */
 393 #define UART_17158_RX_FIFO_DATA_ERROR   0x80    /* UART detected an RX FIFO Data error */
 394
 395 /*
 396  * These are the EXTENDED definitions for the 17C158's Interrupt
 397  * Enable Register.
 398  */
 399 #define UART_17158_EFR_ECB      0x10    /* Enhanced control bit */
 400 #define UART_17158_EFR_IXON     0x2     /* Receiver compares Xon1/Xoff1 */
 401 #define UART_17158_EFR_IXOFF    0x8     /* Transmit Xon1/Xoff1 */
 402 #define UART_17158_EFR_RTSDTR   0x40    /* Auto RTS/DTR Flow Control Enable */
 403 #define UART_17158_EFR_CTSDSR   0x80    /* Auto CTS/DSR Flow COntrol Enable */
 404
 405 #define UART_17158_XOFF_DETECT  0x1     /* Indicates whether chip saw an incoming XOFF char */
 406 #define UART_17158_XON_DETECT   0x2     /* Indicates whether chip saw an incoming XON char */
 407
 408 #define UART_17158_IER_RSVD1    0x10    /* Reserved by Exar */
 409 #define UART_17158_IER_XOFF     0x20    /* Xoff Interrupt Enable */
 410 #define UART_17158_IER_RTSDTR   0x40    /* Output Interrupt Enable */
 411 #define UART_17158_IER_CTSDSR   0x80    /* Input Interrupt Enable */
 412
 413 #define PCI_DEVICE_NEO_2DB9_PCI_NAME            "Neo 2 - DB9 Universal PCI"
 414 #define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME         "Neo 2 - DB9 Universal PCI - Powered Ring Indicator"
 415 #define PCI_DEVICE_NEO_2RJ45_PCI_NAME           "Neo 2 - RJ45 Universal PCI"
 416 #define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME        "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator"
 417 #define PCIE_DEVICE_NEO_IBM_PCI_NAME            "Neo 4 - PCI Express - IBM"
 418
 419 /*
 420  * Our Global Variables.
 421  */
 422 extern struct   uart_driver jsm_uart_driver;
 423 extern struct   board_ops jsm_neo_ops;
 424 extern struct   board_ops jsm_cls_ops;
 425 extern int      jsm_debug;
 426
 427 /*************************************************************************
 428  *
 429  * Prototypes for non-static functions used in more than one module
 430  *
 431  *************************************************************************/
 432 int jsm_tty_init(struct jsm_board *);
 433 int jsm_uart_port_init(struct jsm_board *);
 434 int jsm_remove_uart_port(struct jsm_board *);
 435 void jsm_input(struct jsm_channel *ch);
 436 void jsm_check_queue_flow_control(struct jsm_channel *ch);
 437
 438 #endif