2 BlueZ - Bluetooth protocol stack for Linux
3 Copyright (C) 2000-2001 Qualcomm Incorporated
4 Copyright (C) 2011 ProFUSION Embedded Systems
6 Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License version 2 as
10 published by the Free Software Foundation;
12 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
13 OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
14 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
15 IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
16 CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
17 WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
18 ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
19 OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
21 ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
22 COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
23 SOFTWARE IS DISCLAIMED.
26 /* Bluetooth HCI core. */
28 #include <linux/export.h>
29 #include <linux/idr.h>
30 #include <linux/rfkill.h>
31 #include <linux/debugfs.h>
32 #include <linux/crypto.h>
33 #include <linux/property.h>
34 #include <asm/unaligned.h>
36 #include <net/bluetooth/bluetooth.h>
37 #include <net/bluetooth/hci_core.h>
38 #include <net/bluetooth/l2cap.h>
39 #include <net/bluetooth/mgmt.h>
41 #include "hci_request.h"
42 #include "hci_debugfs.h"
46 static void hci_rx_work(struct work_struct
*work
);
47 static void hci_cmd_work(struct work_struct
*work
);
48 static void hci_tx_work(struct work_struct
*work
);
51 LIST_HEAD(hci_dev_list
);
52 DEFINE_RWLOCK(hci_dev_list_lock
);
54 /* HCI callback list */
55 LIST_HEAD(hci_cb_list
);
56 DEFINE_MUTEX(hci_cb_list_lock
);
58 /* HCI ID Numbering */
59 static DEFINE_IDA(hci_index_ida
);
61 /* ---- HCI debugfs entries ---- */
63 static ssize_t
dut_mode_read(struct file
*file
, char __user
*user_buf
,
64 size_t count
, loff_t
*ppos
)
66 struct hci_dev
*hdev
= file
->private_data
;
69 buf
[0] = hci_dev_test_flag(hdev
, HCI_DUT_MODE
) ? 'Y' : 'N';
72 return simple_read_from_buffer(user_buf
, count
, ppos
, buf
, 2);
75 static ssize_t
dut_mode_write(struct file
*file
, const char __user
*user_buf
,
76 size_t count
, loff_t
*ppos
)
78 struct hci_dev
*hdev
= file
->private_data
;
83 if (!test_bit(HCI_UP
, &hdev
->flags
))
86 err
= kstrtobool_from_user(user_buf
, count
, &enable
);
90 if (enable
== hci_dev_test_flag(hdev
, HCI_DUT_MODE
))
93 hci_req_sync_lock(hdev
);
95 skb
= __hci_cmd_sync(hdev
, HCI_OP_ENABLE_DUT_MODE
, 0, NULL
,
98 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
,
100 hci_req_sync_unlock(hdev
);
107 hci_dev_change_flag(hdev
, HCI_DUT_MODE
);
112 static const struct file_operations dut_mode_fops
= {
114 .read
= dut_mode_read
,
115 .write
= dut_mode_write
,
116 .llseek
= default_llseek
,
119 static ssize_t
vendor_diag_read(struct file
*file
, char __user
*user_buf
,
120 size_t count
, loff_t
*ppos
)
122 struct hci_dev
*hdev
= file
->private_data
;
125 buf
[0] = hci_dev_test_flag(hdev
, HCI_VENDOR_DIAG
) ? 'Y' : 'N';
128 return simple_read_from_buffer(user_buf
, count
, ppos
, buf
, 2);
131 static ssize_t
vendor_diag_write(struct file
*file
, const char __user
*user_buf
,
132 size_t count
, loff_t
*ppos
)
134 struct hci_dev
*hdev
= file
->private_data
;
138 err
= kstrtobool_from_user(user_buf
, count
, &enable
);
142 /* When the diagnostic flags are not persistent and the transport
143 * is not active or in user channel operation, then there is no need
144 * for the vendor callback. Instead just store the desired value and
145 * the setting will be programmed when the controller gets powered on.
147 if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
) &&
148 (!test_bit(HCI_RUNNING
, &hdev
->flags
) ||
149 hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)))
152 hci_req_sync_lock(hdev
);
153 err
= hdev
->set_diag(hdev
, enable
);
154 hci_req_sync_unlock(hdev
);
161 hci_dev_set_flag(hdev
, HCI_VENDOR_DIAG
);
163 hci_dev_clear_flag(hdev
, HCI_VENDOR_DIAG
);
168 static const struct file_operations vendor_diag_fops
= {
170 .read
= vendor_diag_read
,
171 .write
= vendor_diag_write
,
172 .llseek
= default_llseek
,
175 static void hci_debugfs_create_basic(struct hci_dev
*hdev
)
177 debugfs_create_file("dut_mode", 0644, hdev
->debugfs
, hdev
,
181 debugfs_create_file("vendor_diag", 0644, hdev
->debugfs
, hdev
,
185 static int hci_reset_req(struct hci_request
*req
, unsigned long opt
)
187 BT_DBG("%s %ld", req
->hdev
->name
, opt
);
190 set_bit(HCI_RESET
, &req
->hdev
->flags
);
191 hci_req_add(req
, HCI_OP_RESET
, 0, NULL
);
195 static void bredr_init(struct hci_request
*req
)
197 req
->hdev
->flow_ctl_mode
= HCI_FLOW_CTL_MODE_PACKET_BASED
;
199 /* Read Local Supported Features */
200 hci_req_add(req
, HCI_OP_READ_LOCAL_FEATURES
, 0, NULL
);
202 /* Read Local Version */
203 hci_req_add(req
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
);
205 /* Read BD Address */
206 hci_req_add(req
, HCI_OP_READ_BD_ADDR
, 0, NULL
);
209 static void amp_init1(struct hci_request
*req
)
211 req
->hdev
->flow_ctl_mode
= HCI_FLOW_CTL_MODE_BLOCK_BASED
;
213 /* Read Local Version */
214 hci_req_add(req
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
);
216 /* Read Local Supported Commands */
217 hci_req_add(req
, HCI_OP_READ_LOCAL_COMMANDS
, 0, NULL
);
219 /* Read Local AMP Info */
220 hci_req_add(req
, HCI_OP_READ_LOCAL_AMP_INFO
, 0, NULL
);
222 /* Read Data Blk size */
223 hci_req_add(req
, HCI_OP_READ_DATA_BLOCK_SIZE
, 0, NULL
);
225 /* Read Flow Control Mode */
226 hci_req_add(req
, HCI_OP_READ_FLOW_CONTROL_MODE
, 0, NULL
);
228 /* Read Location Data */
229 hci_req_add(req
, HCI_OP_READ_LOCATION_DATA
, 0, NULL
);
232 static int amp_init2(struct hci_request
*req
)
234 /* Read Local Supported Features. Not all AMP controllers
235 * support this so it's placed conditionally in the second
238 if (req
->hdev
->commands
[14] & 0x20)
239 hci_req_add(req
, HCI_OP_READ_LOCAL_FEATURES
, 0, NULL
);
244 static int hci_init1_req(struct hci_request
*req
, unsigned long opt
)
246 struct hci_dev
*hdev
= req
->hdev
;
248 BT_DBG("%s %ld", hdev
->name
, opt
);
251 if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
))
252 hci_reset_req(req
, 0);
254 switch (hdev
->dev_type
) {
262 bt_dev_err(hdev
, "Unknown device type %d", hdev
->dev_type
);
269 static void bredr_setup(struct hci_request
*req
)
274 /* Read Buffer Size (ACL mtu, max pkt, etc.) */
275 hci_req_add(req
, HCI_OP_READ_BUFFER_SIZE
, 0, NULL
);
277 /* Read Class of Device */
278 hci_req_add(req
, HCI_OP_READ_CLASS_OF_DEV
, 0, NULL
);
280 /* Read Local Name */
281 hci_req_add(req
, HCI_OP_READ_LOCAL_NAME
, 0, NULL
);
283 /* Read Voice Setting */
284 hci_req_add(req
, HCI_OP_READ_VOICE_SETTING
, 0, NULL
);
286 /* Read Number of Supported IAC */
287 hci_req_add(req
, HCI_OP_READ_NUM_SUPPORTED_IAC
, 0, NULL
);
289 /* Read Current IAC LAP */
290 hci_req_add(req
, HCI_OP_READ_CURRENT_IAC_LAP
, 0, NULL
);
292 /* Clear Event Filters */
293 flt_type
= HCI_FLT_CLEAR_ALL
;
294 hci_req_add(req
, HCI_OP_SET_EVENT_FLT
, 1, &flt_type
);
296 /* Connection accept timeout ~20 secs */
297 param
= cpu_to_le16(0x7d00);
298 hci_req_add(req
, HCI_OP_WRITE_CA_TIMEOUT
, 2, ¶m
);
301 static void le_setup(struct hci_request
*req
)
303 struct hci_dev
*hdev
= req
->hdev
;
305 /* Read LE Buffer Size */
306 hci_req_add(req
, HCI_OP_LE_READ_BUFFER_SIZE
, 0, NULL
);
308 /* Read LE Local Supported Features */
309 hci_req_add(req
, HCI_OP_LE_READ_LOCAL_FEATURES
, 0, NULL
);
311 /* Read LE Supported States */
312 hci_req_add(req
, HCI_OP_LE_READ_SUPPORTED_STATES
, 0, NULL
);
314 /* LE-only controllers have LE implicitly enabled */
315 if (!lmp_bredr_capable(hdev
))
316 hci_dev_set_flag(hdev
, HCI_LE_ENABLED
);
319 static void hci_setup_event_mask(struct hci_request
*req
)
321 struct hci_dev
*hdev
= req
->hdev
;
323 /* The second byte is 0xff instead of 0x9f (two reserved bits
324 * disabled) since a Broadcom 1.2 dongle doesn't respond to the
327 u8 events
[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 };
329 /* CSR 1.1 dongles does not accept any bitfield so don't try to set
330 * any event mask for pre 1.2 devices.
332 if (hdev
->hci_ver
< BLUETOOTH_VER_1_2
)
335 if (lmp_bredr_capable(hdev
)) {
336 events
[4] |= 0x01; /* Flow Specification Complete */
338 /* Use a different default for LE-only devices */
339 memset(events
, 0, sizeof(events
));
340 events
[1] |= 0x20; /* Command Complete */
341 events
[1] |= 0x40; /* Command Status */
342 events
[1] |= 0x80; /* Hardware Error */
344 /* If the controller supports the Disconnect command, enable
345 * the corresponding event. In addition enable packet flow
346 * control related events.
348 if (hdev
->commands
[0] & 0x20) {
349 events
[0] |= 0x10; /* Disconnection Complete */
350 events
[2] |= 0x04; /* Number of Completed Packets */
351 events
[3] |= 0x02; /* Data Buffer Overflow */
354 /* If the controller supports the Read Remote Version
355 * Information command, enable the corresponding event.
357 if (hdev
->commands
[2] & 0x80)
358 events
[1] |= 0x08; /* Read Remote Version Information
362 if (hdev
->le_features
[0] & HCI_LE_ENCRYPTION
) {
363 events
[0] |= 0x80; /* Encryption Change */
364 events
[5] |= 0x80; /* Encryption Key Refresh Complete */
368 if (lmp_inq_rssi_capable(hdev
) ||
369 test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE
, &hdev
->quirks
))
370 events
[4] |= 0x02; /* Inquiry Result with RSSI */
372 if (lmp_ext_feat_capable(hdev
))
373 events
[4] |= 0x04; /* Read Remote Extended Features Complete */
375 if (lmp_esco_capable(hdev
)) {
376 events
[5] |= 0x08; /* Synchronous Connection Complete */
377 events
[5] |= 0x10; /* Synchronous Connection Changed */
380 if (lmp_sniffsubr_capable(hdev
))
381 events
[5] |= 0x20; /* Sniff Subrating */
383 if (lmp_pause_enc_capable(hdev
))
384 events
[5] |= 0x80; /* Encryption Key Refresh Complete */
386 if (lmp_ext_inq_capable(hdev
))
387 events
[5] |= 0x40; /* Extended Inquiry Result */
389 if (lmp_no_flush_capable(hdev
))
390 events
[7] |= 0x01; /* Enhanced Flush Complete */
392 if (lmp_lsto_capable(hdev
))
393 events
[6] |= 0x80; /* Link Supervision Timeout Changed */
395 if (lmp_ssp_capable(hdev
)) {
396 events
[6] |= 0x01; /* IO Capability Request */
397 events
[6] |= 0x02; /* IO Capability Response */
398 events
[6] |= 0x04; /* User Confirmation Request */
399 events
[6] |= 0x08; /* User Passkey Request */
400 events
[6] |= 0x10; /* Remote OOB Data Request */
401 events
[6] |= 0x20; /* Simple Pairing Complete */
402 events
[7] |= 0x04; /* User Passkey Notification */
403 events
[7] |= 0x08; /* Keypress Notification */
404 events
[7] |= 0x10; /* Remote Host Supported
405 * Features Notification
409 if (lmp_le_capable(hdev
))
410 events
[7] |= 0x20; /* LE Meta-Event */
412 hci_req_add(req
, HCI_OP_SET_EVENT_MASK
, sizeof(events
), events
);
415 static int hci_init2_req(struct hci_request
*req
, unsigned long opt
)
417 struct hci_dev
*hdev
= req
->hdev
;
419 if (hdev
->dev_type
== HCI_AMP
)
420 return amp_init2(req
);
422 if (lmp_bredr_capable(hdev
))
425 hci_dev_clear_flag(hdev
, HCI_BREDR_ENABLED
);
427 if (lmp_le_capable(hdev
))
430 /* All Bluetooth 1.2 and later controllers should support the
431 * HCI command for reading the local supported commands.
433 * Unfortunately some controllers indicate Bluetooth 1.2 support,
434 * but do not have support for this command. If that is the case,
435 * the driver can quirk the behavior and skip reading the local
436 * supported commands.
438 if (hdev
->hci_ver
> BLUETOOTH_VER_1_1
&&
439 !test_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS
, &hdev
->quirks
))
440 hci_req_add(req
, HCI_OP_READ_LOCAL_COMMANDS
, 0, NULL
);
442 if (lmp_ssp_capable(hdev
)) {
443 /* When SSP is available, then the host features page
444 * should also be available as well. However some
445 * controllers list the max_page as 0 as long as SSP
446 * has not been enabled. To achieve proper debugging
447 * output, force the minimum max_page to 1 at least.
449 hdev
->max_page
= 0x01;
451 if (hci_dev_test_flag(hdev
, HCI_SSP_ENABLED
)) {
454 hci_req_add(req
, HCI_OP_WRITE_SSP_MODE
,
455 sizeof(mode
), &mode
);
457 struct hci_cp_write_eir cp
;
459 memset(hdev
->eir
, 0, sizeof(hdev
->eir
));
460 memset(&cp
, 0, sizeof(cp
));
462 hci_req_add(req
, HCI_OP_WRITE_EIR
, sizeof(cp
), &cp
);
466 if (lmp_inq_rssi_capable(hdev
) ||
467 test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE
, &hdev
->quirks
)) {
470 /* If Extended Inquiry Result events are supported, then
471 * they are clearly preferred over Inquiry Result with RSSI
474 mode
= lmp_ext_inq_capable(hdev
) ? 0x02 : 0x01;
476 hci_req_add(req
, HCI_OP_WRITE_INQUIRY_MODE
, 1, &mode
);
479 if (lmp_inq_tx_pwr_capable(hdev
))
480 hci_req_add(req
, HCI_OP_READ_INQ_RSP_TX_POWER
, 0, NULL
);
482 if (lmp_ext_feat_capable(hdev
)) {
483 struct hci_cp_read_local_ext_features cp
;
486 hci_req_add(req
, HCI_OP_READ_LOCAL_EXT_FEATURES
,
490 if (hci_dev_test_flag(hdev
, HCI_LINK_SECURITY
)) {
492 hci_req_add(req
, HCI_OP_WRITE_AUTH_ENABLE
, sizeof(enable
),
499 static void hci_setup_link_policy(struct hci_request
*req
)
501 struct hci_dev
*hdev
= req
->hdev
;
502 struct hci_cp_write_def_link_policy cp
;
505 if (lmp_rswitch_capable(hdev
))
506 link_policy
|= HCI_LP_RSWITCH
;
507 if (lmp_hold_capable(hdev
))
508 link_policy
|= HCI_LP_HOLD
;
509 if (lmp_sniff_capable(hdev
))
510 link_policy
|= HCI_LP_SNIFF
;
511 if (lmp_park_capable(hdev
))
512 link_policy
|= HCI_LP_PARK
;
514 cp
.policy
= cpu_to_le16(link_policy
);
515 hci_req_add(req
, HCI_OP_WRITE_DEF_LINK_POLICY
, sizeof(cp
), &cp
);
518 static void hci_set_le_support(struct hci_request
*req
)
520 struct hci_dev
*hdev
= req
->hdev
;
521 struct hci_cp_write_le_host_supported cp
;
523 /* LE-only devices do not support explicit enablement */
524 if (!lmp_bredr_capable(hdev
))
527 memset(&cp
, 0, sizeof(cp
));
529 if (hci_dev_test_flag(hdev
, HCI_LE_ENABLED
)) {
534 if (cp
.le
!= lmp_host_le_capable(hdev
))
535 hci_req_add(req
, HCI_OP_WRITE_LE_HOST_SUPPORTED
, sizeof(cp
),
539 static void hci_set_event_mask_page_2(struct hci_request
*req
)
541 struct hci_dev
*hdev
= req
->hdev
;
542 u8 events
[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
543 bool changed
= false;
545 /* If Connectionless Slave Broadcast master role is supported
546 * enable all necessary events for it.
548 if (lmp_csb_master_capable(hdev
)) {
549 events
[1] |= 0x40; /* Triggered Clock Capture */
550 events
[1] |= 0x80; /* Synchronization Train Complete */
551 events
[2] |= 0x10; /* Slave Page Response Timeout */
552 events
[2] |= 0x20; /* CSB Channel Map Change */
556 /* If Connectionless Slave Broadcast slave role is supported
557 * enable all necessary events for it.
559 if (lmp_csb_slave_capable(hdev
)) {
560 events
[2] |= 0x01; /* Synchronization Train Received */
561 events
[2] |= 0x02; /* CSB Receive */
562 events
[2] |= 0x04; /* CSB Timeout */
563 events
[2] |= 0x08; /* Truncated Page Complete */
567 /* Enable Authenticated Payload Timeout Expired event if supported */
568 if (lmp_ping_capable(hdev
) || hdev
->le_features
[0] & HCI_LE_PING
) {
573 /* Some Broadcom based controllers indicate support for Set Event
574 * Mask Page 2 command, but then actually do not support it. Since
575 * the default value is all bits set to zero, the command is only
576 * required if the event mask has to be changed. In case no change
577 * to the event mask is needed, skip this command.
580 hci_req_add(req
, HCI_OP_SET_EVENT_MASK_PAGE_2
,
581 sizeof(events
), events
);
584 static int hci_init3_req(struct hci_request
*req
, unsigned long opt
)
586 struct hci_dev
*hdev
= req
->hdev
;
589 hci_setup_event_mask(req
);
591 if (hdev
->commands
[6] & 0x20 &&
592 !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
)) {
593 struct hci_cp_read_stored_link_key cp
;
595 bacpy(&cp
.bdaddr
, BDADDR_ANY
);
597 hci_req_add(req
, HCI_OP_READ_STORED_LINK_KEY
, sizeof(cp
), &cp
);
600 if (hdev
->commands
[5] & 0x10)
601 hci_setup_link_policy(req
);
603 if (hdev
->commands
[8] & 0x01)
604 hci_req_add(req
, HCI_OP_READ_PAGE_SCAN_ACTIVITY
, 0, NULL
);
606 /* Some older Broadcom based Bluetooth 1.2 controllers do not
607 * support the Read Page Scan Type command. Check support for
608 * this command in the bit mask of supported commands.
610 if (hdev
->commands
[13] & 0x01)
611 hci_req_add(req
, HCI_OP_READ_PAGE_SCAN_TYPE
, 0, NULL
);
613 if (lmp_le_capable(hdev
)) {
616 memset(events
, 0, sizeof(events
));
618 if (hdev
->le_features
[0] & HCI_LE_ENCRYPTION
)
619 events
[0] |= 0x10; /* LE Long Term Key Request */
621 /* If controller supports the Connection Parameters Request
622 * Link Layer Procedure, enable the corresponding event.
624 if (hdev
->le_features
[0] & HCI_LE_CONN_PARAM_REQ_PROC
)
625 events
[0] |= 0x20; /* LE Remote Connection
629 /* If the controller supports the Data Length Extension
630 * feature, enable the corresponding event.
632 if (hdev
->le_features
[0] & HCI_LE_DATA_LEN_EXT
)
633 events
[0] |= 0x40; /* LE Data Length Change */
635 /* If the controller supports Extended Scanner Filter
636 * Policies, enable the correspondig event.
638 if (hdev
->le_features
[0] & HCI_LE_EXT_SCAN_POLICY
)
639 events
[1] |= 0x04; /* LE Direct Advertising
643 /* If the controller supports Channel Selection Algorithm #2
644 * feature, enable the corresponding event.
646 if (hdev
->le_features
[1] & HCI_LE_CHAN_SEL_ALG2
)
647 events
[2] |= 0x08; /* LE Channel Selection
651 /* If the controller supports the LE Set Scan Enable command,
652 * enable the corresponding advertising report event.
654 if (hdev
->commands
[26] & 0x08)
655 events
[0] |= 0x02; /* LE Advertising Report */
657 /* If the controller supports the LE Create Connection
658 * command, enable the corresponding event.
660 if (hdev
->commands
[26] & 0x10)
661 events
[0] |= 0x01; /* LE Connection Complete */
663 /* If the controller supports the LE Connection Update
664 * command, enable the corresponding event.
666 if (hdev
->commands
[27] & 0x04)
667 events
[0] |= 0x04; /* LE Connection Update
671 /* If the controller supports the LE Read Remote Used Features
672 * command, enable the corresponding event.
674 if (hdev
->commands
[27] & 0x20)
675 events
[0] |= 0x08; /* LE Read Remote Used
679 /* If the controller supports the LE Read Local P-256
680 * Public Key command, enable the corresponding event.
682 if (hdev
->commands
[34] & 0x02)
683 events
[0] |= 0x80; /* LE Read Local P-256
684 * Public Key Complete
687 /* If the controller supports the LE Generate DHKey
688 * command, enable the corresponding event.
690 if (hdev
->commands
[34] & 0x04)
691 events
[1] |= 0x01; /* LE Generate DHKey Complete */
693 /* If the controller supports the LE Set Default PHY or
694 * LE Set PHY commands, enable the corresponding event.
696 if (hdev
->commands
[35] & (0x20 | 0x40))
697 events
[1] |= 0x08; /* LE PHY Update Complete */
699 /* If the controller supports LE Set Extended Scan Parameters
700 * and LE Set Extended Scan Enable commands, enable the
701 * corresponding event.
703 if (use_ext_scan(hdev
))
704 events
[1] |= 0x10; /* LE Extended Advertising
708 /* If the controller supports the LE Extended Create Connection
709 * command, enable the corresponding event.
711 if (use_ext_conn(hdev
))
712 events
[1] |= 0x02; /* LE Enhanced Connection
716 /* If the controller supports the LE Extended Advertising
717 * command, enable the corresponding event.
719 if (ext_adv_capable(hdev
))
720 events
[2] |= 0x02; /* LE Advertising Set
724 hci_req_add(req
, HCI_OP_LE_SET_EVENT_MASK
, sizeof(events
),
727 /* Read LE Advertising Channel TX Power */
728 if ((hdev
->commands
[25] & 0x40) && !ext_adv_capable(hdev
)) {
729 /* HCI TS spec forbids mixing of legacy and extended
730 * advertising commands wherein READ_ADV_TX_POWER is
731 * also included. So do not call it if extended adv
732 * is supported otherwise controller will return
733 * COMMAND_DISALLOWED for extended commands.
735 hci_req_add(req
, HCI_OP_LE_READ_ADV_TX_POWER
, 0, NULL
);
738 if (hdev
->commands
[26] & 0x40) {
739 /* Read LE White List Size */
740 hci_req_add(req
, HCI_OP_LE_READ_WHITE_LIST_SIZE
,
744 if (hdev
->commands
[26] & 0x80) {
745 /* Clear LE White List */
746 hci_req_add(req
, HCI_OP_LE_CLEAR_WHITE_LIST
, 0, NULL
);
749 if (hdev
->commands
[34] & 0x40) {
750 /* Read LE Resolving List Size */
751 hci_req_add(req
, HCI_OP_LE_READ_RESOLV_LIST_SIZE
,
755 if (hdev
->commands
[34] & 0x20) {
756 /* Clear LE Resolving List */
757 hci_req_add(req
, HCI_OP_LE_CLEAR_RESOLV_LIST
, 0, NULL
);
760 if (hdev
->le_features
[0] & HCI_LE_DATA_LEN_EXT
) {
761 /* Read LE Maximum Data Length */
762 hci_req_add(req
, HCI_OP_LE_READ_MAX_DATA_LEN
, 0, NULL
);
764 /* Read LE Suggested Default Data Length */
765 hci_req_add(req
, HCI_OP_LE_READ_DEF_DATA_LEN
, 0, NULL
);
768 if (ext_adv_capable(hdev
)) {
769 /* Read LE Number of Supported Advertising Sets */
770 hci_req_add(req
, HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS
,
774 hci_set_le_support(req
);
777 /* Read features beyond page 1 if available */
778 for (p
= 2; p
< HCI_MAX_PAGES
&& p
<= hdev
->max_page
; p
++) {
779 struct hci_cp_read_local_ext_features cp
;
782 hci_req_add(req
, HCI_OP_READ_LOCAL_EXT_FEATURES
,
789 static int hci_init4_req(struct hci_request
*req
, unsigned long opt
)
791 struct hci_dev
*hdev
= req
->hdev
;
793 /* Some Broadcom based Bluetooth controllers do not support the
794 * Delete Stored Link Key command. They are clearly indicating its
795 * absence in the bit mask of supported commands.
797 * Check the supported commands and only if the the command is marked
798 * as supported send it. If not supported assume that the controller
799 * does not have actual support for stored link keys which makes this
800 * command redundant anyway.
802 * Some controllers indicate that they support handling deleting
803 * stored link keys, but they don't. The quirk lets a driver
804 * just disable this command.
806 if (hdev
->commands
[6] & 0x80 &&
807 !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
)) {
808 struct hci_cp_delete_stored_link_key cp
;
810 bacpy(&cp
.bdaddr
, BDADDR_ANY
);
811 cp
.delete_all
= 0x01;
812 hci_req_add(req
, HCI_OP_DELETE_STORED_LINK_KEY
,
816 /* Set event mask page 2 if the HCI command for it is supported */
817 if (hdev
->commands
[22] & 0x04)
818 hci_set_event_mask_page_2(req
);
820 /* Read local codec list if the HCI command is supported */
821 if (hdev
->commands
[29] & 0x20)
822 hci_req_add(req
, HCI_OP_READ_LOCAL_CODECS
, 0, NULL
);
824 /* Get MWS transport configuration if the HCI command is supported */
825 if (hdev
->commands
[30] & 0x08)
826 hci_req_add(req
, HCI_OP_GET_MWS_TRANSPORT_CONFIG
, 0, NULL
);
828 /* Check for Synchronization Train support */
829 if (lmp_sync_train_capable(hdev
))
830 hci_req_add(req
, HCI_OP_READ_SYNC_TRAIN_PARAMS
, 0, NULL
);
832 /* Enable Secure Connections if supported and configured */
833 if (hci_dev_test_flag(hdev
, HCI_SSP_ENABLED
) &&
834 bredr_sc_enabled(hdev
)) {
837 hci_req_add(req
, HCI_OP_WRITE_SC_SUPPORT
,
838 sizeof(support
), &support
);
841 /* Set Suggested Default Data Length to maximum if supported */
842 if (hdev
->le_features
[0] & HCI_LE_DATA_LEN_EXT
) {
843 struct hci_cp_le_write_def_data_len cp
;
845 cp
.tx_len
= hdev
->le_max_tx_len
;
846 cp
.tx_time
= hdev
->le_max_tx_time
;
847 hci_req_add(req
, HCI_OP_LE_WRITE_DEF_DATA_LEN
, sizeof(cp
), &cp
);
850 /* Set Default PHY parameters if command is supported */
851 if (hdev
->commands
[35] & 0x20) {
852 struct hci_cp_le_set_default_phy cp
;
855 cp
.tx_phys
= hdev
->le_tx_def_phys
;
856 cp
.rx_phys
= hdev
->le_rx_def_phys
;
858 hci_req_add(req
, HCI_OP_LE_SET_DEFAULT_PHY
, sizeof(cp
), &cp
);
864 static int __hci_init(struct hci_dev
*hdev
)
868 err
= __hci_req_sync(hdev
, hci_init1_req
, 0, HCI_INIT_TIMEOUT
, NULL
);
872 if (hci_dev_test_flag(hdev
, HCI_SETUP
))
873 hci_debugfs_create_basic(hdev
);
875 err
= __hci_req_sync(hdev
, hci_init2_req
, 0, HCI_INIT_TIMEOUT
, NULL
);
879 /* HCI_PRIMARY covers both single-mode LE, BR/EDR and dual-mode
880 * BR/EDR/LE type controllers. AMP controllers only need the
881 * first two stages of init.
883 if (hdev
->dev_type
!= HCI_PRIMARY
)
886 err
= __hci_req_sync(hdev
, hci_init3_req
, 0, HCI_INIT_TIMEOUT
, NULL
);
890 err
= __hci_req_sync(hdev
, hci_init4_req
, 0, HCI_INIT_TIMEOUT
, NULL
);
894 /* This function is only called when the controller is actually in
895 * configured state. When the controller is marked as unconfigured,
896 * this initialization procedure is not run.
898 * It means that it is possible that a controller runs through its
899 * setup phase and then discovers missing settings. If that is the
900 * case, then this function will not be called. It then will only
901 * be called during the config phase.
903 * So only when in setup phase or config phase, create the debugfs
904 * entries and register the SMP channels.
906 if (!hci_dev_test_flag(hdev
, HCI_SETUP
) &&
907 !hci_dev_test_flag(hdev
, HCI_CONFIG
))
910 hci_debugfs_create_common(hdev
);
912 if (lmp_bredr_capable(hdev
))
913 hci_debugfs_create_bredr(hdev
);
915 if (lmp_le_capable(hdev
))
916 hci_debugfs_create_le(hdev
);
921 static int hci_init0_req(struct hci_request
*req
, unsigned long opt
)
923 struct hci_dev
*hdev
= req
->hdev
;
925 BT_DBG("%s %ld", hdev
->name
, opt
);
928 if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
))
929 hci_reset_req(req
, 0);
931 /* Read Local Version */
932 hci_req_add(req
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
);
934 /* Read BD Address */
935 if (hdev
->set_bdaddr
)
936 hci_req_add(req
, HCI_OP_READ_BD_ADDR
, 0, NULL
);
941 static int __hci_unconf_init(struct hci_dev
*hdev
)
945 if (test_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
))
948 err
= __hci_req_sync(hdev
, hci_init0_req
, 0, HCI_INIT_TIMEOUT
, NULL
);
952 if (hci_dev_test_flag(hdev
, HCI_SETUP
))
953 hci_debugfs_create_basic(hdev
);
958 static int hci_scan_req(struct hci_request
*req
, unsigned long opt
)
962 BT_DBG("%s %x", req
->hdev
->name
, scan
);
964 /* Inquiry and Page scans */
965 hci_req_add(req
, HCI_OP_WRITE_SCAN_ENABLE
, 1, &scan
);
969 static int hci_auth_req(struct hci_request
*req
, unsigned long opt
)
973 BT_DBG("%s %x", req
->hdev
->name
, auth
);
976 hci_req_add(req
, HCI_OP_WRITE_AUTH_ENABLE
, 1, &auth
);
980 static int hci_encrypt_req(struct hci_request
*req
, unsigned long opt
)
984 BT_DBG("%s %x", req
->hdev
->name
, encrypt
);
987 hci_req_add(req
, HCI_OP_WRITE_ENCRYPT_MODE
, 1, &encrypt
);
991 static int hci_linkpol_req(struct hci_request
*req
, unsigned long opt
)
993 __le16 policy
= cpu_to_le16(opt
);
995 BT_DBG("%s %x", req
->hdev
->name
, policy
);
997 /* Default link policy */
998 hci_req_add(req
, HCI_OP_WRITE_DEF_LINK_POLICY
, 2, &policy
);
1002 /* Get HCI device by index.
1003 * Device is held on return. */
1004 struct hci_dev
*hci_dev_get(int index
)
1006 struct hci_dev
*hdev
= NULL
, *d
;
1008 BT_DBG("%d", index
);
1013 read_lock(&hci_dev_list_lock
);
1014 list_for_each_entry(d
, &hci_dev_list
, list
) {
1015 if (d
->id
== index
) {
1016 hdev
= hci_dev_hold(d
);
1020 read_unlock(&hci_dev_list_lock
);
1024 /* ---- Inquiry support ---- */
1026 bool hci_discovery_active(struct hci_dev
*hdev
)
1028 struct discovery_state
*discov
= &hdev
->discovery
;
1030 switch (discov
->state
) {
1031 case DISCOVERY_FINDING
:
1032 case DISCOVERY_RESOLVING
:
1040 void hci_discovery_set_state(struct hci_dev
*hdev
, int state
)
1042 int old_state
= hdev
->discovery
.state
;
1044 BT_DBG("%s state %u -> %u", hdev
->name
, hdev
->discovery
.state
, state
);
1046 if (old_state
== state
)
1049 hdev
->discovery
.state
= state
;
1052 case DISCOVERY_STOPPED
:
1053 hci_update_background_scan(hdev
);
1055 if (old_state
!= DISCOVERY_STARTING
)
1056 mgmt_discovering(hdev
, 0);
1058 case DISCOVERY_STARTING
:
1060 case DISCOVERY_FINDING
:
1061 mgmt_discovering(hdev
, 1);
1063 case DISCOVERY_RESOLVING
:
1065 case DISCOVERY_STOPPING
:
1070 void hci_inquiry_cache_flush(struct hci_dev
*hdev
)
1072 struct discovery_state
*cache
= &hdev
->discovery
;
1073 struct inquiry_entry
*p
, *n
;
1075 list_for_each_entry_safe(p
, n
, &cache
->all
, all
) {
1080 INIT_LIST_HEAD(&cache
->unknown
);
1081 INIT_LIST_HEAD(&cache
->resolve
);
1084 struct inquiry_entry
*hci_inquiry_cache_lookup(struct hci_dev
*hdev
,
1087 struct discovery_state
*cache
= &hdev
->discovery
;
1088 struct inquiry_entry
*e
;
1090 BT_DBG("cache %p, %pMR", cache
, bdaddr
);
1092 list_for_each_entry(e
, &cache
->all
, all
) {
1093 if (!bacmp(&e
->data
.bdaddr
, bdaddr
))
1100 struct inquiry_entry
*hci_inquiry_cache_lookup_unknown(struct hci_dev
*hdev
,
1103 struct discovery_state
*cache
= &hdev
->discovery
;
1104 struct inquiry_entry
*e
;
1106 BT_DBG("cache %p, %pMR", cache
, bdaddr
);
1108 list_for_each_entry(e
, &cache
->unknown
, list
) {
1109 if (!bacmp(&e
->data
.bdaddr
, bdaddr
))
1116 struct inquiry_entry
*hci_inquiry_cache_lookup_resolve(struct hci_dev
*hdev
,
1120 struct discovery_state
*cache
= &hdev
->discovery
;
1121 struct inquiry_entry
*e
;
1123 BT_DBG("cache %p bdaddr %pMR state %d", cache
, bdaddr
, state
);
1125 list_for_each_entry(e
, &cache
->resolve
, list
) {
1126 if (!bacmp(bdaddr
, BDADDR_ANY
) && e
->name_state
== state
)
1128 if (!bacmp(&e
->data
.bdaddr
, bdaddr
))
1135 void hci_inquiry_cache_update_resolve(struct hci_dev
*hdev
,
1136 struct inquiry_entry
*ie
)
1138 struct discovery_state
*cache
= &hdev
->discovery
;
1139 struct list_head
*pos
= &cache
->resolve
;
1140 struct inquiry_entry
*p
;
1142 list_del(&ie
->list
);
1144 list_for_each_entry(p
, &cache
->resolve
, list
) {
1145 if (p
->name_state
!= NAME_PENDING
&&
1146 abs(p
->data
.rssi
) >= abs(ie
->data
.rssi
))
1151 list_add(&ie
->list
, pos
);
1154 u32
hci_inquiry_cache_update(struct hci_dev
*hdev
, struct inquiry_data
*data
,
1157 struct discovery_state
*cache
= &hdev
->discovery
;
1158 struct inquiry_entry
*ie
;
1161 BT_DBG("cache %p, %pMR", cache
, &data
->bdaddr
);
1163 hci_remove_remote_oob_data(hdev
, &data
->bdaddr
, BDADDR_BREDR
);
1165 if (!data
->ssp_mode
)
1166 flags
|= MGMT_DEV_FOUND_LEGACY_PAIRING
;
1168 ie
= hci_inquiry_cache_lookup(hdev
, &data
->bdaddr
);
1170 if (!ie
->data
.ssp_mode
)
1171 flags
|= MGMT_DEV_FOUND_LEGACY_PAIRING
;
1173 if (ie
->name_state
== NAME_NEEDED
&&
1174 data
->rssi
!= ie
->data
.rssi
) {
1175 ie
->data
.rssi
= data
->rssi
;
1176 hci_inquiry_cache_update_resolve(hdev
, ie
);
1182 /* Entry not in the cache. Add new one. */
1183 ie
= kzalloc(sizeof(*ie
), GFP_KERNEL
);
1185 flags
|= MGMT_DEV_FOUND_CONFIRM_NAME
;
1189 list_add(&ie
->all
, &cache
->all
);
1192 ie
->name_state
= NAME_KNOWN
;
1194 ie
->name_state
= NAME_NOT_KNOWN
;
1195 list_add(&ie
->list
, &cache
->unknown
);
1199 if (name_known
&& ie
->name_state
!= NAME_KNOWN
&&
1200 ie
->name_state
!= NAME_PENDING
) {
1201 ie
->name_state
= NAME_KNOWN
;
1202 list_del(&ie
->list
);
1205 memcpy(&ie
->data
, data
, sizeof(*data
));
1206 ie
->timestamp
= jiffies
;
1207 cache
->timestamp
= jiffies
;
1209 if (ie
->name_state
== NAME_NOT_KNOWN
)
1210 flags
|= MGMT_DEV_FOUND_CONFIRM_NAME
;
1216 static int inquiry_cache_dump(struct hci_dev
*hdev
, int num
, __u8
*buf
)
1218 struct discovery_state
*cache
= &hdev
->discovery
;
1219 struct inquiry_info
*info
= (struct inquiry_info
*) buf
;
1220 struct inquiry_entry
*e
;
1223 list_for_each_entry(e
, &cache
->all
, all
) {
1224 struct inquiry_data
*data
= &e
->data
;
1229 bacpy(&info
->bdaddr
, &data
->bdaddr
);
1230 info
->pscan_rep_mode
= data
->pscan_rep_mode
;
1231 info
->pscan_period_mode
= data
->pscan_period_mode
;
1232 info
->pscan_mode
= data
->pscan_mode
;
1233 memcpy(info
->dev_class
, data
->dev_class
, 3);
1234 info
->clock_offset
= data
->clock_offset
;
1240 BT_DBG("cache %p, copied %d", cache
, copied
);
1244 static int hci_inq_req(struct hci_request
*req
, unsigned long opt
)
1246 struct hci_inquiry_req
*ir
= (struct hci_inquiry_req
*) opt
;
1247 struct hci_dev
*hdev
= req
->hdev
;
1248 struct hci_cp_inquiry cp
;
1250 BT_DBG("%s", hdev
->name
);
1252 if (test_bit(HCI_INQUIRY
, &hdev
->flags
))
1256 memcpy(&cp
.lap
, &ir
->lap
, 3);
1257 cp
.length
= ir
->length
;
1258 cp
.num_rsp
= ir
->num_rsp
;
1259 hci_req_add(req
, HCI_OP_INQUIRY
, sizeof(cp
), &cp
);
1264 int hci_inquiry(void __user
*arg
)
1266 __u8 __user
*ptr
= arg
;
1267 struct hci_inquiry_req ir
;
1268 struct hci_dev
*hdev
;
1269 int err
= 0, do_inquiry
= 0, max_rsp
;
1273 if (copy_from_user(&ir
, ptr
, sizeof(ir
)))
1276 hdev
= hci_dev_get(ir
.dev_id
);
1280 if (hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
1285 if (hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
)) {
1290 if (hdev
->dev_type
!= HCI_PRIMARY
) {
1295 if (!hci_dev_test_flag(hdev
, HCI_BREDR_ENABLED
)) {
1301 if (inquiry_cache_age(hdev
) > INQUIRY_CACHE_AGE_MAX
||
1302 inquiry_cache_empty(hdev
) || ir
.flags
& IREQ_CACHE_FLUSH
) {
1303 hci_inquiry_cache_flush(hdev
);
1306 hci_dev_unlock(hdev
);
1308 timeo
= ir
.length
* msecs_to_jiffies(2000);
1311 err
= hci_req_sync(hdev
, hci_inq_req
, (unsigned long) &ir
,
1316 /* Wait until Inquiry procedure finishes (HCI_INQUIRY flag is
1317 * cleared). If it is interrupted by a signal, return -EINTR.
1319 if (wait_on_bit(&hdev
->flags
, HCI_INQUIRY
,
1320 TASK_INTERRUPTIBLE
))
1324 /* for unlimited number of responses we will use buffer with
1327 max_rsp
= (ir
.num_rsp
== 0) ? 255 : ir
.num_rsp
;
1329 /* cache_dump can't sleep. Therefore we allocate temp buffer and then
1330 * copy it to the user space.
1332 buf
= kmalloc_array(max_rsp
, sizeof(struct inquiry_info
), GFP_KERNEL
);
1339 ir
.num_rsp
= inquiry_cache_dump(hdev
, max_rsp
, buf
);
1340 hci_dev_unlock(hdev
);
1342 BT_DBG("num_rsp %d", ir
.num_rsp
);
1344 if (!copy_to_user(ptr
, &ir
, sizeof(ir
))) {
1346 if (copy_to_user(ptr
, buf
, sizeof(struct inquiry_info
) *
1360 * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address
1361 * (BD_ADDR) for a HCI device from
1362 * a firmware node property.
1363 * @hdev: The HCI device
1365 * Search the firmware node for 'local-bd-address'.
1367 * All-zero BD addresses are rejected, because those could be properties
1368 * that exist in the firmware tables, but were not updated by the firmware. For
1369 * example, the DTS could define 'local-bd-address', with zero BD addresses.
1371 static void hci_dev_get_bd_addr_from_property(struct hci_dev
*hdev
)
1373 struct fwnode_handle
*fwnode
= dev_fwnode(hdev
->dev
.parent
);
1377 ret
= fwnode_property_read_u8_array(fwnode
, "local-bd-address",
1378 (u8
*)&ba
, sizeof(ba
));
1379 if (ret
< 0 || !bacmp(&ba
, BDADDR_ANY
))
1382 bacpy(&hdev
->public_addr
, &ba
);
1385 static int hci_dev_do_open(struct hci_dev
*hdev
)
1389 BT_DBG("%s %p", hdev
->name
, hdev
);
1391 hci_req_sync_lock(hdev
);
1393 if (hci_dev_test_flag(hdev
, HCI_UNREGISTER
)) {
1398 if (!hci_dev_test_flag(hdev
, HCI_SETUP
) &&
1399 !hci_dev_test_flag(hdev
, HCI_CONFIG
)) {
1400 /* Check for rfkill but allow the HCI setup stage to
1401 * proceed (which in itself doesn't cause any RF activity).
1403 if (hci_dev_test_flag(hdev
, HCI_RFKILLED
)) {
1408 /* Check for valid public address or a configured static
1409 * random adddress, but let the HCI setup proceed to
1410 * be able to determine if there is a public address
1413 * In case of user channel usage, it is not important
1414 * if a public address or static random address is
1417 * This check is only valid for BR/EDR controllers
1418 * since AMP controllers do not have an address.
1420 if (!hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
) &&
1421 hdev
->dev_type
== HCI_PRIMARY
&&
1422 !bacmp(&hdev
->bdaddr
, BDADDR_ANY
) &&
1423 !bacmp(&hdev
->static_addr
, BDADDR_ANY
)) {
1424 ret
= -EADDRNOTAVAIL
;
1429 if (test_bit(HCI_UP
, &hdev
->flags
)) {
1434 if (hdev
->open(hdev
)) {
1439 set_bit(HCI_RUNNING
, &hdev
->flags
);
1440 hci_sock_dev_event(hdev
, HCI_DEV_OPEN
);
1442 atomic_set(&hdev
->cmd_cnt
, 1);
1443 set_bit(HCI_INIT
, &hdev
->flags
);
1445 if (hci_dev_test_flag(hdev
, HCI_SETUP
) ||
1446 test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP
, &hdev
->quirks
)) {
1447 hci_sock_dev_event(hdev
, HCI_DEV_SETUP
);
1450 ret
= hdev
->setup(hdev
);
1455 if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY
, &hdev
->quirks
)) {
1456 if (!bacmp(&hdev
->public_addr
, BDADDR_ANY
))
1457 hci_dev_get_bd_addr_from_property(hdev
);
1459 if (bacmp(&hdev
->public_addr
, BDADDR_ANY
) &&
1461 ret
= hdev
->set_bdaddr(hdev
,
1462 &hdev
->public_addr
);
1466 /* The transport driver can set these quirks before
1467 * creating the HCI device or in its setup callback.
1469 * In case any of them is set, the controller has to
1470 * start up as unconfigured.
1472 if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG
, &hdev
->quirks
) ||
1473 test_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
))
1474 hci_dev_set_flag(hdev
, HCI_UNCONFIGURED
);
1476 /* For an unconfigured controller it is required to
1477 * read at least the version information provided by
1478 * the Read Local Version Information command.
1480 * If the set_bdaddr driver callback is provided, then
1481 * also the original Bluetooth public device address
1482 * will be read using the Read BD Address command.
1484 if (hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
))
1485 ret
= __hci_unconf_init(hdev
);
1488 if (hci_dev_test_flag(hdev
, HCI_CONFIG
)) {
1489 /* If public address change is configured, ensure that
1490 * the address gets programmed. If the driver does not
1491 * support changing the public address, fail the power
1494 if (bacmp(&hdev
->public_addr
, BDADDR_ANY
) &&
1496 ret
= hdev
->set_bdaddr(hdev
, &hdev
->public_addr
);
1498 ret
= -EADDRNOTAVAIL
;
1502 if (!hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
) &&
1503 !hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
1504 ret
= __hci_init(hdev
);
1505 if (!ret
&& hdev
->post_init
)
1506 ret
= hdev
->post_init(hdev
);
1510 /* If the HCI Reset command is clearing all diagnostic settings,
1511 * then they need to be reprogrammed after the init procedure
1514 if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
) &&
1515 !hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
) &&
1516 hci_dev_test_flag(hdev
, HCI_VENDOR_DIAG
) && hdev
->set_diag
)
1517 ret
= hdev
->set_diag(hdev
, true);
1519 clear_bit(HCI_INIT
, &hdev
->flags
);
1523 hci_dev_set_flag(hdev
, HCI_RPA_EXPIRED
);
1524 hci_adv_instances_set_rpa_expired(hdev
, true);
1525 set_bit(HCI_UP
, &hdev
->flags
);
1526 hci_sock_dev_event(hdev
, HCI_DEV_UP
);
1527 hci_leds_update_powered(hdev
, true);
1528 if (!hci_dev_test_flag(hdev
, HCI_SETUP
) &&
1529 !hci_dev_test_flag(hdev
, HCI_CONFIG
) &&
1530 !hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
) &&
1531 !hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
) &&
1532 hci_dev_test_flag(hdev
, HCI_MGMT
) &&
1533 hdev
->dev_type
== HCI_PRIMARY
) {
1534 ret
= __hci_req_hci_power_on(hdev
);
1535 mgmt_power_on(hdev
, ret
);
1538 /* Init failed, cleanup */
1539 flush_work(&hdev
->tx_work
);
1540 flush_work(&hdev
->cmd_work
);
1541 flush_work(&hdev
->rx_work
);
1543 skb_queue_purge(&hdev
->cmd_q
);
1544 skb_queue_purge(&hdev
->rx_q
);
1549 if (hdev
->sent_cmd
) {
1550 kfree_skb(hdev
->sent_cmd
);
1551 hdev
->sent_cmd
= NULL
;
1554 clear_bit(HCI_RUNNING
, &hdev
->flags
);
1555 hci_sock_dev_event(hdev
, HCI_DEV_CLOSE
);
1558 hdev
->flags
&= BIT(HCI_RAW
);
1562 hci_req_sync_unlock(hdev
);
1566 /* ---- HCI ioctl helpers ---- */
1568 int hci_dev_open(__u16 dev
)
1570 struct hci_dev
*hdev
;
1573 hdev
= hci_dev_get(dev
);
1577 /* Devices that are marked as unconfigured can only be powered
1578 * up as user channel. Trying to bring them up as normal devices
1579 * will result into a failure. Only user channel operation is
1582 * When this function is called for a user channel, the flag
1583 * HCI_USER_CHANNEL will be set first before attempting to
1586 if (hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
) &&
1587 !hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
1592 /* We need to ensure that no other power on/off work is pending
1593 * before proceeding to call hci_dev_do_open. This is
1594 * particularly important if the setup procedure has not yet
1597 if (hci_dev_test_and_clear_flag(hdev
, HCI_AUTO_OFF
))
1598 cancel_delayed_work(&hdev
->power_off
);
1600 /* After this call it is guaranteed that the setup procedure
1601 * has finished. This means that error conditions like RFKILL
1602 * or no valid public or static random address apply.
1604 flush_workqueue(hdev
->req_workqueue
);
1606 /* For controllers not using the management interface and that
1607 * are brought up using legacy ioctl, set the HCI_BONDABLE bit
1608 * so that pairing works for them. Once the management interface
1609 * is in use this bit will be cleared again and userspace has
1610 * to explicitly enable it.
1612 if (!hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
) &&
1613 !hci_dev_test_flag(hdev
, HCI_MGMT
))
1614 hci_dev_set_flag(hdev
, HCI_BONDABLE
);
1616 err
= hci_dev_do_open(hdev
);
1623 /* This function requires the caller holds hdev->lock */
1624 static void hci_pend_le_actions_clear(struct hci_dev
*hdev
)
1626 struct hci_conn_params
*p
;
1628 list_for_each_entry(p
, &hdev
->le_conn_params
, list
) {
1630 hci_conn_drop(p
->conn
);
1631 hci_conn_put(p
->conn
);
1634 list_del_init(&p
->action
);
1637 BT_DBG("All LE pending actions cleared");
1640 int hci_dev_do_close(struct hci_dev
*hdev
)
1644 BT_DBG("%s %p", hdev
->name
, hdev
);
1646 if (!hci_dev_test_flag(hdev
, HCI_UNREGISTER
) &&
1647 !hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
) &&
1648 test_bit(HCI_UP
, &hdev
->flags
)) {
1649 /* Execute vendor specific shutdown routine */
1651 hdev
->shutdown(hdev
);
1654 cancel_delayed_work(&hdev
->power_off
);
1656 hci_request_cancel_all(hdev
);
1657 hci_req_sync_lock(hdev
);
1659 if (!test_and_clear_bit(HCI_UP
, &hdev
->flags
)) {
1660 cancel_delayed_work_sync(&hdev
->cmd_timer
);
1661 hci_req_sync_unlock(hdev
);
1665 hci_leds_update_powered(hdev
, false);
1667 /* Flush RX and TX works */
1668 flush_work(&hdev
->tx_work
);
1669 flush_work(&hdev
->rx_work
);
1671 if (hdev
->discov_timeout
> 0) {
1672 hdev
->discov_timeout
= 0;
1673 hci_dev_clear_flag(hdev
, HCI_DISCOVERABLE
);
1674 hci_dev_clear_flag(hdev
, HCI_LIMITED_DISCOVERABLE
);
1677 if (hci_dev_test_and_clear_flag(hdev
, HCI_SERVICE_CACHE
))
1678 cancel_delayed_work(&hdev
->service_cache
);
1680 if (hci_dev_test_flag(hdev
, HCI_MGMT
)) {
1681 struct adv_info
*adv_instance
;
1683 cancel_delayed_work_sync(&hdev
->rpa_expired
);
1685 list_for_each_entry(adv_instance
, &hdev
->adv_instances
, list
)
1686 cancel_delayed_work_sync(&adv_instance
->rpa_expired_cb
);
1689 /* Avoid potential lockdep warnings from the *_flush() calls by
1690 * ensuring the workqueue is empty up front.
1692 drain_workqueue(hdev
->workqueue
);
1696 hci_discovery_set_state(hdev
, DISCOVERY_STOPPED
);
1698 auto_off
= hci_dev_test_and_clear_flag(hdev
, HCI_AUTO_OFF
);
1700 if (!auto_off
&& hdev
->dev_type
== HCI_PRIMARY
&&
1701 !hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
) &&
1702 hci_dev_test_flag(hdev
, HCI_MGMT
))
1703 __mgmt_power_off(hdev
);
1705 hci_inquiry_cache_flush(hdev
);
1706 hci_pend_le_actions_clear(hdev
);
1707 hci_conn_hash_flush(hdev
);
1708 hci_dev_unlock(hdev
);
1710 smp_unregister(hdev
);
1712 hci_sock_dev_event(hdev
, HCI_DEV_DOWN
);
1718 skb_queue_purge(&hdev
->cmd_q
);
1719 atomic_set(&hdev
->cmd_cnt
, 1);
1720 if (test_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
) &&
1721 !auto_off
&& !hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
)) {
1722 set_bit(HCI_INIT
, &hdev
->flags
);
1723 __hci_req_sync(hdev
, hci_reset_req
, 0, HCI_CMD_TIMEOUT
, NULL
);
1724 clear_bit(HCI_INIT
, &hdev
->flags
);
1727 /* flush cmd work */
1728 flush_work(&hdev
->cmd_work
);
1731 skb_queue_purge(&hdev
->rx_q
);
1732 skb_queue_purge(&hdev
->cmd_q
);
1733 skb_queue_purge(&hdev
->raw_q
);
1735 /* Drop last sent command */
1736 if (hdev
->sent_cmd
) {
1737 cancel_delayed_work_sync(&hdev
->cmd_timer
);
1738 kfree_skb(hdev
->sent_cmd
);
1739 hdev
->sent_cmd
= NULL
;
1742 clear_bit(HCI_RUNNING
, &hdev
->flags
);
1743 hci_sock_dev_event(hdev
, HCI_DEV_CLOSE
);
1745 /* After this point our queues are empty
1746 * and no tasks are scheduled. */
1750 hdev
->flags
&= BIT(HCI_RAW
);
1751 hci_dev_clear_volatile_flags(hdev
);
1753 /* Controller radio is available but is currently powered down */
1754 hdev
->amp_status
= AMP_STATUS_POWERED_DOWN
;
1756 memset(hdev
->eir
, 0, sizeof(hdev
->eir
));
1757 memset(hdev
->dev_class
, 0, sizeof(hdev
->dev_class
));
1758 bacpy(&hdev
->random_addr
, BDADDR_ANY
);
1760 hci_req_sync_unlock(hdev
);
1766 int hci_dev_close(__u16 dev
)
1768 struct hci_dev
*hdev
;
1771 hdev
= hci_dev_get(dev
);
1775 if (hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
1780 if (hci_dev_test_and_clear_flag(hdev
, HCI_AUTO_OFF
))
1781 cancel_delayed_work(&hdev
->power_off
);
1783 err
= hci_dev_do_close(hdev
);
1790 static int hci_dev_do_reset(struct hci_dev
*hdev
)
1794 BT_DBG("%s %p", hdev
->name
, hdev
);
1796 hci_req_sync_lock(hdev
);
1799 skb_queue_purge(&hdev
->rx_q
);
1800 skb_queue_purge(&hdev
->cmd_q
);
1802 /* Avoid potential lockdep warnings from the *_flush() calls by
1803 * ensuring the workqueue is empty up front.
1805 drain_workqueue(hdev
->workqueue
);
1808 hci_inquiry_cache_flush(hdev
);
1809 hci_conn_hash_flush(hdev
);
1810 hci_dev_unlock(hdev
);
1815 atomic_set(&hdev
->cmd_cnt
, 1);
1816 hdev
->acl_cnt
= 0; hdev
->sco_cnt
= 0; hdev
->le_cnt
= 0;
1818 ret
= __hci_req_sync(hdev
, hci_reset_req
, 0, HCI_INIT_TIMEOUT
, NULL
);
1820 hci_req_sync_unlock(hdev
);
1824 int hci_dev_reset(__u16 dev
)
1826 struct hci_dev
*hdev
;
1829 hdev
= hci_dev_get(dev
);
1833 if (!test_bit(HCI_UP
, &hdev
->flags
)) {
1838 if (hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
1843 if (hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
)) {
1848 err
= hci_dev_do_reset(hdev
);
1855 int hci_dev_reset_stat(__u16 dev
)
1857 struct hci_dev
*hdev
;
1860 hdev
= hci_dev_get(dev
);
1864 if (hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
1869 if (hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
)) {
1874 memset(&hdev
->stat
, 0, sizeof(struct hci_dev_stats
));
1881 static void hci_update_scan_state(struct hci_dev
*hdev
, u8 scan
)
1883 bool conn_changed
, discov_changed
;
1885 BT_DBG("%s scan 0x%02x", hdev
->name
, scan
);
1887 if ((scan
& SCAN_PAGE
))
1888 conn_changed
= !hci_dev_test_and_set_flag(hdev
,
1891 conn_changed
= hci_dev_test_and_clear_flag(hdev
,
1894 if ((scan
& SCAN_INQUIRY
)) {
1895 discov_changed
= !hci_dev_test_and_set_flag(hdev
,
1898 hci_dev_clear_flag(hdev
, HCI_LIMITED_DISCOVERABLE
);
1899 discov_changed
= hci_dev_test_and_clear_flag(hdev
,
1903 if (!hci_dev_test_flag(hdev
, HCI_MGMT
))
1906 if (conn_changed
|| discov_changed
) {
1907 /* In case this was disabled through mgmt */
1908 hci_dev_set_flag(hdev
, HCI_BREDR_ENABLED
);
1910 if (hci_dev_test_flag(hdev
, HCI_LE_ENABLED
))
1911 hci_req_update_adv_data(hdev
, hdev
->cur_adv_instance
);
1913 mgmt_new_settings(hdev
);
1917 int hci_dev_cmd(unsigned int cmd
, void __user
*arg
)
1919 struct hci_dev
*hdev
;
1920 struct hci_dev_req dr
;
1923 if (copy_from_user(&dr
, arg
, sizeof(dr
)))
1926 hdev
= hci_dev_get(dr
.dev_id
);
1930 if (hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
1935 if (hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
)) {
1940 if (hdev
->dev_type
!= HCI_PRIMARY
) {
1945 if (!hci_dev_test_flag(hdev
, HCI_BREDR_ENABLED
)) {
1952 err
= hci_req_sync(hdev
, hci_auth_req
, dr
.dev_opt
,
1953 HCI_INIT_TIMEOUT
, NULL
);
1957 if (!lmp_encrypt_capable(hdev
)) {
1962 if (!test_bit(HCI_AUTH
, &hdev
->flags
)) {
1963 /* Auth must be enabled first */
1964 err
= hci_req_sync(hdev
, hci_auth_req
, dr
.dev_opt
,
1965 HCI_INIT_TIMEOUT
, NULL
);
1970 err
= hci_req_sync(hdev
, hci_encrypt_req
, dr
.dev_opt
,
1971 HCI_INIT_TIMEOUT
, NULL
);
1975 err
= hci_req_sync(hdev
, hci_scan_req
, dr
.dev_opt
,
1976 HCI_INIT_TIMEOUT
, NULL
);
1978 /* Ensure that the connectable and discoverable states
1979 * get correctly modified as this was a non-mgmt change.
1982 hci_update_scan_state(hdev
, dr
.dev_opt
);
1986 err
= hci_req_sync(hdev
, hci_linkpol_req
, dr
.dev_opt
,
1987 HCI_INIT_TIMEOUT
, NULL
);
1990 case HCISETLINKMODE
:
1991 hdev
->link_mode
= ((__u16
) dr
.dev_opt
) &
1992 (HCI_LM_MASTER
| HCI_LM_ACCEPT
);
1996 if (hdev
->pkt_type
== (__u16
) dr
.dev_opt
)
1999 hdev
->pkt_type
= (__u16
) dr
.dev_opt
;
2000 mgmt_phy_configuration_changed(hdev
, NULL
);
2004 hdev
->acl_mtu
= *((__u16
*) &dr
.dev_opt
+ 1);
2005 hdev
->acl_pkts
= *((__u16
*) &dr
.dev_opt
+ 0);
2009 hdev
->sco_mtu
= *((__u16
*) &dr
.dev_opt
+ 1);
2010 hdev
->sco_pkts
= *((__u16
*) &dr
.dev_opt
+ 0);
2023 int hci_get_dev_list(void __user
*arg
)
2025 struct hci_dev
*hdev
;
2026 struct hci_dev_list_req
*dl
;
2027 struct hci_dev_req
*dr
;
2028 int n
= 0, size
, err
;
2031 if (get_user(dev_num
, (__u16 __user
*) arg
))
2034 if (!dev_num
|| dev_num
> (PAGE_SIZE
* 2) / sizeof(*dr
))
2037 size
= sizeof(*dl
) + dev_num
* sizeof(*dr
);
2039 dl
= kzalloc(size
, GFP_KERNEL
);
2045 read_lock(&hci_dev_list_lock
);
2046 list_for_each_entry(hdev
, &hci_dev_list
, list
) {
2047 unsigned long flags
= hdev
->flags
;
2049 /* When the auto-off is configured it means the transport
2050 * is running, but in that case still indicate that the
2051 * device is actually down.
2053 if (hci_dev_test_flag(hdev
, HCI_AUTO_OFF
))
2054 flags
&= ~BIT(HCI_UP
);
2056 (dr
+ n
)->dev_id
= hdev
->id
;
2057 (dr
+ n
)->dev_opt
= flags
;
2062 read_unlock(&hci_dev_list_lock
);
2065 size
= sizeof(*dl
) + n
* sizeof(*dr
);
2067 err
= copy_to_user(arg
, dl
, size
);
2070 return err
? -EFAULT
: 0;
2073 int hci_get_dev_info(void __user
*arg
)
2075 struct hci_dev
*hdev
;
2076 struct hci_dev_info di
;
2077 unsigned long flags
;
2080 if (copy_from_user(&di
, arg
, sizeof(di
)))
2083 hdev
= hci_dev_get(di
.dev_id
);
2087 /* When the auto-off is configured it means the transport
2088 * is running, but in that case still indicate that the
2089 * device is actually down.
2091 if (hci_dev_test_flag(hdev
, HCI_AUTO_OFF
))
2092 flags
= hdev
->flags
& ~BIT(HCI_UP
);
2094 flags
= hdev
->flags
;
2096 strcpy(di
.name
, hdev
->name
);
2097 di
.bdaddr
= hdev
->bdaddr
;
2098 di
.type
= (hdev
->bus
& 0x0f) | ((hdev
->dev_type
& 0x03) << 4);
2100 di
.pkt_type
= hdev
->pkt_type
;
2101 if (lmp_bredr_capable(hdev
)) {
2102 di
.acl_mtu
= hdev
->acl_mtu
;
2103 di
.acl_pkts
= hdev
->acl_pkts
;
2104 di
.sco_mtu
= hdev
->sco_mtu
;
2105 di
.sco_pkts
= hdev
->sco_pkts
;
2107 di
.acl_mtu
= hdev
->le_mtu
;
2108 di
.acl_pkts
= hdev
->le_pkts
;
2112 di
.link_policy
= hdev
->link_policy
;
2113 di
.link_mode
= hdev
->link_mode
;
2115 memcpy(&di
.stat
, &hdev
->stat
, sizeof(di
.stat
));
2116 memcpy(&di
.features
, &hdev
->features
, sizeof(di
.features
));
2118 if (copy_to_user(arg
, &di
, sizeof(di
)))
2126 /* ---- Interface to HCI drivers ---- */
2128 static int hci_rfkill_set_block(void *data
, bool blocked
)
2130 struct hci_dev
*hdev
= data
;
2132 BT_DBG("%p name %s blocked %d", hdev
, hdev
->name
, blocked
);
2134 if (hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
))
2138 hci_dev_set_flag(hdev
, HCI_RFKILLED
);
2139 if (!hci_dev_test_flag(hdev
, HCI_SETUP
) &&
2140 !hci_dev_test_flag(hdev
, HCI_CONFIG
))
2141 hci_dev_do_close(hdev
);
2143 hci_dev_clear_flag(hdev
, HCI_RFKILLED
);
2149 static const struct rfkill_ops hci_rfkill_ops
= {
2150 .set_block
= hci_rfkill_set_block
,
2153 static void hci_power_on(struct work_struct
*work
)
2155 struct hci_dev
*hdev
= container_of(work
, struct hci_dev
, power_on
);
2158 BT_DBG("%s", hdev
->name
);
2160 if (test_bit(HCI_UP
, &hdev
->flags
) &&
2161 hci_dev_test_flag(hdev
, HCI_MGMT
) &&
2162 hci_dev_test_and_clear_flag(hdev
, HCI_AUTO_OFF
)) {
2163 cancel_delayed_work(&hdev
->power_off
);
2164 hci_req_sync_lock(hdev
);
2165 err
= __hci_req_hci_power_on(hdev
);
2166 hci_req_sync_unlock(hdev
);
2167 mgmt_power_on(hdev
, err
);
2171 err
= hci_dev_do_open(hdev
);
2174 mgmt_set_powered_failed(hdev
, err
);
2175 hci_dev_unlock(hdev
);
2179 /* During the HCI setup phase, a few error conditions are
2180 * ignored and they need to be checked now. If they are still
2181 * valid, it is important to turn the device back off.
2183 if (hci_dev_test_flag(hdev
, HCI_RFKILLED
) ||
2184 hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
) ||
2185 (hdev
->dev_type
== HCI_PRIMARY
&&
2186 !bacmp(&hdev
->bdaddr
, BDADDR_ANY
) &&
2187 !bacmp(&hdev
->static_addr
, BDADDR_ANY
))) {
2188 hci_dev_clear_flag(hdev
, HCI_AUTO_OFF
);
2189 hci_dev_do_close(hdev
);
2190 } else if (hci_dev_test_flag(hdev
, HCI_AUTO_OFF
)) {
2191 queue_delayed_work(hdev
->req_workqueue
, &hdev
->power_off
,
2192 HCI_AUTO_OFF_TIMEOUT
);
2195 if (hci_dev_test_and_clear_flag(hdev
, HCI_SETUP
)) {
2196 /* For unconfigured devices, set the HCI_RAW flag
2197 * so that userspace can easily identify them.
2199 if (hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
))
2200 set_bit(HCI_RAW
, &hdev
->flags
);
2202 /* For fully configured devices, this will send
2203 * the Index Added event. For unconfigured devices,
2204 * it will send Unconfigued Index Added event.
2206 * Devices with HCI_QUIRK_RAW_DEVICE are ignored
2207 * and no event will be send.
2209 mgmt_index_added(hdev
);
2210 } else if (hci_dev_test_and_clear_flag(hdev
, HCI_CONFIG
)) {
2211 /* When the controller is now configured, then it
2212 * is important to clear the HCI_RAW flag.
2214 if (!hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
))
2215 clear_bit(HCI_RAW
, &hdev
->flags
);
2217 /* Powering on the controller with HCI_CONFIG set only
2218 * happens with the transition from unconfigured to
2219 * configured. This will send the Index Added event.
2221 mgmt_index_added(hdev
);
2225 static void hci_power_off(struct work_struct
*work
)
2227 struct hci_dev
*hdev
= container_of(work
, struct hci_dev
,
2230 BT_DBG("%s", hdev
->name
);
2232 hci_dev_do_close(hdev
);
2235 static void hci_error_reset(struct work_struct
*work
)
2237 struct hci_dev
*hdev
= container_of(work
, struct hci_dev
, error_reset
);
2239 BT_DBG("%s", hdev
->name
);
2242 hdev
->hw_error(hdev
, hdev
->hw_error_code
);
2244 bt_dev_err(hdev
, "hardware error 0x%2.2x", hdev
->hw_error_code
);
2246 if (hci_dev_do_close(hdev
))
2249 hci_dev_do_open(hdev
);
2252 void hci_uuids_clear(struct hci_dev
*hdev
)
2254 struct bt_uuid
*uuid
, *tmp
;
2256 list_for_each_entry_safe(uuid
, tmp
, &hdev
->uuids
, list
) {
2257 list_del(&uuid
->list
);
2262 void hci_link_keys_clear(struct hci_dev
*hdev
)
2264 struct link_key
*key
;
2266 list_for_each_entry_rcu(key
, &hdev
->link_keys
, list
) {
2267 list_del_rcu(&key
->list
);
2268 kfree_rcu(key
, rcu
);
2272 void hci_smp_ltks_clear(struct hci_dev
*hdev
)
2276 list_for_each_entry_rcu(k
, &hdev
->long_term_keys
, list
) {
2277 list_del_rcu(&k
->list
);
2282 void hci_smp_irks_clear(struct hci_dev
*hdev
)
2286 list_for_each_entry_rcu(k
, &hdev
->identity_resolving_keys
, list
) {
2287 list_del_rcu(&k
->list
);
2292 struct link_key
*hci_find_link_key(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
)
2297 list_for_each_entry_rcu(k
, &hdev
->link_keys
, list
) {
2298 if (bacmp(bdaddr
, &k
->bdaddr
) == 0) {
2308 static bool hci_persistent_key(struct hci_dev
*hdev
, struct hci_conn
*conn
,
2309 u8 key_type
, u8 old_key_type
)
2312 if (key_type
< 0x03)
2315 /* Debug keys are insecure so don't store them persistently */
2316 if (key_type
== HCI_LK_DEBUG_COMBINATION
)
2319 /* Changed combination key and there's no previous one */
2320 if (key_type
== HCI_LK_CHANGED_COMBINATION
&& old_key_type
== 0xff)
2323 /* Security mode 3 case */
2327 /* BR/EDR key derived using SC from an LE link */
2328 if (conn
->type
== LE_LINK
)
2331 /* Neither local nor remote side had no-bonding as requirement */
2332 if (conn
->auth_type
> 0x01 && conn
->remote_auth
> 0x01)
2335 /* Local side had dedicated bonding as requirement */
2336 if (conn
->auth_type
== 0x02 || conn
->auth_type
== 0x03)
2339 /* Remote side had dedicated bonding as requirement */
2340 if (conn
->remote_auth
== 0x02 || conn
->remote_auth
== 0x03)
2343 /* If none of the above criteria match, then don't store the key
2348 static u8
ltk_role(u8 type
)
2350 if (type
== SMP_LTK
)
2351 return HCI_ROLE_MASTER
;
2353 return HCI_ROLE_SLAVE
;
2356 struct smp_ltk
*hci_find_ltk(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
,
2357 u8 addr_type
, u8 role
)
2362 list_for_each_entry_rcu(k
, &hdev
->long_term_keys
, list
) {
2363 if (addr_type
!= k
->bdaddr_type
|| bacmp(bdaddr
, &k
->bdaddr
))
2366 if (smp_ltk_is_sc(k
) || ltk_role(k
->type
) == role
) {
2376 struct smp_irk
*hci_find_irk_by_rpa(struct hci_dev
*hdev
, bdaddr_t
*rpa
)
2378 struct smp_irk
*irk
;
2381 list_for_each_entry_rcu(irk
, &hdev
->identity_resolving_keys
, list
) {
2382 if (!bacmp(&irk
->rpa
, rpa
)) {
2388 list_for_each_entry_rcu(irk
, &hdev
->identity_resolving_keys
, list
) {
2389 if (smp_irk_matches(hdev
, irk
->val
, rpa
)) {
2390 bacpy(&irk
->rpa
, rpa
);
2400 struct smp_irk
*hci_find_irk_by_addr(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
,
2403 struct smp_irk
*irk
;
2405 /* Identity Address must be public or static random */
2406 if (addr_type
== ADDR_LE_DEV_RANDOM
&& (bdaddr
->b
[5] & 0xc0) != 0xc0)
2410 list_for_each_entry_rcu(irk
, &hdev
->identity_resolving_keys
, list
) {
2411 if (addr_type
== irk
->addr_type
&&
2412 bacmp(bdaddr
, &irk
->bdaddr
) == 0) {
2422 struct link_key
*hci_add_link_key(struct hci_dev
*hdev
, struct hci_conn
*conn
,
2423 bdaddr_t
*bdaddr
, u8
*val
, u8 type
,
2424 u8 pin_len
, bool *persistent
)
2426 struct link_key
*key
, *old_key
;
2429 old_key
= hci_find_link_key(hdev
, bdaddr
);
2431 old_key_type
= old_key
->type
;
2434 old_key_type
= conn
? conn
->key_type
: 0xff;
2435 key
= kzalloc(sizeof(*key
), GFP_KERNEL
);
2438 list_add_rcu(&key
->list
, &hdev
->link_keys
);
2441 BT_DBG("%s key for %pMR type %u", hdev
->name
, bdaddr
, type
);
2443 /* Some buggy controller combinations generate a changed
2444 * combination key for legacy pairing even when there's no
2446 if (type
== HCI_LK_CHANGED_COMBINATION
&&
2447 (!conn
|| conn
->remote_auth
== 0xff) && old_key_type
== 0xff) {
2448 type
= HCI_LK_COMBINATION
;
2450 conn
->key_type
= type
;
2453 bacpy(&key
->bdaddr
, bdaddr
);
2454 memcpy(key
->val
, val
, HCI_LINK_KEY_SIZE
);
2455 key
->pin_len
= pin_len
;
2457 if (type
== HCI_LK_CHANGED_COMBINATION
)
2458 key
->type
= old_key_type
;
2463 *persistent
= hci_persistent_key(hdev
, conn
, type
,
2469 struct smp_ltk
*hci_add_ltk(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
,
2470 u8 addr_type
, u8 type
, u8 authenticated
,
2471 u8 tk
[16], u8 enc_size
, __le16 ediv
, __le64 rand
)
2473 struct smp_ltk
*key
, *old_key
;
2474 u8 role
= ltk_role(type
);
2476 old_key
= hci_find_ltk(hdev
, bdaddr
, addr_type
, role
);
2480 key
= kzalloc(sizeof(*key
), GFP_KERNEL
);
2483 list_add_rcu(&key
->list
, &hdev
->long_term_keys
);
2486 bacpy(&key
->bdaddr
, bdaddr
);
2487 key
->bdaddr_type
= addr_type
;
2488 memcpy(key
->val
, tk
, sizeof(key
->val
));
2489 key
->authenticated
= authenticated
;
2492 key
->enc_size
= enc_size
;
2498 struct smp_irk
*hci_add_irk(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
,
2499 u8 addr_type
, u8 val
[16], bdaddr_t
*rpa
)
2501 struct smp_irk
*irk
;
2503 irk
= hci_find_irk_by_addr(hdev
, bdaddr
, addr_type
);
2505 irk
= kzalloc(sizeof(*irk
), GFP_KERNEL
);
2509 bacpy(&irk
->bdaddr
, bdaddr
);
2510 irk
->addr_type
= addr_type
;
2512 list_add_rcu(&irk
->list
, &hdev
->identity_resolving_keys
);
2515 memcpy(irk
->val
, val
, 16);
2516 bacpy(&irk
->rpa
, rpa
);
2521 int hci_remove_link_key(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
)
2523 struct link_key
*key
;
2525 key
= hci_find_link_key(hdev
, bdaddr
);
2529 BT_DBG("%s removing %pMR", hdev
->name
, bdaddr
);
2531 list_del_rcu(&key
->list
);
2532 kfree_rcu(key
, rcu
);
2537 int hci_remove_ltk(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
, u8 bdaddr_type
)
2542 list_for_each_entry_rcu(k
, &hdev
->long_term_keys
, list
) {
2543 if (bacmp(bdaddr
, &k
->bdaddr
) || k
->bdaddr_type
!= bdaddr_type
)
2546 BT_DBG("%s removing %pMR", hdev
->name
, bdaddr
);
2548 list_del_rcu(&k
->list
);
2553 return removed
? 0 : -ENOENT
;
2556 void hci_remove_irk(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
, u8 addr_type
)
2560 list_for_each_entry_rcu(k
, &hdev
->identity_resolving_keys
, list
) {
2561 if (bacmp(bdaddr
, &k
->bdaddr
) || k
->addr_type
!= addr_type
)
2564 BT_DBG("%s removing %pMR", hdev
->name
, bdaddr
);
2566 list_del_rcu(&k
->list
);
2571 bool hci_bdaddr_is_paired(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
, u8 type
)
2574 struct smp_irk
*irk
;
2577 if (type
== BDADDR_BREDR
) {
2578 if (hci_find_link_key(hdev
, bdaddr
))
2583 /* Convert to HCI addr type which struct smp_ltk uses */
2584 if (type
== BDADDR_LE_PUBLIC
)
2585 addr_type
= ADDR_LE_DEV_PUBLIC
;
2587 addr_type
= ADDR_LE_DEV_RANDOM
;
2589 irk
= hci_get_irk(hdev
, bdaddr
, addr_type
);
2591 bdaddr
= &irk
->bdaddr
;
2592 addr_type
= irk
->addr_type
;
2596 list_for_each_entry_rcu(k
, &hdev
->long_term_keys
, list
) {
2597 if (k
->bdaddr_type
== addr_type
&& !bacmp(bdaddr
, &k
->bdaddr
)) {
2607 /* HCI command timer function */
2608 static void hci_cmd_timeout(struct work_struct
*work
)
2610 struct hci_dev
*hdev
= container_of(work
, struct hci_dev
,
2613 if (hdev
->sent_cmd
) {
2614 struct hci_command_hdr
*sent
= (void *) hdev
->sent_cmd
->data
;
2615 u16 opcode
= __le16_to_cpu(sent
->opcode
);
2617 bt_dev_err(hdev
, "command 0x%4.4x tx timeout", opcode
);
2619 bt_dev_err(hdev
, "command tx timeout");
2622 if (hdev
->cmd_timeout
)
2623 hdev
->cmd_timeout(hdev
);
2625 atomic_set(&hdev
->cmd_cnt
, 1);
2626 queue_work(hdev
->workqueue
, &hdev
->cmd_work
);
2629 struct oob_data
*hci_find_remote_oob_data(struct hci_dev
*hdev
,
2630 bdaddr_t
*bdaddr
, u8 bdaddr_type
)
2632 struct oob_data
*data
;
2634 list_for_each_entry(data
, &hdev
->remote_oob_data
, list
) {
2635 if (bacmp(bdaddr
, &data
->bdaddr
) != 0)
2637 if (data
->bdaddr_type
!= bdaddr_type
)
2645 int hci_remove_remote_oob_data(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
,
2648 struct oob_data
*data
;
2650 data
= hci_find_remote_oob_data(hdev
, bdaddr
, bdaddr_type
);
2654 BT_DBG("%s removing %pMR (%u)", hdev
->name
, bdaddr
, bdaddr_type
);
2656 list_del(&data
->list
);
2662 void hci_remote_oob_data_clear(struct hci_dev
*hdev
)
2664 struct oob_data
*data
, *n
;
2666 list_for_each_entry_safe(data
, n
, &hdev
->remote_oob_data
, list
) {
2667 list_del(&data
->list
);
2672 int hci_add_remote_oob_data(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
,
2673 u8 bdaddr_type
, u8
*hash192
, u8
*rand192
,
2674 u8
*hash256
, u8
*rand256
)
2676 struct oob_data
*data
;
2678 data
= hci_find_remote_oob_data(hdev
, bdaddr
, bdaddr_type
);
2680 data
= kmalloc(sizeof(*data
), GFP_KERNEL
);
2684 bacpy(&data
->bdaddr
, bdaddr
);
2685 data
->bdaddr_type
= bdaddr_type
;
2686 list_add(&data
->list
, &hdev
->remote_oob_data
);
2689 if (hash192
&& rand192
) {
2690 memcpy(data
->hash192
, hash192
, sizeof(data
->hash192
));
2691 memcpy(data
->rand192
, rand192
, sizeof(data
->rand192
));
2692 if (hash256
&& rand256
)
2693 data
->present
= 0x03;
2695 memset(data
->hash192
, 0, sizeof(data
->hash192
));
2696 memset(data
->rand192
, 0, sizeof(data
->rand192
));
2697 if (hash256
&& rand256
)
2698 data
->present
= 0x02;
2700 data
->present
= 0x00;
2703 if (hash256
&& rand256
) {
2704 memcpy(data
->hash256
, hash256
, sizeof(data
->hash256
));
2705 memcpy(data
->rand256
, rand256
, sizeof(data
->rand256
));
2707 memset(data
->hash256
, 0, sizeof(data
->hash256
));
2708 memset(data
->rand256
, 0, sizeof(data
->rand256
));
2709 if (hash192
&& rand192
)
2710 data
->present
= 0x01;
2713 BT_DBG("%s for %pMR", hdev
->name
, bdaddr
);
2718 /* This function requires the caller holds hdev->lock */
2719 struct adv_info
*hci_find_adv_instance(struct hci_dev
*hdev
, u8 instance
)
2721 struct adv_info
*adv_instance
;
2723 list_for_each_entry(adv_instance
, &hdev
->adv_instances
, list
) {
2724 if (adv_instance
->instance
== instance
)
2725 return adv_instance
;
2731 /* This function requires the caller holds hdev->lock */
2732 struct adv_info
*hci_get_next_instance(struct hci_dev
*hdev
, u8 instance
)
2734 struct adv_info
*cur_instance
;
2736 cur_instance
= hci_find_adv_instance(hdev
, instance
);
2740 if (cur_instance
== list_last_entry(&hdev
->adv_instances
,
2741 struct adv_info
, list
))
2742 return list_first_entry(&hdev
->adv_instances
,
2743 struct adv_info
, list
);
2745 return list_next_entry(cur_instance
, list
);
2748 /* This function requires the caller holds hdev->lock */
2749 int hci_remove_adv_instance(struct hci_dev
*hdev
, u8 instance
)
2751 struct adv_info
*adv_instance
;
2753 adv_instance
= hci_find_adv_instance(hdev
, instance
);
2757 BT_DBG("%s removing %dMR", hdev
->name
, instance
);
2759 if (hdev
->cur_adv_instance
== instance
) {
2760 if (hdev
->adv_instance_timeout
) {
2761 cancel_delayed_work(&hdev
->adv_instance_expire
);
2762 hdev
->adv_instance_timeout
= 0;
2764 hdev
->cur_adv_instance
= 0x00;
2767 cancel_delayed_work_sync(&adv_instance
->rpa_expired_cb
);
2769 list_del(&adv_instance
->list
);
2770 kfree(adv_instance
);
2772 hdev
->adv_instance_cnt
--;
2777 void hci_adv_instances_set_rpa_expired(struct hci_dev
*hdev
, bool rpa_expired
)
2779 struct adv_info
*adv_instance
, *n
;
2781 list_for_each_entry_safe(adv_instance
, n
, &hdev
->adv_instances
, list
)
2782 adv_instance
->rpa_expired
= rpa_expired
;
2785 /* This function requires the caller holds hdev->lock */
2786 void hci_adv_instances_clear(struct hci_dev
*hdev
)
2788 struct adv_info
*adv_instance
, *n
;
2790 if (hdev
->adv_instance_timeout
) {
2791 cancel_delayed_work(&hdev
->adv_instance_expire
);
2792 hdev
->adv_instance_timeout
= 0;
2795 list_for_each_entry_safe(adv_instance
, n
, &hdev
->adv_instances
, list
) {
2796 cancel_delayed_work_sync(&adv_instance
->rpa_expired_cb
);
2797 list_del(&adv_instance
->list
);
2798 kfree(adv_instance
);
2801 hdev
->adv_instance_cnt
= 0;
2802 hdev
->cur_adv_instance
= 0x00;
2805 static void adv_instance_rpa_expired(struct work_struct
*work
)
2807 struct adv_info
*adv_instance
= container_of(work
, struct adv_info
,
2808 rpa_expired_cb
.work
);
2812 adv_instance
->rpa_expired
= true;
2815 /* This function requires the caller holds hdev->lock */
2816 int hci_add_adv_instance(struct hci_dev
*hdev
, u8 instance
, u32 flags
,
2817 u16 adv_data_len
, u8
*adv_data
,
2818 u16 scan_rsp_len
, u8
*scan_rsp_data
,
2819 u16 timeout
, u16 duration
)
2821 struct adv_info
*adv_instance
;
2823 adv_instance
= hci_find_adv_instance(hdev
, instance
);
2825 memset(adv_instance
->adv_data
, 0,
2826 sizeof(adv_instance
->adv_data
));
2827 memset(adv_instance
->scan_rsp_data
, 0,
2828 sizeof(adv_instance
->scan_rsp_data
));
2830 if (hdev
->adv_instance_cnt
>= HCI_MAX_ADV_INSTANCES
||
2831 instance
< 1 || instance
> HCI_MAX_ADV_INSTANCES
)
2834 adv_instance
= kzalloc(sizeof(*adv_instance
), GFP_KERNEL
);
2838 adv_instance
->pending
= true;
2839 adv_instance
->instance
= instance
;
2840 list_add(&adv_instance
->list
, &hdev
->adv_instances
);
2841 hdev
->adv_instance_cnt
++;
2844 adv_instance
->flags
= flags
;
2845 adv_instance
->adv_data_len
= adv_data_len
;
2846 adv_instance
->scan_rsp_len
= scan_rsp_len
;
2849 memcpy(adv_instance
->adv_data
, adv_data
, adv_data_len
);
2852 memcpy(adv_instance
->scan_rsp_data
,
2853 scan_rsp_data
, scan_rsp_len
);
2855 adv_instance
->timeout
= timeout
;
2856 adv_instance
->remaining_time
= timeout
;
2859 adv_instance
->duration
= HCI_DEFAULT_ADV_DURATION
;
2861 adv_instance
->duration
= duration
;
2863 adv_instance
->tx_power
= HCI_TX_POWER_INVALID
;
2865 INIT_DELAYED_WORK(&adv_instance
->rpa_expired_cb
,
2866 adv_instance_rpa_expired
);
2868 BT_DBG("%s for %dMR", hdev
->name
, instance
);
2873 struct bdaddr_list
*hci_bdaddr_list_lookup(struct list_head
*bdaddr_list
,
2874 bdaddr_t
*bdaddr
, u8 type
)
2876 struct bdaddr_list
*b
;
2878 list_for_each_entry(b
, bdaddr_list
, list
) {
2879 if (!bacmp(&b
->bdaddr
, bdaddr
) && b
->bdaddr_type
== type
)
2886 struct bdaddr_list_with_irk
*hci_bdaddr_list_lookup_with_irk(
2887 struct list_head
*bdaddr_list
, bdaddr_t
*bdaddr
,
2890 struct bdaddr_list_with_irk
*b
;
2892 list_for_each_entry(b
, bdaddr_list
, list
) {
2893 if (!bacmp(&b
->bdaddr
, bdaddr
) && b
->bdaddr_type
== type
)
2900 void hci_bdaddr_list_clear(struct list_head
*bdaddr_list
)
2902 struct bdaddr_list
*b
, *n
;
2904 list_for_each_entry_safe(b
, n
, bdaddr_list
, list
) {
2910 int hci_bdaddr_list_add(struct list_head
*list
, bdaddr_t
*bdaddr
, u8 type
)
2912 struct bdaddr_list
*entry
;
2914 if (!bacmp(bdaddr
, BDADDR_ANY
))
2917 if (hci_bdaddr_list_lookup(list
, bdaddr
, type
))
2920 entry
= kzalloc(sizeof(*entry
), GFP_KERNEL
);
2924 bacpy(&entry
->bdaddr
, bdaddr
);
2925 entry
->bdaddr_type
= type
;
2927 list_add(&entry
->list
, list
);
2932 int hci_bdaddr_list_add_with_irk(struct list_head
*list
, bdaddr_t
*bdaddr
,
2933 u8 type
, u8
*peer_irk
, u8
*local_irk
)
2935 struct bdaddr_list_with_irk
*entry
;
2937 if (!bacmp(bdaddr
, BDADDR_ANY
))
2940 if (hci_bdaddr_list_lookup(list
, bdaddr
, type
))
2943 entry
= kzalloc(sizeof(*entry
), GFP_KERNEL
);
2947 bacpy(&entry
->bdaddr
, bdaddr
);
2948 entry
->bdaddr_type
= type
;
2951 memcpy(entry
->peer_irk
, peer_irk
, 16);
2954 memcpy(entry
->local_irk
, local_irk
, 16);
2956 list_add(&entry
->list
, list
);
2961 int hci_bdaddr_list_del(struct list_head
*list
, bdaddr_t
*bdaddr
, u8 type
)
2963 struct bdaddr_list
*entry
;
2965 if (!bacmp(bdaddr
, BDADDR_ANY
)) {
2966 hci_bdaddr_list_clear(list
);
2970 entry
= hci_bdaddr_list_lookup(list
, bdaddr
, type
);
2974 list_del(&entry
->list
);
2980 int hci_bdaddr_list_del_with_irk(struct list_head
*list
, bdaddr_t
*bdaddr
,
2983 struct bdaddr_list_with_irk
*entry
;
2985 if (!bacmp(bdaddr
, BDADDR_ANY
)) {
2986 hci_bdaddr_list_clear(list
);
2990 entry
= hci_bdaddr_list_lookup_with_irk(list
, bdaddr
, type
);
2994 list_del(&entry
->list
);
3000 /* This function requires the caller holds hdev->lock */
3001 struct hci_conn_params
*hci_conn_params_lookup(struct hci_dev
*hdev
,
3002 bdaddr_t
*addr
, u8 addr_type
)
3004 struct hci_conn_params
*params
;
3006 list_for_each_entry(params
, &hdev
->le_conn_params
, list
) {
3007 if (bacmp(¶ms
->addr
, addr
) == 0 &&
3008 params
->addr_type
== addr_type
) {
3016 /* This function requires the caller holds hdev->lock */
3017 struct hci_conn_params
*hci_pend_le_action_lookup(struct list_head
*list
,
3018 bdaddr_t
*addr
, u8 addr_type
)
3020 struct hci_conn_params
*param
;
3022 list_for_each_entry(param
, list
, action
) {
3023 if (bacmp(¶m
->addr
, addr
) == 0 &&
3024 param
->addr_type
== addr_type
)
3031 /* This function requires the caller holds hdev->lock */
3032 struct hci_conn_params
*hci_conn_params_add(struct hci_dev
*hdev
,
3033 bdaddr_t
*addr
, u8 addr_type
)
3035 struct hci_conn_params
*params
;
3037 params
= hci_conn_params_lookup(hdev
, addr
, addr_type
);
3041 params
= kzalloc(sizeof(*params
), GFP_KERNEL
);
3043 bt_dev_err(hdev
, "out of memory");
3047 bacpy(¶ms
->addr
, addr
);
3048 params
->addr_type
= addr_type
;
3050 list_add(¶ms
->list
, &hdev
->le_conn_params
);
3051 INIT_LIST_HEAD(¶ms
->action
);
3053 params
->conn_min_interval
= hdev
->le_conn_min_interval
;
3054 params
->conn_max_interval
= hdev
->le_conn_max_interval
;
3055 params
->conn_latency
= hdev
->le_conn_latency
;
3056 params
->supervision_timeout
= hdev
->le_supv_timeout
;
3057 params
->auto_connect
= HCI_AUTO_CONN_DISABLED
;
3059 BT_DBG("addr %pMR (type %u)", addr
, addr_type
);
3064 static void hci_conn_params_free(struct hci_conn_params
*params
)
3067 hci_conn_drop(params
->conn
);
3068 hci_conn_put(params
->conn
);
3071 list_del(¶ms
->action
);
3072 list_del(¶ms
->list
);
3076 /* This function requires the caller holds hdev->lock */
3077 void hci_conn_params_del(struct hci_dev
*hdev
, bdaddr_t
*addr
, u8 addr_type
)
3079 struct hci_conn_params
*params
;
3081 params
= hci_conn_params_lookup(hdev
, addr
, addr_type
);
3085 hci_conn_params_free(params
);
3087 hci_update_background_scan(hdev
);
3089 BT_DBG("addr %pMR (type %u)", addr
, addr_type
);
3092 /* This function requires the caller holds hdev->lock */
3093 void hci_conn_params_clear_disabled(struct hci_dev
*hdev
)
3095 struct hci_conn_params
*params
, *tmp
;
3097 list_for_each_entry_safe(params
, tmp
, &hdev
->le_conn_params
, list
) {
3098 if (params
->auto_connect
!= HCI_AUTO_CONN_DISABLED
)
3101 /* If trying to estabilish one time connection to disabled
3102 * device, leave the params, but mark them as just once.
3104 if (params
->explicit_connect
) {
3105 params
->auto_connect
= HCI_AUTO_CONN_EXPLICIT
;
3109 list_del(¶ms
->list
);
3113 BT_DBG("All LE disabled connection parameters were removed");
3116 /* This function requires the caller holds hdev->lock */
3117 static void hci_conn_params_clear_all(struct hci_dev
*hdev
)
3119 struct hci_conn_params
*params
, *tmp
;
3121 list_for_each_entry_safe(params
, tmp
, &hdev
->le_conn_params
, list
)
3122 hci_conn_params_free(params
);
3124 BT_DBG("All LE connection parameters were removed");
3127 /* Copy the Identity Address of the controller.
3129 * If the controller has a public BD_ADDR, then by default use that one.
3130 * If this is a LE only controller without a public address, default to
3131 * the static random address.
3133 * For debugging purposes it is possible to force controllers with a
3134 * public address to use the static random address instead.
3136 * In case BR/EDR has been disabled on a dual-mode controller and
3137 * userspace has configured a static address, then that address
3138 * becomes the identity address instead of the public BR/EDR address.
3140 void hci_copy_identity_address(struct hci_dev
*hdev
, bdaddr_t
*bdaddr
,
3143 if (hci_dev_test_flag(hdev
, HCI_FORCE_STATIC_ADDR
) ||
3144 !bacmp(&hdev
->bdaddr
, BDADDR_ANY
) ||
3145 (!hci_dev_test_flag(hdev
, HCI_BREDR_ENABLED
) &&
3146 bacmp(&hdev
->static_addr
, BDADDR_ANY
))) {
3147 bacpy(bdaddr
, &hdev
->static_addr
);
3148 *bdaddr_type
= ADDR_LE_DEV_RANDOM
;
3150 bacpy(bdaddr
, &hdev
->bdaddr
);
3151 *bdaddr_type
= ADDR_LE_DEV_PUBLIC
;
3155 /* Alloc HCI device */
3156 struct hci_dev
*hci_alloc_dev(void)
3158 struct hci_dev
*hdev
;
3160 hdev
= kzalloc(sizeof(*hdev
), GFP_KERNEL
);
3164 hdev
->pkt_type
= (HCI_DM1
| HCI_DH1
| HCI_HV1
);
3165 hdev
->esco_type
= (ESCO_HV1
);
3166 hdev
->link_mode
= (HCI_LM_ACCEPT
);
3167 hdev
->num_iac
= 0x01; /* One IAC support is mandatory */
3168 hdev
->io_capability
= 0x03; /* No Input No Output */
3169 hdev
->manufacturer
= 0xffff; /* Default to internal use */
3170 hdev
->inq_tx_power
= HCI_TX_POWER_INVALID
;
3171 hdev
->adv_tx_power
= HCI_TX_POWER_INVALID
;
3172 hdev
->adv_instance_cnt
= 0;
3173 hdev
->cur_adv_instance
= 0x00;
3174 hdev
->adv_instance_timeout
= 0;
3176 hdev
->sniff_max_interval
= 800;
3177 hdev
->sniff_min_interval
= 80;
3179 hdev
->le_adv_channel_map
= 0x07;
3180 hdev
->le_adv_min_interval
= 0x0800;
3181 hdev
->le_adv_max_interval
= 0x0800;
3182 hdev
->le_scan_interval
= 0x0060;
3183 hdev
->le_scan_window
= 0x0030;
3184 hdev
->le_conn_min_interval
= 0x0018;
3185 hdev
->le_conn_max_interval
= 0x0028;
3186 hdev
->le_conn_latency
= 0x0000;
3187 hdev
->le_supv_timeout
= 0x002a;
3188 hdev
->le_def_tx_len
= 0x001b;
3189 hdev
->le_def_tx_time
= 0x0148;
3190 hdev
->le_max_tx_len
= 0x001b;
3191 hdev
->le_max_tx_time
= 0x0148;
3192 hdev
->le_max_rx_len
= 0x001b;
3193 hdev
->le_max_rx_time
= 0x0148;
3194 hdev
->le_max_key_size
= SMP_MAX_ENC_KEY_SIZE
;
3195 hdev
->le_min_key_size
= SMP_MIN_ENC_KEY_SIZE
;
3196 hdev
->le_tx_def_phys
= HCI_LE_SET_PHY_1M
;
3197 hdev
->le_rx_def_phys
= HCI_LE_SET_PHY_1M
;
3199 hdev
->rpa_timeout
= HCI_DEFAULT_RPA_TIMEOUT
;
3200 hdev
->discov_interleaved_timeout
= DISCOV_INTERLEAVED_TIMEOUT
;
3201 hdev
->conn_info_min_age
= DEFAULT_CONN_INFO_MIN_AGE
;
3202 hdev
->conn_info_max_age
= DEFAULT_CONN_INFO_MAX_AGE
;
3204 mutex_init(&hdev
->lock
);
3205 mutex_init(&hdev
->req_lock
);
3207 INIT_LIST_HEAD(&hdev
->mgmt_pending
);
3208 INIT_LIST_HEAD(&hdev
->blacklist
);
3209 INIT_LIST_HEAD(&hdev
->whitelist
);
3210 INIT_LIST_HEAD(&hdev
->uuids
);
3211 INIT_LIST_HEAD(&hdev
->link_keys
);
3212 INIT_LIST_HEAD(&hdev
->long_term_keys
);
3213 INIT_LIST_HEAD(&hdev
->identity_resolving_keys
);
3214 INIT_LIST_HEAD(&hdev
->remote_oob_data
);
3215 INIT_LIST_HEAD(&hdev
->le_white_list
);
3216 INIT_LIST_HEAD(&hdev
->le_resolv_list
);
3217 INIT_LIST_HEAD(&hdev
->le_conn_params
);
3218 INIT_LIST_HEAD(&hdev
->pend_le_conns
);
3219 INIT_LIST_HEAD(&hdev
->pend_le_reports
);
3220 INIT_LIST_HEAD(&hdev
->conn_hash
.list
);
3221 INIT_LIST_HEAD(&hdev
->adv_instances
);
3223 INIT_WORK(&hdev
->rx_work
, hci_rx_work
);
3224 INIT_WORK(&hdev
->cmd_work
, hci_cmd_work
);
3225 INIT_WORK(&hdev
->tx_work
, hci_tx_work
);
3226 INIT_WORK(&hdev
->power_on
, hci_power_on
);
3227 INIT_WORK(&hdev
->error_reset
, hci_error_reset
);
3229 INIT_DELAYED_WORK(&hdev
->power_off
, hci_power_off
);
3231 skb_queue_head_init(&hdev
->rx_q
);
3232 skb_queue_head_init(&hdev
->cmd_q
);
3233 skb_queue_head_init(&hdev
->raw_q
);
3235 init_waitqueue_head(&hdev
->req_wait_q
);
3237 INIT_DELAYED_WORK(&hdev
->cmd_timer
, hci_cmd_timeout
);
3239 hci_request_setup(hdev
);
3241 hci_init_sysfs(hdev
);
3242 discovery_init(hdev
);
3246 EXPORT_SYMBOL(hci_alloc_dev
);
3248 /* Free HCI device */
3249 void hci_free_dev(struct hci_dev
*hdev
)
3251 /* will free via device release */
3252 put_device(&hdev
->dev
);
3254 EXPORT_SYMBOL(hci_free_dev
);
3256 /* Register HCI device */
3257 int hci_register_dev(struct hci_dev
*hdev
)
3261 if (!hdev
->open
|| !hdev
->close
|| !hdev
->send
)
3264 /* Do not allow HCI_AMP devices to register at index 0,
3265 * so the index can be used as the AMP controller ID.
3267 switch (hdev
->dev_type
) {
3269 id
= ida_simple_get(&hci_index_ida
, 0, 0, GFP_KERNEL
);
3272 id
= ida_simple_get(&hci_index_ida
, 1, 0, GFP_KERNEL
);
3281 sprintf(hdev
->name
, "hci%d", id
);
3284 BT_DBG("%p name %s bus %d", hdev
, hdev
->name
, hdev
->bus
);
3286 hdev
->workqueue
= alloc_ordered_workqueue("%s", WQ_HIGHPRI
, hdev
->name
);
3287 if (!hdev
->workqueue
) {
3292 hdev
->req_workqueue
= alloc_ordered_workqueue("%s", WQ_HIGHPRI
,
3294 if (!hdev
->req_workqueue
) {
3295 destroy_workqueue(hdev
->workqueue
);
3300 if (!IS_ERR_OR_NULL(bt_debugfs
))
3301 hdev
->debugfs
= debugfs_create_dir(hdev
->name
, bt_debugfs
);
3303 dev_set_name(&hdev
->dev
, "%s", hdev
->name
);
3305 error
= device_add(&hdev
->dev
);
3309 hci_leds_init(hdev
);
3311 hdev
->rfkill
= rfkill_alloc(hdev
->name
, &hdev
->dev
,
3312 RFKILL_TYPE_BLUETOOTH
, &hci_rfkill_ops
,
3315 if (rfkill_register(hdev
->rfkill
) < 0) {
3316 rfkill_destroy(hdev
->rfkill
);
3317 hdev
->rfkill
= NULL
;
3321 if (hdev
->rfkill
&& rfkill_blocked(hdev
->rfkill
))
3322 hci_dev_set_flag(hdev
, HCI_RFKILLED
);
3324 hci_dev_set_flag(hdev
, HCI_SETUP
);
3325 hci_dev_set_flag(hdev
, HCI_AUTO_OFF
);
3327 if (hdev
->dev_type
== HCI_PRIMARY
) {
3328 /* Assume BR/EDR support until proven otherwise (such as
3329 * through reading supported features during init.
3331 hci_dev_set_flag(hdev
, HCI_BREDR_ENABLED
);
3334 write_lock(&hci_dev_list_lock
);
3335 list_add(&hdev
->list
, &hci_dev_list
);
3336 write_unlock(&hci_dev_list_lock
);
3338 /* Devices that are marked for raw-only usage are unconfigured
3339 * and should not be included in normal operation.
3341 if (test_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
))
3342 hci_dev_set_flag(hdev
, HCI_UNCONFIGURED
);
3344 hci_sock_dev_event(hdev
, HCI_DEV_REG
);
3347 queue_work(hdev
->req_workqueue
, &hdev
->power_on
);
3352 destroy_workqueue(hdev
->workqueue
);
3353 destroy_workqueue(hdev
->req_workqueue
);
3355 ida_simple_remove(&hci_index_ida
, hdev
->id
);
3359 EXPORT_SYMBOL(hci_register_dev
);
3361 /* Unregister HCI device */
3362 void hci_unregister_dev(struct hci_dev
*hdev
)
3366 BT_DBG("%p name %s bus %d", hdev
, hdev
->name
, hdev
->bus
);
3368 hci_dev_set_flag(hdev
, HCI_UNREGISTER
);
3372 write_lock(&hci_dev_list_lock
);
3373 list_del(&hdev
->list
);
3374 write_unlock(&hci_dev_list_lock
);
3376 cancel_work_sync(&hdev
->power_on
);
3378 hci_dev_do_close(hdev
);
3380 if (!test_bit(HCI_INIT
, &hdev
->flags
) &&
3381 !hci_dev_test_flag(hdev
, HCI_SETUP
) &&
3382 !hci_dev_test_flag(hdev
, HCI_CONFIG
)) {
3384 mgmt_index_removed(hdev
);
3385 hci_dev_unlock(hdev
);
3388 /* mgmt_index_removed should take care of emptying the
3390 BUG_ON(!list_empty(&hdev
->mgmt_pending
));
3392 hci_sock_dev_event(hdev
, HCI_DEV_UNREG
);
3395 rfkill_unregister(hdev
->rfkill
);
3396 rfkill_destroy(hdev
->rfkill
);
3399 device_del(&hdev
->dev
);
3401 debugfs_remove_recursive(hdev
->debugfs
);
3402 kfree_const(hdev
->hw_info
);
3403 kfree_const(hdev
->fw_info
);
3405 destroy_workqueue(hdev
->workqueue
);
3406 destroy_workqueue(hdev
->req_workqueue
);
3409 hci_bdaddr_list_clear(&hdev
->blacklist
);
3410 hci_bdaddr_list_clear(&hdev
->whitelist
);
3411 hci_uuids_clear(hdev
);
3412 hci_link_keys_clear(hdev
);
3413 hci_smp_ltks_clear(hdev
);
3414 hci_smp_irks_clear(hdev
);
3415 hci_remote_oob_data_clear(hdev
);
3416 hci_adv_instances_clear(hdev
);
3417 hci_bdaddr_list_clear(&hdev
->le_white_list
);
3418 hci_bdaddr_list_clear(&hdev
->le_resolv_list
);
3419 hci_conn_params_clear_all(hdev
);
3420 hci_discovery_filter_clear(hdev
);
3421 hci_dev_unlock(hdev
);
3425 ida_simple_remove(&hci_index_ida
, id
);
3427 EXPORT_SYMBOL(hci_unregister_dev
);
3429 /* Suspend HCI device */
3430 int hci_suspend_dev(struct hci_dev
*hdev
)
3432 hci_sock_dev_event(hdev
, HCI_DEV_SUSPEND
);
3435 EXPORT_SYMBOL(hci_suspend_dev
);
3437 /* Resume HCI device */
3438 int hci_resume_dev(struct hci_dev
*hdev
)
3440 hci_sock_dev_event(hdev
, HCI_DEV_RESUME
);
3443 EXPORT_SYMBOL(hci_resume_dev
);
3445 /* Reset HCI device */
3446 int hci_reset_dev(struct hci_dev
*hdev
)
3448 static const u8 hw_err
[] = { HCI_EV_HARDWARE_ERROR
, 0x01, 0x00 };
3449 struct sk_buff
*skb
;
3451 skb
= bt_skb_alloc(3, GFP_ATOMIC
);
3455 hci_skb_pkt_type(skb
) = HCI_EVENT_PKT
;
3456 skb_put_data(skb
, hw_err
, 3);
3458 /* Send Hardware Error to upper stack */
3459 return hci_recv_frame(hdev
, skb
);
3461 EXPORT_SYMBOL(hci_reset_dev
);
3463 /* Receive frame from HCI drivers */
3464 int hci_recv_frame(struct hci_dev
*hdev
, struct sk_buff
*skb
)
3466 if (!hdev
|| (!test_bit(HCI_UP
, &hdev
->flags
)
3467 && !test_bit(HCI_INIT
, &hdev
->flags
))) {
3472 if (hci_skb_pkt_type(skb
) != HCI_EVENT_PKT
&&
3473 hci_skb_pkt_type(skb
) != HCI_ACLDATA_PKT
&&
3474 hci_skb_pkt_type(skb
) != HCI_SCODATA_PKT
) {
3480 bt_cb(skb
)->incoming
= 1;
3483 __net_timestamp(skb
);
3485 skb_queue_tail(&hdev
->rx_q
, skb
);
3486 queue_work(hdev
->workqueue
, &hdev
->rx_work
);
3490 EXPORT_SYMBOL(hci_recv_frame
);
3492 /* Receive diagnostic message from HCI drivers */
3493 int hci_recv_diag(struct hci_dev
*hdev
, struct sk_buff
*skb
)
3495 /* Mark as diagnostic packet */
3496 hci_skb_pkt_type(skb
) = HCI_DIAG_PKT
;
3499 __net_timestamp(skb
);
3501 skb_queue_tail(&hdev
->rx_q
, skb
);
3502 queue_work(hdev
->workqueue
, &hdev
->rx_work
);
3506 EXPORT_SYMBOL(hci_recv_diag
);
3508 void hci_set_hw_info(struct hci_dev
*hdev
, const char *fmt
, ...)
3512 va_start(vargs
, fmt
);
3513 kfree_const(hdev
->hw_info
);
3514 hdev
->hw_info
= kvasprintf_const(GFP_KERNEL
, fmt
, vargs
);
3517 EXPORT_SYMBOL(hci_set_hw_info
);
3519 void hci_set_fw_info(struct hci_dev
*hdev
, const char *fmt
, ...)
3523 va_start(vargs
, fmt
);
3524 kfree_const(hdev
->fw_info
);
3525 hdev
->fw_info
= kvasprintf_const(GFP_KERNEL
, fmt
, vargs
);
3528 EXPORT_SYMBOL(hci_set_fw_info
);
3530 /* ---- Interface to upper protocols ---- */
3532 int hci_register_cb(struct hci_cb
*cb
)
3534 BT_DBG("%p name %s", cb
, cb
->name
);
3536 mutex_lock(&hci_cb_list_lock
);
3537 list_add_tail(&cb
->list
, &hci_cb_list
);
3538 mutex_unlock(&hci_cb_list_lock
);
3542 EXPORT_SYMBOL(hci_register_cb
);
3544 int hci_unregister_cb(struct hci_cb
*cb
)
3546 BT_DBG("%p name %s", cb
, cb
->name
);
3548 mutex_lock(&hci_cb_list_lock
);
3549 list_del(&cb
->list
);
3550 mutex_unlock(&hci_cb_list_lock
);
3554 EXPORT_SYMBOL(hci_unregister_cb
);
3556 static void hci_send_frame(struct hci_dev
*hdev
, struct sk_buff
*skb
)
3560 BT_DBG("%s type %d len %d", hdev
->name
, hci_skb_pkt_type(skb
),
3564 __net_timestamp(skb
);
3566 /* Send copy to monitor */
3567 hci_send_to_monitor(hdev
, skb
);
3569 if (atomic_read(&hdev
->promisc
)) {
3570 /* Send copy to the sockets */
3571 hci_send_to_sock(hdev
, skb
);
3574 /* Get rid of skb owner, prior to sending to the driver. */
3577 if (!test_bit(HCI_RUNNING
, &hdev
->flags
)) {
3582 err
= hdev
->send(hdev
, skb
);
3584 bt_dev_err(hdev
, "sending frame failed (%d)", err
);
3589 /* Send HCI command */
3590 int hci_send_cmd(struct hci_dev
*hdev
, __u16 opcode
, __u32 plen
,
3593 struct sk_buff
*skb
;
3595 BT_DBG("%s opcode 0x%4.4x plen %d", hdev
->name
, opcode
, plen
);
3597 skb
= hci_prepare_cmd(hdev
, opcode
, plen
, param
);
3599 bt_dev_err(hdev
, "no memory for command");
3603 /* Stand-alone HCI commands must be flagged as
3604 * single-command requests.
3606 bt_cb(skb
)->hci
.req_flags
|= HCI_REQ_START
;
3608 skb_queue_tail(&hdev
->cmd_q
, skb
);
3609 queue_work(hdev
->workqueue
, &hdev
->cmd_work
);
3614 int __hci_cmd_send(struct hci_dev
*hdev
, u16 opcode
, u32 plen
,
3617 struct sk_buff
*skb
;
3619 if (hci_opcode_ogf(opcode
) != 0x3f) {
3620 /* A controller receiving a command shall respond with either
3621 * a Command Status Event or a Command Complete Event.
3622 * Therefore, all standard HCI commands must be sent via the
3623 * standard API, using hci_send_cmd or hci_cmd_sync helpers.
3624 * Some vendors do not comply with this rule for vendor-specific
3625 * commands and do not return any event. We want to support
3626 * unresponded commands for such cases only.
3628 bt_dev_err(hdev
, "unresponded command not supported");
3632 skb
= hci_prepare_cmd(hdev
, opcode
, plen
, param
);
3634 bt_dev_err(hdev
, "no memory for command (opcode 0x%4.4x)",
3639 hci_send_frame(hdev
, skb
);
3643 EXPORT_SYMBOL(__hci_cmd_send
);
3645 /* Get data from the previously sent command */
3646 void *hci_sent_cmd_data(struct hci_dev
*hdev
, __u16 opcode
)
3648 struct hci_command_hdr
*hdr
;
3650 if (!hdev
->sent_cmd
)
3653 hdr
= (void *) hdev
->sent_cmd
->data
;
3655 if (hdr
->opcode
!= cpu_to_le16(opcode
))
3658 BT_DBG("%s opcode 0x%4.4x", hdev
->name
, opcode
);
3660 return hdev
->sent_cmd
->data
+ HCI_COMMAND_HDR_SIZE
;
3663 /* Send HCI command and wait for command commplete event */
3664 struct sk_buff
*hci_cmd_sync(struct hci_dev
*hdev
, u16 opcode
, u32 plen
,
3665 const void *param
, u32 timeout
)
3667 struct sk_buff
*skb
;
3669 if (!test_bit(HCI_UP
, &hdev
->flags
))
3670 return ERR_PTR(-ENETDOWN
);
3672 bt_dev_dbg(hdev
, "opcode 0x%4.4x plen %d", opcode
, plen
);
3674 hci_req_sync_lock(hdev
);
3675 skb
= __hci_cmd_sync(hdev
, opcode
, plen
, param
, timeout
);
3676 hci_req_sync_unlock(hdev
);
3680 EXPORT_SYMBOL(hci_cmd_sync
);
3683 static void hci_add_acl_hdr(struct sk_buff
*skb
, __u16 handle
, __u16 flags
)
3685 struct hci_acl_hdr
*hdr
;
3688 skb_push(skb
, HCI_ACL_HDR_SIZE
);
3689 skb_reset_transport_header(skb
);
3690 hdr
= (struct hci_acl_hdr
*)skb_transport_header(skb
);
3691 hdr
->handle
= cpu_to_le16(hci_handle_pack(handle
, flags
));
3692 hdr
->dlen
= cpu_to_le16(len
);
3695 static void hci_queue_acl(struct hci_chan
*chan
, struct sk_buff_head
*queue
,
3696 struct sk_buff
*skb
, __u16 flags
)
3698 struct hci_conn
*conn
= chan
->conn
;
3699 struct hci_dev
*hdev
= conn
->hdev
;
3700 struct sk_buff
*list
;
3702 skb
->len
= skb_headlen(skb
);
3705 hci_skb_pkt_type(skb
) = HCI_ACLDATA_PKT
;
3707 switch (hdev
->dev_type
) {
3709 hci_add_acl_hdr(skb
, conn
->handle
, flags
);
3712 hci_add_acl_hdr(skb
, chan
->handle
, flags
);
3715 bt_dev_err(hdev
, "unknown dev_type %d", hdev
->dev_type
);
3719 list
= skb_shinfo(skb
)->frag_list
;
3721 /* Non fragmented */
3722 BT_DBG("%s nonfrag skb %p len %d", hdev
->name
, skb
, skb
->len
);
3724 skb_queue_tail(queue
, skb
);
3727 BT_DBG("%s frag %p len %d", hdev
->name
, skb
, skb
->len
);
3729 skb_shinfo(skb
)->frag_list
= NULL
;
3731 /* Queue all fragments atomically. We need to use spin_lock_bh
3732 * here because of 6LoWPAN links, as there this function is
3733 * called from softirq and using normal spin lock could cause
3736 spin_lock_bh(&queue
->lock
);
3738 __skb_queue_tail(queue
, skb
);
3740 flags
&= ~ACL_START
;
3743 skb
= list
; list
= list
->next
;
3745 hci_skb_pkt_type(skb
) = HCI_ACLDATA_PKT
;
3746 hci_add_acl_hdr(skb
, conn
->handle
, flags
);
3748 BT_DBG("%s frag %p len %d", hdev
->name
, skb
, skb
->len
);
3750 __skb_queue_tail(queue
, skb
);
3753 spin_unlock_bh(&queue
->lock
);
3757 void hci_send_acl(struct hci_chan
*chan
, struct sk_buff
*skb
, __u16 flags
)
3759 struct hci_dev
*hdev
= chan
->conn
->hdev
;
3761 BT_DBG("%s chan %p flags 0x%4.4x", hdev
->name
, chan
, flags
);
3763 hci_queue_acl(chan
, &chan
->data_q
, skb
, flags
);
3765 queue_work(hdev
->workqueue
, &hdev
->tx_work
);
3769 void hci_send_sco(struct hci_conn
*conn
, struct sk_buff
*skb
)
3771 struct hci_dev
*hdev
= conn
->hdev
;
3772 struct hci_sco_hdr hdr
;
3774 BT_DBG("%s len %d", hdev
->name
, skb
->len
);
3776 hdr
.handle
= cpu_to_le16(conn
->handle
);
3777 hdr
.dlen
= skb
->len
;
3779 skb_push(skb
, HCI_SCO_HDR_SIZE
);
3780 skb_reset_transport_header(skb
);
3781 memcpy(skb_transport_header(skb
), &hdr
, HCI_SCO_HDR_SIZE
);
3783 hci_skb_pkt_type(skb
) = HCI_SCODATA_PKT
;
3785 skb_queue_tail(&conn
->data_q
, skb
);
3786 queue_work(hdev
->workqueue
, &hdev
->tx_work
);
3789 /* ---- HCI TX task (outgoing data) ---- */
3791 /* HCI Connection scheduler */
3792 static struct hci_conn
*hci_low_sent(struct hci_dev
*hdev
, __u8 type
,
3795 struct hci_conn_hash
*h
= &hdev
->conn_hash
;
3796 struct hci_conn
*conn
= NULL
, *c
;
3797 unsigned int num
= 0, min
= ~0;
3799 /* We don't have to lock device here. Connections are always
3800 * added and removed with TX task disabled. */
3804 list_for_each_entry_rcu(c
, &h
->list
, list
) {
3805 if (c
->type
!= type
|| skb_queue_empty(&c
->data_q
))
3808 if (c
->state
!= BT_CONNECTED
&& c
->state
!= BT_CONFIG
)
3813 if (c
->sent
< min
) {
3818 if (hci_conn_num(hdev
, type
) == num
)
3827 switch (conn
->type
) {
3829 cnt
= hdev
->acl_cnt
;
3833 cnt
= hdev
->sco_cnt
;
3836 cnt
= hdev
->le_mtu
? hdev
->le_cnt
: hdev
->acl_cnt
;
3840 bt_dev_err(hdev
, "unknown link type %d", conn
->type
);
3848 BT_DBG("conn %p quote %d", conn
, *quote
);
3852 static void hci_link_tx_to(struct hci_dev
*hdev
, __u8 type
)
3854 struct hci_conn_hash
*h
= &hdev
->conn_hash
;
3857 bt_dev_err(hdev
, "link tx timeout");
3861 /* Kill stalled connections */
3862 list_for_each_entry_rcu(c
, &h
->list
, list
) {
3863 if (c
->type
== type
&& c
->sent
) {
3864 bt_dev_err(hdev
, "killing stalled connection %pMR",
3866 hci_disconnect(c
, HCI_ERROR_REMOTE_USER_TERM
);
3873 static struct hci_chan
*hci_chan_sent(struct hci_dev
*hdev
, __u8 type
,
3876 struct hci_conn_hash
*h
= &hdev
->conn_hash
;
3877 struct hci_chan
*chan
= NULL
;
3878 unsigned int num
= 0, min
= ~0, cur_prio
= 0;
3879 struct hci_conn
*conn
;
3880 int cnt
, q
, conn_num
= 0;
3882 BT_DBG("%s", hdev
->name
);
3886 list_for_each_entry_rcu(conn
, &h
->list
, list
) {
3887 struct hci_chan
*tmp
;
3889 if (conn
->type
!= type
)
3892 if (conn
->state
!= BT_CONNECTED
&& conn
->state
!= BT_CONFIG
)
3897 list_for_each_entry_rcu(tmp
, &conn
->chan_list
, list
) {
3898 struct sk_buff
*skb
;
3900 if (skb_queue_empty(&tmp
->data_q
))
3903 skb
= skb_peek(&tmp
->data_q
);
3904 if (skb
->priority
< cur_prio
)
3907 if (skb
->priority
> cur_prio
) {
3910 cur_prio
= skb
->priority
;
3915 if (conn
->sent
< min
) {
3921 if (hci_conn_num(hdev
, type
) == conn_num
)
3930 switch (chan
->conn
->type
) {
3932 cnt
= hdev
->acl_cnt
;
3935 cnt
= hdev
->block_cnt
;
3939 cnt
= hdev
->sco_cnt
;
3942 cnt
= hdev
->le_mtu
? hdev
->le_cnt
: hdev
->acl_cnt
;
3946 bt_dev_err(hdev
, "unknown link type %d", chan
->conn
->type
);
3951 BT_DBG("chan %p quote %d", chan
, *quote
);
3955 static void hci_prio_recalculate(struct hci_dev
*hdev
, __u8 type
)
3957 struct hci_conn_hash
*h
= &hdev
->conn_hash
;
3958 struct hci_conn
*conn
;
3961 BT_DBG("%s", hdev
->name
);
3965 list_for_each_entry_rcu(conn
, &h
->list
, list
) {
3966 struct hci_chan
*chan
;
3968 if (conn
->type
!= type
)
3971 if (conn
->state
!= BT_CONNECTED
&& conn
->state
!= BT_CONFIG
)
3976 list_for_each_entry_rcu(chan
, &conn
->chan_list
, list
) {
3977 struct sk_buff
*skb
;
3984 if (skb_queue_empty(&chan
->data_q
))
3987 skb
= skb_peek(&chan
->data_q
);
3988 if (skb
->priority
>= HCI_PRIO_MAX
- 1)
3991 skb
->priority
= HCI_PRIO_MAX
- 1;
3993 BT_DBG("chan %p skb %p promoted to %d", chan
, skb
,
3997 if (hci_conn_num(hdev
, type
) == num
)
4005 static inline int __get_blocks(struct hci_dev
*hdev
, struct sk_buff
*skb
)
4007 /* Calculate count of blocks used by this packet */
4008 return DIV_ROUND_UP(skb
->len
- HCI_ACL_HDR_SIZE
, hdev
->block_len
);
4011 static void __check_timeout(struct hci_dev
*hdev
, unsigned int cnt
)
4013 if (!hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
)) {
4014 /* ACL tx timeout must be longer than maximum
4015 * link supervision timeout (40.9 seconds) */
4016 if (!cnt
&& time_after(jiffies
, hdev
->acl_last_tx
+
4017 HCI_ACL_TX_TIMEOUT
))
4018 hci_link_tx_to(hdev
, ACL_LINK
);
4022 static void hci_sched_acl_pkt(struct hci_dev
*hdev
)
4024 unsigned int cnt
= hdev
->acl_cnt
;
4025 struct hci_chan
*chan
;
4026 struct sk_buff
*skb
;
4029 __check_timeout(hdev
, cnt
);
4031 while (hdev
->acl_cnt
&&
4032 (chan
= hci_chan_sent(hdev
, ACL_LINK
, "e
))) {
4033 u32 priority
= (skb_peek(&chan
->data_q
))->priority
;
4034 while (quote
-- && (skb
= skb_peek(&chan
->data_q
))) {
4035 BT_DBG("chan %p skb %p len %d priority %u", chan
, skb
,
4036 skb
->len
, skb
->priority
);
4038 /* Stop if priority has changed */
4039 if (skb
->priority
< priority
)
4042 skb
= skb_dequeue(&chan
->data_q
);
4044 hci_conn_enter_active_mode(chan
->conn
,
4045 bt_cb(skb
)->force_active
);
4047 hci_send_frame(hdev
, skb
);
4048 hdev
->acl_last_tx
= jiffies
;
4056 if (cnt
!= hdev
->acl_cnt
)
4057 hci_prio_recalculate(hdev
, ACL_LINK
);
4060 static void hci_sched_acl_blk(struct hci_dev
*hdev
)
4062 unsigned int cnt
= hdev
->block_cnt
;
4063 struct hci_chan
*chan
;
4064 struct sk_buff
*skb
;
4068 __check_timeout(hdev
, cnt
);
4070 BT_DBG("%s", hdev
->name
);
4072 if (hdev
->dev_type
== HCI_AMP
)
4077 while (hdev
->block_cnt
> 0 &&
4078 (chan
= hci_chan_sent(hdev
, type
, "e
))) {
4079 u32 priority
= (skb_peek(&chan
->data_q
))->priority
;
4080 while (quote
> 0 && (skb
= skb_peek(&chan
->data_q
))) {
4083 BT_DBG("chan %p skb %p len %d priority %u", chan
, skb
,
4084 skb
->len
, skb
->priority
);
4086 /* Stop if priority has changed */
4087 if (skb
->priority
< priority
)
4090 skb
= skb_dequeue(&chan
->data_q
);
4092 blocks
= __get_blocks(hdev
, skb
);
4093 if (blocks
> hdev
->block_cnt
)
4096 hci_conn_enter_active_mode(chan
->conn
,
4097 bt_cb(skb
)->force_active
);
4099 hci_send_frame(hdev
, skb
);
4100 hdev
->acl_last_tx
= jiffies
;
4102 hdev
->block_cnt
-= blocks
;
4105 chan
->sent
+= blocks
;
4106 chan
->conn
->sent
+= blocks
;
4110 if (cnt
!= hdev
->block_cnt
)
4111 hci_prio_recalculate(hdev
, type
);
4114 static void hci_sched_acl(struct hci_dev
*hdev
)
4116 BT_DBG("%s", hdev
->name
);
4118 /* No ACL link over BR/EDR controller */
4119 if (!hci_conn_num(hdev
, ACL_LINK
) && hdev
->dev_type
== HCI_PRIMARY
)
4122 /* No AMP link over AMP controller */
4123 if (!hci_conn_num(hdev
, AMP_LINK
) && hdev
->dev_type
== HCI_AMP
)
4126 switch (hdev
->flow_ctl_mode
) {
4127 case HCI_FLOW_CTL_MODE_PACKET_BASED
:
4128 hci_sched_acl_pkt(hdev
);
4131 case HCI_FLOW_CTL_MODE_BLOCK_BASED
:
4132 hci_sched_acl_blk(hdev
);
4138 static void hci_sched_sco(struct hci_dev
*hdev
)
4140 struct hci_conn
*conn
;
4141 struct sk_buff
*skb
;
4144 BT_DBG("%s", hdev
->name
);
4146 if (!hci_conn_num(hdev
, SCO_LINK
))
4149 while (hdev
->sco_cnt
&& (conn
= hci_low_sent(hdev
, SCO_LINK
, "e
))) {
4150 while (quote
-- && (skb
= skb_dequeue(&conn
->data_q
))) {
4151 BT_DBG("skb %p len %d", skb
, skb
->len
);
4152 hci_send_frame(hdev
, skb
);
4155 if (conn
->sent
== ~0)
4161 static void hci_sched_esco(struct hci_dev
*hdev
)
4163 struct hci_conn
*conn
;
4164 struct sk_buff
*skb
;
4167 BT_DBG("%s", hdev
->name
);
4169 if (!hci_conn_num(hdev
, ESCO_LINK
))
4172 while (hdev
->sco_cnt
&& (conn
= hci_low_sent(hdev
, ESCO_LINK
,
4174 while (quote
-- && (skb
= skb_dequeue(&conn
->data_q
))) {
4175 BT_DBG("skb %p len %d", skb
, skb
->len
);
4176 hci_send_frame(hdev
, skb
);
4179 if (conn
->sent
== ~0)
4185 static void hci_sched_le(struct hci_dev
*hdev
)
4187 struct hci_chan
*chan
;
4188 struct sk_buff
*skb
;
4189 int quote
, cnt
, tmp
;
4191 BT_DBG("%s", hdev
->name
);
4193 if (!hci_conn_num(hdev
, LE_LINK
))
4196 if (!hci_dev_test_flag(hdev
, HCI_UNCONFIGURED
)) {
4197 /* LE tx timeout must be longer than maximum
4198 * link supervision timeout (40.9 seconds) */
4199 if (!hdev
->le_cnt
&& hdev
->le_pkts
&&
4200 time_after(jiffies
, hdev
->le_last_tx
+ HZ
* 45))
4201 hci_link_tx_to(hdev
, LE_LINK
);
4204 cnt
= hdev
->le_pkts
? hdev
->le_cnt
: hdev
->acl_cnt
;
4206 while (cnt
&& (chan
= hci_chan_sent(hdev
, LE_LINK
, "e
))) {
4207 u32 priority
= (skb_peek(&chan
->data_q
))->priority
;
4208 while (quote
-- && (skb
= skb_peek(&chan
->data_q
))) {
4209 BT_DBG("chan %p skb %p len %d priority %u", chan
, skb
,
4210 skb
->len
, skb
->priority
);
4212 /* Stop if priority has changed */
4213 if (skb
->priority
< priority
)
4216 skb
= skb_dequeue(&chan
->data_q
);
4218 hci_send_frame(hdev
, skb
);
4219 hdev
->le_last_tx
= jiffies
;
4230 hdev
->acl_cnt
= cnt
;
4233 hci_prio_recalculate(hdev
, LE_LINK
);
4236 static void hci_tx_work(struct work_struct
*work
)
4238 struct hci_dev
*hdev
= container_of(work
, struct hci_dev
, tx_work
);
4239 struct sk_buff
*skb
;
4241 BT_DBG("%s acl %d sco %d le %d", hdev
->name
, hdev
->acl_cnt
,
4242 hdev
->sco_cnt
, hdev
->le_cnt
);
4244 if (!hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
4245 /* Schedule queues and send stuff to HCI driver */
4246 hci_sched_acl(hdev
);
4247 hci_sched_sco(hdev
);
4248 hci_sched_esco(hdev
);
4252 /* Send next queued raw (unknown type) packet */
4253 while ((skb
= skb_dequeue(&hdev
->raw_q
)))
4254 hci_send_frame(hdev
, skb
);
4257 /* ----- HCI RX task (incoming data processing) ----- */
4259 /* ACL data packet */
4260 static void hci_acldata_packet(struct hci_dev
*hdev
, struct sk_buff
*skb
)
4262 struct hci_acl_hdr
*hdr
= (void *) skb
->data
;
4263 struct hci_conn
*conn
;
4264 __u16 handle
, flags
;
4266 skb_pull(skb
, HCI_ACL_HDR_SIZE
);
4268 handle
= __le16_to_cpu(hdr
->handle
);
4269 flags
= hci_flags(handle
);
4270 handle
= hci_handle(handle
);
4272 BT_DBG("%s len %d handle 0x%4.4x flags 0x%4.4x", hdev
->name
, skb
->len
,
4275 hdev
->stat
.acl_rx
++;
4278 conn
= hci_conn_hash_lookup_handle(hdev
, handle
);
4279 hci_dev_unlock(hdev
);
4282 hci_conn_enter_active_mode(conn
, BT_POWER_FORCE_ACTIVE_OFF
);
4284 /* Send to upper protocol */
4285 l2cap_recv_acldata(conn
, skb
, flags
);
4288 bt_dev_err(hdev
, "ACL packet for unknown connection handle %d",
4295 /* SCO data packet */
4296 static void hci_scodata_packet(struct hci_dev
*hdev
, struct sk_buff
*skb
)
4298 struct hci_sco_hdr
*hdr
= (void *) skb
->data
;
4299 struct hci_conn
*conn
;
4302 skb_pull(skb
, HCI_SCO_HDR_SIZE
);
4304 handle
= __le16_to_cpu(hdr
->handle
);
4306 BT_DBG("%s len %d handle 0x%4.4x", hdev
->name
, skb
->len
, handle
);
4308 hdev
->stat
.sco_rx
++;
4311 conn
= hci_conn_hash_lookup_handle(hdev
, handle
);
4312 hci_dev_unlock(hdev
);
4315 /* Send to upper protocol */
4316 sco_recv_scodata(conn
, skb
);
4319 bt_dev_err(hdev
, "SCO packet for unknown connection handle %d",
4326 static bool hci_req_is_complete(struct hci_dev
*hdev
)
4328 struct sk_buff
*skb
;
4330 skb
= skb_peek(&hdev
->cmd_q
);
4334 return (bt_cb(skb
)->hci
.req_flags
& HCI_REQ_START
);
4337 static void hci_resend_last(struct hci_dev
*hdev
)
4339 struct hci_command_hdr
*sent
;
4340 struct sk_buff
*skb
;
4343 if (!hdev
->sent_cmd
)
4346 sent
= (void *) hdev
->sent_cmd
->data
;
4347 opcode
= __le16_to_cpu(sent
->opcode
);
4348 if (opcode
== HCI_OP_RESET
)
4351 skb
= skb_clone(hdev
->sent_cmd
, GFP_KERNEL
);
4355 skb_queue_head(&hdev
->cmd_q
, skb
);
4356 queue_work(hdev
->workqueue
, &hdev
->cmd_work
);
4359 void hci_req_cmd_complete(struct hci_dev
*hdev
, u16 opcode
, u8 status
,
4360 hci_req_complete_t
*req_complete
,
4361 hci_req_complete_skb_t
*req_complete_skb
)
4363 struct sk_buff
*skb
;
4364 unsigned long flags
;
4366 BT_DBG("opcode 0x%04x status 0x%02x", opcode
, status
);
4368 /* If the completed command doesn't match the last one that was
4369 * sent we need to do special handling of it.
4371 if (!hci_sent_cmd_data(hdev
, opcode
)) {
4372 /* Some CSR based controllers generate a spontaneous
4373 * reset complete event during init and any pending
4374 * command will never be completed. In such a case we
4375 * need to resend whatever was the last sent
4378 if (test_bit(HCI_INIT
, &hdev
->flags
) && opcode
== HCI_OP_RESET
)
4379 hci_resend_last(hdev
);
4384 /* If we reach this point this event matches the last command sent */
4385 hci_dev_clear_flag(hdev
, HCI_CMD_PENDING
);
4387 /* If the command succeeded and there's still more commands in
4388 * this request the request is not yet complete.
4390 if (!status
&& !hci_req_is_complete(hdev
))
4393 /* If this was the last command in a request the complete
4394 * callback would be found in hdev->sent_cmd instead of the
4395 * command queue (hdev->cmd_q).
4397 if (bt_cb(hdev
->sent_cmd
)->hci
.req_flags
& HCI_REQ_SKB
) {
4398 *req_complete_skb
= bt_cb(hdev
->sent_cmd
)->hci
.req_complete_skb
;
4402 if (bt_cb(hdev
->sent_cmd
)->hci
.req_complete
) {
4403 *req_complete
= bt_cb(hdev
->sent_cmd
)->hci
.req_complete
;
4407 /* Remove all pending commands belonging to this request */
4408 spin_lock_irqsave(&hdev
->cmd_q
.lock
, flags
);
4409 while ((skb
= __skb_dequeue(&hdev
->cmd_q
))) {
4410 if (bt_cb(skb
)->hci
.req_flags
& HCI_REQ_START
) {
4411 __skb_queue_head(&hdev
->cmd_q
, skb
);
4415 if (bt_cb(skb
)->hci
.req_flags
& HCI_REQ_SKB
)
4416 *req_complete_skb
= bt_cb(skb
)->hci
.req_complete_skb
;
4418 *req_complete
= bt_cb(skb
)->hci
.req_complete
;
4421 spin_unlock_irqrestore(&hdev
->cmd_q
.lock
, flags
);
4424 static void hci_rx_work(struct work_struct
*work
)
4426 struct hci_dev
*hdev
= container_of(work
, struct hci_dev
, rx_work
);
4427 struct sk_buff
*skb
;
4429 BT_DBG("%s", hdev
->name
);
4431 while ((skb
= skb_dequeue(&hdev
->rx_q
))) {
4432 /* Send copy to monitor */
4433 hci_send_to_monitor(hdev
, skb
);
4435 if (atomic_read(&hdev
->promisc
)) {
4436 /* Send copy to the sockets */
4437 hci_send_to_sock(hdev
, skb
);
4440 if (hci_dev_test_flag(hdev
, HCI_USER_CHANNEL
)) {
4445 if (test_bit(HCI_INIT
, &hdev
->flags
)) {
4446 /* Don't process data packets in this states. */
4447 switch (hci_skb_pkt_type(skb
)) {
4448 case HCI_ACLDATA_PKT
:
4449 case HCI_SCODATA_PKT
:
4456 switch (hci_skb_pkt_type(skb
)) {
4458 BT_DBG("%s Event packet", hdev
->name
);
4459 hci_event_packet(hdev
, skb
);
4462 case HCI_ACLDATA_PKT
:
4463 BT_DBG("%s ACL data packet", hdev
->name
);
4464 hci_acldata_packet(hdev
, skb
);
4467 case HCI_SCODATA_PKT
:
4468 BT_DBG("%s SCO data packet", hdev
->name
);
4469 hci_scodata_packet(hdev
, skb
);
4479 static void hci_cmd_work(struct work_struct
*work
)
4481 struct hci_dev
*hdev
= container_of(work
, struct hci_dev
, cmd_work
);
4482 struct sk_buff
*skb
;
4484 BT_DBG("%s cmd_cnt %d cmd queued %d", hdev
->name
,
4485 atomic_read(&hdev
->cmd_cnt
), skb_queue_len(&hdev
->cmd_q
));
4487 /* Send queued commands */
4488 if (atomic_read(&hdev
->cmd_cnt
)) {
4489 skb
= skb_dequeue(&hdev
->cmd_q
);
4493 kfree_skb(hdev
->sent_cmd
);
4495 hdev
->sent_cmd
= skb_clone(skb
, GFP_KERNEL
);
4496 if (hdev
->sent_cmd
) {
4497 if (hci_req_status_pend(hdev
))
4498 hci_dev_set_flag(hdev
, HCI_CMD_PENDING
);
4499 atomic_dec(&hdev
->cmd_cnt
);
4500 hci_send_frame(hdev
, skb
);
4501 if (test_bit(HCI_RESET
, &hdev
->flags
))
4502 cancel_delayed_work(&hdev
->cmd_timer
);
4504 schedule_delayed_work(&hdev
->cmd_timer
,
4507 skb_queue_head(&hdev
->cmd_q
, skb
);
4508 queue_work(hdev
->workqueue
, &hdev
->cmd_work
);