btrfs: Don't clear SGID when inheriting ACLs
[linux/fpc-iii.git] / drivers / s390 / cio / qdio_main.c
bloba4ad39ba3873f64911802e567b8c19a6abbad5c6
1 /*
2 * Linux for s390 qdio support, buffer handling, qdio API and module support.
4 * Copyright IBM Corp. 2000, 2008
5 * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
6 * Jan Glauber <jang@linux.vnet.ibm.com>
7 * 2.6 cio integration by Cornelia Huck <cornelia.huck@de.ibm.com>
8 */
9 #include <linux/module.h>
10 #include <linux/init.h>
11 #include <linux/kernel.h>
12 #include <linux/timer.h>
13 #include <linux/delay.h>
14 #include <linux/gfp.h>
15 #include <linux/io.h>
16 #include <linux/atomic.h>
17 #include <asm/debug.h>
18 #include <asm/qdio.h>
19 #include <asm/ipl.h>
21 #include "cio.h"
22 #include "css.h"
23 #include "device.h"
24 #include "qdio.h"
25 #include "qdio_debug.h"
27 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\
28 "Jan Glauber <jang@linux.vnet.ibm.com>");
29 MODULE_DESCRIPTION("QDIO base support");
30 MODULE_LICENSE("GPL");
32 static inline int do_siga_sync(unsigned long schid,
33 unsigned int out_mask, unsigned int in_mask,
34 unsigned int fc)
36 register unsigned long __fc asm ("0") = fc;
37 register unsigned long __schid asm ("1") = schid;
38 register unsigned long out asm ("2") = out_mask;
39 register unsigned long in asm ("3") = in_mask;
40 int cc;
42 asm volatile(
43 " siga 0\n"
44 " ipm %0\n"
45 " srl %0,28\n"
46 : "=d" (cc)
47 : "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc");
48 return cc;
51 static inline int do_siga_input(unsigned long schid, unsigned int mask,
52 unsigned int fc)
54 register unsigned long __fc asm ("0") = fc;
55 register unsigned long __schid asm ("1") = schid;
56 register unsigned long __mask asm ("2") = mask;
57 int cc;
59 asm volatile(
60 " siga 0\n"
61 " ipm %0\n"
62 " srl %0,28\n"
63 : "=d" (cc)
64 : "d" (__fc), "d" (__schid), "d" (__mask) : "cc");
65 return cc;
68 /**
69 * do_siga_output - perform SIGA-w/wt function
70 * @schid: subchannel id or in case of QEBSM the subchannel token
71 * @mask: which output queues to process
72 * @bb: busy bit indicator, set only if SIGA-w/wt could not access a buffer
73 * @fc: function code to perform
75 * Returns condition code.
76 * Note: For IQDC unicast queues only the highest priority queue is processed.
78 static inline int do_siga_output(unsigned long schid, unsigned long mask,
79 unsigned int *bb, unsigned int fc,
80 unsigned long aob)
82 register unsigned long __fc asm("0") = fc;
83 register unsigned long __schid asm("1") = schid;
84 register unsigned long __mask asm("2") = mask;
85 register unsigned long __aob asm("3") = aob;
86 int cc;
88 asm volatile(
89 " siga 0\n"
90 " ipm %0\n"
91 " srl %0,28\n"
92 : "=d" (cc), "+d" (__fc), "+d" (__aob)
93 : "d" (__schid), "d" (__mask)
94 : "cc");
95 *bb = __fc >> 31;
96 return cc;
99 static inline int qdio_check_ccq(struct qdio_q *q, unsigned int ccq)
101 /* all done or next buffer state different */
102 if (ccq == 0 || ccq == 32)
103 return 0;
104 /* no buffer processed */
105 if (ccq == 97)
106 return 1;
107 /* not all buffers processed */
108 if (ccq == 96)
109 return 2;
110 /* notify devices immediately */
111 DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq);
112 return -EIO;
116 * qdio_do_eqbs - extract buffer states for QEBSM
117 * @q: queue to manipulate
118 * @state: state of the extracted buffers
119 * @start: buffer number to start at
120 * @count: count of buffers to examine
121 * @auto_ack: automatically acknowledge buffers
123 * Returns the number of successfully extracted equal buffer states.
124 * Stops processing if a state is different from the last buffers state.
126 static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state,
127 int start, int count, int auto_ack)
129 int rc, tmp_count = count, tmp_start = start, nr = q->nr, retried = 0;
130 unsigned int ccq = 0;
132 qperf_inc(q, eqbs);
134 if (!q->is_input_q)
135 nr += q->irq_ptr->nr_input_qs;
136 again:
137 ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count,
138 auto_ack);
139 rc = qdio_check_ccq(q, ccq);
140 if (!rc)
141 return count - tmp_count;
143 if (rc == 1) {
144 DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS again:%2d", ccq);
145 goto again;
148 if (rc == 2) {
149 qperf_inc(q, eqbs_partial);
150 DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS part:%02x",
151 tmp_count);
153 * Retry once, if that fails bail out and process the
154 * extracted buffers before trying again.
156 if (!retried++)
157 goto again;
158 else
159 return count - tmp_count;
162 DBF_ERROR("%4x EQBS ERROR", SCH_NO(q));
163 DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
164 q->handler(q->irq_ptr->cdev, QDIO_ERROR_GET_BUF_STATE,
165 q->nr, q->first_to_kick, count, q->irq_ptr->int_parm);
166 return 0;
170 * qdio_do_sqbs - set buffer states for QEBSM
171 * @q: queue to manipulate
172 * @state: new state of the buffers
173 * @start: first buffer number to change
174 * @count: how many buffers to change
176 * Returns the number of successfully changed buffers.
177 * Does retrying until the specified count of buffer states is set or an
178 * error occurs.
180 static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start,
181 int count)
183 unsigned int ccq = 0;
184 int tmp_count = count, tmp_start = start;
185 int nr = q->nr;
186 int rc;
188 if (!count)
189 return 0;
190 qperf_inc(q, sqbs);
192 if (!q->is_input_q)
193 nr += q->irq_ptr->nr_input_qs;
194 again:
195 ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count);
196 rc = qdio_check_ccq(q, ccq);
197 if (!rc) {
198 WARN_ON_ONCE(tmp_count);
199 return count - tmp_count;
202 if (rc == 1 || rc == 2) {
203 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "SQBS again:%2d", ccq);
204 qperf_inc(q, sqbs_partial);
205 goto again;
208 DBF_ERROR("%4x SQBS ERROR", SCH_NO(q));
209 DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
210 q->handler(q->irq_ptr->cdev, QDIO_ERROR_SET_BUF_STATE,
211 q->nr, q->first_to_kick, count, q->irq_ptr->int_parm);
212 return 0;
215 /* returns number of examined buffers and their common state in *state */
216 static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr,
217 unsigned char *state, unsigned int count,
218 int auto_ack, int merge_pending)
220 unsigned char __state = 0;
221 int i;
223 if (is_qebsm(q))
224 return qdio_do_eqbs(q, state, bufnr, count, auto_ack);
226 for (i = 0; i < count; i++) {
227 if (!__state) {
228 __state = q->slsb.val[bufnr];
229 if (merge_pending && __state == SLSB_P_OUTPUT_PENDING)
230 __state = SLSB_P_OUTPUT_EMPTY;
231 } else if (merge_pending) {
232 if ((q->slsb.val[bufnr] & __state) != __state)
233 break;
234 } else if (q->slsb.val[bufnr] != __state)
235 break;
236 bufnr = next_buf(bufnr);
238 *state = __state;
239 return i;
242 static inline int get_buf_state(struct qdio_q *q, unsigned int bufnr,
243 unsigned char *state, int auto_ack)
245 return get_buf_states(q, bufnr, state, 1, auto_ack, 0);
248 /* wrap-around safe setting of slsb states, returns number of changed buffers */
249 static inline int set_buf_states(struct qdio_q *q, int bufnr,
250 unsigned char state, int count)
252 int i;
254 if (is_qebsm(q))
255 return qdio_do_sqbs(q, state, bufnr, count);
257 for (i = 0; i < count; i++) {
258 xchg(&q->slsb.val[bufnr], state);
259 bufnr = next_buf(bufnr);
261 return count;
264 static inline int set_buf_state(struct qdio_q *q, int bufnr,
265 unsigned char state)
267 return set_buf_states(q, bufnr, state, 1);
270 /* set slsb states to initial state */
271 static void qdio_init_buf_states(struct qdio_irq *irq_ptr)
273 struct qdio_q *q;
274 int i;
276 for_each_input_queue(irq_ptr, q, i)
277 set_buf_states(q, 0, SLSB_P_INPUT_NOT_INIT,
278 QDIO_MAX_BUFFERS_PER_Q);
279 for_each_output_queue(irq_ptr, q, i)
280 set_buf_states(q, 0, SLSB_P_OUTPUT_NOT_INIT,
281 QDIO_MAX_BUFFERS_PER_Q);
284 static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output,
285 unsigned int input)
287 unsigned long schid = *((u32 *) &q->irq_ptr->schid);
288 unsigned int fc = QDIO_SIGA_SYNC;
289 int cc;
291 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr);
292 qperf_inc(q, siga_sync);
294 if (is_qebsm(q)) {
295 schid = q->irq_ptr->sch_token;
296 fc |= QDIO_SIGA_QEBSM_FLAG;
299 cc = do_siga_sync(schid, output, input, fc);
300 if (unlikely(cc))
301 DBF_ERROR("%4x SIGA-S:%2d", SCH_NO(q), cc);
302 return (cc) ? -EIO : 0;
305 static inline int qdio_siga_sync_q(struct qdio_q *q)
307 if (q->is_input_q)
308 return qdio_siga_sync(q, 0, q->mask);
309 else
310 return qdio_siga_sync(q, q->mask, 0);
313 static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit,
314 unsigned long aob)
316 unsigned long schid = *((u32 *) &q->irq_ptr->schid);
317 unsigned int fc = QDIO_SIGA_WRITE;
318 u64 start_time = 0;
319 int retries = 0, cc;
320 unsigned long laob = 0;
322 WARN_ON_ONCE(aob && ((queue_type(q) != QDIO_IQDIO_QFMT) ||
323 !q->u.out.use_cq));
324 if (q->u.out.use_cq && aob != 0) {
325 fc = QDIO_SIGA_WRITEQ;
326 laob = aob;
329 if (is_qebsm(q)) {
330 schid = q->irq_ptr->sch_token;
331 fc |= QDIO_SIGA_QEBSM_FLAG;
333 again:
334 cc = do_siga_output(schid, q->mask, busy_bit, fc, laob);
336 /* hipersocket busy condition */
337 if (unlikely(*busy_bit)) {
338 retries++;
340 if (!start_time) {
341 start_time = get_tod_clock_fast();
342 goto again;
344 if (get_tod_clock_fast() - start_time < QDIO_BUSY_BIT_PATIENCE)
345 goto again;
347 if (retries) {
348 DBF_DEV_EVENT(DBF_WARN, q->irq_ptr,
349 "%4x cc2 BB1:%1d", SCH_NO(q), q->nr);
350 DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "count:%u", retries);
352 return cc;
355 static inline int qdio_siga_input(struct qdio_q *q)
357 unsigned long schid = *((u32 *) &q->irq_ptr->schid);
358 unsigned int fc = QDIO_SIGA_READ;
359 int cc;
361 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr);
362 qperf_inc(q, siga_read);
364 if (is_qebsm(q)) {
365 schid = q->irq_ptr->sch_token;
366 fc |= QDIO_SIGA_QEBSM_FLAG;
369 cc = do_siga_input(schid, q->mask, fc);
370 if (unlikely(cc))
371 DBF_ERROR("%4x SIGA-R:%2d", SCH_NO(q), cc);
372 return (cc) ? -EIO : 0;
375 #define qdio_siga_sync_out(q) qdio_siga_sync(q, ~0U, 0)
376 #define qdio_siga_sync_all(q) qdio_siga_sync(q, ~0U, ~0U)
378 static inline void qdio_sync_queues(struct qdio_q *q)
380 /* PCI capable outbound queues will also be scanned so sync them too */
381 if (pci_out_supported(q))
382 qdio_siga_sync_all(q);
383 else
384 qdio_siga_sync_q(q);
387 int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
388 unsigned char *state)
390 if (need_siga_sync(q))
391 qdio_siga_sync_q(q);
392 return get_buf_states(q, bufnr, state, 1, 0, 0);
395 static inline void qdio_stop_polling(struct qdio_q *q)
397 if (!q->u.in.polling)
398 return;
400 q->u.in.polling = 0;
401 qperf_inc(q, stop_polling);
403 /* show the card that we are not polling anymore */
404 if (is_qebsm(q)) {
405 set_buf_states(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT,
406 q->u.in.ack_count);
407 q->u.in.ack_count = 0;
408 } else
409 set_buf_state(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT);
412 static inline void account_sbals(struct qdio_q *q, unsigned int count)
414 int pos;
416 q->q_stats.nr_sbal_total += count;
417 if (count == QDIO_MAX_BUFFERS_MASK) {
418 q->q_stats.nr_sbals[7]++;
419 return;
421 pos = ilog2(count);
422 q->q_stats.nr_sbals[pos]++;
425 static void process_buffer_error(struct qdio_q *q, int count)
427 unsigned char state = (q->is_input_q) ? SLSB_P_INPUT_NOT_INIT :
428 SLSB_P_OUTPUT_NOT_INIT;
430 q->qdio_error = QDIO_ERROR_SLSB_STATE;
432 /* special handling for no target buffer empty */
433 if ((!q->is_input_q &&
434 (q->sbal[q->first_to_check]->element[15].sflags) == 0x10)) {
435 qperf_inc(q, target_full);
436 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x",
437 q->first_to_check);
438 goto set;
441 DBF_ERROR("%4x BUF ERROR", SCH_NO(q));
442 DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr);
443 DBF_ERROR("FTC:%3d C:%3d", q->first_to_check, count);
444 DBF_ERROR("F14:%2x F15:%2x",
445 q->sbal[q->first_to_check]->element[14].sflags,
446 q->sbal[q->first_to_check]->element[15].sflags);
448 set:
450 * Interrupts may be avoided as long as the error is present
451 * so change the buffer state immediately to avoid starvation.
453 set_buf_states(q, q->first_to_check, state, count);
456 static inline void inbound_primed(struct qdio_q *q, int count)
458 int new;
460 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in prim:%1d %02x", q->nr, count);
462 /* for QEBSM the ACK was already set by EQBS */
463 if (is_qebsm(q)) {
464 if (!q->u.in.polling) {
465 q->u.in.polling = 1;
466 q->u.in.ack_count = count;
467 q->u.in.ack_start = q->first_to_check;
468 return;
471 /* delete the previous ACK's */
472 set_buf_states(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT,
473 q->u.in.ack_count);
474 q->u.in.ack_count = count;
475 q->u.in.ack_start = q->first_to_check;
476 return;
480 * ACK the newest buffer. The ACK will be removed in qdio_stop_polling
481 * or by the next inbound run.
483 new = add_buf(q->first_to_check, count - 1);
484 if (q->u.in.polling) {
485 /* reset the previous ACK but first set the new one */
486 set_buf_state(q, new, SLSB_P_INPUT_ACK);
487 set_buf_state(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT);
488 } else {
489 q->u.in.polling = 1;
490 set_buf_state(q, new, SLSB_P_INPUT_ACK);
493 q->u.in.ack_start = new;
494 count--;
495 if (!count)
496 return;
497 /* need to change ALL buffers to get more interrupts */
498 set_buf_states(q, q->first_to_check, SLSB_P_INPUT_NOT_INIT, count);
501 static int get_inbound_buffer_frontier(struct qdio_q *q)
503 int count, stop;
504 unsigned char state = 0;
506 q->timestamp = get_tod_clock_fast();
509 * Don't check 128 buffers, as otherwise qdio_inbound_q_moved
510 * would return 0.
512 count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK);
513 stop = add_buf(q->first_to_check, count);
515 if (q->first_to_check == stop)
516 goto out;
519 * No siga sync here, as a PCI or we after a thin interrupt
520 * already sync'ed the queues.
522 count = get_buf_states(q, q->first_to_check, &state, count, 1, 0);
523 if (!count)
524 goto out;
526 switch (state) {
527 case SLSB_P_INPUT_PRIMED:
528 inbound_primed(q, count);
529 q->first_to_check = add_buf(q->first_to_check, count);
530 if (atomic_sub_return(count, &q->nr_buf_used) == 0)
531 qperf_inc(q, inbound_queue_full);
532 if (q->irq_ptr->perf_stat_enabled)
533 account_sbals(q, count);
534 break;
535 case SLSB_P_INPUT_ERROR:
536 process_buffer_error(q, count);
537 q->first_to_check = add_buf(q->first_to_check, count);
538 atomic_sub(count, &q->nr_buf_used);
539 if (q->irq_ptr->perf_stat_enabled)
540 account_sbals_error(q, count);
541 break;
542 case SLSB_CU_INPUT_EMPTY:
543 case SLSB_P_INPUT_NOT_INIT:
544 case SLSB_P_INPUT_ACK:
545 if (q->irq_ptr->perf_stat_enabled)
546 q->q_stats.nr_sbal_nop++;
547 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in nop:%1d %#02x",
548 q->nr, q->first_to_check);
549 break;
550 default:
551 WARN_ON_ONCE(1);
553 out:
554 return q->first_to_check;
557 static int qdio_inbound_q_moved(struct qdio_q *q)
559 int bufnr;
561 bufnr = get_inbound_buffer_frontier(q);
563 if (bufnr != q->last_move) {
564 q->last_move = bufnr;
565 if (!is_thinint_irq(q->irq_ptr) && MACHINE_IS_LPAR)
566 q->u.in.timestamp = get_tod_clock();
567 return 1;
568 } else
569 return 0;
572 static inline int qdio_inbound_q_done(struct qdio_q *q)
574 unsigned char state = 0;
576 if (!atomic_read(&q->nr_buf_used))
577 return 1;
579 if (need_siga_sync(q))
580 qdio_siga_sync_q(q);
581 get_buf_state(q, q->first_to_check, &state, 0);
583 if (state == SLSB_P_INPUT_PRIMED || state == SLSB_P_INPUT_ERROR)
584 /* more work coming */
585 return 0;
587 if (is_thinint_irq(q->irq_ptr))
588 return 1;
590 /* don't poll under z/VM */
591 if (MACHINE_IS_VM)
592 return 1;
595 * At this point we know, that inbound first_to_check
596 * has (probably) not moved (see qdio_inbound_processing).
598 if (get_tod_clock_fast() > q->u.in.timestamp + QDIO_INPUT_THRESHOLD) {
599 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in done:%02x",
600 q->first_to_check);
601 return 1;
602 } else
603 return 0;
606 static inline int contains_aobs(struct qdio_q *q)
608 return !q->is_input_q && q->u.out.use_cq;
611 static inline void qdio_handle_aobs(struct qdio_q *q, int start, int count)
613 unsigned char state = 0;
614 int j, b = start;
616 if (!contains_aobs(q))
617 return;
619 for (j = 0; j < count; ++j) {
620 get_buf_state(q, b, &state, 0);
621 if (state == SLSB_P_OUTPUT_PENDING) {
622 struct qaob *aob = q->u.out.aobs[b];
623 if (aob == NULL)
624 continue;
626 q->u.out.sbal_state[b].flags |=
627 QDIO_OUTBUF_STATE_FLAG_PENDING;
628 q->u.out.aobs[b] = NULL;
629 } else if (state == SLSB_P_OUTPUT_EMPTY) {
630 q->u.out.sbal_state[b].aob = NULL;
632 b = next_buf(b);
636 static inline unsigned long qdio_aob_for_buffer(struct qdio_output_q *q,
637 int bufnr)
639 unsigned long phys_aob = 0;
641 if (!q->use_cq)
642 goto out;
644 if (!q->aobs[bufnr]) {
645 struct qaob *aob = qdio_allocate_aob();
646 q->aobs[bufnr] = aob;
648 if (q->aobs[bufnr]) {
649 q->sbal_state[bufnr].flags = QDIO_OUTBUF_STATE_FLAG_NONE;
650 q->sbal_state[bufnr].aob = q->aobs[bufnr];
651 q->aobs[bufnr]->user1 = (u64) q->sbal_state[bufnr].user;
652 phys_aob = virt_to_phys(q->aobs[bufnr]);
653 WARN_ON_ONCE(phys_aob & 0xFF);
656 out:
657 return phys_aob;
660 static void qdio_kick_handler(struct qdio_q *q)
662 int start = q->first_to_kick;
663 int end = q->first_to_check;
664 int count;
666 if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE))
667 return;
669 count = sub_buf(end, start);
671 if (q->is_input_q) {
672 qperf_inc(q, inbound_handler);
673 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count);
674 } else {
675 qperf_inc(q, outbound_handler);
676 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x",
677 start, count);
680 qdio_handle_aobs(q, start, count);
682 q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count,
683 q->irq_ptr->int_parm);
685 /* for the next time */
686 q->first_to_kick = end;
687 q->qdio_error = 0;
690 static inline int qdio_tasklet_schedule(struct qdio_q *q)
692 if (likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) {
693 tasklet_schedule(&q->tasklet);
694 return 0;
696 return -EPERM;
699 static void __qdio_inbound_processing(struct qdio_q *q)
701 qperf_inc(q, tasklet_inbound);
703 if (!qdio_inbound_q_moved(q))
704 return;
706 qdio_kick_handler(q);
708 if (!qdio_inbound_q_done(q)) {
709 /* means poll time is not yet over */
710 qperf_inc(q, tasklet_inbound_resched);
711 if (!qdio_tasklet_schedule(q))
712 return;
715 qdio_stop_polling(q);
717 * We need to check again to not lose initiative after
718 * resetting the ACK state.
720 if (!qdio_inbound_q_done(q)) {
721 qperf_inc(q, tasklet_inbound_resched2);
722 qdio_tasklet_schedule(q);
726 void qdio_inbound_processing(unsigned long data)
728 struct qdio_q *q = (struct qdio_q *)data;
729 __qdio_inbound_processing(q);
732 static int get_outbound_buffer_frontier(struct qdio_q *q)
734 int count, stop;
735 unsigned char state = 0;
737 q->timestamp = get_tod_clock_fast();
739 if (need_siga_sync(q))
740 if (((queue_type(q) != QDIO_IQDIO_QFMT) &&
741 !pci_out_supported(q)) ||
742 (queue_type(q) == QDIO_IQDIO_QFMT &&
743 multicast_outbound(q)))
744 qdio_siga_sync_q(q);
747 * Don't check 128 buffers, as otherwise qdio_inbound_q_moved
748 * would return 0.
750 count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK);
751 stop = add_buf(q->first_to_check, count);
752 if (q->first_to_check == stop)
753 goto out;
755 count = get_buf_states(q, q->first_to_check, &state, count, 0, 1);
756 if (!count)
757 goto out;
759 switch (state) {
760 case SLSB_P_OUTPUT_EMPTY:
761 /* the adapter got it */
762 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr,
763 "out empty:%1d %02x", q->nr, count);
765 atomic_sub(count, &q->nr_buf_used);
766 q->first_to_check = add_buf(q->first_to_check, count);
767 if (q->irq_ptr->perf_stat_enabled)
768 account_sbals(q, count);
770 break;
771 case SLSB_P_OUTPUT_ERROR:
772 process_buffer_error(q, count);
773 q->first_to_check = add_buf(q->first_to_check, count);
774 atomic_sub(count, &q->nr_buf_used);
775 if (q->irq_ptr->perf_stat_enabled)
776 account_sbals_error(q, count);
777 break;
778 case SLSB_CU_OUTPUT_PRIMED:
779 /* the adapter has not fetched the output yet */
780 if (q->irq_ptr->perf_stat_enabled)
781 q->q_stats.nr_sbal_nop++;
782 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out primed:%1d",
783 q->nr);
784 break;
785 case SLSB_P_OUTPUT_NOT_INIT:
786 case SLSB_P_OUTPUT_HALTED:
787 break;
788 default:
789 WARN_ON_ONCE(1);
792 out:
793 return q->first_to_check;
796 /* all buffers processed? */
797 static inline int qdio_outbound_q_done(struct qdio_q *q)
799 return atomic_read(&q->nr_buf_used) == 0;
802 static inline int qdio_outbound_q_moved(struct qdio_q *q)
804 int bufnr;
806 bufnr = get_outbound_buffer_frontier(q);
808 if (bufnr != q->last_move) {
809 q->last_move = bufnr;
810 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out moved:%1d", q->nr);
811 return 1;
812 } else
813 return 0;
816 static int qdio_kick_outbound_q(struct qdio_q *q, unsigned long aob)
818 int retries = 0, cc;
819 unsigned int busy_bit;
821 if (!need_siga_out(q))
822 return 0;
824 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w:%1d", q->nr);
825 retry:
826 qperf_inc(q, siga_write);
828 cc = qdio_siga_output(q, &busy_bit, aob);
829 switch (cc) {
830 case 0:
831 break;
832 case 2:
833 if (busy_bit) {
834 while (++retries < QDIO_BUSY_BIT_RETRIES) {
835 mdelay(QDIO_BUSY_BIT_RETRY_DELAY);
836 goto retry;
838 DBF_ERROR("%4x cc2 BBC:%1d", SCH_NO(q), q->nr);
839 cc = -EBUSY;
840 } else {
841 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w cc2:%1d", q->nr);
842 cc = -ENOBUFS;
844 break;
845 case 1:
846 case 3:
847 DBF_ERROR("%4x SIGA-W:%1d", SCH_NO(q), cc);
848 cc = -EIO;
849 break;
851 if (retries) {
852 DBF_ERROR("%4x cc2 BB2:%1d", SCH_NO(q), q->nr);
853 DBF_ERROR("count:%u", retries);
855 return cc;
858 static void __qdio_outbound_processing(struct qdio_q *q)
860 qperf_inc(q, tasklet_outbound);
861 WARN_ON_ONCE(atomic_read(&q->nr_buf_used) < 0);
863 if (qdio_outbound_q_moved(q))
864 qdio_kick_handler(q);
866 if (queue_type(q) == QDIO_ZFCP_QFMT)
867 if (!pci_out_supported(q) && !qdio_outbound_q_done(q))
868 goto sched;
870 if (q->u.out.pci_out_enabled)
871 return;
874 * Now we know that queue type is either qeth without pci enabled
875 * or HiperSockets. Make sure buffer switch from PRIMED to EMPTY
876 * is noticed and outbound_handler is called after some time.
878 if (qdio_outbound_q_done(q))
879 del_timer_sync(&q->u.out.timer);
880 else
881 if (!timer_pending(&q->u.out.timer) &&
882 likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE))
883 mod_timer(&q->u.out.timer, jiffies + 10 * HZ);
884 return;
886 sched:
887 qdio_tasklet_schedule(q);
890 /* outbound tasklet */
891 void qdio_outbound_processing(unsigned long data)
893 struct qdio_q *q = (struct qdio_q *)data;
894 __qdio_outbound_processing(q);
897 void qdio_outbound_timer(unsigned long data)
899 struct qdio_q *q = (struct qdio_q *)data;
901 qdio_tasklet_schedule(q);
904 static inline void qdio_check_outbound_after_thinint(struct qdio_q *q)
906 struct qdio_q *out;
907 int i;
909 if (!pci_out_supported(q))
910 return;
912 for_each_output_queue(q->irq_ptr, out, i)
913 if (!qdio_outbound_q_done(out))
914 qdio_tasklet_schedule(out);
917 static void __tiqdio_inbound_processing(struct qdio_q *q)
919 qperf_inc(q, tasklet_inbound);
920 if (need_siga_sync(q) && need_siga_sync_after_ai(q))
921 qdio_sync_queues(q);
924 * The interrupt could be caused by a PCI request. Check the
925 * PCI capable outbound queues.
927 qdio_check_outbound_after_thinint(q);
929 if (!qdio_inbound_q_moved(q))
930 return;
932 qdio_kick_handler(q);
934 if (!qdio_inbound_q_done(q)) {
935 qperf_inc(q, tasklet_inbound_resched);
936 if (!qdio_tasklet_schedule(q))
937 return;
940 qdio_stop_polling(q);
942 * We need to check again to not lose initiative after
943 * resetting the ACK state.
945 if (!qdio_inbound_q_done(q)) {
946 qperf_inc(q, tasklet_inbound_resched2);
947 qdio_tasklet_schedule(q);
951 void tiqdio_inbound_processing(unsigned long data)
953 struct qdio_q *q = (struct qdio_q *)data;
954 __tiqdio_inbound_processing(q);
957 static inline void qdio_set_state(struct qdio_irq *irq_ptr,
958 enum qdio_irq_states state)
960 DBF_DEV_EVENT(DBF_INFO, irq_ptr, "newstate: %1d", state);
962 irq_ptr->state = state;
963 mb();
966 static void qdio_irq_check_sense(struct qdio_irq *irq_ptr, struct irb *irb)
968 if (irb->esw.esw0.erw.cons) {
969 DBF_ERROR("%4x sense:", irq_ptr->schid.sch_no);
970 DBF_ERROR_HEX(irb, 64);
971 DBF_ERROR_HEX(irb->ecw, 64);
975 /* PCI interrupt handler */
976 static void qdio_int_handler_pci(struct qdio_irq *irq_ptr)
978 int i;
979 struct qdio_q *q;
981 if (unlikely(irq_ptr->state != QDIO_IRQ_STATE_ACTIVE))
982 return;
984 for_each_input_queue(irq_ptr, q, i) {
985 if (q->u.in.queue_start_poll) {
986 /* skip if polling is enabled or already in work */
987 if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED,
988 &q->u.in.queue_irq_state)) {
989 qperf_inc(q, int_discarded);
990 continue;
992 q->u.in.queue_start_poll(q->irq_ptr->cdev, q->nr,
993 q->irq_ptr->int_parm);
994 } else {
995 tasklet_schedule(&q->tasklet);
999 if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED))
1000 return;
1002 for_each_output_queue(irq_ptr, q, i) {
1003 if (qdio_outbound_q_done(q))
1004 continue;
1005 if (need_siga_sync(q) && need_siga_sync_out_after_pci(q))
1006 qdio_siga_sync_q(q);
1007 qdio_tasklet_schedule(q);
1011 static void qdio_handle_activate_check(struct ccw_device *cdev,
1012 unsigned long intparm, int cstat, int dstat)
1014 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1015 struct qdio_q *q;
1016 int count;
1018 DBF_ERROR("%4x ACT CHECK", irq_ptr->schid.sch_no);
1019 DBF_ERROR("intp :%lx", intparm);
1020 DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
1022 if (irq_ptr->nr_input_qs) {
1023 q = irq_ptr->input_qs[0];
1024 } else if (irq_ptr->nr_output_qs) {
1025 q = irq_ptr->output_qs[0];
1026 } else {
1027 dump_stack();
1028 goto no_handler;
1031 count = sub_buf(q->first_to_check, q->first_to_kick);
1032 q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE,
1033 q->nr, q->first_to_kick, count, irq_ptr->int_parm);
1034 no_handler:
1035 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
1037 * In case of z/VM LGR (Live Guest Migration) QDIO recovery will happen.
1038 * Therefore we call the LGR detection function here.
1040 lgr_info_log();
1043 static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat,
1044 int dstat)
1046 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1048 DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
1050 if (cstat)
1051 goto error;
1052 if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END))
1053 goto error;
1054 if (!(dstat & DEV_STAT_DEV_END))
1055 goto error;
1056 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
1057 return;
1059 error:
1060 DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no);
1061 DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
1062 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
1065 /* qdio interrupt handler */
1066 void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
1067 struct irb *irb)
1069 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1070 struct subchannel_id schid;
1071 int cstat, dstat;
1073 if (!intparm || !irq_ptr) {
1074 ccw_device_get_schid(cdev, &schid);
1075 DBF_ERROR("qint:%4x", schid.sch_no);
1076 return;
1079 if (irq_ptr->perf_stat_enabled)
1080 irq_ptr->perf_stat.qdio_int++;
1082 if (IS_ERR(irb)) {
1083 DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
1084 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
1085 wake_up(&cdev->private->wait_q);
1086 return;
1088 qdio_irq_check_sense(irq_ptr, irb);
1089 cstat = irb->scsw.cmd.cstat;
1090 dstat = irb->scsw.cmd.dstat;
1092 switch (irq_ptr->state) {
1093 case QDIO_IRQ_STATE_INACTIVE:
1094 qdio_establish_handle_irq(cdev, cstat, dstat);
1095 break;
1096 case QDIO_IRQ_STATE_CLEANUP:
1097 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
1098 break;
1099 case QDIO_IRQ_STATE_ESTABLISHED:
1100 case QDIO_IRQ_STATE_ACTIVE:
1101 if (cstat & SCHN_STAT_PCI) {
1102 qdio_int_handler_pci(irq_ptr);
1103 return;
1105 if (cstat || dstat)
1106 qdio_handle_activate_check(cdev, intparm, cstat,
1107 dstat);
1108 break;
1109 case QDIO_IRQ_STATE_STOPPED:
1110 break;
1111 default:
1112 WARN_ON_ONCE(1);
1114 wake_up(&cdev->private->wait_q);
1118 * qdio_get_ssqd_desc - get qdio subchannel description
1119 * @cdev: ccw device to get description for
1120 * @data: where to store the ssqd
1122 * Returns 0 or an error code. The results of the chsc are stored in the
1123 * specified structure.
1125 int qdio_get_ssqd_desc(struct ccw_device *cdev,
1126 struct qdio_ssqd_desc *data)
1128 struct subchannel_id schid;
1130 if (!cdev || !cdev->private)
1131 return -EINVAL;
1133 ccw_device_get_schid(cdev, &schid);
1134 DBF_EVENT("get ssqd:%4x", schid.sch_no);
1135 return qdio_setup_get_ssqd(NULL, &schid, data);
1137 EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc);
1139 static void qdio_shutdown_queues(struct ccw_device *cdev)
1141 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1142 struct qdio_q *q;
1143 int i;
1145 for_each_input_queue(irq_ptr, q, i)
1146 tasklet_kill(&q->tasklet);
1148 for_each_output_queue(irq_ptr, q, i) {
1149 del_timer_sync(&q->u.out.timer);
1150 tasklet_kill(&q->tasklet);
1155 * qdio_shutdown - shut down a qdio subchannel
1156 * @cdev: associated ccw device
1157 * @how: use halt or clear to shutdown
1159 int qdio_shutdown(struct ccw_device *cdev, int how)
1161 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1162 struct subchannel_id schid;
1163 int rc;
1165 if (!irq_ptr)
1166 return -ENODEV;
1168 WARN_ON_ONCE(irqs_disabled());
1169 ccw_device_get_schid(cdev, &schid);
1170 DBF_EVENT("qshutdown:%4x", schid.sch_no);
1172 mutex_lock(&irq_ptr->setup_mutex);
1174 * Subchannel was already shot down. We cannot prevent being called
1175 * twice since cio may trigger a shutdown asynchronously.
1177 if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) {
1178 mutex_unlock(&irq_ptr->setup_mutex);
1179 return 0;
1183 * Indicate that the device is going down. Scheduling the queue
1184 * tasklets is forbidden from here on.
1186 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
1188 tiqdio_remove_input_queues(irq_ptr);
1189 qdio_shutdown_queues(cdev);
1190 qdio_shutdown_debug_entries(irq_ptr);
1192 /* cleanup subchannel */
1193 spin_lock_irq(get_ccwdev_lock(cdev));
1195 if (how & QDIO_FLAG_CLEANUP_USING_CLEAR)
1196 rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP);
1197 else
1198 /* default behaviour is halt */
1199 rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP);
1200 if (rc) {
1201 DBF_ERROR("%4x SHUTD ERR", irq_ptr->schid.sch_no);
1202 DBF_ERROR("rc:%4d", rc);
1203 goto no_cleanup;
1206 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP);
1207 spin_unlock_irq(get_ccwdev_lock(cdev));
1208 wait_event_interruptible_timeout(cdev->private->wait_q,
1209 irq_ptr->state == QDIO_IRQ_STATE_INACTIVE ||
1210 irq_ptr->state == QDIO_IRQ_STATE_ERR,
1211 10 * HZ);
1212 spin_lock_irq(get_ccwdev_lock(cdev));
1214 no_cleanup:
1215 qdio_shutdown_thinint(irq_ptr);
1217 /* restore interrupt handler */
1218 if ((void *)cdev->handler == (void *)qdio_int_handler)
1219 cdev->handler = irq_ptr->orig_handler;
1220 spin_unlock_irq(get_ccwdev_lock(cdev));
1222 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
1223 mutex_unlock(&irq_ptr->setup_mutex);
1224 if (rc)
1225 return rc;
1226 return 0;
1228 EXPORT_SYMBOL_GPL(qdio_shutdown);
1231 * qdio_free - free data structures for a qdio subchannel
1232 * @cdev: associated ccw device
1234 int qdio_free(struct ccw_device *cdev)
1236 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1237 struct subchannel_id schid;
1239 if (!irq_ptr)
1240 return -ENODEV;
1242 ccw_device_get_schid(cdev, &schid);
1243 DBF_EVENT("qfree:%4x", schid.sch_no);
1244 DBF_DEV_EVENT(DBF_ERR, irq_ptr, "dbf abandoned");
1245 mutex_lock(&irq_ptr->setup_mutex);
1247 irq_ptr->debug_area = NULL;
1248 cdev->private->qdio_data = NULL;
1249 mutex_unlock(&irq_ptr->setup_mutex);
1251 qdio_release_memory(irq_ptr);
1252 return 0;
1254 EXPORT_SYMBOL_GPL(qdio_free);
1257 * qdio_allocate - allocate qdio queues and associated data
1258 * @init_data: initialization data
1260 int qdio_allocate(struct qdio_initialize *init_data)
1262 struct subchannel_id schid;
1263 struct qdio_irq *irq_ptr;
1265 ccw_device_get_schid(init_data->cdev, &schid);
1266 DBF_EVENT("qallocate:%4x", schid.sch_no);
1268 if ((init_data->no_input_qs && !init_data->input_handler) ||
1269 (init_data->no_output_qs && !init_data->output_handler))
1270 return -EINVAL;
1272 if ((init_data->no_input_qs > QDIO_MAX_QUEUES_PER_IRQ) ||
1273 (init_data->no_output_qs > QDIO_MAX_QUEUES_PER_IRQ))
1274 return -EINVAL;
1276 if ((!init_data->input_sbal_addr_array) ||
1277 (!init_data->output_sbal_addr_array))
1278 return -EINVAL;
1280 /* irq_ptr must be in GFP_DMA since it contains ccw1.cda */
1281 irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
1282 if (!irq_ptr)
1283 goto out_err;
1285 mutex_init(&irq_ptr->setup_mutex);
1286 if (qdio_allocate_dbf(init_data, irq_ptr))
1287 goto out_rel;
1290 * Allocate a page for the chsc calls in qdio_establish.
1291 * Must be pre-allocated since a zfcp recovery will call
1292 * qdio_establish. In case of low memory and swap on a zfcp disk
1293 * we may not be able to allocate memory otherwise.
1295 irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL);
1296 if (!irq_ptr->chsc_page)
1297 goto out_rel;
1299 /* qdr is used in ccw1.cda which is u32 */
1300 irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
1301 if (!irq_ptr->qdr)
1302 goto out_rel;
1304 if (qdio_allocate_qs(irq_ptr, init_data->no_input_qs,
1305 init_data->no_output_qs))
1306 goto out_rel;
1308 init_data->cdev->private->qdio_data = irq_ptr;
1309 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
1310 return 0;
1311 out_rel:
1312 qdio_release_memory(irq_ptr);
1313 out_err:
1314 return -ENOMEM;
1316 EXPORT_SYMBOL_GPL(qdio_allocate);
1318 static void qdio_detect_hsicq(struct qdio_irq *irq_ptr)
1320 struct qdio_q *q = irq_ptr->input_qs[0];
1321 int i, use_cq = 0;
1323 if (irq_ptr->nr_input_qs > 1 && queue_type(q) == QDIO_IQDIO_QFMT)
1324 use_cq = 1;
1326 for_each_output_queue(irq_ptr, q, i) {
1327 if (use_cq) {
1328 if (qdio_enable_async_operation(&q->u.out) < 0) {
1329 use_cq = 0;
1330 continue;
1332 } else
1333 qdio_disable_async_operation(&q->u.out);
1335 DBF_EVENT("use_cq:%d", use_cq);
1339 * qdio_establish - establish queues on a qdio subchannel
1340 * @init_data: initialization data
1342 int qdio_establish(struct qdio_initialize *init_data)
1344 struct ccw_device *cdev = init_data->cdev;
1345 struct subchannel_id schid;
1346 struct qdio_irq *irq_ptr;
1347 int rc;
1349 ccw_device_get_schid(cdev, &schid);
1350 DBF_EVENT("qestablish:%4x", schid.sch_no);
1352 irq_ptr = cdev->private->qdio_data;
1353 if (!irq_ptr)
1354 return -ENODEV;
1356 mutex_lock(&irq_ptr->setup_mutex);
1357 qdio_setup_irq(init_data);
1359 rc = qdio_establish_thinint(irq_ptr);
1360 if (rc) {
1361 mutex_unlock(&irq_ptr->setup_mutex);
1362 qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
1363 return rc;
1366 /* establish q */
1367 irq_ptr->ccw.cmd_code = irq_ptr->equeue.cmd;
1368 irq_ptr->ccw.flags = CCW_FLAG_SLI;
1369 irq_ptr->ccw.count = irq_ptr->equeue.count;
1370 irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr);
1372 spin_lock_irq(get_ccwdev_lock(cdev));
1373 ccw_device_set_options_mask(cdev, 0);
1375 rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0);
1376 spin_unlock_irq(get_ccwdev_lock(cdev));
1377 if (rc) {
1378 DBF_ERROR("%4x est IO ERR", irq_ptr->schid.sch_no);
1379 DBF_ERROR("rc:%4x", rc);
1380 mutex_unlock(&irq_ptr->setup_mutex);
1381 qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
1382 return rc;
1385 wait_event_interruptible_timeout(cdev->private->wait_q,
1386 irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED ||
1387 irq_ptr->state == QDIO_IRQ_STATE_ERR, HZ);
1389 if (irq_ptr->state != QDIO_IRQ_STATE_ESTABLISHED) {
1390 mutex_unlock(&irq_ptr->setup_mutex);
1391 qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
1392 return -EIO;
1395 qdio_setup_ssqd_info(irq_ptr);
1397 qdio_detect_hsicq(irq_ptr);
1399 /* qebsm is now setup if available, initialize buffer states */
1400 qdio_init_buf_states(irq_ptr);
1402 mutex_unlock(&irq_ptr->setup_mutex);
1403 qdio_print_subchannel_info(irq_ptr, cdev);
1404 qdio_setup_debug_entries(irq_ptr, cdev);
1405 return 0;
1407 EXPORT_SYMBOL_GPL(qdio_establish);
1410 * qdio_activate - activate queues on a qdio subchannel
1411 * @cdev: associated cdev
1413 int qdio_activate(struct ccw_device *cdev)
1415 struct subchannel_id schid;
1416 struct qdio_irq *irq_ptr;
1417 int rc;
1419 ccw_device_get_schid(cdev, &schid);
1420 DBF_EVENT("qactivate:%4x", schid.sch_no);
1422 irq_ptr = cdev->private->qdio_data;
1423 if (!irq_ptr)
1424 return -ENODEV;
1426 mutex_lock(&irq_ptr->setup_mutex);
1427 if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) {
1428 rc = -EBUSY;
1429 goto out;
1432 irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd;
1433 irq_ptr->ccw.flags = CCW_FLAG_SLI;
1434 irq_ptr->ccw.count = irq_ptr->aqueue.count;
1435 irq_ptr->ccw.cda = 0;
1437 spin_lock_irq(get_ccwdev_lock(cdev));
1438 ccw_device_set_options(cdev, CCWDEV_REPORT_ALL);
1440 rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE,
1441 0, DOIO_DENY_PREFETCH);
1442 spin_unlock_irq(get_ccwdev_lock(cdev));
1443 if (rc) {
1444 DBF_ERROR("%4x act IO ERR", irq_ptr->schid.sch_no);
1445 DBF_ERROR("rc:%4x", rc);
1446 goto out;
1449 if (is_thinint_irq(irq_ptr))
1450 tiqdio_add_input_queues(irq_ptr);
1452 /* wait for subchannel to become active */
1453 msleep(5);
1455 switch (irq_ptr->state) {
1456 case QDIO_IRQ_STATE_STOPPED:
1457 case QDIO_IRQ_STATE_ERR:
1458 rc = -EIO;
1459 break;
1460 default:
1461 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE);
1462 rc = 0;
1464 out:
1465 mutex_unlock(&irq_ptr->setup_mutex);
1466 return rc;
1468 EXPORT_SYMBOL_GPL(qdio_activate);
1470 static inline int buf_in_between(int bufnr, int start, int count)
1472 int end = add_buf(start, count);
1474 if (end > start) {
1475 if (bufnr >= start && bufnr < end)
1476 return 1;
1477 else
1478 return 0;
1481 /* wrap-around case */
1482 if ((bufnr >= start && bufnr <= QDIO_MAX_BUFFERS_PER_Q) ||
1483 (bufnr < end))
1484 return 1;
1485 else
1486 return 0;
1490 * handle_inbound - reset processed input buffers
1491 * @q: queue containing the buffers
1492 * @callflags: flags
1493 * @bufnr: first buffer to process
1494 * @count: how many buffers are emptied
1496 static int handle_inbound(struct qdio_q *q, unsigned int callflags,
1497 int bufnr, int count)
1499 int diff;
1501 qperf_inc(q, inbound_call);
1503 if (!q->u.in.polling)
1504 goto set;
1506 /* protect against stop polling setting an ACK for an emptied slsb */
1507 if (count == QDIO_MAX_BUFFERS_PER_Q) {
1508 /* overwriting everything, just delete polling status */
1509 q->u.in.polling = 0;
1510 q->u.in.ack_count = 0;
1511 goto set;
1512 } else if (buf_in_between(q->u.in.ack_start, bufnr, count)) {
1513 if (is_qebsm(q)) {
1514 /* partial overwrite, just update ack_start */
1515 diff = add_buf(bufnr, count);
1516 diff = sub_buf(diff, q->u.in.ack_start);
1517 q->u.in.ack_count -= diff;
1518 if (q->u.in.ack_count <= 0) {
1519 q->u.in.polling = 0;
1520 q->u.in.ack_count = 0;
1521 goto set;
1523 q->u.in.ack_start = add_buf(q->u.in.ack_start, diff);
1525 else
1526 /* the only ACK will be deleted, so stop polling */
1527 q->u.in.polling = 0;
1530 set:
1531 count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count);
1532 atomic_add(count, &q->nr_buf_used);
1534 if (need_siga_in(q))
1535 return qdio_siga_input(q);
1537 return 0;
1541 * handle_outbound - process filled outbound buffers
1542 * @q: queue containing the buffers
1543 * @callflags: flags
1544 * @bufnr: first buffer to process
1545 * @count: how many buffers are filled
1547 static int handle_outbound(struct qdio_q *q, unsigned int callflags,
1548 int bufnr, int count)
1550 unsigned char state = 0;
1551 int used, rc = 0;
1553 qperf_inc(q, outbound_call);
1555 count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count);
1556 used = atomic_add_return(count, &q->nr_buf_used);
1558 if (used == QDIO_MAX_BUFFERS_PER_Q)
1559 qperf_inc(q, outbound_queue_full);
1561 if (callflags & QDIO_FLAG_PCI_OUT) {
1562 q->u.out.pci_out_enabled = 1;
1563 qperf_inc(q, pci_request_int);
1564 } else
1565 q->u.out.pci_out_enabled = 0;
1567 if (queue_type(q) == QDIO_IQDIO_QFMT) {
1568 unsigned long phys_aob = 0;
1570 /* One SIGA-W per buffer required for unicast HSI */
1571 WARN_ON_ONCE(count > 1 && !multicast_outbound(q));
1573 phys_aob = qdio_aob_for_buffer(&q->u.out, bufnr);
1575 rc = qdio_kick_outbound_q(q, phys_aob);
1576 } else if (need_siga_sync(q)) {
1577 rc = qdio_siga_sync_q(q);
1578 } else {
1579 /* try to fast requeue buffers */
1580 get_buf_state(q, prev_buf(bufnr), &state, 0);
1581 if (state != SLSB_CU_OUTPUT_PRIMED)
1582 rc = qdio_kick_outbound_q(q, 0);
1583 else
1584 qperf_inc(q, fast_requeue);
1587 /* in case of SIGA errors we must process the error immediately */
1588 if (used >= q->u.out.scan_threshold || rc)
1589 qdio_tasklet_schedule(q);
1590 else
1591 /* free the SBALs in case of no further traffic */
1592 if (!timer_pending(&q->u.out.timer) &&
1593 likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE))
1594 mod_timer(&q->u.out.timer, jiffies + HZ);
1595 return rc;
1599 * do_QDIO - process input or output buffers
1600 * @cdev: associated ccw_device for the qdio subchannel
1601 * @callflags: input or output and special flags from the program
1602 * @q_nr: queue number
1603 * @bufnr: buffer number
1604 * @count: how many buffers to process
1606 int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
1607 int q_nr, unsigned int bufnr, unsigned int count)
1609 struct qdio_irq *irq_ptr;
1611 if (bufnr >= QDIO_MAX_BUFFERS_PER_Q || count > QDIO_MAX_BUFFERS_PER_Q)
1612 return -EINVAL;
1614 irq_ptr = cdev->private->qdio_data;
1615 if (!irq_ptr)
1616 return -ENODEV;
1618 DBF_DEV_EVENT(DBF_INFO, irq_ptr,
1619 "do%02x b:%02x c:%02x", callflags, bufnr, count);
1621 if (irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)
1622 return -EIO;
1623 if (!count)
1624 return 0;
1625 if (callflags & QDIO_FLAG_SYNC_INPUT)
1626 return handle_inbound(irq_ptr->input_qs[q_nr],
1627 callflags, bufnr, count);
1628 else if (callflags & QDIO_FLAG_SYNC_OUTPUT)
1629 return handle_outbound(irq_ptr->output_qs[q_nr],
1630 callflags, bufnr, count);
1631 return -EINVAL;
1633 EXPORT_SYMBOL_GPL(do_QDIO);
1636 * qdio_start_irq - process input buffers
1637 * @cdev: associated ccw_device for the qdio subchannel
1638 * @nr: input queue number
1640 * Return codes
1641 * 0 - success
1642 * 1 - irqs not started since new data is available
1644 int qdio_start_irq(struct ccw_device *cdev, int nr)
1646 struct qdio_q *q;
1647 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1649 if (!irq_ptr)
1650 return -ENODEV;
1651 q = irq_ptr->input_qs[nr];
1653 clear_nonshared_ind(irq_ptr);
1654 qdio_stop_polling(q);
1655 clear_bit(QDIO_QUEUE_IRQS_DISABLED, &q->u.in.queue_irq_state);
1658 * We need to check again to not lose initiative after
1659 * resetting the ACK state.
1661 if (test_nonshared_ind(irq_ptr))
1662 goto rescan;
1663 if (!qdio_inbound_q_done(q))
1664 goto rescan;
1665 return 0;
1667 rescan:
1668 if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED,
1669 &q->u.in.queue_irq_state))
1670 return 0;
1671 else
1672 return 1;
1675 EXPORT_SYMBOL(qdio_start_irq);
1678 * qdio_get_next_buffers - process input buffers
1679 * @cdev: associated ccw_device for the qdio subchannel
1680 * @nr: input queue number
1681 * @bufnr: first filled buffer number
1682 * @error: buffers are in error state
1684 * Return codes
1685 * < 0 - error
1686 * = 0 - no new buffers found
1687 * > 0 - number of processed buffers
1689 int qdio_get_next_buffers(struct ccw_device *cdev, int nr, int *bufnr,
1690 int *error)
1692 struct qdio_q *q;
1693 int start, end;
1694 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1696 if (!irq_ptr)
1697 return -ENODEV;
1698 q = irq_ptr->input_qs[nr];
1701 * Cannot rely on automatic sync after interrupt since queues may
1702 * also be examined without interrupt.
1704 if (need_siga_sync(q))
1705 qdio_sync_queues(q);
1707 /* check the PCI capable outbound queues. */
1708 qdio_check_outbound_after_thinint(q);
1710 if (!qdio_inbound_q_moved(q))
1711 return 0;
1713 /* Note: upper-layer MUST stop processing immediately here ... */
1714 if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE))
1715 return -EIO;
1717 start = q->first_to_kick;
1718 end = q->first_to_check;
1719 *bufnr = start;
1720 *error = q->qdio_error;
1722 /* for the next time */
1723 q->first_to_kick = end;
1724 q->qdio_error = 0;
1725 return sub_buf(end, start);
1727 EXPORT_SYMBOL(qdio_get_next_buffers);
1730 * qdio_stop_irq - disable interrupt processing for the device
1731 * @cdev: associated ccw_device for the qdio subchannel
1732 * @nr: input queue number
1734 * Return codes
1735 * 0 - interrupts were already disabled
1736 * 1 - interrupts successfully disabled
1738 int qdio_stop_irq(struct ccw_device *cdev, int nr)
1740 struct qdio_q *q;
1741 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1743 if (!irq_ptr)
1744 return -ENODEV;
1745 q = irq_ptr->input_qs[nr];
1747 if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED,
1748 &q->u.in.queue_irq_state))
1749 return 0;
1750 else
1751 return 1;
1753 EXPORT_SYMBOL(qdio_stop_irq);
1756 * qdio_pnso_brinfo() - perform network subchannel op #0 - bridge info.
1757 * @schid: Subchannel ID.
1758 * @cnc: Boolean Change-Notification Control
1759 * @response: Response code will be stored at this address
1760 * @cb: Callback function will be executed for each element
1761 * of the address list
1762 * @priv: Pointer passed from the caller to qdio_pnso_brinfo()
1763 * @type: Type of the address entry passed to the callback
1764 * @entry: Entry containg the address of the specified type
1765 * @priv: Pointer to pass to the callback function.
1767 * Performs "Store-network-bridging-information list" operation and calls
1768 * the callback function for every entry in the list. If "change-
1769 * notification-control" is set, further changes in the address list
1770 * will be reported via the IPA command.
1772 int qdio_pnso_brinfo(struct subchannel_id schid,
1773 int cnc, u16 *response,
1774 void (*cb)(void *priv, enum qdio_brinfo_entry_type type,
1775 void *entry),
1776 void *priv)
1778 struct chsc_pnso_area *rr;
1779 int rc;
1780 u32 prev_instance = 0;
1781 int isfirstblock = 1;
1782 int i, size, elems;
1784 rr = (struct chsc_pnso_area *)get_zeroed_page(GFP_KERNEL);
1785 if (rr == NULL)
1786 return -ENOMEM;
1787 do {
1788 /* on the first iteration, naihdr.resume_token will be zero */
1789 rc = chsc_pnso_brinfo(schid, rr, rr->naihdr.resume_token, cnc);
1790 if (rc != 0 && rc != -EBUSY)
1791 goto out;
1792 if (rr->response.code != 1) {
1793 rc = -EIO;
1794 continue;
1795 } else
1796 rc = 0;
1798 if (cb == NULL)
1799 continue;
1801 size = rr->naihdr.naids;
1802 elems = (rr->response.length -
1803 sizeof(struct chsc_header) -
1804 sizeof(struct chsc_brinfo_naihdr)) /
1805 size;
1807 if (!isfirstblock && (rr->naihdr.instance != prev_instance)) {
1808 /* Inform the caller that they need to scrap */
1809 /* the data that was already reported via cb */
1810 rc = -EAGAIN;
1811 break;
1813 isfirstblock = 0;
1814 prev_instance = rr->naihdr.instance;
1815 for (i = 0; i < elems; i++)
1816 switch (size) {
1817 case sizeof(struct qdio_brinfo_entry_l3_ipv6):
1818 (*cb)(priv, l3_ipv6_addr,
1819 &rr->entries.l3_ipv6[i]);
1820 break;
1821 case sizeof(struct qdio_brinfo_entry_l3_ipv4):
1822 (*cb)(priv, l3_ipv4_addr,
1823 &rr->entries.l3_ipv4[i]);
1824 break;
1825 case sizeof(struct qdio_brinfo_entry_l2):
1826 (*cb)(priv, l2_addr_lnid,
1827 &rr->entries.l2[i]);
1828 break;
1829 default:
1830 WARN_ON_ONCE(1);
1831 rc = -EIO;
1832 goto out;
1834 } while (rr->response.code == 0x0107 || /* channel busy */
1835 (rr->response.code == 1 && /* list stored */
1836 /* resume token is non-zero => list incomplete */
1837 (rr->naihdr.resume_token.t1 || rr->naihdr.resume_token.t2)));
1838 (*response) = rr->response.code;
1840 out:
1841 free_page((unsigned long)rr);
1842 return rc;
1844 EXPORT_SYMBOL_GPL(qdio_pnso_brinfo);
1846 static int __init init_QDIO(void)
1848 int rc;
1850 rc = qdio_debug_init();
1851 if (rc)
1852 return rc;
1853 rc = qdio_setup_init();
1854 if (rc)
1855 goto out_debug;
1856 rc = tiqdio_allocate_memory();
1857 if (rc)
1858 goto out_cache;
1859 rc = tiqdio_register_thinints();
1860 if (rc)
1861 goto out_ti;
1862 return 0;
1864 out_ti:
1865 tiqdio_free_memory();
1866 out_cache:
1867 qdio_setup_exit();
1868 out_debug:
1869 qdio_debug_exit();
1870 return rc;
1873 static void __exit exit_QDIO(void)
1875 tiqdio_unregister_thinints();
1876 tiqdio_free_memory();
1877 qdio_setup_exit();
1878 qdio_debug_exit();
1881 module_init(init_QDIO);
1882 module_exit(exit_QDIO);