2 * Watchdog driver for the SA11x0/PXA2xx
4 * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
5 * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
12 * Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
13 * warranty for any of this software. This material is provided
14 * "AS-IS" and at no charge.
16 * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
18 * 27/11/2000 Initial release
21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
23 #include <linux/module.h>
24 #include <linux/moduleparam.h>
25 #include <linux/clk.h>
26 #include <linux/types.h>
27 #include <linux/kernel.h>
29 #include <linux/miscdevice.h>
30 #include <linux/watchdog.h>
31 #include <linux/init.h>
33 #include <linux/bitops.h>
34 #include <linux/uaccess.h>
35 #include <linux/timex.h>
37 #ifdef CONFIG_ARCH_PXA
38 #include <mach/regs-ost.h>
41 #include <mach/reset.h>
42 #include <mach/hardware.h>
44 static unsigned long oscr_freq
;
45 static unsigned long sa1100wdt_users
;
46 static unsigned int pre_margin
;
47 static int boot_status
;
50 * Allow only one person to hold it open
52 static int sa1100dog_open(struct inode
*inode
, struct file
*file
)
54 if (test_and_set_bit(1, &sa1100wdt_users
))
57 /* Activate SA1100 Watchdog timer */
58 writel_relaxed(readl_relaxed(OSCR
) + pre_margin
, OSMR3
);
59 writel_relaxed(OSSR_M3
, OSSR
);
60 writel_relaxed(OWER_WME
, OWER
);
61 writel_relaxed(readl_relaxed(OIER
) | OIER_E3
, OIER
);
62 return nonseekable_open(inode
, file
);
66 * The watchdog cannot be disabled.
68 * Previous comments suggested that turning off the interrupt by
69 * clearing OIER[E3] would prevent the watchdog timing out but this
70 * does not appear to be true (at least on the PXA255).
72 static int sa1100dog_release(struct inode
*inode
, struct file
*file
)
74 pr_crit("Device closed - timer will not stop\n");
75 clear_bit(1, &sa1100wdt_users
);
79 static ssize_t
sa1100dog_write(struct file
*file
, const char __user
*data
,
80 size_t len
, loff_t
*ppos
)
83 /* Refresh OSMR3 timer. */
84 writel_relaxed(readl_relaxed(OSCR
) + pre_margin
, OSMR3
);
88 static const struct watchdog_info ident
= {
89 .options
= WDIOF_CARDRESET
| WDIOF_SETTIMEOUT
90 | WDIOF_KEEPALIVEPING
,
91 .identity
= "SA1100/PXA255 Watchdog",
92 .firmware_version
= 1,
95 static long sa1100dog_ioctl(struct file
*file
, unsigned int cmd
,
100 void __user
*argp
= (void __user
*)arg
;
101 int __user
*p
= argp
;
104 case WDIOC_GETSUPPORT
:
105 ret
= copy_to_user(argp
, &ident
,
106 sizeof(ident
)) ? -EFAULT
: 0;
109 case WDIOC_GETSTATUS
:
110 ret
= put_user(0, p
);
113 case WDIOC_GETBOOTSTATUS
:
114 ret
= put_user(boot_status
, p
);
117 case WDIOC_KEEPALIVE
:
118 writel_relaxed(readl_relaxed(OSCR
) + pre_margin
, OSMR3
);
122 case WDIOC_SETTIMEOUT
:
123 ret
= get_user(time
, p
);
127 if (time
<= 0 || (oscr_freq
* (long long)time
>= 0xffffffff)) {
132 pre_margin
= oscr_freq
* time
;
133 writel_relaxed(readl_relaxed(OSCR
) + pre_margin
, OSMR3
);
136 case WDIOC_GETTIMEOUT
:
137 ret
= put_user(pre_margin
/ oscr_freq
, p
);
143 static const struct file_operations sa1100dog_fops
= {
144 .owner
= THIS_MODULE
,
146 .write
= sa1100dog_write
,
147 .unlocked_ioctl
= sa1100dog_ioctl
,
148 .open
= sa1100dog_open
,
149 .release
= sa1100dog_release
,
152 static struct miscdevice sa1100dog_miscdev
= {
153 .minor
= WATCHDOG_MINOR
,
155 .fops
= &sa1100dog_fops
,
158 static int margin __initdata
= 60; /* (secs) Default is 1 minute */
159 static struct clk
*clk
;
161 static int __init
sa1100dog_init(void)
165 clk
= clk_get(NULL
, "OSTIMER0");
167 pr_err("SA1100/PXA2xx Watchdog Timer: clock not found: %d\n",
172 ret
= clk_prepare_enable(clk
);
174 pr_err("SA1100/PXA2xx Watchdog Timer: clock failed to prepare+enable: %d\n",
179 oscr_freq
= clk_get_rate(clk
);
182 * Read the reset status, and save it for later. If
183 * we suspend, RCSR will be cleared, and the watchdog
184 * reset reason will be lost.
186 boot_status
= (reset_status
& RESET_STATUS_WATCHDOG
) ?
188 pre_margin
= oscr_freq
* margin
;
190 ret
= misc_register(&sa1100dog_miscdev
);
192 pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
197 clk_disable_unprepare(clk
);
203 static void __exit
sa1100dog_exit(void)
205 misc_deregister(&sa1100dog_miscdev
);
206 clk_disable_unprepare(clk
);
210 module_init(sa1100dog_init
);
211 module_exit(sa1100dog_exit
);
213 MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
214 MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
216 module_param(margin
, int, 0);
217 MODULE_PARM_DESC(margin
, "Watchdog margin in seconds (default 60s)");
219 MODULE_LICENSE("GPL");