?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'fix/pcm-hwptr' into for-linus
[linux/fpc-iii.git] / drivers / media / dvb / dvb-usb / dib0700_devices.c
blob818b2ab584bf927bd00d0e1e369a24c94f2b9bca
1 /* Linux driver for devices based on the DiBcom DiB0700 USB bridge
2 *
3 * This program is free software; you can redistribute it and/or modify it
4 * under the terms of the GNU General Public License as published by the Free
5 * Software Foundation, version 2.
6 *
7 * Copyright (C) 2005-7 DiBcom, SA
8 */
9 #include "dib0700.h"
10
11 #include "dib3000mc.h"
12 #include "dib7000m.h"
13 #include "dib7000p.h"
14 #include "mt2060.h"
15 #include "mt2266.h"
16 #include "tuner-xc2028.h"
17 #include "xc5000.h"
18 #include "s5h1411.h"
19 #include "dib0070.h"
20 #include "lgdt3305.h"
21 #include "mxl5007t.h"
22
23 static int force_lna_activation;
24 module_param(force_lna_activation, int, 0644);
25 MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
26 "if applicable for the device (default: 0=automatic/off).");
27
28 struct dib0700_adapter_state {
29 int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
30 };
31
32 /* Hauppauge Nova-T 500 (aka Bristol)
33 * has a LNA on GPIO0 which is enabled by setting 1 */
34 static struct mt2060_config bristol_mt2060_config[2] = {
35 {
36 .i2c_address = 0x60,
37 .clock_out = 3,
38 }, {
39 .i2c_address = 0x61,
40 }
41 };
42
43
44 static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
45 .band_caps = BAND_VHF | BAND_UHF,
46 .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
47
48 .agc1_max = 42598,
49 .agc1_min = 17694,
50 .agc2_max = 45875,
51 .agc2_min = 0,
52
53 .agc1_pt1 = 0,
54 .agc1_pt2 = 59,
55
56 .agc1_slope1 = 0,
57 .agc1_slope2 = 69,
58
59 .agc2_pt1 = 0,
60 .agc2_pt2 = 59,
61
62 .agc2_slope1 = 111,
63 .agc2_slope2 = 28,
64 };
65
66 static struct dib3000mc_config bristol_dib3000mc_config[2] = {
67 { .agc = &bristol_dib3000p_mt2060_agc_config,
68 .max_time = 0x196,
69 .ln_adc_level = 0x1cc7,
70 .output_mpeg2_in_188_bytes = 1,
71 },
72 { .agc = &bristol_dib3000p_mt2060_agc_config,
73 .max_time = 0x196,
74 .ln_adc_level = 0x1cc7,
75 .output_mpeg2_in_188_bytes = 1,
76 }
77 };
78
79 static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
80 {
81 struct dib0700_state *st = adap->dev->priv;
82 if (adap->id == 0) {
83 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
84 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
85 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
86 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
87
88 if (force_lna_activation)
89 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
90 else
91 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
92
93 if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
94 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
95 return -ENODEV;
96 }
97 }
98 st->mt2060_if1[adap->id] = 1220;
99 return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
100 (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
101 }
102
103 static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
104 {
105 struct i2c_msg msg[2] = {
106 { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
107 { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
108 };
109 if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
110 return 0;
111 }
112
113 static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
114 {
115 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
116 struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
117 s8 a;
118 int if1=1220;
119 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
120 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
121 if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
122 }
123 return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
124 if1) == NULL ? -ENODEV : 0;
125 }
126
127 /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
128
129 /* MT226x */
130 static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
131 {
132 BAND_UHF, // band_caps
133
134 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
135 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
136 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
137
138 1130, // inv_gain
139 21, // time_stabiliz
140
141 0, // alpha_level
142 118, // thlock
143
144 0, // wbd_inv
145 3530, // wbd_ref
146 1, // wbd_sel
147 0, // wbd_alpha
148
149 65535, // agc1_max
150 33770, // agc1_min
151 65535, // agc2_max
152 23592, // agc2_min
153
154 0, // agc1_pt1
155 62, // agc1_pt2
156 255, // agc1_pt3
157 64, // agc1_slope1
158 64, // agc1_slope2
159 132, // agc2_pt1
160 192, // agc2_pt2
161 80, // agc2_slope1
162 80, // agc2_slope2
163
164 17, // alpha_mant
165 27, // alpha_exp
166 23, // beta_mant
167 51, // beta_exp
168
169 1, // perform_agc_softsplit
170 }, {
171 BAND_VHF | BAND_LBAND, // band_caps
172
173 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
174 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
175 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
176
177 2372, // inv_gain
178 21, // time_stabiliz
179
180 0, // alpha_level
181 118, // thlock
182
183 0, // wbd_inv
184 3530, // wbd_ref
185 1, // wbd_sel
186 0, // wbd_alpha
187
188 65535, // agc1_max
189 0, // agc1_min
190 65535, // agc2_max
191 23592, // agc2_min
192
193 0, // agc1_pt1
194 128, // agc1_pt2
195 128, // agc1_pt3
196 128, // agc1_slope1
197 0, // agc1_slope2
198 128, // agc2_pt1
199 253, // agc2_pt2
200 81, // agc2_slope1
201 0, // agc2_slope2
202
203 17, // alpha_mant
204 27, // alpha_exp
205 23, // beta_mant
206 51, // beta_exp
207
208 1, // perform_agc_softsplit
209 }
210 };
211
212 static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
213 60000, 30000, // internal, sampling
214 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
215 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
216 (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
217 0, // ifreq
218 20452225, // timf
219 };
220
221 static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
222 { .output_mpeg2_in_188_bytes = 1,
223 .hostbus_diversity = 1,
224 .tuner_is_baseband = 1,
225
226 .agc_config_count = 2,
227 .agc = stk7700d_7000p_mt2266_agc_config,
228 .bw = &stk7700d_mt2266_pll_config,
229
230 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
231 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
232 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
233 },
234 { .output_mpeg2_in_188_bytes = 1,
235 .hostbus_diversity = 1,
236 .tuner_is_baseband = 1,
237
238 .agc_config_count = 2,
239 .agc = stk7700d_7000p_mt2266_agc_config,
240 .bw = &stk7700d_mt2266_pll_config,
241
242 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
243 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
244 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
245 }
246 };
247
248 static struct mt2266_config stk7700d_mt2266_config[2] = {
249 { .i2c_address = 0x60
250 },
251 { .i2c_address = 0x60
252 }
253 };
254
255 static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
256 {
257 if (adap->id == 0) {
258 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
259 msleep(10);
260 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
261 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
262 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
263 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
264 msleep(10);
265 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
266 msleep(10);
267 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
268 stk7700d_dib7000p_mt2266_config)
269 != 0) {
270 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
271 return -ENODEV;
272 }
273 }
274
275 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
276 &stk7700d_dib7000p_mt2266_config[adap->id]);
277
278 return adap->fe == NULL ? -ENODEV : 0;
279 }
280
281 static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
282 {
283 if (adap->id == 0) {
284 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
285 msleep(10);
286 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
287 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
288 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
289 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
290 msleep(10);
291 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
292 msleep(10);
293 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
294 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
295 stk7700d_dib7000p_mt2266_config)
296 != 0) {
297 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
298 return -ENODEV;
299 }
300 }
301
302 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
303 &stk7700d_dib7000p_mt2266_config[adap->id]);
304
305 return adap->fe == NULL ? -ENODEV : 0;
306 }
307
308 static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
309 {
310 struct i2c_adapter *tun_i2c;
311 tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
312 return dvb_attach(mt2266_attach, adap->fe, tun_i2c,
313 &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;;
314 }
315
316 /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
317 static struct dibx000_agc_config xc3028_agc_config = {
318 BAND_VHF | BAND_UHF, /* band_caps */
319
320 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
321 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
322 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
323 (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
324 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
325
326 712, /* inv_gain */
327 21, /* time_stabiliz */
328
329 0, /* alpha_level */
330 118, /* thlock */
331
332 0, /* wbd_inv */
333 2867, /* wbd_ref */
334 0, /* wbd_sel */
335 2, /* wbd_alpha */
336
337 0, /* agc1_max */
338 0, /* agc1_min */
339 39718, /* agc2_max */
340 9930, /* agc2_min */
341 0, /* agc1_pt1 */
342 0, /* agc1_pt2 */
343 0, /* agc1_pt3 */
344 0, /* agc1_slope1 */
345 0, /* agc1_slope2 */
346 0, /* agc2_pt1 */
347 128, /* agc2_pt2 */
348 29, /* agc2_slope1 */
349 29, /* agc2_slope2 */
350
351 17, /* alpha_mant */
352 27, /* alpha_exp */
353 23, /* beta_mant */
354 51, /* beta_exp */
355
356 1, /* perform_agc_softsplit */
357 };
358
359 /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
360 static struct dibx000_bandwidth_config xc3028_bw_config = {
361 60000, 30000, /* internal, sampling */
362 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
363 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
364 modulo */
365 (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
366 (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
367 20452225, /* timf */
368 30000000, /* xtal_hz */
369 };
370
371 static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
372 .output_mpeg2_in_188_bytes = 1,
373 .tuner_is_baseband = 1,
374
375 .agc_config_count = 1,
376 .agc = &xc3028_agc_config,
377 .bw = &xc3028_bw_config,
378
379 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
380 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
381 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
382 };
383
384 static int stk7700ph_xc3028_callback(void *ptr, int component,
385 int command, int arg)
386 {
387 struct dvb_usb_adapter *adap = ptr;
388
389 switch (command) {
390 case XC2028_TUNER_RESET:
391 /* Send the tuner in then out of reset */
392 dib7000p_set_gpio(adap->fe, 8, 0, 0); msleep(10);
393 dib7000p_set_gpio(adap->fe, 8, 0, 1);
394 break;
395 case XC2028_RESET_CLK:
396 break;
397 default:
398 err("%s: unknown command %d, arg %d\n", __func__,
399 command, arg);
400 return -EINVAL;
401 }
402 return 0;
403 }
404
405 static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
406 .fname = XC2028_DEFAULT_FIRMWARE,
407 .max_len = 64,
408 .demod = XC3028_FE_DIBCOM52,
409 };
410
411 static struct xc2028_config stk7700ph_xc3028_config = {
412 .i2c_addr = 0x61,
413 .ctrl = &stk7700ph_xc3028_ctrl,
414 };
415
416 static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
417 {
418 struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
419
420 if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
421 desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
422 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
423 else
424 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
425 msleep(20);
426 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
427 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
428 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
429 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
430 msleep(10);
431 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
432 msleep(20);
433 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
434 msleep(10);
435
436 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
437 &stk7700ph_dib7700_xc3028_config) != 0) {
438 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
439 __func__);
440 return -ENODEV;
441 }
442
443 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
444 &stk7700ph_dib7700_xc3028_config);
445
446 return adap->fe == NULL ? -ENODEV : 0;
447 }
448
449 static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
450 {
451 struct i2c_adapter *tun_i2c;
452
453 tun_i2c = dib7000p_get_i2c_master(adap->fe,
454 DIBX000_I2C_INTERFACE_TUNER, 1);
455
456 stk7700ph_xc3028_config.i2c_adap = tun_i2c;
457
458 /* FIXME: generalize & move to common area */
459 adap->fe->callback = stk7700ph_xc3028_callback;
460
461 return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config)
462 == NULL ? -ENODEV : 0;
463 }
464
465 #define DEFAULT_RC_INTERVAL 50
466
467 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
468
469 /* Number of keypresses to ignore before start repeating */
470 #define RC_REPEAT_DELAY 6
471 #define RC_REPEAT_DELAY_V1_20 10
472
473
474
475 /* Used by firmware versions < 1.20 (deprecated) */
476 static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
477 int *state)
478 {
479 u8 key[4];
480 int i;
481 struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
482 struct dib0700_state *st = d->priv;
483 *event = 0;
484 *state = REMOTE_NO_KEY_PRESSED;
485 i=dib0700_ctrl_rd(d,rc_request,2,key,4);
486 if (i<=0) {
487 err("RC Query Failed");
488 return -1;
489 }
490
491 /* losing half of KEY_0 events from Philipps rc5 remotes.. */
492 if (key[0]==0 && key[1]==0 && key[2]==0 && key[3]==0) return 0;
493
494 /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */
495
496 dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
497
498 switch (dvb_usb_dib0700_ir_proto) {
499 case 0: {
500 /* NEC protocol sends repeat code as 0 0 0 FF */
501 if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
502 (key[3] == 0xFF)) {
503 st->rc_counter++;
504 if (st->rc_counter > RC_REPEAT_DELAY) {
505 *event = d->last_event;
506 *state = REMOTE_KEY_PRESSED;
507 st->rc_counter = RC_REPEAT_DELAY;
508 }
509 return 0;
510 }
511 for (i=0;i<d->props.rc_key_map_size; i++) {
512 if (keymap[i].custom == key[3-2] && keymap[i].data == key[3-3]) {
513 st->rc_counter = 0;
514 *event = keymap[i].event;
515 *state = REMOTE_KEY_PRESSED;
516 d->last_event = keymap[i].event;
517 return 0;
518 }
519 }
520 break;
521 }
522 default: {
523 /* RC-5 protocol changes toggle bit on new keypress */
524 for (i = 0; i < d->props.rc_key_map_size; i++) {
525 if (keymap[i].custom == key[3-2] && keymap[i].data == key[3-3]) {
526 if (d->last_event == keymap[i].event &&
527 key[3-1] == st->rc_toggle) {
528 st->rc_counter++;
529 /* prevents unwanted double hits */
530 if (st->rc_counter > RC_REPEAT_DELAY) {
531 *event = d->last_event;
532 *state = REMOTE_KEY_PRESSED;
533 st->rc_counter = RC_REPEAT_DELAY;
534 }
535
536 return 0;
537 }
538 st->rc_counter = 0;
539 *event = keymap[i].event;
540 *state = REMOTE_KEY_PRESSED;
541 st->rc_toggle = key[3-1];
542 d->last_event = keymap[i].event;
543 return 0;
544 }
545 }
546 break;
547 }
548 }
549 err("Unknown remote controller key: %2X %2X %2X %2X", (int) key[3-2], (int) key[3-3], (int) key[3-1], (int) key[3]);
550 d->last_event = 0;
551 return 0;
552 }
553
554 /* This is the structure of the RC response packet starting in firmware 1.20 */
555 struct dib0700_rc_response {
556 u8 report_id;
557 u8 data_state;
558 u8 system_msb;
559 u8 system_lsb;
560 u8 data;
561 u8 not_data;
562 };
563
564 /* This supports the new IR response format for firmware v1.20 */
565 static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
566 int *state)
567 {
568 struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
569 struct dib0700_state *st = d->priv;
570 struct dib0700_rc_response poll_reply;
571 u8 buf[6];
572 int i;
573 int status;
574 int actlen;
575 int found = 0;
576
577 /* Set initial results in case we exit the function early */
578 *event = 0;
579 *state = REMOTE_NO_KEY_PRESSED;
580
581 /* Firmware v1.20 provides RC data via bulk endpoint 1 */
582 status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
583 sizeof(buf), &actlen, 50);
584 if (status < 0) {
585 /* No data available (meaning no key press) */
586 return 0;
587 }
588
589 if (actlen != sizeof(buf)) {
590 /* We didn't get back the 6 byte message we expected */
591 err("Unexpected RC response size [%d]", actlen);
592 return -1;
593 }
594
595 poll_reply.report_id = buf[0];
596 poll_reply.data_state = buf[1];
597 poll_reply.system_msb = buf[2];
598 poll_reply.system_lsb = buf[3];
599 poll_reply.data = buf[4];
600 poll_reply.not_data = buf[5];
601
602 /*
603 info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
604 poll_reply.report_id, poll_reply.data_state,
605 poll_reply.system_msb, poll_reply.system_lsb,
606 poll_reply.data, poll_reply.not_data);
607 */
608
609 if ((poll_reply.data + poll_reply.not_data) != 0xff) {
610 /* Key failed integrity check */
611 err("key failed integrity check: %02x %02x %02x %02x",
612 poll_reply.system_msb, poll_reply.system_lsb,
613 poll_reply.data, poll_reply.not_data);
614 return -1;
615 }
616
617 /* Find the key in the map */
618 for (i = 0; i < d->props.rc_key_map_size; i++) {
619 if (keymap[i].custom == poll_reply.system_lsb &&
620 keymap[i].data == poll_reply.data) {
621 *event = keymap[i].event;
622 found = 1;
623 break;
624 }
625 }
626
627 if (found == 0) {
628 err("Unknown remote controller key: %02x %02x %02x %02x",
629 poll_reply.system_msb, poll_reply.system_lsb,
630 poll_reply.data, poll_reply.not_data);
631 d->last_event = 0;
632 return 0;
633 }
634
635 if (poll_reply.data_state == 1) {
636 /* New key hit */
637 st->rc_counter = 0;
638 *event = keymap[i].event;
639 *state = REMOTE_KEY_PRESSED;
640 d->last_event = keymap[i].event;
641 } else if (poll_reply.data_state == 2) {
642 /* Key repeated */
643 st->rc_counter++;
644
645 /* prevents unwanted double hits */
646 if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
647 *event = d->last_event;
648 *state = REMOTE_KEY_PRESSED;
649 st->rc_counter = RC_REPEAT_DELAY_V1_20;
650 }
651 } else {
652 err("Unknown data state [%d]", poll_reply.data_state);
653 }
654
655 return 0;
656 }
657
658 static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
659 {
660 struct dib0700_state *st = d->priv;
661
662 /* Because some people may have improperly named firmware files,
663 let's figure out whether to use the new firmware call or the legacy
664 call based on the firmware version embedded in the file */
665 if (st->rc_func_version == 0) {
666 u32 hwver, romver, ramver, fwtype;
667 int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
668 &fwtype);
669 if (ret < 0) {
670 err("Could not determine version info");
671 return -1;
672 }
673 if (ramver < 0x10200)
674 st->rc_func_version = 1;
675 else
676 st->rc_func_version = 2;
677 }
678
679 if (st->rc_func_version == 2)
680 return dib0700_rc_query_v1_20(d, event, state);
681 else
682 return dib0700_rc_query_legacy(d, event, state);
683 }
684
685 static struct dvb_usb_rc_key dib0700_rc_keys[] = {
686 /* Key codes for the tiny Pinnacle remote*/
687 { 0x07, 0x00, KEY_MUTE },
688 { 0x07, 0x01, KEY_MENU }, // Pinnacle logo
689 { 0x07, 0x39, KEY_POWER },
690 { 0x07, 0x03, KEY_VOLUMEUP },
691 { 0x07, 0x09, KEY_VOLUMEDOWN },
692 { 0x07, 0x06, KEY_CHANNELUP },
693 { 0x07, 0x0c, KEY_CHANNELDOWN },
694 { 0x07, 0x0f, KEY_1 },
695 { 0x07, 0x15, KEY_2 },
696 { 0x07, 0x10, KEY_3 },
697 { 0x07, 0x18, KEY_4 },
698 { 0x07, 0x1b, KEY_5 },
699 { 0x07, 0x1e, KEY_6 },
700 { 0x07, 0x11, KEY_7 },
701 { 0x07, 0x21, KEY_8 },
702 { 0x07, 0x12, KEY_9 },
703 { 0x07, 0x27, KEY_0 },
704 { 0x07, 0x24, KEY_SCREEN }, // 'Square' key
705 { 0x07, 0x2a, KEY_TEXT }, // 'T' key
706 { 0x07, 0x2d, KEY_REWIND },
707 { 0x07, 0x30, KEY_PLAY },
708 { 0x07, 0x33, KEY_FASTFORWARD },
709 { 0x07, 0x36, KEY_RECORD },
710 { 0x07, 0x3c, KEY_STOP },
711 { 0x07, 0x3f, KEY_CANCEL }, // '?' key
712 /* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
713 { 0xeb, 0x01, KEY_POWER },
714 { 0xeb, 0x02, KEY_1 },
715 { 0xeb, 0x03, KEY_2 },
716 { 0xeb, 0x04, KEY_3 },
717 { 0xeb, 0x05, KEY_4 },
718 { 0xeb, 0x06, KEY_5 },
719 { 0xeb, 0x07, KEY_6 },
720 { 0xeb, 0x08, KEY_7 },
721 { 0xeb, 0x09, KEY_8 },
722 { 0xeb, 0x0a, KEY_9 },
723 { 0xeb, 0x0b, KEY_VIDEO },
724 { 0xeb, 0x0c, KEY_0 },
725 { 0xeb, 0x0d, KEY_REFRESH },
726 { 0xeb, 0x0f, KEY_EPG },
727 { 0xeb, 0x10, KEY_UP },
728 { 0xeb, 0x11, KEY_LEFT },
729 { 0xeb, 0x12, KEY_OK },
730 { 0xeb, 0x13, KEY_RIGHT },
731 { 0xeb, 0x14, KEY_DOWN },
732 { 0xeb, 0x16, KEY_INFO },
733 { 0xeb, 0x17, KEY_RED },
734 { 0xeb, 0x18, KEY_GREEN },
735 { 0xeb, 0x19, KEY_YELLOW },
736 { 0xeb, 0x1a, KEY_BLUE },
737 { 0xeb, 0x1b, KEY_CHANNELUP },
738 { 0xeb, 0x1c, KEY_VOLUMEUP },
739 { 0xeb, 0x1d, KEY_MUTE },
740 { 0xeb, 0x1e, KEY_VOLUMEDOWN },
741 { 0xeb, 0x1f, KEY_CHANNELDOWN },
742 { 0xeb, 0x40, KEY_PAUSE },
743 { 0xeb, 0x41, KEY_HOME },
744 { 0xeb, 0x42, KEY_MENU }, /* DVD Menu */
745 { 0xeb, 0x43, KEY_SUBTITLE },
746 { 0xeb, 0x44, KEY_TEXT }, /* Teletext */
747 { 0xeb, 0x45, KEY_DELETE },
748 { 0xeb, 0x46, KEY_TV },
749 { 0xeb, 0x47, KEY_DVD },
750 { 0xeb, 0x48, KEY_STOP },
751 { 0xeb, 0x49, KEY_VIDEO },
752 { 0xeb, 0x4a, KEY_AUDIO }, /* Music */
753 { 0xeb, 0x4b, KEY_SCREEN }, /* Pic */
754 { 0xeb, 0x4c, KEY_PLAY },
755 { 0xeb, 0x4d, KEY_BACK },
756 { 0xeb, 0x4e, KEY_REWIND },
757 { 0xeb, 0x4f, KEY_FASTFORWARD },
758 { 0xeb, 0x54, KEY_PREVIOUS },
759 { 0xeb, 0x58, KEY_RECORD },
760 { 0xeb, 0x5c, KEY_NEXT },
761
762 /* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
763 { 0x1e, 0x00, KEY_0 },
764 { 0x1e, 0x01, KEY_1 },
765 { 0x1e, 0x02, KEY_2 },
766 { 0x1e, 0x03, KEY_3 },
767 { 0x1e, 0x04, KEY_4 },
768 { 0x1e, 0x05, KEY_5 },
769 { 0x1e, 0x06, KEY_6 },
770 { 0x1e, 0x07, KEY_7 },
771 { 0x1e, 0x08, KEY_8 },
772 { 0x1e, 0x09, KEY_9 },
773 { 0x1e, 0x0a, KEY_KPASTERISK },
774 { 0x1e, 0x0b, KEY_RED },
775 { 0x1e, 0x0c, KEY_RADIO },
776 { 0x1e, 0x0d, KEY_MENU },
777 { 0x1e, 0x0e, KEY_GRAVE }, /* # */
778 { 0x1e, 0x0f, KEY_MUTE },
779 { 0x1e, 0x10, KEY_VOLUMEUP },
780 { 0x1e, 0x11, KEY_VOLUMEDOWN },
781 { 0x1e, 0x12, KEY_CHANNEL },
782 { 0x1e, 0x14, KEY_UP },
783 { 0x1e, 0x15, KEY_DOWN },
784 { 0x1e, 0x16, KEY_LEFT },
785 { 0x1e, 0x17, KEY_RIGHT },
786 { 0x1e, 0x18, KEY_VIDEO },
787 { 0x1e, 0x19, KEY_AUDIO },
788 { 0x1e, 0x1a, KEY_MEDIA },
789 { 0x1e, 0x1b, KEY_EPG },
790 { 0x1e, 0x1c, KEY_TV },
791 { 0x1e, 0x1e, KEY_NEXT },
792 { 0x1e, 0x1f, KEY_BACK },
793 { 0x1e, 0x20, KEY_CHANNELUP },
794 { 0x1e, 0x21, KEY_CHANNELDOWN },
795 { 0x1e, 0x24, KEY_LAST }, /* Skip backwards */
796 { 0x1e, 0x25, KEY_OK },
797 { 0x1e, 0x29, KEY_BLUE},
798 { 0x1e, 0x2e, KEY_GREEN },
799 { 0x1e, 0x30, KEY_PAUSE },
800 { 0x1e, 0x32, KEY_REWIND },
801 { 0x1e, 0x34, KEY_FASTFORWARD },
802 { 0x1e, 0x35, KEY_PLAY },
803 { 0x1e, 0x36, KEY_STOP },
804 { 0x1e, 0x37, KEY_RECORD },
805 { 0x1e, 0x38, KEY_YELLOW },
806 { 0x1e, 0x3b, KEY_GOTO },
807 { 0x1e, 0x3d, KEY_POWER },
808
809 /* Key codes for the Leadtek Winfast DTV Dongle */
810 { 0x00, 0x42, KEY_POWER },
811 { 0x07, 0x7c, KEY_TUNER },
812 { 0x0f, 0x4e, KEY_PRINT }, /* PREVIEW */
813 { 0x08, 0x40, KEY_SCREEN }, /* full screen toggle*/
814 { 0x0f, 0x71, KEY_DOT }, /* frequency */
815 { 0x07, 0x43, KEY_0 },
816 { 0x0c, 0x41, KEY_1 },
817 { 0x04, 0x43, KEY_2 },
818 { 0x0b, 0x7f, KEY_3 },
819 { 0x0e, 0x41, KEY_4 },
820 { 0x06, 0x43, KEY_5 },
821 { 0x09, 0x7f, KEY_6 },
822 { 0x0d, 0x7e, KEY_7 },
823 { 0x05, 0x7c, KEY_8 },
824 { 0x0a, 0x40, KEY_9 },
825 { 0x0e, 0x4e, KEY_CLEAR },
826 { 0x04, 0x7c, KEY_CHANNEL }, /* show channel number */
827 { 0x0f, 0x41, KEY_LAST }, /* recall */
828 { 0x03, 0x42, KEY_MUTE },
829 { 0x06, 0x4c, KEY_RESERVED }, /* PIP button*/
830 { 0x01, 0x72, KEY_SHUFFLE }, /* SNAPSHOT */
831 { 0x0c, 0x4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
832 { 0x0b, 0x70, KEY_RECORD },
833 { 0x03, 0x7d, KEY_VOLUMEUP },
834 { 0x01, 0x7d, KEY_VOLUMEDOWN },
835 { 0x02, 0x42, KEY_CHANNELUP },
836 { 0x00, 0x7d, KEY_CHANNELDOWN },
837
838 /* Key codes for Nova-TD "credit card" remote control. */
839 { 0x1d, 0x00, KEY_0 },
840 { 0x1d, 0x01, KEY_1 },
841 { 0x1d, 0x02, KEY_2 },
842 { 0x1d, 0x03, KEY_3 },
843 { 0x1d, 0x04, KEY_4 },
844 { 0x1d, 0x05, KEY_5 },
845 { 0x1d, 0x06, KEY_6 },
846 { 0x1d, 0x07, KEY_7 },
847 { 0x1d, 0x08, KEY_8 },
848 { 0x1d, 0x09, KEY_9 },
849 { 0x1d, 0x0a, KEY_TEXT },
850 { 0x1d, 0x0d, KEY_MENU },
851 { 0x1d, 0x0f, KEY_MUTE },
852 { 0x1d, 0x10, KEY_VOLUMEUP },
853 { 0x1d, 0x11, KEY_VOLUMEDOWN },
854 { 0x1d, 0x12, KEY_CHANNEL },
855 { 0x1d, 0x14, KEY_UP },
856 { 0x1d, 0x15, KEY_DOWN },
857 { 0x1d, 0x16, KEY_LEFT },
858 { 0x1d, 0x17, KEY_RIGHT },
859 { 0x1d, 0x1c, KEY_TV },
860 { 0x1d, 0x1e, KEY_NEXT },
861 { 0x1d, 0x1f, KEY_BACK },
862 { 0x1d, 0x20, KEY_CHANNELUP },
863 { 0x1d, 0x21, KEY_CHANNELDOWN },
864 { 0x1d, 0x24, KEY_LAST },
865 { 0x1d, 0x25, KEY_OK },
866 { 0x1d, 0x30, KEY_PAUSE },
867 { 0x1d, 0x32, KEY_REWIND },
868 { 0x1d, 0x34, KEY_FASTFORWARD },
869 { 0x1d, 0x35, KEY_PLAY },
870 { 0x1d, 0x36, KEY_STOP },
871 { 0x1d, 0x37, KEY_RECORD },
872 { 0x1d, 0x3b, KEY_GOTO },
873 { 0x1d, 0x3d, KEY_POWER },
874 };
875
876 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
877 static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
878 BAND_UHF | BAND_VHF, // band_caps
879
880 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
881 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
882 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
883
884 712, // inv_gain
885 41, // time_stabiliz
886
887 0, // alpha_level
888 118, // thlock
889
890 0, // wbd_inv
891 4095, // wbd_ref
892 0, // wbd_sel
893 0, // wbd_alpha
894
895 42598, // agc1_max
896 17694, // agc1_min
897 45875, // agc2_max
898 2621, // agc2_min
899 0, // agc1_pt1
900 76, // agc1_pt2
901 139, // agc1_pt3
902 52, // agc1_slope1
903 59, // agc1_slope2
904 107, // agc2_pt1
905 172, // agc2_pt2
906 57, // agc2_slope1
907 70, // agc2_slope2
908
909 21, // alpha_mant
910 25, // alpha_exp
911 28, // beta_mant
912 48, // beta_exp
913
914 1, // perform_agc_softsplit
915 { 0, // split_min
916 107, // split_max
917 51800, // global_split_min
918 24700 // global_split_max
919 },
920 };
921
922 static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
923 BAND_UHF | BAND_VHF,
924
925 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
926 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
927 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
928
929 712, // inv_gain
930 41, // time_stabiliz
931
932 0, // alpha_level
933 118, // thlock
934
935 0, // wbd_inv
936 4095, // wbd_ref
937 0, // wbd_sel
938 0, // wbd_alpha
939
940 42598, // agc1_max
941 16384, // agc1_min
942 42598, // agc2_max
943 0, // agc2_min
944
945 0, // agc1_pt1
946 137, // agc1_pt2
947 255, // agc1_pt3
948
949 0, // agc1_slope1
950 255, // agc1_slope2
951
952 0, // agc2_pt1
953 0, // agc2_pt2
954
955 0, // agc2_slope1
956 41, // agc2_slope2
957
958 15, // alpha_mant
959 25, // alpha_exp
960
961 28, // beta_mant
962 48, // beta_exp
963
964 0, // perform_agc_softsplit
965 };
966
967 static struct dibx000_bandwidth_config stk7700p_pll_config = {
968 60000, 30000, // internal, sampling
969 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
970 0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
971 (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
972 60258167, // ifreq
973 20452225, // timf
974 30000000, // xtal
975 };
976
977 static struct dib7000m_config stk7700p_dib7000m_config = {
978 .dvbt_mode = 1,
979 .output_mpeg2_in_188_bytes = 1,
980 .quartz_direct = 1,
981
982 .agc_config_count = 1,
983 .agc = &stk7700p_7000m_mt2060_agc_config,
984 .bw = &stk7700p_pll_config,
985
986 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
987 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
988 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
989 };
990
991 static struct dib7000p_config stk7700p_dib7000p_config = {
992 .output_mpeg2_in_188_bytes = 1,
993
994 .agc_config_count = 1,
995 .agc = &stk7700p_7000p_mt2060_agc_config,
996 .bw = &stk7700p_pll_config,
997
998 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
999 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
1000 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
1001 };
1002
1003 static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
1004 {
1005 struct dib0700_state *st = adap->dev->priv;
1006 /* unless there is no real power management in DVB - we leave the device on GPIO6 */
1007
1008 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1009 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
1010
1011 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
1012 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1013
1014 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
1015 dib0700_ctrl_clock(adap->dev, 72, 1);
1016 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
1017
1018 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1019
1020 st->mt2060_if1[0] = 1220;
1021
1022 if (dib7000pc_detection(&adap->dev->i2c_adap)) {
1023 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
1024 st->is_dib7000pc = 1;
1025 } else
1026 adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
1027
1028 return adap->fe == NULL ? -ENODEV : 0;
1029 }
1030
1031 static struct mt2060_config stk7700p_mt2060_config = {
1032 0x60
1033 };
1034
1035 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
1036 {
1037 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
1038 struct dib0700_state *st = adap->dev->priv;
1039 struct i2c_adapter *tun_i2c;
1040 s8 a;
1041 int if1=1220;
1042 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
1043 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
1044 if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
1045 }
1046 if (st->is_dib7000pc)
1047 tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1048 else
1049 tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1050
1051 return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
1052 if1) == NULL ? -ENODEV : 0;
1053 }
1054
1055 /* DIB7070 generic */
1056 static struct dibx000_agc_config dib7070_agc_config = {
1057 BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
1058 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
1059 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1060 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
1061
1062 600, // inv_gain
1063 10, // time_stabiliz
1064
1065 0, // alpha_level
1066 118, // thlock
1067
1068 0, // wbd_inv
1069 3530, // wbd_ref
1070 1, // wbd_sel
1071 5, // wbd_alpha
1072
1073 65535, // agc1_max
1074 0, // agc1_min
1075
1076 65535, // agc2_max
1077 0, // agc2_min
1078
1079 0, // agc1_pt1
1080 40, // agc1_pt2
1081 183, // agc1_pt3
1082 206, // agc1_slope1
1083 255, // agc1_slope2
1084 72, // agc2_pt1
1085 152, // agc2_pt2
1086 88, // agc2_slope1
1087 90, // agc2_slope2
1088
1089 17, // alpha_mant
1090 27, // alpha_exp
1091 23, // beta_mant
1092 51, // beta_exp
1093
1094 0, // perform_agc_softsplit
1095 };
1096
1097 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
1098 {
1099 return dib7000p_set_gpio(fe, 8, 0, !onoff);
1100 }
1101
1102 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
1103 {
1104 return dib7000p_set_gpio(fe, 9, 0, onoff);
1105 }
1106
1107 static struct dib0070_config dib7070p_dib0070_config[2] = {
1108 {
1109 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1110 .reset = dib7070_tuner_reset,
1111 .sleep = dib7070_tuner_sleep,
1112 .clock_khz = 12000,
1113 .clock_pad_drive = 4
1114 }, {
1115 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1116 .reset = dib7070_tuner_reset,
1117 .sleep = dib7070_tuner_sleep,
1118 .clock_khz = 12000,
1119
1120 }
1121 };
1122
1123 static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
1124 {
1125 struct dvb_usb_adapter *adap = fe->dvb->priv;
1126 struct dib0700_adapter_state *state = adap->priv;
1127
1128 u16 offset;
1129 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
1130 switch (band) {
1131 case BAND_VHF: offset = 950; break;
1132 case BAND_UHF:
1133 default: offset = 550; break;
1134 }
1135 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
1136 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
1137 return state->set_param_save(fe, fep);
1138 }
1139
1140 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
1141 {
1142 struct dib0700_adapter_state *st = adap->priv;
1143 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1144
1145 if (adap->id == 0) {
1146 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
1147 return -ENODEV;
1148 } else {
1149 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
1150 return -ENODEV;
1151 }
1152
1153 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
1154 adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
1155 return 0;
1156 }
1157
1158 static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
1159 60000, 15000, // internal, sampling
1160 1, 20, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
1161 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
1162 (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
1163 (0 << 25) | 0, // ifreq = 0.000000 MHz
1164 20452225, // timf
1165 12000000, // xtal_hz
1166 };
1167
1168 static struct dib7000p_config dib7070p_dib7000p_config = {
1169 .output_mpeg2_in_188_bytes = 1,
1170
1171 .agc_config_count = 1,
1172 .agc = &dib7070_agc_config,
1173 .bw = &dib7070_bw_config_12_mhz,
1174 .tuner_is_baseband = 1,
1175 .spur_protect = 1,
1176
1177 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
1178 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
1179 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1180
1181 .hostbus_diversity = 1,
1182 };
1183
1184 /* STK7070P */
1185 static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
1186 {
1187 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
1188 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
1189 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
1190 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1191 else
1192 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1193 msleep(10);
1194 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1195 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1196 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1197 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1198
1199 dib0700_ctrl_clock(adap->dev, 72, 1);
1200
1201 msleep(10);
1202 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1203 msleep(10);
1204 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1205
1206 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1207 &dib7070p_dib7000p_config) != 0) {
1208 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
1209 __func__);
1210 return -ENODEV;
1211 }
1212
1213 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
1214 &dib7070p_dib7000p_config);
1215 return adap->fe == NULL ? -ENODEV : 0;
1216 }
1217
1218 /* STK7070PD */
1219 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
1220 {
1221 .output_mpeg2_in_188_bytes = 1,
1222
1223 .agc_config_count = 1,
1224 .agc = &dib7070_agc_config,
1225 .bw = &dib7070_bw_config_12_mhz,
1226 .tuner_is_baseband = 1,
1227 .spur_protect = 1,
1228
1229 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
1230 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
1231 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1232
1233 .hostbus_diversity = 1,
1234 }, {
1235 .output_mpeg2_in_188_bytes = 1,
1236
1237 .agc_config_count = 1,
1238 .agc = &dib7070_agc_config,
1239 .bw = &dib7070_bw_config_12_mhz,
1240 .tuner_is_baseband = 1,
1241 .spur_protect = 1,
1242
1243 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
1244 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
1245 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1246
1247 .hostbus_diversity = 1,
1248 }
1249 };
1250
1251 static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
1252 {
1253 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1254 msleep(10);
1255 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1256 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1257 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1258 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1259
1260 dib0700_ctrl_clock(adap->dev, 72, 1);
1261
1262 msleep(10);
1263 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1264 msleep(10);
1265 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1266
1267 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
1268 stk7070pd_dib7000p_config) != 0) {
1269 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
1270 __func__);
1271 return -ENODEV;
1272 }
1273
1274 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
1275 return adap->fe == NULL ? -ENODEV : 0;
1276 }
1277
1278 static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
1279 {
1280 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
1281 return adap->fe == NULL ? -ENODEV : 0;
1282 }
1283
1284 /* S5H1411 */
1285 static struct s5h1411_config pinnacle_801e_config = {
1286 .output_mode = S5H1411_PARALLEL_OUTPUT,
1287 .gpio = S5H1411_GPIO_OFF,
1288 .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
1289 .qam_if = S5H1411_IF_44000,
1290 .vsb_if = S5H1411_IF_44000,
1291 .inversion = S5H1411_INVERSION_OFF,
1292 .status_mode = S5H1411_DEMODLOCKING
1293 };
1294
1295 /* Pinnacle PCTV HD Pro 801e GPIOs map:
1296 GPIO0 - currently unknown
1297 GPIO1 - xc5000 tuner reset
1298 GPIO2 - CX25843 sleep
1299 GPIO3 - currently unknown
1300 GPIO4 - currently unknown
1301 GPIO6 - currently unknown
1302 GPIO7 - currently unknown
1303 GPIO9 - currently unknown
1304 GPIO10 - CX25843 reset
1305 */
1306 static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
1307 {
1308 struct dib0700_state *st = adap->dev->priv;
1309
1310 /* Make use of the new i2c functions from FW 1.20 */
1311 st->fw_use_new_i2c_api = 1;
1312
1313 /* The s5h1411 requires the dib0700 to not be in master mode */
1314 st->disable_streaming_master_mode = 1;
1315
1316 /* All msleep values taken from Windows USB trace */
1317 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
1318 dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
1319 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1320 msleep(400);
1321 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1322 msleep(60);
1323 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1324 msleep(30);
1325 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1326 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1327 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1328 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1329 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
1330 msleep(30);
1331
1332 /* Put the CX25843 to sleep for now since we're in digital mode */
1333 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
1334
1335 /* GPIOs are initialized, do the attach */
1336 adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
1337 &adap->dev->i2c_adap);
1338 return adap->fe == NULL ? -ENODEV : 0;
1339 }
1340
1341 static int dib0700_xc5000_tuner_callback(void *priv, int component,
1342 int command, int arg)
1343 {
1344 struct dvb_usb_adapter *adap = priv;
1345
1346 if (command == XC5000_TUNER_RESET) {
1347 /* Reset the tuner */
1348 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
1349 msleep(10);
1350 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
1351 msleep(10);
1352 } else {
1353 err("xc5000: unknown tuner callback command: %d\n", command);
1354 return -EINVAL;
1355 }
1356
1357 return 0;
1358 }
1359
1360 static struct xc5000_config s5h1411_xc5000_tunerconfig = {
1361 .i2c_address = 0x64,
1362 .if_khz = 5380,
1363 };
1364
1365 static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
1366 {
1367 /* FIXME: generalize & move to common area */
1368 adap->fe->callback = dib0700_xc5000_tuner_callback;
1369
1370 return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap,
1371 &s5h1411_xc5000_tunerconfig)
1372 == NULL ? -ENODEV : 0;
1373 }
1374
1375 static struct lgdt3305_config hcw_lgdt3305_config = {
1376 .i2c_addr = 0x0e,
1377 .mpeg_mode = LGDT3305_MPEG_PARALLEL,
1378 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
1379 .tpvalid_polarity = LGDT3305_TP_VALID_LOW,
1380 .deny_i2c_rptr = 0,
1381 .spectral_inversion = 1,
1382 .qam_if_khz = 6000,
1383 .vsb_if_khz = 6000,
1384 .usref_8vsb = 0x0500,
1385 };
1386
1387 static struct mxl5007t_config hcw_mxl5007t_config = {
1388 .xtal_freq_hz = MxL_XTAL_25_MHZ,
1389 .if_freq_hz = MxL_IF_6_MHZ,
1390 .invert_if = 1,
1391 };
1392
1393 /* TIGER-ATSC map:
1394 GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
1395 GPIO1 - ANT_SEL (H: VPA, L: MCX)
1396 GPIO4 - SCL2
1397 GPIO6 - EN_TUNER
1398 GPIO7 - SDA2
1399 GPIO10 - DEM_RST
1400
1401 MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
1402 */
1403 static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
1404 {
1405 struct dib0700_state *st = adap->dev->priv;
1406
1407 /* Make use of the new i2c functions from FW 1.20 */
1408 st->fw_use_new_i2c_api = 1;
1409
1410 st->disable_streaming_master_mode = 1;
1411
1412 /* fe power enable */
1413 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1414 msleep(30);
1415 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1416 msleep(30);
1417
1418 /* demod reset */
1419 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1420 msleep(30);
1421 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1422 msleep(30);
1423 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1424 msleep(30);
1425
1426 adap->fe = dvb_attach(lgdt3305_attach,
1427 &hcw_lgdt3305_config,
1428 &adap->dev->i2c_adap);
1429
1430 return adap->fe == NULL ? -ENODEV : 0;
1431 }
1432
1433 static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
1434 {
1435 return dvb_attach(mxl5007t_attach, adap->fe,
1436 &adap->dev->i2c_adap, 0x60,
1437 &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
1438 }
1439
1440
1441 /* DVB-USB and USB stuff follows */
1442 struct usb_device_id dib0700_usb_id_table[] = {
1443 /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
1444 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
1445 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
1446 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
1447 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
1448 /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
1449 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
1450 { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
1451 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
1452 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
1453 /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
1454 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
1455 { USB_DEVICE(USB_VID_TERRATEC,
1456 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
1457 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
1458 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
1459 /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
1460 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
1461 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
1462 { USB_DEVICE(USB_VID_PINNACLE,
1463 USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
1464 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
1465 /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
1466 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
1467 { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
1468 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
1469 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
1470 /* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
1471 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
1472 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
1473 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
1474 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
1475 /* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
1476 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
1477 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
1478 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
1479 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
1480 /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
1481 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
1482 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
1483 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
1484 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
1485 /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
1486 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
1487 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
1488 { USB_DEVICE(USB_VID_TERRATEC,
1489 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
1490 { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
1491 /* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
1492 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
1493 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
1494 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
1495 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
1496 /* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
1497 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
1498 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
1499 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
1500 { 0 } /* Terminating entry */
1501 };
1502 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
1503
1504 #define DIB0700_DEFAULT_DEVICE_PROPERTIES \
1505 .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
1506 .usb_ctrl = DEVICE_SPECIFIC, \
1507 .firmware = "dvb-usb-dib0700-1.20.fw", \
1508 .download_firmware = dib0700_download_firmware, \
1509 .no_reconnect = 1, \
1510 .size_of_priv = sizeof(struct dib0700_state), \
1511 .i2c_algo = &dib0700_i2c_algo, \
1512 .identify_state = dib0700_identify_state
1513
1514 #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
1515 .streaming_ctrl = dib0700_streaming_ctrl, \
1516 .stream = { \
1517 .type = USB_BULK, \
1518 .count = 4, \
1519 .endpoint = ep, \
1520 .u = { \
1521 .bulk = { \
1522 .buffersize = 39480, \
1523 } \
1524 } \
1525 }
1526
1527 struct dvb_usb_device_properties dib0700_devices[] = {
1528 {
1529 DIB0700_DEFAULT_DEVICE_PROPERTIES,
1530
1531 .num_adapters = 1,
1532 .adapter = {
1533 {
1534 .frontend_attach = stk7700p_frontend_attach,
1535 .tuner_attach = stk7700p_tuner_attach,
1536
1537 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1538 },
1539 },
1540
1541 .num_device_descs = 8,
1542 .devices = {
1543 { "DiBcom STK7700P reference design",
1544 { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
1545 { NULL },
1546 },
1547 { "Hauppauge Nova-T Stick",
1548 { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
1549 { NULL },
1550 },
1551 { "AVerMedia AVerTV DVB-T Volar",
1552 { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
1553 { NULL },
1554 },
1555 { "Compro Videomate U500",
1556 { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
1557 { NULL },
1558 },
1559 { "Uniwill STK7700P based (Hama and others)",
1560 { &dib0700_usb_id_table[7], NULL },
1561 { NULL },
1562 },
1563 { "Leadtek Winfast DTV Dongle (STK7700P based)",
1564 { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
1565 { NULL },
1566 },
1567 { "AVerMedia AVerTV DVB-T Express",
1568 { &dib0700_usb_id_table[20] },
1569 { NULL },
1570 },
1571 { "Gigabyte U7000",
1572 { &dib0700_usb_id_table[21], NULL },
1573 { NULL },
1574 }
1575 },
1576
1577 .rc_interval = DEFAULT_RC_INTERVAL,
1578 .rc_key_map = dib0700_rc_keys,
1579 .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
1580 .rc_query = dib0700_rc_query
1581 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1582
1583 .num_adapters = 2,
1584 .adapter = {
1585 {
1586 .frontend_attach = bristol_frontend_attach,
1587 .tuner_attach = bristol_tuner_attach,
1588
1589 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1590 }, {
1591 .frontend_attach = bristol_frontend_attach,
1592 .tuner_attach = bristol_tuner_attach,
1593
1594 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
1595 }
1596 },
1597
1598 .num_device_descs = 1,
1599 .devices = {
1600 { "Hauppauge Nova-T 500 Dual DVB-T",
1601 { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
1602 { NULL },
1603 },
1604 },
1605
1606 .rc_interval = DEFAULT_RC_INTERVAL,
1607 .rc_key_map = dib0700_rc_keys,
1608 .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
1609 .rc_query = dib0700_rc_query
1610 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1611
1612 .num_adapters = 2,
1613 .adapter = {
1614 {
1615 .frontend_attach = stk7700d_frontend_attach,
1616 .tuner_attach = stk7700d_tuner_attach,
1617
1618 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1619 }, {
1620 .frontend_attach = stk7700d_frontend_attach,
1621 .tuner_attach = stk7700d_tuner_attach,
1622
1623 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
1624 }
1625 },
1626
1627 .num_device_descs = 4,
1628 .devices = {
1629 { "Pinnacle PCTV 2000e",
1630 { &dib0700_usb_id_table[11], NULL },
1631 { NULL },
1632 },
1633 { "Terratec Cinergy DT XS Diversity",
1634 { &dib0700_usb_id_table[12], NULL },
1635 { NULL },
1636 },
1637 { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
1638 { &dib0700_usb_id_table[13], NULL },
1639 { NULL },
1640 },
1641 { "DiBcom STK7700D reference design",
1642 { &dib0700_usb_id_table[14], NULL },
1643 { NULL },
1644 },
1645
1646 },
1647
1648 .rc_interval = DEFAULT_RC_INTERVAL,
1649 .rc_key_map = dib0700_rc_keys,
1650 .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
1651 .rc_query = dib0700_rc_query
1652
1653 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1654
1655 .num_adapters = 1,
1656 .adapter = {
1657 {
1658 .frontend_attach = stk7700P2_frontend_attach,
1659 .tuner_attach = stk7700d_tuner_attach,
1660
1661 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1662 },
1663 },
1664
1665 .num_device_descs = 3,
1666 .devices = {
1667 { "ASUS My Cinema U3000 Mini DVBT Tuner",
1668 { &dib0700_usb_id_table[23], NULL },
1669 { NULL },
1670 },
1671 { "Yuan EC372S",
1672 { &dib0700_usb_id_table[31], NULL },
1673 { NULL },
1674 },
1675 { "Terratec Cinergy T Express",
1676 { &dib0700_usb_id_table[42], NULL },
1677 { NULL },
1678 }
1679 },
1680
1681 .rc_interval = DEFAULT_RC_INTERVAL,
1682 .rc_key_map = dib0700_rc_keys,
1683 .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
1684 .rc_query = dib0700_rc_query
1685 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1686
1687 .num_adapters = 1,
1688 .adapter = {
1689 {
1690 .frontend_attach = stk7070p_frontend_attach,
1691 .tuner_attach = dib7070p_tuner_attach,
1692
1693 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1694
1695 .size_of_priv = sizeof(struct dib0700_adapter_state),
1696 },
1697 },
1698
1699 .num_device_descs = 12,
1700 .devices = {
1701 { "DiBcom STK7070P reference design",
1702 { &dib0700_usb_id_table[15], NULL },
1703 { NULL },
1704 },
1705 { "Pinnacle PCTV DVB-T Flash Stick",
1706 { &dib0700_usb_id_table[16], NULL },
1707 { NULL },
1708 },
1709 { "Artec T14BR DVB-T",
1710 { &dib0700_usb_id_table[22], NULL },
1711 { NULL },
1712 },
1713 { "ASUS My Cinema U3100 Mini DVBT Tuner",
1714 { &dib0700_usb_id_table[24], NULL },
1715 { NULL },
1716 },
1717 { "Hauppauge Nova-T Stick",
1718 { &dib0700_usb_id_table[25], NULL },
1719 { NULL },
1720 },
1721 { "Hauppauge Nova-T MyTV.t",
1722 { &dib0700_usb_id_table[26], NULL },
1723 { NULL },
1724 },
1725 { "Pinnacle PCTV 72e",
1726 { &dib0700_usb_id_table[29], NULL },
1727 { NULL },
1728 },
1729 { "Pinnacle PCTV 73e",
1730 { &dib0700_usb_id_table[30], NULL },
1731 { NULL },
1732 },
1733 { "Terratec Cinergy T USB XXS/ T3",
1734 { &dib0700_usb_id_table[33],
1735 &dib0700_usb_id_table[52], NULL },
1736 { NULL },
1737 },
1738 { "Elgato EyeTV DTT",
1739 { &dib0700_usb_id_table[49], NULL },
1740 { NULL },
1741 },
1742 { "Yuan PD378S",
1743 { &dib0700_usb_id_table[45], NULL },
1744 { NULL },
1745 },
1746 { "Elgato EyeTV Dtt Dlx PD378S",
1747 { &dib0700_usb_id_table[50], NULL },
1748 { NULL },
1749 },
1750 },
1751
1752 .rc_interval = DEFAULT_RC_INTERVAL,
1753 .rc_key_map = dib0700_rc_keys,
1754 .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
1755 .rc_query = dib0700_rc_query
1756
1757 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1758
1759 .num_adapters = 2,
1760 .adapter = {
1761 {
1762 .frontend_attach = stk7070pd_frontend_attach0,
1763 .tuner_attach = dib7070p_tuner_attach,
1764
1765 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1766
1767 .size_of_priv = sizeof(struct dib0700_adapter_state),
1768 }, {
1769 .frontend_attach = stk7070pd_frontend_attach1,
1770 .tuner_attach = dib7070p_tuner_attach,
1771
1772 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
1773
1774 .size_of_priv = sizeof(struct dib0700_adapter_state),
1775 }
1776 },
1777
1778 .num_device_descs = 6,
1779 .devices = {
1780 { "DiBcom STK7070PD reference design",
1781 { &dib0700_usb_id_table[17], NULL },
1782 { NULL },
1783 },
1784 { "Pinnacle PCTV Dual DVB-T Diversity Stick",
1785 { &dib0700_usb_id_table[18], NULL },
1786 { NULL },
1787 },
1788 { "Hauppauge Nova-TD Stick (52009)",
1789 { &dib0700_usb_id_table[35], NULL },
1790 { NULL },
1791 },
1792 { "Hauppauge Nova-TD-500 (84xxx)",
1793 { &dib0700_usb_id_table[36], NULL },
1794 { NULL },
1795 },
1796 { "Terratec Cinergy DT USB XS Diversity/ T5",
1797 { &dib0700_usb_id_table[43],
1798 &dib0700_usb_id_table[53], NULL},
1799 { NULL },
1800 },
1801 { "Sony PlayTV",
1802 { &dib0700_usb_id_table[44], NULL },
1803 { NULL },
1804 }
1805 },
1806 .rc_interval = DEFAULT_RC_INTERVAL,
1807 .rc_key_map = dib0700_rc_keys,
1808 .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
1809 .rc_query = dib0700_rc_query
1810 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1811
1812 .num_adapters = 1,
1813 .adapter = {
1814 {
1815 .frontend_attach = stk7700ph_frontend_attach,
1816 .tuner_attach = stk7700ph_tuner_attach,
1817
1818 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1819
1820 .size_of_priv = sizeof(struct
1821 dib0700_adapter_state),
1822 },
1823 },
1824
1825 .num_device_descs = 8,
1826 .devices = {
1827 { "Terratec Cinergy HT USB XE",
1828 { &dib0700_usb_id_table[27], NULL },
1829 { NULL },
1830 },
1831 { "Pinnacle Expresscard 320cx",
1832 { &dib0700_usb_id_table[28], NULL },
1833 { NULL },
1834 },
1835 { "Terratec Cinergy HT Express",
1836 { &dib0700_usb_id_table[32], NULL },
1837 { NULL },
1838 },
1839 { "Gigabyte U8000-RH",
1840 { &dib0700_usb_id_table[37], NULL },
1841 { NULL },
1842 },
1843 { "YUAN High-Tech STK7700PH",
1844 { &dib0700_usb_id_table[38], NULL },
1845 { NULL },
1846 },
1847 { "Asus My Cinema-U3000Hybrid",
1848 { &dib0700_usb_id_table[39], NULL },
1849 { NULL },
1850 },
1851 { "YUAN High-Tech MC770",
1852 { &dib0700_usb_id_table[48], NULL },
1853 { NULL },
1854 },
1855 { "Leadtek WinFast DTV Dongle H",
1856 { &dib0700_usb_id_table[51], NULL },
1857 { NULL },
1858 },
1859
1860 },
1861 .rc_interval = DEFAULT_RC_INTERVAL,
1862 .rc_key_map = dib0700_rc_keys,
1863 .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
1864 .rc_query = dib0700_rc_query
1865 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1866 .num_adapters = 1,
1867 .adapter = {
1868 {
1869 .frontend_attach = s5h1411_frontend_attach,
1870 .tuner_attach = xc5000_tuner_attach,
1871
1872 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1873
1874 .size_of_priv = sizeof(struct
1875 dib0700_adapter_state),
1876 },
1877 },
1878
1879 .num_device_descs = 2,
1880 .devices = {
1881 { "Pinnacle PCTV HD Pro USB Stick",
1882 { &dib0700_usb_id_table[40], NULL },
1883 { NULL },
1884 },
1885 { "Pinnacle PCTV HD USB Stick",
1886 { &dib0700_usb_id_table[41], NULL },
1887 { NULL },
1888 },
1889 },
1890 .rc_interval = DEFAULT_RC_INTERVAL,
1891 .rc_key_map = dib0700_rc_keys,
1892 .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
1893 .rc_query = dib0700_rc_query
1894 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1895 .num_adapters = 1,
1896 .adapter = {
1897 {
1898 .frontend_attach = lgdt3305_frontend_attach,
1899 .tuner_attach = mxl5007t_tuner_attach,
1900
1901 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1902
1903 .size_of_priv = sizeof(struct
1904 dib0700_adapter_state),
1905 },
1906 },
1907
1908 .num_device_descs = 2,
1909 .devices = {
1910 { "Hauppauge ATSC MiniCard (B200)",
1911 { &dib0700_usb_id_table[46], NULL },
1912 { NULL },
1913 },
1914 { "Hauppauge ATSC MiniCard (B210)",
1915 { &dib0700_usb_id_table[47], NULL },
1916 { NULL },
1917 },
1918 },
1919 },
1920 };
1921
1922 int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
Linux with added FPC-III support