drivers/input/touchscreen/wacom_w8001.c

   1 /*
   2  * Wacom W8001 penabled serial touchscreen driver
   3  *
   4  * Copyright (c) 2008 Jaya Kumar
   5  * Copyright (c) 2010 Red Hat, Inc.
   6  * Copyright (c) 2010 - 2011 Ping Cheng, Wacom. <pingc@wacom.com>
   7  *
   8  * This file is subject to the terms and conditions of the GNU General Public
   9  * License. See the file COPYING in the main directory of this archive for
  10  * more details.
  11  *
  12  * Layout based on Elo serial touchscreen driver by Vojtech Pavlik
  13  */
  14
  15 #include <linux/errno.h>
  16 #include <linux/kernel.h>
  17 #include <linux/module.h>
  18 #include <linux/slab.h>
  19 #include <linux/input/mt.h>
  20 #include <linux/serio.h>
  21 #include <linux/ctype.h>
  22 #include <linux/delay.h>
  23
  24 #define DRIVER_DESC     "Wacom W8001 serial touchscreen driver"
  25
  26 MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>");
  27 MODULE_DESCRIPTION(DRIVER_DESC);
  28 MODULE_LICENSE("GPL");
  29
  30 #define W8001_MAX_LENGTH        13
  31 #define W8001_LEAD_MASK         0x80
  32 #define W8001_LEAD_BYTE         0x80
  33 #define W8001_TAB_MASK          0x40
  34 #define W8001_TAB_BYTE          0x40
  35 /* set in first byte of touch data packets */
  36 #define W8001_TOUCH_MASK        (0x10 | W8001_LEAD_MASK)
  37 #define W8001_TOUCH_BYTE        (0x10 | W8001_LEAD_BYTE)
  38
  39 #define W8001_QUERY_PACKET      0x20
  40
  41 #define W8001_CMD_STOP          '0'
  42 #define W8001_CMD_START         '1'
  43 #define W8001_CMD_QUERY         '*'
  44 #define W8001_CMD_TOUCHQUERY    '%'
  45
  46 /* length of data packets in bytes, depends on device. */
  47 #define W8001_PKTLEN_TOUCH93    5
  48 #define W8001_PKTLEN_TOUCH9A    7
  49 #define W8001_PKTLEN_TPCPEN     9
  50 #define W8001_PKTLEN_TPCCTL     11      /* control packet */
  51 #define W8001_PKTLEN_TOUCH2FG   13
  52
  53 /* resolution in points/mm */
  54 #define W8001_PEN_RESOLUTION    100
  55 #define W8001_TOUCH_RESOLUTION  10
  56
  57 struct w8001_coord {
  58         u8 rdy;
  59         u8 tsw;
  60         u8 f1;
  61         u8 f2;
  62         u16 x;
  63         u16 y;
  64         u16 pen_pressure;
  65         u8 tilt_x;
  66         u8 tilt_y;
  67 };
  68
  69 /* touch query reply packet */
  70 struct w8001_touch_query {
  71         u16 x;
  72         u16 y;
  73         u8 panel_res;
  74         u8 capacity_res;
  75         u8 sensor_id;
  76 };
  77
  78 /*
  79  * Per-touchscreen data.
  80  */
  81
  82 struct w8001 {
  83         struct input_dev *pen_dev;
  84         struct input_dev *touch_dev;
  85         struct serio *serio;
  86         struct completion cmd_done;
  87         int id;
  88         int idx;
  89         unsigned char response_type;
  90         unsigned char response[W8001_MAX_LENGTH];
  91         unsigned char data[W8001_MAX_LENGTH];
  92         char phys[32];
  93         int type;
  94         unsigned int pktlen;
  95         u16 max_touch_x;
  96         u16 max_touch_y;
  97         u16 max_pen_x;
  98         u16 max_pen_y;
  99         char pen_name[64];
 100         char touch_name[64];
 101         int open_count;
 102         struct mutex mutex;
 103 };
 104
 105 static void parse_pen_data(u8 *data, struct w8001_coord *coord)
 106 {
 107         memset(coord, 0, sizeof(*coord));
 108
 109         coord->rdy = data[0] & 0x20;
 110         coord->tsw = data[0] & 0x01;
 111         coord->f1 = data[0] & 0x02;
 112         coord->f2 = data[0] & 0x04;
 113
 114         coord->x = (data[1] & 0x7F) << 9;
 115         coord->x |= (data[2] & 0x7F) << 2;
 116         coord->x |= (data[6] & 0x60) >> 5;
 117
 118         coord->y = (data[3] & 0x7F) << 9;
 119         coord->y |= (data[4] & 0x7F) << 2;
 120         coord->y |= (data[6] & 0x18) >> 3;
 121
 122         coord->pen_pressure = data[5] & 0x7F;
 123         coord->pen_pressure |= (data[6] & 0x07) << 7 ;
 124
 125         coord->tilt_x = data[7] & 0x7F;
 126         coord->tilt_y = data[8] & 0x7F;
 127 }
 128
 129 static void parse_single_touch(u8 *data, struct w8001_coord *coord)
 130 {
 131         coord->x = (data[1] << 7) | data[2];
 132         coord->y = (data[3] << 7) | data[4];
 133         coord->tsw = data[0] & 0x01;
 134 }
 135
 136 static void scale_touch_coordinates(struct w8001 *w8001,
 137                                     unsigned int *x, unsigned int *y)
 138 {
 139         if (w8001->max_pen_x && w8001->max_touch_x)
 140                 *x = *x * w8001->max_pen_x / w8001->max_touch_x;
 141
 142         if (w8001->max_pen_y && w8001->max_touch_y)
 143                 *y = *y * w8001->max_pen_y / w8001->max_touch_y;
 144 }
 145
 146 static void parse_multi_touch(struct w8001 *w8001)
 147 {
 148         struct input_dev *dev = w8001->touch_dev;
 149         unsigned char *data = w8001->data;
 150         unsigned int x, y;
 151         int i;
 152         int count = 0;
 153
 154         for (i = 0; i < 2; i++) {
 155                 bool touch = data[0] & (1 << i);
 156
 157                 input_mt_slot(dev, i);
 158                 input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
 159                 if (touch) {
 160                         x = (data[6 * i + 1] << 7) | data[6 * i + 2];
 161                         y = (data[6 * i + 3] << 7) | data[6 * i + 4];
 162                         /* data[5,6] and [11,12] is finger capacity */
 163
 164                         /* scale to pen maximum */
 165                         scale_touch_coordinates(w8001, &x, &y);
 166
 167                         input_report_abs(dev, ABS_MT_POSITION_X, x);
 168                         input_report_abs(dev, ABS_MT_POSITION_Y, y);
 169                         count++;
 170                 }
 171         }
 172
 173         /* emulate single touch events when stylus is out of proximity.
 174          * This is to make single touch backward support consistent
 175          * across all Wacom single touch devices.
 176          */
 177         if (w8001->type != BTN_TOOL_PEN &&
 178                             w8001->type != BTN_TOOL_RUBBER) {
 179                 w8001->type = count == 1 ? BTN_TOOL_FINGER : KEY_RESERVED;
 180                 input_mt_report_pointer_emulation(dev, true);
 181         }
 182
 183         input_sync(dev);
 184 }
 185
 186 static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
 187 {
 188         memset(query, 0, sizeof(*query));
 189
 190         query->panel_res = data[1];
 191         query->sensor_id = data[2] & 0x7;
 192         query->capacity_res = data[7];
 193
 194         query->x = data[3] << 9;
 195         query->x |= data[4] << 2;
 196         query->x |= (data[2] >> 5) & 0x3;
 197
 198         query->y = data[5] << 9;
 199         query->y |= data[6] << 2;
 200         query->y |= (data[2] >> 3) & 0x3;
 201
 202         /* Early days' single-finger touch models need the following defaults */
 203         if (!query->x && !query->y) {
 204                 query->x = 1024;
 205                 query->y = 1024;
 206                 if (query->panel_res)
 207                         query->x = query->y = (1 << query->panel_res);
 208                 query->panel_res = W8001_TOUCH_RESOLUTION;
 209         }
 210 }
 211
 212 static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
 213 {
 214         struct input_dev *dev = w8001->pen_dev;
 215
 216         /*
 217          * We have 1 bit for proximity (rdy) and 3 bits for tip, side,
 218          * side2/eraser. If rdy && f2 are set, this can be either pen + side2,
 219          * or eraser. Assume:
 220          * - if dev is already in proximity and f2 is toggled → pen + side2
 221          * - if dev comes into proximity with f2 set → eraser
 222          * If f2 disappears after assuming eraser, fake proximity out for
 223          * eraser and in for pen.
 224          */
 225
 226         switch (w8001->type) {
 227         case BTN_TOOL_RUBBER:
 228                 if (!coord->f2) {
 229                         input_report_abs(dev, ABS_PRESSURE, 0);
 230                         input_report_key(dev, BTN_TOUCH, 0);
 231                         input_report_key(dev, BTN_STYLUS, 0);
 232                         input_report_key(dev, BTN_STYLUS2, 0);
 233                         input_report_key(dev, BTN_TOOL_RUBBER, 0);
 234                         input_sync(dev);
 235                         w8001->type = BTN_TOOL_PEN;
 236                 }
 237                 break;
 238
 239         case BTN_TOOL_FINGER:
 240         case KEY_RESERVED:
 241                 w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
 242                 break;
 243
 244         default:
 245                 input_report_key(dev, BTN_STYLUS2, coord->f2);
 246                 break;
 247         }
 248
 249         input_report_abs(dev, ABS_X, coord->x);
 250         input_report_abs(dev, ABS_Y, coord->y);
 251         input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure);
 252         input_report_key(dev, BTN_TOUCH, coord->tsw);
 253         input_report_key(dev, BTN_STYLUS, coord->f1);
 254         input_report_key(dev, w8001->type, coord->rdy);
 255         input_sync(dev);
 256
 257         if (!coord->rdy)
 258                 w8001->type = KEY_RESERVED;
 259 }
 260
 261 static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord)
 262 {
 263         struct input_dev *dev = w8001->touch_dev;
 264         unsigned int x = coord->x;
 265         unsigned int y = coord->y;
 266
 267         /* scale to pen maximum */
 268         scale_touch_coordinates(w8001, &x, &y);
 269
 270         input_report_abs(dev, ABS_X, x);
 271         input_report_abs(dev, ABS_Y, y);
 272         input_report_key(dev, BTN_TOUCH, coord->tsw);
 273
 274         input_sync(dev);
 275
 276         w8001->type = coord->tsw ? BTN_TOOL_FINGER : KEY_RESERVED;
 277 }
 278
 279 static irqreturn_t w8001_interrupt(struct serio *serio,
 280                                    unsigned char data, unsigned int flags)
 281 {
 282         struct w8001 *w8001 = serio_get_drvdata(serio);
 283         struct w8001_coord coord;
 284         unsigned char tmp;
 285
 286         w8001->data[w8001->idx] = data;
 287         switch (w8001->idx++) {
 288         case 0:
 289                 if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) {
 290                         pr_debug("w8001: unsynchronized data: 0x%02x\n", data);
 291                         w8001->idx = 0;
 292                 }
 293                 break;
 294
 295         case W8001_PKTLEN_TOUCH93 - 1:
 296         case W8001_PKTLEN_TOUCH9A - 1:
 297                 tmp = w8001->data[0] & W8001_TOUCH_BYTE;
 298                 if (tmp != W8001_TOUCH_BYTE)
 299                         break;
 300
 301                 if (w8001->pktlen == w8001->idx) {
 302                         w8001->idx = 0;
 303                         if (w8001->type != BTN_TOOL_PEN &&
 304                             w8001->type != BTN_TOOL_RUBBER) {
 305                                 parse_single_touch(w8001->data, &coord);
 306                                 report_single_touch(w8001, &coord);
 307                         }
 308                 }
 309                 break;
 310
 311         /* Pen coordinates packet */
 312         case W8001_PKTLEN_TPCPEN - 1:
 313                 tmp = w8001->data[0] & W8001_TAB_MASK;
 314                 if (unlikely(tmp == W8001_TAB_BYTE))
 315                         break;
 316
 317                 tmp = w8001->data[0] & W8001_TOUCH_BYTE;
 318                 if (tmp == W8001_TOUCH_BYTE)
 319                         break;
 320
 321                 w8001->idx = 0;
 322                 parse_pen_data(w8001->data, &coord);
 323                 report_pen_events(w8001, &coord);
 324                 break;
 325
 326         /* control packet */
 327         case W8001_PKTLEN_TPCCTL - 1:
 328                 tmp = w8001->data[0] & W8001_TOUCH_MASK;
 329                 if (tmp == W8001_TOUCH_BYTE)
 330                         break;
 331
 332                 w8001->idx = 0;
 333                 memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH);
 334                 w8001->response_type = W8001_QUERY_PACKET;
 335                 complete(&w8001->cmd_done);
 336                 break;
 337
 338         /* 2 finger touch packet */
 339         case W8001_PKTLEN_TOUCH2FG - 1:
 340                 w8001->idx = 0;
 341                 parse_multi_touch(w8001);
 342                 break;
 343
 344         default:
 345                 /*
 346                  * ThinkPad X60 Tablet PC (pen only device) sometimes
 347                  * sends invalid data packets that are larger than
 348                  * W8001_PKTLEN_TPCPEN. Let's start over again.
 349                  */
 350                 if (!w8001->touch_dev && w8001->idx > W8001_PKTLEN_TPCPEN - 1)
 351                         w8001->idx = 0;
 352         }
 353
 354         return IRQ_HANDLED;
 355 }
 356
 357 static int w8001_command(struct w8001 *w8001, unsigned char command,
 358                          bool wait_response)
 359 {
 360         int rc;
 361
 362         w8001->response_type = 0;
 363         init_completion(&w8001->cmd_done);
 364
 365         rc = serio_write(w8001->serio, command);
 366         if (rc == 0 && wait_response) {
 367
 368                 wait_for_completion_timeout(&w8001->cmd_done, HZ);
 369                 if (w8001->response_type != W8001_QUERY_PACKET)
 370                         rc = -EIO;
 371         }
 372
 373         return rc;
 374 }
 375
 376 static int w8001_open(struct input_dev *dev)
 377 {
 378         struct w8001 *w8001 = input_get_drvdata(dev);
 379         int err;
 380
 381         err = mutex_lock_interruptible(&w8001->mutex);
 382         if (err)
 383                 return err;
 384
 385         if (w8001->open_count++ == 0) {
 386                 err = w8001_command(w8001, W8001_CMD_START, false);
 387                 if (err)
 388                         w8001->open_count--;
 389         }
 390
 391         mutex_unlock(&w8001->mutex);
 392         return err;
 393 }
 394
 395 static void w8001_close(struct input_dev *dev)
 396 {
 397         struct w8001 *w8001 = input_get_drvdata(dev);
 398
 399         mutex_lock(&w8001->mutex);
 400
 401         if (--w8001->open_count == 0)
 402                 w8001_command(w8001, W8001_CMD_STOP, false);
 403
 404         mutex_unlock(&w8001->mutex);
 405 }
 406
 407 static int w8001_detect(struct w8001 *w8001)
 408 {
 409         int error;
 410
 411         error = w8001_command(w8001, W8001_CMD_STOP, false);
 412         if (error)
 413                 return error;
 414
 415         msleep(250);    /* wait 250ms before querying the device */
 416
 417         return 0;
 418 }
 419
 420 static int w8001_setup_pen(struct w8001 *w8001, char *basename,
 421                            size_t basename_sz)
 422 {
 423         struct input_dev *dev = w8001->pen_dev;
 424         struct w8001_coord coord;
 425         int error;
 426
 427         /* penabled? */
 428         error = w8001_command(w8001, W8001_CMD_QUERY, true);
 429         if (error)
 430                 return error;
 431
 432         __set_bit(EV_KEY, dev->evbit);
 433         __set_bit(EV_ABS, dev->evbit);
 434         __set_bit(BTN_TOUCH, dev->keybit);
 435         __set_bit(BTN_TOOL_PEN, dev->keybit);
 436         __set_bit(BTN_TOOL_RUBBER, dev->keybit);
 437         __set_bit(BTN_STYLUS, dev->keybit);
 438         __set_bit(BTN_STYLUS2, dev->keybit);
 439         __set_bit(INPUT_PROP_DIRECT, dev->propbit);
 440
 441         parse_pen_data(w8001->response, &coord);
 442         w8001->max_pen_x = coord.x;
 443         w8001->max_pen_y = coord.y;
 444
 445         input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
 446         input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
 447         input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
 448         input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
 449         input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
 450         if (coord.tilt_x && coord.tilt_y) {
 451                 input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
 452                 input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
 453         }
 454
 455         w8001->id = 0x90;
 456         strlcat(basename, " Penabled", basename_sz);
 457
 458         return 0;
 459 }
 460
 461 static int w8001_setup_touch(struct w8001 *w8001, char *basename,
 462                              size_t basename_sz)
 463 {
 464         struct input_dev *dev = w8001->touch_dev;
 465         struct w8001_touch_query touch;
 466         int error;
 467
 468
 469         /* Touch enabled? */
 470         error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
 471         if (error)
 472                 return error;
 473         /*
 474          * Some non-touch devices may reply to the touch query. But their
 475          * second byte is empty, which indicates touch is not supported.
 476          */
 477         if (!w8001->response[1])
 478                 return -ENXIO;
 479
 480         __set_bit(EV_KEY, dev->evbit);
 481         __set_bit(EV_ABS, dev->evbit);
 482         __set_bit(BTN_TOUCH, dev->keybit);
 483         __set_bit(INPUT_PROP_DIRECT, dev->propbit);
 484
 485         parse_touchquery(w8001->response, &touch);
 486         w8001->max_touch_x = touch.x;
 487         w8001->max_touch_y = touch.y;
 488
 489         if (w8001->max_pen_x && w8001->max_pen_y) {
 490                 /* if pen is supported scale to pen maximum */
 491                 touch.x = w8001->max_pen_x;
 492                 touch.y = w8001->max_pen_y;
 493                 touch.panel_res = W8001_PEN_RESOLUTION;
 494         }
 495
 496         input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
 497         input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
 498         input_abs_set_res(dev, ABS_X, touch.panel_res);
 499         input_abs_set_res(dev, ABS_Y, touch.panel_res);
 500
 501         switch (touch.sensor_id) {
 502         case 0:
 503         case 2:
 504                 w8001->pktlen = W8001_PKTLEN_TOUCH93;
 505                 w8001->id = 0x93;
 506                 strlcat(basename, " 1FG", basename_sz);
 507                 break;
 508
 509         case 1:
 510         case 3:
 511         case 4:
 512                 w8001->pktlen = W8001_PKTLEN_TOUCH9A;
 513                 strlcat(basename, " 1FG", basename_sz);
 514                 w8001->id = 0x9a;
 515                 break;
 516
 517         case 5:
 518                 w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
 519
 520                 __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
 521                 error = input_mt_init_slots(dev, 2, 0);
 522                 if (error) {
 523                         dev_err(&w8001->serio->dev,
 524                                 "failed to initialize MT slots: %d\n", error);
 525                         return error;
 526                 }
 527
 528                 input_set_abs_params(dev, ABS_MT_POSITION_X,
 529                                         0, touch.x, 0, 0);
 530                 input_set_abs_params(dev, ABS_MT_POSITION_Y,
 531                                         0, touch.y, 0, 0);
 532                 input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
 533                                         0, MT_TOOL_MAX, 0, 0);
 534                 input_abs_set_res(dev, ABS_MT_POSITION_X, touch.panel_res);
 535                 input_abs_set_res(dev, ABS_MT_POSITION_Y, touch.panel_res);
 536
 537                 strlcat(basename, " 2FG", basename_sz);
 538                 if (w8001->max_pen_x && w8001->max_pen_y)
 539                         w8001->id = 0xE3;
 540                 else
 541                         w8001->id = 0xE2;
 542                 break;
 543         }
 544
 545         strlcat(basename, " Touchscreen", basename_sz);
 546
 547         return 0;
 548 }
 549
 550 static void w8001_set_devdata(struct input_dev *dev, struct w8001 *w8001,
 551                               struct serio *serio)
 552 {
 553         dev->phys = w8001->phys;
 554         dev->id.bustype = BUS_RS232;
 555         dev->id.product = w8001->id;
 556         dev->id.vendor = 0x056a;
 557         dev->id.version = 0x0100;
 558         dev->open = w8001_open;
 559         dev->close = w8001_close;
 560
 561         dev->dev.parent = &serio->dev;
 562
 563         input_set_drvdata(dev, w8001);
 564 }
 565
 566 /*
 567  * w8001_disconnect() is the opposite of w8001_connect()
 568  */
 569
 570 static void w8001_disconnect(struct serio *serio)
 571 {
 572         struct w8001 *w8001 = serio_get_drvdata(serio);
 573
 574         serio_close(serio);
 575
 576         if (w8001->pen_dev)
 577                 input_unregister_device(w8001->pen_dev);
 578         if (w8001->touch_dev)
 579                 input_unregister_device(w8001->touch_dev);
 580         kfree(w8001);
 581
 582         serio_set_drvdata(serio, NULL);
 583 }
 584
 585 /*
 586  * w8001_connect() is the routine that is called when someone adds a
 587  * new serio device that supports the w8001 protocol and registers it as
 588  * an input device.
 589  */
 590
 591 static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 592 {
 593         struct w8001 *w8001;
 594         struct input_dev *input_dev_pen;
 595         struct input_dev *input_dev_touch;
 596         char basename[64];
 597         int err, err_pen, err_touch;
 598
 599         w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL);
 600         input_dev_pen = input_allocate_device();
 601         input_dev_touch = input_allocate_device();
 602         if (!w8001 || !input_dev_pen || !input_dev_touch) {
 603                 err = -ENOMEM;
 604                 goto fail1;
 605         }
 606
 607         w8001->serio = serio;
 608         w8001->pen_dev = input_dev_pen;
 609         w8001->touch_dev = input_dev_touch;
 610         mutex_init(&w8001->mutex);
 611         init_completion(&w8001->cmd_done);
 612         snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
 613
 614         serio_set_drvdata(serio, w8001);
 615         err = serio_open(serio, drv);
 616         if (err)
 617                 goto fail2;
 618
 619         err = w8001_detect(w8001);
 620         if (err)
 621                 goto fail3;
 622
 623         /* For backwards-compatibility we compose the basename based on
 624          * capabilities and then just append the tool type
 625          */
 626         strlcpy(basename, "Wacom Serial", sizeof(basename));
 627
 628         err_pen = w8001_setup_pen(w8001, basename, sizeof(basename));
 629         err_touch = w8001_setup_touch(w8001, basename, sizeof(basename));
 630         if (err_pen && err_touch) {
 631                 err = -ENXIO;
 632                 goto fail3;
 633         }
 634
 635         if (!err_pen) {
 636                 strlcpy(w8001->pen_name, basename, sizeof(w8001->pen_name));
 637                 strlcat(w8001->pen_name, " Pen", sizeof(w8001->pen_name));
 638                 input_dev_pen->name = w8001->pen_name;
 639
 640                 w8001_set_devdata(input_dev_pen, w8001, serio);
 641
 642                 err = input_register_device(w8001->pen_dev);
 643                 if (err)
 644                         goto fail3;
 645         } else {
 646                 input_free_device(input_dev_pen);
 647                 input_dev_pen = NULL;
 648                 w8001->pen_dev = NULL;
 649         }
 650
 651         if (!err_touch) {
 652                 strlcpy(w8001->touch_name, basename, sizeof(w8001->touch_name));
 653                 strlcat(w8001->touch_name, " Finger",
 654                         sizeof(w8001->touch_name));
 655                 input_dev_touch->name = w8001->touch_name;
 656
 657                 w8001_set_devdata(input_dev_touch, w8001, serio);
 658
 659                 err = input_register_device(w8001->touch_dev);
 660                 if (err)
 661                         goto fail4;
 662         } else {
 663                 input_free_device(input_dev_touch);
 664                 input_dev_touch = NULL;
 665                 w8001->touch_dev = NULL;
 666         }
 667
 668         return 0;
 669
 670 fail4:
 671         if (w8001->pen_dev)
 672                 input_unregister_device(w8001->pen_dev);
 673 fail3:
 674         serio_close(serio);
 675 fail2:
 676         serio_set_drvdata(serio, NULL);
 677 fail1:
 678         input_free_device(input_dev_pen);
 679         input_free_device(input_dev_touch);
 680         kfree(w8001);
 681         return err;
 682 }
 683
 684 static struct serio_device_id w8001_serio_ids[] = {
 685         {
 686                 .type   = SERIO_RS232,
 687                 .proto  = SERIO_W8001,
 688                 .id     = SERIO_ANY,
 689                 .extra  = SERIO_ANY,
 690         },
 691         { 0 }
 692 };
 693
 694 MODULE_DEVICE_TABLE(serio, w8001_serio_ids);
 695
 696 static struct serio_driver w8001_drv = {
 697         .driver         = {
 698                 .name   = "w8001",
 699         },
 700         .description    = DRIVER_DESC,
 701         .id_table       = w8001_serio_ids,
 702         .interrupt      = w8001_interrupt,
 703         .connect        = w8001_connect,
 704         .disconnect     = w8001_disconnect,
 705 };
 706
 707 module_serio_driver(w8001_drv);