?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
rcu: Maintain special bits at bottom of ->dynticks counter
[linux/fpc-iii.git] / drivers / leds / leds-bd2802.c
blob6b4de762a760857da3b22ba5feeaf9a49dee5c56
1 /*
2 * leds-bd2802.c - RGB LED Driver
3 *
4 * Copyright (C) 2009 Samsung Electronics
5 * Kim Kyuwon <q1.kim@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf
12 *
13 */
14
15 #include <linux/module.h>
16 #include <linux/i2c.h>
17 #include <linux/gpio.h>
18 #include <linux/delay.h>
19 #include <linux/leds.h>
20 #include <linux/leds-bd2802.h>
21 #include <linux/slab.h>
22 #include <linux/pm.h>
23
24 #define LED_CTL(rgb2en, rgb1en) ((rgb2en) << 4 | ((rgb1en) << 0))
25
26 #define BD2802_LED_OFFSET 0xa
27 #define BD2802_COLOR_OFFSET 0x3
28
29 #define BD2802_REG_CLKSETUP 0x00
30 #define BD2802_REG_CONTROL 0x01
31 #define BD2802_REG_HOURSETUP 0x02
32 #define BD2802_REG_CURRENT1SETUP 0x03
33 #define BD2802_REG_CURRENT2SETUP 0x04
34 #define BD2802_REG_WAVEPATTERN 0x05
35
36 #define BD2802_CURRENT_032 0x10 /* 3.2mA */
37 #define BD2802_CURRENT_000 0x00 /* 0.0mA */
38
39 #define BD2802_PATTERN_FULL 0x07
40 #define BD2802_PATTERN_HALF 0x03
41
42 enum led_ids {
43 LED1,
44 LED2,
45 LED_NUM,
46 };
47
48 enum led_colors {
49 RED,
50 GREEN,
51 BLUE,
52 };
53
54 enum led_bits {
55 BD2802_OFF,
56 BD2802_BLINK,
57 BD2802_ON,
58 };
59
60 /*
61 * State '0' : 'off'
62 * State '1' : 'blink'
63 * State '2' : 'on'.
64 */
65 struct led_state {
66 unsigned r:2;
67 unsigned g:2;
68 unsigned b:2;
69 };
70
71 struct bd2802_led {
72 struct bd2802_led_platform_data *pdata;
73 struct i2c_client *client;
74 struct rw_semaphore rwsem;
75
76 struct led_state led[2];
77
78 /*
79 * Making led_classdev as array is not recommended, because array
80 * members prevent using 'container_of' macro. So repetitive works
81 * are needed.
82 */
83 struct led_classdev cdev_led1r;
84 struct led_classdev cdev_led1g;
85 struct led_classdev cdev_led1b;
86 struct led_classdev cdev_led2r;
87 struct led_classdev cdev_led2g;
88 struct led_classdev cdev_led2b;
89
90 /*
91 * Advanced Configuration Function(ADF) mode:
92 * In ADF mode, user can set registers of BD2802GU directly,
93 * therefore BD2802GU doesn't enter reset state.
94 */
95 int adf_on;
96
97 enum led_ids led_id;
98 enum led_colors color;
99 enum led_bits state;
100
101 /* General attributes of RGB LEDs */
102 int wave_pattern;
103 int rgb_current;
104 };
105
106
107 /*--------------------------------------------------------------*/
108 /* BD2802GU helper functions */
109 /*--------------------------------------------------------------*/
110
111 static inline int bd2802_is_rgb_off(struct bd2802_led *led, enum led_ids id,
112 enum led_colors color)
113 {
114 switch (color) {
115 case RED:
116 return !led->led[id].r;
117 case GREEN:
118 return !led->led[id].g;
119 case BLUE:
120 return !led->led[id].b;
121 default:
122 dev_err(&led->client->dev, "%s: Invalid color\n", __func__);
123 return -EINVAL;
124 }
125 }
126
127 static inline int bd2802_is_led_off(struct bd2802_led *led, enum led_ids id)
128 {
129 if (led->led[id].r || led->led[id].g || led->led[id].b)
130 return 0;
131
132 return 1;
133 }
134
135 static inline int bd2802_is_all_off(struct bd2802_led *led)
136 {
137 int i;
138
139 for (i = 0; i < LED_NUM; i++)
140 if (!bd2802_is_led_off(led, i))
141 return 0;
142
143 return 1;
144 }
145
146 static inline u8 bd2802_get_base_offset(enum led_ids id, enum led_colors color)
147 {
148 return id * BD2802_LED_OFFSET + color * BD2802_COLOR_OFFSET;
149 }
150
151 static inline u8 bd2802_get_reg_addr(enum led_ids id, enum led_colors color,
152 u8 reg_offset)
153 {
154 return reg_offset + bd2802_get_base_offset(id, color);
155 }
156
157
158 /*--------------------------------------------------------------*/
159 /* BD2802GU core functions */
160 /*--------------------------------------------------------------*/
161
162 static int bd2802_write_byte(struct i2c_client *client, u8 reg, u8 val)
163 {
164 int ret = i2c_smbus_write_byte_data(client, reg, val);
165 if (ret >= 0)
166 return 0;
167
168 dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
169 __func__, reg, val, ret);
170
171 return ret;
172 }
173
174 static void bd2802_update_state(struct bd2802_led *led, enum led_ids id,
175 enum led_colors color, enum led_bits led_bit)
176 {
177 int i;
178 u8 value;
179
180 for (i = 0; i < LED_NUM; i++) {
181 if (i == id) {
182 switch (color) {
183 case RED:
184 led->led[i].r = led_bit;
185 break;
186 case GREEN:
187 led->led[i].g = led_bit;
188 break;
189 case BLUE:
190 led->led[i].b = led_bit;
191 break;
192 default:
193 dev_err(&led->client->dev,
194 "%s: Invalid color\n", __func__);
195 return;
196 }
197 }
198 }
199
200 if (led_bit == BD2802_BLINK || led_bit == BD2802_ON)
201 return;
202
203 if (!bd2802_is_led_off(led, id))
204 return;
205
206 if (bd2802_is_all_off(led) && !led->adf_on) {
207 gpio_set_value(led->pdata->reset_gpio, 0);
208 return;
209 }
210
211 /*
212 * In this case, other led is turned on, and current led is turned
213 * off. So set RGB LED Control register to stop the current RGB LED
214 */
215 value = (id == LED1) ? LED_CTL(1, 0) : LED_CTL(0, 1);
216 bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
217 }
218
219 static void bd2802_configure(struct bd2802_led *led)
220 {
221 struct bd2802_led_platform_data *pdata = led->pdata;
222 u8 reg;
223
224 reg = bd2802_get_reg_addr(LED1, RED, BD2802_REG_HOURSETUP);
225 bd2802_write_byte(led->client, reg, pdata->rgb_time);
226
227 reg = bd2802_get_reg_addr(LED2, RED, BD2802_REG_HOURSETUP);
228 bd2802_write_byte(led->client, reg, pdata->rgb_time);
229 }
230
231 static void bd2802_reset_cancel(struct bd2802_led *led)
232 {
233 gpio_set_value(led->pdata->reset_gpio, 1);
234 udelay(100);
235 bd2802_configure(led);
236 }
237
238 static void bd2802_enable(struct bd2802_led *led, enum led_ids id)
239 {
240 enum led_ids other_led = (id == LED1) ? LED2 : LED1;
241 u8 value, other_led_on;
242
243 other_led_on = !bd2802_is_led_off(led, other_led);
244 if (id == LED1)
245 value = LED_CTL(other_led_on, 1);
246 else
247 value = LED_CTL(1 , other_led_on);
248
249 bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
250 }
251
252 static void bd2802_set_on(struct bd2802_led *led, enum led_ids id,
253 enum led_colors color)
254 {
255 u8 reg;
256
257 if (bd2802_is_all_off(led) && !led->adf_on)
258 bd2802_reset_cancel(led);
259
260 reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
261 bd2802_write_byte(led->client, reg, led->rgb_current);
262 reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
263 bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
264 reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
265 bd2802_write_byte(led->client, reg, BD2802_PATTERN_FULL);
266
267 bd2802_enable(led, id);
268 bd2802_update_state(led, id, color, BD2802_ON);
269 }
270
271 static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id,
272 enum led_colors color)
273 {
274 u8 reg;
275
276 if (bd2802_is_all_off(led) && !led->adf_on)
277 bd2802_reset_cancel(led);
278
279 reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
280 bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
281 reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
282 bd2802_write_byte(led->client, reg, led->rgb_current);
283 reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
284 bd2802_write_byte(led->client, reg, led->wave_pattern);
285
286 bd2802_enable(led, id);
287 bd2802_update_state(led, id, color, BD2802_BLINK);
288 }
289
290 static void bd2802_turn_on(struct bd2802_led *led, enum led_ids id,
291 enum led_colors color, enum led_bits led_bit)
292 {
293 if (led_bit == BD2802_OFF) {
294 dev_err(&led->client->dev,
295 "Only 'blink' and 'on' are allowed\n");
296 return;
297 }
298
299 if (led_bit == BD2802_BLINK)
300 bd2802_set_blink(led, id, color);
301 else
302 bd2802_set_on(led, id, color);
303 }
304
305 static void bd2802_turn_off(struct bd2802_led *led, enum led_ids id,
306 enum led_colors color)
307 {
308 u8 reg;
309
310 if (bd2802_is_rgb_off(led, id, color))
311 return;
312
313 reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
314 bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
315 reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
316 bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
317
318 bd2802_update_state(led, id, color, BD2802_OFF);
319 }
320
321 #define BD2802_SET_REGISTER(reg_addr, reg_name) \
322 static ssize_t bd2802_store_reg##reg_addr(struct device *dev, \
323 struct device_attribute *attr, const char *buf, size_t count) \
324 { \
325 struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
326 unsigned long val; \
327 int ret; \
328 if (!count) \
329 return -EINVAL; \
330 ret = kstrtoul(buf, 16, &val); \
331 if (ret) \
332 return ret; \
333 down_write(&led->rwsem); \
334 bd2802_write_byte(led->client, reg_addr, (u8) val); \
335 up_write(&led->rwsem); \
336 return count; \
337 } \
338 static struct device_attribute bd2802_reg##reg_addr##_attr = { \
339 .attr = {.name = reg_name, .mode = 0644}, \
340 .store = bd2802_store_reg##reg_addr, \
341 };
342
343 BD2802_SET_REGISTER(0x00, "0x00");
344 BD2802_SET_REGISTER(0x01, "0x01");
345 BD2802_SET_REGISTER(0x02, "0x02");
346 BD2802_SET_REGISTER(0x03, "0x03");
347 BD2802_SET_REGISTER(0x04, "0x04");
348 BD2802_SET_REGISTER(0x05, "0x05");
349 BD2802_SET_REGISTER(0x06, "0x06");
350 BD2802_SET_REGISTER(0x07, "0x07");
351 BD2802_SET_REGISTER(0x08, "0x08");
352 BD2802_SET_REGISTER(0x09, "0x09");
353 BD2802_SET_REGISTER(0x0a, "0x0a");
354 BD2802_SET_REGISTER(0x0b, "0x0b");
355 BD2802_SET_REGISTER(0x0c, "0x0c");
356 BD2802_SET_REGISTER(0x0d, "0x0d");
357 BD2802_SET_REGISTER(0x0e, "0x0e");
358 BD2802_SET_REGISTER(0x0f, "0x0f");
359 BD2802_SET_REGISTER(0x10, "0x10");
360 BD2802_SET_REGISTER(0x11, "0x11");
361 BD2802_SET_REGISTER(0x12, "0x12");
362 BD2802_SET_REGISTER(0x13, "0x13");
363 BD2802_SET_REGISTER(0x14, "0x14");
364 BD2802_SET_REGISTER(0x15, "0x15");
365
366 static struct device_attribute *bd2802_addr_attributes[] = {
367 &bd2802_reg0x00_attr,
368 &bd2802_reg0x01_attr,
369 &bd2802_reg0x02_attr,
370 &bd2802_reg0x03_attr,
371 &bd2802_reg0x04_attr,
372 &bd2802_reg0x05_attr,
373 &bd2802_reg0x06_attr,
374 &bd2802_reg0x07_attr,
375 &bd2802_reg0x08_attr,
376 &bd2802_reg0x09_attr,
377 &bd2802_reg0x0a_attr,
378 &bd2802_reg0x0b_attr,
379 &bd2802_reg0x0c_attr,
380 &bd2802_reg0x0d_attr,
381 &bd2802_reg0x0e_attr,
382 &bd2802_reg0x0f_attr,
383 &bd2802_reg0x10_attr,
384 &bd2802_reg0x11_attr,
385 &bd2802_reg0x12_attr,
386 &bd2802_reg0x13_attr,
387 &bd2802_reg0x14_attr,
388 &bd2802_reg0x15_attr,
389 };
390
391 static void bd2802_enable_adv_conf(struct bd2802_led *led)
392 {
393 int i, ret;
394
395 for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++) {
396 ret = device_create_file(&led->client->dev,
397 bd2802_addr_attributes[i]);
398 if (ret) {
399 dev_err(&led->client->dev, "failed: sysfs file %s\n",
400 bd2802_addr_attributes[i]->attr.name);
401 goto failed_remove_files;
402 }
403 }
404
405 if (bd2802_is_all_off(led))
406 bd2802_reset_cancel(led);
407
408 led->adf_on = 1;
409
410 return;
411
412 failed_remove_files:
413 for (i--; i >= 0; i--)
414 device_remove_file(&led->client->dev,
415 bd2802_addr_attributes[i]);
416 }
417
418 static void bd2802_disable_adv_conf(struct bd2802_led *led)
419 {
420 int i;
421
422 for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++)
423 device_remove_file(&led->client->dev,
424 bd2802_addr_attributes[i]);
425
426 if (bd2802_is_all_off(led))
427 gpio_set_value(led->pdata->reset_gpio, 0);
428
429 led->adf_on = 0;
430 }
431
432 static ssize_t bd2802_show_adv_conf(struct device *dev,
433 struct device_attribute *attr, char *buf)
434 {
435 struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
436 ssize_t ret;
437
438 down_read(&led->rwsem);
439 if (led->adf_on)
440 ret = sprintf(buf, "on\n");
441 else
442 ret = sprintf(buf, "off\n");
443 up_read(&led->rwsem);
444
445 return ret;
446 }
447
448 static ssize_t bd2802_store_adv_conf(struct device *dev,
449 struct device_attribute *attr, const char *buf, size_t count)
450 {
451 struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
452
453 if (!count)
454 return -EINVAL;
455
456 down_write(&led->rwsem);
457 if (!led->adf_on && !strncmp(buf, "on", 2))
458 bd2802_enable_adv_conf(led);
459 else if (led->adf_on && !strncmp(buf, "off", 3))
460 bd2802_disable_adv_conf(led);
461 up_write(&led->rwsem);
462
463 return count;
464 }
465
466 static struct device_attribute bd2802_adv_conf_attr = {
467 .attr = {
468 .name = "advanced_configuration",
469 .mode = 0644,
470 },
471 .show = bd2802_show_adv_conf,
472 .store = bd2802_store_adv_conf,
473 };
474
475 #define BD2802_CONTROL_ATTR(attr_name, name_str) \
476 static ssize_t bd2802_show_##attr_name(struct device *dev, \
477 struct device_attribute *attr, char *buf) \
478 { \
479 struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
480 ssize_t ret; \
481 down_read(&led->rwsem); \
482 ret = sprintf(buf, "0x%02x\n", led->attr_name); \
483 up_read(&led->rwsem); \
484 return ret; \
485 } \
486 static ssize_t bd2802_store_##attr_name(struct device *dev, \
487 struct device_attribute *attr, const char *buf, size_t count) \
488 { \
489 struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
490 unsigned long val; \
491 int ret; \
492 if (!count) \
493 return -EINVAL; \
494 ret = kstrtoul(buf, 16, &val); \
495 if (ret) \
496 return ret; \
497 down_write(&led->rwsem); \
498 led->attr_name = val; \
499 up_write(&led->rwsem); \
500 return count; \
501 } \
502 static struct device_attribute bd2802_##attr_name##_attr = { \
503 .attr = { \
504 .name = name_str, \
505 .mode = 0644, \
506 }, \
507 .show = bd2802_show_##attr_name, \
508 .store = bd2802_store_##attr_name, \
509 };
510
511 BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
512 BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
513
514 static struct device_attribute *bd2802_attributes[] = {
515 &bd2802_adv_conf_attr,
516 &bd2802_wave_pattern_attr,
517 &bd2802_rgb_current_attr,
518 };
519
520 #define BD2802_CONTROL_RGBS(name, id, clr) \
521 static int bd2802_set_##name##_brightness(struct led_classdev *led_cdev,\
522 enum led_brightness value) \
523 { \
524 struct bd2802_led *led = \
525 container_of(led_cdev, struct bd2802_led, cdev_##name); \
526 led->led_id = id; \
527 led->color = clr; \
528 if (value == LED_OFF) { \
529 led->state = BD2802_OFF; \
530 bd2802_turn_off(led, led->led_id, led->color); \
531 } else { \
532 led->state = BD2802_ON; \
533 bd2802_turn_on(led, led->led_id, led->color, BD2802_ON);\
534 } \
535 return 0; \
536 } \
537 static int bd2802_set_##name##_blink(struct led_classdev *led_cdev, \
538 unsigned long *delay_on, unsigned long *delay_off) \
539 { \
540 struct bd2802_led *led = \
541 container_of(led_cdev, struct bd2802_led, cdev_##name); \
542 if (*delay_on == 0 || *delay_off == 0) \
543 return -EINVAL; \
544 led->led_id = id; \
545 led->color = clr; \
546 led->state = BD2802_BLINK; \
547 bd2802_turn_on(led, led->led_id, led->color, BD2802_BLINK); \
548 return 0; \
549 }
550
551 BD2802_CONTROL_RGBS(led1r, LED1, RED);
552 BD2802_CONTROL_RGBS(led1g, LED1, GREEN);
553 BD2802_CONTROL_RGBS(led1b, LED1, BLUE);
554 BD2802_CONTROL_RGBS(led2r, LED2, RED);
555 BD2802_CONTROL_RGBS(led2g, LED2, GREEN);
556 BD2802_CONTROL_RGBS(led2b, LED2, BLUE);
557
558 static int bd2802_register_led_classdev(struct bd2802_led *led)
559 {
560 int ret;
561
562 led->cdev_led1r.name = "led1_R";
563 led->cdev_led1r.brightness = LED_OFF;
564 led->cdev_led1r.brightness_set_blocking = bd2802_set_led1r_brightness;
565 led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
566
567 ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
568 if (ret < 0) {
569 dev_err(&led->client->dev, "couldn't register LED %s\n",
570 led->cdev_led1r.name);
571 goto failed_unregister_led1_R;
572 }
573
574 led->cdev_led1g.name = "led1_G";
575 led->cdev_led1g.brightness = LED_OFF;
576 led->cdev_led1g.brightness_set_blocking = bd2802_set_led1g_brightness;
577 led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
578
579 ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
580 if (ret < 0) {
581 dev_err(&led->client->dev, "couldn't register LED %s\n",
582 led->cdev_led1g.name);
583 goto failed_unregister_led1_G;
584 }
585
586 led->cdev_led1b.name = "led1_B";
587 led->cdev_led1b.brightness = LED_OFF;
588 led->cdev_led1b.brightness_set_blocking = bd2802_set_led1b_brightness;
589 led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
590
591 ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
592 if (ret < 0) {
593 dev_err(&led->client->dev, "couldn't register LED %s\n",
594 led->cdev_led1b.name);
595 goto failed_unregister_led1_B;
596 }
597
598 led->cdev_led2r.name = "led2_R";
599 led->cdev_led2r.brightness = LED_OFF;
600 led->cdev_led2r.brightness_set_blocking = bd2802_set_led2r_brightness;
601 led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
602
603 ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
604 if (ret < 0) {
605 dev_err(&led->client->dev, "couldn't register LED %s\n",
606 led->cdev_led2r.name);
607 goto failed_unregister_led2_R;
608 }
609
610 led->cdev_led2g.name = "led2_G";
611 led->cdev_led2g.brightness = LED_OFF;
612 led->cdev_led2g.brightness_set_blocking = bd2802_set_led2g_brightness;
613 led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
614
615 ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
616 if (ret < 0) {
617 dev_err(&led->client->dev, "couldn't register LED %s\n",
618 led->cdev_led2g.name);
619 goto failed_unregister_led2_G;
620 }
621
622 led->cdev_led2b.name = "led2_B";
623 led->cdev_led2b.brightness = LED_OFF;
624 led->cdev_led2b.brightness_set_blocking = bd2802_set_led2b_brightness;
625 led->cdev_led2b.blink_set = bd2802_set_led2b_blink;
626 led->cdev_led2b.flags |= LED_CORE_SUSPENDRESUME;
627
628 ret = led_classdev_register(&led->client->dev, &led->cdev_led2b);
629 if (ret < 0) {
630 dev_err(&led->client->dev, "couldn't register LED %s\n",
631 led->cdev_led2b.name);
632 goto failed_unregister_led2_B;
633 }
634
635 return 0;
636
637 failed_unregister_led2_B:
638 led_classdev_unregister(&led->cdev_led2g);
639 failed_unregister_led2_G:
640 led_classdev_unregister(&led->cdev_led2r);
641 failed_unregister_led2_R:
642 led_classdev_unregister(&led->cdev_led1b);
643 failed_unregister_led1_B:
644 led_classdev_unregister(&led->cdev_led1g);
645 failed_unregister_led1_G:
646 led_classdev_unregister(&led->cdev_led1r);
647 failed_unregister_led1_R:
648
649 return ret;
650 }
651
652 static void bd2802_unregister_led_classdev(struct bd2802_led *led)
653 {
654 led_classdev_unregister(&led->cdev_led2b);
655 led_classdev_unregister(&led->cdev_led2g);
656 led_classdev_unregister(&led->cdev_led2r);
657 led_classdev_unregister(&led->cdev_led1b);
658 led_classdev_unregister(&led->cdev_led1g);
659 led_classdev_unregister(&led->cdev_led1r);
660 }
661
662 static int bd2802_probe(struct i2c_client *client,
663 const struct i2c_device_id *id)
664 {
665 struct bd2802_led *led;
666 struct bd2802_led_platform_data *pdata;
667 int ret, i;
668
669 led = devm_kzalloc(&client->dev, sizeof(struct bd2802_led), GFP_KERNEL);
670 if (!led)
671 return -ENOMEM;
672
673 led->client = client;
674 pdata = led->pdata = dev_get_platdata(&client->dev);
675 i2c_set_clientdata(client, led);
676
677 /* Configure RESET GPIO (L: RESET, H: RESET cancel) */
678 gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB");
679
680 /* Tacss = min 0.1ms */
681 udelay(100);
682
683 /* Detect BD2802GU */
684 ret = bd2802_write_byte(client, BD2802_REG_CLKSETUP, 0x00);
685 if (ret < 0) {
686 dev_err(&client->dev, "failed to detect device\n");
687 return ret;
688 } else
689 dev_info(&client->dev, "return 0x%02x\n", ret);
690
691 /* To save the power, reset BD2802 after detecting */
692 gpio_set_value(led->pdata->reset_gpio, 0);
693
694 /* Default attributes */
695 led->wave_pattern = BD2802_PATTERN_HALF;
696 led->rgb_current = BD2802_CURRENT_032;
697
698 init_rwsem(&led->rwsem);
699
700 for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
701 ret = device_create_file(&led->client->dev,
702 bd2802_attributes[i]);
703 if (ret) {
704 dev_err(&led->client->dev, "failed: sysfs file %s\n",
705 bd2802_attributes[i]->attr.name);
706 goto failed_unregister_dev_file;
707 }
708 }
709
710 ret = bd2802_register_led_classdev(led);
711 if (ret < 0)
712 goto failed_unregister_dev_file;
713
714 return 0;
715
716 failed_unregister_dev_file:
717 for (i--; i >= 0; i--)
718 device_remove_file(&led->client->dev, bd2802_attributes[i]);
719 return ret;
720 }
721
722 static int bd2802_remove(struct i2c_client *client)
723 {
724 struct bd2802_led *led = i2c_get_clientdata(client);
725 int i;
726
727 gpio_set_value(led->pdata->reset_gpio, 0);
728 bd2802_unregister_led_classdev(led);
729 if (led->adf_on)
730 bd2802_disable_adv_conf(led);
731 for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
732 device_remove_file(&led->client->dev, bd2802_attributes[i]);
733
734 return 0;
735 }
736
737 #ifdef CONFIG_PM_SLEEP
738 static void bd2802_restore_state(struct bd2802_led *led)
739 {
740 int i;
741
742 for (i = 0; i < LED_NUM; i++) {
743 if (led->led[i].r)
744 bd2802_turn_on(led, i, RED, led->led[i].r);
745 if (led->led[i].g)
746 bd2802_turn_on(led, i, GREEN, led->led[i].g);
747 if (led->led[i].b)
748 bd2802_turn_on(led, i, BLUE, led->led[i].b);
749 }
750 }
751
752 static int bd2802_suspend(struct device *dev)
753 {
754 struct i2c_client *client = to_i2c_client(dev);
755 struct bd2802_led *led = i2c_get_clientdata(client);
756
757 gpio_set_value(led->pdata->reset_gpio, 0);
758
759 return 0;
760 }
761
762 static int bd2802_resume(struct device *dev)
763 {
764 struct i2c_client *client = to_i2c_client(dev);
765 struct bd2802_led *led = i2c_get_clientdata(client);
766
767 if (!bd2802_is_all_off(led) || led->adf_on) {
768 bd2802_reset_cancel(led);
769 bd2802_restore_state(led);
770 }
771
772 return 0;
773 }
774 #endif
775
776 static SIMPLE_DEV_PM_OPS(bd2802_pm, bd2802_suspend, bd2802_resume);
777
778 static const struct i2c_device_id bd2802_id[] = {
779 { "BD2802", 0 },
780 { }
781 };
782 MODULE_DEVICE_TABLE(i2c, bd2802_id);
783
784 static struct i2c_driver bd2802_i2c_driver = {
785 .driver = {
786 .name = "BD2802",
787 .pm = &bd2802_pm,
788 },
789 .probe = bd2802_probe,
790 .remove = bd2802_remove,
791 .id_table = bd2802_id,
792 };
793
794 module_i2c_driver(bd2802_i2c_driver);
795
796 MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
797 MODULE_DESCRIPTION("BD2802 LED driver");
798 MODULE_LICENSE("GPL v2");
Linux with added FPC-III support