rcu: Maintain special bits at bottom of ->dynticks counter
[linux/fpc-iii.git] / drivers / pwm / pwm-lpss-pci.c
blob053088b9b66edb4c50c3b47c5e942b6e2e343c00
1 /*
2 * Intel Low Power Subsystem PWM controller PCI driver
4 * Copyright (C) 2014, Intel Corporation
6 * Derived from the original pwm-lpss.c
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/pci.h>
16 #include <linux/pm_runtime.h>
18 #include "pwm-lpss.h"
20 /* BayTrail */
21 static const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
22 .clk_rate = 25000000,
23 .npwm = 1,
24 .base_unit_bits = 16,
27 /* Braswell */
28 static const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
29 .clk_rate = 19200000,
30 .npwm = 1,
31 .base_unit_bits = 16,
34 /* Broxton */
35 static const struct pwm_lpss_boardinfo pwm_lpss_bxt_info = {
36 .clk_rate = 19200000,
37 .npwm = 4,
38 .base_unit_bits = 22,
41 static int pwm_lpss_probe_pci(struct pci_dev *pdev,
42 const struct pci_device_id *id)
44 const struct pwm_lpss_boardinfo *info;
45 struct pwm_lpss_chip *lpwm;
46 int err;
48 err = pcim_enable_device(pdev);
49 if (err < 0)
50 return err;
52 info = (struct pwm_lpss_boardinfo *)id->driver_data;
53 lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
54 if (IS_ERR(lpwm))
55 return PTR_ERR(lpwm);
57 pci_set_drvdata(pdev, lpwm);
59 pm_runtime_put(&pdev->dev);
60 pm_runtime_allow(&pdev->dev);
62 return 0;
65 static void pwm_lpss_remove_pci(struct pci_dev *pdev)
67 struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
69 pm_runtime_forbid(&pdev->dev);
70 pm_runtime_get_sync(&pdev->dev);
72 pwm_lpss_remove(lpwm);
75 #ifdef CONFIG_PM
76 static int pwm_lpss_runtime_suspend_pci(struct device *dev)
79 * The PCI core will handle transition to D3 automatically. We only
80 * need to provide runtime PM hooks for that to happen.
82 return 0;
85 static int pwm_lpss_runtime_resume_pci(struct device *dev)
87 return 0;
89 #endif
91 static const struct dev_pm_ops pwm_lpss_pci_pm = {
92 SET_RUNTIME_PM_OPS(pwm_lpss_runtime_suspend_pci,
93 pwm_lpss_runtime_resume_pci, NULL)
96 static const struct pci_device_id pwm_lpss_pci_ids[] = {
97 { PCI_VDEVICE(INTEL, 0x0ac8), (unsigned long)&pwm_lpss_bxt_info},
98 { PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&pwm_lpss_byt_info},
99 { PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&pwm_lpss_byt_info},
100 { PCI_VDEVICE(INTEL, 0x11a5), (unsigned long)&pwm_lpss_bxt_info},
101 { PCI_VDEVICE(INTEL, 0x1ac8), (unsigned long)&pwm_lpss_bxt_info},
102 { PCI_VDEVICE(INTEL, 0x2288), (unsigned long)&pwm_lpss_bsw_info},
103 { PCI_VDEVICE(INTEL, 0x2289), (unsigned long)&pwm_lpss_bsw_info},
104 { PCI_VDEVICE(INTEL, 0x31c8), (unsigned long)&pwm_lpss_bxt_info},
105 { PCI_VDEVICE(INTEL, 0x5ac8), (unsigned long)&pwm_lpss_bxt_info},
106 { },
108 MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
110 static struct pci_driver pwm_lpss_driver_pci = {
111 .name = "pwm-lpss",
112 .id_table = pwm_lpss_pci_ids,
113 .probe = pwm_lpss_probe_pci,
114 .remove = pwm_lpss_remove_pci,
115 .driver = {
116 .pm = &pwm_lpss_pci_pm,
119 module_pci_driver(pwm_lpss_driver_pci);
121 MODULE_DESCRIPTION("PWM PCI driver for Intel LPSS");
122 MODULE_LICENSE("GPL v2");