mm, debug: replace dump_flags() with the new printk formats
[linux/fpc-iii.git] / drivers / iommu / irq_remapping.c
blob8adaaeae32681d863c568eddbfd9af5e12bdc205
1 #include <linux/seq_file.h>
2 #include <linux/cpumask.h>
3 #include <linux/kernel.h>
4 #include <linux/string.h>
5 #include <linux/errno.h>
6 #include <linux/msi.h>
7 #include <linux/irq.h>
8 #include <linux/pci.h>
9 #include <linux/irqdomain.h>
11 #include <asm/hw_irq.h>
12 #include <asm/irq_remapping.h>
13 #include <asm/processor.h>
14 #include <asm/x86_init.h>
15 #include <asm/apic.h>
16 #include <asm/hpet.h>
18 #include "irq_remapping.h"
20 int irq_remapping_enabled;
21 int irq_remap_broken;
22 int disable_sourceid_checking;
23 int no_x2apic_optout;
25 int disable_irq_post = 0;
27 static int disable_irq_remap;
28 static struct irq_remap_ops *remap_ops;
30 static void irq_remapping_disable_io_apic(void)
33 * With interrupt-remapping, for now we will use virtual wire A
34 * mode, as virtual wire B is little complex (need to configure
35 * both IOAPIC RTE as well as interrupt-remapping table entry).
36 * As this gets called during crash dump, keep this simple for
37 * now.
39 if (cpu_has_apic || apic_from_smp_config())
40 disconnect_bsp_APIC(0);
43 static void __init irq_remapping_modify_x86_ops(void)
45 x86_io_apic_ops.disable = irq_remapping_disable_io_apic;
48 static __init int setup_nointremap(char *str)
50 disable_irq_remap = 1;
51 return 0;
53 early_param("nointremap", setup_nointremap);
55 static __init int setup_irqremap(char *str)
57 if (!str)
58 return -EINVAL;
60 while (*str) {
61 if (!strncmp(str, "on", 2)) {
62 disable_irq_remap = 0;
63 disable_irq_post = 0;
64 } else if (!strncmp(str, "off", 3)) {
65 disable_irq_remap = 1;
66 disable_irq_post = 1;
67 } else if (!strncmp(str, "nosid", 5))
68 disable_sourceid_checking = 1;
69 else if (!strncmp(str, "no_x2apic_optout", 16))
70 no_x2apic_optout = 1;
71 else if (!strncmp(str, "nopost", 6))
72 disable_irq_post = 1;
74 str += strcspn(str, ",");
75 while (*str == ',')
76 str++;
79 return 0;
81 early_param("intremap", setup_irqremap);
83 void set_irq_remapping_broken(void)
85 irq_remap_broken = 1;
88 bool irq_remapping_cap(enum irq_remap_cap cap)
90 if (!remap_ops || disable_irq_post)
91 return false;
93 return (remap_ops->capability & (1 << cap));
95 EXPORT_SYMBOL_GPL(irq_remapping_cap);
97 int __init irq_remapping_prepare(void)
99 if (disable_irq_remap)
100 return -ENOSYS;
102 if (intel_irq_remap_ops.prepare() == 0)
103 remap_ops = &intel_irq_remap_ops;
104 else if (IS_ENABLED(CONFIG_AMD_IOMMU) &&
105 amd_iommu_irq_ops.prepare() == 0)
106 remap_ops = &amd_iommu_irq_ops;
107 else
108 return -ENOSYS;
110 return 0;
113 int __init irq_remapping_enable(void)
115 int ret;
117 if (!remap_ops->enable)
118 return -ENODEV;
120 ret = remap_ops->enable();
122 if (irq_remapping_enabled)
123 irq_remapping_modify_x86_ops();
125 return ret;
128 void irq_remapping_disable(void)
130 if (irq_remapping_enabled && remap_ops->disable)
131 remap_ops->disable();
134 int irq_remapping_reenable(int mode)
136 if (irq_remapping_enabled && remap_ops->reenable)
137 return remap_ops->reenable(mode);
139 return 0;
142 int __init irq_remap_enable_fault_handling(void)
144 if (!irq_remapping_enabled)
145 return 0;
147 if (!remap_ops->enable_faulting)
148 return -ENODEV;
150 return remap_ops->enable_faulting();
153 void panic_if_irq_remap(const char *msg)
155 if (irq_remapping_enabled)
156 panic(msg);
159 void ir_ack_apic_edge(struct irq_data *data)
161 ack_APIC_irq();
165 * irq_remapping_get_ir_irq_domain - Get the irqdomain associated with the IOMMU
166 * device serving request @info
167 * @info: interrupt allocation information, used to identify the IOMMU device
169 * It's used to get parent irqdomain for HPET and IOAPIC irqdomains.
170 * Returns pointer to IRQ domain, or NULL on failure.
172 struct irq_domain *
173 irq_remapping_get_ir_irq_domain(struct irq_alloc_info *info)
175 if (!remap_ops || !remap_ops->get_ir_irq_domain)
176 return NULL;
178 return remap_ops->get_ir_irq_domain(info);
182 * irq_remapping_get_irq_domain - Get the irqdomain serving the request @info
183 * @info: interrupt allocation information, used to identify the IOMMU device
185 * There will be one PCI MSI/MSIX irqdomain associated with each interrupt
186 * remapping device, so this interface is used to retrieve the PCI MSI/MSIX
187 * irqdomain serving request @info.
188 * Returns pointer to IRQ domain, or NULL on failure.
190 struct irq_domain *
191 irq_remapping_get_irq_domain(struct irq_alloc_info *info)
193 if (!remap_ops || !remap_ops->get_irq_domain)
194 return NULL;
196 return remap_ops->get_irq_domain(info);