mm, debug: replace dump_flags() with the new printk formats
[linux/fpc-iii.git] / drivers / leds / leds-pca9532.c
blobe3d3b1aaa9e0914dc565c4c4ec2b9d4d9bc01454
1 /*
2 * pca9532.c - 16-bit Led dimmer
4 * Copyright (C) 2011 Jan Weitzel
5 * Copyright (C) 2008 Riku Voipio
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; version 2 of the License.
11 * Datasheet: http://www.nxp.com/documents/data_sheet/PCA9532.pdf
15 #include <linux/module.h>
16 #include <linux/i2c.h>
17 #include <linux/slab.h>
18 #include <linux/leds.h>
19 #include <linux/input.h>
20 #include <linux/mutex.h>
21 #include <linux/workqueue.h>
22 #include <linux/leds-pca9532.h>
23 #include <linux/gpio.h>
25 /* m = num_leds*/
26 #define PCA9532_REG_INPUT(i) ((i) >> 3)
27 #define PCA9532_REG_OFFSET(m) ((m) >> 4)
28 #define PCA9532_REG_PSC(m, i) (PCA9532_REG_OFFSET(m) + 0x1 + (i) * 2)
29 #define PCA9532_REG_PWM(m, i) (PCA9532_REG_OFFSET(m) + 0x2 + (i) * 2)
30 #define LED_REG(m, led) (PCA9532_REG_OFFSET(m) + 0x5 + (led >> 2))
31 #define LED_NUM(led) (led & 0x3)
33 #define ldev_to_led(c) container_of(c, struct pca9532_led, ldev)
35 struct pca9532_chip_info {
36 u8 num_leds;
39 struct pca9532_data {
40 struct i2c_client *client;
41 struct pca9532_led leds[16];
42 struct mutex update_lock;
43 struct input_dev *idev;
44 struct work_struct work;
45 #ifdef CONFIG_LEDS_PCA9532_GPIO
46 struct gpio_chip gpio;
47 #endif
48 const struct pca9532_chip_info *chip_info;
49 u8 pwm[2];
50 u8 psc[2];
53 static int pca9532_probe(struct i2c_client *client,
54 const struct i2c_device_id *id);
55 static int pca9532_remove(struct i2c_client *client);
57 enum {
58 pca9530,
59 pca9531,
60 pca9532,
61 pca9533,
64 static const struct i2c_device_id pca9532_id[] = {
65 { "pca9530", pca9530 },
66 { "pca9531", pca9531 },
67 { "pca9532", pca9532 },
68 { "pca9533", pca9533 },
69 { }
72 MODULE_DEVICE_TABLE(i2c, pca9532_id);
74 static const struct pca9532_chip_info pca9532_chip_info_tbl[] = {
75 [pca9530] = {
76 .num_leds = 2,
78 [pca9531] = {
79 .num_leds = 8,
81 [pca9532] = {
82 .num_leds = 16,
84 [pca9533] = {
85 .num_leds = 4,
89 static struct i2c_driver pca9532_driver = {
90 .driver = {
91 .name = "leds-pca953x",
93 .probe = pca9532_probe,
94 .remove = pca9532_remove,
95 .id_table = pca9532_id,
98 /* We have two pwm/blinkers, but 16 possible leds to drive. Additionally,
99 * the clever Thecus people are using one pwm to drive the beeper. So,
100 * as a compromise we average one pwm to the values requested by all
101 * leds that are not ON/OFF.
102 * */
103 static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
104 enum led_brightness value)
106 int a = 0, b = 0, i = 0;
107 struct pca9532_data *data = i2c_get_clientdata(client);
108 for (i = 0; i < data->chip_info->num_leds; i++) {
109 if (data->leds[i].type == PCA9532_TYPE_LED &&
110 data->leds[i].state == PCA9532_PWM0+pwm) {
111 a++;
112 b += data->leds[i].ldev.brightness;
115 if (a == 0) {
116 dev_err(&client->dev,
117 "fear of division by zero %d/%d, wanted %d\n",
118 b, a, value);
119 return -EINVAL;
121 b = b/a;
122 if (b > 0xFF)
123 return -EINVAL;
124 data->pwm[pwm] = b;
125 data->psc[pwm] = blink;
126 return 0;
129 static int pca9532_setpwm(struct i2c_client *client, int pwm)
131 struct pca9532_data *data = i2c_get_clientdata(client);
132 u8 maxleds = data->chip_info->num_leds;
134 mutex_lock(&data->update_lock);
135 i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, pwm),
136 data->pwm[pwm]);
137 i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, pwm),
138 data->psc[pwm]);
139 mutex_unlock(&data->update_lock);
140 return 0;
143 /* Set LED routing */
144 static void pca9532_setled(struct pca9532_led *led)
146 struct i2c_client *client = led->client;
147 struct pca9532_data *data = i2c_get_clientdata(client);
148 u8 maxleds = data->chip_info->num_leds;
149 char reg;
151 mutex_lock(&data->update_lock);
152 reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id));
153 /* zero led bits */
154 reg = reg & ~(0x3<<LED_NUM(led->id)*2);
155 /* set the new value */
156 reg = reg | (led->state << LED_NUM(led->id)*2);
157 i2c_smbus_write_byte_data(client, LED_REG(maxleds, led->id), reg);
158 mutex_unlock(&data->update_lock);
161 static int pca9532_set_brightness(struct led_classdev *led_cdev,
162 enum led_brightness value)
164 int err = 0;
165 struct pca9532_led *led = ldev_to_led(led_cdev);
167 if (value == LED_OFF)
168 led->state = PCA9532_OFF;
169 else if (value == LED_FULL)
170 led->state = PCA9532_ON;
171 else {
172 led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
173 err = pca9532_calcpwm(led->client, 0, 0, value);
174 if (err)
175 return err;
177 if (led->state == PCA9532_PWM0)
178 pca9532_setpwm(led->client, 0);
179 pca9532_setled(led);
180 return err;
183 static int pca9532_set_blink(struct led_classdev *led_cdev,
184 unsigned long *delay_on, unsigned long *delay_off)
186 struct pca9532_led *led = ldev_to_led(led_cdev);
187 struct i2c_client *client = led->client;
188 int psc;
189 int err = 0;
191 if (*delay_on == 0 && *delay_off == 0) {
192 /* led subsystem ask us for a blink rate */
193 *delay_on = 1000;
194 *delay_off = 1000;
196 if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
197 return -EINVAL;
199 /* Thecus specific: only use PSC/PWM 0 */
200 psc = (*delay_on * 152-1)/1000;
201 err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
202 if (err)
203 return err;
204 if (led->state == PCA9532_PWM0)
205 pca9532_setpwm(led->client, 0);
206 pca9532_setled(led);
208 return 0;
211 static int pca9532_event(struct input_dev *dev, unsigned int type,
212 unsigned int code, int value)
214 struct pca9532_data *data = input_get_drvdata(dev);
216 if (!(type == EV_SND && (code == SND_BELL || code == SND_TONE)))
217 return -1;
219 /* XXX: allow different kind of beeps with psc/pwm modifications */
220 if (value > 1 && value < 32767)
221 data->pwm[1] = 127;
222 else
223 data->pwm[1] = 0;
225 schedule_work(&data->work);
227 return 0;
230 static void pca9532_input_work(struct work_struct *work)
232 struct pca9532_data *data =
233 container_of(work, struct pca9532_data, work);
234 u8 maxleds = data->chip_info->num_leds;
236 mutex_lock(&data->update_lock);
237 i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(maxleds, 1),
238 data->pwm[1]);
239 mutex_unlock(&data->update_lock);
242 #ifdef CONFIG_LEDS_PCA9532_GPIO
243 static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
245 struct pca9532_data *data = gpiochip_get_data(gc);
246 struct pca9532_led *led = &data->leds[offset];
248 if (led->type == PCA9532_TYPE_GPIO)
249 return 0;
251 return -EBUSY;
254 static void pca9532_gpio_set_value(struct gpio_chip *gc, unsigned offset, int val)
256 struct pca9532_data *data = gpiochip_get_data(gc);
257 struct pca9532_led *led = &data->leds[offset];
259 if (val)
260 led->state = PCA9532_ON;
261 else
262 led->state = PCA9532_OFF;
264 pca9532_setled(led);
267 static int pca9532_gpio_get_value(struct gpio_chip *gc, unsigned offset)
269 struct pca9532_data *data = gpiochip_get_data(gc);
270 unsigned char reg;
272 reg = i2c_smbus_read_byte_data(data->client, PCA9532_REG_INPUT(offset));
274 return !!(reg & (1 << (offset % 8)));
277 static int pca9532_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
279 /* To use as input ensure pin is not driven */
280 pca9532_gpio_set_value(gc, offset, 0);
282 return 0;
285 static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int val)
287 pca9532_gpio_set_value(gc, offset, val);
289 return 0;
291 #endif /* CONFIG_LEDS_PCA9532_GPIO */
293 static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
295 int i = n_devs;
297 if (!data)
298 return -EINVAL;
300 while (--i >= 0) {
301 switch (data->leds[i].type) {
302 case PCA9532_TYPE_NONE:
303 case PCA9532_TYPE_GPIO:
304 break;
305 case PCA9532_TYPE_LED:
306 led_classdev_unregister(&data->leds[i].ldev);
307 break;
308 case PCA9532_TYPE_N2100_BEEP:
309 if (data->idev != NULL) {
310 cancel_work_sync(&data->work);
311 data->idev = NULL;
313 break;
317 #ifdef CONFIG_LEDS_PCA9532_GPIO
318 if (data->gpio.parent)
319 gpiochip_remove(&data->gpio);
320 #endif
322 return 0;
325 static int pca9532_configure(struct i2c_client *client,
326 struct pca9532_data *data, struct pca9532_platform_data *pdata)
328 int i, err = 0;
329 int gpios = 0;
330 u8 maxleds = data->chip_info->num_leds;
332 for (i = 0; i < 2; i++) {
333 data->pwm[i] = pdata->pwm[i];
334 data->psc[i] = pdata->psc[i];
335 i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, i),
336 data->pwm[i]);
337 i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, i),
338 data->psc[i]);
341 for (i = 0; i < data->chip_info->num_leds; i++) {
342 struct pca9532_led *led = &data->leds[i];
343 struct pca9532_led *pled = &pdata->leds[i];
344 led->client = client;
345 led->id = i;
346 led->type = pled->type;
347 switch (led->type) {
348 case PCA9532_TYPE_NONE:
349 break;
350 case PCA9532_TYPE_GPIO:
351 gpios++;
352 break;
353 case PCA9532_TYPE_LED:
354 led->state = pled->state;
355 led->name = pled->name;
356 led->ldev.name = led->name;
357 led->ldev.brightness = LED_OFF;
358 led->ldev.brightness_set_blocking =
359 pca9532_set_brightness;
360 led->ldev.blink_set = pca9532_set_blink;
361 err = led_classdev_register(&client->dev, &led->ldev);
362 if (err < 0) {
363 dev_err(&client->dev,
364 "couldn't register LED %s\n",
365 led->name);
366 goto exit;
368 pca9532_setled(led);
369 break;
370 case PCA9532_TYPE_N2100_BEEP:
371 BUG_ON(data->idev);
372 led->state = PCA9532_PWM1;
373 pca9532_setled(led);
374 data->idev = devm_input_allocate_device(&client->dev);
375 if (data->idev == NULL) {
376 err = -ENOMEM;
377 goto exit;
379 data->idev->name = pled->name;
380 data->idev->phys = "i2c/pca9532";
381 data->idev->id.bustype = BUS_HOST;
382 data->idev->id.vendor = 0x001f;
383 data->idev->id.product = 0x0001;
384 data->idev->id.version = 0x0100;
385 data->idev->evbit[0] = BIT_MASK(EV_SND);
386 data->idev->sndbit[0] = BIT_MASK(SND_BELL) |
387 BIT_MASK(SND_TONE);
388 data->idev->event = pca9532_event;
389 input_set_drvdata(data->idev, data);
390 INIT_WORK(&data->work, pca9532_input_work);
391 err = input_register_device(data->idev);
392 if (err) {
393 cancel_work_sync(&data->work);
394 data->idev = NULL;
395 goto exit;
397 break;
401 #ifdef CONFIG_LEDS_PCA9532_GPIO
402 if (gpios) {
403 data->gpio.label = "gpio-pca9532";
404 data->gpio.direction_input = pca9532_gpio_direction_input;
405 data->gpio.direction_output = pca9532_gpio_direction_output;
406 data->gpio.set = pca9532_gpio_set_value;
407 data->gpio.get = pca9532_gpio_get_value;
408 data->gpio.request = pca9532_gpio_request_pin;
409 data->gpio.can_sleep = 1;
410 data->gpio.base = pdata->gpio_base;
411 data->gpio.ngpio = data->chip_info->num_leds;
412 data->gpio.parent = &client->dev;
413 data->gpio.owner = THIS_MODULE;
415 err = gpiochip_add_data(&data->gpio, data);
416 if (err) {
417 /* Use data->gpio.dev as a flag for freeing gpiochip */
418 data->gpio.parent = NULL;
419 dev_warn(&client->dev, "could not add gpiochip\n");
420 } else {
421 dev_info(&client->dev, "gpios %i...%i\n",
422 data->gpio.base, data->gpio.base +
423 data->gpio.ngpio - 1);
426 #endif
428 return 0;
430 exit:
431 pca9532_destroy_devices(data, i);
432 return err;
435 static int pca9532_probe(struct i2c_client *client,
436 const struct i2c_device_id *id)
438 struct pca9532_data *data = i2c_get_clientdata(client);
439 struct pca9532_platform_data *pca9532_pdata =
440 dev_get_platdata(&client->dev);
442 if (!pca9532_pdata)
443 return -EIO;
445 if (!i2c_check_functionality(client->adapter,
446 I2C_FUNC_SMBUS_BYTE_DATA))
447 return -EIO;
449 data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
450 if (!data)
451 return -ENOMEM;
453 data->chip_info = &pca9532_chip_info_tbl[id->driver_data];
455 dev_info(&client->dev, "setting platform data\n");
456 i2c_set_clientdata(client, data);
457 data->client = client;
458 mutex_init(&data->update_lock);
460 return pca9532_configure(client, data, pca9532_pdata);
463 static int pca9532_remove(struct i2c_client *client)
465 struct pca9532_data *data = i2c_get_clientdata(client);
466 int err;
468 err = pca9532_destroy_devices(data, data->chip_info->num_leds);
469 if (err)
470 return err;
472 return 0;
475 module_i2c_driver(pca9532_driver);
477 MODULE_AUTHOR("Riku Voipio");
478 MODULE_LICENSE("GPL");
479 MODULE_DESCRIPTION("PCA 9532 LED dimmer");