2 * Driver for the NXP ISP1760 chip
4 * However, the code might contain some bugs. What doesn't work for sure is:
7 e The interrupt line is configured as active low, level.
9 * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/list.h>
16 #include <linux/usb.h>
17 #include <linux/debugfs.h>
18 #include <linux/uaccess.h>
20 #include <asm/unaligned.h>
22 #include "../core/hcd.h"
23 #include "isp1760-hcd.h"
25 static struct kmem_cache
*qtd_cachep
;
26 static struct kmem_cache
*qh_cachep
;
31 struct inter_packet_info atl_ints
[32];
32 struct inter_packet_info int_ints
[32];
33 struct memory_chunk memory_pool
[BLOCKS
];
35 /* periodic schedule support */
36 #define DEFAULT_I_TDPS 1024
37 unsigned periodic_size
;
39 unsigned long reset_done
;
40 unsigned long next_statechange
;
41 unsigned int devflags
;
44 static inline struct isp1760_hcd
*hcd_to_priv(struct usb_hcd
*hcd
)
46 return (struct isp1760_hcd
*) (hcd
->hcd_priv
);
48 static inline struct usb_hcd
*priv_to_hcd(struct isp1760_hcd
*priv
)
50 return container_of((void *) priv
, struct usb_hcd
, hcd_priv
);
53 /* Section 2.2 Host Controller Capability Registers */
54 #define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
55 #define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
56 #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
57 #define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
58 #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
59 #define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
60 #define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
62 /* Section 2.3 Host Controller Operational Registers */
63 #define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
64 #define CMD_RESET (1<<1) /* reset HC not bus */
65 #define CMD_RUN (1<<0) /* start/stop HC */
66 #define STS_PCD (1<<2) /* port change detect */
67 #define FLAG_CF (1<<0) /* true: we'll support "high speed" */
69 #define PORT_OWNER (1<<13) /* true: companion hc owns this port */
70 #define PORT_POWER (1<<12) /* true: has power (see PPC) */
71 #define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10)) /* USB 1.1 device */
72 #define PORT_RESET (1<<8) /* reset port */
73 #define PORT_SUSPEND (1<<7) /* suspend port */
74 #define PORT_RESUME (1<<6) /* resume it */
75 #define PORT_PE (1<<2) /* port enable */
76 #define PORT_CSC (1<<1) /* connect status change */
77 #define PORT_CONNECT (1<<0) /* device connected */
78 #define PORT_RWC_BITS (PORT_CSC)
81 struct isp1760_qtd
*hw_next
;
86 /* the rest is HCD-private */
87 struct list_head qtd_list
;
93 #define URB_COMPLETE_NOTIFY (1 << 0)
94 #define URB_ENQUEUED (1 << 1)
95 #define URB_TYPE_ATL (1 << 2)
96 #define URB_TYPE_INT (1 << 3)
100 /* first part defined by EHCI spec */
101 struct list_head qtd_list
;
102 struct isp1760_hcd
*priv
;
104 /* periodic schedule info */
105 unsigned short period
; /* polling interval */
106 struct usb_device
*dev
;
112 #define ehci_port_speed(priv, portsc) (1 << USB_PORT_FEAT_HIGHSPEED)
114 static unsigned int isp1760_readl(__u32 __iomem
*regs
)
119 static void isp1760_writel(const unsigned int val
, __u32 __iomem
*regs
)
125 * The next two copy via MMIO data to/from the device. memcpy_{to|from}io()
126 * doesn't quite work because some people have to enforce 32-bit access
128 static void priv_read_copy(struct isp1760_hcd
*priv
, u32
*src
,
129 __u32 __iomem
*dst
, u32 len
)
135 printk(KERN_ERR
"ERROR: buffer: %p len: %d\n", src
, len
);
140 *src
= __raw_readl(dst
);
149 /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
152 val
= isp1760_readl(dst
);
164 static void priv_write_copy(const struct isp1760_hcd
*priv
, const u32
*src
,
165 __u32 __iomem
*dst
, u32 len
)
168 __raw_writel(*src
, dst
);
176 /* in case we have 3, 2 or 1 by left. The buffer is allocated and the
177 * extra bytes should not be read by the HW
180 __raw_writel(*src
, dst
);
183 /* memory management of the 60kb on the chip from 0x1000 to 0xffff */
184 static void init_memory(struct isp1760_hcd
*priv
)
190 for (i
= 0; i
< BLOCK_1_NUM
; i
++) {
191 priv
->memory_pool
[i
].start
= payload
;
192 priv
->memory_pool
[i
].size
= BLOCK_1_SIZE
;
193 priv
->memory_pool
[i
].free
= 1;
194 payload
+= priv
->memory_pool
[i
].size
;
198 for (i
= BLOCK_1_NUM
; i
< BLOCK_1_NUM
+ BLOCK_2_NUM
; i
++) {
199 priv
->memory_pool
[i
].start
= payload
;
200 priv
->memory_pool
[i
].size
= BLOCK_2_SIZE
;
201 priv
->memory_pool
[i
].free
= 1;
202 payload
+= priv
->memory_pool
[i
].size
;
206 for (i
= BLOCK_1_NUM
+ BLOCK_2_NUM
; i
< BLOCKS
; i
++) {
207 priv
->memory_pool
[i
].start
= payload
;
208 priv
->memory_pool
[i
].size
= BLOCK_3_SIZE
;
209 priv
->memory_pool
[i
].free
= 1;
210 payload
+= priv
->memory_pool
[i
].size
;
213 BUG_ON(payload
- priv
->memory_pool
[i
- 1].size
> PAYLOAD_SIZE
);
216 static u32
alloc_mem(struct isp1760_hcd
*priv
, u32 size
)
221 return ISP1760_NULL_POINTER
;
223 for (i
= 0; i
< BLOCKS
; i
++) {
224 if (priv
->memory_pool
[i
].size
>= size
&&
225 priv
->memory_pool
[i
].free
) {
227 priv
->memory_pool
[i
].free
= 0;
228 return priv
->memory_pool
[i
].start
;
232 printk(KERN_ERR
"ISP1760 MEM: can not allocate %d bytes of memory\n",
234 printk(KERN_ERR
"Current memory map:\n");
235 for (i
= 0; i
< BLOCKS
; i
++) {
236 printk(KERN_ERR
"Pool %2d size %4d status: %d\n",
237 i
, priv
->memory_pool
[i
].size
,
238 priv
->memory_pool
[i
].free
);
240 /* XXX maybe -ENOMEM could be possible */
245 static void free_mem(struct isp1760_hcd
*priv
, u32 mem
)
249 if (mem
== ISP1760_NULL_POINTER
)
252 for (i
= 0; i
< BLOCKS
; i
++) {
253 if (priv
->memory_pool
[i
].start
== mem
) {
255 BUG_ON(priv
->memory_pool
[i
].free
);
257 priv
->memory_pool
[i
].free
= 1;
262 printk(KERN_ERR
"Trying to free not-here-allocated memory :%08x\n",
267 static void isp1760_init_regs(struct usb_hcd
*hcd
)
269 isp1760_writel(0, hcd
->regs
+ HC_BUFFER_STATUS_REG
);
270 isp1760_writel(NO_TRANSFER_ACTIVE
, hcd
->regs
+
271 HC_ATL_PTD_SKIPMAP_REG
);
272 isp1760_writel(NO_TRANSFER_ACTIVE
, hcd
->regs
+
273 HC_INT_PTD_SKIPMAP_REG
);
274 isp1760_writel(NO_TRANSFER_ACTIVE
, hcd
->regs
+
275 HC_ISO_PTD_SKIPMAP_REG
);
277 isp1760_writel(~NO_TRANSFER_ACTIVE
, hcd
->regs
+
278 HC_ATL_PTD_DONEMAP_REG
);
279 isp1760_writel(~NO_TRANSFER_ACTIVE
, hcd
->regs
+
280 HC_INT_PTD_DONEMAP_REG
);
281 isp1760_writel(~NO_TRANSFER_ACTIVE
, hcd
->regs
+
282 HC_ISO_PTD_DONEMAP_REG
);
285 static int handshake(struct isp1760_hcd
*priv
, void __iomem
*ptr
,
286 u32 mask
, u32 done
, int usec
)
291 result
= isp1760_readl(ptr
);
303 /* reset a non-running (STS_HALT == 1) controller */
304 static int ehci_reset(struct isp1760_hcd
*priv
)
307 struct usb_hcd
*hcd
= priv_to_hcd(priv
);
308 u32 command
= isp1760_readl(hcd
->regs
+ HC_USBCMD
);
310 command
|= CMD_RESET
;
311 isp1760_writel(command
, hcd
->regs
+ HC_USBCMD
);
312 hcd
->state
= HC_STATE_HALT
;
313 priv
->next_statechange
= jiffies
;
314 retval
= handshake(priv
, hcd
->regs
+ HC_USBCMD
,
315 CMD_RESET
, 0, 250 * 1000);
319 static void qh_destroy(struct isp1760_qh
*qh
)
321 BUG_ON(!list_empty(&qh
->qtd_list
));
322 kmem_cache_free(qh_cachep
, qh
);
325 static struct isp1760_qh
*isp1760_qh_alloc(struct isp1760_hcd
*priv
,
328 struct isp1760_qh
*qh
;
330 qh
= kmem_cache_zalloc(qh_cachep
, flags
);
334 INIT_LIST_HEAD(&qh
->qtd_list
);
339 /* magic numbers that can affect system performance */
340 #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
341 #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
342 #define EHCI_TUNE_RL_TT 0
343 #define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
344 #define EHCI_TUNE_MULT_TT 1
345 #define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
347 /* one-time init, only for memory state */
348 static int priv_init(struct usb_hcd
*hcd
)
350 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
353 spin_lock_init(&priv
->lock
);
356 * hw default: 1K periodic list heads, one per frame.
357 * periodic_size can shrink by USBCMD update if hcc_params allows.
359 priv
->periodic_size
= DEFAULT_I_TDPS
;
361 /* controllers may cache some of the periodic schedule ... */
362 hcc_params
= isp1760_readl(hcd
->regs
+ HC_HCCPARAMS
);
363 /* full frame cache */
364 if (HCC_ISOC_CACHE(hcc_params
))
366 else /* N microframes cached */
367 priv
->i_thresh
= 2 + HCC_ISOC_THRES(hcc_params
);
372 static int isp1760_hc_setup(struct usb_hcd
*hcd
)
374 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
378 /* Setup HW Mode Control: This assumes a level active-low interrupt */
379 hwmode
= HW_DATA_BUS_32BIT
;
381 if (priv
->devflags
& ISP1760_FLAG_BUS_WIDTH_16
)
382 hwmode
&= ~HW_DATA_BUS_32BIT
;
383 if (priv
->devflags
& ISP1760_FLAG_ANALOG_OC
)
384 hwmode
|= HW_ANA_DIGI_OC
;
385 if (priv
->devflags
& ISP1760_FLAG_DACK_POL_HIGH
)
386 hwmode
|= HW_DACK_POL_HIGH
;
387 if (priv
->devflags
& ISP1760_FLAG_DREQ_POL_HIGH
)
388 hwmode
|= HW_DREQ_POL_HIGH
;
391 * We have to set this first in case we're in 16-bit mode.
392 * Write it twice to ensure correct upper bits if switching
395 isp1760_writel(hwmode
, hcd
->regs
+ HC_HW_MODE_CTRL
);
396 isp1760_writel(hwmode
, hcd
->regs
+ HC_HW_MODE_CTRL
);
398 isp1760_writel(0xdeadbabe, hcd
->regs
+ HC_SCRATCH_REG
);
399 /* Change bus pattern */
400 scratch
= isp1760_readl(hcd
->regs
+ HC_CHIP_ID_REG
);
401 scratch
= isp1760_readl(hcd
->regs
+ HC_SCRATCH_REG
);
402 if (scratch
!= 0xdeadbabe) {
403 printk(KERN_ERR
"ISP1760: Scratch test failed.\n");
408 isp1760_init_regs(hcd
);
411 isp1760_writel(SW_RESET_RESET_ALL
, hcd
->regs
+ HC_RESET_REG
);
414 isp1760_writel(SW_RESET_RESET_HC
, hcd
->regs
+ HC_RESET_REG
);
417 result
= ehci_reset(priv
);
423 isp1760_info(priv
, "bus width: %d, oc: %s\n",
424 (priv
->devflags
& ISP1760_FLAG_BUS_WIDTH_16
) ?
425 16 : 32, (priv
->devflags
& ISP1760_FLAG_ANALOG_OC
) ?
426 "analog" : "digital");
429 isp1760_writel(hwmode
| ALL_ATX_RESET
, hcd
->regs
+ HC_HW_MODE_CTRL
);
431 isp1760_writel(hwmode
, hcd
->regs
+ HC_HW_MODE_CTRL
);
433 isp1760_writel(INTERRUPT_ENABLE_MASK
, hcd
->regs
+ HC_INTERRUPT_REG
);
434 isp1760_writel(INTERRUPT_ENABLE_MASK
, hcd
->regs
+ HC_INTERRUPT_ENABLE
);
437 * PORT 1 Control register of the ISP1760 is the OTG control
438 * register on ISP1761. Since there is no OTG or device controller
439 * support in this driver, we use port 1 as a "normal" USB host port on
442 isp1760_writel(PORT1_POWER
| PORT1_INIT2
,
443 hcd
->regs
+ HC_PORT1_CTRL
);
446 priv
->hcs_params
= isp1760_readl(hcd
->regs
+ HC_HCSPARAMS
);
448 return priv_init(hcd
);
451 static void isp1760_init_maps(struct usb_hcd
*hcd
)
453 /*set last maps, for iso its only 1, else 32 tds bitmap*/
454 isp1760_writel(0x80000000, hcd
->regs
+ HC_ATL_PTD_LASTPTD_REG
);
455 isp1760_writel(0x80000000, hcd
->regs
+ HC_INT_PTD_LASTPTD_REG
);
456 isp1760_writel(0x00000001, hcd
->regs
+ HC_ISO_PTD_LASTPTD_REG
);
459 static void isp1760_enable_interrupts(struct usb_hcd
*hcd
)
461 isp1760_writel(0, hcd
->regs
+ HC_ATL_IRQ_MASK_AND_REG
);
462 isp1760_writel(0, hcd
->regs
+ HC_ATL_IRQ_MASK_OR_REG
);
463 isp1760_writel(0, hcd
->regs
+ HC_INT_IRQ_MASK_AND_REG
);
464 isp1760_writel(0, hcd
->regs
+ HC_INT_IRQ_MASK_OR_REG
);
465 isp1760_writel(0, hcd
->regs
+ HC_ISO_IRQ_MASK_AND_REG
);
466 isp1760_writel(0xffffffff, hcd
->regs
+ HC_ISO_IRQ_MASK_OR_REG
);
470 static int isp1760_run(struct usb_hcd
*hcd
)
472 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
478 hcd
->uses_new_polling
= 1;
481 hcd
->state
= HC_STATE_RUNNING
;
482 isp1760_enable_interrupts(hcd
);
483 temp
= isp1760_readl(hcd
->regs
+ HC_HW_MODE_CTRL
);
484 isp1760_writel(temp
| HW_GLOBAL_INTR_EN
, hcd
->regs
+ HC_HW_MODE_CTRL
);
486 command
= isp1760_readl(hcd
->regs
+ HC_USBCMD
);
487 command
&= ~(CMD_LRESET
|CMD_RESET
);
489 isp1760_writel(command
, hcd
->regs
+ HC_USBCMD
);
491 retval
= handshake(priv
, hcd
->regs
+ HC_USBCMD
, CMD_RUN
, CMD_RUN
,
498 * Spec says to write FLAG_CF as last config action, priv code grabs
499 * the semaphore while doing so.
501 down_write(&ehci_cf_port_reset_rwsem
);
502 isp1760_writel(FLAG_CF
, hcd
->regs
+ HC_CONFIGFLAG
);
504 retval
= handshake(priv
, hcd
->regs
+ HC_CONFIGFLAG
, FLAG_CF
, FLAG_CF
,
506 up_write(&ehci_cf_port_reset_rwsem
);
510 chipid
= isp1760_readl(hcd
->regs
+ HC_CHIP_ID_REG
);
511 isp1760_info(priv
, "USB ISP %04x HW rev. %d started\n", chipid
& 0xffff,
514 /* PTD Register Init Part 2, Step 28 */
516 isp1760_init_maps(hcd
);
518 /* GRR this is run-once init(), being done every time the HC starts.
519 * So long as they're part of class devices, we can't do it init()
520 * since the class device isn't created that early.
525 static u32
base_to_chip(u32 base
)
527 return ((base
- 0x400) >> 3);
530 static void transform_into_atl(struct isp1760_hcd
*priv
, struct isp1760_qh
*qh
,
531 struct isp1760_qtd
*qtd
, struct urb
*urb
,
532 u32 payload
, struct ptd
*ptd
)
542 u32 nak
= NAK_COUNTER
;
544 /* according to 3.6.2, max packet len can not be > 0x400 */
545 maxpacket
= usb_maxpacket(urb
->dev
, urb
->pipe
, usb_pipeout(urb
->pipe
));
546 multi
= 1 + ((maxpacket
>> 11) & 0x3);
551 dw0
|= PTD_LENGTH(qtd
->length
);
552 dw0
|= PTD_MAXPACKET(maxpacket
);
553 dw0
|= PTD_ENDPOINT(usb_pipeendpoint(urb
->pipe
));
554 dw1
= usb_pipeendpoint(urb
->pipe
) >> 1;
557 dw1
|= PTD_DEVICE_ADDR(usb_pipedevice(urb
->pipe
));
559 pid_code
= qtd
->packet_type
;
560 dw1
|= PTD_PID_TOKEN(pid_code
);
562 if (usb_pipebulk(urb
->pipe
))
563 dw1
|= PTD_TRANS_BULK
;
564 else if (usb_pipeint(urb
->pipe
))
565 dw1
|= PTD_TRANS_INT
;
567 if (urb
->dev
->speed
!= USB_SPEED_HIGH
) {
568 /* split transaction */
570 dw1
|= PTD_TRANS_SPLIT
;
571 if (urb
->dev
->speed
== USB_SPEED_LOW
)
572 dw1
|= PTD_SE_USB_LOSPEED
;
574 dw1
|= PTD_PORT_NUM(urb
->dev
->ttport
);
575 dw1
|= PTD_HUB_NUM(urb
->dev
->tt
->hub
->devnum
);
577 /* SE bit for Split INT transfers */
578 if (usb_pipeint(urb
->pipe
) &&
579 (urb
->dev
->speed
== USB_SPEED_LOW
))
586 dw0
|= PTD_MULTI(multi
);
587 if (usb_pipecontrol(urb
->pipe
) || usb_pipebulk(urb
->pipe
))
594 dw2
|= PTD_DATA_START_ADDR(base_to_chip(payload
));
595 dw2
|= PTD_RL_CNT(rl
);
596 dw3
|= PTD_NAC_CNT(nak
);
599 if (usb_pipecontrol(urb
->pipe
))
600 dw3
|= PTD_DATA_TOGGLE(qtd
->toggle
);
607 dw3
|= PTD_CERR(ERR_COUNTER
);
609 memset(ptd
, 0, sizeof(*ptd
));
611 ptd
->dw0
= cpu_to_le32(dw0
);
612 ptd
->dw1
= cpu_to_le32(dw1
);
613 ptd
->dw2
= cpu_to_le32(dw2
);
614 ptd
->dw3
= cpu_to_le32(dw3
);
617 static void transform_add_int(struct isp1760_hcd
*priv
, struct isp1760_qh
*qh
,
618 struct isp1760_qtd
*qtd
, struct urb
*urb
,
619 u32 payload
, struct ptd
*ptd
)
628 maxpacket
= usb_maxpacket(urb
->dev
, urb
->pipe
, usb_pipeout(urb
->pipe
));
629 multi
= 1 + ((maxpacket
>> 11) & 0x3);
631 /* length of the data per uframe */
632 maxpacket
= multi
* maxpacket
;
634 numberofusofs
= urb
->transfer_buffer_length
/ maxpacket
;
635 if (urb
->transfer_buffer_length
% maxpacket
)
640 for (i
= 0; i
< numberofusofs
; i
++) {
645 if (urb
->dev
->speed
!= USB_SPEED_HIGH
) {
647 ptd
->dw5
= cpu_to_le32(0x1c);
649 if (qh
->period
>= 32)
650 period
= qh
->period
/ 2;
657 period
= qh
->period
/8;
664 if (qh
->period
>= 8) {
665 /* millisecond period */
666 period
= (period
<< 3);
668 /* usof based tranmsfers */
669 /* minimum 4 usofs */
674 ptd
->dw2
|= cpu_to_le32(period
);
675 ptd
->dw4
= cpu_to_le32(usof
);
678 static void transform_into_int(struct isp1760_hcd
*priv
, struct isp1760_qh
*qh
,
679 struct isp1760_qtd
*qtd
, struct urb
*urb
,
680 u32 payload
, struct ptd
*ptd
)
682 transform_into_atl(priv
, qh
, qtd
, urb
, payload
, ptd
);
683 transform_add_int(priv
, qh
, qtd
, urb
, payload
, ptd
);
686 static int qtd_fill(struct isp1760_qtd
*qtd
, void *databuffer
, size_t len
,
691 qtd
->data_buffer
= databuffer
;
692 qtd
->packet_type
= GET_QTD_TOKEN_TYPE(token
);
693 qtd
->toggle
= GET_DATA_TOGGLE(token
);
695 if (len
> HC_ATL_PL_SIZE
)
696 count
= HC_ATL_PL_SIZE
;
704 static int check_error(struct ptd
*ptd
)
709 dw3
= le32_to_cpu(ptd
->dw3
);
710 if (dw3
& DW3_HALT_BIT
)
713 if (dw3
& DW3_ERROR_BIT
) {
714 printk(KERN_ERR
"error bit is set in DW3\n");
718 if (dw3
& DW3_QTD_ACTIVE
) {
719 printk(KERN_ERR
"transfer active bit is set DW3\n");
720 printk(KERN_ERR
"nak counter: %d, rl: %d\n", (dw3
>> 19) & 0xf,
721 (le32_to_cpu(ptd
->dw2
) >> 25) & 0xf);
727 static void check_int_err_status(u32 dw4
)
733 for (i
= 0; i
< 8; i
++) {
736 printk(KERN_ERR
"ERROR: under run , %d\n", i
);
740 printk(KERN_ERR
"ERROR: transaction error, %d\n", i
);
744 printk(KERN_ERR
"ERROR: babble error, %d\n", i
);
751 static void enqueue_one_qtd(struct isp1760_qtd
*qtd
, struct isp1760_hcd
*priv
,
755 struct usb_hcd
*hcd
= priv_to_hcd(priv
);
757 token
= qtd
->packet_type
;
759 if (qtd
->length
&& (qtd
->length
<= HC_ATL_PL_SIZE
)) {
765 priv_write_copy(priv
, qtd
->data_buffer
,
772 static void enqueue_one_atl_qtd(u32 atl_regs
, u32 payload
,
773 struct isp1760_hcd
*priv
, struct isp1760_qh
*qh
,
774 struct urb
*urb
, u32 slot
, struct isp1760_qtd
*qtd
)
777 struct usb_hcd
*hcd
= priv_to_hcd(priv
);
779 transform_into_atl(priv
, qh
, qtd
, urb
, payload
, &ptd
);
780 priv_write_copy(priv
, (u32
*)&ptd
, hcd
->regs
+ atl_regs
, sizeof(ptd
));
781 enqueue_one_qtd(qtd
, priv
, payload
);
783 priv
->atl_ints
[slot
].urb
= urb
;
784 priv
->atl_ints
[slot
].qh
= qh
;
785 priv
->atl_ints
[slot
].qtd
= qtd
;
786 priv
->atl_ints
[slot
].data_buffer
= qtd
->data_buffer
;
787 priv
->atl_ints
[slot
].payload
= payload
;
788 qtd
->status
|= URB_ENQUEUED
| URB_TYPE_ATL
;
789 qtd
->status
|= slot
<< 16;
792 static void enqueue_one_int_qtd(u32 int_regs
, u32 payload
,
793 struct isp1760_hcd
*priv
, struct isp1760_qh
*qh
,
794 struct urb
*urb
, u32 slot
, struct isp1760_qtd
*qtd
)
797 struct usb_hcd
*hcd
= priv_to_hcd(priv
);
799 transform_into_int(priv
, qh
, qtd
, urb
, payload
, &ptd
);
800 priv_write_copy(priv
, (u32
*)&ptd
, hcd
->regs
+ int_regs
, sizeof(ptd
));
801 enqueue_one_qtd(qtd
, priv
, payload
);
803 priv
->int_ints
[slot
].urb
= urb
;
804 priv
->int_ints
[slot
].qh
= qh
;
805 priv
->int_ints
[slot
].qtd
= qtd
;
806 priv
->int_ints
[slot
].data_buffer
= qtd
->data_buffer
;
807 priv
->int_ints
[slot
].payload
= payload
;
808 qtd
->status
|= URB_ENQUEUED
| URB_TYPE_INT
;
809 qtd
->status
|= slot
<< 16;
812 static void enqueue_an_ATL_packet(struct usb_hcd
*hcd
, struct isp1760_qh
*qh
,
813 struct isp1760_qtd
*qtd
)
815 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
816 u32 skip_map
, or_map
;
819 u32 atl_regs
, payload
;
823 * When this function is called from the interrupt handler to enqueue
824 * a follow-up packet, the SKIP register gets written and read back
825 * almost immediately. With ISP1761, this register requires a delay of
826 * 195ns between a write and subsequent read (see section 15.1.1.3).
829 skip_map
= isp1760_readl(hcd
->regs
+ HC_ATL_PTD_SKIPMAP_REG
);
832 slot
= __ffs(skip_map
);
833 queue_entry
= 1 << slot
;
835 atl_regs
= ATL_REGS_OFFSET
+ slot
* sizeof(struct ptd
);
837 payload
= alloc_mem(priv
, qtd
->length
);
839 enqueue_one_atl_qtd(atl_regs
, payload
, priv
, qh
, qtd
->urb
, slot
, qtd
);
841 or_map
= isp1760_readl(hcd
->regs
+ HC_ATL_IRQ_MASK_OR_REG
);
842 or_map
|= queue_entry
;
843 isp1760_writel(or_map
, hcd
->regs
+ HC_ATL_IRQ_MASK_OR_REG
);
845 skip_map
&= ~queue_entry
;
846 isp1760_writel(skip_map
, hcd
->regs
+ HC_ATL_PTD_SKIPMAP_REG
);
848 buffstatus
= isp1760_readl(hcd
->regs
+ HC_BUFFER_STATUS_REG
);
849 buffstatus
|= ATL_BUFFER
;
850 isp1760_writel(buffstatus
, hcd
->regs
+ HC_BUFFER_STATUS_REG
);
853 static void enqueue_an_INT_packet(struct usb_hcd
*hcd
, struct isp1760_qh
*qh
,
854 struct isp1760_qtd
*qtd
)
856 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
857 u32 skip_map
, or_map
;
860 u32 int_regs
, payload
;
864 * When this function is called from the interrupt handler to enqueue
865 * a follow-up packet, the SKIP register gets written and read back
866 * almost immediately. With ISP1761, this register requires a delay of
867 * 195ns between a write and subsequent read (see section 15.1.1.3).
870 skip_map
= isp1760_readl(hcd
->regs
+ HC_INT_PTD_SKIPMAP_REG
);
873 slot
= __ffs(skip_map
);
874 queue_entry
= 1 << slot
;
876 int_regs
= INT_REGS_OFFSET
+ slot
* sizeof(struct ptd
);
878 payload
= alloc_mem(priv
, qtd
->length
);
880 enqueue_one_int_qtd(int_regs
, payload
, priv
, qh
, qtd
->urb
, slot
, qtd
);
882 or_map
= isp1760_readl(hcd
->regs
+ HC_INT_IRQ_MASK_OR_REG
);
883 or_map
|= queue_entry
;
884 isp1760_writel(or_map
, hcd
->regs
+ HC_INT_IRQ_MASK_OR_REG
);
886 skip_map
&= ~queue_entry
;
887 isp1760_writel(skip_map
, hcd
->regs
+ HC_INT_PTD_SKIPMAP_REG
);
889 buffstatus
= isp1760_readl(hcd
->regs
+ HC_BUFFER_STATUS_REG
);
890 buffstatus
|= INT_BUFFER
;
891 isp1760_writel(buffstatus
, hcd
->regs
+ HC_BUFFER_STATUS_REG
);
894 static void isp1760_urb_done(struct isp1760_hcd
*priv
, struct urb
*urb
, int status
)
895 __releases(priv
->lock
)
896 __acquires(priv
->lock
)
898 if (!urb
->unlinked
) {
899 if (status
== -EINPROGRESS
)
903 /* complete() can reenter this HCD */
904 usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv
), urb
);
905 spin_unlock(&priv
->lock
);
906 usb_hcd_giveback_urb(priv_to_hcd(priv
), urb
, status
);
907 spin_lock(&priv
->lock
);
910 static void isp1760_qtd_free(struct isp1760_qtd
*qtd
)
912 kmem_cache_free(qtd_cachep
, qtd
);
915 static struct isp1760_qtd
*clean_this_qtd(struct isp1760_qtd
*qtd
)
917 struct isp1760_qtd
*tmp_qtd
;
919 tmp_qtd
= qtd
->hw_next
;
920 list_del(&qtd
->qtd_list
);
921 isp1760_qtd_free(qtd
);
926 * Remove this QTD from the QH list and free its memory. If this QTD
927 * isn't the last one than remove also his successor(s).
928 * Returns the QTD which is part of an new URB and should be enqueued.
930 static struct isp1760_qtd
*clean_up_qtdlist(struct isp1760_qtd
*qtd
)
932 struct isp1760_qtd
*tmp_qtd
;
936 tmp_qtd
= qtd
->hw_next
;
937 last_one
= qtd
->status
& URB_COMPLETE_NOTIFY
;
938 list_del(&qtd
->qtd_list
);
939 isp1760_qtd_free(qtd
);
941 } while (!last_one
&& qtd
);
946 static void do_atl_int(struct usb_hcd
*usb_hcd
)
948 struct isp1760_hcd
*priv
= hcd_to_priv(usb_hcd
);
949 u32 done_map
, skip_map
;
951 struct urb
*urb
= NULL
;
958 u32 status
= -EINVAL
;
960 struct isp1760_qtd
*qtd
;
961 struct isp1760_qh
*qh
;
965 done_map
= isp1760_readl(usb_hcd
->regs
+
966 HC_ATL_PTD_DONEMAP_REG
);
967 skip_map
= isp1760_readl(usb_hcd
->regs
+
968 HC_ATL_PTD_SKIPMAP_REG
);
970 or_map
= isp1760_readl(usb_hcd
->regs
+ HC_ATL_IRQ_MASK_OR_REG
);
972 isp1760_writel(or_map
, usb_hcd
->regs
+ HC_ATL_IRQ_MASK_OR_REG
);
974 atl_regs_base
= ATL_REGS_OFFSET
;
982 queue_entry
= __ffs(done_map
);
983 done_map
&= ~(1 << queue_entry
);
984 skip_map
|= 1 << queue_entry
;
986 atl_regs
= atl_regs_base
+ queue_entry
* sizeof(struct ptd
);
988 urb
= priv
->atl_ints
[queue_entry
].urb
;
989 qtd
= priv
->atl_ints
[queue_entry
].qtd
;
990 qh
= priv
->atl_ints
[queue_entry
].qh
;
991 payload
= priv
->atl_ints
[queue_entry
].payload
;
994 printk(KERN_ERR
"qh is 0\n");
997 isp1760_writel(atl_regs
+ ISP_BANK(0), usb_hcd
->regs
+
999 isp1760_writel(payload
+ ISP_BANK(1), usb_hcd
->regs
+
1002 * write bank1 address twice to ensure the 90ns delay (time
1003 * between BANK0 write and the priv_read_copy() call is at
1004 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns)
1006 isp1760_writel(payload
+ ISP_BANK(1), usb_hcd
->regs
+
1009 priv_read_copy(priv
, (u32
*)&ptd
, usb_hcd
->regs
+ atl_regs
+
1010 ISP_BANK(0), sizeof(ptd
));
1012 dw1
= le32_to_cpu(ptd
.dw1
);
1013 dw2
= le32_to_cpu(ptd
.dw2
);
1014 dw3
= le32_to_cpu(ptd
.dw3
);
1015 rl
= (dw2
>> 25) & 0x0f;
1016 nakcount
= (dw3
>> 19) & 0xf;
1018 /* Transfer Error, *but* active and no HALT -> reload */
1019 if ((dw3
& DW3_ERROR_BIT
) && (dw3
& DW3_QTD_ACTIVE
) &&
1020 !(dw3
& DW3_HALT_BIT
)) {
1022 /* according to ppriv code, we have to
1023 * reload this one if trasfered bytes != requested bytes
1024 * else act like everything went smooth..
1025 * XXX This just doesn't feel right and hasn't
1029 length
= PTD_XFERRED_LENGTH(dw3
);
1030 printk(KERN_ERR
"Should reload now.... transfered %d "
1031 "of %zu\n", length
, qtd
->length
);
1035 if (!nakcount
&& (dw3
& DW3_QTD_ACTIVE
)) {
1039 * NAKs are handled in HW by the chip. Usually if the
1040 * device is not able to send data fast enough.
1041 * This did not trigger for a long time now.
1043 printk(KERN_ERR
"Reloading ptd %p/%p... qh %p readed: "
1044 "%d of %zu done: %08x cur: %08x\n", qtd
,
1045 urb
, qh
, PTD_XFERRED_LENGTH(dw3
),
1046 qtd
->length
, done_map
,
1047 (1 << queue_entry
));
1049 /* RL counter = ERR counter */
1050 dw3
&= ~(0xf << 19);
1052 dw3
&= ~(3 << (55 - 32));
1053 dw3
|= ERR_COUNTER
<< (55 - 32);
1056 * It is not needed to write skip map back because it
1057 * is unchanged. Just make sure that this entry is
1058 * unskipped once it gets written to the HW.
1060 skip_map
&= ~(1 << queue_entry
);
1061 or_map
= isp1760_readl(usb_hcd
->regs
+
1062 HC_ATL_IRQ_MASK_OR_REG
);
1063 or_map
|= 1 << queue_entry
;
1064 isp1760_writel(or_map
, usb_hcd
->regs
+
1065 HC_ATL_IRQ_MASK_OR_REG
);
1067 ptd
.dw3
= cpu_to_le32(dw3
);
1068 priv_write_copy(priv
, (u32
*)&ptd
, usb_hcd
->regs
+
1069 atl_regs
, sizeof(ptd
));
1071 ptd
.dw0
|= cpu_to_le32(PTD_VALID
);
1072 priv_write_copy(priv
, (u32
*)&ptd
, usb_hcd
->regs
+
1073 atl_regs
, sizeof(ptd
));
1075 buffstatus
= isp1760_readl(usb_hcd
->regs
+
1076 HC_BUFFER_STATUS_REG
);
1077 buffstatus
|= ATL_BUFFER
;
1078 isp1760_writel(buffstatus
, usb_hcd
->regs
+
1079 HC_BUFFER_STATUS_REG
);
1083 error
= check_error(&ptd
);
1086 priv
->atl_ints
[queue_entry
].qh
->toggle
= 0;
1087 priv
->atl_ints
[queue_entry
].qh
->ping
= 0;
1088 urb
->status
= -EPIPE
;
1091 printk(KERN_ERR
"Error in %s().\n", __func__
);
1092 printk(KERN_ERR
"IN dw0: %08x dw1: %08x dw2: %08x "
1093 "dw3: %08x dw4: %08x dw5: %08x dw6: "
1095 ptd
.dw0
, ptd
.dw1
, ptd
.dw2
, ptd
.dw3
,
1096 ptd
.dw4
, ptd
.dw5
, ptd
.dw6
, ptd
.dw7
);
1099 if (usb_pipetype(urb
->pipe
) == PIPE_BULK
) {
1100 priv
->atl_ints
[queue_entry
].qh
->toggle
= dw3
&
1102 priv
->atl_ints
[queue_entry
].qh
->ping
= dw3
&
1107 length
= PTD_XFERRED_LENGTH(dw3
);
1109 switch (DW1_GET_PID(dw1
)) {
1111 priv_read_copy(priv
,
1112 priv
->atl_ints
[queue_entry
].data_buffer
,
1113 usb_hcd
->regs
+ payload
+ ISP_BANK(1),
1118 urb
->actual_length
+= length
;
1125 priv
->atl_ints
[queue_entry
].data_buffer
= NULL
;
1126 priv
->atl_ints
[queue_entry
].urb
= NULL
;
1127 priv
->atl_ints
[queue_entry
].qtd
= NULL
;
1128 priv
->atl_ints
[queue_entry
].qh
= NULL
;
1130 free_mem(priv
, payload
);
1132 isp1760_writel(skip_map
, usb_hcd
->regs
+
1133 HC_ATL_PTD_SKIPMAP_REG
);
1135 if (urb
->status
== -EPIPE
) {
1136 /* HALT was received */
1138 qtd
= clean_up_qtdlist(qtd
);
1139 isp1760_urb_done(priv
, urb
, urb
->status
);
1141 } else if (usb_pipebulk(urb
->pipe
) && (length
< qtd
->length
)) {
1142 /* short BULK received */
1144 if (urb
->transfer_flags
& URB_SHORT_NOT_OK
) {
1145 urb
->status
= -EREMOTEIO
;
1146 isp1760_dbg(priv
, "short bulk, %d instead %zu "
1147 "with URB_SHORT_NOT_OK flag.\n",
1148 length
, qtd
->length
);
1151 if (urb
->status
== -EINPROGRESS
)
1154 qtd
= clean_up_qtdlist(qtd
);
1156 isp1760_urb_done(priv
, urb
, urb
->status
);
1158 } else if (qtd
->status
& URB_COMPLETE_NOTIFY
) {
1159 /* that was the last qtd of that URB */
1161 if (urb
->status
== -EINPROGRESS
)
1164 qtd
= clean_this_qtd(qtd
);
1165 isp1760_urb_done(priv
, urb
, urb
->status
);
1168 /* next QTD of this URB */
1170 qtd
= clean_this_qtd(qtd
);
1175 enqueue_an_ATL_packet(usb_hcd
, qh
, qtd
);
1177 skip_map
= isp1760_readl(usb_hcd
->regs
+
1178 HC_ATL_PTD_SKIPMAP_REG
);
1182 static void do_intl_int(struct usb_hcd
*usb_hcd
)
1184 struct isp1760_hcd
*priv
= hcd_to_priv(usb_hcd
);
1185 u32 done_map
, skip_map
;
1187 struct urb
*urb
= NULL
;
1195 struct isp1760_qtd
*qtd
;
1196 struct isp1760_qh
*qh
;
1198 done_map
= isp1760_readl(usb_hcd
->regs
+
1199 HC_INT_PTD_DONEMAP_REG
);
1200 skip_map
= isp1760_readl(usb_hcd
->regs
+
1201 HC_INT_PTD_SKIPMAP_REG
);
1203 or_map
= isp1760_readl(usb_hcd
->regs
+ HC_INT_IRQ_MASK_OR_REG
);
1204 or_map
&= ~done_map
;
1205 isp1760_writel(or_map
, usb_hcd
->regs
+ HC_INT_IRQ_MASK_OR_REG
);
1207 int_regs_base
= INT_REGS_OFFSET
;
1213 queue_entry
= __ffs(done_map
);
1214 done_map
&= ~(1 << queue_entry
);
1215 skip_map
|= 1 << queue_entry
;
1217 int_regs
= int_regs_base
+ queue_entry
* sizeof(struct ptd
);
1218 urb
= priv
->int_ints
[queue_entry
].urb
;
1219 qtd
= priv
->int_ints
[queue_entry
].qtd
;
1220 qh
= priv
->int_ints
[queue_entry
].qh
;
1221 payload
= priv
->int_ints
[queue_entry
].payload
;
1224 printk(KERN_ERR
"(INT) qh is 0\n");
1228 isp1760_writel(int_regs
+ ISP_BANK(0), usb_hcd
->regs
+
1230 isp1760_writel(payload
+ ISP_BANK(1), usb_hcd
->regs
+
1233 * write bank1 address twice to ensure the 90ns delay (time
1234 * between BANK0 write and the priv_read_copy() call is at
1235 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
1237 isp1760_writel(payload
+ ISP_BANK(1), usb_hcd
->regs
+
1240 priv_read_copy(priv
, (u32
*)&ptd
, usb_hcd
->regs
+ int_regs
+
1241 ISP_BANK(0), sizeof(ptd
));
1242 dw1
= le32_to_cpu(ptd
.dw1
);
1243 dw3
= le32_to_cpu(ptd
.dw3
);
1244 check_int_err_status(le32_to_cpu(ptd
.dw4
));
1246 error
= check_error(&ptd
);
1249 printk(KERN_ERR
"Error in %s().\n", __func__
);
1250 printk(KERN_ERR
"IN dw0: %08x dw1: %08x dw2: %08x "
1251 "dw3: %08x dw4: %08x dw5: %08x dw6: "
1253 ptd
.dw0
, ptd
.dw1
, ptd
.dw2
, ptd
.dw3
,
1254 ptd
.dw4
, ptd
.dw5
, ptd
.dw6
, ptd
.dw7
);
1256 urb
->status
= -EPIPE
;
1257 priv
->int_ints
[queue_entry
].qh
->toggle
= 0;
1258 priv
->int_ints
[queue_entry
].qh
->ping
= 0;
1261 priv
->int_ints
[queue_entry
].qh
->toggle
=
1263 priv
->int_ints
[queue_entry
].qh
->ping
= dw3
& (1 << 26);
1266 if (urb
->dev
->speed
!= USB_SPEED_HIGH
)
1267 length
= PTD_XFERRED_LENGTH_LO(dw3
);
1269 length
= PTD_XFERRED_LENGTH(dw3
);
1272 switch (DW1_GET_PID(dw1
)) {
1274 priv_read_copy(priv
,
1275 priv
->int_ints
[queue_entry
].data_buffer
,
1276 usb_hcd
->regs
+ payload
+ ISP_BANK(1),
1280 urb
->actual_length
+= length
;
1287 priv
->int_ints
[queue_entry
].data_buffer
= NULL
;
1288 priv
->int_ints
[queue_entry
].urb
= NULL
;
1289 priv
->int_ints
[queue_entry
].qtd
= NULL
;
1290 priv
->int_ints
[queue_entry
].qh
= NULL
;
1292 isp1760_writel(skip_map
, usb_hcd
->regs
+
1293 HC_INT_PTD_SKIPMAP_REG
);
1294 free_mem(priv
, payload
);
1296 if (urb
->status
== -EPIPE
) {
1299 qtd
= clean_up_qtdlist(qtd
);
1300 isp1760_urb_done(priv
, urb
, urb
->status
);
1302 } else if (qtd
->status
& URB_COMPLETE_NOTIFY
) {
1304 if (urb
->status
== -EINPROGRESS
)
1307 qtd
= clean_this_qtd(qtd
);
1308 isp1760_urb_done(priv
, urb
, urb
->status
);
1311 /* next QTD of this URB */
1313 qtd
= clean_this_qtd(qtd
);
1318 enqueue_an_INT_packet(usb_hcd
, qh
, qtd
);
1320 skip_map
= isp1760_readl(usb_hcd
->regs
+
1321 HC_INT_PTD_SKIPMAP_REG
);
1325 #define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
1326 static struct isp1760_qh
*qh_make(struct isp1760_hcd
*priv
, struct urb
*urb
,
1329 struct isp1760_qh
*qh
;
1332 qh
= isp1760_qh_alloc(priv
, flags
);
1337 * init endpoint/device data for this QH
1339 is_input
= usb_pipein(urb
->pipe
);
1340 type
= usb_pipetype(urb
->pipe
);
1342 if (type
== PIPE_INTERRUPT
) {
1344 if (urb
->dev
->speed
== USB_SPEED_HIGH
) {
1346 qh
->period
= urb
->interval
>> 3;
1347 if (qh
->period
== 0 && urb
->interval
!= 1) {
1348 /* NOTE interval 2 or 4 uframes could work.
1349 * But interval 1 scheduling is simpler, and
1350 * includes high bandwidth.
1352 printk(KERN_ERR
"intr period %d uframes, NYET!",
1358 qh
->period
= urb
->interval
;
1362 /* support for tt scheduling, and access to toggles */
1365 if (!usb_pipecontrol(urb
->pipe
))
1366 usb_settoggle(urb
->dev
, usb_pipeendpoint(urb
->pipe
), !is_input
,
1372 * For control/bulk/interrupt, return QH with these TDs appended.
1373 * Allocates and initializes the QH if necessary.
1374 * Returns null if it can't allocate a QH it needs to.
1375 * If the QH has TDs (urbs) already, that's great.
1377 static struct isp1760_qh
*qh_append_tds(struct isp1760_hcd
*priv
,
1378 struct urb
*urb
, struct list_head
*qtd_list
, int epnum
,
1381 struct isp1760_qh
*qh
;
1382 struct isp1760_qtd
*qtd
;
1383 struct isp1760_qtd
*prev_qtd
;
1385 qh
= (struct isp1760_qh
*)*ptr
;
1387 /* can't sleep here, we have priv->lock... */
1388 qh
= qh_make(priv
, urb
, GFP_ATOMIC
);
1394 qtd
= list_entry(qtd_list
->next
, struct isp1760_qtd
,
1396 if (!list_empty(&qh
->qtd_list
))
1397 prev_qtd
= list_entry(qh
->qtd_list
.prev
,
1398 struct isp1760_qtd
, qtd_list
);
1402 list_splice(qtd_list
, qh
->qtd_list
.prev
);
1404 BUG_ON(prev_qtd
->hw_next
);
1405 prev_qtd
->hw_next
= qtd
;
1412 static void qtd_list_free(struct isp1760_hcd
*priv
, struct urb
*urb
,
1413 struct list_head
*qtd_list
)
1415 struct list_head
*entry
, *temp
;
1417 list_for_each_safe(entry
, temp
, qtd_list
) {
1418 struct isp1760_qtd
*qtd
;
1420 qtd
= list_entry(entry
, struct isp1760_qtd
, qtd_list
);
1421 list_del(&qtd
->qtd_list
);
1422 isp1760_qtd_free(qtd
);
1426 static int isp1760_prepare_enqueue(struct isp1760_hcd
*priv
, struct urb
*urb
,
1427 struct list_head
*qtd_list
, gfp_t mem_flags
, packet_enqueue
*p
)
1429 struct isp1760_qtd
*qtd
;
1431 unsigned long flags
;
1432 struct isp1760_qh
*qh
= NULL
;
1436 qtd
= list_entry(qtd_list
->next
, struct isp1760_qtd
, qtd_list
);
1437 epnum
= urb
->ep
->desc
.bEndpointAddress
;
1439 spin_lock_irqsave(&priv
->lock
, flags
);
1440 if (!test_bit(HCD_FLAG_HW_ACCESSIBLE
, &priv_to_hcd(priv
)->flags
)) {
1444 rc
= usb_hcd_link_urb_to_ep(priv_to_hcd(priv
), urb
);
1448 qh
= urb
->ep
->hcpriv
;
1450 qh_busy
= !list_empty(&qh
->qtd_list
);
1454 qh
= qh_append_tds(priv
, urb
, qtd_list
, epnum
, &urb
->ep
->hcpriv
);
1456 usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv
), urb
);
1462 p(priv_to_hcd(priv
), qh
, qtd
);
1465 spin_unlock_irqrestore(&priv
->lock
, flags
);
1467 qtd_list_free(priv
, urb
, qtd_list
);
1471 static struct isp1760_qtd
*isp1760_qtd_alloc(struct isp1760_hcd
*priv
,
1474 struct isp1760_qtd
*qtd
;
1476 qtd
= kmem_cache_zalloc(qtd_cachep
, flags
);
1478 INIT_LIST_HEAD(&qtd
->qtd_list
);
1484 * create a list of filled qtds for this URB; won't link into qh.
1486 static struct list_head
*qh_urb_transaction(struct isp1760_hcd
*priv
,
1487 struct urb
*urb
, struct list_head
*head
, gfp_t flags
)
1489 struct isp1760_qtd
*qtd
, *qtd_prev
;
1496 * URBs map to sequences of QTDs: one logical transaction
1498 qtd
= isp1760_qtd_alloc(priv
, flags
);
1502 list_add_tail(&qtd
->qtd_list
, head
);
1504 urb
->status
= -EINPROGRESS
;
1507 /* for split transactions, SplitXState initialized to zero */
1509 len
= urb
->transfer_buffer_length
;
1510 is_input
= usb_pipein(urb
->pipe
);
1511 if (usb_pipecontrol(urb
->pipe
)) {
1513 qtd_fill(qtd
, urb
->setup_packet
,
1514 sizeof(struct usb_ctrlrequest
),
1517 /* ... and always at least one more pid */
1518 token
^= DATA_TOGGLE
;
1520 qtd
= isp1760_qtd_alloc(priv
, flags
);
1524 qtd_prev
->hw_next
= qtd
;
1525 list_add_tail(&qtd
->qtd_list
, head
);
1527 /* for zero length DATA stages, STATUS is always IN */
1533 * data transfer stage: buffer setup
1535 buf
= urb
->transfer_buffer
;
1542 maxpacket
= max_packet(usb_maxpacket(urb
->dev
, urb
->pipe
, !is_input
));
1545 * buffer gets wrapped in one or more qtds;
1546 * last one may be "short" (including zero len)
1547 * and may serve as a control status ack
1553 /* XXX This looks like usb storage / SCSI bug */
1554 printk(KERN_ERR
"buf is null, dma is %08lx len is %d\n",
1555 (long unsigned)urb
->transfer_dma
, len
);
1559 this_qtd_len
= qtd_fill(qtd
, buf
, len
, token
);
1560 len
-= this_qtd_len
;
1561 buf
+= this_qtd_len
;
1563 /* qh makes control packets use qtd toggle; maybe switch it */
1564 if ((maxpacket
& (this_qtd_len
+ (maxpacket
- 1))) == 0)
1565 token
^= DATA_TOGGLE
;
1571 qtd
= isp1760_qtd_alloc(priv
, flags
);
1575 qtd_prev
->hw_next
= qtd
;
1576 list_add_tail(&qtd
->qtd_list
, head
);
1580 * control requests may need a terminating data "status" ack;
1581 * bulk ones may need a terminating short packet (zero length).
1583 if (urb
->transfer_buffer_length
!= 0) {
1586 if (usb_pipecontrol(urb
->pipe
)) {
1588 /* "in" <--> "out" */
1591 token
|= DATA_TOGGLE
;
1592 } else if (usb_pipebulk(urb
->pipe
)
1593 && (urb
->transfer_flags
& URB_ZERO_PACKET
)
1594 && !(urb
->transfer_buffer_length
% maxpacket
)) {
1599 qtd
= isp1760_qtd_alloc(priv
, flags
);
1603 qtd_prev
->hw_next
= qtd
;
1604 list_add_tail(&qtd
->qtd_list
, head
);
1606 /* never any data in such packets */
1607 qtd_fill(qtd
, NULL
, 0, token
);
1611 qtd
->status
= URB_COMPLETE_NOTIFY
;
1615 qtd_list_free(priv
, urb
, head
);
1619 static int isp1760_urb_enqueue(struct usb_hcd
*hcd
, struct urb
*urb
,
1622 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
1623 struct list_head qtd_list
;
1626 INIT_LIST_HEAD(&qtd_list
);
1628 switch (usb_pipetype(urb
->pipe
)) {
1632 if (!qh_urb_transaction(priv
, urb
, &qtd_list
, mem_flags
))
1634 pe
= enqueue_an_ATL_packet
;
1637 case PIPE_INTERRUPT
:
1638 if (!qh_urb_transaction(priv
, urb
, &qtd_list
, mem_flags
))
1640 pe
= enqueue_an_INT_packet
;
1643 case PIPE_ISOCHRONOUS
:
1644 printk(KERN_ERR
"PIPE_ISOCHRONOUS ain't supported\n");
1649 return isp1760_prepare_enqueue(priv
, urb
, &qtd_list
, mem_flags
, pe
);
1652 static int isp1760_urb_dequeue(struct usb_hcd
*hcd
, struct urb
*urb
,
1655 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
1656 struct inter_packet_info
*ints
;
1658 u32 reg_base
, or_reg
, skip_reg
;
1659 unsigned long flags
;
1663 switch (usb_pipetype(urb
->pipe
)) {
1664 case PIPE_ISOCHRONOUS
:
1668 case PIPE_INTERRUPT
:
1669 ints
= priv
->int_ints
;
1670 reg_base
= INT_REGS_OFFSET
;
1671 or_reg
= HC_INT_IRQ_MASK_OR_REG
;
1672 skip_reg
= HC_INT_PTD_SKIPMAP_REG
;
1673 pe
= enqueue_an_INT_packet
;
1677 ints
= priv
->atl_ints
;
1678 reg_base
= ATL_REGS_OFFSET
;
1679 or_reg
= HC_ATL_IRQ_MASK_OR_REG
;
1680 skip_reg
= HC_ATL_PTD_SKIPMAP_REG
;
1681 pe
= enqueue_an_ATL_packet
;
1685 memset(&ptd
, 0, sizeof(ptd
));
1686 spin_lock_irqsave(&priv
->lock
, flags
);
1688 for (i
= 0; i
< 32; i
++) {
1689 if (ints
->urb
== urb
) {
1692 struct isp1760_qtd
*qtd
;
1693 struct isp1760_qh
*qh
= ints
->qh
;
1695 skip_map
= isp1760_readl(hcd
->regs
+ skip_reg
);
1697 isp1760_writel(skip_map
, hcd
->regs
+ skip_reg
);
1699 or_map
= isp1760_readl(hcd
->regs
+ or_reg
);
1700 or_map
&= ~(1 << i
);
1701 isp1760_writel(or_map
, hcd
->regs
+ or_reg
);
1703 priv_write_copy(priv
, (u32
*)&ptd
, hcd
->regs
+ reg_base
1704 + i
* sizeof(ptd
), sizeof(ptd
));
1706 qtd
= clean_up_qtdlist(qtd
);
1708 free_mem(priv
, ints
->payload
);
1713 ints
->data_buffer
= NULL
;
1716 isp1760_urb_done(priv
, urb
, status
);
1721 } else if (ints
->qtd
) {
1722 struct isp1760_qtd
*qtd
, *prev_qtd
= ints
->qtd
;
1724 for (qtd
= ints
->qtd
->hw_next
; qtd
; qtd
= qtd
->hw_next
) {
1725 if (qtd
->urb
== urb
) {
1726 prev_qtd
->hw_next
= clean_up_qtdlist(qtd
);
1727 isp1760_urb_done(priv
, urb
, status
);
1732 /* we found the urb before the end of the list */
1739 spin_unlock_irqrestore(&priv
->lock
, flags
);
1743 static irqreturn_t
isp1760_irq(struct usb_hcd
*usb_hcd
)
1745 struct isp1760_hcd
*priv
= hcd_to_priv(usb_hcd
);
1747 irqreturn_t irqret
= IRQ_NONE
;
1749 spin_lock(&priv
->lock
);
1751 if (!(usb_hcd
->state
& HC_STATE_RUNNING
))
1754 imask
= isp1760_readl(usb_hcd
->regs
+ HC_INTERRUPT_REG
);
1755 if (unlikely(!imask
))
1758 isp1760_writel(imask
, usb_hcd
->regs
+ HC_INTERRUPT_REG
);
1759 if (imask
& HC_ATL_INT
)
1760 do_atl_int(usb_hcd
);
1762 if (imask
& HC_INTL_INT
)
1763 do_intl_int(usb_hcd
);
1765 irqret
= IRQ_HANDLED
;
1767 spin_unlock(&priv
->lock
);
1771 static int isp1760_hub_status_data(struct usb_hcd
*hcd
, char *buf
)
1773 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
1774 u32 temp
, status
= 0;
1777 unsigned long flags
;
1779 /* if !USB_SUSPEND, root hub timers won't get shut down ... */
1780 if (!HC_IS_RUNNING(hcd
->state
))
1783 /* init status to no-changes */
1787 spin_lock_irqsave(&priv
->lock
, flags
);
1788 temp
= isp1760_readl(hcd
->regs
+ HC_PORTSC1
);
1790 if (temp
& PORT_OWNER
) {
1791 if (temp
& PORT_CSC
) {
1793 isp1760_writel(temp
, hcd
->regs
+ HC_PORTSC1
);
1799 * Return status information even for ports with OWNER set.
1800 * Otherwise khubd wouldn't see the disconnect event when a
1801 * high-speed device is switched over to the companion
1802 * controller by the user.
1805 if ((temp
& mask
) != 0
1806 || ((temp
& PORT_RESUME
) != 0
1807 && time_after_eq(jiffies
,
1808 priv
->reset_done
))) {
1809 buf
[0] |= 1 << (0 + 1);
1812 /* FIXME autosuspend idle root hubs */
1814 spin_unlock_irqrestore(&priv
->lock
, flags
);
1815 return status
? retval
: 0;
1818 static void isp1760_hub_descriptor(struct isp1760_hcd
*priv
,
1819 struct usb_hub_descriptor
*desc
)
1821 int ports
= HCS_N_PORTS(priv
->hcs_params
);
1824 desc
->bDescriptorType
= 0x29;
1825 /* priv 1.0, 2.3.9 says 20ms max */
1826 desc
->bPwrOn2PwrGood
= 10;
1827 desc
->bHubContrCurrent
= 0;
1829 desc
->bNbrPorts
= ports
;
1830 temp
= 1 + (ports
/ 8);
1831 desc
->bDescLength
= 7 + 2 * temp
;
1833 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
1834 memset(&desc
->bitmap
[0], 0, temp
);
1835 memset(&desc
->bitmap
[temp
], 0xff, temp
);
1837 /* per-port overcurrent reporting */
1839 if (HCS_PPC(priv
->hcs_params
))
1840 /* per-port power control */
1843 /* no power switching */
1845 desc
->wHubCharacteristics
= cpu_to_le16(temp
);
1848 #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
1850 static int check_reset_complete(struct isp1760_hcd
*priv
, int index
,
1851 u32 __iomem
*status_reg
, int port_status
)
1853 if (!(port_status
& PORT_CONNECT
))
1856 /* if reset finished and it's still not enabled -- handoff */
1857 if (!(port_status
& PORT_PE
)) {
1859 printk(KERN_ERR
"port %d full speed --> companion\n",
1862 port_status
|= PORT_OWNER
;
1863 port_status
&= ~PORT_RWC_BITS
;
1864 isp1760_writel(port_status
, status_reg
);
1867 printk(KERN_ERR
"port %d high speed\n", index
+ 1);
1872 static int isp1760_hub_control(struct usb_hcd
*hcd
, u16 typeReq
,
1873 u16 wValue
, u16 wIndex
, char *buf
, u16 wLength
)
1875 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
1876 int ports
= HCS_N_PORTS(priv
->hcs_params
);
1877 u32 __iomem
*status_reg
= hcd
->regs
+ HC_PORTSC1
;
1879 unsigned long flags
;
1884 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
1885 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
1886 * (track current state ourselves) ... blink for diagnostics,
1887 * power, "this is the one", etc. EHCI spec supports this.
1890 spin_lock_irqsave(&priv
->lock
, flags
);
1892 case ClearHubFeature
:
1894 case C_HUB_LOCAL_POWER
:
1895 case C_HUB_OVER_CURRENT
:
1896 /* no hub-wide feature/status flags */
1902 case ClearPortFeature
:
1903 if (!wIndex
|| wIndex
> ports
)
1906 temp
= isp1760_readl(status_reg
);
1909 * Even if OWNER is set, so the port is owned by the
1910 * companion controller, khubd needs to be able to clear
1911 * the port-change status bits (especially
1912 * USB_PORT_FEAT_C_CONNECTION).
1916 case USB_PORT_FEAT_ENABLE
:
1917 isp1760_writel(temp
& ~PORT_PE
, status_reg
);
1919 case USB_PORT_FEAT_C_ENABLE
:
1922 case USB_PORT_FEAT_SUSPEND
:
1923 if (temp
& PORT_RESET
)
1926 if (temp
& PORT_SUSPEND
) {
1927 if ((temp
& PORT_PE
) == 0)
1929 /* resume signaling for 20 msec */
1930 temp
&= ~(PORT_RWC_BITS
);
1931 isp1760_writel(temp
| PORT_RESUME
,
1933 priv
->reset_done
= jiffies
+
1934 msecs_to_jiffies(20);
1937 case USB_PORT_FEAT_C_SUSPEND
:
1938 /* we auto-clear this feature */
1940 case USB_PORT_FEAT_POWER
:
1941 if (HCS_PPC(priv
->hcs_params
))
1942 isp1760_writel(temp
& ~PORT_POWER
, status_reg
);
1944 case USB_PORT_FEAT_C_CONNECTION
:
1945 isp1760_writel(temp
| PORT_CSC
,
1948 case USB_PORT_FEAT_C_OVER_CURRENT
:
1951 case USB_PORT_FEAT_C_RESET
:
1952 /* GetPortStatus clears reset */
1957 isp1760_readl(hcd
->regs
+ HC_USBCMD
);
1959 case GetHubDescriptor
:
1960 isp1760_hub_descriptor(priv
, (struct usb_hub_descriptor
*)
1964 /* no hub-wide feature/status flags */
1968 if (!wIndex
|| wIndex
> ports
)
1972 temp
= isp1760_readl(status_reg
);
1974 /* wPortChange bits */
1975 if (temp
& PORT_CSC
)
1976 status
|= 1 << USB_PORT_FEAT_C_CONNECTION
;
1979 /* whoever resumes must GetPortStatus to complete it!! */
1980 if (temp
& PORT_RESUME
) {
1981 printk(KERN_ERR
"Port resume should be skipped.\n");
1983 /* Remote Wakeup received? */
1984 if (!priv
->reset_done
) {
1985 /* resume signaling for 20 msec */
1986 priv
->reset_done
= jiffies
1987 + msecs_to_jiffies(20);
1988 /* check the port again */
1989 mod_timer(&priv_to_hcd(priv
)->rh_timer
,
1993 /* resume completed? */
1994 else if (time_after_eq(jiffies
,
1995 priv
->reset_done
)) {
1996 status
|= 1 << USB_PORT_FEAT_C_SUSPEND
;
1997 priv
->reset_done
= 0;
1999 /* stop resume signaling */
2000 temp
= isp1760_readl(status_reg
);
2002 temp
& ~(PORT_RWC_BITS
| PORT_RESUME
),
2004 retval
= handshake(priv
, status_reg
,
2005 PORT_RESUME
, 0, 2000 /* 2msec */);
2008 "port %d resume error %d\n",
2009 wIndex
+ 1, retval
);
2012 temp
&= ~(PORT_SUSPEND
|PORT_RESUME
|(3<<10));
2016 /* whoever resets must GetPortStatus to complete it!! */
2017 if ((temp
& PORT_RESET
)
2018 && time_after_eq(jiffies
,
2019 priv
->reset_done
)) {
2020 status
|= 1 << USB_PORT_FEAT_C_RESET
;
2021 priv
->reset_done
= 0;
2023 /* force reset to complete */
2024 isp1760_writel(temp
& ~PORT_RESET
,
2026 /* REVISIT: some hardware needs 550+ usec to clear
2027 * this bit; seems too long to spin routinely...
2029 retval
= handshake(priv
, status_reg
,
2030 PORT_RESET
, 0, 750);
2032 isp1760_err(priv
, "port %d reset error %d\n",
2033 wIndex
+ 1, retval
);
2037 /* see what we found out */
2038 temp
= check_reset_complete(priv
, wIndex
, status_reg
,
2039 isp1760_readl(status_reg
));
2042 * Even if OWNER is set, there's no harm letting khubd
2043 * see the wPortStatus values (they should all be 0 except
2044 * for PORT_POWER anyway).
2047 if (temp
& PORT_OWNER
)
2048 printk(KERN_ERR
"Warning: PORT_OWNER is set\n");
2050 if (temp
& PORT_CONNECT
) {
2051 status
|= 1 << USB_PORT_FEAT_CONNECTION
;
2052 /* status may be from integrated TT */
2053 status
|= ehci_port_speed(priv
, temp
);
2056 status
|= 1 << USB_PORT_FEAT_ENABLE
;
2057 if (temp
& (PORT_SUSPEND
|PORT_RESUME
))
2058 status
|= 1 << USB_PORT_FEAT_SUSPEND
;
2059 if (temp
& PORT_RESET
)
2060 status
|= 1 << USB_PORT_FEAT_RESET
;
2061 if (temp
& PORT_POWER
)
2062 status
|= 1 << USB_PORT_FEAT_POWER
;
2064 put_unaligned(cpu_to_le32(status
), (__le32
*) buf
);
2068 case C_HUB_LOCAL_POWER
:
2069 case C_HUB_OVER_CURRENT
:
2070 /* no hub-wide feature/status flags */
2076 case SetPortFeature
:
2077 selector
= wIndex
>> 8;
2079 if (!wIndex
|| wIndex
> ports
)
2082 temp
= isp1760_readl(status_reg
);
2083 if (temp
& PORT_OWNER
)
2086 /* temp &= ~PORT_RWC_BITS; */
2088 case USB_PORT_FEAT_ENABLE
:
2089 isp1760_writel(temp
| PORT_PE
, status_reg
);
2092 case USB_PORT_FEAT_SUSPEND
:
2093 if ((temp
& PORT_PE
) == 0
2094 || (temp
& PORT_RESET
) != 0)
2097 isp1760_writel(temp
| PORT_SUSPEND
, status_reg
);
2099 case USB_PORT_FEAT_POWER
:
2100 if (HCS_PPC(priv
->hcs_params
))
2101 isp1760_writel(temp
| PORT_POWER
,
2104 case USB_PORT_FEAT_RESET
:
2105 if (temp
& PORT_RESUME
)
2107 /* line status bits may report this as low speed,
2108 * which can be fine if this root hub has a
2109 * transaction translator built in.
2111 if ((temp
& (PORT_PE
|PORT_CONNECT
)) == PORT_CONNECT
2112 && PORT_USB11(temp
)) {
2119 * caller must wait, then call GetPortStatus
2120 * usb 2.0 spec says 50 ms resets on root
2122 priv
->reset_done
= jiffies
+
2123 msecs_to_jiffies(50);
2125 isp1760_writel(temp
, status_reg
);
2130 isp1760_readl(hcd
->regs
+ HC_USBCMD
);
2135 /* "stall" on error */
2138 spin_unlock_irqrestore(&priv
->lock
, flags
);
2142 static void isp1760_endpoint_disable(struct usb_hcd
*usb_hcd
,
2143 struct usb_host_endpoint
*ep
)
2145 struct isp1760_hcd
*priv
= hcd_to_priv(usb_hcd
);
2146 struct isp1760_qh
*qh
;
2147 struct isp1760_qtd
*qtd
;
2148 unsigned long flags
;
2150 spin_lock_irqsave(&priv
->lock
, flags
);
2157 /* more than entry might get removed */
2158 if (list_empty(&qh
->qtd_list
))
2161 qtd
= list_first_entry(&qh
->qtd_list
, struct isp1760_qtd
,
2164 if (qtd
->status
& URB_ENQUEUED
) {
2166 spin_unlock_irqrestore(&priv
->lock
, flags
);
2167 isp1760_urb_dequeue(usb_hcd
, qtd
->urb
, -ECONNRESET
);
2168 spin_lock_irqsave(&priv
->lock
, flags
);
2173 clean_up_qtdlist(qtd
);
2174 isp1760_urb_done(priv
, urb
, -ECONNRESET
);
2179 /* remove requests and leak them.
2180 * ATL are pretty fast done, INT could take a while...
2181 * The latter shoule be removed
2184 spin_unlock_irqrestore(&priv
->lock
, flags
);
2187 static int isp1760_get_frame(struct usb_hcd
*hcd
)
2189 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
2192 fr
= isp1760_readl(hcd
->regs
+ HC_FRINDEX
);
2193 return (fr
>> 3) % priv
->periodic_size
;
2196 static void isp1760_stop(struct usb_hcd
*hcd
)
2198 struct isp1760_hcd
*priv
= hcd_to_priv(hcd
);
2201 isp1760_hub_control(hcd
, ClearPortFeature
, USB_PORT_FEAT_POWER
, 1,
2205 spin_lock_irq(&priv
->lock
);
2208 temp
= isp1760_readl(hcd
->regs
+ HC_HW_MODE_CTRL
);
2209 isp1760_writel(temp
&= ~HW_GLOBAL_INTR_EN
, hcd
->regs
+ HC_HW_MODE_CTRL
);
2210 spin_unlock_irq(&priv
->lock
);
2212 isp1760_writel(0, hcd
->regs
+ HC_CONFIGFLAG
);
2215 static void isp1760_shutdown(struct usb_hcd
*hcd
)
2220 temp
= isp1760_readl(hcd
->regs
+ HC_HW_MODE_CTRL
);
2221 isp1760_writel(temp
&= ~HW_GLOBAL_INTR_EN
, hcd
->regs
+ HC_HW_MODE_CTRL
);
2223 command
= isp1760_readl(hcd
->regs
+ HC_USBCMD
);
2224 command
&= ~CMD_RUN
;
2225 isp1760_writel(command
, hcd
->regs
+ HC_USBCMD
);
2228 static const struct hc_driver isp1760_hc_driver
= {
2229 .description
= "isp1760-hcd",
2230 .product_desc
= "NXP ISP1760 USB Host Controller",
2231 .hcd_priv_size
= sizeof(struct isp1760_hcd
),
2233 .flags
= HCD_MEMORY
| HCD_USB2
,
2234 .reset
= isp1760_hc_setup
,
2235 .start
= isp1760_run
,
2236 .stop
= isp1760_stop
,
2237 .shutdown
= isp1760_shutdown
,
2238 .urb_enqueue
= isp1760_urb_enqueue
,
2239 .urb_dequeue
= isp1760_urb_dequeue
,
2240 .endpoint_disable
= isp1760_endpoint_disable
,
2241 .get_frame_number
= isp1760_get_frame
,
2242 .hub_status_data
= isp1760_hub_status_data
,
2243 .hub_control
= isp1760_hub_control
,
2246 int __init
init_kmem_once(void)
2248 qtd_cachep
= kmem_cache_create("isp1760_qtd",
2249 sizeof(struct isp1760_qtd
), 0, SLAB_TEMPORARY
|
2250 SLAB_MEM_SPREAD
, NULL
);
2255 qh_cachep
= kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh
),
2256 0, SLAB_TEMPORARY
| SLAB_MEM_SPREAD
, NULL
);
2259 kmem_cache_destroy(qtd_cachep
);
2266 void deinit_kmem_cache(void)
2268 kmem_cache_destroy(qtd_cachep
);
2269 kmem_cache_destroy(qh_cachep
);
2272 struct usb_hcd
*isp1760_register(phys_addr_t res_start
, resource_size_t res_len
,
2273 int irq
, unsigned long irqflags
,
2274 struct device
*dev
, const char *busname
,
2275 unsigned int devflags
)
2277 struct usb_hcd
*hcd
;
2278 struct isp1760_hcd
*priv
;
2282 return ERR_PTR(-ENODEV
);
2284 /* prevent usb-core allocating DMA pages */
2285 dev
->dma_mask
= NULL
;
2287 hcd
= usb_create_hcd(&isp1760_hc_driver
, dev
, dev_name(dev
));
2289 return ERR_PTR(-ENOMEM
);
2291 priv
= hcd_to_priv(hcd
);
2292 priv
->devflags
= devflags
;
2294 hcd
->regs
= ioremap(res_start
, res_len
);
2301 hcd
->rsrc_start
= res_start
;
2302 hcd
->rsrc_len
= res_len
;
2304 ret
= usb_add_hcd(hcd
, irq
, irqflags
);
2316 return ERR_PTR(ret
);
2319 MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP");
2320 MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>");
2321 MODULE_LICENSE("GPL v2");