Merge tag 'usb-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi...
[linux/fpc-iii.git] / drivers / ata / pata_at91.c
blobfd5b34f0d007d2ac5c16f231f346c1050a104b03
1 /*
2 * PATA driver for AT91SAM9260 Static Memory Controller
3 * with CompactFlash interface in True IDE mode
5 * Copyright (C) 2009 Matyukevich Sergey
6 * 2011 Igor Plyatov
8 * Based on:
9 * * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
10 * * pata_at32 driver by Kristoffer Nyborg Gregertsen
11 * * at91_ide driver by Stanislaw Gruszka
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License version 2
15 * as published by the Free Software Foundation.
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/blkdev.h>
22 #include <linux/gfp.h>
23 #include <scsi/scsi_host.h>
24 #include <linux/ata.h>
25 #include <linux/clk.h>
26 #include <linux/libata.h>
27 #include <linux/mfd/syscon.h>
28 #include <linux/mfd/syscon/atmel-smc.h>
29 #include <linux/platform_device.h>
30 #include <linux/ata_platform.h>
31 #include <linux/platform_data/atmel.h>
32 #include <linux/regmap.h>
33 #include <linux/gpio.h>
35 #define DRV_NAME "pata_at91"
36 #define DRV_VERSION "0.3"
38 #define CF_IDE_OFFSET 0x00c00000
39 #define CF_ALT_IDE_OFFSET 0x00e00000
40 #define CF_IDE_RES_SIZE 0x08
41 #define CS_PULSE_MAXIMUM 319
42 #define ER_SMC_CALC 1
43 #define ER_SMC_RECALC 2
45 struct at91_ide_info {
46 unsigned long mode;
47 unsigned int cs;
48 struct clk *mck;
49 void __iomem *ide_addr;
50 void __iomem *alt_addr;
53 /**
54 * struct smc_range - range of valid values for SMC register.
56 struct smc_range {
57 int min;
58 int max;
61 struct regmap *smc;
63 struct at91sam9_smc_generic_fields {
64 struct regmap_field *setup;
65 struct regmap_field *pulse;
66 struct regmap_field *cycle;
67 struct regmap_field *mode;
68 } fields;
70 /**
71 * adjust_smc_value - adjust value for one of SMC registers.
72 * @value: adjusted value
73 * @range: array of SMC ranges with valid values
74 * @size: SMC ranges array size
76 * This returns the difference between input and output value or negative
77 * in case of invalid input value.
78 * If negative returned, then output value = maximal possible from ranges.
80 static int adjust_smc_value(int *value, struct smc_range *range, int size)
82 int maximum = (range + size - 1)->max;
83 int remainder;
85 do {
86 if (*value < range->min) {
87 remainder = range->min - *value;
88 *value = range->min; /* nearest valid value */
89 return remainder;
90 } else if ((range->min <= *value) && (*value <= range->max))
91 return 0;
93 range++;
94 } while (--size);
95 *value = maximum;
97 return -1; /* invalid value */
101 * calc_smc_vals - calculate SMC register values
102 * @dev: ATA device
103 * @setup: SMC_SETUP register value
104 * @pulse: SMC_PULSE register value
105 * @cycle: SMC_CYCLE register value
107 * This returns negative in case of invalid values for SMC registers:
108 * -ER_SMC_RECALC - recalculation required for SMC values,
109 * -ER_SMC_CALC - calculation failed (invalid input values).
111 * SMC use special coding scheme, see "Coding and Range of Timing
112 * Parameters" table from AT91SAM9 datasheets.
114 * SMC_SETUP = 128*setup[5] + setup[4:0]
115 * SMC_PULSE = 256*pulse[6] + pulse[5:0]
116 * SMC_CYCLE = 256*cycle[8:7] + cycle[6:0]
118 static int calc_smc_vals(struct device *dev,
119 int *setup, int *pulse, int *cycle, int *cs_pulse)
121 int ret_val;
122 int err = 0;
123 struct smc_range range_setup[] = { /* SMC_SETUP valid values */
124 {.min = 0, .max = 31}, /* first range */
125 {.min = 128, .max = 159} /* second range */
127 struct smc_range range_pulse[] = { /* SMC_PULSE valid values */
128 {.min = 0, .max = 63}, /* first range */
129 {.min = 256, .max = 319} /* second range */
131 struct smc_range range_cycle[] = { /* SMC_CYCLE valid values */
132 {.min = 0, .max = 127}, /* first range */
133 {.min = 256, .max = 383}, /* second range */
134 {.min = 512, .max = 639}, /* third range */
135 {.min = 768, .max = 895} /* fourth range */
138 ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup));
139 if (ret_val < 0)
140 dev_warn(dev, "maximal SMC Setup value\n");
141 else
142 *cycle += ret_val;
144 ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse));
145 if (ret_val < 0)
146 dev_warn(dev, "maximal SMC Pulse value\n");
147 else
148 *cycle += ret_val;
150 ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle));
151 if (ret_val < 0)
152 dev_warn(dev, "maximal SMC Cycle value\n");
154 *cs_pulse = *cycle;
155 if (*cs_pulse > CS_PULSE_MAXIMUM) {
156 dev_err(dev, "unable to calculate valid SMC settings\n");
157 return -ER_SMC_CALC;
160 ret_val = adjust_smc_value(cs_pulse, range_pulse,
161 ARRAY_SIZE(range_pulse));
162 if (ret_val < 0) {
163 dev_warn(dev, "maximal SMC CS Pulse value\n");
164 } else if (ret_val != 0) {
165 *cycle = *cs_pulse;
166 dev_warn(dev, "SMC Cycle extended\n");
167 err = -ER_SMC_RECALC;
170 return err;
174 * to_smc_format - convert values into SMC format
175 * @setup: SETUP value of SMC Setup Register
176 * @pulse: PULSE value of SMC Pulse Register
177 * @cycle: CYCLE value of SMC Cycle Register
178 * @cs_pulse: NCS_PULSE value of SMC Pulse Register
180 static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse)
182 *setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2);
183 *pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2);
184 *cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1);
185 *cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2);
188 static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
190 unsigned long mul;
193 * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
194 * x * (f / 1_000_000_000) =
195 * x * ((f * 65536) / 1_000_000_000) / 65536 =
196 * x * (((f / 10_000) * 65536) / 100_000) / 65536 =
199 mul = (mck_hz / 10000) << 16;
200 mul /= 100000;
202 return (ns * mul + 65536) >> 16; /* rounding */
206 * set_smc_timing - SMC timings setup.
207 * @dev: device
208 * @info: AT91 IDE info
209 * @ata: ATA timings
211 * Its assumed that write timings are same as read timings,
212 * cs_setup = 0 and cs_pulse = cycle.
214 static void set_smc_timing(struct device *dev, struct ata_device *adev,
215 struct at91_ide_info *info, const struct ata_timing *ata)
217 int ret = 0;
218 int use_iordy;
219 unsigned int t6z; /* data tristate time in ns */
220 unsigned int cycle; /* SMC Cycle width in MCK ticks */
221 unsigned int setup; /* SMC Setup width in MCK ticks */
222 unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
223 unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
224 unsigned int tdf_cycles; /* SMC TDF MCK ticks */
225 unsigned long mck_hz; /* MCK frequency in Hz */
227 t6z = (ata->mode < XFER_PIO_5) ? 30 : 20;
228 mck_hz = clk_get_rate(info->mck);
229 cycle = calc_mck_cycles(ata->cyc8b, mck_hz);
230 setup = calc_mck_cycles(ata->setup, mck_hz);
231 pulse = calc_mck_cycles(ata->act8b, mck_hz);
232 tdf_cycles = calc_mck_cycles(t6z, mck_hz);
234 do {
235 ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse);
236 } while (ret == -ER_SMC_RECALC);
238 if (ret == -ER_SMC_CALC)
239 dev_err(dev, "Interface may not operate correctly\n");
241 dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n",
242 setup, pulse, cycle, cs_pulse);
243 to_smc_format(&setup, &pulse, &cycle, &cs_pulse);
244 /* disable or enable waiting for IORDY signal */
245 use_iordy = ata_pio_need_iordy(adev);
246 if (use_iordy)
247 info->mode |= AT91_SMC_EXNWMODE_READY;
249 if (tdf_cycles > 15) {
250 tdf_cycles = 15;
251 dev_warn(dev, "maximal SMC TDF Cycles value\n");
254 dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
256 regmap_fields_write(fields.setup, info->cs,
257 AT91SAM9_SMC_NRDSETUP(setup) |
258 AT91SAM9_SMC_NWESETUP(setup) |
259 AT91SAM9_SMC_NCS_NRDSETUP(0) |
260 AT91SAM9_SMC_NCS_WRSETUP(0));
261 regmap_fields_write(fields.pulse, info->cs,
262 AT91SAM9_SMC_NRDPULSE(pulse) |
263 AT91SAM9_SMC_NWEPULSE(pulse) |
264 AT91SAM9_SMC_NCS_NRDPULSE(cs_pulse) |
265 AT91SAM9_SMC_NCS_WRPULSE(cs_pulse));
266 regmap_fields_write(fields.cycle, info->cs,
267 AT91SAM9_SMC_NRDCYCLE(cycle) |
268 AT91SAM9_SMC_NWECYCLE(cycle));
269 regmap_fields_write(fields.mode, info->cs, info->mode |
270 AT91_SMC_TDF_(tdf_cycles));
273 static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
275 struct at91_ide_info *info = ap->host->private_data;
276 struct ata_timing timing;
277 int ret;
279 /* Compute ATA timing and set it to SMC */
280 ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
281 if (ret) {
282 dev_warn(ap->dev, "Failed to compute ATA timing %d, "
283 "set PIO_0 timing\n", ret);
284 timing = *ata_timing_find_mode(XFER_PIO_0);
286 set_smc_timing(ap->dev, adev, info, &timing);
289 static unsigned int pata_at91_data_xfer_noirq(struct ata_queued_cmd *qc,
290 unsigned char *buf, unsigned int buflen, int rw)
292 struct at91_ide_info *info = qc->dev->link->ap->host->private_data;
293 unsigned int consumed;
294 unsigned int mode;
295 unsigned long flags;
297 local_irq_save(flags);
298 regmap_fields_read(fields.mode, info->cs, &mode);
300 /* set 16bit mode before writing data */
301 regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
302 AT91_SMC_DBW_16);
304 consumed = ata_sff_data_xfer(qc, buf, buflen, rw);
306 /* restore 8bit mode after data is written */
307 regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
308 AT91_SMC_DBW_8);
310 local_irq_restore(flags);
311 return consumed;
314 static struct scsi_host_template pata_at91_sht = {
315 ATA_PIO_SHT(DRV_NAME),
318 static struct ata_port_operations pata_at91_port_ops = {
319 .inherits = &ata_sff_port_ops,
321 .sff_data_xfer = pata_at91_data_xfer_noirq,
322 .set_piomode = pata_at91_set_piomode,
323 .cable_detect = ata_cable_40wire,
326 static int at91sam9_smc_fields_init(struct device *dev)
328 struct reg_field field = REG_FIELD(0, 0, 31);
330 field.id_size = 8;
331 field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ;
333 field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC);
334 fields.setup = devm_regmap_field_alloc(dev, smc, field);
335 if (IS_ERR(fields.setup))
336 return PTR_ERR(fields.setup);
338 field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC);
339 fields.pulse = devm_regmap_field_alloc(dev, smc, field);
340 if (IS_ERR(fields.pulse))
341 return PTR_ERR(fields.pulse);
343 field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC);
344 fields.cycle = devm_regmap_field_alloc(dev, smc, field);
345 if (IS_ERR(fields.cycle))
346 return PTR_ERR(fields.cycle);
348 field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
349 fields.mode = devm_regmap_field_alloc(dev, smc, field);
351 return PTR_ERR_OR_ZERO(fields.mode);
354 static int pata_at91_probe(struct platform_device *pdev)
356 struct at91_cf_data *board = dev_get_platdata(&pdev->dev);
357 struct device *dev = &pdev->dev;
358 struct at91_ide_info *info;
359 struct resource *mem_res;
360 struct ata_host *host;
361 struct ata_port *ap;
363 int irq_flags = 0;
364 int irq = 0;
365 int ret;
367 /* get platform resources: IO/CTL memories and irq/rst pins */
369 if (pdev->num_resources != 1) {
370 dev_err(&pdev->dev, "invalid number of resources\n");
371 return -EINVAL;
374 mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
376 if (!mem_res) {
377 dev_err(dev, "failed to get mem resource\n");
378 return -EINVAL;
381 irq = board->irq_pin;
383 smc = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "atmel,smc");
384 if (IS_ERR(smc))
385 return PTR_ERR(smc);
387 ret = at91sam9_smc_fields_init(dev);
388 if (ret < 0)
389 return ret;
391 /* init ata host */
393 host = ata_host_alloc(dev, 1);
395 if (!host)
396 return -ENOMEM;
398 ap = host->ports[0];
399 ap->ops = &pata_at91_port_ops;
400 ap->flags |= ATA_FLAG_SLAVE_POSS;
401 ap->pio_mask = ATA_PIO4;
403 if (!gpio_is_valid(irq)) {
404 ap->flags |= ATA_FLAG_PIO_POLLING;
405 ata_port_desc(ap, "no IRQ, using PIO polling");
408 info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
410 if (!info) {
411 dev_err(dev, "failed to allocate memory for private data\n");
412 return -ENOMEM;
415 info->mck = clk_get(NULL, "mck");
417 if (IS_ERR(info->mck)) {
418 dev_err(dev, "failed to get access to mck clock\n");
419 return -ENODEV;
422 info->cs = board->chipselect;
423 info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
424 AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
425 AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
427 info->ide_addr = devm_ioremap(dev,
428 mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
430 if (!info->ide_addr) {
431 dev_err(dev, "failed to map IO base\n");
432 ret = -ENOMEM;
433 goto err_put;
436 info->alt_addr = devm_ioremap(dev,
437 mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
439 if (!info->alt_addr) {
440 dev_err(dev, "failed to map CTL base\n");
441 ret = -ENOMEM;
442 goto err_put;
445 ap->ioaddr.cmd_addr = info->ide_addr;
446 ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
447 ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
449 ata_sff_std_ports(&ap->ioaddr);
451 ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
452 (unsigned long long)mem_res->start + CF_IDE_OFFSET,
453 (unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
455 host->private_data = info;
457 ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
458 gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
459 irq_flags, &pata_at91_sht);
460 if (ret)
461 goto err_put;
463 return 0;
465 err_put:
466 clk_put(info->mck);
467 return ret;
470 static int pata_at91_remove(struct platform_device *pdev)
472 struct ata_host *host = platform_get_drvdata(pdev);
473 struct at91_ide_info *info;
475 if (!host)
476 return 0;
477 info = host->private_data;
479 ata_host_detach(host);
481 if (!info)
482 return 0;
484 clk_put(info->mck);
486 return 0;
489 static struct platform_driver pata_at91_driver = {
490 .probe = pata_at91_probe,
491 .remove = pata_at91_remove,
492 .driver = {
493 .name = DRV_NAME,
497 module_platform_driver(pata_at91_driver);
499 MODULE_LICENSE("GPL");
500 MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
501 MODULE_AUTHOR("Matyukevich Sergey");
502 MODULE_VERSION(DRV_VERSION);