2 * CPU frequency scaling for DaVinci
4 * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
6 * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
8 * Copyright (C) 2005 Nokia Corporation
9 * Written by Tony Lindgren <tony@atomide.com>
11 * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
13 * Copyright (C) 2007-2008 Texas Instruments, Inc.
14 * Updated to support OMAP3
15 * Rajendra Nayak <rnayak@ti.com>
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
21 #include <linux/types.h>
22 #include <linux/cpufreq.h>
23 #include <linux/init.h>
24 #include <linux/err.h>
25 #include <linux/clk.h>
26 #include <linux/platform_device.h>
27 #include <linux/export.h>
29 #include <mach/hardware.h>
30 #include <mach/cpufreq.h>
31 #include <mach/common.h>
35 struct davinci_cpufreq
{
39 unsigned long asyncrate
;
41 static struct davinci_cpufreq cpufreq
;
43 static int davinci_verify_speed(struct cpufreq_policy
*policy
)
45 struct davinci_cpufreq_config
*pdata
= cpufreq
.dev
->platform_data
;
46 struct cpufreq_frequency_table
*freq_table
= pdata
->freq_table
;
47 struct clk
*armclk
= cpufreq
.armclk
;
50 return cpufreq_frequency_table_verify(policy
, freq_table
);
55 cpufreq_verify_within_limits(policy
, policy
->cpuinfo
.min_freq
,
56 policy
->cpuinfo
.max_freq
);
58 policy
->min
= clk_round_rate(armclk
, policy
->min
* 1000) / 1000;
59 policy
->max
= clk_round_rate(armclk
, policy
->max
* 1000) / 1000;
60 cpufreq_verify_within_limits(policy
, policy
->cpuinfo
.min_freq
,
61 policy
->cpuinfo
.max_freq
);
65 static unsigned int davinci_getspeed(unsigned int cpu
)
70 return clk_get_rate(cpufreq
.armclk
) / 1000;
73 static int davinci_target(struct cpufreq_policy
*policy
,
74 unsigned int target_freq
, unsigned int relation
)
78 struct cpufreq_freqs freqs
;
79 struct davinci_cpufreq_config
*pdata
= cpufreq
.dev
->platform_data
;
80 struct clk
*armclk
= cpufreq
.armclk
;
83 * Ensure desired rate is within allowed range. Some govenors
84 * (ondemand) will just pass target_freq=0 to get the minimum.
86 if (target_freq
< policy
->cpuinfo
.min_freq
)
87 target_freq
= policy
->cpuinfo
.min_freq
;
88 if (target_freq
> policy
->cpuinfo
.max_freq
)
89 target_freq
= policy
->cpuinfo
.max_freq
;
91 freqs
.old
= davinci_getspeed(0);
92 freqs
.new = clk_round_rate(armclk
, target_freq
* 1000) / 1000;
95 if (freqs
.old
== freqs
.new)
98 dev_dbg(&cpufreq
.dev
, "transition: %u --> %u\n", freqs
.old
, freqs
.new);
100 ret
= cpufreq_frequency_table_target(policy
, pdata
->freq_table
,
101 freqs
.new, relation
, &idx
);
105 cpufreq_notify_transition(&freqs
, CPUFREQ_PRECHANGE
);
107 /* if moving to higher frequency, up the voltage beforehand */
108 if (pdata
->set_voltage
&& freqs
.new > freqs
.old
) {
109 ret
= pdata
->set_voltage(idx
);
114 ret
= clk_set_rate(armclk
, idx
);
118 if (cpufreq
.asyncclk
) {
119 ret
= clk_set_rate(cpufreq
.asyncclk
, cpufreq
.asyncrate
);
124 /* if moving to lower freq, lower the voltage after lowering freq */
125 if (pdata
->set_voltage
&& freqs
.new < freqs
.old
)
126 pdata
->set_voltage(idx
);
129 cpufreq_notify_transition(&freqs
, CPUFREQ_POSTCHANGE
);
134 static int davinci_cpu_init(struct cpufreq_policy
*policy
)
137 struct davinci_cpufreq_config
*pdata
= cpufreq
.dev
->platform_data
;
138 struct cpufreq_frequency_table
*freq_table
= pdata
->freq_table
;
140 if (policy
->cpu
!= 0)
143 /* Finish platform specific initialization */
145 result
= pdata
->init();
150 policy
->cur
= policy
->min
= policy
->max
= davinci_getspeed(0);
153 result
= cpufreq_frequency_table_cpuinfo(policy
, freq_table
);
155 cpufreq_frequency_table_get_attr(freq_table
,
158 policy
->cpuinfo
.min_freq
= policy
->min
;
159 policy
->cpuinfo
.max_freq
= policy
->max
;
162 policy
->min
= policy
->cpuinfo
.min_freq
;
163 policy
->max
= policy
->cpuinfo
.max_freq
;
164 policy
->cur
= davinci_getspeed(0);
167 * Time measurement across the target() function yields ~1500-1800us
168 * time taken with no drivers on notification list.
169 * Setting the latency to 2000 us to accommodate addition of drivers
170 * to pre/post change notification list.
172 policy
->cpuinfo
.transition_latency
= 2000 * 1000;
176 static int davinci_cpu_exit(struct cpufreq_policy
*policy
)
178 cpufreq_frequency_table_put_attr(policy
->cpu
);
182 static struct freq_attr
*davinci_cpufreq_attr
[] = {
183 &cpufreq_freq_attr_scaling_available_freqs
,
187 static struct cpufreq_driver davinci_driver
= {
188 .flags
= CPUFREQ_STICKY
,
189 .verify
= davinci_verify_speed
,
190 .target
= davinci_target
,
191 .get
= davinci_getspeed
,
192 .init
= davinci_cpu_init
,
193 .exit
= davinci_cpu_exit
,
195 .attr
= davinci_cpufreq_attr
,
198 static int __init
davinci_cpufreq_probe(struct platform_device
*pdev
)
200 struct davinci_cpufreq_config
*pdata
= pdev
->dev
.platform_data
;
201 struct clk
*asyncclk
;
205 if (!pdata
->freq_table
)
208 cpufreq
.dev
= &pdev
->dev
;
210 cpufreq
.armclk
= clk_get(NULL
, "arm");
211 if (IS_ERR(cpufreq
.armclk
)) {
212 dev_err(cpufreq
.dev
, "Unable to get ARM clock\n");
213 return PTR_ERR(cpufreq
.armclk
);
216 asyncclk
= clk_get(cpufreq
.dev
, "async");
217 if (!IS_ERR(asyncclk
)) {
218 cpufreq
.asyncclk
= asyncclk
;
219 cpufreq
.asyncrate
= clk_get_rate(asyncclk
);
222 return cpufreq_register_driver(&davinci_driver
);
225 static int __exit
davinci_cpufreq_remove(struct platform_device
*pdev
)
227 clk_put(cpufreq
.armclk
);
229 if (cpufreq
.asyncclk
)
230 clk_put(cpufreq
.asyncclk
);
232 return cpufreq_unregister_driver(&davinci_driver
);
235 static struct platform_driver davinci_cpufreq_driver
= {
237 .name
= "cpufreq-davinci",
238 .owner
= THIS_MODULE
,
240 .remove
= __exit_p(davinci_cpufreq_remove
),
243 static int __init
davinci_cpufreq_init(void)
245 return platform_driver_probe(&davinci_cpufreq_driver
,
246 davinci_cpufreq_probe
);
248 late_initcall(davinci_cpufreq_init
);