[media] wl128x: fix build errors when GPIOLIB is not enabled
[linux/fpc-iii.git] / arch / arm / mach-exynos / dma.c
blob9667c61e64fb8d0296ab5d10658e082b83b7153d
1 /* linux/arch/arm/mach-exynos4/dma.c
3 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
4 * http://www.samsung.com
6 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
7 * Jaswinder Singh <jassi.brar@samsung.com>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/dma-mapping.h>
25 #include <linux/amba/bus.h>
26 #include <linux/amba/pl330.h>
28 #include <asm/irq.h>
29 #include <plat/devs.h>
30 #include <plat/irqs.h>
32 #include <mach/map.h>
33 #include <mach/irqs.h>
34 #include <mach/dma.h>
36 static u64 dma_dmamask = DMA_BIT_MASK(32);
38 struct dma_pl330_peri pdma0_peri[28] = {
40 .peri_id = (u8)DMACH_PCM0_RX,
41 .rqtype = DEVTOMEM,
42 }, {
43 .peri_id = (u8)DMACH_PCM0_TX,
44 .rqtype = MEMTODEV,
45 }, {
46 .peri_id = (u8)DMACH_PCM2_RX,
47 .rqtype = DEVTOMEM,
48 }, {
49 .peri_id = (u8)DMACH_PCM2_TX,
50 .rqtype = MEMTODEV,
51 }, {
52 .peri_id = (u8)DMACH_MSM_REQ0,
53 }, {
54 .peri_id = (u8)DMACH_MSM_REQ2,
55 }, {
56 .peri_id = (u8)DMACH_SPI0_RX,
57 .rqtype = DEVTOMEM,
58 }, {
59 .peri_id = (u8)DMACH_SPI0_TX,
60 .rqtype = MEMTODEV,
61 }, {
62 .peri_id = (u8)DMACH_SPI2_RX,
63 .rqtype = DEVTOMEM,
64 }, {
65 .peri_id = (u8)DMACH_SPI2_TX,
66 .rqtype = MEMTODEV,
67 }, {
68 .peri_id = (u8)DMACH_I2S0S_TX,
69 .rqtype = MEMTODEV,
70 }, {
71 .peri_id = (u8)DMACH_I2S0_RX,
72 .rqtype = DEVTOMEM,
73 }, {
74 .peri_id = (u8)DMACH_I2S0_TX,
75 .rqtype = MEMTODEV,
76 }, {
77 .peri_id = (u8)DMACH_UART0_RX,
78 .rqtype = DEVTOMEM,
79 }, {
80 .peri_id = (u8)DMACH_UART0_TX,
81 .rqtype = MEMTODEV,
82 }, {
83 .peri_id = (u8)DMACH_UART2_RX,
84 .rqtype = DEVTOMEM,
85 }, {
86 .peri_id = (u8)DMACH_UART2_TX,
87 .rqtype = MEMTODEV,
88 }, {
89 .peri_id = (u8)DMACH_UART4_RX,
90 .rqtype = DEVTOMEM,
91 }, {
92 .peri_id = (u8)DMACH_UART4_TX,
93 .rqtype = MEMTODEV,
94 }, {
95 .peri_id = (u8)DMACH_SLIMBUS0_RX,
96 .rqtype = DEVTOMEM,
97 }, {
98 .peri_id = (u8)DMACH_SLIMBUS0_TX,
99 .rqtype = MEMTODEV,
100 }, {
101 .peri_id = (u8)DMACH_SLIMBUS2_RX,
102 .rqtype = DEVTOMEM,
103 }, {
104 .peri_id = (u8)DMACH_SLIMBUS2_TX,
105 .rqtype = MEMTODEV,
106 }, {
107 .peri_id = (u8)DMACH_SLIMBUS4_RX,
108 .rqtype = DEVTOMEM,
109 }, {
110 .peri_id = (u8)DMACH_SLIMBUS4_TX,
111 .rqtype = MEMTODEV,
112 }, {
113 .peri_id = (u8)DMACH_AC97_MICIN,
114 .rqtype = DEVTOMEM,
115 }, {
116 .peri_id = (u8)DMACH_AC97_PCMIN,
117 .rqtype = DEVTOMEM,
118 }, {
119 .peri_id = (u8)DMACH_AC97_PCMOUT,
120 .rqtype = MEMTODEV,
124 struct dma_pl330_platdata exynos4_pdma0_pdata = {
125 .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
126 .peri = pdma0_peri,
129 struct amba_device exynos4_device_pdma0 = {
130 .dev = {
131 .init_name = "dma-pl330.0",
132 .dma_mask = &dma_dmamask,
133 .coherent_dma_mask = DMA_BIT_MASK(32),
134 .platform_data = &exynos4_pdma0_pdata,
136 .res = {
137 .start = EXYNOS4_PA_PDMA0,
138 .end = EXYNOS4_PA_PDMA0 + SZ_4K,
139 .flags = IORESOURCE_MEM,
141 .irq = {IRQ_PDMA0, NO_IRQ},
142 .periphid = 0x00041330,
145 struct dma_pl330_peri pdma1_peri[25] = {
147 .peri_id = (u8)DMACH_PCM0_RX,
148 .rqtype = DEVTOMEM,
149 }, {
150 .peri_id = (u8)DMACH_PCM0_TX,
151 .rqtype = MEMTODEV,
152 }, {
153 .peri_id = (u8)DMACH_PCM1_RX,
154 .rqtype = DEVTOMEM,
155 }, {
156 .peri_id = (u8)DMACH_PCM1_TX,
157 .rqtype = MEMTODEV,
158 }, {
159 .peri_id = (u8)DMACH_MSM_REQ1,
160 }, {
161 .peri_id = (u8)DMACH_MSM_REQ3,
162 }, {
163 .peri_id = (u8)DMACH_SPI1_RX,
164 .rqtype = DEVTOMEM,
165 }, {
166 .peri_id = (u8)DMACH_SPI1_TX,
167 .rqtype = MEMTODEV,
168 }, {
169 .peri_id = (u8)DMACH_I2S0S_TX,
170 .rqtype = MEMTODEV,
171 }, {
172 .peri_id = (u8)DMACH_I2S0_RX,
173 .rqtype = DEVTOMEM,
174 }, {
175 .peri_id = (u8)DMACH_I2S0_TX,
176 .rqtype = MEMTODEV,
177 }, {
178 .peri_id = (u8)DMACH_I2S1_RX,
179 .rqtype = DEVTOMEM,
180 }, {
181 .peri_id = (u8)DMACH_I2S1_TX,
182 .rqtype = MEMTODEV,
183 }, {
184 .peri_id = (u8)DMACH_UART0_RX,
185 .rqtype = DEVTOMEM,
186 }, {
187 .peri_id = (u8)DMACH_UART0_TX,
188 .rqtype = MEMTODEV,
189 }, {
190 .peri_id = (u8)DMACH_UART1_RX,
191 .rqtype = DEVTOMEM,
192 }, {
193 .peri_id = (u8)DMACH_UART1_TX,
194 .rqtype = MEMTODEV,
195 }, {
196 .peri_id = (u8)DMACH_UART3_RX,
197 .rqtype = DEVTOMEM,
198 }, {
199 .peri_id = (u8)DMACH_UART3_TX,
200 .rqtype = MEMTODEV,
201 }, {
202 .peri_id = (u8)DMACH_SLIMBUS1_RX,
203 .rqtype = DEVTOMEM,
204 }, {
205 .peri_id = (u8)DMACH_SLIMBUS1_TX,
206 .rqtype = MEMTODEV,
207 }, {
208 .peri_id = (u8)DMACH_SLIMBUS3_RX,
209 .rqtype = DEVTOMEM,
210 }, {
211 .peri_id = (u8)DMACH_SLIMBUS3_TX,
212 .rqtype = MEMTODEV,
213 }, {
214 .peri_id = (u8)DMACH_SLIMBUS5_RX,
215 .rqtype = DEVTOMEM,
216 }, {
217 .peri_id = (u8)DMACH_SLIMBUS5_TX,
218 .rqtype = MEMTODEV,
222 struct dma_pl330_platdata exynos4_pdma1_pdata = {
223 .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
224 .peri = pdma1_peri,
227 struct amba_device exynos4_device_pdma1 = {
228 .dev = {
229 .init_name = "dma-pl330.1",
230 .dma_mask = &dma_dmamask,
231 .coherent_dma_mask = DMA_BIT_MASK(32),
232 .platform_data = &exynos4_pdma1_pdata,
234 .res = {
235 .start = EXYNOS4_PA_PDMA1,
236 .end = EXYNOS4_PA_PDMA1 + SZ_4K,
237 .flags = IORESOURCE_MEM,
239 .irq = {IRQ_PDMA1, NO_IRQ},
240 .periphid = 0x00041330,
243 static int __init exynos4_dma_init(void)
245 amba_device_register(&exynos4_device_pdma0, &iomem_resource);
246 amba_device_register(&exynos4_device_pdma1, &iomem_resource);
248 return 0;
250 arch_initcall(exynos4_dma_init);