dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / acpi / acpi_lpss.c
blob1e2a10a06b9dcec92accab9e1fd6e485cb19e052
1 /*
2 * ACPI support for Intel Lynxpoint LPSS.
4 * Copyright (C) 2013, Intel Corporation
5 * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
6 * Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/acpi.h>
14 #include <linux/clkdev.h>
15 #include <linux/clk-provider.h>
16 #include <linux/err.h>
17 #include <linux/io.h>
18 #include <linux/mutex.h>
19 #include <linux/pci.h>
20 #include <linux/platform_device.h>
21 #include <linux/platform_data/x86/clk-lpss.h>
22 #include <linux/platform_data/x86/pmc_atom.h>
23 #include <linux/pm_domain.h>
24 #include <linux/pm_runtime.h>
25 #include <linux/pwm.h>
26 #include <linux/suspend.h>
27 #include <linux/delay.h>
29 #include "internal.h"
31 ACPI_MODULE_NAME("acpi_lpss");
33 #ifdef CONFIG_X86_INTEL_LPSS
35 #include <asm/cpu_device_id.h>
36 #include <asm/intel-family.h>
37 #include <asm/iosf_mbi.h>
39 #define LPSS_ADDR(desc) ((unsigned long)&desc)
41 #define LPSS_CLK_SIZE 0x04
42 #define LPSS_LTR_SIZE 0x18
44 /* Offsets relative to LPSS_PRIVATE_OFFSET */
45 #define LPSS_CLK_DIVIDER_DEF_MASK (BIT(1) | BIT(16))
46 #define LPSS_RESETS 0x04
47 #define LPSS_RESETS_RESET_FUNC BIT(0)
48 #define LPSS_RESETS_RESET_APB BIT(1)
49 #define LPSS_GENERAL 0x08
50 #define LPSS_GENERAL_LTR_MODE_SW BIT(2)
51 #define LPSS_GENERAL_UART_RTS_OVRD BIT(3)
52 #define LPSS_SW_LTR 0x10
53 #define LPSS_AUTO_LTR 0x14
54 #define LPSS_LTR_SNOOP_REQ BIT(15)
55 #define LPSS_LTR_SNOOP_MASK 0x0000FFFF
56 #define LPSS_LTR_SNOOP_LAT_1US 0x800
57 #define LPSS_LTR_SNOOP_LAT_32US 0xC00
58 #define LPSS_LTR_SNOOP_LAT_SHIFT 5
59 #define LPSS_LTR_SNOOP_LAT_CUTOFF 3000
60 #define LPSS_LTR_MAX_VAL 0x3FF
61 #define LPSS_TX_INT 0x20
62 #define LPSS_TX_INT_MASK BIT(1)
64 #define LPSS_PRV_REG_COUNT 9
66 /* LPSS Flags */
67 #define LPSS_CLK BIT(0)
68 #define LPSS_CLK_GATE BIT(1)
69 #define LPSS_CLK_DIVIDER BIT(2)
70 #define LPSS_LTR BIT(3)
71 #define LPSS_SAVE_CTX BIT(4)
72 #define LPSS_NO_D3_DELAY BIT(5)
74 /* Crystal Cove PMIC shares same ACPI ID between different platforms */
75 #define BYT_CRC_HRV 2
76 #define CHT_CRC_HRV 3
78 struct lpss_private_data;
80 struct lpss_device_desc {
81 unsigned int flags;
82 const char *clk_con_id;
83 unsigned int prv_offset;
84 size_t prv_size_override;
85 struct property_entry *properties;
86 void (*setup)(struct lpss_private_data *pdata);
87 bool resume_from_noirq;
90 static const struct lpss_device_desc lpss_dma_desc = {
91 .flags = LPSS_CLK,
94 struct lpss_private_data {
95 struct acpi_device *adev;
96 void __iomem *mmio_base;
97 resource_size_t mmio_size;
98 unsigned int fixed_clk_rate;
99 struct clk *clk;
100 const struct lpss_device_desc *dev_desc;
101 u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
104 /* Devices which need to be in D3 before lpss_iosf_enter_d3_state() proceeds */
105 static u32 pmc_atom_d3_mask = 0xfe000ffe;
107 /* LPSS run time quirks */
108 static unsigned int lpss_quirks;
111 * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
113 * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
114 * it can be powered off automatically whenever the last LPSS device goes down.
115 * In case of no power any access to the DMA controller will hang the system.
116 * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
117 * well as on ASuS T100TA transformer.
119 * This quirk overrides power state of entire LPSS island to keep DMA powered
120 * on whenever we have at least one other device in use.
122 #define LPSS_QUIRK_ALWAYS_POWER_ON BIT(0)
124 /* UART Component Parameter Register */
125 #define LPSS_UART_CPR 0xF4
126 #define LPSS_UART_CPR_AFCE BIT(4)
128 static void lpss_uart_setup(struct lpss_private_data *pdata)
130 unsigned int offset;
131 u32 val;
133 offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
134 val = readl(pdata->mmio_base + offset);
135 writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
137 val = readl(pdata->mmio_base + LPSS_UART_CPR);
138 if (!(val & LPSS_UART_CPR_AFCE)) {
139 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
140 val = readl(pdata->mmio_base + offset);
141 val |= LPSS_GENERAL_UART_RTS_OVRD;
142 writel(val, pdata->mmio_base + offset);
146 static void lpss_deassert_reset(struct lpss_private_data *pdata)
148 unsigned int offset;
149 u32 val;
151 offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
152 val = readl(pdata->mmio_base + offset);
153 val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
154 writel(val, pdata->mmio_base + offset);
158 * BYT PWM used for backlight control by the i915 driver on systems without
159 * the Crystal Cove PMIC.
161 static struct pwm_lookup byt_pwm_lookup[] = {
162 PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
163 "pwm_backlight", 0, PWM_POLARITY_NORMAL,
164 "pwm-lpss-platform"),
167 static void byt_pwm_setup(struct lpss_private_data *pdata)
169 struct acpi_device *adev = pdata->adev;
171 /* Only call pwm_add_table for the first PWM controller */
172 if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
173 return;
175 if (!acpi_dev_present("INT33FD", NULL, BYT_CRC_HRV))
176 pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
179 #define LPSS_I2C_ENABLE 0x6c
181 static void byt_i2c_setup(struct lpss_private_data *pdata)
183 const char *uid_str = acpi_device_uid(pdata->adev);
184 acpi_handle handle = pdata->adev->handle;
185 unsigned long long shared_host = 0;
186 acpi_status status;
187 long uid = 0;
189 /* Expected to always be true, but better safe then sorry */
190 if (uid_str)
191 uid = simple_strtol(uid_str, NULL, 10);
193 /* Detect I2C bus shared with PUNIT and ignore its d3 status */
194 status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
195 if (ACPI_SUCCESS(status) && shared_host && uid)
196 pmc_atom_d3_mask &= ~(BIT_LPSS2_F1_I2C1 << (uid - 1));
198 lpss_deassert_reset(pdata);
200 if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
201 pdata->fixed_clk_rate = 133000000;
203 writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
206 /* BSW PWM used for backlight control by the i915 driver */
207 static struct pwm_lookup bsw_pwm_lookup[] = {
208 PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
209 "pwm_backlight", 0, PWM_POLARITY_NORMAL,
210 "pwm-lpss-platform"),
213 static void bsw_pwm_setup(struct lpss_private_data *pdata)
215 struct acpi_device *adev = pdata->adev;
217 /* Only call pwm_add_table for the first PWM controller */
218 if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
219 return;
221 pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
224 static const struct lpss_device_desc lpt_dev_desc = {
225 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
226 .prv_offset = 0x800,
229 static const struct lpss_device_desc lpt_i2c_dev_desc = {
230 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR,
231 .prv_offset = 0x800,
234 static struct property_entry uart_properties[] = {
235 PROPERTY_ENTRY_U32("reg-io-width", 4),
236 PROPERTY_ENTRY_U32("reg-shift", 2),
237 PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
238 { },
241 static const struct lpss_device_desc lpt_uart_dev_desc = {
242 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
243 .clk_con_id = "baudclk",
244 .prv_offset = 0x800,
245 .setup = lpss_uart_setup,
246 .properties = uart_properties,
249 static const struct lpss_device_desc lpt_sdio_dev_desc = {
250 .flags = LPSS_LTR,
251 .prv_offset = 0x1000,
252 .prv_size_override = 0x1018,
255 static const struct lpss_device_desc byt_pwm_dev_desc = {
256 .flags = LPSS_SAVE_CTX,
257 .prv_offset = 0x800,
258 .setup = byt_pwm_setup,
261 static const struct lpss_device_desc bsw_pwm_dev_desc = {
262 .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
263 .prv_offset = 0x800,
264 .setup = bsw_pwm_setup,
267 static const struct lpss_device_desc byt_uart_dev_desc = {
268 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
269 .clk_con_id = "baudclk",
270 .prv_offset = 0x800,
271 .setup = lpss_uart_setup,
272 .properties = uart_properties,
275 static const struct lpss_device_desc bsw_uart_dev_desc = {
276 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
277 | LPSS_NO_D3_DELAY,
278 .clk_con_id = "baudclk",
279 .prv_offset = 0x800,
280 .setup = lpss_uart_setup,
281 .properties = uart_properties,
284 static const struct lpss_device_desc byt_spi_dev_desc = {
285 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
286 .prv_offset = 0x400,
289 static const struct lpss_device_desc byt_sdio_dev_desc = {
290 .flags = LPSS_CLK,
293 static const struct lpss_device_desc byt_i2c_dev_desc = {
294 .flags = LPSS_CLK | LPSS_SAVE_CTX,
295 .prv_offset = 0x800,
296 .setup = byt_i2c_setup,
297 .resume_from_noirq = true,
300 static const struct lpss_device_desc bsw_i2c_dev_desc = {
301 .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
302 .prv_offset = 0x800,
303 .setup = byt_i2c_setup,
304 .resume_from_noirq = true,
307 static const struct lpss_device_desc bsw_spi_dev_desc = {
308 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
309 | LPSS_NO_D3_DELAY,
310 .prv_offset = 0x400,
311 .setup = lpss_deassert_reset,
314 #define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
316 static const struct x86_cpu_id lpss_cpu_ids[] = {
317 ICPU(INTEL_FAM6_ATOM_SILVERMONT), /* Valleyview, Bay Trail */
318 ICPU(INTEL_FAM6_ATOM_AIRMONT), /* Braswell, Cherry Trail */
322 #else
324 #define LPSS_ADDR(desc) (0UL)
326 #endif /* CONFIG_X86_INTEL_LPSS */
328 static const struct acpi_device_id acpi_lpss_device_ids[] = {
329 /* Generic LPSS devices */
330 { "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
332 /* Lynxpoint LPSS devices */
333 { "INT33C0", LPSS_ADDR(lpt_dev_desc) },
334 { "INT33C1", LPSS_ADDR(lpt_dev_desc) },
335 { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
336 { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
337 { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
338 { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
339 { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
340 { "INT33C7", },
342 /* BayTrail LPSS devices */
343 { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
344 { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
345 { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
346 { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
347 { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
348 { "INT33B2", },
349 { "INT33FC", },
351 /* Braswell LPSS devices */
352 { "80862286", LPSS_ADDR(lpss_dma_desc) },
353 { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
354 { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
355 { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
356 { "808622C0", LPSS_ADDR(lpss_dma_desc) },
357 { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
359 /* Broadwell LPSS devices */
360 { "INT3430", LPSS_ADDR(lpt_dev_desc) },
361 { "INT3431", LPSS_ADDR(lpt_dev_desc) },
362 { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
363 { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
364 { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
365 { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
366 { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
367 { "INT3437", },
369 /* Wildcat Point LPSS devices */
370 { "INT3438", LPSS_ADDR(lpt_dev_desc) },
375 #ifdef CONFIG_X86_INTEL_LPSS
377 static int is_memory(struct acpi_resource *res, void *not_used)
379 struct resource r;
380 return !acpi_dev_resource_memory(res, &r);
383 /* LPSS main clock device. */
384 static struct platform_device *lpss_clk_dev;
386 static inline void lpt_register_clock_device(void)
388 lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
391 static int register_device_clock(struct acpi_device *adev,
392 struct lpss_private_data *pdata)
394 const struct lpss_device_desc *dev_desc = pdata->dev_desc;
395 const char *devname = dev_name(&adev->dev);
396 struct clk *clk;
397 struct lpss_clk_data *clk_data;
398 const char *parent, *clk_name;
399 void __iomem *prv_base;
401 if (!lpss_clk_dev)
402 lpt_register_clock_device();
404 clk_data = platform_get_drvdata(lpss_clk_dev);
405 if (!clk_data)
406 return -ENODEV;
407 clk = clk_data->clk;
409 if (!pdata->mmio_base
410 || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
411 return -ENODATA;
413 parent = clk_data->name;
414 prv_base = pdata->mmio_base + dev_desc->prv_offset;
416 if (pdata->fixed_clk_rate) {
417 clk = clk_register_fixed_rate(NULL, devname, parent, 0,
418 pdata->fixed_clk_rate);
419 goto out;
422 if (dev_desc->flags & LPSS_CLK_GATE) {
423 clk = clk_register_gate(NULL, devname, parent, 0,
424 prv_base, 0, 0, NULL);
425 parent = devname;
428 if (dev_desc->flags & LPSS_CLK_DIVIDER) {
429 /* Prevent division by zero */
430 if (!readl(prv_base))
431 writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
433 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
434 if (!clk_name)
435 return -ENOMEM;
436 clk = clk_register_fractional_divider(NULL, clk_name, parent,
437 0, prv_base,
438 1, 15, 16, 15, 0, NULL);
439 parent = clk_name;
441 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
442 if (!clk_name) {
443 kfree(parent);
444 return -ENOMEM;
446 clk = clk_register_gate(NULL, clk_name, parent,
447 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
448 prv_base, 31, 0, NULL);
449 kfree(parent);
450 kfree(clk_name);
452 out:
453 if (IS_ERR(clk))
454 return PTR_ERR(clk);
456 pdata->clk = clk;
457 clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
458 return 0;
461 struct lpss_device_links {
462 const char *supplier_hid;
463 const char *supplier_uid;
464 const char *consumer_hid;
465 const char *consumer_uid;
466 u32 flags;
470 * The _DEP method is used to identify dependencies but instead of creating
471 * device links for every handle in _DEP, only links in the following list are
472 * created. That is necessary because, in the general case, _DEP can refer to
473 * devices that might not have drivers, or that are on different buses, or where
474 * the supplier is not enumerated until after the consumer is probed.
476 static const struct lpss_device_links lpss_device_links[] = {
477 {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
478 {"808622C1", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
479 {"80860F41", "5", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
482 static bool hid_uid_match(struct acpi_device *adev,
483 const char *hid2, const char *uid2)
485 const char *hid1 = acpi_device_hid(adev);
486 const char *uid1 = acpi_device_uid(adev);
488 if (strcmp(hid1, hid2))
489 return false;
491 if (!uid2)
492 return true;
494 return uid1 && !strcmp(uid1, uid2);
497 static bool acpi_lpss_is_supplier(struct acpi_device *adev,
498 const struct lpss_device_links *link)
500 return hid_uid_match(adev, link->supplier_hid, link->supplier_uid);
503 static bool acpi_lpss_is_consumer(struct acpi_device *adev,
504 const struct lpss_device_links *link)
506 return hid_uid_match(adev, link->consumer_hid, link->consumer_uid);
509 struct hid_uid {
510 const char *hid;
511 const char *uid;
514 static int match_hid_uid(struct device *dev, void *data)
516 struct acpi_device *adev = ACPI_COMPANION(dev);
517 struct hid_uid *id = data;
519 if (!adev)
520 return 0;
522 return hid_uid_match(adev, id->hid, id->uid);
525 static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
527 struct device *dev;
529 struct hid_uid data = {
530 .hid = hid,
531 .uid = uid,
534 dev = bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
535 if (dev)
536 return dev;
538 return bus_find_device(&pci_bus_type, NULL, &data, match_hid_uid);
541 static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle)
543 struct acpi_handle_list dep_devices;
544 acpi_status status;
545 int i;
547 if (!acpi_has_method(adev->handle, "_DEP"))
548 return false;
550 status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
551 &dep_devices);
552 if (ACPI_FAILURE(status)) {
553 dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n");
554 return false;
557 for (i = 0; i < dep_devices.count; i++) {
558 if (dep_devices.handles[i] == handle)
559 return true;
562 return false;
565 static void acpi_lpss_link_consumer(struct device *dev1,
566 const struct lpss_device_links *link)
568 struct device *dev2;
570 dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
571 if (!dev2)
572 return;
574 if (acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
575 device_link_add(dev2, dev1, link->flags);
577 put_device(dev2);
580 static void acpi_lpss_link_supplier(struct device *dev1,
581 const struct lpss_device_links *link)
583 struct device *dev2;
585 dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
586 if (!dev2)
587 return;
589 if (acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
590 device_link_add(dev1, dev2, link->flags);
592 put_device(dev2);
595 static void acpi_lpss_create_device_links(struct acpi_device *adev,
596 struct platform_device *pdev)
598 int i;
600 for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
601 const struct lpss_device_links *link = &lpss_device_links[i];
603 if (acpi_lpss_is_supplier(adev, link))
604 acpi_lpss_link_consumer(&pdev->dev, link);
606 if (acpi_lpss_is_consumer(adev, link))
607 acpi_lpss_link_supplier(&pdev->dev, link);
611 static int acpi_lpss_create_device(struct acpi_device *adev,
612 const struct acpi_device_id *id)
614 const struct lpss_device_desc *dev_desc;
615 struct lpss_private_data *pdata;
616 struct resource_entry *rentry;
617 struct list_head resource_list;
618 struct platform_device *pdev;
619 int ret;
621 dev_desc = (const struct lpss_device_desc *)id->driver_data;
622 if (!dev_desc) {
623 pdev = acpi_create_platform_device(adev, NULL);
624 return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
626 pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
627 if (!pdata)
628 return -ENOMEM;
630 INIT_LIST_HEAD(&resource_list);
631 ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
632 if (ret < 0)
633 goto err_out;
635 list_for_each_entry(rentry, &resource_list, node)
636 if (resource_type(rentry->res) == IORESOURCE_MEM) {
637 if (dev_desc->prv_size_override)
638 pdata->mmio_size = dev_desc->prv_size_override;
639 else
640 pdata->mmio_size = resource_size(rentry->res);
641 pdata->mmio_base = ioremap(rentry->res->start,
642 pdata->mmio_size);
643 break;
646 acpi_dev_free_resource_list(&resource_list);
648 if (!pdata->mmio_base) {
649 /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
650 adev->pnp.type.platform_id = 0;
651 /* Skip the device, but continue the namespace scan. */
652 ret = 0;
653 goto err_out;
656 pdata->adev = adev;
657 pdata->dev_desc = dev_desc;
659 if (dev_desc->setup)
660 dev_desc->setup(pdata);
662 if (dev_desc->flags & LPSS_CLK) {
663 ret = register_device_clock(adev, pdata);
664 if (ret) {
665 /* Skip the device, but continue the namespace scan. */
666 ret = 0;
667 goto err_out;
672 * This works around a known issue in ACPI tables where LPSS devices
673 * have _PS0 and _PS3 without _PSC (and no power resources), so
674 * acpi_bus_init_power() will assume that the BIOS has put them into D0.
676 acpi_device_fix_up_power(adev);
678 adev->driver_data = pdata;
679 pdev = acpi_create_platform_device(adev, dev_desc->properties);
680 if (!IS_ERR_OR_NULL(pdev)) {
681 acpi_lpss_create_device_links(adev, pdev);
682 return 1;
685 ret = PTR_ERR(pdev);
686 adev->driver_data = NULL;
688 err_out:
689 kfree(pdata);
690 return ret;
693 static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
695 return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
698 static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
699 unsigned int reg)
701 writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
704 static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
706 struct acpi_device *adev;
707 struct lpss_private_data *pdata;
708 unsigned long flags;
709 int ret;
711 ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
712 if (WARN_ON(ret))
713 return ret;
715 spin_lock_irqsave(&dev->power.lock, flags);
716 if (pm_runtime_suspended(dev)) {
717 ret = -EAGAIN;
718 goto out;
720 pdata = acpi_driver_data(adev);
721 if (WARN_ON(!pdata || !pdata->mmio_base)) {
722 ret = -ENODEV;
723 goto out;
725 *val = __lpss_reg_read(pdata, reg);
727 out:
728 spin_unlock_irqrestore(&dev->power.lock, flags);
729 return ret;
732 static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
733 char *buf)
735 u32 ltr_value = 0;
736 unsigned int reg;
737 int ret;
739 reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
740 ret = lpss_reg_read(dev, reg, &ltr_value);
741 if (ret)
742 return ret;
744 return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
747 static ssize_t lpss_ltr_mode_show(struct device *dev,
748 struct device_attribute *attr, char *buf)
750 u32 ltr_mode = 0;
751 char *outstr;
752 int ret;
754 ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
755 if (ret)
756 return ret;
758 outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
759 return sprintf(buf, "%s\n", outstr);
762 static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
763 static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
764 static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
766 static struct attribute *lpss_attrs[] = {
767 &dev_attr_auto_ltr.attr,
768 &dev_attr_sw_ltr.attr,
769 &dev_attr_ltr_mode.attr,
770 NULL,
773 static const struct attribute_group lpss_attr_group = {
774 .attrs = lpss_attrs,
775 .name = "lpss_ltr",
778 static void acpi_lpss_set_ltr(struct device *dev, s32 val)
780 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
781 u32 ltr_mode, ltr_val;
783 ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
784 if (val < 0) {
785 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
786 ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
787 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
789 return;
791 ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
792 if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
793 ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
794 val = LPSS_LTR_MAX_VAL;
795 } else if (val > LPSS_LTR_MAX_VAL) {
796 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
797 val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
798 } else {
799 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
801 ltr_val |= val;
802 __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
803 if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
804 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
805 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
809 #ifdef CONFIG_PM
811 * acpi_lpss_save_ctx() - Save the private registers of LPSS device
812 * @dev: LPSS device
813 * @pdata: pointer to the private data of the LPSS device
815 * Most LPSS devices have private registers which may loose their context when
816 * the device is powered down. acpi_lpss_save_ctx() saves those registers into
817 * prv_reg_ctx array.
819 static void acpi_lpss_save_ctx(struct device *dev,
820 struct lpss_private_data *pdata)
822 unsigned int i;
824 for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
825 unsigned long offset = i * sizeof(u32);
827 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
828 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
829 pdata->prv_reg_ctx[i], offset);
834 * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
835 * @dev: LPSS device
836 * @pdata: pointer to the private data of the LPSS device
838 * Restores the registers that were previously stored with acpi_lpss_save_ctx().
840 static void acpi_lpss_restore_ctx(struct device *dev,
841 struct lpss_private_data *pdata)
843 unsigned int i;
845 for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
846 unsigned long offset = i * sizeof(u32);
848 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
849 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
850 pdata->prv_reg_ctx[i], offset);
854 static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
857 * The following delay is needed or the subsequent write operations may
858 * fail. The LPSS devices are actually PCI devices and the PCI spec
859 * expects 10ms delay before the device can be accessed after D3 to D0
860 * transition. However some platforms like BSW does not need this delay.
862 unsigned int delay = 10; /* default 10ms delay */
864 if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
865 delay = 0;
867 msleep(delay);
870 static int acpi_lpss_activate(struct device *dev)
872 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
873 int ret;
875 ret = acpi_dev_resume(dev);
876 if (ret)
877 return ret;
879 acpi_lpss_d3_to_d0_delay(pdata);
882 * This is called only on ->probe() stage where a device is either in
883 * known state defined by BIOS or most likely powered off. Due to this
884 * we have to deassert reset line to be sure that ->probe() will
885 * recognize the device.
887 if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
888 lpss_deassert_reset(pdata);
890 return 0;
893 static void acpi_lpss_dismiss(struct device *dev)
895 acpi_dev_suspend(dev, false);
898 /* IOSF SB for LPSS island */
899 #define LPSS_IOSF_UNIT_LPIOEP 0xA0
900 #define LPSS_IOSF_UNIT_LPIO1 0xAB
901 #define LPSS_IOSF_UNIT_LPIO2 0xAC
903 #define LPSS_IOSF_PMCSR 0x84
904 #define LPSS_PMCSR_D0 0
905 #define LPSS_PMCSR_D3hot 3
906 #define LPSS_PMCSR_Dx_MASK GENMASK(1, 0)
908 #define LPSS_IOSF_GPIODEF0 0x154
909 #define LPSS_GPIODEF0_DMA1_D3 BIT(2)
910 #define LPSS_GPIODEF0_DMA2_D3 BIT(3)
911 #define LPSS_GPIODEF0_DMA_D3_MASK GENMASK(3, 2)
912 #define LPSS_GPIODEF0_DMA_LLP BIT(13)
914 static DEFINE_MUTEX(lpss_iosf_mutex);
915 static bool lpss_iosf_d3_entered = true;
917 static void lpss_iosf_enter_d3_state(void)
919 u32 value1 = 0;
920 u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
921 u32 value2 = LPSS_PMCSR_D3hot;
922 u32 mask2 = LPSS_PMCSR_Dx_MASK;
924 * PMC provides an information about actual status of the LPSS devices.
925 * Here we read the values related to LPSS power island, i.e. LPSS
926 * devices, excluding both LPSS DMA controllers, along with SCC domain.
928 u32 func_dis, d3_sts_0, pmc_status;
929 int ret;
931 ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
932 if (ret)
933 return;
935 mutex_lock(&lpss_iosf_mutex);
937 ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
938 if (ret)
939 goto exit;
942 * Get the status of entire LPSS power island per device basis.
943 * Shutdown both LPSS DMA controllers if and only if all other devices
944 * are already in D3hot.
946 pmc_status = (~(d3_sts_0 | func_dis)) & pmc_atom_d3_mask;
947 if (pmc_status)
948 goto exit;
950 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
951 LPSS_IOSF_PMCSR, value2, mask2);
953 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
954 LPSS_IOSF_PMCSR, value2, mask2);
956 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
957 LPSS_IOSF_GPIODEF0, value1, mask1);
959 lpss_iosf_d3_entered = true;
961 exit:
962 mutex_unlock(&lpss_iosf_mutex);
965 static void lpss_iosf_exit_d3_state(void)
967 u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
968 LPSS_GPIODEF0_DMA_LLP;
969 u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
970 u32 value2 = LPSS_PMCSR_D0;
971 u32 mask2 = LPSS_PMCSR_Dx_MASK;
973 mutex_lock(&lpss_iosf_mutex);
975 if (!lpss_iosf_d3_entered)
976 goto exit;
978 lpss_iosf_d3_entered = false;
980 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
981 LPSS_IOSF_GPIODEF0, value1, mask1);
983 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
984 LPSS_IOSF_PMCSR, value2, mask2);
986 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
987 LPSS_IOSF_PMCSR, value2, mask2);
989 exit:
990 mutex_unlock(&lpss_iosf_mutex);
993 static int acpi_lpss_suspend(struct device *dev, bool wakeup)
995 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
996 int ret;
998 if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
999 acpi_lpss_save_ctx(dev, pdata);
1001 ret = acpi_dev_suspend(dev, wakeup);
1004 * This call must be last in the sequence, otherwise PMC will return
1005 * wrong status for devices being about to be powered off. See
1006 * lpss_iosf_enter_d3_state() for further information.
1008 if (acpi_target_system_state() == ACPI_STATE_S0 &&
1009 lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1010 lpss_iosf_enter_d3_state();
1012 return ret;
1015 static int acpi_lpss_resume(struct device *dev)
1017 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1018 int ret;
1021 * This call is kept first to be in symmetry with
1022 * acpi_lpss_runtime_suspend() one.
1024 if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1025 lpss_iosf_exit_d3_state();
1027 ret = acpi_dev_resume(dev);
1028 if (ret)
1029 return ret;
1031 acpi_lpss_d3_to_d0_delay(pdata);
1033 if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
1034 acpi_lpss_restore_ctx(dev, pdata);
1036 return 0;
1039 #ifdef CONFIG_PM_SLEEP
1040 static int acpi_lpss_do_suspend_late(struct device *dev)
1042 int ret;
1044 if (dev_pm_smart_suspend_and_suspended(dev))
1045 return 0;
1047 ret = pm_generic_suspend_late(dev);
1048 return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1051 static int acpi_lpss_suspend_late(struct device *dev)
1053 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1055 if (pdata->dev_desc->resume_from_noirq)
1056 return 0;
1058 return acpi_lpss_do_suspend_late(dev);
1061 static int acpi_lpss_suspend_noirq(struct device *dev)
1063 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1064 int ret;
1066 if (pdata->dev_desc->resume_from_noirq) {
1067 ret = acpi_lpss_do_suspend_late(dev);
1068 if (ret)
1069 return ret;
1072 return acpi_subsys_suspend_noirq(dev);
1075 static int acpi_lpss_do_resume_early(struct device *dev)
1077 int ret = acpi_lpss_resume(dev);
1079 return ret ? ret : pm_generic_resume_early(dev);
1082 static int acpi_lpss_resume_early(struct device *dev)
1084 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1086 if (pdata->dev_desc->resume_from_noirq)
1087 return 0;
1089 return acpi_lpss_do_resume_early(dev);
1092 static int acpi_lpss_resume_noirq(struct device *dev)
1094 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1095 int ret;
1097 ret = acpi_subsys_resume_noirq(dev);
1098 if (ret)
1099 return ret;
1101 if (!dev_pm_may_skip_resume(dev) && pdata->dev_desc->resume_from_noirq)
1102 ret = acpi_lpss_do_resume_early(dev);
1104 return ret;
1107 #endif /* CONFIG_PM_SLEEP */
1109 static int acpi_lpss_runtime_suspend(struct device *dev)
1111 int ret = pm_generic_runtime_suspend(dev);
1113 return ret ? ret : acpi_lpss_suspend(dev, true);
1116 static int acpi_lpss_runtime_resume(struct device *dev)
1118 int ret = acpi_lpss_resume(dev);
1120 return ret ? ret : pm_generic_runtime_resume(dev);
1122 #endif /* CONFIG_PM */
1124 static struct dev_pm_domain acpi_lpss_pm_domain = {
1125 #ifdef CONFIG_PM
1126 .activate = acpi_lpss_activate,
1127 .dismiss = acpi_lpss_dismiss,
1128 #endif
1129 .ops = {
1130 #ifdef CONFIG_PM
1131 #ifdef CONFIG_PM_SLEEP
1132 .prepare = acpi_subsys_prepare,
1133 .complete = acpi_subsys_complete,
1134 .suspend = acpi_subsys_suspend,
1135 .suspend_late = acpi_lpss_suspend_late,
1136 .suspend_noirq = acpi_lpss_suspend_noirq,
1137 .resume_noirq = acpi_lpss_resume_noirq,
1138 .resume_early = acpi_lpss_resume_early,
1139 .freeze = acpi_subsys_freeze,
1140 .freeze_late = acpi_subsys_freeze_late,
1141 .freeze_noirq = acpi_subsys_freeze_noirq,
1142 .thaw_noirq = acpi_subsys_thaw_noirq,
1143 .poweroff = acpi_subsys_suspend,
1144 .poweroff_late = acpi_lpss_suspend_late,
1145 .poweroff_noirq = acpi_subsys_suspend_noirq,
1146 .restore_noirq = acpi_subsys_resume_noirq,
1147 .restore_early = acpi_lpss_resume_early,
1148 #endif
1149 .runtime_suspend = acpi_lpss_runtime_suspend,
1150 .runtime_resume = acpi_lpss_runtime_resume,
1151 #endif
1155 static int acpi_lpss_platform_notify(struct notifier_block *nb,
1156 unsigned long action, void *data)
1158 struct platform_device *pdev = to_platform_device(data);
1159 struct lpss_private_data *pdata;
1160 struct acpi_device *adev;
1161 const struct acpi_device_id *id;
1163 id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
1164 if (!id || !id->driver_data)
1165 return 0;
1167 if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
1168 return 0;
1170 pdata = acpi_driver_data(adev);
1171 if (!pdata)
1172 return 0;
1174 if (pdata->mmio_base &&
1175 pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
1176 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
1177 return 0;
1180 switch (action) {
1181 case BUS_NOTIFY_BIND_DRIVER:
1182 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1183 break;
1184 case BUS_NOTIFY_DRIVER_NOT_BOUND:
1185 case BUS_NOTIFY_UNBOUND_DRIVER:
1186 dev_pm_domain_set(&pdev->dev, NULL);
1187 break;
1188 case BUS_NOTIFY_ADD_DEVICE:
1189 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1190 if (pdata->dev_desc->flags & LPSS_LTR)
1191 return sysfs_create_group(&pdev->dev.kobj,
1192 &lpss_attr_group);
1193 break;
1194 case BUS_NOTIFY_DEL_DEVICE:
1195 if (pdata->dev_desc->flags & LPSS_LTR)
1196 sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
1197 dev_pm_domain_set(&pdev->dev, NULL);
1198 break;
1199 default:
1200 break;
1203 return 0;
1206 static struct notifier_block acpi_lpss_nb = {
1207 .notifier_call = acpi_lpss_platform_notify,
1210 static void acpi_lpss_bind(struct device *dev)
1212 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1214 if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
1215 return;
1217 if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
1218 dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
1219 else
1220 dev_err(dev, "MMIO size insufficient to access LTR\n");
1223 static void acpi_lpss_unbind(struct device *dev)
1225 dev->power.set_latency_tolerance = NULL;
1228 static struct acpi_scan_handler lpss_handler = {
1229 .ids = acpi_lpss_device_ids,
1230 .attach = acpi_lpss_create_device,
1231 .bind = acpi_lpss_bind,
1232 .unbind = acpi_lpss_unbind,
1235 void __init acpi_lpss_init(void)
1237 const struct x86_cpu_id *id;
1238 int ret;
1240 ret = lpt_clk_init();
1241 if (ret)
1242 return;
1244 id = x86_match_cpu(lpss_cpu_ids);
1245 if (id)
1246 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
1248 bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
1249 acpi_scan_add_handler(&lpss_handler);
1252 #else
1254 static struct acpi_scan_handler lpss_handler = {
1255 .ids = acpi_lpss_device_ids,
1258 void __init acpi_lpss_init(void)
1260 acpi_scan_add_handler(&lpss_handler);
1263 #endif /* CONFIG_X86_INTEL_LPSS */