dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / acpi / cppc_acpi.c
blob1b207fca1420bbc5c40469e1b3558cb38a57c450
1 /*
2 * CPPC (Collaborative Processor Performance Control) methods used by CPUfreq drivers.
4 * (C) Copyright 2014, 2015 Linaro Ltd.
5 * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; version 2
10 * of the License.
12 * CPPC describes a few methods for controlling CPU performance using
13 * information from a per CPU table called CPC. This table is described in
14 * the ACPI v5.0+ specification. The table consists of a list of
15 * registers which may be memory mapped or hardware registers and also may
16 * include some static integer values.
18 * CPU performance is on an abstract continuous scale as against a discretized
19 * P-state scale which is tied to CPU frequency only. In brief, the basic
20 * operation involves:
22 * - OS makes a CPU performance request. (Can provide min and max bounds)
24 * - Platform (such as BMC) is free to optimize request within requested bounds
25 * depending on power/thermal budgets etc.
27 * - Platform conveys its decision back to OS
29 * The communication between OS and platform occurs through another medium
30 * called (PCC) Platform Communication Channel. This is a generic mailbox like
31 * mechanism which includes doorbell semantics to indicate register updates.
32 * See drivers/mailbox/pcc.c for details on PCC.
34 * Finer details about the PCC and CPPC spec are available in the ACPI v5.1 and
35 * above specifications.
38 #define pr_fmt(fmt) "ACPI CPPC: " fmt
40 #include <linux/cpufreq.h>
41 #include <linux/delay.h>
42 #include <linux/iopoll.h>
43 #include <linux/ktime.h>
44 #include <linux/rwsem.h>
45 #include <linux/wait.h>
47 #include <acpi/cppc_acpi.h>
49 struct cppc_pcc_data {
50 struct mbox_chan *pcc_channel;
51 void __iomem *pcc_comm_addr;
52 bool pcc_channel_acquired;
53 unsigned int deadline_us;
54 unsigned int pcc_mpar, pcc_mrtt, pcc_nominal;
56 bool pending_pcc_write_cmd; /* Any pending/batched PCC write cmds? */
57 bool platform_owns_pcc; /* Ownership of PCC subspace */
58 unsigned int pcc_write_cnt; /* Running count of PCC write commands */
61 * Lock to provide controlled access to the PCC channel.
63 * For performance critical usecases(currently cppc_set_perf)
64 * We need to take read_lock and check if channel belongs to OSPM
65 * before reading or writing to PCC subspace
66 * We need to take write_lock before transferring the channel
67 * ownership to the platform via a Doorbell
68 * This allows us to batch a number of CPPC requests if they happen
69 * to originate in about the same time
71 * For non-performance critical usecases(init)
72 * Take write_lock for all purposes which gives exclusive access
74 struct rw_semaphore pcc_lock;
76 /* Wait queue for CPUs whose requests were batched */
77 wait_queue_head_t pcc_write_wait_q;
78 ktime_t last_cmd_cmpl_time;
79 ktime_t last_mpar_reset;
80 int mpar_count;
81 int refcount;
84 /* Array to represent the PCC channel per subspace id */
85 static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES];
86 /* The cpu_pcc_subspace_idx containsper CPU subspace id */
87 static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx);
90 * The cpc_desc structure contains the ACPI register details
91 * as described in the per CPU _CPC tables. The details
92 * include the type of register (e.g. PCC, System IO, FFH etc.)
93 * and destination addresses which lets us READ/WRITE CPU performance
94 * information using the appropriate I/O methods.
96 static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
98 /* pcc mapped address + header size + offset within PCC subspace */
99 #define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \
100 0x8 + (offs))
102 /* Check if a CPC register is in PCC */
103 #define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
104 (cpc)->cpc_entry.reg.space_id == \
105 ACPI_ADR_SPACE_PLATFORM_COMM)
107 /* Evalutes to True if reg is a NULL register descriptor */
108 #define IS_NULL_REG(reg) ((reg)->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY && \
109 (reg)->address == 0 && \
110 (reg)->bit_width == 0 && \
111 (reg)->bit_offset == 0 && \
112 (reg)->access_width == 0)
114 /* Evalutes to True if an optional cpc field is supported */
115 #define CPC_SUPPORTED(cpc) ((cpc)->type == ACPI_TYPE_INTEGER ? \
116 !!(cpc)->cpc_entry.int_value : \
117 !IS_NULL_REG(&(cpc)->cpc_entry.reg))
119 * Arbitrary Retries in case the remote processor is slow to respond
120 * to PCC commands. Keeping it high enough to cover emulators where
121 * the processors run painfully slow.
123 #define NUM_RETRIES 500ULL
125 struct cppc_attr {
126 struct attribute attr;
127 ssize_t (*show)(struct kobject *kobj,
128 struct attribute *attr, char *buf);
129 ssize_t (*store)(struct kobject *kobj,
130 struct attribute *attr, const char *c, ssize_t count);
133 #define define_one_cppc_ro(_name) \
134 static struct cppc_attr _name = \
135 __ATTR(_name, 0444, show_##_name, NULL)
137 #define to_cpc_desc(a) container_of(a, struct cpc_desc, kobj)
139 #define show_cppc_data(access_fn, struct_name, member_name) \
140 static ssize_t show_##member_name(struct kobject *kobj, \
141 struct attribute *attr, char *buf) \
143 struct cpc_desc *cpc_ptr = to_cpc_desc(kobj); \
144 struct struct_name st_name = {0}; \
145 int ret; \
147 ret = access_fn(cpc_ptr->cpu_id, &st_name); \
148 if (ret) \
149 return ret; \
151 return scnprintf(buf, PAGE_SIZE, "%llu\n", \
152 (u64)st_name.member_name); \
154 define_one_cppc_ro(member_name)
156 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, highest_perf);
157 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_perf);
158 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_perf);
159 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_nonlinear_perf);
160 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_freq);
161 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_freq);
163 show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf);
164 show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
166 static ssize_t show_feedback_ctrs(struct kobject *kobj,
167 struct attribute *attr, char *buf)
169 struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
170 struct cppc_perf_fb_ctrs fb_ctrs = {0};
171 int ret;
173 ret = cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
174 if (ret)
175 return ret;
177 return scnprintf(buf, PAGE_SIZE, "ref:%llu del:%llu\n",
178 fb_ctrs.reference, fb_ctrs.delivered);
180 define_one_cppc_ro(feedback_ctrs);
182 static struct attribute *cppc_attrs[] = {
183 &feedback_ctrs.attr,
184 &reference_perf.attr,
185 &wraparound_time.attr,
186 &highest_perf.attr,
187 &lowest_perf.attr,
188 &lowest_nonlinear_perf.attr,
189 &nominal_perf.attr,
190 &nominal_freq.attr,
191 &lowest_freq.attr,
192 NULL
195 static struct kobj_type cppc_ktype = {
196 .sysfs_ops = &kobj_sysfs_ops,
197 .default_attrs = cppc_attrs,
200 static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit)
202 int ret, status;
203 struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
204 struct acpi_pcct_shared_memory __iomem *generic_comm_base =
205 pcc_ss_data->pcc_comm_addr;
207 if (!pcc_ss_data->platform_owns_pcc)
208 return 0;
211 * Poll PCC status register every 3us(delay_us) for maximum of
212 * deadline_us(timeout_us) until PCC command complete bit is set(cond)
214 ret = readw_relaxed_poll_timeout(&generic_comm_base->status, status,
215 status & PCC_CMD_COMPLETE_MASK, 3,
216 pcc_ss_data->deadline_us);
218 if (likely(!ret)) {
219 pcc_ss_data->platform_owns_pcc = false;
220 if (chk_err_bit && (status & PCC_ERROR_MASK))
221 ret = -EIO;
224 if (unlikely(ret))
225 pr_err("PCC check channel failed for ss: %d. ret=%d\n",
226 pcc_ss_id, ret);
228 return ret;
232 * This function transfers the ownership of the PCC to the platform
233 * So it must be called while holding write_lock(pcc_lock)
235 static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
237 int ret = -EIO, i;
238 struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
239 struct acpi_pcct_shared_memory *generic_comm_base =
240 (struct acpi_pcct_shared_memory *)pcc_ss_data->pcc_comm_addr;
241 unsigned int time_delta;
244 * For CMD_WRITE we know for a fact the caller should have checked
245 * the channel before writing to PCC space
247 if (cmd == CMD_READ) {
249 * If there are pending cpc_writes, then we stole the channel
250 * before write completion, so first send a WRITE command to
251 * platform
253 if (pcc_ss_data->pending_pcc_write_cmd)
254 send_pcc_cmd(pcc_ss_id, CMD_WRITE);
256 ret = check_pcc_chan(pcc_ss_id, false);
257 if (ret)
258 goto end;
259 } else /* CMD_WRITE */
260 pcc_ss_data->pending_pcc_write_cmd = FALSE;
263 * Handle the Minimum Request Turnaround Time(MRTT)
264 * "The minimum amount of time that OSPM must wait after the completion
265 * of a command before issuing the next command, in microseconds"
267 if (pcc_ss_data->pcc_mrtt) {
268 time_delta = ktime_us_delta(ktime_get(),
269 pcc_ss_data->last_cmd_cmpl_time);
270 if (pcc_ss_data->pcc_mrtt > time_delta)
271 udelay(pcc_ss_data->pcc_mrtt - time_delta);
275 * Handle the non-zero Maximum Periodic Access Rate(MPAR)
276 * "The maximum number of periodic requests that the subspace channel can
277 * support, reported in commands per minute. 0 indicates no limitation."
279 * This parameter should be ideally zero or large enough so that it can
280 * handle maximum number of requests that all the cores in the system can
281 * collectively generate. If it is not, we will follow the spec and just
282 * not send the request to the platform after hitting the MPAR limit in
283 * any 60s window
285 if (pcc_ss_data->pcc_mpar) {
286 if (pcc_ss_data->mpar_count == 0) {
287 time_delta = ktime_ms_delta(ktime_get(),
288 pcc_ss_data->last_mpar_reset);
289 if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) {
290 pr_debug("PCC cmd for subspace %d not sent due to MPAR limit",
291 pcc_ss_id);
292 ret = -EIO;
293 goto end;
295 pcc_ss_data->last_mpar_reset = ktime_get();
296 pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar;
298 pcc_ss_data->mpar_count--;
301 /* Write to the shared comm region. */
302 writew_relaxed(cmd, &generic_comm_base->command);
304 /* Flip CMD COMPLETE bit */
305 writew_relaxed(0, &generic_comm_base->status);
307 pcc_ss_data->platform_owns_pcc = true;
309 /* Ring doorbell */
310 ret = mbox_send_message(pcc_ss_data->pcc_channel, &cmd);
311 if (ret < 0) {
312 pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n",
313 pcc_ss_id, cmd, ret);
314 goto end;
317 /* wait for completion and check for PCC errro bit */
318 ret = check_pcc_chan(pcc_ss_id, true);
320 if (pcc_ss_data->pcc_mrtt)
321 pcc_ss_data->last_cmd_cmpl_time = ktime_get();
323 if (pcc_ss_data->pcc_channel->mbox->txdone_irq)
324 mbox_chan_txdone(pcc_ss_data->pcc_channel, ret);
325 else
326 mbox_client_txdone(pcc_ss_data->pcc_channel, ret);
328 end:
329 if (cmd == CMD_WRITE) {
330 if (unlikely(ret)) {
331 for_each_possible_cpu(i) {
332 struct cpc_desc *desc = per_cpu(cpc_desc_ptr, i);
333 if (!desc)
334 continue;
336 if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt)
337 desc->write_cmd_status = ret;
340 pcc_ss_data->pcc_write_cnt++;
341 wake_up_all(&pcc_ss_data->pcc_write_wait_q);
344 return ret;
347 static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret)
349 if (ret < 0)
350 pr_debug("TX did not complete: CMD sent:%x, ret:%d\n",
351 *(u16 *)msg, ret);
352 else
353 pr_debug("TX completed. CMD sent:%x, ret:%d\n",
354 *(u16 *)msg, ret);
357 struct mbox_client cppc_mbox_cl = {
358 .tx_done = cppc_chan_tx_done,
359 .knows_txdone = true,
362 static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle)
364 int result = -EFAULT;
365 acpi_status status = AE_OK;
366 struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
367 struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"};
368 struct acpi_buffer state = {0, NULL};
369 union acpi_object *psd = NULL;
370 struct acpi_psd_package *pdomain;
372 status = acpi_evaluate_object_typed(handle, "_PSD", NULL, &buffer,
373 ACPI_TYPE_PACKAGE);
374 if (ACPI_FAILURE(status))
375 return -ENODEV;
377 psd = buffer.pointer;
378 if (!psd || psd->package.count != 1) {
379 pr_debug("Invalid _PSD data\n");
380 goto end;
383 pdomain = &(cpc_ptr->domain_info);
385 state.length = sizeof(struct acpi_psd_package);
386 state.pointer = pdomain;
388 status = acpi_extract_package(&(psd->package.elements[0]),
389 &format, &state);
390 if (ACPI_FAILURE(status)) {
391 pr_debug("Invalid _PSD data for CPU:%d\n", cpc_ptr->cpu_id);
392 goto end;
395 if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
396 pr_debug("Unknown _PSD:num_entries for CPU:%d\n", cpc_ptr->cpu_id);
397 goto end;
400 if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
401 pr_debug("Unknown _PSD:revision for CPU: %d\n", cpc_ptr->cpu_id);
402 goto end;
405 if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
406 pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
407 pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
408 pr_debug("Invalid _PSD:coord_type for CPU:%d\n", cpc_ptr->cpu_id);
409 goto end;
412 result = 0;
413 end:
414 kfree(buffer.pointer);
415 return result;
419 * acpi_get_psd_map - Map the CPUs in a common freq domain.
420 * @all_cpu_data: Ptrs to CPU specific CPPC data including PSD info.
422 * Return: 0 for success or negative value for err.
424 int acpi_get_psd_map(struct cppc_cpudata **all_cpu_data)
426 int count_target;
427 int retval = 0;
428 unsigned int i, j;
429 cpumask_var_t covered_cpus;
430 struct cppc_cpudata *pr, *match_pr;
431 struct acpi_psd_package *pdomain;
432 struct acpi_psd_package *match_pdomain;
433 struct cpc_desc *cpc_ptr, *match_cpc_ptr;
435 if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))
436 return -ENOMEM;
439 * Now that we have _PSD data from all CPUs, lets setup P-state
440 * domain info.
442 for_each_possible_cpu(i) {
443 pr = all_cpu_data[i];
444 if (!pr)
445 continue;
447 if (cpumask_test_cpu(i, covered_cpus))
448 continue;
450 cpc_ptr = per_cpu(cpc_desc_ptr, i);
451 if (!cpc_ptr) {
452 retval = -EFAULT;
453 goto err_ret;
456 pdomain = &(cpc_ptr->domain_info);
457 cpumask_set_cpu(i, pr->shared_cpu_map);
458 cpumask_set_cpu(i, covered_cpus);
459 if (pdomain->num_processors <= 1)
460 continue;
462 /* Validate the Domain info */
463 count_target = pdomain->num_processors;
464 if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
465 pr->shared_type = CPUFREQ_SHARED_TYPE_ALL;
466 else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
467 pr->shared_type = CPUFREQ_SHARED_TYPE_HW;
468 else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
469 pr->shared_type = CPUFREQ_SHARED_TYPE_ANY;
471 for_each_possible_cpu(j) {
472 if (i == j)
473 continue;
475 match_cpc_ptr = per_cpu(cpc_desc_ptr, j);
476 if (!match_cpc_ptr) {
477 retval = -EFAULT;
478 goto err_ret;
481 match_pdomain = &(match_cpc_ptr->domain_info);
482 if (match_pdomain->domain != pdomain->domain)
483 continue;
485 /* Here i and j are in the same domain */
486 if (match_pdomain->num_processors != count_target) {
487 retval = -EFAULT;
488 goto err_ret;
491 if (pdomain->coord_type != match_pdomain->coord_type) {
492 retval = -EFAULT;
493 goto err_ret;
496 cpumask_set_cpu(j, covered_cpus);
497 cpumask_set_cpu(j, pr->shared_cpu_map);
500 for_each_possible_cpu(j) {
501 if (i == j)
502 continue;
504 match_pr = all_cpu_data[j];
505 if (!match_pr)
506 continue;
508 match_cpc_ptr = per_cpu(cpc_desc_ptr, j);
509 if (!match_cpc_ptr) {
510 retval = -EFAULT;
511 goto err_ret;
514 match_pdomain = &(match_cpc_ptr->domain_info);
515 if (match_pdomain->domain != pdomain->domain)
516 continue;
518 match_pr->shared_type = pr->shared_type;
519 cpumask_copy(match_pr->shared_cpu_map,
520 pr->shared_cpu_map);
524 err_ret:
525 for_each_possible_cpu(i) {
526 pr = all_cpu_data[i];
527 if (!pr)
528 continue;
530 /* Assume no coordination on any error parsing domain info */
531 if (retval) {
532 cpumask_clear(pr->shared_cpu_map);
533 cpumask_set_cpu(i, pr->shared_cpu_map);
534 pr->shared_type = CPUFREQ_SHARED_TYPE_ALL;
538 free_cpumask_var(covered_cpus);
539 return retval;
541 EXPORT_SYMBOL_GPL(acpi_get_psd_map);
543 static int register_pcc_channel(int pcc_ss_idx)
545 struct acpi_pcct_hw_reduced *cppc_ss;
546 u64 usecs_lat;
548 if (pcc_ss_idx >= 0) {
549 pcc_data[pcc_ss_idx]->pcc_channel =
550 pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx);
552 if (IS_ERR(pcc_data[pcc_ss_idx]->pcc_channel)) {
553 pr_err("Failed to find PCC channel for subspace %d\n",
554 pcc_ss_idx);
555 return -ENODEV;
559 * The PCC mailbox controller driver should
560 * have parsed the PCCT (global table of all
561 * PCC channels) and stored pointers to the
562 * subspace communication region in con_priv.
564 cppc_ss = (pcc_data[pcc_ss_idx]->pcc_channel)->con_priv;
566 if (!cppc_ss) {
567 pr_err("No PCC subspace found for %d CPPC\n",
568 pcc_ss_idx);
569 return -ENODEV;
573 * cppc_ss->latency is just a Nominal value. In reality
574 * the remote processor could be much slower to reply.
575 * So add an arbitrary amount of wait on top of Nominal.
577 usecs_lat = NUM_RETRIES * cppc_ss->latency;
578 pcc_data[pcc_ss_idx]->deadline_us = usecs_lat;
579 pcc_data[pcc_ss_idx]->pcc_mrtt = cppc_ss->min_turnaround_time;
580 pcc_data[pcc_ss_idx]->pcc_mpar = cppc_ss->max_access_rate;
581 pcc_data[pcc_ss_idx]->pcc_nominal = cppc_ss->latency;
583 pcc_data[pcc_ss_idx]->pcc_comm_addr =
584 acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length);
585 if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) {
586 pr_err("Failed to ioremap PCC comm region mem for %d\n",
587 pcc_ss_idx);
588 return -ENOMEM;
591 /* Set flag so that we dont come here for each CPU. */
592 pcc_data[pcc_ss_idx]->pcc_channel_acquired = true;
595 return 0;
599 * cpc_ffh_supported() - check if FFH reading supported
601 * Check if the architecture has support for functional fixed hardware
602 * read/write capability.
604 * Return: true for supported, false for not supported
606 bool __weak cpc_ffh_supported(void)
608 return false;
612 * pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace
614 * Check and allocate the cppc_pcc_data memory.
615 * In some processor configurations it is possible that same subspace
616 * is shared between multiple CPU's. This is seen especially in CPU's
617 * with hardware multi-threading support.
619 * Return: 0 for success, errno for failure
621 int pcc_data_alloc(int pcc_ss_id)
623 if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES)
624 return -EINVAL;
626 if (pcc_data[pcc_ss_id]) {
627 pcc_data[pcc_ss_id]->refcount++;
628 } else {
629 pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data),
630 GFP_KERNEL);
631 if (!pcc_data[pcc_ss_id])
632 return -ENOMEM;
633 pcc_data[pcc_ss_id]->refcount++;
636 return 0;
639 /* Check if CPPC revision + num_ent combination is supported */
640 static bool is_cppc_supported(int revision, int num_ent)
642 int expected_num_ent;
644 switch (revision) {
645 case CPPC_V2_REV:
646 expected_num_ent = CPPC_V2_NUM_ENT;
647 break;
648 case CPPC_V3_REV:
649 expected_num_ent = CPPC_V3_NUM_ENT;
650 break;
651 default:
652 pr_debug("Firmware exports unsupported CPPC revision: %d\n",
653 revision);
654 return false;
657 if (expected_num_ent != num_ent) {
658 pr_debug("Firmware exports %d entries. Expected: %d for CPPC rev:%d\n",
659 num_ent, expected_num_ent, revision);
660 return false;
663 return true;
667 * An example CPC table looks like the following.
669 * Name(_CPC, Package()
671 * 17,
672 * NumEntries
673 * 1,
674 * // Revision
675 * ResourceTemplate(){Register(PCC, 32, 0, 0x120, 2)},
676 * // Highest Performance
677 * ResourceTemplate(){Register(PCC, 32, 0, 0x124, 2)},
678 * // Nominal Performance
679 * ResourceTemplate(){Register(PCC, 32, 0, 0x128, 2)},
680 * // Lowest Nonlinear Performance
681 * ResourceTemplate(){Register(PCC, 32, 0, 0x12C, 2)},
682 * // Lowest Performance
683 * ResourceTemplate(){Register(PCC, 32, 0, 0x130, 2)},
684 * // Guaranteed Performance Register
685 * ResourceTemplate(){Register(PCC, 32, 0, 0x110, 2)},
686 * // Desired Performance Register
687 * ResourceTemplate(){Register(SystemMemory, 0, 0, 0, 0)},
688 * ..
689 * ..
690 * ..
693 * Each Register() encodes how to access that specific register.
694 * e.g. a sample PCC entry has the following encoding:
696 * Register (
697 * PCC,
698 * AddressSpaceKeyword
699 * 8,
700 * //RegisterBitWidth
701 * 8,
702 * //RegisterBitOffset
703 * 0x30,
704 * //RegisterAddress
706 * //AccessSize (subspace ID)
713 * acpi_cppc_processor_probe - Search for per CPU _CPC objects.
714 * @pr: Ptr to acpi_processor containing this CPUs logical Id.
716 * Return: 0 for success or negative value for err.
718 int acpi_cppc_processor_probe(struct acpi_processor *pr)
720 struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
721 union acpi_object *out_obj, *cpc_obj;
722 struct cpc_desc *cpc_ptr;
723 struct cpc_reg *gas_t;
724 struct device *cpu_dev;
725 acpi_handle handle = pr->handle;
726 unsigned int num_ent, i, cpc_rev;
727 int pcc_subspace_id = -1;
728 acpi_status status;
729 int ret = -EFAULT;
731 /* Parse the ACPI _CPC table for this cpu. */
732 status = acpi_evaluate_object_typed(handle, "_CPC", NULL, &output,
733 ACPI_TYPE_PACKAGE);
734 if (ACPI_FAILURE(status)) {
735 ret = -ENODEV;
736 goto out_buf_free;
739 out_obj = (union acpi_object *) output.pointer;
741 cpc_ptr = kzalloc(sizeof(struct cpc_desc), GFP_KERNEL);
742 if (!cpc_ptr) {
743 ret = -ENOMEM;
744 goto out_buf_free;
747 /* First entry is NumEntries. */
748 cpc_obj = &out_obj->package.elements[0];
749 if (cpc_obj->type == ACPI_TYPE_INTEGER) {
750 num_ent = cpc_obj->integer.value;
751 } else {
752 pr_debug("Unexpected entry type(%d) for NumEntries\n",
753 cpc_obj->type);
754 goto out_free;
756 cpc_ptr->num_entries = num_ent;
758 /* Second entry should be revision. */
759 cpc_obj = &out_obj->package.elements[1];
760 if (cpc_obj->type == ACPI_TYPE_INTEGER) {
761 cpc_rev = cpc_obj->integer.value;
762 } else {
763 pr_debug("Unexpected entry type(%d) for Revision\n",
764 cpc_obj->type);
765 goto out_free;
767 cpc_ptr->version = cpc_rev;
769 if (!is_cppc_supported(cpc_rev, num_ent))
770 goto out_free;
772 /* Iterate through remaining entries in _CPC */
773 for (i = 2; i < num_ent; i++) {
774 cpc_obj = &out_obj->package.elements[i];
776 if (cpc_obj->type == ACPI_TYPE_INTEGER) {
777 cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_INTEGER;
778 cpc_ptr->cpc_regs[i-2].cpc_entry.int_value = cpc_obj->integer.value;
779 } else if (cpc_obj->type == ACPI_TYPE_BUFFER) {
780 gas_t = (struct cpc_reg *)
781 cpc_obj->buffer.pointer;
784 * The PCC Subspace index is encoded inside
785 * the CPC table entries. The same PCC index
786 * will be used for all the PCC entries,
787 * so extract it only once.
789 if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
790 if (pcc_subspace_id < 0) {
791 pcc_subspace_id = gas_t->access_width;
792 if (pcc_data_alloc(pcc_subspace_id))
793 goto out_free;
794 } else if (pcc_subspace_id != gas_t->access_width) {
795 pr_debug("Mismatched PCC ids.\n");
796 goto out_free;
798 } else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
799 if (gas_t->address) {
800 void __iomem *addr;
802 addr = ioremap(gas_t->address, gas_t->bit_width/8);
803 if (!addr)
804 goto out_free;
805 cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr;
807 } else {
808 if (gas_t->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE || !cpc_ffh_supported()) {
809 /* Support only PCC ,SYS MEM and FFH type regs */
810 pr_debug("Unsupported register type: %d\n", gas_t->space_id);
811 goto out_free;
815 cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_BUFFER;
816 memcpy(&cpc_ptr->cpc_regs[i-2].cpc_entry.reg, gas_t, sizeof(*gas_t));
817 } else {
818 pr_debug("Err in entry:%d in CPC table of CPU:%d \n", i, pr->id);
819 goto out_free;
822 per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id;
825 * Initialize the remaining cpc_regs as unsupported.
826 * Example: In case FW exposes CPPC v2, the below loop will initialize
827 * LOWEST_FREQ and NOMINAL_FREQ regs as unsupported
829 for (i = num_ent - 2; i < MAX_CPC_REG_ENT; i++) {
830 cpc_ptr->cpc_regs[i].type = ACPI_TYPE_INTEGER;
831 cpc_ptr->cpc_regs[i].cpc_entry.int_value = 0;
835 /* Store CPU Logical ID */
836 cpc_ptr->cpu_id = pr->id;
838 /* Parse PSD data for this CPU */
839 ret = acpi_get_psd(cpc_ptr, handle);
840 if (ret)
841 goto out_free;
843 /* Register PCC channel once for all PCC subspace id. */
844 if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) {
845 ret = register_pcc_channel(pcc_subspace_id);
846 if (ret)
847 goto out_free;
849 init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock);
850 init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q);
853 /* Everything looks okay */
854 pr_debug("Parsed CPC struct for CPU: %d\n", pr->id);
856 /* Add per logical CPU nodes for reading its feedback counters. */
857 cpu_dev = get_cpu_device(pr->id);
858 if (!cpu_dev) {
859 ret = -EINVAL;
860 goto out_free;
863 /* Plug PSD data into this CPUs CPC descriptor. */
864 per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr;
866 ret = kobject_init_and_add(&cpc_ptr->kobj, &cppc_ktype, &cpu_dev->kobj,
867 "acpi_cppc");
868 if (ret) {
869 per_cpu(cpc_desc_ptr, pr->id) = NULL;
870 goto out_free;
873 kfree(output.pointer);
874 return 0;
876 out_free:
877 /* Free all the mapped sys mem areas for this CPU */
878 for (i = 2; i < cpc_ptr->num_entries; i++) {
879 void __iomem *addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
881 if (addr)
882 iounmap(addr);
884 kfree(cpc_ptr);
886 out_buf_free:
887 kfree(output.pointer);
888 return ret;
890 EXPORT_SYMBOL_GPL(acpi_cppc_processor_probe);
893 * acpi_cppc_processor_exit - Cleanup CPC structs.
894 * @pr: Ptr to acpi_processor containing this CPUs logical Id.
896 * Return: Void
898 void acpi_cppc_processor_exit(struct acpi_processor *pr)
900 struct cpc_desc *cpc_ptr;
901 unsigned int i;
902 void __iomem *addr;
903 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id);
905 if (pcc_ss_id >=0 && pcc_data[pcc_ss_id]) {
906 if (pcc_data[pcc_ss_id]->pcc_channel_acquired) {
907 pcc_data[pcc_ss_id]->refcount--;
908 if (!pcc_data[pcc_ss_id]->refcount) {
909 pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel);
910 pcc_data[pcc_ss_id]->pcc_channel_acquired = 0;
911 kfree(pcc_data[pcc_ss_id]);
916 cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
917 if (!cpc_ptr)
918 return;
920 /* Free all the mapped sys mem areas for this CPU */
921 for (i = 2; i < cpc_ptr->num_entries; i++) {
922 addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
923 if (addr)
924 iounmap(addr);
927 kobject_put(&cpc_ptr->kobj);
928 kfree(cpc_ptr);
930 EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit);
933 * cpc_read_ffh() - Read FFH register
934 * @cpunum: cpu number to read
935 * @reg: cppc register information
936 * @val: place holder for return value
938 * Read bit_width bits from a specified address and bit_offset
940 * Return: 0 for success and error code
942 int __weak cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
944 return -ENOTSUPP;
948 * cpc_write_ffh() - Write FFH register
949 * @cpunum: cpu number to write
950 * @reg: cppc register information
951 * @val: value to write
953 * Write value of bit_width bits to a specified address and bit_offset
955 * Return: 0 for success and error code
957 int __weak cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
959 return -ENOTSUPP;
963 * Since cpc_read and cpc_write are called while holding pcc_lock, it should be
964 * as fast as possible. We have already mapped the PCC subspace during init, so
965 * we can directly write to it.
968 static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
970 int ret_val = 0;
971 void __iomem *vaddr = 0;
972 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
973 struct cpc_reg *reg = &reg_res->cpc_entry.reg;
975 if (reg_res->type == ACPI_TYPE_INTEGER) {
976 *val = reg_res->cpc_entry.int_value;
977 return ret_val;
980 *val = 0;
981 if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
982 vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
983 else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
984 vaddr = reg_res->sys_mem_vaddr;
985 else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
986 return cpc_read_ffh(cpu, reg, val);
987 else
988 return acpi_os_read_memory((acpi_physical_address)reg->address,
989 val, reg->bit_width);
991 switch (reg->bit_width) {
992 case 8:
993 *val = readb_relaxed(vaddr);
994 break;
995 case 16:
996 *val = readw_relaxed(vaddr);
997 break;
998 case 32:
999 *val = readl_relaxed(vaddr);
1000 break;
1001 case 64:
1002 *val = readq_relaxed(vaddr);
1003 break;
1004 default:
1005 pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
1006 reg->bit_width, pcc_ss_id);
1007 ret_val = -EFAULT;
1010 return ret_val;
1013 static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
1015 int ret_val = 0;
1016 void __iomem *vaddr = 0;
1017 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
1018 struct cpc_reg *reg = &reg_res->cpc_entry.reg;
1020 if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
1021 vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
1022 else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
1023 vaddr = reg_res->sys_mem_vaddr;
1024 else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
1025 return cpc_write_ffh(cpu, reg, val);
1026 else
1027 return acpi_os_write_memory((acpi_physical_address)reg->address,
1028 val, reg->bit_width);
1030 switch (reg->bit_width) {
1031 case 8:
1032 writeb_relaxed(val, vaddr);
1033 break;
1034 case 16:
1035 writew_relaxed(val, vaddr);
1036 break;
1037 case 32:
1038 writel_relaxed(val, vaddr);
1039 break;
1040 case 64:
1041 writeq_relaxed(val, vaddr);
1042 break;
1043 default:
1044 pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
1045 reg->bit_width, pcc_ss_id);
1046 ret_val = -EFAULT;
1047 break;
1050 return ret_val;
1054 * cppc_get_desired_perf - Get the value of desired performance register.
1055 * @cpunum: CPU from which to get desired performance.
1056 * @desired_perf: address of a variable to store the returned desired performance
1058 * Return: 0 for success, -EIO otherwise.
1060 int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
1062 struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
1063 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
1064 struct cpc_register_resource *desired_reg;
1065 struct cppc_pcc_data *pcc_ss_data = NULL;
1067 desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
1069 if (CPC_IN_PCC(desired_reg)) {
1070 int ret = 0;
1072 if (pcc_ss_id < 0)
1073 return -EIO;
1075 pcc_ss_data = pcc_data[pcc_ss_id];
1077 down_write(&pcc_ss_data->pcc_lock);
1079 if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0)
1080 cpc_read(cpunum, desired_reg, desired_perf);
1081 else
1082 ret = -EIO;
1084 up_write(&pcc_ss_data->pcc_lock);
1086 return ret;
1089 cpc_read(cpunum, desired_reg, desired_perf);
1091 return 0;
1093 EXPORT_SYMBOL_GPL(cppc_get_desired_perf);
1096 * cppc_get_perf_caps - Get a CPUs performance capabilities.
1097 * @cpunum: CPU from which to get capabilities info.
1098 * @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h
1100 * Return: 0 for success with perf_caps populated else -ERRNO.
1102 int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
1104 struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
1105 struct cpc_register_resource *highest_reg, *lowest_reg,
1106 *lowest_non_linear_reg, *nominal_reg, *guaranteed_reg,
1107 *low_freq_reg = NULL, *nom_freq_reg = NULL;
1108 u64 high, low, guaranteed, nom, min_nonlinear, low_f = 0, nom_f = 0;
1109 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
1110 struct cppc_pcc_data *pcc_ss_data = NULL;
1111 int ret = 0, regs_in_pcc = 0;
1113 if (!cpc_desc) {
1114 pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
1115 return -ENODEV;
1118 highest_reg = &cpc_desc->cpc_regs[HIGHEST_PERF];
1119 lowest_reg = &cpc_desc->cpc_regs[LOWEST_PERF];
1120 lowest_non_linear_reg = &cpc_desc->cpc_regs[LOW_NON_LINEAR_PERF];
1121 nominal_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
1122 low_freq_reg = &cpc_desc->cpc_regs[LOWEST_FREQ];
1123 nom_freq_reg = &cpc_desc->cpc_regs[NOMINAL_FREQ];
1124 guaranteed_reg = &cpc_desc->cpc_regs[GUARANTEED_PERF];
1126 /* Are any of the regs PCC ?*/
1127 if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) ||
1128 CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg) ||
1129 CPC_IN_PCC(low_freq_reg) || CPC_IN_PCC(nom_freq_reg)) {
1130 if (pcc_ss_id < 0) {
1131 pr_debug("Invalid pcc_ss_id\n");
1132 return -ENODEV;
1134 pcc_ss_data = pcc_data[pcc_ss_id];
1135 regs_in_pcc = 1;
1136 down_write(&pcc_ss_data->pcc_lock);
1137 /* Ring doorbell once to update PCC subspace */
1138 if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
1139 ret = -EIO;
1140 goto out_err;
1144 cpc_read(cpunum, highest_reg, &high);
1145 perf_caps->highest_perf = high;
1147 cpc_read(cpunum, lowest_reg, &low);
1148 perf_caps->lowest_perf = low;
1150 cpc_read(cpunum, nominal_reg, &nom);
1151 perf_caps->nominal_perf = nom;
1153 cpc_read(cpunum, guaranteed_reg, &guaranteed);
1154 perf_caps->guaranteed_perf = guaranteed;
1156 cpc_read(cpunum, lowest_non_linear_reg, &min_nonlinear);
1157 perf_caps->lowest_nonlinear_perf = min_nonlinear;
1159 if (!high || !low || !nom || !min_nonlinear)
1160 ret = -EFAULT;
1162 /* Read optional lowest and nominal frequencies if present */
1163 if (CPC_SUPPORTED(low_freq_reg))
1164 cpc_read(cpunum, low_freq_reg, &low_f);
1166 if (CPC_SUPPORTED(nom_freq_reg))
1167 cpc_read(cpunum, nom_freq_reg, &nom_f);
1169 perf_caps->lowest_freq = low_f;
1170 perf_caps->nominal_freq = nom_f;
1173 out_err:
1174 if (regs_in_pcc)
1175 up_write(&pcc_ss_data->pcc_lock);
1176 return ret;
1178 EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
1181 * cppc_get_perf_ctrs - Read a CPUs performance feedback counters.
1182 * @cpunum: CPU from which to read counters.
1183 * @perf_fb_ctrs: ptr to cppc_perf_fb_ctrs. See cppc_acpi.h
1185 * Return: 0 for success with perf_fb_ctrs populated else -ERRNO.
1187 int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
1189 struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
1190 struct cpc_register_resource *delivered_reg, *reference_reg,
1191 *ref_perf_reg, *ctr_wrap_reg;
1192 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
1193 struct cppc_pcc_data *pcc_ss_data = NULL;
1194 u64 delivered, reference, ref_perf, ctr_wrap_time;
1195 int ret = 0, regs_in_pcc = 0;
1197 if (!cpc_desc) {
1198 pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
1199 return -ENODEV;
1202 delivered_reg = &cpc_desc->cpc_regs[DELIVERED_CTR];
1203 reference_reg = &cpc_desc->cpc_regs[REFERENCE_CTR];
1204 ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
1205 ctr_wrap_reg = &cpc_desc->cpc_regs[CTR_WRAP_TIME];
1208 * If refernce perf register is not supported then we should
1209 * use the nominal perf value
1211 if (!CPC_SUPPORTED(ref_perf_reg))
1212 ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
1214 /* Are any of the regs PCC ?*/
1215 if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) ||
1216 CPC_IN_PCC(ctr_wrap_reg) || CPC_IN_PCC(ref_perf_reg)) {
1217 if (pcc_ss_id < 0) {
1218 pr_debug("Invalid pcc_ss_id\n");
1219 return -ENODEV;
1221 pcc_ss_data = pcc_data[pcc_ss_id];
1222 down_write(&pcc_ss_data->pcc_lock);
1223 regs_in_pcc = 1;
1224 /* Ring doorbell once to update PCC subspace */
1225 if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
1226 ret = -EIO;
1227 goto out_err;
1231 cpc_read(cpunum, delivered_reg, &delivered);
1232 cpc_read(cpunum, reference_reg, &reference);
1233 cpc_read(cpunum, ref_perf_reg, &ref_perf);
1236 * Per spec, if ctr_wrap_time optional register is unsupported, then the
1237 * performance counters are assumed to never wrap during the lifetime of
1238 * platform
1240 ctr_wrap_time = (u64)(~((u64)0));
1241 if (CPC_SUPPORTED(ctr_wrap_reg))
1242 cpc_read(cpunum, ctr_wrap_reg, &ctr_wrap_time);
1244 if (!delivered || !reference || !ref_perf) {
1245 ret = -EFAULT;
1246 goto out_err;
1249 perf_fb_ctrs->delivered = delivered;
1250 perf_fb_ctrs->reference = reference;
1251 perf_fb_ctrs->reference_perf = ref_perf;
1252 perf_fb_ctrs->wraparound_time = ctr_wrap_time;
1253 out_err:
1254 if (regs_in_pcc)
1255 up_write(&pcc_ss_data->pcc_lock);
1256 return ret;
1258 EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
1261 * cppc_set_perf - Set a CPUs performance controls.
1262 * @cpu: CPU for which to set performance controls.
1263 * @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h
1265 * Return: 0 for success, -ERRNO otherwise.
1267 int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
1269 struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
1270 struct cpc_register_resource *desired_reg;
1271 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
1272 struct cppc_pcc_data *pcc_ss_data = NULL;
1273 int ret = 0;
1275 if (!cpc_desc) {
1276 pr_debug("No CPC descriptor for CPU:%d\n", cpu);
1277 return -ENODEV;
1280 desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
1283 * This is Phase-I where we want to write to CPC registers
1284 * -> We want all CPUs to be able to execute this phase in parallel
1286 * Since read_lock can be acquired by multiple CPUs simultaneously we
1287 * achieve that goal here
1289 if (CPC_IN_PCC(desired_reg)) {
1290 if (pcc_ss_id < 0) {
1291 pr_debug("Invalid pcc_ss_id\n");
1292 return -ENODEV;
1294 pcc_ss_data = pcc_data[pcc_ss_id];
1295 down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */
1296 if (pcc_ss_data->platform_owns_pcc) {
1297 ret = check_pcc_chan(pcc_ss_id, false);
1298 if (ret) {
1299 up_read(&pcc_ss_data->pcc_lock);
1300 return ret;
1304 * Update the pending_write to make sure a PCC CMD_READ will not
1305 * arrive and steal the channel during the switch to write lock
1307 pcc_ss_data->pending_pcc_write_cmd = true;
1308 cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt;
1309 cpc_desc->write_cmd_status = 0;
1313 * Skip writing MIN/MAX until Linux knows how to come up with
1314 * useful values.
1316 cpc_write(cpu, desired_reg, perf_ctrls->desired_perf);
1318 if (CPC_IN_PCC(desired_reg))
1319 up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */
1321 * This is Phase-II where we transfer the ownership of PCC to Platform
1323 * Short Summary: Basically if we think of a group of cppc_set_perf
1324 * requests that happened in short overlapping interval. The last CPU to
1325 * come out of Phase-I will enter Phase-II and ring the doorbell.
1327 * We have the following requirements for Phase-II:
1328 * 1. We want to execute Phase-II only when there are no CPUs
1329 * currently executing in Phase-I
1330 * 2. Once we start Phase-II we want to avoid all other CPUs from
1331 * entering Phase-I.
1332 * 3. We want only one CPU among all those who went through Phase-I
1333 * to run phase-II
1335 * If write_trylock fails to get the lock and doesn't transfer the
1336 * PCC ownership to the platform, then one of the following will be TRUE
1337 * 1. There is at-least one CPU in Phase-I which will later execute
1338 * write_trylock, so the CPUs in Phase-I will be responsible for
1339 * executing the Phase-II.
1340 * 2. Some other CPU has beaten this CPU to successfully execute the
1341 * write_trylock and has already acquired the write_lock. We know for a
1342 * fact it(other CPU acquiring the write_lock) couldn't have happened
1343 * before this CPU's Phase-I as we held the read_lock.
1344 * 3. Some other CPU executing pcc CMD_READ has stolen the
1345 * down_write, in which case, send_pcc_cmd will check for pending
1346 * CMD_WRITE commands by checking the pending_pcc_write_cmd.
1347 * So this CPU can be certain that its request will be delivered
1348 * So in all cases, this CPU knows that its request will be delivered
1349 * by another CPU and can return
1351 * After getting the down_write we still need to check for
1352 * pending_pcc_write_cmd to take care of the following scenario
1353 * The thread running this code could be scheduled out between
1354 * Phase-I and Phase-II. Before it is scheduled back on, another CPU
1355 * could have delivered the request to Platform by triggering the
1356 * doorbell and transferred the ownership of PCC to platform. So this
1357 * avoids triggering an unnecessary doorbell and more importantly before
1358 * triggering the doorbell it makes sure that the PCC channel ownership
1359 * is still with OSPM.
1360 * pending_pcc_write_cmd can also be cleared by a different CPU, if
1361 * there was a pcc CMD_READ waiting on down_write and it steals the lock
1362 * before the pcc CMD_WRITE is completed. pcc_send_cmd checks for this
1363 * case during a CMD_READ and if there are pending writes it delivers
1364 * the write command before servicing the read command
1366 if (CPC_IN_PCC(desired_reg)) {
1367 if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */
1368 /* Update only if there are pending write commands */
1369 if (pcc_ss_data->pending_pcc_write_cmd)
1370 send_pcc_cmd(pcc_ss_id, CMD_WRITE);
1371 up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */
1372 } else
1373 /* Wait until pcc_write_cnt is updated by send_pcc_cmd */
1374 wait_event(pcc_ss_data->pcc_write_wait_q,
1375 cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt);
1377 /* send_pcc_cmd updates the status in case of failure */
1378 ret = cpc_desc->write_cmd_status;
1380 return ret;
1382 EXPORT_SYMBOL_GPL(cppc_set_perf);
1385 * cppc_get_transition_latency - returns frequency transition latency in ns
1387 * ACPI CPPC does not explicitly specifiy how a platform can specify the
1388 * transition latency for perfromance change requests. The closest we have
1389 * is the timing information from the PCCT tables which provides the info
1390 * on the number and frequency of PCC commands the platform can handle.
1392 unsigned int cppc_get_transition_latency(int cpu_num)
1395 * Expected transition latency is based on the PCCT timing values
1396 * Below are definition from ACPI spec:
1397 * pcc_nominal- Expected latency to process a command, in microseconds
1398 * pcc_mpar - The maximum number of periodic requests that the subspace
1399 * channel can support, reported in commands per minute. 0
1400 * indicates no limitation.
1401 * pcc_mrtt - The minimum amount of time that OSPM must wait after the
1402 * completion of a command before issuing the next command,
1403 * in microseconds.
1405 unsigned int latency_ns = 0;
1406 struct cpc_desc *cpc_desc;
1407 struct cpc_register_resource *desired_reg;
1408 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num);
1409 struct cppc_pcc_data *pcc_ss_data;
1411 cpc_desc = per_cpu(cpc_desc_ptr, cpu_num);
1412 if (!cpc_desc)
1413 return CPUFREQ_ETERNAL;
1415 desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
1416 if (!CPC_IN_PCC(desired_reg))
1417 return CPUFREQ_ETERNAL;
1419 if (pcc_ss_id < 0)
1420 return CPUFREQ_ETERNAL;
1422 pcc_ss_data = pcc_data[pcc_ss_id];
1423 if (pcc_ss_data->pcc_mpar)
1424 latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar);
1426 latency_ns = max(latency_ns, pcc_ss_data->pcc_nominal * 1000);
1427 latency_ns = max(latency_ns, pcc_ss_data->pcc_mrtt * 1000);
1429 return latency_ns;
1431 EXPORT_SYMBOL_GPL(cppc_get_transition_latency);