dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / gpu / drm / msm / hdmi / hdmi_phy_8x60.c
bloba68eea4153fc6359f8748bfa24d0a9730c3ca0c2
1 /*
2 * Copyright (C) 2013 Red Hat
3 * Author: Rob Clark <robdclark@gmail.com>
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published by
7 * the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
14 * You should have received a copy of the GNU General Public License along with
15 * this program. If not, see <http://www.gnu.org/licenses/>.
18 #include "hdmi.h"
20 static void hdmi_phy_8x60_powerup(struct hdmi_phy *phy,
21 unsigned long int pixclock)
23 /* De-serializer delay D/C for non-lbk mode: */
24 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG0,
25 HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3));
27 if (pixclock == 27000000) {
28 /* video_format == HDMI_VFRMT_720x480p60_16_9 */
29 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
30 HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
31 HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3));
32 } else {
33 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
34 HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
35 HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4));
38 /* No matter what, start from the power down mode: */
39 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
40 HDMI_8x60_PHY_REG2_PD_PWRGEN |
41 HDMI_8x60_PHY_REG2_PD_PLL |
42 HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
43 HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
44 HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
45 HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
46 HDMI_8x60_PHY_REG2_PD_DESER);
48 /* Turn PowerGen on: */
49 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
50 HDMI_8x60_PHY_REG2_PD_PLL |
51 HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
52 HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
53 HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
54 HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
55 HDMI_8x60_PHY_REG2_PD_DESER);
57 /* Turn PLL power on: */
58 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
59 HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
60 HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
61 HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
62 HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
63 HDMI_8x60_PHY_REG2_PD_DESER);
65 /* Write to HIGH after PLL power down de-assert: */
66 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3,
67 HDMI_8x60_PHY_REG3_PLL_ENABLE);
69 /* ASIC power on; PHY REG9 = 0 */
70 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
72 /* Enable PLL lock detect, PLL lock det will go high after lock
73 * Enable the re-time logic
75 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
76 HDMI_8x60_PHY_REG12_RETIMING_EN |
77 HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN);
79 /* Drivers are on: */
80 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
81 HDMI_8x60_PHY_REG2_PD_DESER);
83 /* If the RX detector is needed: */
84 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
85 HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
86 HDMI_8x60_PHY_REG2_PD_DESER);
88 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG4, 0);
89 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG5, 0);
90 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG6, 0);
91 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG7, 0);
92 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG8, 0);
93 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
94 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG10, 0);
95 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG11, 0);
97 /* If we want to use lock enable based on counting: */
98 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
99 HDMI_8x60_PHY_REG12_RETIMING_EN |
100 HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN |
101 HDMI_8x60_PHY_REG12_FORCE_LOCK);
104 static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy)
106 /* Assert RESET PHY from controller */
107 hdmi_phy_write(phy, REG_HDMI_PHY_CTRL,
108 HDMI_PHY_CTRL_SW_RESET);
109 udelay(10);
110 /* De-assert RESET PHY from controller */
111 hdmi_phy_write(phy, REG_HDMI_PHY_CTRL, 0);
112 /* Turn off Driver */
113 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
114 HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
115 HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
116 HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
117 HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
118 HDMI_8x60_PHY_REG2_PD_DESER);
119 udelay(10);
120 /* Disable PLL */
121 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3, 0);
122 /* Power down PHY, but keep RX-sense: */
123 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
124 HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
125 HDMI_8x60_PHY_REG2_PD_PWRGEN |
126 HDMI_8x60_PHY_REG2_PD_PLL |
127 HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
128 HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
129 HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
130 HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
131 HDMI_8x60_PHY_REG2_PD_DESER);
134 const struct hdmi_phy_cfg msm_hdmi_phy_8x60_cfg = {
135 .type = MSM_HDMI_PHY_8x60,
136 .powerup = hdmi_phy_8x60_powerup,
137 .powerdown = hdmi_phy_8x60_powerdown,