dt-bindings: mtd: ingenic: Use standard ecc-engine property

[linux/fpc-iii.git] / drivers / gpu / drm / vmwgfx / vmwgfx_blit.c

// SPDX-License-Identifier: GPL-2.0 OR MIT
/**************************************************************************
 *
 * Copyright 2017 VMware, Inc., Palo Alto, CA., USA
 * All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sub license, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial portions
 * of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
 * USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 **************************************************************************/

#include "vmwgfx_drv.h"

/*
 * Template that implements find_first_diff() for a generic
 * unsigned integer type. @size and return value are in bytes.
 */
#define VMW_FIND_FIRST_DIFF(_type)                       \
static size_t vmw_find_first_diff_ ## _type              \
        (const _type * dst, const _type * src, size_t size)\
{                                                        \
        size_t i;                                        \
                                                         \
        for (i = 0; i < size; i += sizeof(_type)) {      \
                if (*dst++ != *src++)                    \
                        break;                           \
        }                                                \
                                                         \
        return i;                                        \
}


/*
 * Template that implements find_last_diff() for a generic
 * unsigned integer type. Pointers point to the item following the
 * *end* of the area to be examined. @size and return value are in
 * bytes.
 */
#define VMW_FIND_LAST_DIFF(_type)                                       \
static ssize_t vmw_find_last_diff_ ## _type(                            \
        const _type * dst, const _type * src, size_t size)              \
{                                                                       \
        while (size) {                                                  \
                if (*--dst != *--src)                                   \
                        break;                                          \
                                                                        \
                size -= sizeof(_type);                                  \
        }                                                               \
        return size;                                                    \
}


/*
 * Instantiate find diff functions for relevant unsigned integer sizes,
 * assuming that wider integers are faster (including aligning) up to the
 * architecture native width, which is assumed to be 32 bit unless
 * CONFIG_64BIT is defined.
 */
VMW_FIND_FIRST_DIFF(u8);
VMW_FIND_LAST_DIFF(u8);

VMW_FIND_FIRST_DIFF(u16);
VMW_FIND_LAST_DIFF(u16);

VMW_FIND_FIRST_DIFF(u32);
VMW_FIND_LAST_DIFF(u32);

#ifdef CONFIG_64BIT
VMW_FIND_FIRST_DIFF(u64);
VMW_FIND_LAST_DIFF(u64);
#endif


/* We use size aligned copies. This computes (addr - align(addr)) */
#define SPILL(_var, _type) ((unsigned long) _var & (sizeof(_type) - 1))


/*
 * Template to compute find_first_diff() for a certain integer type
 * including a head copy for alignment, and adjustment of parameters
 * for tail find or increased resolution find using an unsigned integer find
 * of smaller width. If finding is complete, and resolution is sufficient,
 * the macro executes a return statement. Otherwise it falls through.
 */
#define VMW_TRY_FIND_FIRST_DIFF(_type)                                  \
do {                                                                    \
        unsigned int spill = SPILL(dst, _type);                         \
        size_t diff_offs;                                               \
                                                                        \
        if (spill && spill == SPILL(src, _type) &&                      \
            sizeof(_type) - spill <= size) {                            \
                spill = sizeof(_type) - spill;                          \
                diff_offs = vmw_find_first_diff_u8(dst, src, spill);    \
                if (diff_offs < spill)                                  \
                        return round_down(offset + diff_offs, granularity); \
                                                                        \
                dst += spill;                                           \
                src += spill;                                           \
                size -= spill;                                          \
                offset += spill;                                        \
                spill = 0;                                              \
        }                                                               \
        if (!spill && !SPILL(src, _type)) {                             \
                size_t to_copy = size &  ~(sizeof(_type) - 1);          \
                                                                        \
                diff_offs = vmw_find_first_diff_ ## _type               \
                        ((_type *) dst, (_type *) src, to_copy);        \
                if (diff_offs >= size || granularity == sizeof(_type))  \
                        return (offset + diff_offs);                    \
                                                                        \
                dst += diff_offs;                                       \
                src += diff_offs;                                       \
                size -= diff_offs;                                      \
                offset += diff_offs;                                    \
        }                                                               \
} while (0)                                                             \


/**
 * vmw_find_first_diff - find the first difference between dst and src
 *
 * @dst: The destination address
 * @src: The source address
 * @size: Number of bytes to compare
 * @granularity: The granularity needed for the return value in bytes.
 * return: The offset from find start where the first difference was
 * encountered in bytes. If no difference was found, the function returns
 * a value >= @size.
 */
static size_t vmw_find_first_diff(const u8 *dst, const u8 *src, size_t size,
                                  size_t granularity)
{
        size_t offset = 0;

        /*
         * Try finding with large integers if alignment allows, or we can
         * fix it. Fall through if we need better resolution or alignment
         * was bad.
         */
#ifdef CONFIG_64BIT
        VMW_TRY_FIND_FIRST_DIFF(u64);
#endif
        VMW_TRY_FIND_FIRST_DIFF(u32);
        VMW_TRY_FIND_FIRST_DIFF(u16);

        return round_down(offset + vmw_find_first_diff_u8(dst, src, size),
                          granularity);
}


/*
 * Template to compute find_last_diff() for a certain integer type
 * including a tail copy for alignment, and adjustment of parameters
 * for head find or increased resolution find using an unsigned integer find
 * of smaller width. If finding is complete, and resolution is sufficient,
 * the macro executes a return statement. Otherwise it falls through.
 */
#define VMW_TRY_FIND_LAST_DIFF(_type)                                   \
do {                                                                    \
        unsigned int spill = SPILL(dst, _type);                         \
        ssize_t location;                                               \
        ssize_t diff_offs;                                              \
                                                                        \
        if (spill && spill <= size && spill == SPILL(src, _type)) {     \
                diff_offs = vmw_find_last_diff_u8(dst, src, spill);     \
                if (diff_offs) {                                        \
                        location = size - spill + diff_offs - 1;        \
                        return round_down(location, granularity);       \
                }                                                       \
                                                                        \
                dst -= spill;                                           \
                src -= spill;                                           \
                size -= spill;                                          \
                spill = 0;                                              \
        }                                                               \
        if (!spill && !SPILL(src, _type)) {                             \
                size_t to_copy = round_down(size, sizeof(_type));       \
                                                                        \
                diff_offs = vmw_find_last_diff_ ## _type                \
                        ((_type *) dst, (_type *) src, to_copy);        \
                location = size - to_copy + diff_offs - sizeof(_type);  \
                if (location < 0 || granularity == sizeof(_type))       \
                        return location;                                \
                                                                        \
                dst -= to_copy - diff_offs;                             \
                src -= to_copy - diff_offs;                             \
                size -= to_copy - diff_offs;                            \
        }                                                               \
} while (0)


/**
 * vmw_find_last_diff - find the last difference between dst and src
 *
 * @dst: The destination address
 * @src: The source address
 * @size: Number of bytes to compare
 * @granularity: The granularity needed for the return value in bytes.
 * return: The offset from find start where the last difference was
 * encountered in bytes, or a negative value if no difference was found.
 */
static ssize_t vmw_find_last_diff(const u8 *dst, const u8 *src, size_t size,
                                  size_t granularity)
{
        dst += size;
        src += size;

#ifdef CONFIG_64BIT
        VMW_TRY_FIND_LAST_DIFF(u64);
#endif
        VMW_TRY_FIND_LAST_DIFF(u32);
        VMW_TRY_FIND_LAST_DIFF(u16);

        return round_down(vmw_find_last_diff_u8(dst, src, size) - 1,
                          granularity);
}


/**
 * vmw_memcpy - A wrapper around kernel memcpy with allowing to plug it into a
 * struct vmw_diff_cpy.
 *
 * @diff: The struct vmw_diff_cpy closure argument (unused).
 * @dest: The copy destination.
 * @src: The copy source.
 * @n: Number of bytes to copy.
 */
void vmw_memcpy(struct vmw_diff_cpy *diff, u8 *dest, const u8 *src, size_t n)
{
        memcpy(dest, src, n);
}


/**
 * vmw_adjust_rect - Adjust rectangle coordinates for newly found difference
 *
 * @diff: The struct vmw_diff_cpy used to track the modified bounding box.
 * @diff_offs: The offset from @diff->line_offset where the difference was
 * found.
 */
static void vmw_adjust_rect(struct vmw_diff_cpy *diff, size_t diff_offs)
{
        size_t offs = (diff_offs + diff->line_offset) / diff->cpp;
        struct drm_rect *rect = &diff->rect;

        rect->x1 = min_t(int, rect->x1, offs);
        rect->x2 = max_t(int, rect->x2, offs + 1);
        rect->y1 = min_t(int, rect->y1, diff->line);
        rect->y2 = max_t(int, rect->y2, diff->line + 1);
}

/**
 * vmw_diff_memcpy - memcpy that creates a bounding box of modified content.
 *
 * @diff: The struct vmw_diff_cpy used to track the modified bounding box.
 * @dest: The copy destination.
 * @src: The copy source.
 * @n: Number of bytes to copy.
 *
 * In order to correctly track the modified content, the field @diff->line must
 * be pre-loaded with the current line number, the field @diff->line_offset must
 * be pre-loaded with the line offset in bytes where the copy starts, and
 * finally the field @diff->cpp need to be preloaded with the number of bytes
 * per unit in the horizontal direction of the area we're examining.
 * Typically bytes per pixel.
 * This is needed to know the needed granularity of the difference computing
 * operations. A higher cpp generally leads to faster execution at the cost of
 * bounding box width precision.
 */
void vmw_diff_memcpy(struct vmw_diff_cpy *diff, u8 *dest, const u8 *src,
                     size_t n)
{
        ssize_t csize, byte_len;

        if (WARN_ON_ONCE(round_down(n, diff->cpp) != n))
                return;

        /* TODO: Possibly use a single vmw_find_first_diff per line? */
        csize = vmw_find_first_diff(dest, src, n, diff->cpp);
        if (csize < n) {
                vmw_adjust_rect(diff, csize);
                byte_len = diff->cpp;

                /*
                 * Starting from where first difference was found, find
                 * location of last difference, and then copy.
                 */
                diff->line_offset += csize;
                dest += csize;
                src += csize;
                n -= csize;
                csize = vmw_find_last_diff(dest, src, n, diff->cpp);
                if (csize >= 0) {
                        byte_len += csize;
                        vmw_adjust_rect(diff, csize);
                }
                memcpy(dest, src, byte_len);
        }
        diff->line_offset += n;
}

/**
 * struct vmw_bo_blit_line_data - Convenience argument to vmw_bo_cpu_blit_line
 *
 * @mapped_dst: Already mapped destination page index in @dst_pages.
 * @dst_addr: Kernel virtual address of mapped destination page.
 * @dst_pages: Array of destination bo pages.
 * @dst_num_pages: Number of destination bo pages.
 * @dst_prot: Destination bo page protection.
 * @mapped_src: Already mapped source page index in @dst_pages.
 * @src_addr: Kernel virtual address of mapped source page.
 * @src_pages: Array of source bo pages.
 * @src_num_pages: Number of source bo pages.
 * @src_prot: Source bo page protection.
 * @diff: Struct vmw_diff_cpy, in the end forwarded to the memcpy routine.
 */
struct vmw_bo_blit_line_data {
        u32 mapped_dst;
        u8 *dst_addr;
        struct page **dst_pages;
        u32 dst_num_pages;
        pgprot_t dst_prot;
        u32 mapped_src;
        u8 *src_addr;
        struct page **src_pages;
        u32 src_num_pages;
        pgprot_t src_prot;
        struct vmw_diff_cpy *diff;
};

/**
 * vmw_bo_cpu_blit_line - Blit part of a line from one bo to another.
 *
 * @d: Blit data as described above.
 * @dst_offset: Destination copy start offset from start of bo.
 * @src_offset: Source copy start offset from start of bo.
 * @bytes_to_copy: Number of bytes to copy in this line.
 */
static int vmw_bo_cpu_blit_line(struct vmw_bo_blit_line_data *d,
                                u32 dst_offset,
                                u32 src_offset,
                                u32 bytes_to_copy)
{
        struct vmw_diff_cpy *diff = d->diff;

        while (bytes_to_copy) {
                u32 copy_size = bytes_to_copy;
                u32 dst_page = dst_offset >> PAGE_SHIFT;
                u32 src_page = src_offset >> PAGE_SHIFT;
                u32 dst_page_offset = dst_offset & ~PAGE_MASK;
                u32 src_page_offset = src_offset & ~PAGE_MASK;
                bool unmap_dst = d->dst_addr && dst_page != d->mapped_dst;
                bool unmap_src = d->src_addr && (src_page != d->mapped_src ||
                                                 unmap_dst);

                copy_size = min_t(u32, copy_size, PAGE_SIZE - dst_page_offset);
                copy_size = min_t(u32, copy_size, PAGE_SIZE - src_page_offset);

                if (unmap_src) {
                        ttm_kunmap_atomic_prot(d->src_addr, d->src_prot);
                        d->src_addr = NULL;
                }

                if (unmap_dst) {
                        ttm_kunmap_atomic_prot(d->dst_addr, d->dst_prot);
                        d->dst_addr = NULL;
                }

                if (!d->dst_addr) {
                        if (WARN_ON_ONCE(dst_page >= d->dst_num_pages))
                                return -EINVAL;

                        d->dst_addr =
                                ttm_kmap_atomic_prot(d->dst_pages[dst_page],
                                                     d->dst_prot);
                        if (!d->dst_addr)
                                return -ENOMEM;

                        d->mapped_dst = dst_page;
                }

                if (!d->src_addr) {
                        if (WARN_ON_ONCE(src_page >= d->src_num_pages))
                                return -EINVAL;

                        d->src_addr =
                                ttm_kmap_atomic_prot(d->src_pages[src_page],
                                                     d->src_prot);
                        if (!d->src_addr)
                                return -ENOMEM;

                        d->mapped_src = src_page;
                }
                diff->do_cpy(diff, d->dst_addr + dst_page_offset,
                             d->src_addr + src_page_offset, copy_size);

                bytes_to_copy -= copy_size;
                dst_offset += copy_size;
                src_offset += copy_size;
        }

        return 0;
}

/**
 * ttm_bo_cpu_blit - in-kernel cpu blit.
 *
 * @dst: Destination buffer object.
 * @dst_offset: Destination offset of blit start in bytes.
 * @dst_stride: Destination stride in bytes.
 * @src: Source buffer object.
 * @src_offset: Source offset of blit start in bytes.
 * @src_stride: Source stride in bytes.
 * @w: Width of blit.
 * @h: Height of blit.
 * return: Zero on success. Negative error value on failure. Will print out
 * kernel warnings on caller bugs.
 *
 * Performs a CPU blit from one buffer object to another avoiding a full
 * bo vmap which may exhaust- or fragment vmalloc space.
 * On supported architectures (x86), we're using kmap_atomic which avoids
 * cross-processor TLB- and cache flushes and may, on non-HIGHMEM systems
 * reference already set-up mappings.
 *
 * Neither of the buffer objects may be placed in PCI memory
 * (Fixed memory in TTM terminology) when using this function.
 */
int vmw_bo_cpu_blit(struct ttm_buffer_object *dst,
                    u32 dst_offset, u32 dst_stride,
                    struct ttm_buffer_object *src,
                    u32 src_offset, u32 src_stride,
                    u32 w, u32 h,
                    struct vmw_diff_cpy *diff)
{
        struct ttm_operation_ctx ctx = {
                .interruptible = false,
                .no_wait_gpu = false
        };
        u32 j, initial_line = dst_offset / dst_stride;
        struct vmw_bo_blit_line_data d;
        int ret = 0;

        /* Buffer objects need to be either pinned or reserved: */
        if (!(dst->mem.placement & TTM_PL_FLAG_NO_EVICT))
                lockdep_assert_held(&dst->resv->lock.base);
        if (!(src->mem.placement & TTM_PL_FLAG_NO_EVICT))
                lockdep_assert_held(&src->resv->lock.base);

        if (dst->ttm->state == tt_unpopulated) {
                ret = dst->ttm->bdev->driver->ttm_tt_populate(dst->ttm, &ctx);
                if (ret)
                        return ret;
        }

        if (src->ttm->state == tt_unpopulated) {
                ret = src->ttm->bdev->driver->ttm_tt_populate(src->ttm, &ctx);
                if (ret)
                        return ret;
        }

        d.mapped_dst = 0;
        d.mapped_src = 0;
        d.dst_addr = NULL;
        d.src_addr = NULL;
        d.dst_pages = dst->ttm->pages;
        d.src_pages = src->ttm->pages;
        d.dst_num_pages = dst->num_pages;
        d.src_num_pages = src->num_pages;
        d.dst_prot = ttm_io_prot(dst->mem.placement, PAGE_KERNEL);
        d.src_prot = ttm_io_prot(src->mem.placement, PAGE_KERNEL);
        d.diff = diff;

        for (j = 0; j < h; ++j) {
                diff->line = j + initial_line;
                diff->line_offset = dst_offset % dst_stride;
                ret = vmw_bo_cpu_blit_line(&d, dst_offset, src_offset, w);
                if (ret)
                        goto out;

                dst_offset += dst_stride;
                src_offset += src_stride;
        }
out:
        if (d.src_addr)
                ttm_kunmap_atomic_prot(d.src_addr, d.src_prot);
        if (d.dst_addr)
                ttm_kunmap_atomic_prot(d.dst_addr, d.dst_prot);

        return ret;
}