dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / nvmem / lpc18xx_eeprom.c
blob66cff1e2147a9a0cd186b57aca856a09e4d0668f
1 /*
2 * NXP LPC18xx/LPC43xx EEPROM memory NVMEM driver
4 * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published by
8 * the Free Software Foundation.
9 */
11 #include <linux/clk.h>
12 #include <linux/device.h>
13 #include <linux/delay.h>
14 #include <linux/err.h>
15 #include <linux/io.h>
16 #include <linux/module.h>
17 #include <linux/mod_devicetable.h>
18 #include <linux/nvmem-provider.h>
19 #include <linux/platform_device.h>
20 #include <linux/reset.h>
22 /* Registers */
23 #define LPC18XX_EEPROM_AUTOPROG 0x00c
24 #define LPC18XX_EEPROM_AUTOPROG_WORD 0x1
26 #define LPC18XX_EEPROM_CLKDIV 0x014
28 #define LPC18XX_EEPROM_PWRDWN 0x018
29 #define LPC18XX_EEPROM_PWRDWN_NO 0x0
30 #define LPC18XX_EEPROM_PWRDWN_YES 0x1
32 #define LPC18XX_EEPROM_INTSTAT 0xfe0
33 #define LPC18XX_EEPROM_INTSTAT_END_OF_PROG BIT(2)
35 #define LPC18XX_EEPROM_INTSTATCLR 0xfe8
36 #define LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST BIT(2)
38 /* Fixed page size (bytes) */
39 #define LPC18XX_EEPROM_PAGE_SIZE 0x80
41 /* EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) */
42 #define LPC18XX_EEPROM_CLOCK_HZ 1500000
44 /* EEPROM requires 3 ms of erase/program time between each writing */
45 #define LPC18XX_EEPROM_PROGRAM_TIME 3
47 struct lpc18xx_eeprom_dev {
48 struct clk *clk;
49 void __iomem *reg_base;
50 void __iomem *mem_base;
51 struct nvmem_device *nvmem;
52 unsigned reg_bytes;
53 unsigned val_bytes;
54 int size;
57 static inline void lpc18xx_eeprom_writel(struct lpc18xx_eeprom_dev *eeprom,
58 u32 reg, u32 val)
60 writel(val, eeprom->reg_base + reg);
63 static inline u32 lpc18xx_eeprom_readl(struct lpc18xx_eeprom_dev *eeprom,
64 u32 reg)
66 return readl(eeprom->reg_base + reg);
69 static int lpc18xx_eeprom_busywait_until_prog(struct lpc18xx_eeprom_dev *eeprom)
71 unsigned long end;
72 u32 val;
74 /* Wait until EEPROM program operation has finished */
75 end = jiffies + msecs_to_jiffies(LPC18XX_EEPROM_PROGRAM_TIME * 10);
77 while (time_is_after_jiffies(end)) {
78 val = lpc18xx_eeprom_readl(eeprom, LPC18XX_EEPROM_INTSTAT);
80 if (val & LPC18XX_EEPROM_INTSTAT_END_OF_PROG) {
81 lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_INTSTATCLR,
82 LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST);
83 return 0;
86 usleep_range(LPC18XX_EEPROM_PROGRAM_TIME * USEC_PER_MSEC,
87 (LPC18XX_EEPROM_PROGRAM_TIME + 1) * USEC_PER_MSEC);
90 return -ETIMEDOUT;
93 static int lpc18xx_eeprom_gather_write(void *context, unsigned int reg,
94 void *val, size_t bytes)
96 struct lpc18xx_eeprom_dev *eeprom = context;
97 unsigned int offset = reg;
98 int ret;
101 * The last page contains the EEPROM initialization data and is not
102 * writable.
104 if ((reg > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE) ||
105 (reg + bytes > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE))
106 return -EINVAL;
109 lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
110 LPC18XX_EEPROM_PWRDWN_NO);
112 /* Wait 100 us while the EEPROM wakes up */
113 usleep_range(100, 200);
115 while (bytes) {
116 writel(*(u32 *)val, eeprom->mem_base + offset);
117 ret = lpc18xx_eeprom_busywait_until_prog(eeprom);
118 if (ret < 0)
119 return ret;
121 bytes -= eeprom->val_bytes;
122 val += eeprom->val_bytes;
123 offset += eeprom->val_bytes;
126 lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
127 LPC18XX_EEPROM_PWRDWN_YES);
129 return 0;
132 static int lpc18xx_eeprom_read(void *context, unsigned int offset,
133 void *val, size_t bytes)
135 struct lpc18xx_eeprom_dev *eeprom = context;
137 lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
138 LPC18XX_EEPROM_PWRDWN_NO);
140 /* Wait 100 us while the EEPROM wakes up */
141 usleep_range(100, 200);
143 while (bytes) {
144 *(u32 *)val = readl(eeprom->mem_base + offset);
145 bytes -= eeprom->val_bytes;
146 val += eeprom->val_bytes;
147 offset += eeprom->val_bytes;
150 lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
151 LPC18XX_EEPROM_PWRDWN_YES);
153 return 0;
157 static struct nvmem_config lpc18xx_nvmem_config = {
158 .name = "lpc18xx-eeprom",
159 .stride = 4,
160 .word_size = 4,
161 .reg_read = lpc18xx_eeprom_read,
162 .reg_write = lpc18xx_eeprom_gather_write,
165 static int lpc18xx_eeprom_probe(struct platform_device *pdev)
167 struct lpc18xx_eeprom_dev *eeprom;
168 struct device *dev = &pdev->dev;
169 struct reset_control *rst;
170 unsigned long clk_rate;
171 struct resource *res;
172 int ret;
174 eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
175 if (!eeprom)
176 return -ENOMEM;
178 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
179 eeprom->reg_base = devm_ioremap_resource(dev, res);
180 if (IS_ERR(eeprom->reg_base))
181 return PTR_ERR(eeprom->reg_base);
183 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
184 eeprom->mem_base = devm_ioremap_resource(dev, res);
185 if (IS_ERR(eeprom->mem_base))
186 return PTR_ERR(eeprom->mem_base);
188 eeprom->clk = devm_clk_get(&pdev->dev, "eeprom");
189 if (IS_ERR(eeprom->clk)) {
190 dev_err(&pdev->dev, "failed to get eeprom clock\n");
191 return PTR_ERR(eeprom->clk);
194 ret = clk_prepare_enable(eeprom->clk);
195 if (ret < 0) {
196 dev_err(dev, "failed to prepare/enable eeprom clk: %d\n", ret);
197 return ret;
200 rst = devm_reset_control_get_exclusive(dev, NULL);
201 if (IS_ERR(rst)) {
202 dev_err(dev, "failed to get reset: %ld\n", PTR_ERR(rst));
203 ret = PTR_ERR(rst);
204 goto err_clk;
207 ret = reset_control_assert(rst);
208 if (ret < 0) {
209 dev_err(dev, "failed to assert reset: %d\n", ret);
210 goto err_clk;
213 eeprom->val_bytes = 4;
214 eeprom->reg_bytes = 4;
217 * Clock rate is generated by dividing the system bus clock by the
218 * division factor, contained in the divider register (minus 1 encoded).
220 clk_rate = clk_get_rate(eeprom->clk);
221 clk_rate = DIV_ROUND_UP(clk_rate, LPC18XX_EEPROM_CLOCK_HZ) - 1;
222 lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_CLKDIV, clk_rate);
225 * Writing a single word to the page will start the erase/program cycle
226 * automatically
228 lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_AUTOPROG,
229 LPC18XX_EEPROM_AUTOPROG_WORD);
231 lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
232 LPC18XX_EEPROM_PWRDWN_YES);
234 eeprom->size = resource_size(res);
235 lpc18xx_nvmem_config.size = resource_size(res);
236 lpc18xx_nvmem_config.dev = dev;
237 lpc18xx_nvmem_config.priv = eeprom;
239 eeprom->nvmem = devm_nvmem_register(dev, &lpc18xx_nvmem_config);
240 if (IS_ERR(eeprom->nvmem)) {
241 ret = PTR_ERR(eeprom->nvmem);
242 goto err_clk;
245 platform_set_drvdata(pdev, eeprom);
247 return 0;
249 err_clk:
250 clk_disable_unprepare(eeprom->clk);
252 return ret;
255 static int lpc18xx_eeprom_remove(struct platform_device *pdev)
257 struct lpc18xx_eeprom_dev *eeprom = platform_get_drvdata(pdev);
259 clk_disable_unprepare(eeprom->clk);
261 return 0;
264 static const struct of_device_id lpc18xx_eeprom_of_match[] = {
265 { .compatible = "nxp,lpc1857-eeprom" },
266 { },
268 MODULE_DEVICE_TABLE(of, lpc18xx_eeprom_of_match);
270 static struct platform_driver lpc18xx_eeprom_driver = {
271 .probe = lpc18xx_eeprom_probe,
272 .remove = lpc18xx_eeprom_remove,
273 .driver = {
274 .name = "lpc18xx-eeprom",
275 .of_match_table = lpc18xx_eeprom_of_match,
279 module_platform_driver(lpc18xx_eeprom_driver);
281 MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
282 MODULE_DESCRIPTION("NXP LPC18xx EEPROM memory Driver");
283 MODULE_LICENSE("GPL v2");