drivers/usb/serial/io_ti.h

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*****************************************************************************
   3  *
   4  *      Copyright (C) 1997-2002 Inside Out Networks, Inc.
   5  *
   6  *      Feb-16-2001     DMI     Added I2C structure definitions
   7  *      May-29-2002     gkh     Ported to Linux
   8  *
   9  *
  10  ******************************************************************************/
  11
  12 #ifndef _IO_TI_H_
  13 #define _IO_TI_H_
  14
  15 /* Address Space */
  16 #define DTK_ADDR_SPACE_XDATA            0x03    /* Addr is placed in XDATA space */
  17 #define DTK_ADDR_SPACE_I2C_TYPE_II      0x82    /* Addr is placed in I2C area */
  18 #define DTK_ADDR_SPACE_I2C_TYPE_III     0x83    /* Addr is placed in I2C area */
  19
  20 /* UART Defines */
  21 #define UMPMEM_BASE_UART1               0xFFA0  /* UMP UART1 base address */
  22 #define UMPMEM_BASE_UART2               0xFFB0  /* UMP UART2 base address */
  23 #define UMPMEM_OFFS_UART_LSR            0x05    /* UMP UART LSR register offset */
  24
  25 /* Bits per character */
  26 #define UMP_UART_CHAR5BITS              0x00
  27 #define UMP_UART_CHAR6BITS              0x01
  28 #define UMP_UART_CHAR7BITS              0x02
  29 #define UMP_UART_CHAR8BITS              0x03
  30
  31 /* Parity */
  32 #define UMP_UART_NOPARITY               0x00
  33 #define UMP_UART_ODDPARITY              0x01
  34 #define UMP_UART_EVENPARITY             0x02
  35 #define UMP_UART_MARKPARITY             0x03
  36 #define UMP_UART_SPACEPARITY            0x04
  37
  38 /* Stop bits */
  39 #define UMP_UART_STOPBIT1               0x00
  40 #define UMP_UART_STOPBIT15              0x01
  41 #define UMP_UART_STOPBIT2               0x02
  42
  43 /* Line status register masks */
  44 #define UMP_UART_LSR_OV_MASK            0x01
  45 #define UMP_UART_LSR_PE_MASK            0x02
  46 #define UMP_UART_LSR_FE_MASK            0x04
  47 #define UMP_UART_LSR_BR_MASK            0x08
  48 #define UMP_UART_LSR_ER_MASK            0x0F
  49 #define UMP_UART_LSR_RX_MASK            0x10
  50 #define UMP_UART_LSR_TX_MASK            0x20
  51
  52 #define UMP_UART_LSR_DATA_MASK          (LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)
  53
  54 /* Port Settings Constants) */
  55 #define UMP_MASK_UART_FLAGS_RTS_FLOW            0x0001
  56 #define UMP_MASK_UART_FLAGS_RTS_DISABLE         0x0002
  57 #define UMP_MASK_UART_FLAGS_PARITY              0x0008
  58 #define UMP_MASK_UART_FLAGS_OUT_X_DSR_FLOW      0x0010
  59 #define UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW      0x0020
  60 #define UMP_MASK_UART_FLAGS_OUT_X               0x0040
  61 #define UMP_MASK_UART_FLAGS_OUT_XA              0x0080
  62 #define UMP_MASK_UART_FLAGS_IN_X                0x0100
  63 #define UMP_MASK_UART_FLAGS_DTR_FLOW            0x0800
  64 #define UMP_MASK_UART_FLAGS_DTR_DISABLE         0x1000
  65 #define UMP_MASK_UART_FLAGS_RECEIVE_MS_INT      0x2000
  66 #define UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR   0x4000
  67
  68 #define UMP_DMA_MODE_CONTINOUS                  0x01
  69 #define UMP_PIPE_TRANS_TIMEOUT_ENA              0x80
  70 #define UMP_PIPE_TRANSFER_MODE_MASK             0x03
  71 #define UMP_PIPE_TRANS_TIMEOUT_MASK             0x7C
  72
  73 /* Purge port Direction Mask Bits */
  74 #define UMP_PORT_DIR_OUT                        0x01
  75 #define UMP_PORT_DIR_IN                         0x02
  76
  77 /* Address of Port 0 */
  78 #define UMPM_UART1_PORT                         0x03
  79
  80 /* Commands */
  81 #define UMPC_SET_CONFIG                 0x05
  82 #define UMPC_OPEN_PORT                  0x06
  83 #define UMPC_CLOSE_PORT                 0x07
  84 #define UMPC_START_PORT                 0x08
  85 #define UMPC_STOP_PORT                  0x09
  86 #define UMPC_TEST_PORT                  0x0A
  87 #define UMPC_PURGE_PORT                 0x0B
  88
  89 /* Force the Firmware to complete the current Read */
  90 #define UMPC_COMPLETE_READ              0x80
  91 /* Force UMP back into BOOT Mode */
  92 #define UMPC_HARDWARE_RESET             0x81
  93 /*
  94  * Copy current download image to type 0xf2 record in 16k I2C
  95  * firmware will change 0xff record to type 2 record when complete
  96  */
  97 #define UMPC_COPY_DNLD_TO_I2C           0x82
  98
  99 /*
 100  * Special function register commands
 101  * wIndex is register address
 102  * wValue is MSB/LSB mask/data
 103  */
 104 #define UMPC_WRITE_SFR                  0x83    /* Write SFR Register */
 105
 106 /* wIndex is register address */
 107 #define UMPC_READ_SFR                   0x84    /* Read SRF Register */
 108
 109 /* Set or Clear DTR (wValue bit 0 Set/Clear)    wIndex ModuleID (port) */
 110 #define UMPC_SET_CLR_DTR                0x85
 111
 112 /* Set or Clear RTS (wValue bit 0 Set/Clear)    wIndex ModuleID (port) */
 113 #define UMPC_SET_CLR_RTS                0x86
 114
 115 /* Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */
 116 #define UMPC_SET_CLR_LOOPBACK           0x87
 117
 118 /* Set or Clear BREAK (wValue bit 0 Set/Clear)  wIndex ModuleID (port) */
 119 #define UMPC_SET_CLR_BREAK              0x88
 120
 121 /* Read MSR wIndex ModuleID (port) */
 122 #define UMPC_READ_MSR                   0x89
 123
 124 /* Toolkit commands */
 125 /* Read-write group */
 126 #define UMPC_MEMORY_READ                0x92
 127 #define UMPC_MEMORY_WRITE               0x93
 128
 129 /*
 130  *      UMP DMA Definitions
 131  */
 132 #define UMPD_OEDB1_ADDRESS              0xFF08
 133 #define UMPD_OEDB2_ADDRESS              0xFF10
 134
 135 struct out_endpoint_desc_block {
 136         __u8 Configuration;
 137         __u8 XBufAddr;
 138         __u8 XByteCount;
 139         __u8 Unused1;
 140         __u8 Unused2;
 141         __u8 YBufAddr;
 142         __u8 YByteCount;
 143         __u8 BufferSize;
 144 } __attribute__((packed));
 145
 146
 147 /*
 148  * TYPE DEFINITIONS
 149  * Structures for Firmware commands
 150  */
 151 /* UART settings */
 152 struct ump_uart_config {
 153         __u16 wBaudRate;        /* Baud rate                        */
 154         __u16 wFlags;           /* Bitmap mask of flags             */
 155         __u8 bDataBits;         /* 5..8 - data bits per character   */
 156         __u8 bParity;           /* Parity settings                  */
 157         __u8 bStopBits;         /* Stop bits settings               */
 158         char cXon;              /* XON character                    */
 159         char cXoff;             /* XOFF character                   */
 160         __u8 bUartMode;         /* Will be updated when a user      */
 161                                 /* interface is defined             */
 162 } __attribute__((packed));
 163
 164
 165 /*
 166  * TYPE DEFINITIONS
 167  * Structures for USB interrupts
 168  */
 169 /* Interrupt packet structure */
 170 struct ump_interrupt {
 171         __u8 bICode;                    /* Interrupt code (interrupt num)   */
 172         __u8 bIInfo;                    /* Interrupt information            */
 173 }  __attribute__((packed));
 174
 175
 176 #define TIUMP_GET_PORT_FROM_CODE(c)     (((c) >> 6) & 0x01)
 177 #define TIUMP_GET_FUNC_FROM_CODE(c)     ((c) & 0x0f)
 178 #define TIUMP_INTERRUPT_CODE_LSR        0x03
 179 #define TIUMP_INTERRUPT_CODE_MSR        0x04
 180
 181 #endif