drivers/usb/serial/kobil_sct.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #define SUSBCRequest_SetBaudRateParityAndStopBits       1
   3 #define SUSBCR_SBR_MASK                         0xFF00
   4 #define SUSBCR_SBR_1200                         0x0100
   5 #define SUSBCR_SBR_9600                         0x0200
   6 #define SUSBCR_SBR_19200                        0x0400
   7 #define SUSBCR_SBR_28800                        0x0800
   8 #define SUSBCR_SBR_38400                        0x1000
   9 #define SUSBCR_SBR_57600                        0x2000
  10 #define SUSBCR_SBR_115200                       0x4000
  11
  12 #define SUSBCR_SPASB_MASK                       0x0070
  13 #define SUSBCR_SPASB_NoParity                   0x0010
  14 #define SUSBCR_SPASB_OddParity                  0x0020
  15 #define SUSBCR_SPASB_EvenParity                 0x0040
  16
  17 #define SUSBCR_SPASB_STPMASK                    0x0003
  18 #define SUSBCR_SPASB_1StopBit                   0x0001
  19 #define SUSBCR_SPASB_2StopBits                  0x0002
  20
  21 #define SUSBCRequest_SetStatusLinesOrQueues     2
  22 #define SUSBCR_SSL_SETRTS                       0x0001
  23 #define SUSBCR_SSL_CLRRTS                       0x0002
  24 #define SUSBCR_SSL_SETDTR                       0x0004
  25 #define SUSBCR_SSL_CLRDTR                       0x0010
  26
  27 /* Kill the pending/current writes to the comm port. */
  28 #define SUSBCR_SSL_PURGE_TXABORT                0x0100
  29 /* Kill the pending/current reads to the comm port. */
  30 #define SUSBCR_SSL_PURGE_RXABORT                0x0200
  31 /* Kill the transmit queue if there. */
  32 #define SUSBCR_SSL_PURGE_TXCLEAR                0x0400
  33 /* Kill the typeahead buffer if there. */
  34 #define SUSBCR_SSL_PURGE_RXCLEAR                0x0800
  35
  36 #define SUSBCRequest_GetStatusLineState         4
  37 /* Any Character received */
  38 #define SUSBCR_GSL_RXCHAR                       0x0001
  39 /* Transmitt Queue Empty */
  40 #define SUSBCR_GSL_TXEMPTY                      0x0004
  41 /* CTS changed state */
  42 #define SUSBCR_GSL_CTS                          0x0008
  43 /* DSR changed state */
  44 #define SUSBCR_GSL_DSR                          0x0010
  45 /* RLSD changed state */
  46 #define SUSBCR_GSL_RLSD                         0x0020
  47 /* BREAK received */
  48 #define SUSBCR_GSL_BREAK                        0x0040
  49 /* Line status error occurred */
  50 #define SUSBCR_GSL_ERR                          0x0080
  51 /* Ring signal detected */
  52 #define SUSBCR_GSL_RING                         0x0100
  53
  54 #define SUSBCRequest_Misc                       8
  55 /* use a predefined reset sequence */
  56 #define SUSBCR_MSC_ResetReader                  0x0001
  57 /* use a predefined sequence to reset the internal queues */
  58 #define SUSBCR_MSC_ResetAllQueues               0x0002
  59
  60 #define SUSBCRequest_GetMisc                    0x10
  61
  62 /*
  63  * get the firmware version from device, coded like this 0xHHLLBBPP with
  64  * HH = Firmware Version High Byte
  65  * LL = Firmware Version Low Byte
  66  * BB = Build Number
  67  * PP = Further Attributes
  68  */
  69 #define SUSBCR_MSC_GetFWVersion                 0x0001
  70
  71 /*
  72  * get the hardware version from device coded like this 0xHHLLPPRR with
  73  * HH = Software Version High Byte
  74  * LL = Software Version Low Byte
  75  * PP = Further Attributes
  76  * RR = Reserved for the hardware ID
  77  */
  78 #define SUSBCR_MSC_GetHWVersion                 0x0002