?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / usb / serial / ti_usb_3410_5052.c
blobdd0ad67aa71e619907afdab6dc142a4335684e51
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * TI 3410/5052 USB Serial Driver
4 *
5 * Copyright (C) 2004 Texas Instruments
6 *
7 * This driver is based on the Linux io_ti driver, which is
8 * Copyright (C) 2000-2002 Inside Out Networks
9 * Copyright (C) 2001-2002 Greg Kroah-Hartman
10 *
11 * For questions or problems with this driver, contact Texas Instruments
12 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
13 * Peter Berger <pberger@brimson.com>.
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/firmware.h>
19 #include <linux/slab.h>
20 #include <linux/tty.h>
21 #include <linux/tty_driver.h>
22 #include <linux/tty_flip.h>
23 #include <linux/module.h>
24 #include <linux/spinlock.h>
25 #include <linux/ioctl.h>
26 #include <linux/serial.h>
27 #include <linux/kfifo.h>
28 #include <linux/mutex.h>
29 #include <linux/uaccess.h>
30 #include <linux/usb.h>
31 #include <linux/usb/serial.h>
32
33 /* Configuration ids */
34 #define TI_BOOT_CONFIG 1
35 #define TI_ACTIVE_CONFIG 2
36
37 /* Vendor and product ids */
38 #define TI_VENDOR_ID 0x0451
39 #define IBM_VENDOR_ID 0x04b3
40 #define TI_3410_PRODUCT_ID 0x3410
41 #define IBM_4543_PRODUCT_ID 0x4543
42 #define IBM_454B_PRODUCT_ID 0x454b
43 #define IBM_454C_PRODUCT_ID 0x454c
44 #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
45 #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
46 #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
47 #define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */
48 #define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */
49 #define FRI2_PRODUCT_ID 0x5053 /* Fish River Island II */
50
51 /* Multi-Tech vendor and product ids */
52 #define MTS_VENDOR_ID 0x06E0
53 #define MTS_GSM_NO_FW_PRODUCT_ID 0xF108
54 #define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109
55 #define MTS_CDMA_PRODUCT_ID 0xF110
56 #define MTS_GSM_PRODUCT_ID 0xF111
57 #define MTS_EDGE_PRODUCT_ID 0xF112
58 #define MTS_MT9234MU_PRODUCT_ID 0xF114
59 #define MTS_MT9234ZBA_PRODUCT_ID 0xF115
60 #define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
61
62 /* Abbott Diabetics vendor and product ids */
63 #define ABBOTT_VENDOR_ID 0x1a61
64 #define ABBOTT_STEREO_PLUG_ID 0x3410
65 #define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID
66 #define ABBOTT_STRIP_PORT_ID 0x3420
67
68 /* Honeywell vendor and product IDs */
69 #define HONEYWELL_VENDOR_ID 0x10ac
70 #define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */
71
72 /* Moxa UPORT 11x0 vendor and product IDs */
73 #define MXU1_VENDOR_ID 0x110a
74 #define MXU1_1110_PRODUCT_ID 0x1110
75 #define MXU1_1130_PRODUCT_ID 0x1130
76 #define MXU1_1150_PRODUCT_ID 0x1150
77 #define MXU1_1151_PRODUCT_ID 0x1151
78 #define MXU1_1131_PRODUCT_ID 0x1131
79
80 /* Commands */
81 #define TI_GET_VERSION 0x01
82 #define TI_GET_PORT_STATUS 0x02
83 #define TI_GET_PORT_DEV_INFO 0x03
84 #define TI_GET_CONFIG 0x04
85 #define TI_SET_CONFIG 0x05
86 #define TI_OPEN_PORT 0x06
87 #define TI_CLOSE_PORT 0x07
88 #define TI_START_PORT 0x08
89 #define TI_STOP_PORT 0x09
90 #define TI_TEST_PORT 0x0A
91 #define TI_PURGE_PORT 0x0B
92 #define TI_RESET_EXT_DEVICE 0x0C
93 #define TI_WRITE_DATA 0x80
94 #define TI_READ_DATA 0x81
95 #define TI_REQ_TYPE_CLASS 0x82
96
97 /* Module identifiers */
98 #define TI_I2C_PORT 0x01
99 #define TI_IEEE1284_PORT 0x02
100 #define TI_UART1_PORT 0x03
101 #define TI_UART2_PORT 0x04
102 #define TI_RAM_PORT 0x05
103
104 /* Modem status */
105 #define TI_MSR_DELTA_CTS 0x01
106 #define TI_MSR_DELTA_DSR 0x02
107 #define TI_MSR_DELTA_RI 0x04
108 #define TI_MSR_DELTA_CD 0x08
109 #define TI_MSR_CTS 0x10
110 #define TI_MSR_DSR 0x20
111 #define TI_MSR_RI 0x40
112 #define TI_MSR_CD 0x80
113 #define TI_MSR_DELTA_MASK 0x0F
114 #define TI_MSR_MASK 0xF0
115
116 /* Line status */
117 #define TI_LSR_OVERRUN_ERROR 0x01
118 #define TI_LSR_PARITY_ERROR 0x02
119 #define TI_LSR_FRAMING_ERROR 0x04
120 #define TI_LSR_BREAK 0x08
121 #define TI_LSR_ERROR 0x0F
122 #define TI_LSR_RX_FULL 0x10
123 #define TI_LSR_TX_EMPTY 0x20
124
125 /* Line control */
126 #define TI_LCR_BREAK 0x40
127
128 /* Modem control */
129 #define TI_MCR_LOOP 0x04
130 #define TI_MCR_DTR 0x10
131 #define TI_MCR_RTS 0x20
132
133 /* Mask settings */
134 #define TI_UART_ENABLE_RTS_IN 0x0001
135 #define TI_UART_DISABLE_RTS 0x0002
136 #define TI_UART_ENABLE_PARITY_CHECKING 0x0008
137 #define TI_UART_ENABLE_DSR_OUT 0x0010
138 #define TI_UART_ENABLE_CTS_OUT 0x0020
139 #define TI_UART_ENABLE_X_OUT 0x0040
140 #define TI_UART_ENABLE_XA_OUT 0x0080
141 #define TI_UART_ENABLE_X_IN 0x0100
142 #define TI_UART_ENABLE_DTR_IN 0x0800
143 #define TI_UART_DISABLE_DTR 0x1000
144 #define TI_UART_ENABLE_MS_INTS 0x2000
145 #define TI_UART_ENABLE_AUTO_START_DMA 0x4000
146
147 /* Parity */
148 #define TI_UART_NO_PARITY 0x00
149 #define TI_UART_ODD_PARITY 0x01
150 #define TI_UART_EVEN_PARITY 0x02
151 #define TI_UART_MARK_PARITY 0x03
152 #define TI_UART_SPACE_PARITY 0x04
153
154 /* Stop bits */
155 #define TI_UART_1_STOP_BITS 0x00
156 #define TI_UART_1_5_STOP_BITS 0x01
157 #define TI_UART_2_STOP_BITS 0x02
158
159 /* Bits per character */
160 #define TI_UART_5_DATA_BITS 0x00
161 #define TI_UART_6_DATA_BITS 0x01
162 #define TI_UART_7_DATA_BITS 0x02
163 #define TI_UART_8_DATA_BITS 0x03
164
165 /* 232/485 modes */
166 #define TI_UART_232 0x00
167 #define TI_UART_485_RECEIVER_DISABLED 0x01
168 #define TI_UART_485_RECEIVER_ENABLED 0x02
169
170 /* Pipe transfer mode and timeout */
171 #define TI_PIPE_MODE_CONTINUOUS 0x01
172 #define TI_PIPE_MODE_MASK 0x03
173 #define TI_PIPE_TIMEOUT_MASK 0x7C
174 #define TI_PIPE_TIMEOUT_ENABLE 0x80
175
176 /* Config struct */
177 struct ti_uart_config {
178 __be16 wBaudRate;
179 __be16 wFlags;
180 u8 bDataBits;
181 u8 bParity;
182 u8 bStopBits;
183 char cXon;
184 char cXoff;
185 u8 bUartMode;
186 } __packed;
187
188 /* Get port status */
189 struct ti_port_status {
190 u8 bCmdCode;
191 u8 bModuleId;
192 u8 bErrorCode;
193 u8 bMSR;
194 u8 bLSR;
195 } __packed;
196
197 /* Purge modes */
198 #define TI_PURGE_OUTPUT 0x00
199 #define TI_PURGE_INPUT 0x80
200
201 /* Read/Write data */
202 #define TI_RW_DATA_ADDR_SFR 0x10
203 #define TI_RW_DATA_ADDR_IDATA 0x20
204 #define TI_RW_DATA_ADDR_XDATA 0x30
205 #define TI_RW_DATA_ADDR_CODE 0x40
206 #define TI_RW_DATA_ADDR_GPIO 0x50
207 #define TI_RW_DATA_ADDR_I2C 0x60
208 #define TI_RW_DATA_ADDR_FLASH 0x70
209 #define TI_RW_DATA_ADDR_DSP 0x80
210
211 #define TI_RW_DATA_UNSPECIFIED 0x00
212 #define TI_RW_DATA_BYTE 0x01
213 #define TI_RW_DATA_WORD 0x02
214 #define TI_RW_DATA_DOUBLE_WORD 0x04
215
216 struct ti_write_data_bytes {
217 u8 bAddrType;
218 u8 bDataType;
219 u8 bDataCounter;
220 __be16 wBaseAddrHi;
221 __be16 wBaseAddrLo;
222 u8 bData[0];
223 } __packed;
224
225 struct ti_read_data_request {
226 __u8 bAddrType;
227 __u8 bDataType;
228 __u8 bDataCounter;
229 __be16 wBaseAddrHi;
230 __be16 wBaseAddrLo;
231 } __packed;
232
233 struct ti_read_data_bytes {
234 __u8 bCmdCode;
235 __u8 bModuleId;
236 __u8 bErrorCode;
237 __u8 bData[0];
238 } __packed;
239
240 /* Interrupt struct */
241 struct ti_interrupt {
242 __u8 bICode;
243 __u8 bIInfo;
244 } __packed;
245
246 /* Interrupt codes */
247 #define TI_CODE_HARDWARE_ERROR 0xFF
248 #define TI_CODE_DATA_ERROR 0x03
249 #define TI_CODE_MODEM_STATUS 0x04
250
251 /* Download firmware max packet size */
252 #define TI_DOWNLOAD_MAX_PACKET_SIZE 64
253
254 /* Firmware image header */
255 struct ti_firmware_header {
256 __le16 wLength;
257 u8 bCheckSum;
258 } __packed;
259
260 /* UART addresses */
261 #define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */
262 #define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */
263 #define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */
264 #define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */
265
266 #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>"
267 #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver"
268
269 #define TI_FIRMWARE_BUF_SIZE 16284
270
271 #define TI_TRANSFER_TIMEOUT 2
272
273 #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
274
275 /* read urb states */
276 #define TI_READ_URB_RUNNING 0
277 #define TI_READ_URB_STOPPING 1
278 #define TI_READ_URB_STOPPED 2
279
280 #define TI_EXTRA_VID_PID_COUNT 5
281
282 struct ti_port {
283 int tp_is_open;
284 u8 tp_msr;
285 u8 tp_shadow_mcr;
286 u8 tp_uart_mode; /* 232 or 485 modes */
287 unsigned int tp_uart_base_addr;
288 struct ti_device *tp_tdev;
289 struct usb_serial_port *tp_port;
290 spinlock_t tp_lock;
291 int tp_read_urb_state;
292 int tp_write_urb_in_use;
293 };
294
295 struct ti_device {
296 struct mutex td_open_close_lock;
297 int td_open_port_count;
298 struct usb_serial *td_serial;
299 int td_is_3410;
300 bool td_rs485_only;
301 };
302
303 static int ti_startup(struct usb_serial *serial);
304 static void ti_release(struct usb_serial *serial);
305 static int ti_port_probe(struct usb_serial_port *port);
306 static int ti_port_remove(struct usb_serial_port *port);
307 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
308 static void ti_close(struct usb_serial_port *port);
309 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
310 const unsigned char *data, int count);
311 static int ti_write_room(struct tty_struct *tty);
312 static int ti_chars_in_buffer(struct tty_struct *tty);
313 static bool ti_tx_empty(struct usb_serial_port *port);
314 static void ti_throttle(struct tty_struct *tty);
315 static void ti_unthrottle(struct tty_struct *tty);
316 static void ti_set_termios(struct tty_struct *tty,
317 struct usb_serial_port *port, struct ktermios *old_termios);
318 static int ti_tiocmget(struct tty_struct *tty);
319 static int ti_tiocmset(struct tty_struct *tty,
320 unsigned int set, unsigned int clear);
321 static void ti_break(struct tty_struct *tty, int break_state);
322 static void ti_interrupt_callback(struct urb *urb);
323 static void ti_bulk_in_callback(struct urb *urb);
324 static void ti_bulk_out_callback(struct urb *urb);
325
326 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
327 int length);
328 static void ti_send(struct ti_port *tport);
329 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
330 static int ti_get_lsr(struct ti_port *tport, u8 *lsr);
331 static int ti_get_serial_info(struct tty_struct *tty,
332 struct serial_struct *ss);
333 static int ti_set_serial_info(struct tty_struct *tty,
334 struct serial_struct *ss);
335 static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
336
337 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
338 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
339
340 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
341 __u16 moduleid, __u16 value, __u8 *data, int size);
342 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
343 __u16 moduleid, __u16 value, __u8 *data, int size);
344
345 static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
346 unsigned long addr, u8 mask, u8 byte);
347
348 static int ti_download_firmware(struct ti_device *tdev);
349
350 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
351
352 static const struct usb_device_id ti_id_table_3410[] = {
353 { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
354 { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
355 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
356 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
357 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
358 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
359 { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
360 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
361 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
362 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
363 { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
364 { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
365 { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
366 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
367 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
368 { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
369 { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
370 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
371 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
372 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
373 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
374 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
375 { } /* terminator */
376 };
377
378 static const struct usb_device_id ti_id_table_5052[] = {
379 { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
380 { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
381 { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
382 { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
383 { }
384 };
385
386 static const struct usb_device_id ti_id_table_combined[] = {
387 { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
388 { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
389 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
390 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
391 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
392 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
393 { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
394 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
395 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
396 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
397 { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
398 { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
399 { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
400 { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
401 { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
402 { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
403 { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
404 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
405 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
406 { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
407 { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
408 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
409 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
410 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
411 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
412 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
413 { } /* terminator */
414 };
415
416 static struct usb_serial_driver ti_1port_device = {
417 .driver = {
418 .owner = THIS_MODULE,
419 .name = "ti_usb_3410_5052_1",
420 },
421 .description = "TI USB 3410 1 port adapter",
422 .id_table = ti_id_table_3410,
423 .num_ports = 1,
424 .num_bulk_out = 1,
425 .attach = ti_startup,
426 .release = ti_release,
427 .port_probe = ti_port_probe,
428 .port_remove = ti_port_remove,
429 .open = ti_open,
430 .close = ti_close,
431 .write = ti_write,
432 .write_room = ti_write_room,
433 .chars_in_buffer = ti_chars_in_buffer,
434 .tx_empty = ti_tx_empty,
435 .throttle = ti_throttle,
436 .unthrottle = ti_unthrottle,
437 .get_serial = ti_get_serial_info,
438 .set_serial = ti_set_serial_info,
439 .set_termios = ti_set_termios,
440 .tiocmget = ti_tiocmget,
441 .tiocmset = ti_tiocmset,
442 .tiocmiwait = usb_serial_generic_tiocmiwait,
443 .get_icount = usb_serial_generic_get_icount,
444 .break_ctl = ti_break,
445 .read_int_callback = ti_interrupt_callback,
446 .read_bulk_callback = ti_bulk_in_callback,
447 .write_bulk_callback = ti_bulk_out_callback,
448 };
449
450 static struct usb_serial_driver ti_2port_device = {
451 .driver = {
452 .owner = THIS_MODULE,
453 .name = "ti_usb_3410_5052_2",
454 },
455 .description = "TI USB 5052 2 port adapter",
456 .id_table = ti_id_table_5052,
457 .num_ports = 2,
458 .num_bulk_out = 1,
459 .attach = ti_startup,
460 .release = ti_release,
461 .port_probe = ti_port_probe,
462 .port_remove = ti_port_remove,
463 .open = ti_open,
464 .close = ti_close,
465 .write = ti_write,
466 .write_room = ti_write_room,
467 .chars_in_buffer = ti_chars_in_buffer,
468 .tx_empty = ti_tx_empty,
469 .throttle = ti_throttle,
470 .unthrottle = ti_unthrottle,
471 .get_serial = ti_get_serial_info,
472 .set_serial = ti_set_serial_info,
473 .set_termios = ti_set_termios,
474 .tiocmget = ti_tiocmget,
475 .tiocmset = ti_tiocmset,
476 .tiocmiwait = usb_serial_generic_tiocmiwait,
477 .get_icount = usb_serial_generic_get_icount,
478 .break_ctl = ti_break,
479 .read_int_callback = ti_interrupt_callback,
480 .read_bulk_callback = ti_bulk_in_callback,
481 .write_bulk_callback = ti_bulk_out_callback,
482 };
483
484 static struct usb_serial_driver * const serial_drivers[] = {
485 &ti_1port_device, &ti_2port_device, NULL
486 };
487
488 MODULE_AUTHOR(TI_DRIVER_AUTHOR);
489 MODULE_DESCRIPTION(TI_DRIVER_DESC);
490 MODULE_LICENSE("GPL");
491
492 MODULE_FIRMWARE("ti_3410.fw");
493 MODULE_FIRMWARE("ti_5052.fw");
494 MODULE_FIRMWARE("mts_cdma.fw");
495 MODULE_FIRMWARE("mts_gsm.fw");
496 MODULE_FIRMWARE("mts_edge.fw");
497 MODULE_FIRMWARE("mts_mt9234mu.fw");
498 MODULE_FIRMWARE("mts_mt9234zba.fw");
499 MODULE_FIRMWARE("moxa/moxa-1110.fw");
500 MODULE_FIRMWARE("moxa/moxa-1130.fw");
501 MODULE_FIRMWARE("moxa/moxa-1131.fw");
502 MODULE_FIRMWARE("moxa/moxa-1150.fw");
503 MODULE_FIRMWARE("moxa/moxa-1151.fw");
504
505 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
506 MODULE_PARM_DESC(closing_wait,
507 "Maximum wait for data to drain in close, in .01 secs, default is 4000");
508
509 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
510
511 module_usb_serial_driver(serial_drivers, ti_id_table_combined);
512
513 static int ti_startup(struct usb_serial *serial)
514 {
515 struct ti_device *tdev;
516 struct usb_device *dev = serial->dev;
517 struct usb_host_interface *cur_altsetting;
518 int num_endpoints;
519 u16 vid, pid;
520 int status;
521
522 dev_dbg(&dev->dev,
523 "%s - product 0x%4X, num configurations %d, configuration value %d\n",
524 __func__, le16_to_cpu(dev->descriptor.idProduct),
525 dev->descriptor.bNumConfigurations,
526 dev->actconfig->desc.bConfigurationValue);
527
528 tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
529 if (!tdev)
530 return -ENOMEM;
531
532 mutex_init(&tdev->td_open_close_lock);
533 tdev->td_serial = serial;
534 usb_set_serial_data(serial, tdev);
535
536 /* determine device type */
537 if (serial->type == &ti_1port_device)
538 tdev->td_is_3410 = 1;
539 dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
540 tdev->td_is_3410 ? "3410" : "5052");
541
542 vid = le16_to_cpu(dev->descriptor.idVendor);
543 pid = le16_to_cpu(dev->descriptor.idProduct);
544 if (vid == MXU1_VENDOR_ID) {
545 switch (pid) {
546 case MXU1_1130_PRODUCT_ID:
547 case MXU1_1131_PRODUCT_ID:
548 tdev->td_rs485_only = true;
549 break;
550 }
551 }
552
553 cur_altsetting = serial->interface->cur_altsetting;
554 num_endpoints = cur_altsetting->desc.bNumEndpoints;
555
556 /* if we have only 1 configuration and 1 endpoint, download firmware */
557 if (dev->descriptor.bNumConfigurations == 1 && num_endpoints == 1) {
558 status = ti_download_firmware(tdev);
559
560 if (status != 0)
561 goto free_tdev;
562
563 /* 3410 must be reset, 5052 resets itself */
564 if (tdev->td_is_3410) {
565 msleep_interruptible(100);
566 usb_reset_device(dev);
567 }
568
569 status = -ENODEV;
570 goto free_tdev;
571 }
572
573 /* the second configuration must be set */
574 if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
575 status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
576 status = status ? status : -ENODEV;
577 goto free_tdev;
578 }
579
580 if (serial->num_bulk_in < serial->num_ports ||
581 serial->num_bulk_out < serial->num_ports) {
582 dev_err(&serial->interface->dev, "missing endpoints\n");
583 status = -ENODEV;
584 goto free_tdev;
585 }
586
587 return 0;
588
589 free_tdev:
590 kfree(tdev);
591 usb_set_serial_data(serial, NULL);
592 return status;
593 }
594
595
596 static void ti_release(struct usb_serial *serial)
597 {
598 struct ti_device *tdev = usb_get_serial_data(serial);
599
600 kfree(tdev);
601 }
602
603 static int ti_port_probe(struct usb_serial_port *port)
604 {
605 struct ti_port *tport;
606
607 tport = kzalloc(sizeof(*tport), GFP_KERNEL);
608 if (!tport)
609 return -ENOMEM;
610
611 spin_lock_init(&tport->tp_lock);
612 if (port == port->serial->port[0])
613 tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
614 else
615 tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
616 port->port.closing_wait = msecs_to_jiffies(10 * closing_wait);
617 tport->tp_port = port;
618 tport->tp_tdev = usb_get_serial_data(port->serial);
619
620 if (tport->tp_tdev->td_rs485_only)
621 tport->tp_uart_mode = TI_UART_485_RECEIVER_DISABLED;
622 else
623 tport->tp_uart_mode = TI_UART_232;
624
625 usb_set_serial_port_data(port, tport);
626
627 port->port.drain_delay = 3;
628
629 return 0;
630 }
631
632 static int ti_port_remove(struct usb_serial_port *port)
633 {
634 struct ti_port *tport;
635
636 tport = usb_get_serial_port_data(port);
637 kfree(tport);
638
639 return 0;
640 }
641
642 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
643 {
644 struct ti_port *tport = usb_get_serial_port_data(port);
645 struct ti_device *tdev;
646 struct usb_device *dev;
647 struct urb *urb;
648 int port_number;
649 int status;
650 u16 open_settings;
651
652 open_settings = (TI_PIPE_MODE_CONTINUOUS |
653 TI_PIPE_TIMEOUT_ENABLE |
654 (TI_TRANSFER_TIMEOUT << 2));
655
656 dev = port->serial->dev;
657 tdev = tport->tp_tdev;
658
659 /* only one open on any port on a device at a time */
660 if (mutex_lock_interruptible(&tdev->td_open_close_lock))
661 return -ERESTARTSYS;
662
663 port_number = port->port_number;
664
665 tport->tp_msr = 0;
666 tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
667
668 /* start interrupt urb the first time a port is opened on this device */
669 if (tdev->td_open_port_count == 0) {
670 dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__);
671 urb = tdev->td_serial->port[0]->interrupt_in_urb;
672 if (!urb) {
673 dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
674 status = -EINVAL;
675 goto release_lock;
676 }
677 urb->context = tdev;
678 status = usb_submit_urb(urb, GFP_KERNEL);
679 if (status) {
680 dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
681 goto release_lock;
682 }
683 }
684
685 if (tty)
686 ti_set_termios(tty, port, &tty->termios);
687
688 status = ti_command_out_sync(tdev, TI_OPEN_PORT,
689 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
690 if (status) {
691 dev_err(&port->dev, "%s - cannot send open command, %d\n",
692 __func__, status);
693 goto unlink_int_urb;
694 }
695
696 status = ti_command_out_sync(tdev, TI_START_PORT,
697 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
698 if (status) {
699 dev_err(&port->dev, "%s - cannot send start command, %d\n",
700 __func__, status);
701 goto unlink_int_urb;
702 }
703
704 status = ti_command_out_sync(tdev, TI_PURGE_PORT,
705 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
706 if (status) {
707 dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
708 __func__, status);
709 goto unlink_int_urb;
710 }
711 status = ti_command_out_sync(tdev, TI_PURGE_PORT,
712 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
713 if (status) {
714 dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
715 __func__, status);
716 goto unlink_int_urb;
717 }
718
719 /* reset the data toggle on the bulk endpoints to work around bug in
720 * host controllers where things get out of sync some times */
721 usb_clear_halt(dev, port->write_urb->pipe);
722 usb_clear_halt(dev, port->read_urb->pipe);
723
724 if (tty)
725 ti_set_termios(tty, port, &tty->termios);
726
727 status = ti_command_out_sync(tdev, TI_OPEN_PORT,
728 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
729 if (status) {
730 dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
731 __func__, status);
732 goto unlink_int_urb;
733 }
734
735 status = ti_command_out_sync(tdev, TI_START_PORT,
736 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
737 if (status) {
738 dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
739 __func__, status);
740 goto unlink_int_urb;
741 }
742
743 /* start read urb */
744 urb = port->read_urb;
745 if (!urb) {
746 dev_err(&port->dev, "%s - no read urb\n", __func__);
747 status = -EINVAL;
748 goto unlink_int_urb;
749 }
750 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
751 urb->context = tport;
752 status = usb_submit_urb(urb, GFP_KERNEL);
753 if (status) {
754 dev_err(&port->dev, "%s - submit read urb failed, %d\n",
755 __func__, status);
756 goto unlink_int_urb;
757 }
758
759 tport->tp_is_open = 1;
760 ++tdev->td_open_port_count;
761
762 goto release_lock;
763
764 unlink_int_urb:
765 if (tdev->td_open_port_count == 0)
766 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
767 release_lock:
768 mutex_unlock(&tdev->td_open_close_lock);
769 return status;
770 }
771
772
773 static void ti_close(struct usb_serial_port *port)
774 {
775 struct ti_device *tdev;
776 struct ti_port *tport;
777 int port_number;
778 int status;
779 int do_unlock;
780 unsigned long flags;
781
782 tdev = usb_get_serial_data(port->serial);
783 tport = usb_get_serial_port_data(port);
784
785 tport->tp_is_open = 0;
786
787 usb_kill_urb(port->read_urb);
788 usb_kill_urb(port->write_urb);
789 tport->tp_write_urb_in_use = 0;
790 spin_lock_irqsave(&tport->tp_lock, flags);
791 kfifo_reset_out(&port->write_fifo);
792 spin_unlock_irqrestore(&tport->tp_lock, flags);
793
794 port_number = port->port_number;
795
796 status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
797 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
798 if (status)
799 dev_err(&port->dev,
800 "%s - cannot send close port command, %d\n"
801 , __func__, status);
802
803 /* if mutex_lock is interrupted, continue anyway */
804 do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock);
805 --tport->tp_tdev->td_open_port_count;
806 if (tport->tp_tdev->td_open_port_count <= 0) {
807 /* last port is closed, shut down interrupt urb */
808 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
809 tport->tp_tdev->td_open_port_count = 0;
810 }
811 if (do_unlock)
812 mutex_unlock(&tdev->td_open_close_lock);
813 }
814
815
816 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
817 const unsigned char *data, int count)
818 {
819 struct ti_port *tport = usb_get_serial_port_data(port);
820
821 if (count == 0) {
822 return 0;
823 }
824
825 if (!tport->tp_is_open)
826 return -ENODEV;
827
828 count = kfifo_in_locked(&port->write_fifo, data, count,
829 &tport->tp_lock);
830 ti_send(tport);
831
832 return count;
833 }
834
835
836 static int ti_write_room(struct tty_struct *tty)
837 {
838 struct usb_serial_port *port = tty->driver_data;
839 struct ti_port *tport = usb_get_serial_port_data(port);
840 int room = 0;
841 unsigned long flags;
842
843 spin_lock_irqsave(&tport->tp_lock, flags);
844 room = kfifo_avail(&port->write_fifo);
845 spin_unlock_irqrestore(&tport->tp_lock, flags);
846
847 dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
848 return room;
849 }
850
851
852 static int ti_chars_in_buffer(struct tty_struct *tty)
853 {
854 struct usb_serial_port *port = tty->driver_data;
855 struct ti_port *tport = usb_get_serial_port_data(port);
856 int chars = 0;
857 unsigned long flags;
858
859 spin_lock_irqsave(&tport->tp_lock, flags);
860 chars = kfifo_len(&port->write_fifo);
861 spin_unlock_irqrestore(&tport->tp_lock, flags);
862
863 dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
864 return chars;
865 }
866
867 static bool ti_tx_empty(struct usb_serial_port *port)
868 {
869 struct ti_port *tport = usb_get_serial_port_data(port);
870 int ret;
871 u8 lsr;
872
873 ret = ti_get_lsr(tport, &lsr);
874 if (!ret && !(lsr & TI_LSR_TX_EMPTY))
875 return false;
876
877 return true;
878 }
879
880 static void ti_throttle(struct tty_struct *tty)
881 {
882 struct usb_serial_port *port = tty->driver_data;
883 struct ti_port *tport = usb_get_serial_port_data(port);
884
885 if (I_IXOFF(tty) || C_CRTSCTS(tty))
886 ti_stop_read(tport, tty);
887
888 }
889
890
891 static void ti_unthrottle(struct tty_struct *tty)
892 {
893 struct usb_serial_port *port = tty->driver_data;
894 struct ti_port *tport = usb_get_serial_port_data(port);
895 int status;
896
897 if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
898 status = ti_restart_read(tport, tty);
899 if (status)
900 dev_err(&port->dev, "%s - cannot restart read, %d\n",
901 __func__, status);
902 }
903 }
904
905 static void ti_set_termios(struct tty_struct *tty,
906 struct usb_serial_port *port, struct ktermios *old_termios)
907 {
908 struct ti_port *tport = usb_get_serial_port_data(port);
909 struct ti_uart_config *config;
910 int baud;
911 int status;
912 int port_number = port->port_number;
913 unsigned int mcr;
914 u16 wbaudrate;
915 u16 wflags = 0;
916
917 config = kmalloc(sizeof(*config), GFP_KERNEL);
918 if (!config)
919 return;
920
921 /* these flags must be set */
922 wflags |= TI_UART_ENABLE_MS_INTS;
923 wflags |= TI_UART_ENABLE_AUTO_START_DMA;
924 config->bUartMode = tport->tp_uart_mode;
925
926 switch (C_CSIZE(tty)) {
927 case CS5:
928 config->bDataBits = TI_UART_5_DATA_BITS;
929 break;
930 case CS6:
931 config->bDataBits = TI_UART_6_DATA_BITS;
932 break;
933 case CS7:
934 config->bDataBits = TI_UART_7_DATA_BITS;
935 break;
936 default:
937 case CS8:
938 config->bDataBits = TI_UART_8_DATA_BITS;
939 break;
940 }
941
942 /* CMSPAR isn't supported by this driver */
943 tty->termios.c_cflag &= ~CMSPAR;
944
945 if (C_PARENB(tty)) {
946 if (C_PARODD(tty)) {
947 wflags |= TI_UART_ENABLE_PARITY_CHECKING;
948 config->bParity = TI_UART_ODD_PARITY;
949 } else {
950 wflags |= TI_UART_ENABLE_PARITY_CHECKING;
951 config->bParity = TI_UART_EVEN_PARITY;
952 }
953 } else {
954 wflags &= ~TI_UART_ENABLE_PARITY_CHECKING;
955 config->bParity = TI_UART_NO_PARITY;
956 }
957
958 if (C_CSTOPB(tty))
959 config->bStopBits = TI_UART_2_STOP_BITS;
960 else
961 config->bStopBits = TI_UART_1_STOP_BITS;
962
963 if (C_CRTSCTS(tty)) {
964 /* RTS flow control must be off to drop RTS for baud rate B0 */
965 if ((C_BAUD(tty)) != B0)
966 wflags |= TI_UART_ENABLE_RTS_IN;
967 wflags |= TI_UART_ENABLE_CTS_OUT;
968 } else {
969 ti_restart_read(tport, tty);
970 }
971
972 if (I_IXOFF(tty) || I_IXON(tty)) {
973 config->cXon = START_CHAR(tty);
974 config->cXoff = STOP_CHAR(tty);
975
976 if (I_IXOFF(tty))
977 wflags |= TI_UART_ENABLE_X_IN;
978 else
979 ti_restart_read(tport, tty);
980
981 if (I_IXON(tty))
982 wflags |= TI_UART_ENABLE_X_OUT;
983 }
984
985 baud = tty_get_baud_rate(tty);
986 if (!baud)
987 baud = 9600;
988 if (tport->tp_tdev->td_is_3410)
989 wbaudrate = (923077 + baud/2) / baud;
990 else
991 wbaudrate = (461538 + baud/2) / baud;
992
993 /* FIXME: Should calculate resulting baud here and report it back */
994 if ((C_BAUD(tty)) != B0)
995 tty_encode_baud_rate(tty, baud, baud);
996
997 dev_dbg(&port->dev,
998 "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
999 __func__, baud, wbaudrate, wflags,
1000 config->bDataBits, config->bParity, config->bStopBits,
1001 config->cXon, config->cXoff, config->bUartMode);
1002
1003 config->wBaudRate = cpu_to_be16(wbaudrate);
1004 config->wFlags = cpu_to_be16(wflags);
1005
1006 status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
1007 (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
1008 sizeof(*config));
1009 if (status)
1010 dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
1011 __func__, port_number, status);
1012
1013 /* SET_CONFIG asserts RTS and DTR, reset them correctly */
1014 mcr = tport->tp_shadow_mcr;
1015 /* if baud rate is B0, clear RTS and DTR */
1016 if (C_BAUD(tty) == B0)
1017 mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
1018 status = ti_set_mcr(tport, mcr);
1019 if (status)
1020 dev_err(&port->dev,
1021 "%s - cannot set modem control on port %d, %d\n",
1022 __func__, port_number, status);
1023
1024 kfree(config);
1025 }
1026
1027
1028 static int ti_tiocmget(struct tty_struct *tty)
1029 {
1030 struct usb_serial_port *port = tty->driver_data;
1031 struct ti_port *tport = usb_get_serial_port_data(port);
1032 unsigned int result;
1033 unsigned int msr;
1034 unsigned int mcr;
1035 unsigned long flags;
1036
1037 spin_lock_irqsave(&tport->tp_lock, flags);
1038 msr = tport->tp_msr;
1039 mcr = tport->tp_shadow_mcr;
1040 spin_unlock_irqrestore(&tport->tp_lock, flags);
1041
1042 result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1043 | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1044 | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1045 | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1046 | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1047 | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1048 | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1049
1050 dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
1051
1052 return result;
1053 }
1054
1055
1056 static int ti_tiocmset(struct tty_struct *tty,
1057 unsigned int set, unsigned int clear)
1058 {
1059 struct usb_serial_port *port = tty->driver_data;
1060 struct ti_port *tport = usb_get_serial_port_data(port);
1061 unsigned int mcr;
1062 unsigned long flags;
1063
1064 spin_lock_irqsave(&tport->tp_lock, flags);
1065 mcr = tport->tp_shadow_mcr;
1066
1067 if (set & TIOCM_RTS)
1068 mcr |= TI_MCR_RTS;
1069 if (set & TIOCM_DTR)
1070 mcr |= TI_MCR_DTR;
1071 if (set & TIOCM_LOOP)
1072 mcr |= TI_MCR_LOOP;
1073
1074 if (clear & TIOCM_RTS)
1075 mcr &= ~TI_MCR_RTS;
1076 if (clear & TIOCM_DTR)
1077 mcr &= ~TI_MCR_DTR;
1078 if (clear & TIOCM_LOOP)
1079 mcr &= ~TI_MCR_LOOP;
1080 spin_unlock_irqrestore(&tport->tp_lock, flags);
1081
1082 return ti_set_mcr(tport, mcr);
1083 }
1084
1085
1086 static void ti_break(struct tty_struct *tty, int break_state)
1087 {
1088 struct usb_serial_port *port = tty->driver_data;
1089 struct ti_port *tport = usb_get_serial_port_data(port);
1090 int status;
1091
1092 dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
1093
1094 status = ti_write_byte(port, tport->tp_tdev,
1095 tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1096 TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1097
1098 if (status)
1099 dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status);
1100 }
1101
1102 static int ti_get_port_from_code(unsigned char code)
1103 {
1104 return (code >> 6) & 0x01;
1105 }
1106
1107 static int ti_get_func_from_code(unsigned char code)
1108 {
1109 return code & 0x0f;
1110 }
1111
1112 static void ti_interrupt_callback(struct urb *urb)
1113 {
1114 struct ti_device *tdev = urb->context;
1115 struct usb_serial_port *port;
1116 struct usb_serial *serial = tdev->td_serial;
1117 struct ti_port *tport;
1118 struct device *dev = &urb->dev->dev;
1119 unsigned char *data = urb->transfer_buffer;
1120 int length = urb->actual_length;
1121 int port_number;
1122 int function;
1123 int status = urb->status;
1124 int retval;
1125 u8 msr;
1126
1127 switch (status) {
1128 case 0:
1129 break;
1130 case -ECONNRESET:
1131 case -ENOENT:
1132 case -ESHUTDOWN:
1133 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1134 return;
1135 default:
1136 dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status);
1137 goto exit;
1138 }
1139
1140 if (length != 2) {
1141 dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length);
1142 goto exit;
1143 }
1144
1145 if (data[0] == TI_CODE_HARDWARE_ERROR) {
1146 dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
1147 goto exit;
1148 }
1149
1150 port_number = ti_get_port_from_code(data[0]);
1151 function = ti_get_func_from_code(data[0]);
1152
1153 dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n",
1154 __func__, port_number, function, data[1]);
1155
1156 if (port_number >= serial->num_ports) {
1157 dev_err(dev, "%s - bad port number, %d\n",
1158 __func__, port_number);
1159 goto exit;
1160 }
1161
1162 port = serial->port[port_number];
1163
1164 tport = usb_get_serial_port_data(port);
1165 if (!tport)
1166 goto exit;
1167
1168 switch (function) {
1169 case TI_CODE_DATA_ERROR:
1170 dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
1171 __func__, port_number, data[1]);
1172 break;
1173
1174 case TI_CODE_MODEM_STATUS:
1175 msr = data[1];
1176 dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr);
1177 ti_handle_new_msr(tport, msr);
1178 break;
1179
1180 default:
1181 dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
1182 __func__, data[1]);
1183 break;
1184 }
1185
1186 exit:
1187 retval = usb_submit_urb(urb, GFP_ATOMIC);
1188 if (retval)
1189 dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
1190 __func__, retval);
1191 }
1192
1193
1194 static void ti_bulk_in_callback(struct urb *urb)
1195 {
1196 struct ti_port *tport = urb->context;
1197 struct usb_serial_port *port = tport->tp_port;
1198 struct device *dev = &urb->dev->dev;
1199 int status = urb->status;
1200 unsigned long flags;
1201 int retval = 0;
1202
1203 switch (status) {
1204 case 0:
1205 break;
1206 case -ECONNRESET:
1207 case -ENOENT:
1208 case -ESHUTDOWN:
1209 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1210 return;
1211 default:
1212 dev_err(dev, "%s - nonzero urb status, %d\n",
1213 __func__, status);
1214 }
1215
1216 if (status == -EPIPE)
1217 goto exit;
1218
1219 if (status) {
1220 dev_err(dev, "%s - stopping read!\n", __func__);
1221 return;
1222 }
1223
1224 if (urb->actual_length) {
1225 usb_serial_debug_data(dev, __func__, urb->actual_length,
1226 urb->transfer_buffer);
1227
1228 if (!tport->tp_is_open)
1229 dev_dbg(dev, "%s - port closed, dropping data\n",
1230 __func__);
1231 else
1232 ti_recv(port, urb->transfer_buffer, urb->actual_length);
1233 spin_lock_irqsave(&tport->tp_lock, flags);
1234 port->icount.rx += urb->actual_length;
1235 spin_unlock_irqrestore(&tport->tp_lock, flags);
1236 }
1237
1238 exit:
1239 /* continue to read unless stopping */
1240 spin_lock_irqsave(&tport->tp_lock, flags);
1241 if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1242 retval = usb_submit_urb(urb, GFP_ATOMIC);
1243 else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
1244 tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1245
1246 spin_unlock_irqrestore(&tport->tp_lock, flags);
1247 if (retval)
1248 dev_err(dev, "%s - resubmit read urb failed, %d\n",
1249 __func__, retval);
1250 }
1251
1252
1253 static void ti_bulk_out_callback(struct urb *urb)
1254 {
1255 struct ti_port *tport = urb->context;
1256 struct usb_serial_port *port = tport->tp_port;
1257 int status = urb->status;
1258
1259 tport->tp_write_urb_in_use = 0;
1260
1261 switch (status) {
1262 case 0:
1263 break;
1264 case -ECONNRESET:
1265 case -ENOENT:
1266 case -ESHUTDOWN:
1267 dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status);
1268 return;
1269 default:
1270 dev_err_console(port, "%s - nonzero urb status, %d\n",
1271 __func__, status);
1272 }
1273
1274 /* send any buffered data */
1275 ti_send(tport);
1276 }
1277
1278
1279 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
1280 int length)
1281 {
1282 int cnt;
1283
1284 do {
1285 cnt = tty_insert_flip_string(&port->port, data, length);
1286 if (cnt < length) {
1287 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1288 __func__, length - cnt);
1289 if (cnt == 0)
1290 break;
1291 }
1292 tty_flip_buffer_push(&port->port);
1293 data += cnt;
1294 length -= cnt;
1295 } while (length > 0);
1296 }
1297
1298
1299 static void ti_send(struct ti_port *tport)
1300 {
1301 int count, result;
1302 struct usb_serial_port *port = tport->tp_port;
1303 unsigned long flags;
1304
1305 spin_lock_irqsave(&tport->tp_lock, flags);
1306
1307 if (tport->tp_write_urb_in_use)
1308 goto unlock;
1309
1310 count = kfifo_out(&port->write_fifo,
1311 port->write_urb->transfer_buffer,
1312 port->bulk_out_size);
1313
1314 if (count == 0)
1315 goto unlock;
1316
1317 tport->tp_write_urb_in_use = 1;
1318
1319 spin_unlock_irqrestore(&tport->tp_lock, flags);
1320
1321 usb_serial_debug_data(&port->dev, __func__, count,
1322 port->write_urb->transfer_buffer);
1323
1324 usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1325 usb_sndbulkpipe(port->serial->dev,
1326 port->bulk_out_endpointAddress),
1327 port->write_urb->transfer_buffer, count,
1328 ti_bulk_out_callback, tport);
1329
1330 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1331 if (result) {
1332 dev_err_console(port, "%s - submit write urb failed, %d\n",
1333 __func__, result);
1334 tport->tp_write_urb_in_use = 0;
1335 /* TODO: reschedule ti_send */
1336 } else {
1337 spin_lock_irqsave(&tport->tp_lock, flags);
1338 port->icount.tx += count;
1339 spin_unlock_irqrestore(&tport->tp_lock, flags);
1340 }
1341
1342 /* more room in the buffer for new writes, wakeup */
1343 tty_port_tty_wakeup(&port->port);
1344
1345 return;
1346 unlock:
1347 spin_unlock_irqrestore(&tport->tp_lock, flags);
1348 return;
1349 }
1350
1351
1352 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1353 {
1354 unsigned long flags;
1355 int status;
1356
1357 status = ti_write_byte(tport->tp_port, tport->tp_tdev,
1358 tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1359 TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1360
1361 spin_lock_irqsave(&tport->tp_lock, flags);
1362 if (!status)
1363 tport->tp_shadow_mcr = mcr;
1364 spin_unlock_irqrestore(&tport->tp_lock, flags);
1365
1366 return status;
1367 }
1368
1369
1370 static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
1371 {
1372 int size, status;
1373 struct ti_device *tdev = tport->tp_tdev;
1374 struct usb_serial_port *port = tport->tp_port;
1375 int port_number = port->port_number;
1376 struct ti_port_status *data;
1377
1378 size = sizeof(struct ti_port_status);
1379 data = kmalloc(size, GFP_KERNEL);
1380 if (!data)
1381 return -ENOMEM;
1382
1383 status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
1384 (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
1385 if (status) {
1386 dev_err(&port->dev,
1387 "%s - get port status command failed, %d\n",
1388 __func__, status);
1389 goto free_data;
1390 }
1391
1392 dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR);
1393
1394 *lsr = data->bLSR;
1395
1396 free_data:
1397 kfree(data);
1398 return status;
1399 }
1400
1401
1402 static int ti_get_serial_info(struct tty_struct *tty,
1403 struct serial_struct *ss)
1404 {
1405 struct usb_serial_port *port = tty->driver_data;
1406 struct ti_port *tport = usb_get_serial_port_data(port);
1407 unsigned cwait;
1408
1409 cwait = port->port.closing_wait;
1410 if (cwait != ASYNC_CLOSING_WAIT_NONE)
1411 cwait = jiffies_to_msecs(cwait) / 10;
1412
1413 ss->type = PORT_16550A;
1414 ss->line = port->minor;
1415 ss->port = port->port_number;
1416 ss->xmit_fifo_size = kfifo_size(&port->write_fifo);
1417 ss->baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1418 ss->closing_wait = cwait;
1419 return 0;
1420 }
1421
1422
1423 static int ti_set_serial_info(struct tty_struct *tty,
1424 struct serial_struct *ss)
1425 {
1426 struct usb_serial_port *port = tty->driver_data;
1427 struct ti_port *tport = usb_get_serial_port_data(port);
1428 unsigned cwait;
1429
1430 cwait = ss->closing_wait;
1431 if (cwait != ASYNC_CLOSING_WAIT_NONE)
1432 cwait = msecs_to_jiffies(10 * ss->closing_wait);
1433
1434 tport->tp_port->port.closing_wait = cwait;
1435
1436 return 0;
1437 }
1438
1439
1440 static void ti_handle_new_msr(struct ti_port *tport, u8 msr)
1441 {
1442 struct async_icount *icount;
1443 struct tty_struct *tty;
1444 unsigned long flags;
1445
1446 dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr);
1447
1448 if (msr & TI_MSR_DELTA_MASK) {
1449 spin_lock_irqsave(&tport->tp_lock, flags);
1450 icount = &tport->tp_port->icount;
1451 if (msr & TI_MSR_DELTA_CTS)
1452 icount->cts++;
1453 if (msr & TI_MSR_DELTA_DSR)
1454 icount->dsr++;
1455 if (msr & TI_MSR_DELTA_CD)
1456 icount->dcd++;
1457 if (msr & TI_MSR_DELTA_RI)
1458 icount->rng++;
1459 wake_up_interruptible(&tport->tp_port->port.delta_msr_wait);
1460 spin_unlock_irqrestore(&tport->tp_lock, flags);
1461 }
1462
1463 tport->tp_msr = msr & TI_MSR_MASK;
1464
1465 /* handle CTS flow control */
1466 tty = tty_port_tty_get(&tport->tp_port->port);
1467 if (tty && C_CRTSCTS(tty)) {
1468 if (msr & TI_MSR_CTS)
1469 tty_wakeup(tty);
1470 }
1471 tty_kref_put(tty);
1472 }
1473
1474
1475 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1476 {
1477 unsigned long flags;
1478
1479 spin_lock_irqsave(&tport->tp_lock, flags);
1480
1481 if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1482 tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1483
1484 spin_unlock_irqrestore(&tport->tp_lock, flags);
1485 }
1486
1487
1488 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1489 {
1490 struct urb *urb;
1491 int status = 0;
1492 unsigned long flags;
1493
1494 spin_lock_irqsave(&tport->tp_lock, flags);
1495
1496 if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1497 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1498 urb = tport->tp_port->read_urb;
1499 spin_unlock_irqrestore(&tport->tp_lock, flags);
1500 urb->context = tport;
1501 status = usb_submit_urb(urb, GFP_KERNEL);
1502 } else {
1503 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1504 spin_unlock_irqrestore(&tport->tp_lock, flags);
1505 }
1506
1507 return status;
1508 }
1509
1510
1511 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
1512 __u16 moduleid, __u16 value, __u8 *data, int size)
1513 {
1514 int status;
1515
1516 status = usb_control_msg(tdev->td_serial->dev,
1517 usb_sndctrlpipe(tdev->td_serial->dev, 0), command,
1518 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
1519 value, moduleid, data, size, 1000);
1520
1521 if (status < 0)
1522 return status;
1523
1524 return 0;
1525 }
1526
1527
1528 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
1529 __u16 moduleid, __u16 value, __u8 *data, int size)
1530 {
1531 int status;
1532
1533 status = usb_control_msg(tdev->td_serial->dev,
1534 usb_rcvctrlpipe(tdev->td_serial->dev, 0), command,
1535 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
1536 value, moduleid, data, size, 1000);
1537
1538 if (status == size)
1539 status = 0;
1540 else if (status >= 0)
1541 status = -ECOMM;
1542
1543 return status;
1544 }
1545
1546
1547 static int ti_write_byte(struct usb_serial_port *port,
1548 struct ti_device *tdev, unsigned long addr,
1549 u8 mask, u8 byte)
1550 {
1551 int status;
1552 unsigned int size;
1553 struct ti_write_data_bytes *data;
1554
1555 dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__,
1556 addr, mask, byte);
1557
1558 size = sizeof(struct ti_write_data_bytes) + 2;
1559 data = kmalloc(size, GFP_KERNEL);
1560 if (!data)
1561 return -ENOMEM;
1562
1563 data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1564 data->bDataType = TI_RW_DATA_BYTE;
1565 data->bDataCounter = 1;
1566 data->wBaseAddrHi = cpu_to_be16(addr>>16);
1567 data->wBaseAddrLo = cpu_to_be16(addr);
1568 data->bData[0] = mask;
1569 data->bData[1] = byte;
1570
1571 status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0,
1572 (__u8 *)data, size);
1573
1574 if (status < 0)
1575 dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
1576
1577 kfree(data);
1578
1579 return status;
1580 }
1581
1582 static int ti_do_download(struct usb_device *dev, int pipe,
1583 u8 *buffer, int size)
1584 {
1585 int pos;
1586 u8 cs = 0;
1587 int done;
1588 struct ti_firmware_header *header;
1589 int status = 0;
1590 int len;
1591
1592 for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
1593 cs = (u8)(cs + buffer[pos]);
1594
1595 header = (struct ti_firmware_header *)buffer;
1596 header->wLength = cpu_to_le16(size - sizeof(*header));
1597 header->bCheckSum = cs;
1598
1599 dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
1600 for (pos = 0; pos < size; pos += done) {
1601 len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1602 status = usb_bulk_msg(dev, pipe, buffer + pos, len,
1603 &done, 1000);
1604 if (status)
1605 break;
1606 }
1607 return status;
1608 }
1609
1610 static int ti_download_firmware(struct ti_device *tdev)
1611 {
1612 int status;
1613 int buffer_size;
1614 u8 *buffer;
1615 struct usb_device *dev = tdev->td_serial->dev;
1616 unsigned int pipe = usb_sndbulkpipe(dev,
1617 tdev->td_serial->port[0]->bulk_out_endpointAddress);
1618 const struct firmware *fw_p;
1619 char buf[32];
1620
1621 if (le16_to_cpu(dev->descriptor.idVendor) == MXU1_VENDOR_ID) {
1622 snprintf(buf,
1623 sizeof(buf),
1624 "moxa/moxa-%04x.fw",
1625 le16_to_cpu(dev->descriptor.idProduct));
1626
1627 status = request_firmware(&fw_p, buf, &dev->dev);
1628 goto check_firmware;
1629 }
1630
1631 /* try ID specific firmware first, then try generic firmware */
1632 sprintf(buf, "ti_usb-v%04x-p%04x.fw",
1633 le16_to_cpu(dev->descriptor.idVendor),
1634 le16_to_cpu(dev->descriptor.idProduct));
1635 status = request_firmware(&fw_p, buf, &dev->dev);
1636
1637 if (status != 0) {
1638 buf[0] = '\0';
1639 if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) {
1640 switch (le16_to_cpu(dev->descriptor.idProduct)) {
1641 case MTS_CDMA_PRODUCT_ID:
1642 strcpy(buf, "mts_cdma.fw");
1643 break;
1644 case MTS_GSM_PRODUCT_ID:
1645 strcpy(buf, "mts_gsm.fw");
1646 break;
1647 case MTS_EDGE_PRODUCT_ID:
1648 strcpy(buf, "mts_edge.fw");
1649 break;
1650 case MTS_MT9234MU_PRODUCT_ID:
1651 strcpy(buf, "mts_mt9234mu.fw");
1652 break;
1653 case MTS_MT9234ZBA_PRODUCT_ID:
1654 strcpy(buf, "mts_mt9234zba.fw");
1655 break;
1656 case MTS_MT9234ZBAOLD_PRODUCT_ID:
1657 strcpy(buf, "mts_mt9234zba.fw");
1658 break; }
1659 }
1660 if (buf[0] == '\0') {
1661 if (tdev->td_is_3410)
1662 strcpy(buf, "ti_3410.fw");
1663 else
1664 strcpy(buf, "ti_5052.fw");
1665 }
1666 status = request_firmware(&fw_p, buf, &dev->dev);
1667 }
1668
1669 check_firmware:
1670 if (status) {
1671 dev_err(&dev->dev, "%s - firmware not found\n", __func__);
1672 return -ENOENT;
1673 }
1674 if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
1675 dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
1676 release_firmware(fw_p);
1677 return -ENOENT;
1678 }
1679
1680 buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1681 buffer = kmalloc(buffer_size, GFP_KERNEL);
1682 if (buffer) {
1683 memcpy(buffer, fw_p->data, fw_p->size);
1684 memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
1685 status = ti_do_download(dev, pipe, buffer, fw_p->size);
1686 kfree(buffer);
1687 } else {
1688 status = -ENOMEM;
1689 }
1690 release_firmware(fw_p);
1691 if (status) {
1692 dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
1693 __func__, status);
1694 return status;
1695 }
1696
1697 dev_dbg(&dev->dev, "%s - download successful\n", __func__);
1698
1699 return 0;
1700 }
Linux with added FPC-III support