?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'v6v7' into devel
[linux/fpc-iii.git] / arch / arm / mach-at91 / at91sam9g45_devices.c
blob1e8f275c17f602349540461bceb989ae34b21ca2
1 /*
2 * On-Chip devices setup code for the AT91SAM9G45 family
3 *
4 * Copyright (C) 2009 Atmel Corporation.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 */
12 #include <asm/mach/arch.h>
13 #include <asm/mach/map.h>
14
15 #include <linux/dma-mapping.h>
16 #include <linux/platform_device.h>
17 #include <linux/i2c-gpio.h>
18 #include <linux/atmel-mci.h>
19
20 #include <linux/fb.h>
21 #include <video/atmel_lcdc.h>
22
23 #include <mach/board.h>
24 #include <mach/gpio.h>
25 #include <mach/at91sam9g45.h>
26 #include <mach/at91sam9g45_matrix.h>
27 #include <mach/at91sam9_smc.h>
28 #include <mach/at_hdmac.h>
29 #include <mach/atmel-mci.h>
30
31 #include "generic.h"
32
33
34 /* --------------------------------------------------------------------
35 * HDMAC - AHB DMA Controller
36 * -------------------------------------------------------------------- */
37
38 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
39 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
40
41 static struct at_dma_platform_data atdma_pdata = {
42 .nr_channels = 8,
43 };
44
45 static struct resource hdmac_resources[] = {
46 [0] = {
47 .start = AT91_BASE_SYS + AT91_DMA,
48 .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
49 .flags = IORESOURCE_MEM,
50 },
51 [1] = {
52 .start = AT91SAM9G45_ID_DMA,
53 .end = AT91SAM9G45_ID_DMA,
54 .flags = IORESOURCE_IRQ,
55 },
56 };
57
58 static struct platform_device at_hdmac_device = {
59 .name = "at_hdmac",
60 .id = -1,
61 .dev = {
62 .dma_mask = &hdmac_dmamask,
63 .coherent_dma_mask = DMA_BIT_MASK(32),
64 .platform_data = &atdma_pdata,
65 },
66 .resource = hdmac_resources,
67 .num_resources = ARRAY_SIZE(hdmac_resources),
68 };
69
70 void __init at91_add_device_hdmac(void)
71 {
72 dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
73 dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
74 platform_device_register(&at_hdmac_device);
75 }
76 #else
77 void __init at91_add_device_hdmac(void) {}
78 #endif
79
80
81 /* --------------------------------------------------------------------
82 * USB Host (OHCI)
83 * -------------------------------------------------------------------- */
84
85 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
86 static u64 ohci_dmamask = DMA_BIT_MASK(32);
87 static struct at91_usbh_data usbh_ohci_data;
88
89 static struct resource usbh_ohci_resources[] = {
90 [0] = {
91 .start = AT91SAM9G45_OHCI_BASE,
92 .end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
93 .flags = IORESOURCE_MEM,
94 },
95 [1] = {
96 .start = AT91SAM9G45_ID_UHPHS,
97 .end = AT91SAM9G45_ID_UHPHS,
98 .flags = IORESOURCE_IRQ,
99 },
100 };
101
102 static struct platform_device at91_usbh_ohci_device = {
103 .name = "at91_ohci",
104 .id = -1,
105 .dev = {
106 .dma_mask = &ohci_dmamask,
107 .coherent_dma_mask = DMA_BIT_MASK(32),
108 .platform_data = &usbh_ohci_data,
109 },
110 .resource = usbh_ohci_resources,
111 .num_resources = ARRAY_SIZE(usbh_ohci_resources),
112 };
113
114 void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
115 {
116 int i;
117
118 if (!data)
119 return;
120
121 /* Enable VBus control for UHP ports */
122 for (i = 0; i < data->ports; i++) {
123 if (data->vbus_pin[i])
124 at91_set_gpio_output(data->vbus_pin[i], 0);
125 }
126
127 usbh_ohci_data = *data;
128 platform_device_register(&at91_usbh_ohci_device);
129 }
130 #else
131 void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
132 #endif
133
134
135 /* --------------------------------------------------------------------
136 * USB Host HS (EHCI)
137 * Needs an OHCI host for low and full speed management
138 * -------------------------------------------------------------------- */
139
140 #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
141 static u64 ehci_dmamask = DMA_BIT_MASK(32);
142 static struct at91_usbh_data usbh_ehci_data;
143
144 static struct resource usbh_ehci_resources[] = {
145 [0] = {
146 .start = AT91SAM9G45_EHCI_BASE,
147 .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
148 .flags = IORESOURCE_MEM,
149 },
150 [1] = {
151 .start = AT91SAM9G45_ID_UHPHS,
152 .end = AT91SAM9G45_ID_UHPHS,
153 .flags = IORESOURCE_IRQ,
154 },
155 };
156
157 static struct platform_device at91_usbh_ehci_device = {
158 .name = "atmel-ehci",
159 .id = -1,
160 .dev = {
161 .dma_mask = &ehci_dmamask,
162 .coherent_dma_mask = DMA_BIT_MASK(32),
163 .platform_data = &usbh_ehci_data,
164 },
165 .resource = usbh_ehci_resources,
166 .num_resources = ARRAY_SIZE(usbh_ehci_resources),
167 };
168
169 void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
170 {
171 int i;
172
173 if (!data)
174 return;
175
176 /* Enable VBus control for UHP ports */
177 for (i = 0; i < data->ports; i++) {
178 if (data->vbus_pin[i])
179 at91_set_gpio_output(data->vbus_pin[i], 0);
180 }
181
182 usbh_ehci_data = *data;
183 at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
184 platform_device_register(&at91_usbh_ehci_device);
185 }
186 #else
187 void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
188 #endif
189
190
191 /* --------------------------------------------------------------------
192 * USB HS Device (Gadget)
193 * -------------------------------------------------------------------- */
194
195 #if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
196 static struct resource usba_udc_resources[] = {
197 [0] = {
198 .start = AT91SAM9G45_UDPHS_FIFO,
199 .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
200 .flags = IORESOURCE_MEM,
201 },
202 [1] = {
203 .start = AT91SAM9G45_BASE_UDPHS,
204 .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
205 .flags = IORESOURCE_MEM,
206 },
207 [2] = {
208 .start = AT91SAM9G45_ID_UDPHS,
209 .end = AT91SAM9G45_ID_UDPHS,
210 .flags = IORESOURCE_IRQ,
211 },
212 };
213
214 #define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
215 [idx] = { \
216 .name = nam, \
217 .index = idx, \
218 .fifo_size = maxpkt, \
219 .nr_banks = maxbk, \
220 .can_dma = dma, \
221 .can_isoc = isoc, \
222 }
223
224 static struct usba_ep_data usba_udc_ep[] __initdata = {
225 EP("ep0", 0, 64, 1, 0, 0),
226 EP("ep1", 1, 1024, 2, 1, 1),
227 EP("ep2", 2, 1024, 2, 1, 1),
228 EP("ep3", 3, 1024, 3, 1, 0),
229 EP("ep4", 4, 1024, 3, 1, 0),
230 EP("ep5", 5, 1024, 3, 1, 1),
231 EP("ep6", 6, 1024, 3, 1, 1),
232 };
233
234 #undef EP
235
236 /*
237 * pdata doesn't have room for any endpoints, so we need to
238 * append room for the ones we need right after it.
239 */
240 static struct {
241 struct usba_platform_data pdata;
242 struct usba_ep_data ep[7];
243 } usba_udc_data;
244
245 static struct platform_device at91_usba_udc_device = {
246 .name = "atmel_usba_udc",
247 .id = -1,
248 .dev = {
249 .platform_data = &usba_udc_data.pdata,
250 },
251 .resource = usba_udc_resources,
252 .num_resources = ARRAY_SIZE(usba_udc_resources),
253 };
254
255 void __init at91_add_device_usba(struct usba_platform_data *data)
256 {
257 usba_udc_data.pdata.vbus_pin = -EINVAL;
258 usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
259 memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
260
261 if (data && data->vbus_pin > 0) {
262 at91_set_gpio_input(data->vbus_pin, 0);
263 at91_set_deglitch(data->vbus_pin, 1);
264 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
265 }
266
267 /* Pullup pin is handled internally by USB device peripheral */
268
269 /* Clocks */
270 at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
271 at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
272
273 platform_device_register(&at91_usba_udc_device);
274 }
275 #else
276 void __init at91_add_device_usba(struct usba_platform_data *data) {}
277 #endif
278
279
280 /* --------------------------------------------------------------------
281 * Ethernet
282 * -------------------------------------------------------------------- */
283
284 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
285 static u64 eth_dmamask = DMA_BIT_MASK(32);
286 static struct at91_eth_data eth_data;
287
288 static struct resource eth_resources[] = {
289 [0] = {
290 .start = AT91SAM9G45_BASE_EMAC,
291 .end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
292 .flags = IORESOURCE_MEM,
293 },
294 [1] = {
295 .start = AT91SAM9G45_ID_EMAC,
296 .end = AT91SAM9G45_ID_EMAC,
297 .flags = IORESOURCE_IRQ,
298 },
299 };
300
301 static struct platform_device at91sam9g45_eth_device = {
302 .name = "macb",
303 .id = -1,
304 .dev = {
305 .dma_mask = &eth_dmamask,
306 .coherent_dma_mask = DMA_BIT_MASK(32),
307 .platform_data = &eth_data,
308 },
309 .resource = eth_resources,
310 .num_resources = ARRAY_SIZE(eth_resources),
311 };
312
313 void __init at91_add_device_eth(struct at91_eth_data *data)
314 {
315 if (!data)
316 return;
317
318 if (data->phy_irq_pin) {
319 at91_set_gpio_input(data->phy_irq_pin, 0);
320 at91_set_deglitch(data->phy_irq_pin, 1);
321 }
322
323 /* Pins used for MII and RMII */
324 at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
325 at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
326 at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
327 at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
328 at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
329 at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
330 at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
331 at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
332 at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
333 at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
334
335 if (!data->is_rmii) {
336 at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
337 at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
338 at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
339 at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
340 at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
341 at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
342 at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
343 at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
344 }
345
346 eth_data = *data;
347 platform_device_register(&at91sam9g45_eth_device);
348 }
349 #else
350 void __init at91_add_device_eth(struct at91_eth_data *data) {}
351 #endif
352
353
354 /* --------------------------------------------------------------------
355 * MMC / SD
356 * -------------------------------------------------------------------- */
357
358 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
359 static u64 mmc_dmamask = DMA_BIT_MASK(32);
360 static struct mci_platform_data mmc0_data, mmc1_data;
361
362 static struct resource mmc0_resources[] = {
363 [0] = {
364 .start = AT91SAM9G45_BASE_MCI0,
365 .end = AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
366 .flags = IORESOURCE_MEM,
367 },
368 [1] = {
369 .start = AT91SAM9G45_ID_MCI0,
370 .end = AT91SAM9G45_ID_MCI0,
371 .flags = IORESOURCE_IRQ,
372 },
373 };
374
375 static struct platform_device at91sam9g45_mmc0_device = {
376 .name = "atmel_mci",
377 .id = 0,
378 .dev = {
379 .dma_mask = &mmc_dmamask,
380 .coherent_dma_mask = DMA_BIT_MASK(32),
381 .platform_data = &mmc0_data,
382 },
383 .resource = mmc0_resources,
384 .num_resources = ARRAY_SIZE(mmc0_resources),
385 };
386
387 static struct resource mmc1_resources[] = {
388 [0] = {
389 .start = AT91SAM9G45_BASE_MCI1,
390 .end = AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
391 .flags = IORESOURCE_MEM,
392 },
393 [1] = {
394 .start = AT91SAM9G45_ID_MCI1,
395 .end = AT91SAM9G45_ID_MCI1,
396 .flags = IORESOURCE_IRQ,
397 },
398 };
399
400 static struct platform_device at91sam9g45_mmc1_device = {
401 .name = "atmel_mci",
402 .id = 1,
403 .dev = {
404 .dma_mask = &mmc_dmamask,
405 .coherent_dma_mask = DMA_BIT_MASK(32),
406 .platform_data = &mmc1_data,
407 },
408 .resource = mmc1_resources,
409 .num_resources = ARRAY_SIZE(mmc1_resources),
410 };
411
412 /* Consider only one slot : slot 0 */
413 void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
414 {
415
416 if (!data)
417 return;
418
419 /* Must have at least one usable slot */
420 if (!data->slot[0].bus_width)
421 return;
422
423 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
424 {
425 struct at_dma_slave *atslave;
426 struct mci_dma_data *alt_atslave;
427
428 alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
429 atslave = &alt_atslave->sdata;
430
431 /* DMA slave channel configuration */
432 atslave->dma_dev = &at_hdmac_device.dev;
433 atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT;
434 atslave->cfg = ATC_FIFOCFG_HALFFIFO
435 | ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
436 atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
437 if (mmc_id == 0) /* MCI0 */
438 atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
439 | ATC_DST_PER(AT_DMA_ID_MCI0);
440
441 else /* MCI1 */
442 atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
443 | ATC_DST_PER(AT_DMA_ID_MCI1);
444
445 data->dma_slave = alt_atslave;
446 }
447 #endif
448
449
450 /* input/irq */
451 if (data->slot[0].detect_pin) {
452 at91_set_gpio_input(data->slot[0].detect_pin, 1);
453 at91_set_deglitch(data->slot[0].detect_pin, 1);
454 }
455 if (data->slot[0].wp_pin)
456 at91_set_gpio_input(data->slot[0].wp_pin, 1);
457
458 if (mmc_id == 0) { /* MCI0 */
459
460 /* CLK */
461 at91_set_A_periph(AT91_PIN_PA0, 0);
462
463 /* CMD */
464 at91_set_A_periph(AT91_PIN_PA1, 1);
465
466 /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
467 at91_set_A_periph(AT91_PIN_PA2, 1);
468 if (data->slot[0].bus_width == 4) {
469 at91_set_A_periph(AT91_PIN_PA3, 1);
470 at91_set_A_periph(AT91_PIN_PA4, 1);
471 at91_set_A_periph(AT91_PIN_PA5, 1);
472 if (data->slot[0].bus_width == 8) {
473 at91_set_A_periph(AT91_PIN_PA6, 1);
474 at91_set_A_periph(AT91_PIN_PA7, 1);
475 at91_set_A_periph(AT91_PIN_PA8, 1);
476 at91_set_A_periph(AT91_PIN_PA9, 1);
477 }
478 }
479
480 mmc0_data = *data;
481 at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk");
482 platform_device_register(&at91sam9g45_mmc0_device);
483
484 } else { /* MCI1 */
485
486 /* CLK */
487 at91_set_A_periph(AT91_PIN_PA31, 0);
488
489 /* CMD */
490 at91_set_A_periph(AT91_PIN_PA22, 1);
491
492 /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
493 at91_set_A_periph(AT91_PIN_PA23, 1);
494 if (data->slot[0].bus_width == 4) {
495 at91_set_A_periph(AT91_PIN_PA24, 1);
496 at91_set_A_periph(AT91_PIN_PA25, 1);
497 at91_set_A_periph(AT91_PIN_PA26, 1);
498 if (data->slot[0].bus_width == 8) {
499 at91_set_A_periph(AT91_PIN_PA27, 1);
500 at91_set_A_periph(AT91_PIN_PA28, 1);
501 at91_set_A_periph(AT91_PIN_PA29, 1);
502 at91_set_A_periph(AT91_PIN_PA30, 1);
503 }
504 }
505
506 mmc1_data = *data;
507 at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk");
508 platform_device_register(&at91sam9g45_mmc1_device);
509
510 }
511 }
512 #else
513 void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
514 #endif
515
516
517 /* --------------------------------------------------------------------
518 * NAND / SmartMedia
519 * -------------------------------------------------------------------- */
520
521 #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
522 static struct atmel_nand_data nand_data;
523
524 #define NAND_BASE AT91_CHIPSELECT_3
525
526 static struct resource nand_resources[] = {
527 [0] = {
528 .start = NAND_BASE,
529 .end = NAND_BASE + SZ_256M - 1,
530 .flags = IORESOURCE_MEM,
531 },
532 [1] = {
533 .start = AT91_BASE_SYS + AT91_ECC,
534 .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
535 .flags = IORESOURCE_MEM,
536 }
537 };
538
539 static struct platform_device at91sam9g45_nand_device = {
540 .name = "atmel_nand",
541 .id = -1,
542 .dev = {
543 .platform_data = &nand_data,
544 },
545 .resource = nand_resources,
546 .num_resources = ARRAY_SIZE(nand_resources),
547 };
548
549 void __init at91_add_device_nand(struct atmel_nand_data *data)
550 {
551 unsigned long csa;
552
553 if (!data)
554 return;
555
556 csa = at91_sys_read(AT91_MATRIX_EBICSA);
557 at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
558
559 /* enable pin */
560 if (data->enable_pin)
561 at91_set_gpio_output(data->enable_pin, 1);
562
563 /* ready/busy pin */
564 if (data->rdy_pin)
565 at91_set_gpio_input(data->rdy_pin, 1);
566
567 /* card detect pin */
568 if (data->det_pin)
569 at91_set_gpio_input(data->det_pin, 1);
570
571 nand_data = *data;
572 platform_device_register(&at91sam9g45_nand_device);
573 }
574 #else
575 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
576 #endif
577
578
579 /* --------------------------------------------------------------------
580 * TWI (i2c)
581 * -------------------------------------------------------------------- */
582
583 /*
584 * Prefer the GPIO code since the TWI controller isn't robust
585 * (gets overruns and underruns under load) and can only issue
586 * repeated STARTs in one scenario (the driver doesn't yet handle them).
587 */
588 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
589 static struct i2c_gpio_platform_data pdata_i2c0 = {
590 .sda_pin = AT91_PIN_PA20,
591 .sda_is_open_drain = 1,
592 .scl_pin = AT91_PIN_PA21,
593 .scl_is_open_drain = 1,
594 .udelay = 5, /* ~100 kHz */
595 };
596
597 static struct platform_device at91sam9g45_twi0_device = {
598 .name = "i2c-gpio",
599 .id = 0,
600 .dev.platform_data = &pdata_i2c0,
601 };
602
603 static struct i2c_gpio_platform_data pdata_i2c1 = {
604 .sda_pin = AT91_PIN_PB10,
605 .sda_is_open_drain = 1,
606 .scl_pin = AT91_PIN_PB11,
607 .scl_is_open_drain = 1,
608 .udelay = 5, /* ~100 kHz */
609 };
610
611 static struct platform_device at91sam9g45_twi1_device = {
612 .name = "i2c-gpio",
613 .id = 1,
614 .dev.platform_data = &pdata_i2c1,
615 };
616
617 void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
618 {
619 i2c_register_board_info(i2c_id, devices, nr_devices);
620
621 if (i2c_id == 0) {
622 at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
623 at91_set_multi_drive(AT91_PIN_PA20, 1);
624
625 at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
626 at91_set_multi_drive(AT91_PIN_PA21, 1);
627
628 platform_device_register(&at91sam9g45_twi0_device);
629 } else {
630 at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
631 at91_set_multi_drive(AT91_PIN_PB10, 1);
632
633 at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
634 at91_set_multi_drive(AT91_PIN_PB11, 1);
635
636 platform_device_register(&at91sam9g45_twi1_device);
637 }
638 }
639
640 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
641 static struct resource twi0_resources[] = {
642 [0] = {
643 .start = AT91SAM9G45_BASE_TWI0,
644 .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
645 .flags = IORESOURCE_MEM,
646 },
647 [1] = {
648 .start = AT91SAM9G45_ID_TWI0,
649 .end = AT91SAM9G45_ID_TWI0,
650 .flags = IORESOURCE_IRQ,
651 },
652 };
653
654 static struct platform_device at91sam9g45_twi0_device = {
655 .name = "at91_i2c",
656 .id = 0,
657 .resource = twi0_resources,
658 .num_resources = ARRAY_SIZE(twi0_resources),
659 };
660
661 static struct resource twi1_resources[] = {
662 [0] = {
663 .start = AT91SAM9G45_BASE_TWI1,
664 .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
665 .flags = IORESOURCE_MEM,
666 },
667 [1] = {
668 .start = AT91SAM9G45_ID_TWI1,
669 .end = AT91SAM9G45_ID_TWI1,
670 .flags = IORESOURCE_IRQ,
671 },
672 };
673
674 static struct platform_device at91sam9g45_twi1_device = {
675 .name = "at91_i2c",
676 .id = 1,
677 .resource = twi1_resources,
678 .num_resources = ARRAY_SIZE(twi1_resources),
679 };
680
681 void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
682 {
683 i2c_register_board_info(i2c_id, devices, nr_devices);
684
685 /* pins used for TWI interface */
686 if (i2c_id == 0) {
687 at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
688 at91_set_multi_drive(AT91_PIN_PA20, 1);
689
690 at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
691 at91_set_multi_drive(AT91_PIN_PA21, 1);
692
693 platform_device_register(&at91sam9g45_twi0_device);
694 } else {
695 at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
696 at91_set_multi_drive(AT91_PIN_PB10, 1);
697
698 at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
699 at91_set_multi_drive(AT91_PIN_PB11, 1);
700
701 platform_device_register(&at91sam9g45_twi1_device);
702 }
703 }
704 #else
705 void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
706 #endif
707
708
709 /* --------------------------------------------------------------------
710 * SPI
711 * -------------------------------------------------------------------- */
712
713 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
714 static u64 spi_dmamask = DMA_BIT_MASK(32);
715
716 static struct resource spi0_resources[] = {
717 [0] = {
718 .start = AT91SAM9G45_BASE_SPI0,
719 .end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
720 .flags = IORESOURCE_MEM,
721 },
722 [1] = {
723 .start = AT91SAM9G45_ID_SPI0,
724 .end = AT91SAM9G45_ID_SPI0,
725 .flags = IORESOURCE_IRQ,
726 },
727 };
728
729 static struct platform_device at91sam9g45_spi0_device = {
730 .name = "atmel_spi",
731 .id = 0,
732 .dev = {
733 .dma_mask = &spi_dmamask,
734 .coherent_dma_mask = DMA_BIT_MASK(32),
735 },
736 .resource = spi0_resources,
737 .num_resources = ARRAY_SIZE(spi0_resources),
738 };
739
740 static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
741
742 static struct resource spi1_resources[] = {
743 [0] = {
744 .start = AT91SAM9G45_BASE_SPI1,
745 .end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
746 .flags = IORESOURCE_MEM,
747 },
748 [1] = {
749 .start = AT91SAM9G45_ID_SPI1,
750 .end = AT91SAM9G45_ID_SPI1,
751 .flags = IORESOURCE_IRQ,
752 },
753 };
754
755 static struct platform_device at91sam9g45_spi1_device = {
756 .name = "atmel_spi",
757 .id = 1,
758 .dev = {
759 .dma_mask = &spi_dmamask,
760 .coherent_dma_mask = DMA_BIT_MASK(32),
761 },
762 .resource = spi1_resources,
763 .num_resources = ARRAY_SIZE(spi1_resources),
764 };
765
766 static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
767
768 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
769 {
770 int i;
771 unsigned long cs_pin;
772 short enable_spi0 = 0;
773 short enable_spi1 = 0;
774
775 /* Choose SPI chip-selects */
776 for (i = 0; i < nr_devices; i++) {
777 if (devices[i].controller_data)
778 cs_pin = (unsigned long) devices[i].controller_data;
779 else if (devices[i].bus_num == 0)
780 cs_pin = spi0_standard_cs[devices[i].chip_select];
781 else
782 cs_pin = spi1_standard_cs[devices[i].chip_select];
783
784 if (devices[i].bus_num == 0)
785 enable_spi0 = 1;
786 else
787 enable_spi1 = 1;
788
789 /* enable chip-select pin */
790 at91_set_gpio_output(cs_pin, 1);
791
792 /* pass chip-select pin to driver */
793 devices[i].controller_data = (void *) cs_pin;
794 }
795
796 spi_register_board_info(devices, nr_devices);
797
798 /* Configure SPI bus(es) */
799 if (enable_spi0) {
800 at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
801 at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
802 at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
803
804 at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
805 platform_device_register(&at91sam9g45_spi0_device);
806 }
807 if (enable_spi1) {
808 at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
809 at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
810 at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
811
812 at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
813 platform_device_register(&at91sam9g45_spi1_device);
814 }
815 }
816 #else
817 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
818 #endif
819
820
821 /* --------------------------------------------------------------------
822 * AC97
823 * -------------------------------------------------------------------- */
824
825 #if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
826 static u64 ac97_dmamask = DMA_BIT_MASK(32);
827 static struct ac97c_platform_data ac97_data;
828
829 static struct resource ac97_resources[] = {
830 [0] = {
831 .start = AT91SAM9G45_BASE_AC97C,
832 .end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
833 .flags = IORESOURCE_MEM,
834 },
835 [1] = {
836 .start = AT91SAM9G45_ID_AC97C,
837 .end = AT91SAM9G45_ID_AC97C,
838 .flags = IORESOURCE_IRQ,
839 },
840 };
841
842 static struct platform_device at91sam9g45_ac97_device = {
843 .name = "atmel_ac97c",
844 .id = 0,
845 .dev = {
846 .dma_mask = &ac97_dmamask,
847 .coherent_dma_mask = DMA_BIT_MASK(32),
848 .platform_data = &ac97_data,
849 },
850 .resource = ac97_resources,
851 .num_resources = ARRAY_SIZE(ac97_resources),
852 };
853
854 void __init at91_add_device_ac97(struct ac97c_platform_data *data)
855 {
856 if (!data)
857 return;
858
859 at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
860 at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
861 at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
862 at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
863
864 /* reset */
865 if (data->reset_pin)
866 at91_set_gpio_output(data->reset_pin, 0);
867
868 ac97_data = *data;
869 platform_device_register(&at91sam9g45_ac97_device);
870 }
871 #else
872 void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
873 #endif
874
875
876 /* --------------------------------------------------------------------
877 * LCD Controller
878 * -------------------------------------------------------------------- */
879
880 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
881 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
882 static struct atmel_lcdfb_info lcdc_data;
883
884 static struct resource lcdc_resources[] = {
885 [0] = {
886 .start = AT91SAM9G45_LCDC_BASE,
887 .end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
888 .flags = IORESOURCE_MEM,
889 },
890 [1] = {
891 .start = AT91SAM9G45_ID_LCDC,
892 .end = AT91SAM9G45_ID_LCDC,
893 .flags = IORESOURCE_IRQ,
894 },
895 };
896
897 static struct platform_device at91_lcdc_device = {
898 .name = "atmel_lcdfb",
899 .id = 0,
900 .dev = {
901 .dma_mask = &lcdc_dmamask,
902 .coherent_dma_mask = DMA_BIT_MASK(32),
903 .platform_data = &lcdc_data,
904 },
905 .resource = lcdc_resources,
906 .num_resources = ARRAY_SIZE(lcdc_resources),
907 };
908
909 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
910 {
911 if (!data)
912 return;
913
914 at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
915
916 at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
917 at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
918 at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
919 at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
920 at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
921 at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
922 at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
923 at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
924 at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
925 at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
926 at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
927 at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
928 at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
929 at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
930 at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
931 at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
932 at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
933 at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
934 at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
935 at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
936 at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
937 at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
938 at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
939 at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
940 at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
941 at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
942 at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
943 at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
944 at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
945
946 lcdc_data = *data;
947 platform_device_register(&at91_lcdc_device);
948 }
949 #else
950 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
951 #endif
952
953
954 /* --------------------------------------------------------------------
955 * Timer/Counter block
956 * -------------------------------------------------------------------- */
957
958 #ifdef CONFIG_ATMEL_TCLIB
959 static struct resource tcb0_resources[] = {
960 [0] = {
961 .start = AT91SAM9G45_BASE_TCB0,
962 .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
963 .flags = IORESOURCE_MEM,
964 },
965 [1] = {
966 .start = AT91SAM9G45_ID_TCB,
967 .end = AT91SAM9G45_ID_TCB,
968 .flags = IORESOURCE_IRQ,
969 },
970 };
971
972 static struct platform_device at91sam9g45_tcb0_device = {
973 .name = "atmel_tcb",
974 .id = 0,
975 .resource = tcb0_resources,
976 .num_resources = ARRAY_SIZE(tcb0_resources),
977 };
978
979 /* TCB1 begins with TC3 */
980 static struct resource tcb1_resources[] = {
981 [0] = {
982 .start = AT91SAM9G45_BASE_TCB1,
983 .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
984 .flags = IORESOURCE_MEM,
985 },
986 [1] = {
987 .start = AT91SAM9G45_ID_TCB,
988 .end = AT91SAM9G45_ID_TCB,
989 .flags = IORESOURCE_IRQ,
990 },
991 };
992
993 static struct platform_device at91sam9g45_tcb1_device = {
994 .name = "atmel_tcb",
995 .id = 1,
996 .resource = tcb1_resources,
997 .num_resources = ARRAY_SIZE(tcb1_resources),
998 };
999
1000 static void __init at91_add_device_tc(void)
1001 {
1002 /* this chip has one clock and irq for all six TC channels */
1003 at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
1004 platform_device_register(&at91sam9g45_tcb0_device);
1005 at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
1006 platform_device_register(&at91sam9g45_tcb1_device);
1007 }
1008 #else
1009 static void __init at91_add_device_tc(void) { }
1010 #endif
1011
1012
1013 /* --------------------------------------------------------------------
1014 * RTC
1015 * -------------------------------------------------------------------- */
1016
1017 #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
1018 static struct platform_device at91sam9g45_rtc_device = {
1019 .name = "at91_rtc",
1020 .id = -1,
1021 .num_resources = 0,
1022 };
1023
1024 static void __init at91_add_device_rtc(void)
1025 {
1026 platform_device_register(&at91sam9g45_rtc_device);
1027 }
1028 #else
1029 static void __init at91_add_device_rtc(void) {}
1030 #endif
1031
1032
1033 /* --------------------------------------------------------------------
1034 * Touchscreen
1035 * -------------------------------------------------------------------- */
1036
1037 #if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
1038 static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
1039 static struct at91_tsadcc_data tsadcc_data;
1040
1041 static struct resource tsadcc_resources[] = {
1042 [0] = {
1043 .start = AT91SAM9G45_BASE_TSC,
1044 .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
1045 .flags = IORESOURCE_MEM,
1046 },
1047 [1] = {
1048 .start = AT91SAM9G45_ID_TSC,
1049 .end = AT91SAM9G45_ID_TSC,
1050 .flags = IORESOURCE_IRQ,
1051 }
1052 };
1053
1054 static struct platform_device at91sam9g45_tsadcc_device = {
1055 .name = "atmel_tsadcc",
1056 .id = -1,
1057 .dev = {
1058 .dma_mask = &tsadcc_dmamask,
1059 .coherent_dma_mask = DMA_BIT_MASK(32),
1060 .platform_data = &tsadcc_data,
1061 },
1062 .resource = tsadcc_resources,
1063 .num_resources = ARRAY_SIZE(tsadcc_resources),
1064 };
1065
1066 void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
1067 {
1068 if (!data)
1069 return;
1070
1071 at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */
1072 at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */
1073 at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */
1074 at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */
1075
1076 tsadcc_data = *data;
1077 platform_device_register(&at91sam9g45_tsadcc_device);
1078 }
1079 #else
1080 void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
1081 #endif
1082
1083
1084 /* --------------------------------------------------------------------
1085 * RTT
1086 * -------------------------------------------------------------------- */
1087
1088 static struct resource rtt_resources[] = {
1089 {
1090 .start = AT91_BASE_SYS + AT91_RTT,
1091 .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
1092 .flags = IORESOURCE_MEM,
1093 }
1094 };
1095
1096 static struct platform_device at91sam9g45_rtt_device = {
1097 .name = "at91_rtt",
1098 .id = 0,
1099 .resource = rtt_resources,
1100 .num_resources = ARRAY_SIZE(rtt_resources),
1101 };
1102
1103 static void __init at91_add_device_rtt(void)
1104 {
1105 platform_device_register(&at91sam9g45_rtt_device);
1106 }
1107
1108
1109 /* --------------------------------------------------------------------
1110 * Watchdog
1111 * -------------------------------------------------------------------- */
1112
1113 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
1114 static struct platform_device at91sam9g45_wdt_device = {
1115 .name = "at91_wdt",
1116 .id = -1,
1117 .num_resources = 0,
1118 };
1119
1120 static void __init at91_add_device_watchdog(void)
1121 {
1122 platform_device_register(&at91sam9g45_wdt_device);
1123 }
1124 #else
1125 static void __init at91_add_device_watchdog(void) {}
1126 #endif
1127
1128
1129 /* --------------------------------------------------------------------
1130 * PWM
1131 * --------------------------------------------------------------------*/
1132
1133 #if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
1134 static u32 pwm_mask;
1135
1136 static struct resource pwm_resources[] = {
1137 [0] = {
1138 .start = AT91SAM9G45_BASE_PWMC,
1139 .end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
1140 .flags = IORESOURCE_MEM,
1141 },
1142 [1] = {
1143 .start = AT91SAM9G45_ID_PWMC,
1144 .end = AT91SAM9G45_ID_PWMC,
1145 .flags = IORESOURCE_IRQ,
1146 },
1147 };
1148
1149 static struct platform_device at91sam9g45_pwm0_device = {
1150 .name = "atmel_pwm",
1151 .id = -1,
1152 .dev = {
1153 .platform_data = &pwm_mask,
1154 },
1155 .resource = pwm_resources,
1156 .num_resources = ARRAY_SIZE(pwm_resources),
1157 };
1158
1159 void __init at91_add_device_pwm(u32 mask)
1160 {
1161 if (mask & (1 << AT91_PWM0))
1162 at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
1163
1164 if (mask & (1 << AT91_PWM1))
1165 at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
1166
1167 if (mask & (1 << AT91_PWM2))
1168 at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
1169
1170 if (mask & (1 << AT91_PWM3))
1171 at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
1172
1173 pwm_mask = mask;
1174
1175 platform_device_register(&at91sam9g45_pwm0_device);
1176 }
1177 #else
1178 void __init at91_add_device_pwm(u32 mask) {}
1179 #endif
1180
1181
1182 /* --------------------------------------------------------------------
1183 * SSC -- Synchronous Serial Controller
1184 * -------------------------------------------------------------------- */
1185
1186 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
1187 static u64 ssc0_dmamask = DMA_BIT_MASK(32);
1188
1189 static struct resource ssc0_resources[] = {
1190 [0] = {
1191 .start = AT91SAM9G45_BASE_SSC0,
1192 .end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
1193 .flags = IORESOURCE_MEM,
1194 },
1195 [1] = {
1196 .start = AT91SAM9G45_ID_SSC0,
1197 .end = AT91SAM9G45_ID_SSC0,
1198 .flags = IORESOURCE_IRQ,
1199 },
1200 };
1201
1202 static struct platform_device at91sam9g45_ssc0_device = {
1203 .name = "ssc",
1204 .id = 0,
1205 .dev = {
1206 .dma_mask = &ssc0_dmamask,
1207 .coherent_dma_mask = DMA_BIT_MASK(32),
1208 },
1209 .resource = ssc0_resources,
1210 .num_resources = ARRAY_SIZE(ssc0_resources),
1211 };
1212
1213 static inline void configure_ssc0_pins(unsigned pins)
1214 {
1215 if (pins & ATMEL_SSC_TF)
1216 at91_set_A_periph(AT91_PIN_PD1, 1);
1217 if (pins & ATMEL_SSC_TK)
1218 at91_set_A_periph(AT91_PIN_PD0, 1);
1219 if (pins & ATMEL_SSC_TD)
1220 at91_set_A_periph(AT91_PIN_PD2, 1);
1221 if (pins & ATMEL_SSC_RD)
1222 at91_set_A_periph(AT91_PIN_PD3, 1);
1223 if (pins & ATMEL_SSC_RK)
1224 at91_set_A_periph(AT91_PIN_PD4, 1);
1225 if (pins & ATMEL_SSC_RF)
1226 at91_set_A_periph(AT91_PIN_PD5, 1);
1227 }
1228
1229 static u64 ssc1_dmamask = DMA_BIT_MASK(32);
1230
1231 static struct resource ssc1_resources[] = {
1232 [0] = {
1233 .start = AT91SAM9G45_BASE_SSC1,
1234 .end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
1235 .flags = IORESOURCE_MEM,
1236 },
1237 [1] = {
1238 .start = AT91SAM9G45_ID_SSC1,
1239 .end = AT91SAM9G45_ID_SSC1,
1240 .flags = IORESOURCE_IRQ,
1241 },
1242 };
1243
1244 static struct platform_device at91sam9g45_ssc1_device = {
1245 .name = "ssc",
1246 .id = 1,
1247 .dev = {
1248 .dma_mask = &ssc1_dmamask,
1249 .coherent_dma_mask = DMA_BIT_MASK(32),
1250 },
1251 .resource = ssc1_resources,
1252 .num_resources = ARRAY_SIZE(ssc1_resources),
1253 };
1254
1255 static inline void configure_ssc1_pins(unsigned pins)
1256 {
1257 if (pins & ATMEL_SSC_TF)
1258 at91_set_A_periph(AT91_PIN_PD14, 1);
1259 if (pins & ATMEL_SSC_TK)
1260 at91_set_A_periph(AT91_PIN_PD12, 1);
1261 if (pins & ATMEL_SSC_TD)
1262 at91_set_A_periph(AT91_PIN_PD10, 1);
1263 if (pins & ATMEL_SSC_RD)
1264 at91_set_A_periph(AT91_PIN_PD11, 1);
1265 if (pins & ATMEL_SSC_RK)
1266 at91_set_A_periph(AT91_PIN_PD13, 1);
1267 if (pins & ATMEL_SSC_RF)
1268 at91_set_A_periph(AT91_PIN_PD15, 1);
1269 }
1270
1271 /*
1272 * SSC controllers are accessed through library code, instead of any
1273 * kind of all-singing/all-dancing driver. For example one could be
1274 * used by a particular I2S audio codec's driver, while another one
1275 * on the same system might be used by a custom data capture driver.
1276 */
1277 void __init at91_add_device_ssc(unsigned id, unsigned pins)
1278 {
1279 struct platform_device *pdev;
1280
1281 /*
1282 * NOTE: caller is responsible for passing information matching
1283 * "pins" to whatever will be using each particular controller.
1284 */
1285 switch (id) {
1286 case AT91SAM9G45_ID_SSC0:
1287 pdev = &at91sam9g45_ssc0_device;
1288 configure_ssc0_pins(pins);
1289 at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
1290 break;
1291 case AT91SAM9G45_ID_SSC1:
1292 pdev = &at91sam9g45_ssc1_device;
1293 configure_ssc1_pins(pins);
1294 at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
1295 break;
1296 default:
1297 return;
1298 }
1299
1300 platform_device_register(pdev);
1301 }
1302
1303 #else
1304 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
1305 #endif
1306
1307
1308 /* --------------------------------------------------------------------
1309 * UART
1310 * -------------------------------------------------------------------- */
1311
1312 #if defined(CONFIG_SERIAL_ATMEL)
1313 static struct resource dbgu_resources[] = {
1314 [0] = {
1315 .start = AT91_VA_BASE_SYS + AT91_DBGU,
1316 .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
1317 .flags = IORESOURCE_MEM,
1318 },
1319 [1] = {
1320 .start = AT91_ID_SYS,
1321 .end = AT91_ID_SYS,
1322 .flags = IORESOURCE_IRQ,
1323 },
1324 };
1325
1326 static struct atmel_uart_data dbgu_data = {
1327 .use_dma_tx = 0,
1328 .use_dma_rx = 0,
1329 .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
1330 };
1331
1332 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
1333
1334 static struct platform_device at91sam9g45_dbgu_device = {
1335 .name = "atmel_usart",
1336 .id = 0,
1337 .dev = {
1338 .dma_mask = &dbgu_dmamask,
1339 .coherent_dma_mask = DMA_BIT_MASK(32),
1340 .platform_data = &dbgu_data,
1341 },
1342 .resource = dbgu_resources,
1343 .num_resources = ARRAY_SIZE(dbgu_resources),
1344 };
1345
1346 static inline void configure_dbgu_pins(void)
1347 {
1348 at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
1349 at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
1350 }
1351
1352 static struct resource uart0_resources[] = {
1353 [0] = {
1354 .start = AT91SAM9G45_BASE_US0,
1355 .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
1356 .flags = IORESOURCE_MEM,
1357 },
1358 [1] = {
1359 .start = AT91SAM9G45_ID_US0,
1360 .end = AT91SAM9G45_ID_US0,
1361 .flags = IORESOURCE_IRQ,
1362 },
1363 };
1364
1365 static struct atmel_uart_data uart0_data = {
1366 .use_dma_tx = 1,
1367 .use_dma_rx = 1,
1368 };
1369
1370 static u64 uart0_dmamask = DMA_BIT_MASK(32);
1371
1372 static struct platform_device at91sam9g45_uart0_device = {
1373 .name = "atmel_usart",
1374 .id = 1,
1375 .dev = {
1376 .dma_mask = &uart0_dmamask,
1377 .coherent_dma_mask = DMA_BIT_MASK(32),
1378 .platform_data = &uart0_data,
1379 },
1380 .resource = uart0_resources,
1381 .num_resources = ARRAY_SIZE(uart0_resources),
1382 };
1383
1384 static inline void configure_usart0_pins(unsigned pins)
1385 {
1386 at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
1387 at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
1388
1389 if (pins & ATMEL_UART_RTS)
1390 at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
1391 if (pins & ATMEL_UART_CTS)
1392 at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
1393 }
1394
1395 static struct resource uart1_resources[] = {
1396 [0] = {
1397 .start = AT91SAM9G45_BASE_US1,
1398 .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
1399 .flags = IORESOURCE_MEM,
1400 },
1401 [1] = {
1402 .start = AT91SAM9G45_ID_US1,
1403 .end = AT91SAM9G45_ID_US1,
1404 .flags = IORESOURCE_IRQ,
1405 },
1406 };
1407
1408 static struct atmel_uart_data uart1_data = {
1409 .use_dma_tx = 1,
1410 .use_dma_rx = 1,
1411 };
1412
1413 static u64 uart1_dmamask = DMA_BIT_MASK(32);
1414
1415 static struct platform_device at91sam9g45_uart1_device = {
1416 .name = "atmel_usart",
1417 .id = 2,
1418 .dev = {
1419 .dma_mask = &uart1_dmamask,
1420 .coherent_dma_mask = DMA_BIT_MASK(32),
1421 .platform_data = &uart1_data,
1422 },
1423 .resource = uart1_resources,
1424 .num_resources = ARRAY_SIZE(uart1_resources),
1425 };
1426
1427 static inline void configure_usart1_pins(unsigned pins)
1428 {
1429 at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
1430 at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
1431
1432 if (pins & ATMEL_UART_RTS)
1433 at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
1434 if (pins & ATMEL_UART_CTS)
1435 at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
1436 }
1437
1438 static struct resource uart2_resources[] = {
1439 [0] = {
1440 .start = AT91SAM9G45_BASE_US2,
1441 .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
1442 .flags = IORESOURCE_MEM,
1443 },
1444 [1] = {
1445 .start = AT91SAM9G45_ID_US2,
1446 .end = AT91SAM9G45_ID_US2,
1447 .flags = IORESOURCE_IRQ,
1448 },
1449 };
1450
1451 static struct atmel_uart_data uart2_data = {
1452 .use_dma_tx = 1,
1453 .use_dma_rx = 1,
1454 };
1455
1456 static u64 uart2_dmamask = DMA_BIT_MASK(32);
1457
1458 static struct platform_device at91sam9g45_uart2_device = {
1459 .name = "atmel_usart",
1460 .id = 3,
1461 .dev = {
1462 .dma_mask = &uart2_dmamask,
1463 .coherent_dma_mask = DMA_BIT_MASK(32),
1464 .platform_data = &uart2_data,
1465 },
1466 .resource = uart2_resources,
1467 .num_resources = ARRAY_SIZE(uart2_resources),
1468 };
1469
1470 static inline void configure_usart2_pins(unsigned pins)
1471 {
1472 at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
1473 at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
1474
1475 if (pins & ATMEL_UART_RTS)
1476 at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
1477 if (pins & ATMEL_UART_CTS)
1478 at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
1479 }
1480
1481 static struct resource uart3_resources[] = {
1482 [0] = {
1483 .start = AT91SAM9G45_BASE_US3,
1484 .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
1485 .flags = IORESOURCE_MEM,
1486 },
1487 [1] = {
1488 .start = AT91SAM9G45_ID_US3,
1489 .end = AT91SAM9G45_ID_US3,
1490 .flags = IORESOURCE_IRQ,
1491 },
1492 };
1493
1494 static struct atmel_uart_data uart3_data = {
1495 .use_dma_tx = 1,
1496 .use_dma_rx = 1,
1497 };
1498
1499 static u64 uart3_dmamask = DMA_BIT_MASK(32);
1500
1501 static struct platform_device at91sam9g45_uart3_device = {
1502 .name = "atmel_usart",
1503 .id = 4,
1504 .dev = {
1505 .dma_mask = &uart3_dmamask,
1506 .coherent_dma_mask = DMA_BIT_MASK(32),
1507 .platform_data = &uart3_data,
1508 },
1509 .resource = uart3_resources,
1510 .num_resources = ARRAY_SIZE(uart3_resources),
1511 };
1512
1513 static inline void configure_usart3_pins(unsigned pins)
1514 {
1515 at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
1516 at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
1517
1518 if (pins & ATMEL_UART_RTS)
1519 at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
1520 if (pins & ATMEL_UART_CTS)
1521 at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
1522 }
1523
1524 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
1525 struct platform_device *atmel_default_console_device; /* the serial console device */
1526
1527 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1528 {
1529 struct platform_device *pdev;
1530
1531 switch (id) {
1532 case 0: /* DBGU */
1533 pdev = &at91sam9g45_dbgu_device;
1534 configure_dbgu_pins();
1535 at91_clock_associate("mck", &pdev->dev, "usart");
1536 break;
1537 case AT91SAM9G45_ID_US0:
1538 pdev = &at91sam9g45_uart0_device;
1539 configure_usart0_pins(pins);
1540 at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1541 break;
1542 case AT91SAM9G45_ID_US1:
1543 pdev = &at91sam9g45_uart1_device;
1544 configure_usart1_pins(pins);
1545 at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1546 break;
1547 case AT91SAM9G45_ID_US2:
1548 pdev = &at91sam9g45_uart2_device;
1549 configure_usart2_pins(pins);
1550 at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1551 break;
1552 case AT91SAM9G45_ID_US3:
1553 pdev = &at91sam9g45_uart3_device;
1554 configure_usart3_pins(pins);
1555 at91_clock_associate("usart3_clk", &pdev->dev, "usart");
1556 break;
1557 default:
1558 return;
1559 }
1560 pdev->id = portnr; /* update to mapped ID */
1561
1562 if (portnr < ATMEL_MAX_UART)
1563 at91_uarts[portnr] = pdev;
1564 }
1565
1566 void __init at91_set_serial_console(unsigned portnr)
1567 {
1568 if (portnr < ATMEL_MAX_UART)
1569 atmel_default_console_device = at91_uarts[portnr];
1570 }
1571
1572 void __init at91_add_device_serial(void)
1573 {
1574 int i;
1575
1576 for (i = 0; i < ATMEL_MAX_UART; i++) {
1577 if (at91_uarts[i])
1578 platform_device_register(at91_uarts[i]);
1579 }
1580
1581 if (!atmel_default_console_device)
1582 printk(KERN_INFO "AT91: No default serial console defined.\n");
1583 }
1584 #else
1585 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1586 void __init at91_set_serial_console(unsigned portnr) {}
1587 void __init at91_add_device_serial(void) {}
1588 #endif
1589
1590
1591 /* -------------------------------------------------------------------- */
1592 /*
1593 * These devices are always present and don't need any board-specific
1594 * setup.
1595 */
1596 static int __init at91_add_standard_devices(void)
1597 {
1598 at91_add_device_hdmac();
1599 at91_add_device_rtc();
1600 at91_add_device_rtt();
1601 at91_add_device_watchdog();
1602 at91_add_device_tc();
1603 return 0;
1604 }
1605
1606 arch_initcall(at91_add_standard_devices);
Linux with added FPC-III support