Merge branch 'v6v7' into devel
[linux/fpc-iii.git] / arch / arm / mach-pxa / colibri-pxa270-income.c
blob07b62a096f1757f3f4d8e44220e264074494606c
1 /*
2 * linux/arch/arm/mach-pxa/income.c
4 * Support for Income s.r.o. SH-Dmaster PXA270 SBC
6 * Copyright (C) 2010
7 * Marek Vasut <marek.vasut@gmail.com>
8 * Pavel Revak <palo@bielyvlk.sk>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/bitops.h>
16 #include <linux/delay.h>
17 #include <linux/gpio.h>
18 #include <linux/init.h>
19 #include <linux/interrupt.h>
20 #include <linux/ioport.h>
21 #include <linux/kernel.h>
22 #include <linux/platform_device.h>
23 #include <linux/pwm_backlight.h>
24 #include <linux/sysdev.h>
26 #include <asm/irq.h>
27 #include <asm/mach-types.h>
29 #include <mach/hardware.h>
30 #include <mach/mmc.h>
31 #include <mach/ohci.h>
32 #include <mach/pxa27x.h>
33 #include <mach/pxa27x-udc.h>
34 #include <mach/pxafb.h>
36 #include <plat/i2c.h>
38 #include "devices.h"
39 #include "generic.h"
41 #define GPIO114_INCOME_ETH_IRQ (114)
42 #define GPIO0_INCOME_SD_DETECT (0)
43 #define GPIO0_INCOME_SD_RO (1)
44 #define GPIO54_INCOME_LED_A (54)
45 #define GPIO55_INCOME_LED_B (55)
46 #define GPIO113_INCOME_TS_IRQ (113)
48 /******************************************************************************
49 * SD/MMC card controller
50 ******************************************************************************/
51 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
52 static struct pxamci_platform_data income_mci_platform_data = {
53 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
54 .gpio_power = -1,
55 .gpio_card_detect = GPIO0_INCOME_SD_DETECT,
56 .gpio_card_ro = GPIO0_INCOME_SD_RO,
57 .detect_delay_ms = 200,
60 static void __init income_mmc_init(void)
62 pxa_set_mci_info(&income_mci_platform_data);
64 #else
65 static inline void income_mmc_init(void) {}
66 #endif
68 /******************************************************************************
69 * USB Host
70 ******************************************************************************/
71 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
72 static struct pxaohci_platform_data income_ohci_info = {
73 .port_mode = PMM_PERPORT_MODE,
74 .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
77 static void __init income_uhc_init(void)
79 pxa_set_ohci_info(&income_ohci_info);
81 #else
82 static inline void income_uhc_init(void) {}
83 #endif
85 /******************************************************************************
86 * LED
87 ******************************************************************************/
88 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
89 struct gpio_led income_gpio_leds[] = {
91 .name = "income:green:leda",
92 .default_trigger = "none",
93 .gpio = GPIO54_INCOME_LED_A,
94 .active_low = 1,
97 .name = "income:green:ledb",
98 .default_trigger = "none",
99 .gpio = GPIO55_INCOME_LED_B,
100 .active_low = 1,
104 static struct gpio_led_platform_data income_gpio_led_info = {
105 .leds = income_gpio_leds,
106 .num_leds = ARRAY_SIZE(income_gpio_leds),
109 static struct platform_device income_leds = {
110 .name = "leds-gpio",
111 .id = -1,
112 .dev = {
113 .platform_data = &income_gpio_led_info,
117 static void __init income_led_init(void)
119 platform_device_register(&income_leds);
121 #else
122 static inline void income_led_init(void) {}
123 #endif
125 /******************************************************************************
126 * I2C
127 ******************************************************************************/
128 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
129 static struct i2c_board_info __initdata income_i2c_devs[] = {
131 I2C_BOARD_INFO("ds1340", 0x68),
132 }, {
133 I2C_BOARD_INFO("lm75", 0x4f),
137 static void __init income_i2c_init(void)
139 pxa_set_i2c_info(NULL);
140 pxa27x_set_i2c_power_info(NULL);
141 i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
143 #else
144 static inline void income_i2c_init(void) {}
145 #endif
147 /******************************************************************************
148 * Framebuffer
149 ******************************************************************************/
150 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
151 static struct pxafb_mode_info income_lcd_modes[] = {
153 .pixclock = 144700,
154 .xres = 320,
155 .yres = 240,
156 .bpp = 32,
157 .depth = 18,
159 .left_margin = 10,
160 .right_margin = 10,
161 .upper_margin = 7,
162 .lower_margin = 8,
164 .hsync_len = 20,
165 .vsync_len = 2,
167 .sync = FB_SYNC_VERT_HIGH_ACT,
171 static struct pxafb_mach_info income_lcd_screen = {
172 .modes = income_lcd_modes,
173 .num_modes = ARRAY_SIZE(income_lcd_modes),
174 .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
177 static void __init income_lcd_init(void)
179 set_pxa_fb_info(&income_lcd_screen);
181 #else
182 static inline void income_lcd_init(void) {}
183 #endif
185 /******************************************************************************
186 * Backlight
187 ******************************************************************************/
188 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
189 static struct platform_pwm_backlight_data income_backlight_data = {
190 .pwm_id = 0,
191 .max_brightness = 0x3ff,
192 .dft_brightness = 0x1ff,
193 .pwm_period_ns = 1000000,
196 static struct platform_device income_backlight = {
197 .name = "pwm-backlight",
198 .dev = {
199 .parent = &pxa27x_device_pwm0.dev,
200 .platform_data = &income_backlight_data,
204 static void __init income_pwm_init(void)
206 platform_device_register(&income_backlight);
208 #else
209 static inline void income_pwm_init(void) {}
210 #endif
212 void __init colibri_pxa270_income_boardinit(void)
214 pxa_set_ffuart_info(NULL);
215 pxa_set_btuart_info(NULL);
216 pxa_set_stuart_info(NULL);
218 income_mmc_init();
219 income_uhc_init();
220 income_led_init();
221 income_i2c_init();
222 income_lcd_init();
223 income_pwm_init();