arch/arm/mach-realview/platsmp.c

   1 /*
   2  *  linux/arch/arm/mach-realview/platsmp.c
   3  *
   4  *  Copyright (C) 2002 ARM Ltd.
   5  *  All Rights Reserved
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11 #include <linux/init.h>
  12 #include <linux/errno.h>
  13 #include <linux/delay.h>
  14 #include <linux/device.h>
  15 #include <linux/jiffies.h>
  16 #include <linux/smp.h>
  17 #include <linux/io.h>
  18
  19 #include <asm/cacheflush.h>
  20 #include <mach/hardware.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/unified.h>
  23
  24 #include <mach/board-eb.h>
  25 #include <mach/board-pb11mp.h>
  26 #include <mach/board-pbx.h>
  27 #include <asm/smp_scu.h>
  28
  29 #include "core.h"
  30
  31 extern void realview_secondary_startup(void);
  32
  33 /*
  34  * control for which core is the next to come out of the secondary
  35  * boot "holding pen"
  36  */
  37 volatile int __cpuinitdata pen_release = -1;
  38
  39 /*
  40  * Write pen_release in a way that is guaranteed to be visible to all
  41  * observers, irrespective of whether they're taking part in coherency
  42  * or not.  This is necessary for the hotplug code to work reliably.
  43  */
  44 static void __cpuinit write_pen_release(int val)
  45 {
  46         pen_release = val;
  47         smp_wmb();
  48         __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
  49         outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
  50 }
  51
  52 static void __iomem *scu_base_addr(void)
  53 {
  54         if (machine_is_realview_eb_mp())
  55                 return __io_address(REALVIEW_EB11MP_SCU_BASE);
  56         else if (machine_is_realview_pb11mp())
  57                 return __io_address(REALVIEW_TC11MP_SCU_BASE);
  58         else if (machine_is_realview_pbx() &&
  59                  (core_tile_pbx11mp() || core_tile_pbxa9mp()))
  60                 return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
  61         else
  62                 return (void __iomem *)0;
  63 }
  64
  65 static DEFINE_SPINLOCK(boot_lock);
  66
  67 void __cpuinit platform_secondary_init(unsigned int cpu)
  68 {
  69         /*
  70          * if any interrupts are already enabled for the primary
  71          * core (e.g. timer irq), then they will not have been enabled
  72          * for us: do so
  73          */
  74         gic_secondary_init(0);
  75
  76         /*
  77          * let the primary processor know we're out of the
  78          * pen, then head off into the C entry point
  79          */
  80         write_pen_release(-1);
  81
  82         /*
  83          * Synchronise with the boot thread.
  84          */
  85         spin_lock(&boot_lock);
  86         spin_unlock(&boot_lock);
  87 }
  88
  89 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  90 {
  91         unsigned long timeout;
  92
  93         /*
  94          * set synchronisation state between this boot processor
  95          * and the secondary one
  96          */
  97         spin_lock(&boot_lock);
  98
  99         /*
 100          * The secondary processor is waiting to be released from
 101          * the holding pen - release it, then wait for it to flag
 102          * that it has been released by resetting pen_release.
 103          *
 104          * Note that "pen_release" is the hardware CPU ID, whereas
 105          * "cpu" is Linux's internal ID.
 106          */
 107         write_pen_release(cpu);
 108
 109         /*
 110          * Send the secondary CPU a soft interrupt, thereby causing
 111          * the boot monitor to read the system wide flags register,
 112          * and branch to the address found there.
 113          */
 114         smp_cross_call(cpumask_of(cpu), 1);
 115
 116         timeout = jiffies + (1 * HZ);
 117         while (time_before(jiffies, timeout)) {
 118                 smp_rmb();
 119                 if (pen_release == -1)
 120                         break;
 121
 122                 udelay(10);
 123         }
 124
 125         /*
 126          * now the secondary core is starting up let it run its
 127          * calibrations, then wait for it to finish
 128          */
 129         spin_unlock(&boot_lock);
 130
 131         return pen_release != -1 ? -ENOSYS : 0;
 132 }
 133
 134 /*
 135  * Initialise the CPU possible map early - this describes the CPUs
 136  * which may be present or become present in the system.
 137  */
 138 void __init smp_init_cpus(void)
 139 {
 140         void __iomem *scu_base = scu_base_addr();
 141         unsigned int i, ncores;
 142
 143         ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 144
 145         /* sanity check */
 146         if (ncores > NR_CPUS) {
 147                 printk(KERN_WARNING
 148                        "Realview: no. of cores (%d) greater than configured "
 149                        "maximum of %d - clipping\n",
 150                        ncores, NR_CPUS);
 151                 ncores = NR_CPUS;
 152         }
 153
 154         for (i = 0; i < ncores; i++)
 155                 set_cpu_possible(i, true);
 156 }
 157
 158 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 159 {
 160         int i;
 161
 162         /*
 163          * Initialise the present map, which describes the set of CPUs
 164          * actually populated at the present time.
 165          */
 166         for (i = 0; i < max_cpus; i++)
 167                 set_cpu_present(i, true);
 168
 169         scu_enable(scu_base_addr());
 170
 171         /*
 172          * Write the address of secondary startup into the
 173          * system-wide flags register. The BootMonitor waits
 174          * until it receives a soft interrupt, and then the
 175          * secondary CPU branches to this address.
 176          */
 177         __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
 178                      __io_address(REALVIEW_SYS_FLAGSSET));
 179 }