arch/arm/plat-s3c24xx/include/plat/map.h

   1 /* linux/include/asm-arm/plat-s3c24xx/map.h
   2  *
   3  * Copyright (c) 2008 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C24XX - Memory map definitions
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11 */
  12
  13 #ifndef __ASM_PLAT_S3C24XX_MAP_H
  14 #define __ASM_PLAT_S3C24XX_MAP_H
  15
  16 /* interrupt controller is the first thing we put in, to make
  17  * the assembly code for the irq detection easier
  18  */
  19 #define S3C24XX_VA_IRQ     S3C_VA_IRQ
  20 #define S3C2410_PA_IRQ     (0x4A000000)
  21 #define S3C24XX_SZ_IRQ     SZ_1M
  22
  23 /* memory controller registers */
  24 #define S3C24XX_VA_MEMCTRL S3C_VA_MEM
  25 #define S3C2410_PA_MEMCTRL (0x48000000)
  26 #define S3C24XX_SZ_MEMCTRL SZ_1M
  27
  28 /* UARTs */
  29 #define S3C24XX_VA_UART    S3C_VA_UART
  30 #define S3C2410_PA_UART    (0x50000000)
  31 #define S3C24XX_SZ_UART    SZ_1M
  32 #define S3C_UART_OFFSET    (0x4000)
  33
  34 #define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
  35
  36 /* Timers */
  37 #define S3C24XX_VA_TIMER   S3C_VA_TIMER
  38 #define S3C2410_PA_TIMER   (0x51000000)
  39 #define S3C24XX_SZ_TIMER   SZ_1M
  40
  41 /* Clock and Power management */
  42 #define S3C24XX_VA_CLKPWR  S3C_VA_SYS
  43 #define S3C24XX_SZ_CLKPWR  SZ_1M
  44
  45 /* USB Device port */
  46 #define S3C2410_PA_USBDEV  (0x52000000)
  47 #define S3C24XX_SZ_USBDEV  SZ_1M
  48
  49 /* Watchdog */
  50 #define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
  51 #define S3C2410_PA_WATCHDOG (0x53000000)
  52 #define S3C24XX_SZ_WATCHDOG SZ_1M
  53
  54 /* Standard size definitions for peripheral blocks. */
  55
  56 #define S3C24XX_SZ_IIS          SZ_1M
  57 #define S3C24XX_SZ_ADC          SZ_1M
  58 #define S3C24XX_SZ_SPI          SZ_1M
  59 #define S3C24XX_SZ_SDI          SZ_1M
  60 #define S3C24XX_SZ_NAND         SZ_1M
  61
  62 /* GPIO ports */
  63
  64 /* the calculation for the VA of this must ensure that
  65  * it is the same distance apart from the UART in the
  66  * phsyical address space, as the initial mapping for the IO
  67  * is done as a 1:1 mapping. This puts it (currently) at
  68  * 0xFA800000, which is not in the way of any current mapping
  69  * by the base system.
  70 */
  71
  72 #define S3C2410_PA_GPIO    (0x56000000)
  73 #define S3C24XX_VA_GPIO    ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
  74 #define S3C24XX_SZ_GPIO    SZ_1M
  75
  76
  77 /* ISA style IO, for each machine to sort out mappings for, if it
  78  * implements it. We reserve two 16M regions for ISA.
  79  */
  80
  81 #define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
  82 #define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
  83
  84 /* deal with the registers that move under the 2412/2413 */
  85
  86 #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
  87 #ifndef __ASSEMBLY__
  88 extern void __iomem *s3c24xx_va_gpio2;
  89 #endif
  90 #ifdef CONFIG_CPU_S3C2412_ONLY
  91 #define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
  92 #else
  93 #define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
  94 #endif
  95 #else
  96 #define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
  97 #define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
  98 #endif
  99
 100 #endif /* __ASM_PLAT_S3C24XX_MAP_H */