1 /*********************************************************************
5 * Description: IrLAP QoS parameter negotiation
7 * Author: Dag Brattli <dagb@cs.uit.no>
8 * Created at: Tue Sep 9 00:00:26 1997
9 * Modified at: Sun Jan 30 14:29:16 2000
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
12 * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
13 * All Rights Reserved.
14 * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of
19 * the License, or (at your option) any later version.
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, see <http://www.gnu.org/licenses/>.
29 ********************************************************************/
31 #include <linux/export.h>
33 #include <asm/byteorder.h>
35 #include <net/irda/irda.h>
36 #include <net/irda/parameters.h>
37 #include <net/irda/qos.h>
38 #include <net/irda/irlap.h>
39 #include <net/irda/irlap_frame.h>
42 * Maximum values of the baud rate we negotiate with the other end.
43 * Most often, you don't have to change that, because Linux-IrDA will
44 * use the maximum offered by the link layer, which usually works fine.
45 * In some very rare cases, you may want to limit it to lower speeds...
47 int sysctl_max_baud_rate
= 16000000;
49 * Maximum value of the lap disconnect timer we negotiate with the other end.
50 * Most often, the value below represent the best compromise, but some user
51 * may want to keep the LAP alive longer or shorter in case of link failure.
52 * Remember that the threshold time (early warning) is fixed to 3s...
54 int sysctl_max_noreply_time
= 12;
56 * Minimum turn time to be applied before transmitting to the peer.
57 * Nonzero values (usec) are used as lower limit to the per-connection
58 * mtt value which was announced by the other end during negotiation.
59 * Might be helpful if the peer device provides too short mtt.
60 * Default is 10us which means using the unmodified value given by the
61 * peer except if it's 0 (0 is likely a bug in the other stack).
63 unsigned int sysctl_min_tx_turn_time
= 10;
65 * Maximum data size to be used in transmission in payload of LAP frame.
66 * There is a bit of confusion in the IrDA spec :
67 * The LAP spec defines the payload of a LAP frame (I field) to be
68 * 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40).
69 * On the other hand, the PHY mention frames of 2048 bytes max (IrPHY
70 * 1.2, chapt 5.3.2.1, p41). But, this number includes the LAP header
71 * (2 bytes), and CRC (32 bits at 4 Mb/s). So, for the I field (LAP
72 * payload), that's only 2042 bytes. Oups !
73 * My nsc-ircc hardware has troubles receiving 2048 bytes frames at 4 Mb/s,
74 * so adjust to 2042... I don't know if this bug applies only for 2048
75 * bytes frames or all negotiated frame sizes, but you can use the sysctl
76 * to play with this value anyway.
78 unsigned int sysctl_max_tx_data_size
= 2042;
80 * Maximum transmit window, i.e. number of LAP frames between turn-around.
81 * This allow to override what the peer told us. Some peers are buggy and
82 * don't always support what they tell us.
84 unsigned int sysctl_max_tx_window
= 7;
86 static int irlap_param_baud_rate(void *instance
, irda_param_t
*param
, int get
);
87 static int irlap_param_link_disconnect(void *instance
, irda_param_t
*parm
,
89 static int irlap_param_max_turn_time(void *instance
, irda_param_t
*param
,
91 static int irlap_param_data_size(void *instance
, irda_param_t
*param
, int get
);
92 static int irlap_param_window_size(void *instance
, irda_param_t
*param
,
94 static int irlap_param_additional_bofs(void *instance
, irda_param_t
*parm
,
96 static int irlap_param_min_turn_time(void *instance
, irda_param_t
*param
,
99 #ifndef CONFIG_IRDA_DYNAMIC_WINDOW
100 static __u32
irlap_requested_line_capacity(struct qos_info
*qos
);
103 static __u32 min_turn_times
[] = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */
104 static __u32 baud_rates
[] = { 2400, 9600, 19200, 38400, 57600, 115200, 576000,
105 1152000, 4000000, 16000000 }; /* bps */
106 static __u32 data_sizes
[] = { 64, 128, 256, 512, 1024, 2048 }; /* bytes */
107 static __u32 add_bofs
[] = { 48, 24, 12, 5, 3, 2, 1, 0 }; /* bytes */
108 static __u32 max_turn_times
[] = { 500, 250, 100, 50 }; /* ms */
109 static __u32 link_disc_times
[] = { 3, 8, 12, 16, 20, 25, 30, 40 }; /* secs */
111 static __u32 max_line_capacities
[10][4] = {
112 /* 500 ms 250 ms 100 ms 50 ms (max turn time) */
113 { 100, 0, 0, 0 }, /* 2400 bps */
114 { 400, 0, 0, 0 }, /* 9600 bps */
115 { 800, 0, 0, 0 }, /* 19200 bps */
116 { 1600, 0, 0, 0 }, /* 38400 bps */
117 { 2360, 0, 0, 0 }, /* 57600 bps */
118 { 4800, 2400, 960, 480 }, /* 115200 bps */
119 { 28800, 11520, 5760, 2880 }, /* 576000 bps */
120 { 57600, 28800, 11520, 5760 }, /* 1152000 bps */
121 { 200000, 100000, 40000, 20000 }, /* 4000000 bps */
122 { 800000, 400000, 160000, 80000 }, /* 16000000 bps */
125 static pi_minor_info_t pi_minor_call_table_type_0
[] = {
127 /* 01 */{ irlap_param_baud_rate
, PV_INTEGER
| PV_LITTLE_ENDIAN
},
134 /* 08 */{ irlap_param_link_disconnect
, PV_INT_8_BITS
}
137 static pi_minor_info_t pi_minor_call_table_type_1
[] = {
140 /* 82 */{ irlap_param_max_turn_time
, PV_INT_8_BITS
},
141 /* 83 */{ irlap_param_data_size
, PV_INT_8_BITS
},
142 /* 84 */{ irlap_param_window_size
, PV_INT_8_BITS
},
143 /* 85 */{ irlap_param_additional_bofs
, PV_INT_8_BITS
},
144 /* 86 */{ irlap_param_min_turn_time
, PV_INT_8_BITS
},
147 static pi_major_info_t pi_major_call_table
[] = {
148 { pi_minor_call_table_type_0
, 9 },
149 { pi_minor_call_table_type_1
, 7 },
152 static pi_param_info_t irlap_param_info
= { pi_major_call_table
, 2, 0x7f, 7 };
154 /* ---------------------- LOCAL SUBROUTINES ---------------------- */
155 /* Note : we start with a bunch of local subroutines.
156 * As the compiler is "one pass", this is the only way to get them to
161 * Function value_index (value, array, size)
163 * Returns the index to the value in the specified array
165 static inline int value_index(__u32 value
, __u32
*array
, int size
)
169 for (i
=0; i
< size
; i
++)
170 if (array
[i
] == value
)
176 * Function index_value (index, array)
178 * Returns value to index in array, easy!
181 static inline __u32
index_value(int index
, __u32
*array
)
187 * Function msb_index (word)
189 * Returns index to most significant bit (MSB) in word
192 static int msb_index (__u16 word
)
195 int index
= 15; /* Current MSB */
197 /* Check for buggy peers.
198 * Note : there is a small probability that it could be us, but I
199 * would expect driver authors to catch that pretty early and be
200 * able to check precisely what's going on. If a end user sees this,
201 * it's very likely the peer. - Jean II */
203 IRDA_WARNING("%s(), Detected buggy peer, adjust null PV to 0x1!\n",
205 /* The only safe choice (we don't know the array size) */
211 break; /* Found it! */
219 * Function value_lower_bits (value, array)
221 * Returns a bit field marking all possibility lower than value.
223 static inline int value_lower_bits(__u32 value
, __u32
*array
, int size
, __u16
*field
)
229 for (i
=0; i
< size
; i
++) {
230 /* Add the current value to the bit field, shift mask */
234 if (array
[i
] >= value
)
237 /* Send back a valid index */
239 i
= size
- 1; /* Last item */
245 * Function value_highest_bit (value, array)
247 * Returns a bit field marking the highest possibility lower than value.
249 static inline int value_highest_bit(__u32 value
, __u32
*array
, int size
, __u16
*field
)
255 for (i
=0; i
< size
; i
++) {
257 if (array
[i
] <= value
)
262 /* Set the current value to the bit field */
264 /* Send back a valid index */
266 i
= size
- 1; /* Last item */
271 /* -------------------------- MAIN CALLS -------------------------- */
274 * Function irda_qos_compute_intersection (qos, new)
276 * Compute the intersection of the old QoS capabilities with new ones
279 void irda_qos_compute_intersection(struct qos_info
*qos
, struct qos_info
*new)
281 IRDA_ASSERT(qos
!= NULL
, return;);
282 IRDA_ASSERT(new != NULL
, return;);
285 qos
->baud_rate
.bits
&= new->baud_rate
.bits
;
286 qos
->window_size
.bits
&= new->window_size
.bits
;
287 qos
->min_turn_time
.bits
&= new->min_turn_time
.bits
;
288 qos
->max_turn_time
.bits
&= new->max_turn_time
.bits
;
289 qos
->data_size
.bits
&= new->data_size
.bits
;
290 qos
->link_disc_time
.bits
&= new->link_disc_time
.bits
;
291 qos
->additional_bofs
.bits
&= new->additional_bofs
.bits
;
293 irda_qos_bits_to_value(qos
);
297 * Function irda_init_max_qos_capabilies (qos)
299 * The purpose of this function is for layers and drivers to be able to
300 * set the maximum QoS possible and then "and in" their own limitations
303 void irda_init_max_qos_capabilies(struct qos_info
*qos
)
307 * These are the maximum supported values as specified on pages
311 /* Use sysctl to set some configurable values... */
312 /* Set configured max speed */
313 i
= value_lower_bits(sysctl_max_baud_rate
, baud_rates
, 10,
314 &qos
->baud_rate
.bits
);
315 sysctl_max_baud_rate
= index_value(i
, baud_rates
);
317 /* Set configured max disc time */
318 i
= value_lower_bits(sysctl_max_noreply_time
, link_disc_times
, 8,
319 &qos
->link_disc_time
.bits
);
320 sysctl_max_noreply_time
= index_value(i
, link_disc_times
);
322 /* LSB is first byte, MSB is second byte */
323 qos
->baud_rate
.bits
&= 0x03ff;
325 qos
->window_size
.bits
= 0x7f;
326 qos
->min_turn_time
.bits
= 0xff;
327 qos
->max_turn_time
.bits
= 0x0f;
328 qos
->data_size
.bits
= 0x3f;
329 qos
->link_disc_time
.bits
&= 0xff;
330 qos
->additional_bofs
.bits
= 0xff;
332 EXPORT_SYMBOL(irda_init_max_qos_capabilies
);
335 * Function irlap_adjust_qos_settings (qos)
337 * Adjust QoS settings in case some values are not possible to use because
340 static void irlap_adjust_qos_settings(struct qos_info
*qos
)
345 IRDA_DEBUG(2, "%s()\n", __func__
);
348 * Make sure the mintt is sensible.
349 * Main culprit : Ericsson T39. - Jean II
351 if (sysctl_min_tx_turn_time
> qos
->min_turn_time
.value
) {
354 IRDA_WARNING("%s(), Detected buggy peer, adjust mtt to %dus!\n",
355 __func__
, sysctl_min_tx_turn_time
);
357 /* We don't really need bits, but easier this way */
358 i
= value_highest_bit(sysctl_min_tx_turn_time
, min_turn_times
,
359 8, &qos
->min_turn_time
.bits
);
360 sysctl_min_tx_turn_time
= index_value(i
, min_turn_times
);
361 qos
->min_turn_time
.value
= sysctl_min_tx_turn_time
;
365 * Not allowed to use a max turn time less than 500 ms if the baudrate
366 * is less than 115200
368 if ((qos
->baud_rate
.value
< 115200) &&
369 (qos
->max_turn_time
.value
< 500))
372 "%s(), adjusting max turn time from %d to 500 ms\n",
373 __func__
, qos
->max_turn_time
.value
);
374 qos
->max_turn_time
.value
= 500;
378 * The data size must be adjusted according to the baud rate and max
381 index
= value_index(qos
->data_size
.value
, data_sizes
, 6);
382 line_capacity
= irlap_max_line_capacity(qos
->baud_rate
.value
,
383 qos
->max_turn_time
.value
);
385 #ifdef CONFIG_IRDA_DYNAMIC_WINDOW
386 while ((qos
->data_size
.value
> line_capacity
) && (index
> 0)) {
387 qos
->data_size
.value
= data_sizes
[index
--];
388 IRDA_DEBUG(2, "%s(), reducing data size to %d\n",
389 __func__
, qos
->data_size
.value
);
391 #else /* Use method described in section 6.6.11 of IrLAP */
392 while (irlap_requested_line_capacity(qos
) > line_capacity
) {
393 IRDA_ASSERT(index
!= 0, return;);
395 /* Must be able to send at least one frame */
396 if (qos
->window_size
.value
> 1) {
397 qos
->window_size
.value
--;
398 IRDA_DEBUG(2, "%s(), reducing window size to %d\n",
399 __func__
, qos
->window_size
.value
);
400 } else if (index
> 1) {
401 qos
->data_size
.value
= data_sizes
[index
--];
402 IRDA_DEBUG(2, "%s(), reducing data size to %d\n",
403 __func__
, qos
->data_size
.value
);
405 IRDA_WARNING("%s(), nothing more we can do!\n",
409 #endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
411 * Fix tx data size according to user limits - Jean II
413 if (qos
->data_size
.value
> sysctl_max_tx_data_size
)
414 /* Allow non discrete adjustement to avoid losing capacity */
415 qos
->data_size
.value
= sysctl_max_tx_data_size
;
417 * Override Tx window if user request it. - Jean II
419 if (qos
->window_size
.value
> sysctl_max_tx_window
)
420 qos
->window_size
.value
= sysctl_max_tx_window
;
424 * Function irlap_negotiate (qos_device, qos_session, skb)
426 * Negotiate QoS values, not really that much negotiation :-)
427 * We just set the QoS capabilities for the peer station
430 int irlap_qos_negotiate(struct irlap_cb
*self
, struct sk_buff
*skb
)
434 ret
= irda_param_extract_all(self
, skb
->data
, skb
->len
,
437 /* Convert the negotiated bits to values */
438 irda_qos_bits_to_value(&self
->qos_tx
);
439 irda_qos_bits_to_value(&self
->qos_rx
);
441 irlap_adjust_qos_settings(&self
->qos_tx
);
443 IRDA_DEBUG(2, "Setting BAUD_RATE to %d bps.\n",
444 self
->qos_tx
.baud_rate
.value
);
445 IRDA_DEBUG(2, "Setting DATA_SIZE to %d bytes\n",
446 self
->qos_tx
.data_size
.value
);
447 IRDA_DEBUG(2, "Setting WINDOW_SIZE to %d\n",
448 self
->qos_tx
.window_size
.value
);
449 IRDA_DEBUG(2, "Setting XBOFS to %d\n",
450 self
->qos_tx
.additional_bofs
.value
);
451 IRDA_DEBUG(2, "Setting MAX_TURN_TIME to %d ms.\n",
452 self
->qos_tx
.max_turn_time
.value
);
453 IRDA_DEBUG(2, "Setting MIN_TURN_TIME to %d usecs.\n",
454 self
->qos_tx
.min_turn_time
.value
);
455 IRDA_DEBUG(2, "Setting LINK_DISC to %d secs.\n",
456 self
->qos_tx
.link_disc_time
.value
);
461 * Function irlap_insert_negotiation_params (qos, fp)
463 * Insert QoS negotiaion pararameters into frame
466 int irlap_insert_qos_negotiation_params(struct irlap_cb
*self
,
471 /* Insert data rate */
472 ret
= irda_param_insert(self
, PI_BAUD_RATE
, skb_tail_pointer(skb
),
473 skb_tailroom(skb
), &irlap_param_info
);
478 /* Insert max turnaround time */
479 ret
= irda_param_insert(self
, PI_MAX_TURN_TIME
, skb_tail_pointer(skb
),
480 skb_tailroom(skb
), &irlap_param_info
);
485 /* Insert data size */
486 ret
= irda_param_insert(self
, PI_DATA_SIZE
, skb_tail_pointer(skb
),
487 skb_tailroom(skb
), &irlap_param_info
);
492 /* Insert window size */
493 ret
= irda_param_insert(self
, PI_WINDOW_SIZE
, skb_tail_pointer(skb
),
494 skb_tailroom(skb
), &irlap_param_info
);
499 /* Insert additional BOFs */
500 ret
= irda_param_insert(self
, PI_ADD_BOFS
, skb_tail_pointer(skb
),
501 skb_tailroom(skb
), &irlap_param_info
);
506 /* Insert minimum turnaround time */
507 ret
= irda_param_insert(self
, PI_MIN_TURN_TIME
, skb_tail_pointer(skb
),
508 skb_tailroom(skb
), &irlap_param_info
);
513 /* Insert link disconnect/threshold time */
514 ret
= irda_param_insert(self
, PI_LINK_DISC
, skb_tail_pointer(skb
),
515 skb_tailroom(skb
), &irlap_param_info
);
524 * Function irlap_param_baud_rate (instance, param, get)
526 * Negotiate data-rate
529 static int irlap_param_baud_rate(void *instance
, irda_param_t
*param
, int get
)
533 struct irlap_cb
*self
= (struct irlap_cb
*) instance
;
535 IRDA_ASSERT(self
!= NULL
, return -1;);
536 IRDA_ASSERT(self
->magic
== LAP_MAGIC
, return -1;);
539 param
->pv
.i
= self
->qos_rx
.baud_rate
.bits
;
540 IRDA_DEBUG(2, "%s(), baud rate = 0x%02x\n",
541 __func__
, param
->pv
.i
);
544 * Stations must agree on baud rate, so calculate
547 IRDA_DEBUG(2, "Requested BAUD_RATE: 0x%04x\n", (__u16
) param
->pv
.i
);
548 final
= (__u16
) param
->pv
.i
& self
->qos_rx
.baud_rate
.bits
;
550 IRDA_DEBUG(2, "Final BAUD_RATE: 0x%04x\n", final
);
551 self
->qos_tx
.baud_rate
.bits
= final
;
552 self
->qos_rx
.baud_rate
.bits
= final
;
559 * Function irlap_param_link_disconnect (instance, param, get)
561 * Negotiate link disconnect/threshold time.
564 static int irlap_param_link_disconnect(void *instance
, irda_param_t
*param
,
569 struct irlap_cb
*self
= (struct irlap_cb
*) instance
;
571 IRDA_ASSERT(self
!= NULL
, return -1;);
572 IRDA_ASSERT(self
->magic
== LAP_MAGIC
, return -1;);
575 param
->pv
.i
= self
->qos_rx
.link_disc_time
.bits
;
578 * Stations must agree on link disconnect/threshold
581 IRDA_DEBUG(2, "LINK_DISC: %02x\n", (__u8
) param
->pv
.i
);
582 final
= (__u8
) param
->pv
.i
& self
->qos_rx
.link_disc_time
.bits
;
584 IRDA_DEBUG(2, "Final LINK_DISC: %02x\n", final
);
585 self
->qos_tx
.link_disc_time
.bits
= final
;
586 self
->qos_rx
.link_disc_time
.bits
= final
;
592 * Function irlap_param_max_turn_time (instance, param, get)
594 * Negotiate the maximum turnaround time. This is a type 1 parameter and
595 * will be negotiated independently for each station
598 static int irlap_param_max_turn_time(void *instance
, irda_param_t
*param
,
601 struct irlap_cb
*self
= (struct irlap_cb
*) instance
;
603 IRDA_ASSERT(self
!= NULL
, return -1;);
604 IRDA_ASSERT(self
->magic
== LAP_MAGIC
, return -1;);
607 param
->pv
.i
= self
->qos_rx
.max_turn_time
.bits
;
609 self
->qos_tx
.max_turn_time
.bits
= (__u8
) param
->pv
.i
;
615 * Function irlap_param_data_size (instance, param, get)
617 * Negotiate the data size. This is a type 1 parameter and
618 * will be negotiated independently for each station
621 static int irlap_param_data_size(void *instance
, irda_param_t
*param
, int get
)
623 struct irlap_cb
*self
= (struct irlap_cb
*) instance
;
625 IRDA_ASSERT(self
!= NULL
, return -1;);
626 IRDA_ASSERT(self
->magic
== LAP_MAGIC
, return -1;);
629 param
->pv
.i
= self
->qos_rx
.data_size
.bits
;
631 self
->qos_tx
.data_size
.bits
= (__u8
) param
->pv
.i
;
637 * Function irlap_param_window_size (instance, param, get)
639 * Negotiate the window size. This is a type 1 parameter and
640 * will be negotiated independently for each station
643 static int irlap_param_window_size(void *instance
, irda_param_t
*param
,
646 struct irlap_cb
*self
= (struct irlap_cb
*) instance
;
648 IRDA_ASSERT(self
!= NULL
, return -1;);
649 IRDA_ASSERT(self
->magic
== LAP_MAGIC
, return -1;);
652 param
->pv
.i
= self
->qos_rx
.window_size
.bits
;
654 self
->qos_tx
.window_size
.bits
= (__u8
) param
->pv
.i
;
660 * Function irlap_param_additional_bofs (instance, param, get)
662 * Negotiate additional BOF characters. This is a type 1 parameter and
663 * will be negotiated independently for each station.
665 static int irlap_param_additional_bofs(void *instance
, irda_param_t
*param
, int get
)
667 struct irlap_cb
*self
= (struct irlap_cb
*) instance
;
669 IRDA_ASSERT(self
!= NULL
, return -1;);
670 IRDA_ASSERT(self
->magic
== LAP_MAGIC
, return -1;);
673 param
->pv
.i
= self
->qos_rx
.additional_bofs
.bits
;
675 self
->qos_tx
.additional_bofs
.bits
= (__u8
) param
->pv
.i
;
681 * Function irlap_param_min_turn_time (instance, param, get)
683 * Negotiate the minimum turn around time. This is a type 1 parameter and
684 * will be negotiated independently for each station
686 static int irlap_param_min_turn_time(void *instance
, irda_param_t
*param
,
689 struct irlap_cb
*self
= (struct irlap_cb
*) instance
;
691 IRDA_ASSERT(self
!= NULL
, return -1;);
692 IRDA_ASSERT(self
->magic
== LAP_MAGIC
, return -1;);
695 param
->pv
.i
= self
->qos_rx
.min_turn_time
.bits
;
697 self
->qos_tx
.min_turn_time
.bits
= (__u8
) param
->pv
.i
;
703 * Function irlap_max_line_capacity (speed, max_turn_time, min_turn_time)
705 * Calculate the maximum line capacity
708 __u32
irlap_max_line_capacity(__u32 speed
, __u32 max_turn_time
)
713 IRDA_DEBUG(2, "%s(), speed=%d, max_turn_time=%d\n",
714 __func__
, speed
, max_turn_time
);
716 i
= value_index(speed
, baud_rates
, 10);
717 j
= value_index(max_turn_time
, max_turn_times
, 4);
719 IRDA_ASSERT(((i
>=0) && (i
<10)), return 0;);
720 IRDA_ASSERT(((j
>=0) && (j
<4)), return 0;);
722 line_capacity
= max_line_capacities
[i
][j
];
724 IRDA_DEBUG(2, "%s(), line capacity=%d bytes\n",
725 __func__
, line_capacity
);
727 return line_capacity
;
730 #ifndef CONFIG_IRDA_DYNAMIC_WINDOW
731 static __u32
irlap_requested_line_capacity(struct qos_info
*qos
)
735 line_capacity
= qos
->window_size
.value
*
736 (qos
->data_size
.value
+ 6 + qos
->additional_bofs
.value
) +
737 irlap_min_turn_time_in_bytes(qos
->baud_rate
.value
,
738 qos
->min_turn_time
.value
);
740 IRDA_DEBUG(2, "%s(), requested line capacity=%d\n",
741 __func__
, line_capacity
);
743 return line_capacity
;
747 void irda_qos_bits_to_value(struct qos_info
*qos
)
751 IRDA_ASSERT(qos
!= NULL
, return;);
753 index
= msb_index(qos
->baud_rate
.bits
);
754 qos
->baud_rate
.value
= baud_rates
[index
];
756 index
= msb_index(qos
->data_size
.bits
);
757 qos
->data_size
.value
= data_sizes
[index
];
759 index
= msb_index(qos
->window_size
.bits
);
760 qos
->window_size
.value
= index
+1;
762 index
= msb_index(qos
->min_turn_time
.bits
);
763 qos
->min_turn_time
.value
= min_turn_times
[index
];
765 index
= msb_index(qos
->max_turn_time
.bits
);
766 qos
->max_turn_time
.value
= max_turn_times
[index
];
768 index
= msb_index(qos
->link_disc_time
.bits
);
769 qos
->link_disc_time
.value
= link_disc_times
[index
];
771 index
= msb_index(qos
->additional_bofs
.bits
);
772 qos
->additional_bofs
.value
= add_bofs
[index
];
774 EXPORT_SYMBOL(irda_qos_bits_to_value
);