?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
staging: vboxvideo: Add vbox_bo_k[un]map helper functions
[linux/fpc-iii.git] / drivers / usb / host / ehci-hub.c
blobce0eaf7d7c12a11f1fd9fb0c76d7275613669bfb
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) 2001-2004 by David Brownell
4 */
5
6 /* this file is part of ehci-hcd.c */
7
8 /*-------------------------------------------------------------------------*/
9
10 /*
11 * EHCI Root Hub ... the nonsharable stuff
12 *
13 * Registers don't need cpu_to_le32, that happens transparently
14 */
15
16 /*-------------------------------------------------------------------------*/
17 #include <linux/usb/otg.h>
18
19 #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
20
21 #ifdef CONFIG_PM
22
23 static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
24
25 static int persist_enabled_on_companion(struct usb_device *udev, void *unused)
26 {
27 return !udev->maxchild && udev->persist_enabled &&
28 udev->bus->root_hub->speed < USB_SPEED_HIGH;
29 }
30
31 /* After a power loss, ports that were owned by the companion must be
32 * reset so that the companion can still own them.
33 */
34 static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
35 {
36 u32 __iomem *reg;
37 u32 status;
38 int port;
39 __le32 buf;
40 struct usb_hcd *hcd = ehci_to_hcd(ehci);
41
42 if (!ehci->owned_ports)
43 return;
44
45 /*
46 * USB 1.1 devices are mostly HIDs, which don't need to persist across
47 * suspends. If we ensure that none of our companion's devices have
48 * persist_enabled (by looking through all USB 1.1 buses in the system),
49 * we can skip this and avoid slowing resume down. Devices without
50 * persist will just get reenumerated shortly after resume anyway.
51 */
52 if (!usb_for_each_dev(NULL, persist_enabled_on_companion))
53 return;
54
55 /* Make sure the ports are powered */
56 port = HCS_N_PORTS(ehci->hcs_params);
57 while (port--) {
58 if (test_bit(port, &ehci->owned_ports)) {
59 reg = &ehci->regs->port_status[port];
60 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
61 if (!(status & PORT_POWER))
62 ehci_port_power(ehci, port, true);
63 }
64 }
65
66 /* Give the connections some time to appear */
67 msleep(20);
68
69 spin_lock_irq(&ehci->lock);
70 port = HCS_N_PORTS(ehci->hcs_params);
71 while (port--) {
72 if (test_bit(port, &ehci->owned_ports)) {
73 reg = &ehci->regs->port_status[port];
74 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
75
76 /* Port already owned by companion? */
77 if (status & PORT_OWNER)
78 clear_bit(port, &ehci->owned_ports);
79 else if (test_bit(port, &ehci->companion_ports))
80 ehci_writel(ehci, status & ~PORT_PE, reg);
81 else {
82 spin_unlock_irq(&ehci->lock);
83 ehci_hub_control(hcd, SetPortFeature,
84 USB_PORT_FEAT_RESET, port + 1,
85 NULL, 0);
86 spin_lock_irq(&ehci->lock);
87 }
88 }
89 }
90 spin_unlock_irq(&ehci->lock);
91
92 if (!ehci->owned_ports)
93 return;
94 msleep(90); /* Wait for resets to complete */
95
96 spin_lock_irq(&ehci->lock);
97 port = HCS_N_PORTS(ehci->hcs_params);
98 while (port--) {
99 if (test_bit(port, &ehci->owned_ports)) {
100 spin_unlock_irq(&ehci->lock);
101 ehci_hub_control(hcd, GetPortStatus,
102 0, port + 1,
103 (char *) &buf, sizeof(buf));
104 spin_lock_irq(&ehci->lock);
105
106 /* The companion should now own the port,
107 * but if something went wrong the port must not
108 * remain enabled.
109 */
110 reg = &ehci->regs->port_status[port];
111 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
112 if (status & PORT_OWNER)
113 ehci_writel(ehci, status | PORT_CSC, reg);
114 else {
115 ehci_dbg(ehci, "failed handover port %d: %x\n",
116 port + 1, status);
117 ehci_writel(ehci, status & ~PORT_PE, reg);
118 }
119 }
120 }
121
122 ehci->owned_ports = 0;
123 spin_unlock_irq(&ehci->lock);
124 }
125
126 static int ehci_port_change(struct ehci_hcd *ehci)
127 {
128 int i = HCS_N_PORTS(ehci->hcs_params);
129
130 /* First check if the controller indicates a change event */
131
132 if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
133 return 1;
134
135 /*
136 * Not all controllers appear to update this while going from D3 to D0,
137 * so check the individual port status registers as well
138 */
139
140 while (i--)
141 if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
142 return 1;
143
144 return 0;
145 }
146
147 void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
148 bool suspending, bool do_wakeup)
149 {
150 int port;
151 u32 temp;
152
153 /* If remote wakeup is enabled for the root hub but disabled
154 * for the controller, we must adjust all the port wakeup flags
155 * when the controller is suspended or resumed. In all other
156 * cases they don't need to be changed.
157 */
158 if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
159 return;
160
161 spin_lock_irq(&ehci->lock);
162
163 /* clear phy low-power mode before changing wakeup flags */
164 if (ehci->has_tdi_phy_lpm) {
165 port = HCS_N_PORTS(ehci->hcs_params);
166 while (port--) {
167 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
168
169 temp = ehci_readl(ehci, hostpc_reg);
170 ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
171 }
172 spin_unlock_irq(&ehci->lock);
173 msleep(5);
174 spin_lock_irq(&ehci->lock);
175 }
176
177 port = HCS_N_PORTS(ehci->hcs_params);
178 while (port--) {
179 u32 __iomem *reg = &ehci->regs->port_status[port];
180 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
181 u32 t2 = t1 & ~PORT_WAKE_BITS;
182
183 /* If we are suspending the controller, clear the flags.
184 * If we are resuming the controller, set the wakeup flags.
185 */
186 if (!suspending) {
187 if (t1 & PORT_CONNECT)
188 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
189 else
190 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
191 }
192 ehci_writel(ehci, t2, reg);
193 }
194
195 /* enter phy low-power mode again */
196 if (ehci->has_tdi_phy_lpm) {
197 port = HCS_N_PORTS(ehci->hcs_params);
198 while (port--) {
199 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
200
201 temp = ehci_readl(ehci, hostpc_reg);
202 ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
203 }
204 }
205
206 /* Does the root hub have a port wakeup pending? */
207 if (!suspending && ehci_port_change(ehci))
208 usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
209
210 spin_unlock_irq(&ehci->lock);
211 }
212 EXPORT_SYMBOL_GPL(ehci_adjust_port_wakeup_flags);
213
214 static int ehci_bus_suspend (struct usb_hcd *hcd)
215 {
216 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
217 int port;
218 int mask;
219 int changed;
220 bool fs_idle_delay;
221
222 ehci_dbg(ehci, "suspend root hub\n");
223
224 if (time_before (jiffies, ehci->next_statechange))
225 msleep(5);
226
227 /* stop the schedules */
228 ehci_quiesce(ehci);
229
230 spin_lock_irq (&ehci->lock);
231 if (ehci->rh_state < EHCI_RH_RUNNING)
232 goto done;
233
234 /* Once the controller is stopped, port resumes that are already
235 * in progress won't complete. Hence if remote wakeup is enabled
236 * for the root hub and any ports are in the middle of a resume or
237 * remote wakeup, we must fail the suspend.
238 */
239 if (hcd->self.root_hub->do_remote_wakeup) {
240 if (ehci->resuming_ports) {
241 spin_unlock_irq(&ehci->lock);
242 ehci_dbg(ehci, "suspend failed because a port is resuming\n");
243 return -EBUSY;
244 }
245 }
246
247 /* Unlike other USB host controller types, EHCI doesn't have
248 * any notion of "global" or bus-wide suspend. The driver has
249 * to manually suspend all the active unsuspended ports, and
250 * then manually resume them in the bus_resume() routine.
251 */
252 ehci->bus_suspended = 0;
253 ehci->owned_ports = 0;
254 changed = 0;
255 fs_idle_delay = false;
256 port = HCS_N_PORTS(ehci->hcs_params);
257 while (port--) {
258 u32 __iomem *reg = &ehci->regs->port_status [port];
259 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
260 u32 t2 = t1 & ~PORT_WAKE_BITS;
261
262 /* keep track of which ports we suspend */
263 if (t1 & PORT_OWNER)
264 set_bit(port, &ehci->owned_ports);
265 else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
266 t2 |= PORT_SUSPEND;
267 set_bit(port, &ehci->bus_suspended);
268 }
269
270 /* enable remote wakeup on all ports, if told to do so */
271 if (hcd->self.root_hub->do_remote_wakeup) {
272 /* only enable appropriate wake bits, otherwise the
273 * hardware can not go phy low power mode. If a race
274 * condition happens here(connection change during bits
275 * set), the port change detection will finally fix it.
276 */
277 if (t1 & PORT_CONNECT)
278 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
279 else
280 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
281 }
282
283 if (t1 != t2) {
284 /*
285 * On some controllers, Wake-On-Disconnect will
286 * generate false wakeup signals until the bus
287 * switches over to full-speed idle. For their
288 * sake, add a delay if we need one.
289 */
290 if ((t2 & PORT_WKDISC_E) &&
291 ehci_port_speed(ehci, t2) ==
292 USB_PORT_STAT_HIGH_SPEED)
293 fs_idle_delay = true;
294 ehci_writel(ehci, t2, reg);
295 changed = 1;
296 }
297 }
298 spin_unlock_irq(&ehci->lock);
299
300 if (changed && ehci_has_fsl_susp_errata(ehci))
301 /*
302 * Wait for at least 10 millisecondes to ensure the controller
303 * enter the suspend status before initiating a port resume
304 * using the Force Port Resume bit (Not-EHCI compatible).
305 */
306 usleep_range(10000, 20000);
307
308 if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) {
309 /*
310 * Wait for HCD to enter low-power mode or for the bus
311 * to switch to full-speed idle.
312 */
313 usleep_range(5000, 5500);
314 }
315
316 if (changed && ehci->has_tdi_phy_lpm) {
317 spin_lock_irq(&ehci->lock);
318 port = HCS_N_PORTS(ehci->hcs_params);
319 while (port--) {
320 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
321 u32 t3;
322
323 t3 = ehci_readl(ehci, hostpc_reg);
324 ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
325 t3 = ehci_readl(ehci, hostpc_reg);
326 ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
327 port, (t3 & HOSTPC_PHCD) ?
328 "succeeded" : "failed");
329 }
330 spin_unlock_irq(&ehci->lock);
331 }
332
333 /* Apparently some devices need a >= 1-uframe delay here */
334 if (ehci->bus_suspended)
335 udelay(150);
336
337 /* turn off now-idle HC */
338 ehci_halt (ehci);
339
340 spin_lock_irq(&ehci->lock);
341 if (ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_POLL_DEAD))
342 ehci_handle_controller_death(ehci);
343 if (ehci->rh_state != EHCI_RH_RUNNING)
344 goto done;
345 ehci->rh_state = EHCI_RH_SUSPENDED;
346
347 unlink_empty_async_suspended(ehci);
348
349 /* Any IAA cycle that started before the suspend is now invalid */
350 end_iaa_cycle(ehci);
351 ehci_handle_start_intr_unlinks(ehci);
352 ehci_handle_intr_unlinks(ehci);
353 end_free_itds(ehci);
354
355 /* allow remote wakeup */
356 mask = INTR_MASK;
357 if (!hcd->self.root_hub->do_remote_wakeup)
358 mask &= ~STS_PCD;
359 ehci_writel(ehci, mask, &ehci->regs->intr_enable);
360 ehci_readl(ehci, &ehci->regs->intr_enable);
361
362 done:
363 ehci->next_statechange = jiffies + msecs_to_jiffies(10);
364 ehci->enabled_hrtimer_events = 0;
365 ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
366 spin_unlock_irq (&ehci->lock);
367
368 hrtimer_cancel(&ehci->hrtimer);
369 return 0;
370 }
371
372
373 /* caller has locked the root hub, and should reset/reinit on error */
374 static int ehci_bus_resume (struct usb_hcd *hcd)
375 {
376 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
377 u32 temp;
378 u32 power_okay;
379 int i;
380 unsigned long resume_needed = 0;
381
382 if (time_before (jiffies, ehci->next_statechange))
383 msleep(5);
384 spin_lock_irq (&ehci->lock);
385 if (!HCD_HW_ACCESSIBLE(hcd) || ehci->shutdown)
386 goto shutdown;
387
388 if (unlikely(ehci->debug)) {
389 if (!dbgp_reset_prep(hcd))
390 ehci->debug = NULL;
391 else
392 dbgp_external_startup(hcd);
393 }
394
395 /* Ideally and we've got a real resume here, and no port's power
396 * was lost. (For PCI, that means Vaux was maintained.) But we
397 * could instead be restoring a swsusp snapshot -- so that BIOS was
398 * the last user of the controller, not reset/pm hardware keeping
399 * state we gave to it.
400 */
401 power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
402 ehci_dbg(ehci, "resume root hub%s\n",
403 power_okay ? "" : " after power loss");
404
405 /* at least some APM implementations will try to deliver
406 * IRQs right away, so delay them until we're ready.
407 */
408 ehci_writel(ehci, 0, &ehci->regs->intr_enable);
409
410 /* re-init operational registers */
411 ehci_writel(ehci, 0, &ehci->regs->segment);
412 ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
413 ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
414
415 /* restore CMD_RUN, framelist size, and irq threshold */
416 ehci->command |= CMD_RUN;
417 ehci_writel(ehci, ehci->command, &ehci->regs->command);
418 ehci->rh_state = EHCI_RH_RUNNING;
419
420 /*
421 * According to Bugzilla #8190, the port status for some controllers
422 * will be wrong without a delay. At their wrong status, the port
423 * is enabled, but not suspended neither resumed.
424 */
425 i = HCS_N_PORTS(ehci->hcs_params);
426 while (i--) {
427 temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
428 if ((temp & PORT_PE) &&
429 !(temp & (PORT_SUSPEND | PORT_RESUME))) {
430 ehci_dbg(ehci, "Port status(0x%x) is wrong\n", temp);
431 spin_unlock_irq(&ehci->lock);
432 msleep(8);
433 spin_lock_irq(&ehci->lock);
434 break;
435 }
436 }
437
438 if (ehci->shutdown)
439 goto shutdown;
440
441 /* clear phy low-power mode before resume */
442 if (ehci->bus_suspended && ehci->has_tdi_phy_lpm) {
443 i = HCS_N_PORTS(ehci->hcs_params);
444 while (i--) {
445 if (test_bit(i, &ehci->bus_suspended)) {
446 u32 __iomem *hostpc_reg =
447 &ehci->regs->hostpc[i];
448
449 temp = ehci_readl(ehci, hostpc_reg);
450 ehci_writel(ehci, temp & ~HOSTPC_PHCD,
451 hostpc_reg);
452 }
453 }
454 spin_unlock_irq(&ehci->lock);
455 msleep(5);
456 spin_lock_irq(&ehci->lock);
457 if (ehci->shutdown)
458 goto shutdown;
459 }
460
461 /* manually resume the ports we suspended during bus_suspend() */
462 i = HCS_N_PORTS (ehci->hcs_params);
463 while (i--) {
464 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
465 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
466 if (test_bit(i, &ehci->bus_suspended) &&
467 (temp & PORT_SUSPEND)) {
468 temp |= PORT_RESUME;
469 set_bit(i, &resume_needed);
470 }
471 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
472 }
473
474 /*
475 * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume
476 * port
477 */
478 if (resume_needed) {
479 spin_unlock_irq(&ehci->lock);
480 msleep(USB_RESUME_TIMEOUT);
481 spin_lock_irq(&ehci->lock);
482 if (ehci->shutdown)
483 goto shutdown;
484 }
485
486 i = HCS_N_PORTS (ehci->hcs_params);
487 while (i--) {
488 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
489 if (test_bit(i, &resume_needed)) {
490 temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
491 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
492 }
493 }
494
495 ehci->next_statechange = jiffies + msecs_to_jiffies(5);
496 spin_unlock_irq(&ehci->lock);
497
498 ehci_handover_companion_ports(ehci);
499
500 /* Now we can safely re-enable irqs */
501 spin_lock_irq(&ehci->lock);
502 if (ehci->shutdown)
503 goto shutdown;
504 ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
505 (void) ehci_readl(ehci, &ehci->regs->intr_enable);
506 spin_unlock_irq(&ehci->lock);
507
508 return 0;
509
510 shutdown:
511 spin_unlock_irq(&ehci->lock);
512 return -ESHUTDOWN;
513 }
514
515 static unsigned long ehci_get_resuming_ports(struct usb_hcd *hcd)
516 {
517 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
518
519 return ehci->resuming_ports;
520 }
521
522 #else
523
524 #define ehci_bus_suspend NULL
525 #define ehci_bus_resume NULL
526 #define ehci_get_resuming_ports NULL
527
528 #endif /* CONFIG_PM */
529
530 /*-------------------------------------------------------------------------*/
531
532 /*
533 * Sets the owner of a port
534 */
535 static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
536 {
537 u32 __iomem *status_reg;
538 u32 port_status;
539 int try;
540
541 status_reg = &ehci->regs->port_status[portnum];
542
543 /*
544 * The controller won't set the OWNER bit if the port is
545 * enabled, so this loop will sometimes require at least two
546 * iterations: one to disable the port and one to set OWNER.
547 */
548 for (try = 4; try > 0; --try) {
549 spin_lock_irq(&ehci->lock);
550 port_status = ehci_readl(ehci, status_reg);
551 if ((port_status & PORT_OWNER) == new_owner
552 || (port_status & (PORT_OWNER | PORT_CONNECT))
553 == 0)
554 try = 0;
555 else {
556 port_status ^= PORT_OWNER;
557 port_status &= ~(PORT_PE | PORT_RWC_BITS);
558 ehci_writel(ehci, port_status, status_reg);
559 }
560 spin_unlock_irq(&ehci->lock);
561 if (try > 1)
562 msleep(5);
563 }
564 }
565
566 /*-------------------------------------------------------------------------*/
567
568 static int check_reset_complete (
569 struct ehci_hcd *ehci,
570 int index,
571 u32 __iomem *status_reg,
572 int port_status
573 ) {
574 if (!(port_status & PORT_CONNECT))
575 return port_status;
576
577 /* if reset finished and it's still not enabled -- handoff */
578 if (!(port_status & PORT_PE)) {
579
580 /* with integrated TT, there's nobody to hand it to! */
581 if (ehci_is_TDI(ehci)) {
582 ehci_dbg (ehci,
583 "Failed to enable port %d on root hub TT\n",
584 index+1);
585 return port_status;
586 }
587
588 ehci_dbg (ehci, "port %d full speed --> companion\n",
589 index + 1);
590
591 // what happens if HCS_N_CC(params) == 0 ?
592 port_status |= PORT_OWNER;
593 port_status &= ~PORT_RWC_BITS;
594 ehci_writel(ehci, port_status, status_reg);
595
596 /* ensure 440EPX ohci controller state is operational */
597 if (ehci->has_amcc_usb23)
598 set_ohci_hcfs(ehci, 1);
599 } else {
600 ehci_dbg(ehci, "port %d reset complete, port enabled\n",
601 index + 1);
602 /* ensure 440EPx ohci controller state is suspended */
603 if (ehci->has_amcc_usb23)
604 set_ohci_hcfs(ehci, 0);
605 }
606
607 return port_status;
608 }
609
610 /*-------------------------------------------------------------------------*/
611
612
613 /* build "status change" packet (one or two bytes) from HC registers */
614
615 static int
616 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
617 {
618 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
619 u32 temp, status;
620 u32 mask;
621 int ports, i, retval = 1;
622 unsigned long flags;
623 u32 ppcd = ~0;
624
625 /* init status to no-changes */
626 buf [0] = 0;
627 ports = HCS_N_PORTS (ehci->hcs_params);
628 if (ports > 7) {
629 buf [1] = 0;
630 retval++;
631 }
632
633 /* Inform the core about resumes-in-progress by returning
634 * a non-zero value even if there are no status changes.
635 */
636 status = ehci->resuming_ports;
637
638 /* Some boards (mostly VIA?) report bogus overcurrent indications,
639 * causing massive log spam unless we completely ignore them. It
640 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
641 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
642 * PORT_POWER; that's surprising, but maybe within-spec.
643 */
644 if (!ignore_oc)
645 mask = PORT_CSC | PORT_PEC | PORT_OCC;
646 else
647 mask = PORT_CSC | PORT_PEC;
648 // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
649
650 /* no hub change reports (bit 0) for now (power, ...) */
651
652 /* port N changes (bit N)? */
653 spin_lock_irqsave (&ehci->lock, flags);
654
655 /* get per-port change detect bits */
656 if (ehci->has_ppcd)
657 ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
658
659 for (i = 0; i < ports; i++) {
660 /* leverage per-port change bits feature */
661 if (ppcd & (1 << i))
662 temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
663 else
664 temp = 0;
665
666 /*
667 * Return status information even for ports with OWNER set.
668 * Otherwise hub_wq wouldn't see the disconnect event when a
669 * high-speed device is switched over to the companion
670 * controller by the user.
671 */
672
673 if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
674 || (ehci->reset_done[i] && time_after_eq(
675 jiffies, ehci->reset_done[i]))) {
676 if (i < 7)
677 buf [0] |= 1 << (i + 1);
678 else
679 buf [1] |= 1 << (i - 7);
680 status = STS_PCD;
681 }
682 }
683
684 /* If a resume is in progress, make sure it can finish */
685 if (ehci->resuming_ports)
686 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(25));
687
688 spin_unlock_irqrestore (&ehci->lock, flags);
689 return status ? retval : 0;
690 }
691
692 /*-------------------------------------------------------------------------*/
693
694 static void
695 ehci_hub_descriptor (
696 struct ehci_hcd *ehci,
697 struct usb_hub_descriptor *desc
698 ) {
699 int ports = HCS_N_PORTS (ehci->hcs_params);
700 u16 temp;
701
702 desc->bDescriptorType = USB_DT_HUB;
703 desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */
704 desc->bHubContrCurrent = 0;
705
706 desc->bNbrPorts = ports;
707 temp = 1 + (ports / 8);
708 desc->bDescLength = 7 + 2 * temp;
709
710 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
711 memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
712 memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
713
714 temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */
715 if (HCS_PPC (ehci->hcs_params))
716 temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */
717 else
718 temp |= HUB_CHAR_NO_LPSM; /* no power switching */
719 #if 0
720 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
721 if (HCS_INDICATOR (ehci->hcs_params))
722 temp |= HUB_CHAR_PORTIND; /* per-port indicators (LEDs) */
723 #endif
724 desc->wHubCharacteristics = cpu_to_le16(temp);
725 }
726
727 /*-------------------------------------------------------------------------*/
728 #ifdef CONFIG_USB_HCD_TEST_MODE
729
730 #define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06
731
732 static void usb_ehset_completion(struct urb *urb)
733 {
734 struct completion *done = urb->context;
735
736 complete(done);
737 }
738 static int submit_single_step_set_feature(
739 struct usb_hcd *hcd,
740 struct urb *urb,
741 int is_setup
742 );
743
744 /*
745 * Allocate and initialize a control URB. This request will be used by the
746 * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
747 * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
748 * Return NULL if failed.
749 */
750 static struct urb *request_single_step_set_feature_urb(
751 struct usb_device *udev,
752 void *dr,
753 void *buf,
754 struct completion *done
755 ) {
756 struct urb *urb;
757 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
758 struct usb_host_endpoint *ep;
759
760 urb = usb_alloc_urb(0, GFP_KERNEL);
761 if (!urb)
762 return NULL;
763
764 urb->pipe = usb_rcvctrlpipe(udev, 0);
765 ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
766 [usb_pipeendpoint(urb->pipe)];
767 if (!ep) {
768 usb_free_urb(urb);
769 return NULL;
770 }
771
772 urb->ep = ep;
773 urb->dev = udev;
774 urb->setup_packet = (void *)dr;
775 urb->transfer_buffer = buf;
776 urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
777 urb->complete = usb_ehset_completion;
778 urb->status = -EINPROGRESS;
779 urb->actual_length = 0;
780 urb->transfer_flags = URB_DIR_IN;
781 usb_get_urb(urb);
782 atomic_inc(&urb->use_count);
783 atomic_inc(&urb->dev->urbnum);
784 urb->setup_dma = dma_map_single(
785 hcd->self.sysdev,
786 urb->setup_packet,
787 sizeof(struct usb_ctrlrequest),
788 DMA_TO_DEVICE);
789 urb->transfer_dma = dma_map_single(
790 hcd->self.sysdev,
791 urb->transfer_buffer,
792 urb->transfer_buffer_length,
793 DMA_FROM_DEVICE);
794 urb->context = done;
795 return urb;
796 }
797
798 static int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
799 {
800 int retval = -ENOMEM;
801 struct usb_ctrlrequest *dr;
802 struct urb *urb;
803 struct usb_device *udev;
804 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
805 struct usb_device_descriptor *buf;
806 DECLARE_COMPLETION_ONSTACK(done);
807
808 /* Obtain udev of the rhub's child port */
809 udev = usb_hub_find_child(hcd->self.root_hub, port);
810 if (!udev) {
811 ehci_err(ehci, "No device attached to the RootHub\n");
812 return -ENODEV;
813 }
814 buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
815 if (!buf)
816 return -ENOMEM;
817
818 dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
819 if (!dr) {
820 kfree(buf);
821 return -ENOMEM;
822 }
823
824 /* Fill Setup packet for GetDescriptor */
825 dr->bRequestType = USB_DIR_IN;
826 dr->bRequest = USB_REQ_GET_DESCRIPTOR;
827 dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
828 dr->wIndex = 0;
829 dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
830 urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
831 if (!urb)
832 goto cleanup;
833
834 /* Submit just the SETUP stage */
835 retval = submit_single_step_set_feature(hcd, urb, 1);
836 if (retval)
837 goto out1;
838 if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
839 usb_kill_urb(urb);
840 retval = -ETIMEDOUT;
841 ehci_err(ehci, "%s SETUP stage timed out on ep0\n", __func__);
842 goto out1;
843 }
844 msleep(15 * 1000);
845
846 /* Complete remaining DATA and STATUS stages using the same URB */
847 urb->status = -EINPROGRESS;
848 usb_get_urb(urb);
849 atomic_inc(&urb->use_count);
850 atomic_inc(&urb->dev->urbnum);
851 retval = submit_single_step_set_feature(hcd, urb, 0);
852 if (!retval && !wait_for_completion_timeout(&done,
853 msecs_to_jiffies(2000))) {
854 usb_kill_urb(urb);
855 retval = -ETIMEDOUT;
856 ehci_err(ehci, "%s IN stage timed out on ep0\n", __func__);
857 }
858 out1:
859 usb_free_urb(urb);
860 cleanup:
861 kfree(dr);
862 kfree(buf);
863 return retval;
864 }
865 #endif /* CONFIG_USB_HCD_TEST_MODE */
866 /*-------------------------------------------------------------------------*/
867
868 int ehci_hub_control(
869 struct usb_hcd *hcd,
870 u16 typeReq,
871 u16 wValue,
872 u16 wIndex,
873 char *buf,
874 u16 wLength
875 ) {
876 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
877 int ports = HCS_N_PORTS (ehci->hcs_params);
878 u32 __iomem *status_reg, *hostpc_reg;
879 u32 temp, temp1, status;
880 unsigned long flags;
881 int retval = 0;
882 unsigned selector;
883
884 /*
885 * Avoid underflow while calculating (wIndex & 0xff) - 1.
886 * The compiler might deduce that wIndex can never be 0 and then
887 * optimize away the tests for !wIndex below.
888 */
889 temp = wIndex & 0xff;
890 temp -= (temp > 0);
891 status_reg = &ehci->regs->port_status[temp];
892 hostpc_reg = &ehci->regs->hostpc[temp];
893
894 /*
895 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
896 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
897 * (track current state ourselves) ... blink for diagnostics,
898 * power, "this is the one", etc. EHCI spec supports this.
899 */
900
901 spin_lock_irqsave (&ehci->lock, flags);
902 switch (typeReq) {
903 case ClearHubFeature:
904 switch (wValue) {
905 case C_HUB_LOCAL_POWER:
906 case C_HUB_OVER_CURRENT:
907 /* no hub-wide feature/status flags */
908 break;
909 default:
910 goto error;
911 }
912 break;
913 case ClearPortFeature:
914 if (!wIndex || wIndex > ports)
915 goto error;
916 wIndex--;
917 temp = ehci_readl(ehci, status_reg);
918 temp &= ~PORT_RWC_BITS;
919
920 /*
921 * Even if OWNER is set, so the port is owned by the
922 * companion controller, hub_wq needs to be able to clear
923 * the port-change status bits (especially
924 * USB_PORT_STAT_C_CONNECTION).
925 */
926
927 switch (wValue) {
928 case USB_PORT_FEAT_ENABLE:
929 ehci_writel(ehci, temp & ~PORT_PE, status_reg);
930 break;
931 case USB_PORT_FEAT_C_ENABLE:
932 ehci_writel(ehci, temp | PORT_PEC, status_reg);
933 break;
934 case USB_PORT_FEAT_SUSPEND:
935 if (temp & PORT_RESET)
936 goto error;
937 if (ehci->no_selective_suspend)
938 break;
939 #ifdef CONFIG_USB_OTG
940 if ((hcd->self.otg_port == (wIndex + 1))
941 && hcd->self.b_hnp_enable) {
942 otg_start_hnp(hcd->usb_phy->otg);
943 break;
944 }
945 #endif
946 if (!(temp & PORT_SUSPEND))
947 break;
948 if ((temp & PORT_PE) == 0)
949 goto error;
950
951 /* clear phy low-power mode before resume */
952 if (ehci->has_tdi_phy_lpm) {
953 temp1 = ehci_readl(ehci, hostpc_reg);
954 ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
955 hostpc_reg);
956 spin_unlock_irqrestore(&ehci->lock, flags);
957 msleep(5);/* wait to leave low-power mode */
958 spin_lock_irqsave(&ehci->lock, flags);
959 }
960 /* resume signaling for 20 msec */
961 temp &= ~PORT_WAKE_BITS;
962 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
963 ehci->reset_done[wIndex] = jiffies
964 + msecs_to_jiffies(USB_RESUME_TIMEOUT);
965 set_bit(wIndex, &ehci->resuming_ports);
966 usb_hcd_start_port_resume(&hcd->self, wIndex);
967 break;
968 case USB_PORT_FEAT_C_SUSPEND:
969 clear_bit(wIndex, &ehci->port_c_suspend);
970 break;
971 case USB_PORT_FEAT_POWER:
972 if (HCS_PPC(ehci->hcs_params)) {
973 spin_unlock_irqrestore(&ehci->lock, flags);
974 ehci_port_power(ehci, wIndex, false);
975 spin_lock_irqsave(&ehci->lock, flags);
976 }
977 break;
978 case USB_PORT_FEAT_C_CONNECTION:
979 ehci_writel(ehci, temp | PORT_CSC, status_reg);
980 break;
981 case USB_PORT_FEAT_C_OVER_CURRENT:
982 ehci_writel(ehci, temp | PORT_OCC, status_reg);
983 break;
984 case USB_PORT_FEAT_C_RESET:
985 /* GetPortStatus clears reset */
986 break;
987 default:
988 goto error;
989 }
990 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
991 break;
992 case GetHubDescriptor:
993 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
994 buf);
995 break;
996 case GetHubStatus:
997 /* no hub-wide feature/status flags */
998 memset (buf, 0, 4);
999 //cpu_to_le32s ((u32 *) buf);
1000 break;
1001 case GetPortStatus:
1002 if (!wIndex || wIndex > ports)
1003 goto error;
1004 wIndex--;
1005 status = 0;
1006 temp = ehci_readl(ehci, status_reg);
1007
1008 // wPortChange bits
1009 if (temp & PORT_CSC)
1010 status |= USB_PORT_STAT_C_CONNECTION << 16;
1011 if (temp & PORT_PEC)
1012 status |= USB_PORT_STAT_C_ENABLE << 16;
1013
1014 if ((temp & PORT_OCC) && !ignore_oc){
1015 status |= USB_PORT_STAT_C_OVERCURRENT << 16;
1016
1017 /*
1018 * Hubs should disable port power on over-current.
1019 * However, not all EHCI implementations do this
1020 * automatically, even if they _do_ support per-port
1021 * power switching; they're allowed to just limit the
1022 * current. hub_wq will turn the power back on.
1023 */
1024 if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle))
1025 && HCS_PPC(ehci->hcs_params)) {
1026 spin_unlock_irqrestore(&ehci->lock, flags);
1027 ehci_port_power(ehci, wIndex, false);
1028 spin_lock_irqsave(&ehci->lock, flags);
1029 temp = ehci_readl(ehci, status_reg);
1030 }
1031 }
1032
1033 /* no reset or resume pending */
1034 if (!ehci->reset_done[wIndex]) {
1035
1036 /* Remote Wakeup received? */
1037 if (temp & PORT_RESUME) {
1038 /* resume signaling for 20 msec */
1039 ehci->reset_done[wIndex] = jiffies
1040 + msecs_to_jiffies(20);
1041 usb_hcd_start_port_resume(&hcd->self, wIndex);
1042 set_bit(wIndex, &ehci->resuming_ports);
1043 /* check the port again */
1044 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
1045 ehci->reset_done[wIndex]);
1046 }
1047
1048 /* reset or resume not yet complete */
1049 } else if (!time_after_eq(jiffies, ehci->reset_done[wIndex])) {
1050 ; /* wait until it is complete */
1051
1052 /* resume completed */
1053 } else if (test_bit(wIndex, &ehci->resuming_ports)) {
1054 clear_bit(wIndex, &ehci->suspended_ports);
1055 set_bit(wIndex, &ehci->port_c_suspend);
1056 ehci->reset_done[wIndex] = 0;
1057 usb_hcd_end_port_resume(&hcd->self, wIndex);
1058
1059 /* stop resume signaling */
1060 temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
1061 ehci_writel(ehci, temp, status_reg);
1062 clear_bit(wIndex, &ehci->resuming_ports);
1063 retval = ehci_handshake(ehci, status_reg,
1064 PORT_RESUME, 0, 2000 /* 2msec */);
1065 if (retval != 0) {
1066 ehci_err(ehci, "port %d resume error %d\n",
1067 wIndex + 1, retval);
1068 goto error;
1069 }
1070 temp = ehci_readl(ehci, status_reg);
1071
1072 /* whoever resets must GetPortStatus to complete it!! */
1073 } else {
1074 status |= USB_PORT_STAT_C_RESET << 16;
1075 ehci->reset_done [wIndex] = 0;
1076
1077 /* force reset to complete */
1078 ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
1079 status_reg);
1080 /* REVISIT: some hardware needs 550+ usec to clear
1081 * this bit; seems too long to spin routinely...
1082 */
1083 retval = ehci_handshake(ehci, status_reg,
1084 PORT_RESET, 0, 1000);
1085 if (retval != 0) {
1086 ehci_err (ehci, "port %d reset error %d\n",
1087 wIndex + 1, retval);
1088 goto error;
1089 }
1090
1091 /* see what we found out */
1092 temp = check_reset_complete (ehci, wIndex, status_reg,
1093 ehci_readl(ehci, status_reg));
1094 }
1095
1096 /* transfer dedicated ports to the companion hc */
1097 if ((temp & PORT_CONNECT) &&
1098 test_bit(wIndex, &ehci->companion_ports)) {
1099 temp &= ~PORT_RWC_BITS;
1100 temp |= PORT_OWNER;
1101 ehci_writel(ehci, temp, status_reg);
1102 ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
1103 temp = ehci_readl(ehci, status_reg);
1104 }
1105
1106 /*
1107 * Even if OWNER is set, there's no harm letting hub_wq
1108 * see the wPortStatus values (they should all be 0 except
1109 * for PORT_POWER anyway).
1110 */
1111
1112 if (temp & PORT_CONNECT) {
1113 status |= USB_PORT_STAT_CONNECTION;
1114 // status may be from integrated TT
1115 if (ehci->has_hostpc) {
1116 temp1 = ehci_readl(ehci, hostpc_reg);
1117 status |= ehci_port_speed(ehci, temp1);
1118 } else
1119 status |= ehci_port_speed(ehci, temp);
1120 }
1121 if (temp & PORT_PE)
1122 status |= USB_PORT_STAT_ENABLE;
1123
1124 /* maybe the port was unsuspended without our knowledge */
1125 if (temp & (PORT_SUSPEND|PORT_RESUME)) {
1126 status |= USB_PORT_STAT_SUSPEND;
1127 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
1128 clear_bit(wIndex, &ehci->suspended_ports);
1129 clear_bit(wIndex, &ehci->resuming_ports);
1130 ehci->reset_done[wIndex] = 0;
1131 if (temp & PORT_PE)
1132 set_bit(wIndex, &ehci->port_c_suspend);
1133 usb_hcd_end_port_resume(&hcd->self, wIndex);
1134 }
1135
1136 if (temp & PORT_OC)
1137 status |= USB_PORT_STAT_OVERCURRENT;
1138 if (temp & PORT_RESET)
1139 status |= USB_PORT_STAT_RESET;
1140 if (temp & PORT_POWER)
1141 status |= USB_PORT_STAT_POWER;
1142 if (test_bit(wIndex, &ehci->port_c_suspend))
1143 status |= USB_PORT_STAT_C_SUSPEND << 16;
1144
1145 if (status & ~0xffff) /* only if wPortChange is interesting */
1146 dbg_port(ehci, "GetStatus", wIndex + 1, temp);
1147 put_unaligned_le32(status, buf);
1148 break;
1149 case SetHubFeature:
1150 switch (wValue) {
1151 case C_HUB_LOCAL_POWER:
1152 case C_HUB_OVER_CURRENT:
1153 /* no hub-wide feature/status flags */
1154 break;
1155 default:
1156 goto error;
1157 }
1158 break;
1159 case SetPortFeature:
1160 selector = wIndex >> 8;
1161 wIndex &= 0xff;
1162 if (unlikely(ehci->debug)) {
1163 /* If the debug port is active any port
1164 * feature requests should get denied */
1165 if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
1166 (readl(&ehci->debug->control) & DBGP_ENABLED)) {
1167 retval = -ENODEV;
1168 goto error_exit;
1169 }
1170 }
1171 if (!wIndex || wIndex > ports)
1172 goto error;
1173 wIndex--;
1174 temp = ehci_readl(ehci, status_reg);
1175 if (temp & PORT_OWNER)
1176 break;
1177
1178 temp &= ~PORT_RWC_BITS;
1179 switch (wValue) {
1180 case USB_PORT_FEAT_SUSPEND:
1181 if (ehci->no_selective_suspend)
1182 break;
1183 if ((temp & PORT_PE) == 0
1184 || (temp & PORT_RESET) != 0)
1185 goto error;
1186
1187 /* After above check the port must be connected.
1188 * Set appropriate bit thus could put phy into low power
1189 * mode if we have tdi_phy_lpm feature
1190 */
1191 temp &= ~PORT_WKCONN_E;
1192 temp |= PORT_WKDISC_E | PORT_WKOC_E;
1193 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
1194 if (ehci->has_tdi_phy_lpm) {
1195 spin_unlock_irqrestore(&ehci->lock, flags);
1196 msleep(5);/* 5ms for HCD enter low pwr mode */
1197 spin_lock_irqsave(&ehci->lock, flags);
1198 temp1 = ehci_readl(ehci, hostpc_reg);
1199 ehci_writel(ehci, temp1 | HOSTPC_PHCD,
1200 hostpc_reg);
1201 temp1 = ehci_readl(ehci, hostpc_reg);
1202 ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
1203 wIndex, (temp1 & HOSTPC_PHCD) ?
1204 "succeeded" : "failed");
1205 }
1206 if (ehci_has_fsl_susp_errata(ehci)) {
1207 /* 10ms for HCD enter suspend */
1208 spin_unlock_irqrestore(&ehci->lock, flags);
1209 usleep_range(10000, 20000);
1210 spin_lock_irqsave(&ehci->lock, flags);
1211 }
1212 set_bit(wIndex, &ehci->suspended_ports);
1213 break;
1214 case USB_PORT_FEAT_POWER:
1215 if (HCS_PPC(ehci->hcs_params)) {
1216 spin_unlock_irqrestore(&ehci->lock, flags);
1217 ehci_port_power(ehci, wIndex, true);
1218 spin_lock_irqsave(&ehci->lock, flags);
1219 }
1220 break;
1221 case USB_PORT_FEAT_RESET:
1222 if (temp & (PORT_SUSPEND|PORT_RESUME))
1223 goto error;
1224 /* line status bits may report this as low speed,
1225 * which can be fine if this root hub has a
1226 * transaction translator built in.
1227 */
1228 if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
1229 && !ehci_is_TDI(ehci)
1230 && PORT_USB11 (temp)) {
1231 ehci_dbg (ehci,
1232 "port %d low speed --> companion\n",
1233 wIndex + 1);
1234 temp |= PORT_OWNER;
1235 } else {
1236 temp |= PORT_RESET;
1237 temp &= ~PORT_PE;
1238
1239 /*
1240 * caller must wait, then call GetPortStatus
1241 * usb 2.0 spec says 50 ms resets on root
1242 */
1243 ehci->reset_done [wIndex] = jiffies
1244 + msecs_to_jiffies (50);
1245
1246 /*
1247 * Force full-speed connect for FSL high-speed
1248 * erratum; disable HS Chirp by setting PFSC bit
1249 */
1250 if (ehci_has_fsl_hs_errata(ehci))
1251 temp |= (1 << PORTSC_FSL_PFSC);
1252 }
1253 ehci_writel(ehci, temp, status_reg);
1254 break;
1255
1256 /* For downstream facing ports (these): one hub port is put
1257 * into test mode according to USB2 11.24.2.13, then the hub
1258 * must be reset (which for root hub now means rmmod+modprobe,
1259 * or else system reboot). See EHCI 2.3.9 and 4.14 for info
1260 * about the EHCI-specific stuff.
1261 */
1262 case USB_PORT_FEAT_TEST:
1263 #ifdef CONFIG_USB_HCD_TEST_MODE
1264 if (selector == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
1265 spin_unlock_irqrestore(&ehci->lock, flags);
1266 retval = ehset_single_step_set_feature(hcd,
1267 wIndex + 1);
1268 spin_lock_irqsave(&ehci->lock, flags);
1269 break;
1270 }
1271 #endif
1272 if (!selector || selector > 5)
1273 goto error;
1274 spin_unlock_irqrestore(&ehci->lock, flags);
1275 ehci_quiesce(ehci);
1276 spin_lock_irqsave(&ehci->lock, flags);
1277
1278 /* Put all enabled ports into suspend */
1279 while (ports--) {
1280 u32 __iomem *sreg =
1281 &ehci->regs->port_status[ports];
1282
1283 temp = ehci_readl(ehci, sreg) & ~PORT_RWC_BITS;
1284 if (temp & PORT_PE)
1285 ehci_writel(ehci, temp | PORT_SUSPEND,
1286 sreg);
1287 }
1288
1289 spin_unlock_irqrestore(&ehci->lock, flags);
1290 ehci_halt(ehci);
1291 spin_lock_irqsave(&ehci->lock, flags);
1292
1293 temp = ehci_readl(ehci, status_reg);
1294 temp |= selector << 16;
1295 ehci_writel(ehci, temp, status_reg);
1296 break;
1297
1298 default:
1299 goto error;
1300 }
1301 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
1302 break;
1303
1304 default:
1305 error:
1306 /* "stall" on error */
1307 retval = -EPIPE;
1308 }
1309 error_exit:
1310 spin_unlock_irqrestore (&ehci->lock, flags);
1311 return retval;
1312 }
1313 EXPORT_SYMBOL_GPL(ehci_hub_control);
1314
1315 static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
1316 {
1317 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1318
1319 if (ehci_is_TDI(ehci))
1320 return;
1321 set_owner(ehci, --portnum, PORT_OWNER);
1322 }
1323
1324 static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
1325 {
1326 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1327 u32 __iomem *reg;
1328
1329 if (ehci_is_TDI(ehci))
1330 return 0;
1331 reg = &ehci->regs->port_status[portnum - 1];
1332 return ehci_readl(ehci, reg) & PORT_OWNER;
1333 }
1334
1335 static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable)
1336 {
1337 struct usb_hcd *hcd = ehci_to_hcd(ehci);
1338 u32 __iomem *status_reg = &ehci->regs->port_status[portnum];
1339 u32 temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
1340
1341 if (enable)
1342 ehci_writel(ehci, temp | PORT_POWER, status_reg);
1343 else
1344 ehci_writel(ehci, temp & ~PORT_POWER, status_reg);
1345
1346 if (hcd->driver->port_power)
1347 hcd->driver->port_power(hcd, portnum, enable);
1348
1349 return 0;
1350 }
Linux with added FPC-III support