2 * LG.Philips LB035Q02 LCD Panel driver
4 * Copyright (C) 2013 Texas Instruments
5 * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
6 * Based on a driver by: Steve Sakoman <steve@sakoman.com>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published by
10 * the Free Software Foundation.
13 #include <linux/module.h>
14 #include <linux/delay.h>
15 #include <linux/spi/spi.h>
16 #include <linux/mutex.h>
17 #include <linux/gpio.h>
18 #include <linux/gpio/consumer.h>
20 #include "../dss/omapdss.h"
22 static struct omap_video_timings lb035q02_timings
= {
26 .pixelclock
= 6500000,
36 .vsync_level
= OMAPDSS_SIG_ACTIVE_LOW
,
37 .hsync_level
= OMAPDSS_SIG_ACTIVE_LOW
,
38 .data_pclk_edge
= OMAPDSS_DRIVE_SIG_RISING_EDGE
,
39 .de_level
= OMAPDSS_SIG_ACTIVE_HIGH
,
40 .sync_pclk_edge
= OMAPDSS_DRIVE_SIG_FALLING_EDGE
,
43 struct panel_drv_data
{
44 struct omap_dss_device dssdev
;
45 struct omap_dss_device
*in
;
47 struct spi_device
*spi
;
51 struct omap_video_timings videomode
;
53 struct gpio_desc
*enable_gpio
;
56 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
58 static int lb035q02_write_reg(struct spi_device
*spi
, u8 reg
, u16 val
)
60 struct spi_message msg
;
61 struct spi_transfer index_xfer
= {
65 struct spi_transfer value_xfer
= {
70 spi_message_init(&msg
);
75 buffer
[2] = reg
& 0x7f;
76 index_xfer
.tx_buf
= buffer
;
77 spi_message_add_tail(&index_xfer
, &msg
);
83 value_xfer
.tx_buf
= buffer
+ 4;
84 spi_message_add_tail(&value_xfer
, &msg
);
86 return spi_sync(spi
, &msg
);
89 static void init_lb035q02_panel(struct spi_device
*spi
)
91 /* Init sequence from page 28 of the lb035q02 spec */
92 lb035q02_write_reg(spi
, 0x01, 0x6300);
93 lb035q02_write_reg(spi
, 0x02, 0x0200);
94 lb035q02_write_reg(spi
, 0x03, 0x0177);
95 lb035q02_write_reg(spi
, 0x04, 0x04c7);
96 lb035q02_write_reg(spi
, 0x05, 0xffc0);
97 lb035q02_write_reg(spi
, 0x06, 0xe806);
98 lb035q02_write_reg(spi
, 0x0a, 0x4008);
99 lb035q02_write_reg(spi
, 0x0b, 0x0000);
100 lb035q02_write_reg(spi
, 0x0d, 0x0030);
101 lb035q02_write_reg(spi
, 0x0e, 0x2800);
102 lb035q02_write_reg(spi
, 0x0f, 0x0000);
103 lb035q02_write_reg(spi
, 0x16, 0x9f80);
104 lb035q02_write_reg(spi
, 0x17, 0x0a0f);
105 lb035q02_write_reg(spi
, 0x1e, 0x00c1);
106 lb035q02_write_reg(spi
, 0x30, 0x0300);
107 lb035q02_write_reg(spi
, 0x31, 0x0007);
108 lb035q02_write_reg(spi
, 0x32, 0x0000);
109 lb035q02_write_reg(spi
, 0x33, 0x0000);
110 lb035q02_write_reg(spi
, 0x34, 0x0707);
111 lb035q02_write_reg(spi
, 0x35, 0x0004);
112 lb035q02_write_reg(spi
, 0x36, 0x0302);
113 lb035q02_write_reg(spi
, 0x37, 0x0202);
114 lb035q02_write_reg(spi
, 0x3a, 0x0a0d);
115 lb035q02_write_reg(spi
, 0x3b, 0x0806);
118 static int lb035q02_connect(struct omap_dss_device
*dssdev
)
120 struct panel_drv_data
*ddata
= to_panel_data(dssdev
);
121 struct omap_dss_device
*in
= ddata
->in
;
124 if (omapdss_device_is_connected(dssdev
))
127 r
= in
->ops
.dpi
->connect(in
, dssdev
);
131 init_lb035q02_panel(ddata
->spi
);
136 static void lb035q02_disconnect(struct omap_dss_device
*dssdev
)
138 struct panel_drv_data
*ddata
= to_panel_data(dssdev
);
139 struct omap_dss_device
*in
= ddata
->in
;
141 if (!omapdss_device_is_connected(dssdev
))
144 in
->ops
.dpi
->disconnect(in
, dssdev
);
147 static int lb035q02_enable(struct omap_dss_device
*dssdev
)
149 struct panel_drv_data
*ddata
= to_panel_data(dssdev
);
150 struct omap_dss_device
*in
= ddata
->in
;
153 if (!omapdss_device_is_connected(dssdev
))
156 if (omapdss_device_is_enabled(dssdev
))
159 if (ddata
->data_lines
)
160 in
->ops
.dpi
->set_data_lines(in
, ddata
->data_lines
);
161 in
->ops
.dpi
->set_timings(in
, &ddata
->videomode
);
163 r
= in
->ops
.dpi
->enable(in
);
167 if (ddata
->enable_gpio
)
168 gpiod_set_value_cansleep(ddata
->enable_gpio
, 1);
170 dssdev
->state
= OMAP_DSS_DISPLAY_ACTIVE
;
175 static void lb035q02_disable(struct omap_dss_device
*dssdev
)
177 struct panel_drv_data
*ddata
= to_panel_data(dssdev
);
178 struct omap_dss_device
*in
= ddata
->in
;
180 if (!omapdss_device_is_enabled(dssdev
))
183 if (ddata
->enable_gpio
)
184 gpiod_set_value_cansleep(ddata
->enable_gpio
, 0);
186 in
->ops
.dpi
->disable(in
);
188 dssdev
->state
= OMAP_DSS_DISPLAY_DISABLED
;
191 static void lb035q02_set_timings(struct omap_dss_device
*dssdev
,
192 struct omap_video_timings
*timings
)
194 struct panel_drv_data
*ddata
= to_panel_data(dssdev
);
195 struct omap_dss_device
*in
= ddata
->in
;
197 ddata
->videomode
= *timings
;
198 dssdev
->panel
.timings
= *timings
;
200 in
->ops
.dpi
->set_timings(in
, timings
);
203 static void lb035q02_get_timings(struct omap_dss_device
*dssdev
,
204 struct omap_video_timings
*timings
)
206 struct panel_drv_data
*ddata
= to_panel_data(dssdev
);
208 *timings
= ddata
->videomode
;
211 static int lb035q02_check_timings(struct omap_dss_device
*dssdev
,
212 struct omap_video_timings
*timings
)
214 struct panel_drv_data
*ddata
= to_panel_data(dssdev
);
215 struct omap_dss_device
*in
= ddata
->in
;
217 return in
->ops
.dpi
->check_timings(in
, timings
);
220 static struct omap_dss_driver lb035q02_ops
= {
221 .connect
= lb035q02_connect
,
222 .disconnect
= lb035q02_disconnect
,
224 .enable
= lb035q02_enable
,
225 .disable
= lb035q02_disable
,
227 .set_timings
= lb035q02_set_timings
,
228 .get_timings
= lb035q02_get_timings
,
229 .check_timings
= lb035q02_check_timings
,
231 .get_resolution
= omapdss_default_get_resolution
,
234 static int lb035q02_probe_of(struct spi_device
*spi
)
236 struct device_node
*node
= spi
->dev
.of_node
;
237 struct panel_drv_data
*ddata
= dev_get_drvdata(&spi
->dev
);
238 struct omap_dss_device
*in
;
239 struct gpio_desc
*gpio
;
241 gpio
= devm_gpiod_get(&spi
->dev
, "enable", GPIOD_OUT_LOW
);
243 dev_err(&spi
->dev
, "failed to parse enable gpio\n");
244 return PTR_ERR(gpio
);
247 ddata
->enable_gpio
= gpio
;
249 in
= omapdss_of_find_source_for_first_ep(node
);
251 dev_err(&spi
->dev
, "failed to find video source\n");
260 static int lb035q02_panel_spi_probe(struct spi_device
*spi
)
262 struct panel_drv_data
*ddata
;
263 struct omap_dss_device
*dssdev
;
266 ddata
= devm_kzalloc(&spi
->dev
, sizeof(*ddata
), GFP_KERNEL
);
270 dev_set_drvdata(&spi
->dev
, ddata
);
274 if (!spi
->dev
.of_node
)
277 r
= lb035q02_probe_of(spi
);
281 ddata
->videomode
= lb035q02_timings
;
283 dssdev
= &ddata
->dssdev
;
284 dssdev
->dev
= &spi
->dev
;
285 dssdev
->driver
= &lb035q02_ops
;
286 dssdev
->type
= OMAP_DISPLAY_TYPE_DPI
;
287 dssdev
->owner
= THIS_MODULE
;
288 dssdev
->panel
.timings
= ddata
->videomode
;
289 dssdev
->phy
.dpi
.data_lines
= ddata
->data_lines
;
291 r
= omapdss_register_display(dssdev
);
293 dev_err(&spi
->dev
, "Failed to register panel\n");
300 omap_dss_put_device(ddata
->in
);
304 static int lb035q02_panel_spi_remove(struct spi_device
*spi
)
306 struct panel_drv_data
*ddata
= dev_get_drvdata(&spi
->dev
);
307 struct omap_dss_device
*dssdev
= &ddata
->dssdev
;
308 struct omap_dss_device
*in
= ddata
->in
;
310 omapdss_unregister_display(dssdev
);
312 lb035q02_disable(dssdev
);
313 lb035q02_disconnect(dssdev
);
315 omap_dss_put_device(in
);
320 static const struct of_device_id lb035q02_of_match
[] = {
321 { .compatible
= "omapdss,lgphilips,lb035q02", },
325 MODULE_DEVICE_TABLE(of
, lb035q02_of_match
);
327 static struct spi_driver lb035q02_spi_driver
= {
328 .probe
= lb035q02_panel_spi_probe
,
329 .remove
= lb035q02_panel_spi_remove
,
331 .name
= "panel_lgphilips_lb035q02",
332 .of_match_table
= lb035q02_of_match
,
333 .suppress_bind_attrs
= true,
337 module_spi_driver(lb035q02_spi_driver
);
339 MODULE_ALIAS("spi:lgphilips,lb035q02");
340 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
341 MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
342 MODULE_LICENSE("GPL");