drivers/media/rc/fintek-cir.h

   1 /*
   2  * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
   3  *
   4  * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
   5  *
   6  * Special thanks to Fintek for providing hardware and spec sheets.
   7  * This driver is based upon the nuvoton, ite and ene drivers for
   8  * similar hardware.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of the
  13  * License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful, but
  16  * WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  18  * General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  23  * USA
  24  */
  25
  26 #include <linux/spinlock.h>
  27 #include <linux/ioctl.h>
  28
  29 /* platform driver name to register */
  30 #define FINTEK_DRIVER_NAME      "fintek-cir"
  31 #define FINTEK_DESCRIPTION      "Fintek LPC SuperIO Consumer IR Transceiver"
  32 #define VENDOR_ID_FINTEK        0x1934
  33
  34
  35 /* debugging module parameter */
  36 static int debug;
  37
  38 #define fit_pr(level, text, ...) \
  39         printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
  40
  41 #define fit_dbg(text, ...) \
  42         if (debug) \
  43                 printk(KERN_DEBUG \
  44                         KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
  45
  46 #define fit_dbg_verbose(text, ...) \
  47         if (debug > 1) \
  48                 printk(KERN_DEBUG \
  49                         KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
  50
  51 #define fit_dbg_wake(text, ...) \
  52         if (debug > 2) \
  53                 printk(KERN_DEBUG \
  54                         KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
  55
  56
  57 #define TX_BUF_LEN 256
  58 #define RX_BUF_LEN 32
  59
  60 struct fintek_dev {
  61         struct pnp_dev *pdev;
  62         struct rc_dev *rdev;
  63
  64         spinlock_t fintek_lock;
  65
  66         /* for rx */
  67         u8 buf[RX_BUF_LEN];
  68         unsigned int pkts;
  69
  70         struct {
  71                 spinlock_t lock;
  72                 u8 buf[TX_BUF_LEN];
  73                 unsigned int buf_count;
  74                 unsigned int cur_buf_num;
  75                 wait_queue_head_t queue;
  76         } tx;
  77
  78         /* Config register index/data port pair */
  79         u32 cr_ip;
  80         u32 cr_dp;
  81
  82         /* hardware I/O settings */
  83         unsigned long cir_addr;
  84         int cir_irq;
  85         int cir_port_len;
  86
  87         /* hardware id */
  88         u8 chip_major;
  89         u8 chip_minor;
  90         u16 chip_vendor;
  91         u8 logical_dev_cir;
  92
  93         /* hardware features */
  94         bool hw_learning_capable;
  95         bool hw_tx_capable;
  96
  97         /* rx settings */
  98         bool learning_enabled;
  99         bool carrier_detect_enabled;
 100
 101         enum {
 102                 CMD_HEADER = 0,
 103                 SUBCMD,
 104                 CMD_DATA,
 105                 PARSE_IRDATA,
 106         } parser_state;
 107
 108         u8 cmd, rem;
 109
 110         /* carrier period = 1 / frequency */
 111         u32 carrier;
 112 };
 113
 114 /* buffer packet constants, largely identical to mceusb.c */
 115 #define BUF_PULSE_BIT           0x80
 116 #define BUF_LEN_MASK            0x1f
 117 #define BUF_SAMPLE_MASK         0x7f
 118
 119 #define BUF_COMMAND_HEADER      0x9f
 120 #define BUF_COMMAND_MASK        0xe0
 121 #define BUF_COMMAND_NULL        0x00
 122 #define BUF_HW_CMD_HEADER       0xff
 123 #define BUF_CMD_G_REVISION      0x0b
 124 #define BUF_CMD_S_CARRIER       0x06
 125 #define BUF_CMD_S_TIMEOUT       0x0c
 126 #define BUF_CMD_SIG_END         0x01
 127 #define BUF_CMD_S_TXMASK        0x08
 128 #define BUF_CMD_S_RXSENSOR      0x14
 129 #define BUF_RSP_PULSE_COUNT     0x15
 130
 131 #define CIR_SAMPLE_PERIOD       50
 132
 133 /*
 134  * Configuration Register:
 135  *  Index Port
 136  *  Data Port
 137  */
 138 #define CR_INDEX_PORT           0x2e
 139 #define CR_DATA_PORT            0x2f
 140
 141 /* Possible alternate values, depends on how the chip is wired */
 142 #define CR_INDEX_PORT2          0x4e
 143 #define CR_DATA_PORT2           0x4f
 144
 145 /*
 146  * GCR_CONFIG_PORT_SEL bit 4 specifies which Index Port value is
 147  * active. 1 = 0x4e, 0 = 0x2e
 148  */
 149 #define PORT_SEL_PORT_4E_EN     0x10
 150
 151 /* Extended Function Mode enable/disable magic values */
 152 #define CONFIG_REG_ENABLE       0x87
 153 #define CONFIG_REG_DISABLE      0xaa
 154
 155 /* Chip IDs found in CR_CHIP_ID_{HI,LO} */
 156 #define CHIP_ID_HIGH_F71809U    0x04
 157 #define CHIP_ID_LOW_F71809U     0x08
 158
 159 /*
 160  * Global control regs we need to care about:
 161  *      Global Control                  def.
 162  *      Register name           addr    val. */
 163 #define GCR_SOFTWARE_RESET      0x02 /* 0x00 */
 164 #define GCR_LOGICAL_DEV_NO      0x07 /* 0x00 */
 165 #define GCR_CHIP_ID_HI          0x20 /* 0x04 */
 166 #define GCR_CHIP_ID_LO          0x21 /* 0x08 */
 167 #define GCR_VENDOR_ID_HI        0x23 /* 0x19 */
 168 #define GCR_VENDOR_ID_LO        0x24 /* 0x34 */
 169 #define GCR_CONFIG_PORT_SEL     0x25 /* 0x01 */
 170 #define GCR_KBMOUSE_WAKEUP      0x27
 171
 172 #define LOGICAL_DEV_DISABLE     0x00
 173 #define LOGICAL_DEV_ENABLE      0x01
 174
 175 /* Logical device number of the CIR function */
 176 #define LOGICAL_DEV_CIR_REV1    0x05
 177 #define LOGICAL_DEV_CIR_REV2    0x08
 178
 179 /* CIR Logical Device (LDN 0x08) config registers */
 180 #define CIR_CR_COMMAND_INDEX    0x04
 181 #define CIR_CR_IRCS             0x05 /* Before host writes command to IR, host
 182                                         must set to 1. When host finshes write
 183                                         command to IR, host must clear to 0. */
 184 #define CIR_CR_COMMAND_DATA     0x06 /* Host read or write comand data */
 185 #define CIR_CR_CLASS            0x07 /* 0xff = rx-only, 0x66 = rx + 2 tx,
 186                                         0x33 = rx + 1 tx */
 187 #define CIR_CR_DEV_EN           0x30 /* bit0 = 1 enables CIR */
 188 #define CIR_CR_BASE_ADDR_HI     0x60 /* MSB of CIR IO base addr */
 189 #define CIR_CR_BASE_ADDR_LO     0x61 /* LSB of CIR IO base addr */
 190 #define CIR_CR_IRQ_SEL          0x70 /* bits3-0 store CIR IRQ */
 191 #define CIR_CR_PSOUT_STATUS     0xf1
 192 #define CIR_CR_WAKE_KEY3_ADDR   0xf8
 193 #define CIR_CR_WAKE_KEY3_CODE   0xf9
 194 #define CIR_CR_WAKE_KEY3_DC     0xfa
 195 #define CIR_CR_WAKE_CONTROL     0xfb
 196 #define CIR_CR_WAKE_KEY12_ADDR  0xfc
 197 #define CIR_CR_WAKE_KEY4_ADDR   0xfd
 198 #define CIR_CR_WAKE_KEY5_ADDR   0xfe
 199
 200 #define CLASS_RX_ONLY           0xff
 201 #define CLASS_RX_2TX            0x66
 202 #define CLASS_RX_1TX            0x33
 203
 204 /* CIR device registers */
 205 #define CIR_STATUS              0x00
 206 #define CIR_RX_DATA             0x01
 207 #define CIR_TX_CONTROL          0x02
 208 #define CIR_TX_DATA             0x03
 209 #define CIR_CONTROL             0x04
 210
 211 /* Bits to enable CIR wake */
 212 #define LOGICAL_DEV_ACPI        0x01
 213 #define LDEV_ACPI_WAKE_EN_REG   0xe8
 214 #define ACPI_WAKE_EN_CIR_BIT    0x04
 215
 216 #define LDEV_ACPI_PME_EN_REG    0xf0
 217 #define LDEV_ACPI_PME_CLR_REG   0xf1
 218 #define ACPI_PME_CIR_BIT        0x02
 219
 220 #define LDEV_ACPI_STATE_REG     0xf4
 221 #define ACPI_STATE_CIR_BIT      0x20
 222
 223 /*
 224  * CIR status register (0x00):
 225  *   7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable)
 226  *   3 - TX_FINISH (1 when TX finished, write 1 to clear)
 227  *   2 - TX_UNDERRUN (1 on TX underrun, write 1 to clear)
 228  *   1 - RX_TIMEOUT (1 on RX timeout, write 1 to clear)
 229  *   0 - RX_RECEIVE (1 on RX receive, write 1 to clear)
 230  */
 231 #define CIR_STATUS_IRQ_EN       0x80
 232 #define CIR_STATUS_TX_FINISH    0x08
 233 #define CIR_STATUS_TX_UNDERRUN  0x04
 234 #define CIR_STATUS_RX_TIMEOUT   0x02
 235 #define CIR_STATUS_RX_RECEIVE   0x01
 236 #define CIR_STATUS_IRQ_MASK     0x0f
 237
 238 /*
 239  * CIR TX control register (0x02):
 240  *   7 - TX_START (1 to indicate TX start, auto-cleared when done)
 241  *   6 - TX_END (1 to indicate TX data written to TX fifo)
 242  */
 243 #define CIR_TX_CONTROL_TX_START 0x80
 244 #define CIR_TX_CONTROL_TX_END   0x40
 245