Input: xpad - add support for Xbox1 PDP Camo series gamepad

[linux/fpc-iii.git] / drivers / scsi / mpt3sas / mpt3sas_config.c

/*
 * This module provides common API for accessing firmware configuration pages
 *
 * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
 * Copyright (C) 2012-2014  LSI Corporation
 * Copyright (C) 2013-2014 Avago Technologies
 *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * NO WARRANTY
 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
 * solely responsible for determining the appropriateness of using and
 * distributing the Program and assumes all risks associated with its
 * exercise of rights under this Agreement, including but not limited to
 * the risks and costs of program errors, damage to or loss of data,
 * programs or equipment, and unavailability or interruption of operations.

 * DISCLAIMER OF LIABILITY
 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
 * USA.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/pci.h>

#include "mpt3sas_base.h"

/* local definitions */

/* Timeout for config page request (in seconds) */
#define MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT 15

/* Common sgl flags for READING a config page. */
#define MPT3_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
        MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
        | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT)

/* Common sgl flags for WRITING a config page. */
#define MPT3_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
        MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
        | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \
        << MPI2_SGE_FLAGS_SHIFT)

/**
 * struct config_request - obtain dma memory via routine
 * @sz: size
 * @page: virt pointer
 * @page_dma: phys pointer
 *
 */
struct config_request {
        u16                     sz;
        void                    *page;
        dma_addr_t              page_dma;
};

/**
 * _config_display_some_debug - debug routine
 * @ioc: per adapter object
 * @smid: system request message index
 * @calling_function_name: string pass from calling function
 * @mpi_reply: reply message frame
 * Context: none.
 *
 * Function for displaying debug info helpful when debugging issues
 * in this module.
 */
static void
_config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
        char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
{
        Mpi2ConfigRequest_t *mpi_request;
        char *desc = NULL;

        if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
                return;

        mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
        switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
        case MPI2_CONFIG_PAGETYPE_IO_UNIT:
                desc = "io_unit";
                break;
        case MPI2_CONFIG_PAGETYPE_IOC:
                desc = "ioc";
                break;
        case MPI2_CONFIG_PAGETYPE_BIOS:
                desc = "bios";
                break;
        case MPI2_CONFIG_PAGETYPE_RAID_VOLUME:
                desc = "raid_volume";
                break;
        case MPI2_CONFIG_PAGETYPE_MANUFACTURING:
                desc = "manufaucturing";
                break;
        case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK:
                desc = "physdisk";
                break;
        case MPI2_CONFIG_PAGETYPE_EXTENDED:
                switch (mpi_request->ExtPageType) {
                case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT:
                        desc = "sas_io_unit";
                        break;
                case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER:
                        desc = "sas_expander";
                        break;
                case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE:
                        desc = "sas_device";
                        break;
                case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY:
                        desc = "sas_phy";
                        break;
                case MPI2_CONFIG_EXTPAGETYPE_LOG:
                        desc = "log";
                        break;
                case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE:
                        desc = "enclosure";
                        break;
                case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG:
                        desc = "raid_config";
                        break;
                case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
                        desc = "driver_mapping";
                        break;
                }
                break;
        }

        if (!desc)
                return;

        pr_info(MPT3SAS_FMT
                "%s: %s(%d), action(%d), form(0x%08x), smid(%d)\n",
                ioc->name, calling_function_name, desc,
            mpi_request->Header.PageNumber, mpi_request->Action,
            le32_to_cpu(mpi_request->PageAddress), smid);

        if (!mpi_reply)
                return;

        if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
                pr_info(MPT3SAS_FMT
                    "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
                    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
                    le32_to_cpu(mpi_reply->IOCLogInfo));
}

/**
 * _config_alloc_config_dma_memory - obtain physical memory
 * @ioc: per adapter object
 * @mem: struct config_request
 *
 * A wrapper for obtaining dma-able memory for config page request.
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
        struct config_request *mem)
{
        int r = 0;

        if (mem->sz > ioc->config_page_sz) {
                mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz,
                    &mem->page_dma, GFP_KERNEL);
                if (!mem->page) {
                        pr_err(MPT3SAS_FMT
                                "%s: dma_alloc_coherent failed asking for (%d) bytes!!\n",
                            ioc->name, __func__, mem->sz);
                        r = -ENOMEM;
                }
        } else { /* use tmp buffer if less than 512 bytes */
                mem->page = ioc->config_page;
                mem->page_dma = ioc->config_page_dma;
        }
        return r;
}

/**
 * _config_free_config_dma_memory - wrapper to free the memory
 * @ioc: per adapter object
 * @mem: struct config_request
 *
 * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory.
 *
 * Returns 0 for success, non-zero for failure.
 */
static void
_config_free_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
        struct config_request *mem)
{
        if (mem->sz > ioc->config_page_sz)
                dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page,
                    mem->page_dma);
}

/**
 * mpt3sas_config_done - config page completion routine
 * @ioc: per adapter object
 * @smid: system request message index
 * @msix_index: MSIX table index supplied by the OS
 * @reply: reply message frame(lower 32bit addr)
 * Context: none.
 *
 * The callback handler when using _config_request.
 *
 * Return 1 meaning mf should be freed from _base_interrupt
 *        0 means the mf is freed from this function.
 */
u8
mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
        u32 reply)
{
        MPI2DefaultReply_t *mpi_reply;

        if (ioc->config_cmds.status == MPT3_CMD_NOT_USED)
                return 1;
        if (ioc->config_cmds.smid != smid)
                return 1;
        ioc->config_cmds.status |= MPT3_CMD_COMPLETE;
        mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
        if (mpi_reply) {
                ioc->config_cmds.status |= MPT3_CMD_REPLY_VALID;
                memcpy(ioc->config_cmds.reply, mpi_reply,
                    mpi_reply->MsgLength*4);
        }
        ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
        _config_display_some_debug(ioc, smid, "config_done", mpi_reply);
        ioc->config_cmds.smid = USHRT_MAX;
        complete(&ioc->config_cmds.done);
        return 1;
}

/**
 * _config_request - main routine for sending config page requests
 * @ioc: per adapter object
 * @mpi_request: request message frame
 * @mpi_reply: reply mf payload returned from firmware
 * @timeout: timeout in seconds
 * @config_page: contents of the config page
 * @config_page_sz: size of config page
 * Context: sleep
 *
 * A generic API for config page requests to firmware.
 *
 * The ioc->config_cmds.status flag should be MPT3_CMD_NOT_USED before calling
 * this API.
 *
 * The callback index is set inside `ioc->config_cb_idx.
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
        *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout,
        void *config_page, u16 config_page_sz)
{
        u16 smid;
        u32 ioc_state;
        Mpi2ConfigRequest_t *config_request;
        int r;
        u8 retry_count, issue_host_reset = 0;
        u16 wait_state_count;
        struct config_request mem;
        u32 ioc_status = UINT_MAX;

        mutex_lock(&ioc->config_cmds.mutex);
        if (ioc->config_cmds.status != MPT3_CMD_NOT_USED) {
                pr_err(MPT3SAS_FMT "%s: config_cmd in use\n",
                    ioc->name, __func__);
                mutex_unlock(&ioc->config_cmds.mutex);
                return -EAGAIN;
        }

        retry_count = 0;
        memset(&mem, 0, sizeof(struct config_request));

        mpi_request->VF_ID = 0; /* TODO */
        mpi_request->VP_ID = 0;

        if (config_page) {
                mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
                mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
                mpi_request->Header.PageType = mpi_reply->Header.PageType;
                mpi_request->Header.PageLength = mpi_reply->Header.PageLength;
                mpi_request->ExtPageLength = mpi_reply->ExtPageLength;
                mpi_request->ExtPageType = mpi_reply->ExtPageType;
                if (mpi_request->Header.PageLength)
                        mem.sz = mpi_request->Header.PageLength * 4;
                else
                        mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4;
                r = _config_alloc_config_dma_memory(ioc, &mem);
                if (r != 0)
                        goto out;
                if (mpi_request->Action ==
                    MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
                    mpi_request->Action ==
                    MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
                        ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
                            MPT3_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
                            mem.page_dma);
                        memcpy(mem.page, config_page, min_t(u16, mem.sz,
                            config_page_sz));
                } else {
                        memset(config_page, 0, config_page_sz);
                        ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
                            MPT3_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma);
                        memset(mem.page, 0, min_t(u16, mem.sz, config_page_sz));
                }
        }

 retry_config:
        if (retry_count) {
                if (retry_count > 2) { /* attempt only 2 retries */
                        r = -EFAULT;
                        goto free_mem;
                }
                pr_info(MPT3SAS_FMT "%s: attempting retry (%d)\n",
                    ioc->name, __func__, retry_count);
        }
        wait_state_count = 0;
        ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
        while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
                if (wait_state_count++ == MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT) {
                        pr_err(MPT3SAS_FMT
                            "%s: failed due to ioc not operational\n",
                            ioc->name, __func__);
                        ioc->config_cmds.status = MPT3_CMD_NOT_USED;
                        r = -EFAULT;
                        goto free_mem;
                }
                ssleep(1);
                ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
                pr_info(MPT3SAS_FMT
                        "%s: waiting for operational state(count=%d)\n",
                        ioc->name, __func__, wait_state_count);
        }
        if (wait_state_count)
                pr_info(MPT3SAS_FMT "%s: ioc is operational\n",
                    ioc->name, __func__);

        smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx);
        if (!smid) {
                pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
                    ioc->name, __func__);
                ioc->config_cmds.status = MPT3_CMD_NOT_USED;
                r = -EAGAIN;
                goto free_mem;
        }

        r = 0;
        memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t));
        ioc->config_cmds.status = MPT3_CMD_PENDING;
        config_request = mpt3sas_base_get_msg_frame(ioc, smid);
        ioc->config_cmds.smid = smid;
        memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
        _config_display_some_debug(ioc, smid, "config_request", NULL);
        init_completion(&ioc->config_cmds.done);
        mpt3sas_base_put_smid_default(ioc, smid);
        wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ);
        if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
                pr_err(MPT3SAS_FMT "%s: timeout\n",
                    ioc->name, __func__);
                _debug_dump_mf(mpi_request,
                    sizeof(Mpi2ConfigRequest_t)/4);
                retry_count++;
                if (ioc->config_cmds.smid == smid)
                        mpt3sas_base_free_smid(ioc, smid);
                if ((ioc->shost_recovery) || (ioc->config_cmds.status &
                    MPT3_CMD_RESET) || ioc->pci_error_recovery)
                        goto retry_config;
                issue_host_reset = 1;
                r = -EFAULT;
                goto free_mem;
        }

        if (ioc->config_cmds.status & MPT3_CMD_REPLY_VALID) {
                memcpy(mpi_reply, ioc->config_cmds.reply,
                    sizeof(Mpi2ConfigReply_t));

                /* Reply Frame Sanity Checks to workaround FW issues */
                if ((mpi_request->Header.PageType & 0xF) !=
                    (mpi_reply->Header.PageType & 0xF)) {
                        _debug_dump_mf(mpi_request, ioc->request_sz/4);
                        _debug_dump_reply(mpi_reply, ioc->request_sz/4);
                        panic(KERN_WARNING MPT3SAS_FMT "%s: Firmware BUG:" \
                            " mpi_reply mismatch: Requested PageType(0x%02x)" \
                            " Reply PageType(0x%02x)\n", \
                            ioc->name, __func__,
                            (mpi_request->Header.PageType & 0xF),
                            (mpi_reply->Header.PageType & 0xF));
                }

                if (((mpi_request->Header.PageType & 0xF) ==
                    MPI2_CONFIG_PAGETYPE_EXTENDED) &&
                    mpi_request->ExtPageType != mpi_reply->ExtPageType) {
                        _debug_dump_mf(mpi_request, ioc->request_sz/4);
                        _debug_dump_reply(mpi_reply, ioc->request_sz/4);
                        panic(KERN_WARNING MPT3SAS_FMT "%s: Firmware BUG:" \
                            " mpi_reply mismatch: Requested ExtPageType(0x%02x)"
                            " Reply ExtPageType(0x%02x)\n",
                            ioc->name, __func__, mpi_request->ExtPageType,
                            mpi_reply->ExtPageType);
                }
                ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
                    & MPI2_IOCSTATUS_MASK;
        }

        if (retry_count)
                pr_info(MPT3SAS_FMT "%s: retry (%d) completed!!\n", \
                    ioc->name, __func__, retry_count);

        if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) &&
            config_page && mpi_request->Action ==
            MPI2_CONFIG_ACTION_PAGE_READ_CURRENT) {
                u8 *p = (u8 *)mem.page;

                /* Config Page Sanity Checks to workaround FW issues */
                if (p) {
                        if ((mpi_request->Header.PageType & 0xF) !=
                            (p[3] & 0xF)) {
                                _debug_dump_mf(mpi_request, ioc->request_sz/4);
                                _debug_dump_reply(mpi_reply, ioc->request_sz/4);
                                _debug_dump_config(p, min_t(u16, mem.sz,
                                    config_page_sz)/4);
                                panic(KERN_WARNING MPT3SAS_FMT
                                        "%s: Firmware BUG:" \
                                    " config page mismatch:"
                                    " Requested PageType(0x%02x)"
                                    " Reply PageType(0x%02x)\n",
                                    ioc->name, __func__,
                                    (mpi_request->Header.PageType & 0xF),
                                    (p[3] & 0xF));
                        }

                        if (((mpi_request->Header.PageType & 0xF) ==
                            MPI2_CONFIG_PAGETYPE_EXTENDED) &&
                            (mpi_request->ExtPageType != p[6])) {
                                _debug_dump_mf(mpi_request, ioc->request_sz/4);
                                _debug_dump_reply(mpi_reply, ioc->request_sz/4);
                                _debug_dump_config(p, min_t(u16, mem.sz,
                                    config_page_sz)/4);
                                panic(KERN_WARNING MPT3SAS_FMT
                                        "%s: Firmware BUG:" \
                                    " config page mismatch:"
                                    " Requested ExtPageType(0x%02x)"
                                    " Reply ExtPageType(0x%02x)\n",
                                    ioc->name, __func__,
                                    mpi_request->ExtPageType, p[6]);
                        }
                }
                memcpy(config_page, mem.page, min_t(u16, mem.sz,
                    config_page_sz));
        }

 free_mem:
        if (config_page)
                _config_free_config_dma_memory(ioc, &mem);
 out:
        ioc->config_cmds.status = MPT3_CMD_NOT_USED;
        mutex_unlock(&ioc->config_cmds.mutex);

        if (issue_host_reset)
                mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
        return r;
}

/**
 * mpt3sas_config_get_manufacturing_pg0 - obtain manufacturing page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_manufacturing_pg7 - obtain manufacturing page 7
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @sz: size of buffer passed in config_page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
        u16 sz)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
        mpi_request.Header.PageNumber = 7;
        mpi_request.Header.PageVersion = MPI2_MANUFACTURING7_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sz);
 out:
        return r;
}

/**
 * mpt3sas_config_get_manufacturing_pg10 - obtain manufacturing page 10
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply,
        struct Mpi2ManufacturingPage10_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
        mpi_request.Header.PageNumber = 10;
        mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_manufacturing_pg11 - obtain manufacturing page 11
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply,
        struct Mpi2ManufacturingPage11_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
        mpi_request.Header.PageNumber = 11;
        mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_set_manufacturing_pg11 - set manufacturing page 11
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply,
        struct Mpi2ManufacturingPage11_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
        mpi_request.Header.PageNumber = 11;
        mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_bios_pg2 - obtain bios page 2
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
        mpi_request.Header.PageNumber = 2;
        mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_bios_pg3 - obtain bios page 3
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
        *mpi_reply, Mpi2BiosPage3_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
        mpi_request.Header.PageNumber = 3;
        mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_iounit_pg0 - obtain iounit page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_iounit_pg1 - obtain iounit page 1
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
        mpi_request.Header.PageNumber = 1;
        mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_set_iounit_pg1 - set iounit page 1
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
        mpi_request.Header.PageNumber = 1;
        mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_iounit_pg3 - obtain iounit page 3
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @sz: size of buffer passed in config_page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
        mpi_request.Header.PageNumber = 3;
        mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
 out:
        return r;
}

/**
 * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
        mpi_request.Header.PageNumber = 8;
        mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_ioc_pg8 - obtain ioc page 8
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
        mpi_request.Header.PageNumber = 8;
        mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @form: GET_NEXT_HANDLE or HANDLE
 * @handle: device handle
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
        u32 form, u32 handle)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
        mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
        mpi_request.Header.PageNumber = 0;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress = cpu_to_le32(form | handle);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_sas_device_pg1 - obtain sas device page 1
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @form: GET_NEXT_HANDLE or HANDLE
 * @handle: device handle
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
        u32 form, u32 handle)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
        mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION;
        mpi_request.Header.PageNumber = 1;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress = cpu_to_le32(form | handle);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_number_hba_phys - obtain number of phys on the host
 * @ioc: per adapter object
 * @num_phys: pointer returned with the number of phys
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, u8 *num_phys)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;
        u16 ioc_status;
        Mpi2ConfigReply_t mpi_reply;
        Mpi2SasIOUnitPage0_t config_page;

        *num_phys = 0;
        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, &mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, &mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
            sizeof(Mpi2SasIOUnitPage0_t));
        if (!r) {
                ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
                    MPI2_IOCSTATUS_MASK;
                if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
                        *num_phys = config_page.NumPhys;
        }
 out:
        return r;
}

/**
 * mpt3sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @sz: size of buffer passed in config_page
 * Context: sleep.
 *
 * Calling function should call config_get_number_hba_phys prior to
 * this function, so enough memory is allocated for config_page.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
        u16 sz)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
 out:
        return r;
}

/**
 * mpt3sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @sz: size of buffer passed in config_page
 * Context: sleep.
 *
 * Calling function should call config_get_number_hba_phys prior to
 * this function, so enough memory is allocated for config_page.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
        u16 sz)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
        mpi_request.Header.PageNumber = 1;
        mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
 out:
        return r;
}

/**
 * mpt3sas_config_set_sas_iounit_pg1 - send sas iounit page 1
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @sz: size of buffer passed in config_page
 * Context: sleep.
 *
 * Calling function should call config_get_number_hba_phys prior to
 * this function, so enough memory is allocated for config_page.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
        u16 sz)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
        mpi_request.Header.PageNumber = 1;
        mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
        _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
 out:
        return r;
}

/**
 * mpt3sas_config_get_expander_pg0 - obtain expander page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @form: GET_NEXT_HANDLE or HANDLE
 * @handle: expander handle
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
        *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress = cpu_to_le32(form | handle);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_expander_pg1 - obtain expander page 1
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @phy_number: phy number
 * @handle: expander handle
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
        *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number,
        u16 handle)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
        mpi_request.Header.PageNumber = 1;
        mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress =
            cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM |
            (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_enclosure_pg0 - obtain enclosure page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @form: GET_NEXT_HANDLE or HANDLE
 * @handle: expander handle
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
        *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress = cpu_to_le32(form | handle);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_phy_pg0 - obtain phy page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @phy_number: phy number
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
        *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress =
            cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_phy_pg1 - obtain phy page 1
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @phy_number: phy number
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
        *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
        mpi_request.Header.PageNumber = 1;
        mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress =
            cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_raid_volume_pg1 - obtain raid volume page 1
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @form: GET_NEXT_HANDLE or HANDLE
 * @handle: volume handle
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
        u32 handle)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
        mpi_request.Header.PageNumber = 1;
        mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress = cpu_to_le32(form | handle);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_number_pds - obtain number of phys disk assigned to volume
 * @ioc: per adapter object
 * @handle: volume handle
 * @num_pds: returns pds count
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
        u8 *num_pds)
{
        Mpi2ConfigRequest_t mpi_request;
        Mpi2RaidVolPage0_t config_page;
        Mpi2ConfigReply_t mpi_reply;
        int r;
        u16 ioc_status;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        *num_pds = 0;
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, &mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress =
            cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, &mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
            sizeof(Mpi2RaidVolPage0_t));
        if (!r) {
                ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
                    MPI2_IOCSTATUS_MASK;
                if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
                        *num_pds = config_page.NumPhysDisks;
        }

 out:
        return r;
}

/**
 * mpt3sas_config_get_raid_volume_pg0 - obtain raid volume page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @form: GET_NEXT_HANDLE or HANDLE
 * @handle: volume handle
 * @sz: size of buffer passed in config_page
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
        Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
        u32 handle, u16 sz)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress = cpu_to_le32(form | handle);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
 out:
        return r;
}

/**
 * mpt3sas_config_get_phys_disk_pg0 - obtain phys disk page 0
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @config_page: contents of the config page
 * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE
 * @form_specific: specific to the form
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
        *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
        u32 form_specific)
{
        Mpi2ConfigRequest_t mpi_request;
        int r;

        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
        mpi_request.Header.PageNumber = 0;
        mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.PageAddress = cpu_to_le32(form | form_specific);
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        r = _config_request(ioc, &mpi_request, mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
            sizeof(*config_page));
 out:
        return r;
}

/**
 * mpt3sas_config_get_volume_handle - returns volume handle for give hidden
 * raid components
 * @ioc: per adapter object
 * @pd_handle: phys disk handle
 * @volume_handle: volume handle
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
        u16 *volume_handle)
{
        Mpi2RaidConfigurationPage0_t *config_page = NULL;
        Mpi2ConfigRequest_t mpi_request;
        Mpi2ConfigReply_t mpi_reply;
        int r, i, config_page_sz;
        u16 ioc_status;
        int config_num;
        u16 element_type;
        u16 phys_disk_dev_handle;

        *volume_handle = 0;
        memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
        mpi_request.Function = MPI2_FUNCTION_CONFIG;
        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
        mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
        mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG;
        mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION;
        mpi_request.Header.PageNumber = 0;
        ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
        r = _config_request(ioc, &mpi_request, &mpi_reply,
            MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
        if (r)
                goto out;

        mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
        config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
        config_page = kmalloc(config_page_sz, GFP_KERNEL);
        if (!config_page) {
                r = -1;
                goto out;
        }

        config_num = 0xff;
        while (1) {
                mpi_request.PageAddress = cpu_to_le32(config_num +
                    MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
                r = _config_request(ioc, &mpi_request, &mpi_reply,
                    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
                    config_page_sz);
                if (r)
                        goto out;
                r = -1;
                ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
                    MPI2_IOCSTATUS_MASK;
                if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
                        goto out;
                for (i = 0; i < config_page->NumElements; i++) {
                        element_type = le16_to_cpu(config_page->
                            ConfigElement[i].ElementFlags) &
                            MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
                        if (element_type ==
                            MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
                            element_type ==
                            MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
                                phys_disk_dev_handle =
                                    le16_to_cpu(config_page->ConfigElement[i].
                                    PhysDiskDevHandle);
                                if (phys_disk_dev_handle == pd_handle) {
                                        *volume_handle =
                                            le16_to_cpu(config_page->
                                            ConfigElement[i].VolDevHandle);
                                        r = 0;
                                        goto out;
                                }
                        } else if (element_type ==
                            MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
                                *volume_handle = 0;
                                r = 0;
                                goto out;
                        }
                }
                config_num = config_page->ConfigNum;
        }
 out:
        kfree(config_page);
        return r;
}

/**
 * mpt3sas_config_get_volume_wwid - returns wwid given the volume handle
 * @ioc: per adapter object
 * @volume_handle: volume handle
 * @wwid: volume wwid
 * Context: sleep.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle,
        u64 *wwid)
{
        Mpi2ConfigReply_t mpi_reply;
        Mpi2RaidVolPage1_t raid_vol_pg1;

        *wwid = 0;
        if (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
            &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE,
            volume_handle))) {
                *wwid = le64_to_cpu(raid_vol_pg1.WWID);
                return 0;
        } else
                return -1;
}